From 60fd6260b95af92864e0038226b58de78d7fb9a6 Mon Sep 17 00:00:00 2001 From: "Justin M. Forbes" Date: Mon, 29 Jun 2020 09:39:00 -0500 Subject: Linux v5.7.6 rebase Signed-off-by: Justin M. Forbes --- ...rx2-Fix-for-errata-that-affects-stop-engi.patch | 89 ++++++++++++++++++++++ 1 file changed, 89 insertions(+) create mode 100644 0001-ahci-thunderx2-Fix-for-errata-that-affects-stop-engi.patch (limited to '0001-ahci-thunderx2-Fix-for-errata-that-affects-stop-engi.patch') diff --git a/0001-ahci-thunderx2-Fix-for-errata-that-affects-stop-engi.patch b/0001-ahci-thunderx2-Fix-for-errata-that-affects-stop-engi.patch new file mode 100644 index 000000000..0299e965c --- /dev/null +++ b/0001-ahci-thunderx2-Fix-for-errata-that-affects-stop-engi.patch @@ -0,0 +1,89 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Robert Richter +Date: Thu, 7 Jun 2018 22:59:33 -0400 +Subject: [PATCH] ahci: thunderx2: Fix for errata that affects stop engine + +Message-id: <1528412373-19128-3-git-send-email-rrichter@redhat.com> +Patchwork-id: 220952 +O-Subject: [RHEL-8.0 BZ 1563590 v2 2/2] ahci: thunderx2: Fix for errata that affects stop engine +Bugzilla: 1563590 +RH-Acked-by: Dean Nelson +RH-Acked-by: Mark Langsdorf +RH-Acked-by: Mark Salter + +From: Jayachandran C + +Apply workaround for this errata: + Synopsis: Resetting PxCMD.ST may hang the SATA device + + Description: An internal ping-pong buffer state is not reset + correctly for an PxCMD.ST=0 command for a SATA channel. This + may cause the SATA interface to hang when a PxCMD.ST=0 command + is received. + + Workaround: A SATA_BIU_CORE_ENABLE.sw_init_bsi must be asserted + by the driver whenever the PxCMD.ST needs to be de-asserted. This + will reset both the ports. So, it may not always work in a 2 + channel SATA system. + + Resolution: Fix in B0. + +Add the code to ahci_stop_engine() to do this. It is not easy to +stop the other "port" since it is associated with a different AHCI +interface. Please note that with this fix, SATA reset does not +hang any more, but it can cause failures on the other interface +if that is in active use. + +Unfortunately, we have nothing other the the CPU ID to check if the +SATA block has this issue. + +RHEL-only: + +Both patches are in RHEL-7.6 also. Inclusion of the patches into RHEL-8 +was discussed. Since there are partners with Ax system configurations it +was decided to carry them in RHEL8 too. See: + + https://bugzilla.redhat.com/show_bug.cgi?id=1563590#c1 + +[v3 with new delays] +Signed-off-by: Jayachandran C + +Upstream Status: RHEL only +Signed-off-by: Robert Richter +Signed-off-by: Herton R. Krzesinski +--- + drivers/ata/libahci.c | 18 ++++++++++++++++++ + 1 file changed, 18 insertions(+) + +diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c +index ea5bf5f4cbed..71c55cae27ac 100644 +--- a/drivers/ata/libahci.c ++++ b/drivers/ata/libahci.c +@@ -666,6 +666,24 @@ int ahci_stop_engine(struct ata_port *ap) + tmp &= ~PORT_CMD_START; + writel(tmp, port_mmio + PORT_CMD); + ++#ifdef CONFIG_ARM64 ++ /* Rev Ax of Cavium CN99XX needs a hack for port stop */ ++ if (dev_is_pci(ap->host->dev) && ++ to_pci_dev(ap->host->dev)->vendor == 0x14e4 && ++ to_pci_dev(ap->host->dev)->device == 0x9027 && ++ midr_is_cpu_model_range(read_cpuid_id(), ++ MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_VULCAN), ++ MIDR_CPU_VAR_REV(0, 0), ++ MIDR_CPU_VAR_REV(0, MIDR_REVISION_MASK))) { ++ tmp = readl(hpriv->mmio + 0x8000); ++ udelay(100); ++ writel(tmp | (1 << 26), hpriv->mmio + 0x8000); ++ udelay(100); ++ writel(tmp & ~(1 << 26), hpriv->mmio + 0x8000); ++ dev_warn(ap->host->dev, "CN99XX SATA reset workaround applied\n"); ++ } ++#endif ++ + /* wait for engine to stop. This could be as long as 500 msec */ + tmp = ata_wait_register(ap, port_mmio + PORT_CMD, + PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); +-- +2.26.2 + -- cgit