diff options
Diffstat (limited to 'kernel.spec')
| -rw-r--r-- | kernel.spec | 1479 |
1 files changed, 532 insertions, 947 deletions
diff --git a/kernel.spec b/kernel.spec index f14008fc0..2aa6271ff 100644 --- a/kernel.spec +++ b/kernel.spec @@ -1,7 +1,8 @@ # We have to override the new %%install behavior because, well... the kernel is special. %global __spec_install_pre %{___build_pre} -# this should go away soon +# Short-term fix so the package builds with GCC 10. +# This should go away soon. %define _legacy_common_support 1 # At the time of this writing (2019-03), RHEL8 packages use w2.xzdio @@ -29,6 +30,8 @@ Summary: The Linux kernel # For a stable, released kernel, released_kernel should be 1. %global released_kernel 0 +%global distro_build 0.rc1.20200414git8632e9b5645b.1 + %if 0%{?fedora} %define secure_boot_arch x86_64 %else @@ -58,60 +61,20 @@ Summary: The Linux kernel # define buildid .local + %if 0%{?fedora} %define primary_target fedora %else %define primary_target rhel %endif -# baserelease defines which build revision of this kernel version we're -# building. We used to call this fedora_build, but the magical name -# baserelease is matched by the rpmdev-bumpspec tool, which you should use. -# -# We used to have some extra magic weirdness to bump this automatically, -# but now we don't. Just use: rpmdev-bumpspec -c 'comment for changelog' -# When changing base_sublevel below or going from rc to a final kernel, -# reset this by hand to 1 (or to 0 and then use rpmdev-bumpspec). -# scripts/rebase.sh should be made to do that for you, actually. -# -# NOTE: baserelease must be > 0 or bad things will happen if you switch -# to a released kernel (released version will be < rc version) -# -# For non-released -rc kernels, this will be appended after the rcX and -# gitX tags, so a 3 here would become part of release "0.rcX.gitX.3" -# -%global baserelease 1 -%global fedora_build %{baserelease} - -# base_sublevel is the kernel version we're starting with and patching -# on top of -- for example, 3.1-rc7-git1 starts with a 3.0 base, -# which yields a base_sublevel of 0. -%define base_sublevel 6 +%define rpmversion 5.7.0 +%define pkgrelease 0.rc1.20200414git8632e9b5645b.1 -## If this is a released kernel ## -%if 0%{?released_kernel} +# allow pkg_release to have configurable %%{?dist} tag +%define specrelease 0.rc1.20200414git8632e9b5645b.1%{?dist} -# Do we have a -stable update to apply? -%define stable_update 0 -# Set rpm version accordingly -%if 0%{?stable_update} -%define stablerev %{stable_update} -%define stable_base %{stable_update} -%endif -%define rpmversion 5.%{base_sublevel}.%{stable_update} - -## The not-released-kernel case ## -%else -# The next upstream release sublevel (base_sublevel+1) -%define upstream_sublevel %(echo $((%{base_sublevel} + 1))) -# The rc snapshot level -%global rcrev 1 -# The git snapshot level -%define gitrev 0 -# Set rpm version accordingly -%define rpmversion 5.%{upstream_sublevel}.0 -%endif -# Nb: The above rcrev and gitrev values automagically define Patch00 and Patch01 below. +%define pkg_release %{specrelease}%{?buildid} # What parts do we want to build? We must build at least one kernel. # These are the kernels that are built IF the architecture allows it. @@ -200,7 +163,10 @@ Summary: The Linux kernel # Set debugbuildsenabled to 1 for production (build separate debug kernels) # and 0 for rawhide (all kernels are debug kernels). # See also 'make debug' and 'make release'. -%define debugbuildsenabled 1 +%define debugbuildsenabled 0 + +# The kernel tarball/base version +%define kversion 5.7 %if 0%{?fedora} # Kernel headers are being split out into a separate package @@ -224,32 +190,6 @@ Summary: The Linux kernel %define make_opts -s %endif -# pkg_release is what we'll fill in for the rpm Release: field -%if 0%{?released_kernel} - -%define pkg_release %{fedora_build}%{?buildid}%{?dist} - -%else - -# non-released_kernel -%if 0%{?rcrev} -%define rctag .rc%rcrev -%else -%define rctag .rc0 -%endif -%if 0%{?gitrev} -%define gittag .git%gitrev -%else -%define gittag .git0 -%endif -%define pkg_release 0%{?rctag}%{?gittag}.%{fedora_build}%{?buildid}%{?dist} - -%endif - -# The kernel tarball/base version -%define kversion 5.%{base_sublevel} - - # turn off debug kernel and kabichk for gcov builds %if %{with_gcov} %define with_debug 0 @@ -324,10 +264,7 @@ Summary: The Linux kernel # if requested, only build debug kernel %if %{with_dbgonly} -%if %{debugbuildsenabled} %define with_up 0 -%endif -%define with_pae 0 %define with_tools 0 %define with_perf 0 %define with_bpftool 0 @@ -466,18 +403,21 @@ Summary: The Linux kernel %if 0%{?fedora} %define nobuildarches i386 %else -%define nobuildarches i386 i686 +%define nobuildarches i386 i686 %{arm} %endif %ifarch %nobuildarches +# disable BuildKernel commands %define with_up 0 %define with_debug 0 +%define with_pae 0 +%define with_zfcpdump 0 + %define with_debuginfo 0 %define with_perf 0 %define with_tools 0 %define with_bpftool 0 %define with_selftests 0 -%define with_pae 0 %define _enable_debug_packages 0 %endif @@ -537,7 +477,6 @@ BuildRequires: net-tools, hostname, bc, elfutils-devel %if 0%{?fedora} BuildRequires: dwarves %endif -# Used to mangle unversioned shebangs to be Python 3 BuildRequires: python3-devel %if %{with_headers} BuildRequires: rsync @@ -623,7 +562,14 @@ BuildRequires: xmlto BuildRequires: asciidoc %endif -Source0: https://www.kernel.org/pub/linux/kernel/v5.x/linux-%{kversion}.tar.xz +# Because this is the kernel, it's hard to get a single upstream URL +# to represent the base without needing to do a bunch of patching. This +# tarball is generated from a src-git tree. If you want to see the +# exact git commit you can run +# +# xzcat -qq ${TARBALL} | git get-tar-commit-id +Source0: linux-20200414git8632e9b5645b.tar.xz + # Name of the packaged file containing signing key %ifarch ppc64le @@ -671,9 +617,8 @@ Source13: redhatsecureboot003.cer Source22: mod-extra.list.rhel Source16: mod-extra.list.fedora -Source17: mod-extra.sh +Source17: mod-blacklist.sh Source18: mod-sign.sh -Source19: mod-extra-blacklist.sh Source79: parallel_xz.sh Source80: filter-x86_64.sh.fedora @@ -727,7 +672,6 @@ Source53: generate_bls_conf.sh Source56: update_scripts.sh Source54: mod-internal.list -Source55: merge.pl Source200: check-kabi @@ -741,132 +685,28 @@ Source211: Module.kabi_dup_ppc64le Source212: Module.kabi_dup_s390x Source213: Module.kabi_dup_x86_64 -# Source300: kernel-abi-whitelists-%{rpmversion}-%{distro_build}.tar.bz2 -# Source301: kernel-kabi-dw-%{rpmversion}-%{distro_build}.tar.bz2 +Source300: kernel-abi-whitelists-%{rpmversion}-%{distro_build}.tar.bz2 +Source301: kernel-kabi-dw-%{rpmversion}-%{distro_build}.tar.bz2 # Sources for kernel-tools Source2000: cpupower.service Source2001: cpupower.config -## Patches needed for building this package - -# Patch1: patch-%{rpmversion}-redhat.patch - -# empty final patch to facilitate testing of kernel patches -# Patch999999: linux-kernel-test.patch - -# This file is intentionally left empty in the stock kernel. Its a nicety -# added for those wanting to do custom rebuilds with altered config opts. -Source1000: kernel-local - -# Here should be only the patches up to the upstream canonical Linus tree. - -# For a stable release kernel -%if 0%{?stable_update} -%if 0%{?stable_base} -%define stable_patch_00 patch-5.%{base_sublevel}.%{stable_base}.xz -Source5000: %{stable_patch_00} -%endif - -# non-released_kernel case -# These are automagically defined by the rcrev and gitrev values set up -# near the top of this spec file. -%else -%if 0%{?rcrev} -Source5000: patch-5.%{upstream_sublevel}-rc%{rcrev}.xz -%if 0%{?gitrev} -Source5001: patch-5.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.xz -%endif -%else -# pre-{base_sublevel+1}-rc1 case -%if 0%{?gitrev} -Source5000: patch-5.%{base_sublevel}-git%{gitrev}.xz -%endif -%endif -%endif +# Some people enjoy building customized kernels from the dist-git in Fedora and +# use this to override configuration options. One day they may all use the +# source tree, but in the mean time we carry this to support the legacy workflow +Source3000: merge.pl +Source3001: kernel-local ## Patches needed for building this package -## compile fixes - -%if !%{nopatches} - -# Git trees. - -# Standalone patches -# 100 - Generic long running patches - -# 200 - x86 / secureboot - -# bz 1497559 - Make kernel MODSIGN code not error on missing variables -Patch201: 0002-Add-efi_status_to_str-and-rework-efi_status_to_err.patch -Patch202: 0003-Make-get_cert_list-use-efi_status_to_str-to-print-er.patch - -Patch204: efi-secureboot.patch - -Patch206: s390-Lock-down-the-kernel-when-the-IPL-secure-flag-i.patch - -# 300 - ARM patches -Patch300: arm64-Add-option-of-13-for-FORCE_MAX_ZONEORDER.patch - -# RHBZ Bug 1576593 - work around while vendor investigates -Patch301: arm-make-highpte-not-expert.patch +Patch1: patch-%{rpmversion}-redhat.patch -# https://patchwork.kernel.org/patch/10351797/ -Patch302: ACPI-scan-Fix-regression-related-to-X-Gene-UARTs.patch -# rhbz 1574718 -Patch303: ACPI-irq-Workaround-firmware-issue-on-X-Gene-based-m400.patch - -Patch304: ARM-tegra-usb-no-reset.patch - -# Raspberry Pi -# v5 https://patchwork.kernel.org/cover/11429245/ -Patch310: USB-pci-quirks-Add-Raspberry-Pi-4-quirk.patch - -# Tegra bits -# http://patchwork.ozlabs.org/patch/1243112/ -Patch320: backlight-lp855x-Ensure-regulators-are-disabled-on-probe-failure.patch -# https://patchwork.ozlabs.org/patch/1261638/ -Patch321: arm64-drm-tegra-Fix-SMMU-support-on-Tegra124-and-Tegra210.patch - -# Pine64 bits -# https://patchwork.kernel.org/cover/11440399/ -Patch330: Add-support-for-PinePhone-LCD-panel.patch - -# 400 - IBM (ppc/s390x) patches - -# 500 - Temp fixes/CVEs etc -# rhbz 1431375 -Patch501: input-rmi4-remove-the-need-for-artifical-IRQ.patch - -# gcc9 fixes -Patch502: 0001-Drop-that-for-now.patch - -# https://bugzilla.redhat.com/show_bug.cgi?id=1701096 -# Submitted upstream at https://lkml.org/lkml/2019/4/23/89 -Patch503: KEYS-Make-use-of-platform-keyring-for-module-signature.patch - -# Fixes a boot hang on debug kernels -# https://bugzilla.redhat.com/show_bug.cgi?id=1756655 -Patch504: 0001-mm-kmemleak-skip-late_init-if-not-skip-disable.patch - -# it seems CONFIG_OPTIMIZE_INLINING has been forced now and is causing issues on ARMv7 -# https://lore.kernel.org/patchwork/patch/1132459/ -# https://lkml.org/lkml/2019/8/29/1772 -Patch505: ARM-fix-__get_user_check-in-case-uaccess_-calls-are-not-inlined.patch - -# https://bugzilla.redhat.com/show_bug.cgi?id=1816621 -# https://patchwork.ozlabs.org/patch/1260523/ -Patch510: e1000e-bump-up-timeout-to-wait-when-ME-un-configure-ULP-mode.patch - -# Fixes build on s390 and should be upstream after rc1 -Patch512: export_sysrq_mask.patch +# empty final patch to facilitate testing of kernel patches +Patch999999: linux-kernel-test.patch # END OF PATCH DEFINITIONS -%endif - - %description The kernel meta package @@ -1034,7 +874,7 @@ This package provides debug information for package kernel-tools. # symlinks because of the trailing nonmatching alternation and # the leading .*, because of find-debuginfo.sh's buggy handling # of matching the pattern against the symlinks file. -%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|XXX' -o kernel-tools-debuginfo.list} +%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|XXX' -o kernel-tools-debuginfo.list} # with_tools %endif @@ -1125,8 +965,6 @@ AutoReqProv: no\ This package provides debug information for package %{name}%{?1:-%{1}}.\ This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\ %{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\ - - %{nil} # @@ -1245,9 +1083,6 @@ The meta-package for the %{1} kernel\ Summary: %{variant_summary}\ Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Provides: installonlypkg(kernel)\ -%ifarch ppc64le\ -Obsoletes: kernel-bootwrapper\ -%endif\ %{expand:%%kernel_reqprovconf}\ %if %{?1:1} %{!?1:0} \ %{expand:%%kernel_meta_package %{?1:%{1}}}\ @@ -1307,17 +1142,12 @@ input and output, etc. %prep # do a few sanity-checks for --with *only builds %if %{with_baseonly} -%if !%{with_up}%{with_pae} +%if !%{with_up} echo "Cannot build --with baseonly, up build is disabled" exit 1 %endif %endif -%if "%{baserelease}" == "0" -echo "baserelease must be greater than zero" -exit 1 -%endif - # more sanity checking; do it quietly if [ "%{patches}" != "%%{patches}" ] ; then for patch in %{patches} ; do @@ -1364,166 +1194,13 @@ ApplyOptionalPatch() fi } -# First we unpack the kernel tarball. -# If this isn't the first make prep, we use links to the existing clean tarball -# which speeds things up quite a bit. - -# Update to latest upstream. -%if 0%{?released_kernel} -%define vanillaversion 5.%{base_sublevel} -# non-released_kernel case -%else -%if 0%{?rcrev} -%define vanillaversion 5.%{upstream_sublevel}-rc%{rcrev} -%if 0%{?gitrev} -%define vanillaversion 5.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev} -%endif -%else -# pre-{base_sublevel+1}-rc1 case -%if 0%{?gitrev} -%define vanillaversion 5.%{base_sublevel}-git%{gitrev} -%else -%define vanillaversion 5.%{base_sublevel} -%endif -%endif -%endif - -# %%{vanillaversion} : the full version name, e.g. 2.6.35-rc6-git3 -# %%{kversion} : the base version, e.g. 2.6.34 - -# Use kernel-%%{kversion}%%{?dist} as the top-level directory name -# so we can prep different trees within a single git directory. - -# Build a list of the other top-level kernel tree directories. -# This will be used to hardlink identical vanilla subdirs. -sharedirs=$(find "$PWD" -maxdepth 1 -type d -name 'kernel-5.*' \ - | grep -x -v "$PWD"/kernel-%{kversion}%{?dist}) ||: - -# Delete all old stale trees. -if [ -d kernel-%{kversion}%{?dist} ]; then - cd kernel-%{kversion}%{?dist} - for i in linux-* - do - if [ -d $i ]; then - # Just in case we ctrl-c'd a prep already - rm -rf deleteme.%{_target_cpu} - # Move away the stale away, and delete in background. - mv $i deleteme-$i - rm -rf deleteme* & - fi - done - cd .. -fi - -# Generate new tree -if [ ! -d kernel-%{kversion}%{?dist}/vanilla-%{vanillaversion} ]; then - - if [ -d kernel-%{kversion}%{?dist}/vanilla-%{kversion} ]; then - - # The base vanilla version already exists. - cd kernel-%{kversion}%{?dist} - - # Any vanilla-* directories other than the base one are stale. - for dir in vanilla-*; do - [ "$dir" = vanilla-%{kversion} ] || rm -rf $dir & - done - - else - - rm -f pax_global_header - # Look for an identical base vanilla dir that can be hardlinked. - for sharedir in $sharedirs ; do - if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then - break - fi - done - if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then -%setup -q -n kernel-%{kversion}%{?dist} -c -T - cp -al $sharedir/vanilla-%{kversion} . - else -%setup -q -n kernel-%{kversion}%{?dist} -c - mv linux-%{kversion} vanilla-%{kversion} - fi - - fi - -%if "%{kversion}" != "%{vanillaversion}" - - for sharedir in $sharedirs ; do - if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then - break - fi - done - if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then - - cp -al $sharedir/vanilla-%{vanillaversion} . - - else - - # Need to apply patches to the base vanilla version. - cp -al vanilla-%{kversion} vanilla-%{vanillaversion} - cd vanilla-%{vanillaversion} - -cp %{SOURCE12} . - -# Update vanilla to the latest upstream. -# (non-released_kernel case only) -%if 0%{?rcrev} - xzcat %{SOURCE5000} | patch -p1 -F1 -s -%if 0%{?gitrev} - xzcat %{SOURCE5001} | patch -p1 -F1 -s -%endif -%else -# pre-{base_sublevel+1}-rc1 case -%if 0%{?gitrev} - xzcat %{SOURCE5000} | patch -p1 -F1 -s -%endif -%endif - git init - git config user.email "kernel-team@fedoraproject.org" - git config user.name "Fedora Kernel Team" - git config gc.auto 0 - git add . - git commit -a -q -m "baseline" - - cd .. - - fi - -%endif - -else - - # We already have all vanilla dirs, just change to the top-level directory. - cd kernel-%{kversion}%{?dist} - -fi - -# Now build the fedora kernel tree. -cp -al vanilla-%{vanillaversion} linux-%{KVERREL} +%setup -q -n kernel-20200414git8632e9b5645b -c +mv linux-20200414git8632e9b5645b linux-%{KVERREL} cd linux-%{KVERREL} -if [ ! -d .git ]; then - git init - git config user.email "kernel-team@fedoraproject.org" - git config user.name "Fedora Kernel Team" - git config gc.auto 0 - git add . - git commit -a -q -m "baseline" -fi - -# released_kernel with possible stable updates -%if 0%{?stable_base} -# This is special because the kernel spec is hell and nothing is consistent -xzcat %{SOURCE5000} | patch -p1 -F1 -s -git commit -a -m "Stable update" -%endif - -# Note: Even in the "nopatches" path some patches (build tweaks and compile -# fixes) will always get applied; see patch defition above for details - -git am %{patches} +ApplyOptionalPatch patch-%{rpmversion}-redhat.patch +ApplyOptionalPatch linux-kernel-test.patch # END OF PATCH APPLICATIONS @@ -1552,6 +1229,7 @@ pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \ tools/perf/tests/attr.py \ tools/perf/scripts/python/stat-cpi.py \ tools/perf/scripts/python/sched-migration.py \ + tools/testing/selftests/drivers/net/mlxsw/sharedbuffer_configuration.py \ Documentation \ scripts/gen_compile_commands.py @@ -1561,32 +1239,28 @@ pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \ if [ -L configs ]; then rm -f configs fi -# Deal with configs stuff mkdir configs cd configs # Drop some necessary files from the source dir into the buildroot cp $RPM_SOURCE_DIR/kernel-*.config . -cp %{SOURCE1000} . -cp %{SOURCE55} . cp %{SOURCE51} . +# merge.pl +cp %{SOURCE3000} . +# kernel-local +cp %{SOURCE3001} . VERSION=%{version} ./generate_all_configs.sh %{primary_target} %{debugbuildsenabled} - # Merge in any user-provided local config option changes %ifnarch %nobuildarches for i in %{all_arch_configs} do mv $i $i.tmp - ./merge.pl %{SOURCE1000} $i.tmp > $i + ./merge.pl %{SOURCE3001} $i.tmp > $i rm $i.tmp done %endif -%if !%{debugbuildsenabled} -rm -f kernel-%{version}-*debug.config -%endif - # enable GCOV kernel config options if gcov is on %if %{with_gcov} for i in *.config @@ -1633,19 +1307,6 @@ cp_vmlinux() eu-strip --remove-comment -o "$2" "$1" } -# These are for host programs that get built as part of the kernel and -# are required to be packaged in kernel-devel for building external modules. -# Since they are userspace binaries, they are required to pickup the hardening -# flags defined in the macros. The --build-id=uuid is a trick to get around -# debuginfo limitations: Typically, find-debuginfo.sh will update the build -# id of all binaries to allow for parllel debuginfo installs. The kernel -# can't use this because it breaks debuginfo for the vDSO so we have to -# use a special mechanism for kernel and modules to be unique. Unfortunately, -# we still have userspace binaries which need unique debuginfo and because -# they come from the kernel package, we can't just use find-debuginfo.sh to -# rewrite only those binaries. The easiest option right now is just to have -# the build id be a uuid for the host programs. -# # Note we need to disable these flags for cross builds because the flags # from redhat-rpm-config assume that host == target so target arch # flags cause issues with the host compiler. @@ -1684,20 +1345,10 @@ BuildKernel() { KernelVer=%{version}-%{release}.%{_target_cpu}${Flav} echo BUILDING A KERNEL FOR ${Flavour} %{_target_cpu}... - %if 0%{?stable_update} - # make sure SUBLEVEL is incremented on a stable release. Sigh 3.x. - perl -p -i -e "s/^SUBLEVEL.*/SUBLEVEL = %{?stablerev}/" Makefile - %endif - # make sure EXTRAVERSION says what we want it to say - perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -%{release}.%{_target_cpu}${Flav}/" Makefile - - # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme - %if !0%{?rcrev} - %if 0%{?gitrev} - perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{upstream_sublevel}/' Makefile - %endif - %endif + # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters + ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r") + perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Flav}/" Makefile # and now to start the build process @@ -1849,12 +1500,8 @@ BuildKernel() { mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source) # dirs for additional modules per module-init-tools, kbuild/modules.txt - mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/extra - mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/internal mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates -%if 0%{!?fedora:1} mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates -%endif # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of # testing so just delete find . -name *.h.s -delete @@ -2069,12 +1716,10 @@ BuildKernel() { rm -f modules.{alias*,builtin.bin,dep*,*map,symbols*,devname,softdep} popd - # Call the modules-extra script to move things around - %{SOURCE17} $RPM_BUILD_ROOT/lib/modules/$KernelVer $RPM_SOURCE_DIR/mod-extra.list - # Blacklist net autoloadable modules in modules-extra - %{SOURCE19} $RPM_BUILD_ROOT lib/modules/$KernelVer - # Call the modules-extra script for internal modules - %{SOURCE17} $RPM_BUILD_ROOT/lib/modules/$KernelVer %{SOURCE54} internal + # Identify modules in the kernel-modules-extras package + %{SOURCE17} $RPM_BUILD_ROOT lib/modules/$KernelVer $RPM_SOURCE_DIR/mod-extra.list + # Identify modules in the kernel-modules-extras package + %{SOURCE17} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE54} internal # # Generate the kernel-core and kernel-modules files lists @@ -2087,8 +1732,10 @@ BuildKernel() { mkdir restore cp -r lib/modules/$KernelVer/* restore/. - # don't include anything going into k-m-e and k-m-i in the file lists - rm -rf lib/modules/$KernelVer/{extra,internal} + # don't include anything going into kernel-modules-extra in the file lists + xargs rm -rf < mod-extra.list + # don't include anything going int kernel-modules-internal in the file lists + xargs rm -rf < mod-internal.list if [ $DoModules -eq 1 ]; then # Find all the module files and filter them out into the core and @@ -2139,11 +1786,15 @@ BuildKernel() { sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Flavour:+-${Flavour}}-modules.list sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Flavour:+-${Flavour}}-core.list sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Flavour:+-${Flavour}}-core.list + sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Flavour:+-${Flavour}}-modules-extra.list + sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Flavour:+-${Flavour}}-modules-internal.list # Cleanup rm -f $RPM_BUILD_ROOT/k-d.list rm -f $RPM_BUILD_ROOT/modules.list rm -f $RPM_BUILD_ROOT/module-dirs.list + rm -f $RPM_BUILD_ROOT/mod-extra.list + rm -f $RPM_BUILD_ROOT/mod-internal.list %if %{signmodules} if [ $DoModules -eq 1 ]; then @@ -2264,10 +1915,12 @@ pushd tools/thermal/tmon/ %{tools_make} popd pushd tools/iio/ -%{make} +# Needs to be fixed to pick up CFLAGS +make popd pushd tools/gpio/ -%{make} +# Needs to be fixed to pick up CFLAGS +make popd %endif @@ -2346,7 +1999,7 @@ find Documentation -type d | xargs chmod u+w # We don't want to package debuginfo for self-tests and samples but # we have to delete them to avoid an error messages about unpackaged # files. -# Delete the debuginfo for for kernel-devel files +# Delete the debuginfo for kernel-devel files %define __remove_unwanted_dbginfo_install_post \ if [ "%{with_selftests}" -ne "0" ]; then \ rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \ @@ -2653,12 +2306,10 @@ fi\ # %define kernel_variant_posttrans() \ %{expand:%%posttrans %{?1:%{1}-}core}\ -%if 0%{!?fedora:1}\ if [ -x %{_sbindir}/weak-modules ]\ then\ %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\ fi\ -%endif\ /bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\ %{nil} @@ -2688,12 +2339,10 @@ fi}\ %define kernel_variant_preun() \ %{expand:%%preun %{?1:%{1}-}core}\ /bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\ -%if 0%{!?fedora:1}\ if [ -x %{_sbindir}/weak-modules ]\ then\ %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\ fi\ -%endif\ %{nil} %kernel_variant_preun @@ -2840,6 +2489,7 @@ fi %{_mandir}/man8/bpftool-net.8.gz %{_mandir}/man8/bpftool-feature.8.gz %{_mandir}/man8/bpftool-btf.8.gz +%{_mandir}/man8/bpftool-struct_ops.8.gz %if %{with_debuginfo} %files -f bpftool-debuginfo.list -n bpftool-debuginfo @@ -2901,9 +2551,7 @@ fi /lib/modules/%{KVERREL}%{?3:+%{3}}/source\ /lib/modules/%{KVERREL}%{?3:+%{3}}/updates\ /lib/modules/%{KVERREL}%{?3:+%{3}}/bls.conf\ -%if 0%{!?fedora:1}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\ -%endif\ %{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}/kernel-signing-ca.cer\ %ifarch s390x ppc64le\ %if 0%{!?4:1}\ @@ -2918,11 +2566,9 @@ fi %{expand:%%files %{?3:%{3}-}devel}\ %defverify(not mtime)\ /usr/src/kernels/%{KVERREL}%{?3:+%{3}}\ -%{expand:%%files %{?3:%{3}-}modules-extra}\ +%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\ %config(noreplace) /etc/modprobe.d/*-blacklist.conf\ -/lib/modules/%{KVERREL}%{?3:+%{3}}/extra\ -%{expand:%%files %{?3:%{3}-}modules-internal}\ -/lib/modules/%{KVERREL}%{?3:+%{3}}/internal\ +%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\ %if %{with_debuginfo}\ %ifnarch noarch\ %{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\ @@ -2957,524 +2603,463 @@ fi # # %changelog -* Mon Apr 13 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.7.0-0.rc1.git0.1 -- Linux v5.7-rc1 - -* Mon Apr 13 2020 Justin M. Forbes <jforbes@fedoraproject.org> -- Disable debugging options. - -* Wed Apr 08 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.7.0-0.rc0.git8.1 -- Linux v5.6-12046-gae46d2aa6a7f - -* Tue Apr 07 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.7.0-0.rc0.git7.1 -- Linux v5.6-11448-g7e63420847ae - -* Tue Apr 07 2020 Karol Herbst <kherbst@redhat.com> -- Add patches to fix nouveau issues preventing booting the installer or system - -* Mon Apr 06 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.7.0-0.rc0.git6.1 -- Linux v5.6-11374-ga10c9c710f9e - -* Fri Apr 03 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.7.0-0.rc0.git5.1 -- Linux v5.6-9431-gbef7b2a7be28 - -* Thu Apr 02 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.7.0-0.rc0.git4.1 -- Linux v5.6-7632-g919dce24701f +* Tue Apr 14 2020 Jeremy Cline <jcline@redhat.com> [5.7.0-0.rc1.20200414git8632e9b5645b.1] +- 8632e9b5645b rebase +- Drop DIST from release commits and tags (Jeremy Cline) +- Sync up with Fedora arm configuration prior to merging (Jeremy Cline) +- Disable CONFIG_PROTECTED_VIRTUALIZATION_GUEST for zfcpdump (Jeremy Cline) + +* Tue Apr 14 2020 Jeremy Cline <jcline@redhat.com> [5.7.0-0.rc1.3.fc33] +- Include bpftool-struct_ops man page in the bpftool package (Jeremy Cline) + +* Mon Apr 13 2020 Jeremy Cline <jcline@redhat.com> [5.7.0-0.rc1.2.fc33] +- Add sharedbuffer_configuration.py to the pathfix.py script (Jeremy Cline) + +* Mon Apr 13 2020 Jeremy Cline <jcline@redhat.com> [5.7.0-0.rc1.1.fc33] +- v5.7-rc1 rebase +- tty/sysrq: Export sysrq_mask() (Dmitry Safonov) +- e1000e: bump up timeout to wait when ME un-configure ULP mode (Aaron Ma) +- Drop RH_FEDORA in favor of the now-merged RHEL_DIFFERENCES (Jeremy Cline) +- Sync up Fedora configs from the first week of the merge window (Jeremy Cline) +- Add a script to test if all commits are signed off (Jeremy Cline) +- Fix a painfully obvious YAML syntax error in .gitlab-ci.yml (Jeremy Cline) +- Migrate blacklisting floppy.ko to mod-blacklist.sh (Don Zickus) +- kernel packaging: Combine mod-blacklist.sh and mod-extra-blacklist.sh (Don Zickus) +- kernel packaging: Fix extra namespace collision (Don Zickus) +- mod-extra.sh: Rename to mod-blacklist.sh (Don Zickus) +- mod-extra.sh: Make file generic (Don Zickus) +- Fix make rh-configs-arch (Don Zickus) +- Add in armv7hl kernel header support (Don Zickus) +- Disable all BuildKernel commands when only building headers (Don Zickus) +- Add RHMAINTAINERS file and supporting conf (Don Zickus) + +* Mon Mar 30 2020 Jeremy Cline <jcline@redhat.com> [5.6.0-0.rc7.1.elrdy] +- v5.6-rc7 rebase +- Drop any gitlab-ci patches from ark-patches (Jeremy Cline) +- Build the srpm for internal branch CI using the vanilla tree (Jeremy Cline) +- arm64: allwinner: dts: a64: add LCD-related device nodes for PinePhone (Icenowy Zheng) +- drm/sun4i: sun6i_mipi_dsi: fix horizontal timing calculation (Icenowy Zheng) +- drm: panel: add Xingbangda XBD599 panel (Icenowy Zheng) +- dt-bindings: panel: add binding for Xingbangda XBD599 panel (Icenowy Zheng) +- Pull in the latest ARM configurations for Fedora (Jeremy Cline) +- USB: pci-quirks: Add Raspberry Pi 4 quirk (Nicolas Saenz Julienne) +- PCI: brcmstb: Wait for Raspberry Pi's firmware when present (Nicolas Saenz Julienne) +- firmware: raspberrypi: Introduce vl805 init routine (Nicolas Saenz Julienne) +- soc: bcm2835: Sync xHCI reset firmware property with downstream (Nicolas Saenz Julienne) +- drm/i915: Force DPCD backlight mode for some Dell CML 2020 panels (Lyude Paul) +- drm/i915: Force DPCD backlight mode on X1 Extreme 2nd Gen 4K AMOLED panel (Lyude Paul) +- drm/dp: Introduce EDID-based quirks (Lyude Paul) +- drm/i915: Auto detect DPCD backlight support by default (Lyude Paul) +- drm/i915: Fix DPCD register order in intel_dp_aux_enable_backlight() (Lyude Paul) +- drm/i915: Assume 100 brightness when not in DPCD control mode (Lyude Paul) +- drm/i915: Fix eDP DPCD aux max backlight calculations (Lyude Paul) +- drm/dp_mst: Fix drm_dp_check_mstb_guid() return code (Lyude Paul) +- drm/dp_mst: Make drm_dp_mst_dpcd_write() consistent with drm_dp_dpcd_write() (Lyude Paul) +- drm/dp_mst: Fix W=1 warnings (Benjamin Gaignard) +- ARM: fix __get_user_check() in case uaccess_* calls are not inlined (Masahiro Yamada) +- mm/kmemleak: skip late_init if not skip disable (Murphy Zhou) +- KEYS: Make use of platform keyring for module signature verify (Robert Holmes) +- Drop that for now (Laura Abbott) +- Input: rmi4 - remove the need for artificial IRQ in case of HID (Benjamin Tissoires) +- arm64: dts: rockchip: Add initial support for Pinebook Pro (Tobias Schramm) +- dt-bindings: Add doc for Pine64 Pinebook Pro (Emmanuel Vadot) +- arm64: dts: allwinner: Add initial support for Pine64 PinePhone (Ondrej Jirman) +- dt-bindings: arm: sunxi: Add PinePhone 1.0 and 1.1 bindings (Ondrej Jirman) +- arm64: dts: sun50i-a64: Add i2c2 pins (Ondrej Jirman) +- arm64: dts: allwinner: a64: add support for PineTab (Icenowy Zheng) +- dt-bindings: arm: sunxi: add binding for PineTab tablet (Icenowy Zheng) +- arm64: allwinner: a64: enable LCD-related hardware for Pinebook (Icenowy Zheng) +- drm/panel: simple: Add NewEast Optoelectronics CO., LTD WJFH116008A panel support (Vasily Khoruzhick) +- dt-bindings: display: simple: Add NewEast Optoelectronics WJFH116008A compatible (Vasily Khoruzhick) +- dt-bindings: Add Guangdong Neweast Optoelectronics CO. LTD vendor prefix (Vasily Khoruzhick) +- drm/bridge: anx6345: don't print error message if regulator is not ready (Vasily Khoruzhick) +- drm/bridge: anx6345: Fix getting anx6345 regulators (Samuel Holland) +- arm64: dts: allwinner: a64: Add MBUS controller node (Jernej Skrabec) +- dt-bindings: interconnect: sunxi: Add A64 MBUS compatible (Jernej Skrabec) +- arm64: dts: allwinner: pinebook: Remove unused AXP803 regulators (Samuel Holland) +- arm64: dts: allwinner: pinebook: Fix 5v0 boost regulator (Samuel Holland) +- arm64: dts: allwinner: pinebook: Fix backlight regulator (Samuel Holland) +- arm64: dts: allwinner: pinebook: Add GPIO port regulators (Samuel Holland) +- arm64: dts: allwinner: pinebook: Document MMC0 CD pin name (Samuel Holland) +- arm64: dts: allwinner: pinebook: Make simplefb more consistent (Samuel Holland) +- arm64: dts: allwinner: pinebook: Sort device tree nodes (Samuel Holland) +- arm64: dts: allwinner: pinebook: Remove unused vcc3v3 regulator (Samuel Holland) +- arm64: dts: imx8mq-phanbell: Add support for ethernet (Alifer Moraes) +- backlight: lp855x: Ensure regulators are disabled on probe failure (Jon Hunter) +- regulator: pwm: Don't warn on probe deferral (Jon Hunter) +- ARM64: tegra: Fix Tegra194 PCIe compatible string ("Signed-off-by: Jon Hunter") +- serial: 8250_tegra: Create Tegra specific 8250 driver (Jeff Brasen) +- ARM64: tegra: Populate LP8557 backlight regulator (Jon Hunter) +- ARM64: tegra: Fix Tegra186 SOR supply (Jon Hunter) +- ARM64: tegra: Add EEPROM supplies (Jon Hunter) +- ARM64: Tegra: Enable I2C controller for EEPROM (Jon Hunter) +- ARM: dts: bcm2711: Move emmc2 into its own bus (Nicolas Saenz Julienne) +- irqchip/bcm2835: Quiesce IRQs left enabled by bootloader (Lukas Wunner) +- ARM: dts: bcm2711-rpi-4-b: Add SoC GPIO labels (Stefan Wahren) +- pinctrl: bcm2835: Add support for all GPIOs on BCM2711 (Stefan Wahren) +- pinctrl: bcm2835: Refactor platform data (Stefan Wahren) +- pinctrl: bcm2835: Drop unused define (Stefan Wahren) +- ARM: tegra: usb no reset (Peter Robinson) +- arm: make CONFIG_HIGHPTE optional without CONFIG_EXPERT (Jon Masters) +- Revert "Add a SysRq option to lift kernel lockdown" (Jeremy Cline) +- Fix xz memory usage issue (Neil Horman) +- Use ark-latest instead of master for update script (Jeremy Cline) +- Move the CI jobs back into the ARK repository (Jeremy Cline) +- Revert "[redhat] Apply a second patch set in Fedora build roots" (Jeremy Cline) +- Sync up ARK's Fedora config with the dist-git repository (Jeremy Cline) + +* Mon Mar 09 2020 Jeremy Cline <jcline@redhat.com> [5.6.0-0.rc5.1.elrdy] +- v5.6-rc5 rebase +- Pull in the latest configuration changes from Fedora (Jeremy Cline) +- configs: enable CONFIG_NET_SCH_CBS (Marcelo Ricardo Leitner) + +* Fri Mar 06 2020 Jeremy Cline <jcline@redhat.com> [5.6.0-0.rc4.2.elrdy] +- Disable CONFIG_DRM_DP_CEC temporarily (Jeremy Cline) + +* Fri Mar 06 2020 Jeremy Cline <jcline@redhat.com> [5.6.0-0.rc4.1.elrdy] +- v5.6-rc4 rebase +- redhat: rh_kabi: deduplication friendly structs (Jiri Benc) +- redhat: rh_kabi add a comment with warning about RH_KABI_EXCLUDE usage (Jiri Benc) +- redhat: rh_kabi: introduce RH_KABI_EXTEND_WITH_SIZE (Jiri Benc) +- redhat: rh_kabi: Indirect EXTEND macros so nesting of other macros will resolve. (Don Dutile) +- redhat: rh_kabi: Fix RH_KABI_SET_SIZE to use dereference operator (Tony Camuso) +- redhat: rh_kabi: Add macros to size and extend structs (Prarit Bhargava) +- mptsas: pci-id table changes (Laura Abbott) +- mptsas: Taint kernel if mptsas is loaded (Laura Abbott) +- mptspi: pci-id table changes (Laura Abbott) +- mptspi: Taint kernel if mptspi is loaded (Laura Abbott) +- kernel: add SUPPORT_REMOVED kernel taint (Tomas Henzl) [1602033] +- Rename RH_DISABLE_DEPRECATED to RHEL_DIFFERENCES (Don Zickus) +- Revert "Drop references to SCSI PCI IDs we remove" (Don Zickus) +- Revert "mpt*: remove certain deprecated pci-ids" (Don Zickus) +- Revert "megaraid_sas: remove deprecated pci-ids" (Don Zickus) +- Revert "aacraid: Remove depreciated device and vendor PCI id's" (Don Zickus) +- Revert "qla4xxx: Remove deprecated PCI IDs from RHEL 8" (Don Zickus) +- Revert "hpsa: remove old cciss-based smartarray pci ids" (Don Zickus) +- Revert "hpsa: modify hpsa driver version" (Don Zickus) +- Revert "Removing Obsolete hba pci-ids from rhel8" (Don Zickus) +- Revert "be2iscsi: remove unsupported device IDs" (Don Zickus) +- Revert "be2iscsi: remove BE3 family support" (Don Zickus) +- Revert "qla2xxx: Remove PCI IDs of deprecated adapter" (Don Zickus) +- Drop configuration options in fedora/ that no longer exist (Jeremy Cline) +- Set RH_FEDORA for ARK and Fedora (Jeremy Cline) +- Add option of 13 for FORCE_MAX_ZONEORDER (Peter Robinson) +- Introduce RH_FEDORA config for Fedora-specific patches (Jeremy Cline) +- redhat/kernel.spec: Include the release in the kernel COPYING file (Jeremy Cline) + +* Mon Feb 17 2020 Jeremy Cline <jcline@redhat.com> [5.6.0-0.rc2.2.elrdy] +- Disable CONFIG_DRM_DP_CEC temporarily (Jeremy Cline) +- Drop references to SCSI PCI IDs we remove (Jeremy Cline) + +* Mon Feb 17 2020 Jeremy Cline <jcline@redhat.com> [5.6.0-0.rc2.1.elrdy] +- v5.6-rc2 rebase +- redhat/kernel.spec: add scripts/jobserver-exec to py3_shbang_opts list (Jeremy Cline) +- redhat/kernel.spec: package bpftool-gen man page (Jeremy Cline) + +* Thu Feb 13 2020 Jeremy Cline <jcline@redhat.com> [5.6.0-0.rc1.4.elrdy] +- Package bpftool-gen man page (Jeremy Cline) + +* Thu Feb 13 2020 Jeremy Cline <jcline@redhat.com> [5.6.0-0.rc1.3.elrdy] +- Used Python 3 for scripts/jobserver-exec (Jeremy Cline) + +* Wed Feb 12 2020 Jeremy Cline <jcline@redhat.com> [5.6.0-0.rc1.2.elrdy] +- Disable CONFIG_DRM_DP_CEC temporarily (Jeremy Cline) + +* Wed Feb 12 2020 Jeremy Cline <jcline@redhat.com> [5.6.0-0.rc1.1.elrdy] +- v5.6-rc1 rebase +- Fix up the EFI secureboot rebase (Jeremy Cline) +- distgit-changelog: handle multiple y-stream BZ numbers (Bruno Meneguele) +- redhat/kernel.spec: remove all inline comments (Bruno Meneguele) +- redhat/genspec: awk unknown whitespace regex pattern (Bruno Meneguele) +- Improve the readability of gen_config_patches.sh (Jeremy Cline) +- Fix some awkward edge cases in gen_config_patches.sh (Jeremy Cline) +- Updated changelog (Jeremy Cline) +- Update the CI environment to use Fedora 31 (Jeremy Cline) + +* Tue Jan 28 2020 Jeremy Cline <jcline@redhat.com> [5.5.0-1.elrdy] +- v5.5 rebase +- Revert "Turn off CONFIG_AX25" (Laura Abbott) + +* Thu Jan 23 2020 Jeremy Cline <jcline@redhat.com> [5.5.0-0.rc7.1.elrdy] +- v5.5-rc7 rebase + +* Wed Jan 15 2020 Jeremy Cline <jcline@redhat.com> [5.5.0-0.rc6.1.elrdy] +- v5.5-rc6 rebase +- s390: Lock down the kernel when the IPL secure flag is set (Jeremy Cline) +- configs: Enable CONFIG_KEY_DH_OPERATIONS on ARK (Ondrej Mosnacek) +- redhat: drop whitespace from with_gcov macro (Jan Stancek) [INTERNAL] + +* Mon Jan 06 2020 Jeremy Cline <jcline@redhat.com> [5.5.0-0.rc5.1.elrdy] +- v5.5-rc5 rebase + +* Mon Jan 06 2020 Jeremy Cline <jcline@redhat.com> [5.5.0-0.rc4.1.elrdy] +- v5.5-rc4 rebase + +* Fri Jan 03 2020 Jeremy Cline <jcline@redhat.com> [5.5.0-0.rc3.1.elrdy] +- v5.5-rc3 rebase +- Turn on BLAKE2B for Fedora (Jeremy Cline) +- configs: Adjust CONFIG_MPLS_ROUTING and CONFIG_MPLS_IPTUNNEL (Laura Abbott) +- New configs in lib/crypto (Jeremy Cline) +- New configs in drivers/char (Jeremy Cline) + +* Fri Jan 03 2020 Jeremy Cline <jcline@redhat.com> [5.5.0-0.rc2.1.elrdy] +- v5.5-rc2 rebase +- Convert pr_warning to pr_warn in secureboot.c (Jeremy Cline) +- Enable CRYPTO_BLAKE2B as its being selected automatically (Jeremy Cline) +- kernel.spec.template: Clean up stray *.h.s files (Laura Abbott) +- Build the SRPM in the CI job (Jeremy Cline) +- Fix up released_kernel case (Laura Abbott) +- Add label so the Gitlab to email bridge ignores the changelog (Jeremy Cline) +- New configs in net/tls (Jeremy Cline) +- New configs in net/tipc (Jeremy Cline) +- New configs in lib/kunit (Jeremy Cline) +- New configs in lib/Kconfig.debug (Jeremy Cline) +- New configs in drivers/ptp (Jeremy Cline) +- New configs in drivers/nvme (Jeremy Cline) +- New configs in drivers/net/phy (Jeremy Cline) +- New configs in drivers/crypto (Jeremy Cline) +- New configs in crypto/Kconfig (Jeremy Cline) +- New configs in arch/arm64 (Jeremy Cline) + +* Fri Dec 13 2019 Jeremy Cline <jcline@redhat.com> [5.5.0-0.rc1.1.elrdy] +- v5.5-rc1 rebase +- Used Python 3 for scripts/jobserver-exec (Jeremy Cline) +- Drop references to SCSI PCI IDs we remove (Jeremy Cline) +- Disable documentation build, it is broken. (Jeremy Cline) +- Temporarily switch TUNE_DEFAULT to y (Jeremy Cline) +- Run config test for merge requests and internal (Jeremy Cline) +- Turn off CONFIG_AX25 (Laura Abbott) +- Add missing licensedir line (Laura Abbott) + +* Tue Nov 26 2019 Jeremy Cline <jcline@redhat.com> [5.4.0-1.elrdy] +- v5.4 rebase +- redhat/scripts: Remove redhat/scripts/rh_get_maintainer.pl (Prarit Bhargava) +- configs: Take CONFIG_DEFAULT_MMAP_MIN_ADDR from Fedra (Laura Abbott) +- configs: Turn off ISDN (Laura Abbott) +- kernel-packaging: Remove kernel files from kernel-modules-extra package (Prarit Bhargava) +- Add a script to generate configuration patches (Laura Abbott) +- Introduce rh-configs-commit (Laura Abbott) + +* Fri Nov 22 2019 Jeremy Cline <jcline@redhat.com> [5.4.0-0.rc8.1.elrdy] +- v5.4-rc8 rebase +- kconfig: Add option to get the full help text with listnewconfig (Laura Abbott) +- configs: Enable CONFIG_DEBUG_WX (Laura Abbott) +- configs: Disable wireless USB (Laura Abbott) +- Clean up some temporary config files (Laura Abbott) +- configs: New config in drivers/gpu for v5.4-rc1 (Jeremy Cline) +- configs: New config in arch/powerpc for v5.4-rc1 (Jeremy Cline) +- configs: New config in crypto for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/usb for v5.4-rc1 (Jeremy Cline) +- AUTOMATIC: New configs (Jeremy Cline) + +* Wed Nov 13 2019 Jeremy Cline <jcline@redhat.com> [5.4.0-0.rc7.1.elrdy] +- v5.4-rc7 rebase +- Temporarily add VBOXSF_FS config (Jeremy Cline) +- Add support for deprecating processors (Laura Abbott) +- Add Red Hat tainting (Laura Abbott) +- Introduce CONFIG_RH_DISABLE_DEPRECATED (Laura Abbott) +- configs: New config in fs/erofs for v5.4-rc1 (Jeremy Cline) +- configs: New config in mm for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/md for v5.4-rc1 (Jeremy Cline) +- configs: New config in init for v5.4-rc1 (Jeremy Cline) + +* Wed Nov 06 2019 Jeremy Cline <jcline@redhat.com> [5.4.0-0.rc6.2.elrdy] +- v5.4-rc6 rebase +- iommu/arm-smmu: workaround DMA mode issues (Laura Abbott) +- rh_taint: correct loaddable module support dependencies (Philipp Rudo) [1652266] +- rh_kabi: introduce RH_KABI_EXCLUDE (Jakub Racek) [1652256] +- mark intel knights landing and knights mill unsupported (David Arcari) [1610493] +- mark whiskey-lake processor supported (David Arcari) [1609604] +- ipmi: do not configure ipmi for HPE m400 (Laura Abbott) [https://bugzilla.redhat.com/show_bug.cgi?id=1670017] +- IB/rxe: Mark Soft-RoCE Transport driver as tech-preview (Don Dutile) [1605216] +- scsi: smartpqi: add inspur advantech ids (Don Brace) [1503736] +- ice: mark driver as tech-preview (Jonathan Toppins) [1495347] +- be2iscsi: remove BE3 family support (Maurizio Lombardi) [1598366] +- update rh_check_supported processor list (David Arcari) [1595918] +- kABI: Add generic kABI macros to use for kABI workarounds (Myron Stowe) [1546831] +- add pci_hw_vendor_status() (Maurizio Lombardi) [1590829] +- ahci: thunderx2: Fix for errata that affects stop engine (Robert Richter) [1563590] +- Vulcan: AHCI PCI bar fix for Broadcom Vulcan early silicon (Robert Richter) [1563590] +- bpf: Add tech preview taint for syscall (Eugene Syromiatnikov) [1559877] +- bpf: set unprivileged_bpf_disabled to 1 by default, add a boot parameter (Eugene Syromiatnikov) [1561171] +- add Red Hat-specific taint flags (Eugene Syromiatnikov) [1559877] +- kdump: fix a grammar issue in a kernel message (Dave Young) [1507353] +- tags.sh: Ignore redhat/rpm (Jeremy Cline) +- put RHEL info into generated headers (Laura Abbott) [https://bugzilla.redhat.com/show_bug.cgi?id=1663728] +- kdump: add support for crashkernel=auto (Jeremy Cline) +- kdump: round up the total memory size to 128M for crashkernel reservation (Dave Young) [1507353] +- acpi: prefer booting with ACPI over DTS (Mark Salter) [1576869] +- aarch64: acpi scan: Fix regression related to X-Gene UARTs (Mark Salter) [1519554] +- ACPI / irq: Workaround firmware issue on X-Gene based m400 (Mark Salter) [1519554] +- add rh_check_supported (David Arcari) [1565717] +- qla2xxx: Remove PCI IDs of deprecated adapter (Jeremy Cline) +- be2iscsi: remove unsupported device IDs (Chris Leech) [1574502] +- Removing Obsolete hba pci-ids from rhel8 (Dick Kennedy) [1572321] +- hpsa: modify hpsa driver version (Jeremy Cline) +- hpsa: remove old cciss-based smartarray pci ids (Joseph Szczypek) [1471185] +- rh_taint: add support for marking driver as unsupported (Jonathan Toppins) [1565704] +- rh_taint: add support (David Arcari) [1565704] +- qla4xxx: Remove deprecated PCI IDs from RHEL 8 (Chad Dupuis) [1518874] +- aacraid: Remove depreciated device and vendor PCI id's (Raghava Aditya Renukunta) [1495307] +- megaraid_sas: remove deprecated pci-ids (Tomas Henzl) [1509329] +- mpt*: remove certain deprecated pci-ids (Jeremy Cline) +- modules: add rhelversion MODULE_INFO tag (Laura Abbott) +- ACPI: APEI: arm64: Ignore broken HPE moonshot APEI support (Al Stone) [1518076] +- configs: New config in fs/fuse for v5.4-rc1 (Jeremy Cline) +- merge.pl: Avoid comments but do not skip them (Don Zickus) +- configs: New config in drivers/net/ethernet/pensando for v5.4-rc1 (Jeremy Cline) +- Update a comment about what released kernel means (Laura Abbott) +- Provide both Fedora and RHEL files in the SRPM (Laura Abbott) +- kernel.spec.template: Trim EXTRAVERSION in the Makefile (Laura Abbott) +- kernel.spec.template: Add macros for building with nopatches (Laura Abbott) +- kernel.spec.template: Add some macros for Fedora differences (Laura Abbott) +- kernel.spec.template: Consolodate the options (Laura Abbott) +- configs: Add pending direcory to Fedora (Laura Abbott) +- kernel.spec.template: Don't run hardlink if rpm-ostree is in use (Laura Abbott) +- configs: New config in net/can for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/net/phy for v5.4-rc1 (Jeremy Cline) +- Updated changelog ("CKI@GitLab") + +* Mon Oct 28 2019 Jeremy Cline <jcline@redhat.com> [5.4.0-0.rc5.1.elrdy] +- v5.4-rc5 rebase +- arm: aarch64: Drop the EXPERT setting from ARM64_FORCE_52BIT (Jeremy Cline) +- configs: turn on ARM64_FORCE_52BIT for debug builds (Jeremy Cline) +- kernel.spec.template: Tweak the python3 mangling (Laura Abbott) +- kernel.spec.template: Add --with verbose option (Laura Abbott) +- kernel.spec.template: Switch to using install instead of __install (Laura Abbott) +- kernel.spec.template: Make the kernel.org URL https (Laura Abbott) +- kernel.spec.template: Update message about secure boot signing (Laura Abbott) +- kernel.spec.template: Move some with flags definitions up (Laura Abbott) +- kernel.spec.template: Update some BuildRequires (Laura Abbott) +- kernel.spec.template: Get rid of clean (Laura Abbott) +- configs: New config in drivers/char for v5.4-rc1 (Jeremy Cline) +- configs: New config in net/sched for v5.4-rc1 (Jeremy Cline) +- configs: New config in lib for v5.4-rc1 (Jeremy Cline) +- configs: New config in fs/verity for v5.4-rc1 (Jeremy Cline) +- configs: New config in arch/aarch64 for v5.4-rc4 (Jeremy Cline) +- configs: New config in arch/arm64 for v5.4-rc1 (Jeremy Cline) +- Flip off CONFIG_ARM64_VA_BITS_52 so the bundle that turns it on applies (Jeremy Cline) +- configs: Increase x86_64 NR_UARTS to 64 (Prarit Bhargava) [http://bugzilla.redhat.com/1730649] +- Update changelog (Laura Abbott) +- New configuration options for v5.4-rc4 (Jeremy Cline) +- Correctly name tarball for single tarball builds (Laura Abbott) +- configs: New config in drivers/pci for v5.4-rc1 (Jeremy Cline) +- Allow overriding the dist tag on the command line (Laura Abbott) +- Allow scratch branch target to be overridden (Laura Abbott) +- Remove long dead BUILD_DEFAULT_TARGET (Laura Abbott) + +* Thu Oct 17 2019 Jeremy Cline <jcline@redhat.com> [5.4.0-0.rc3.1.elrdy] +- v5.4-rc3 rebase +- Amend the changelog when rebasing (Laura Abbott) +- configs: New config in drivers/platform for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/pinctrl for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/net/wireless for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/net/ethernet/mellanox for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/net/can for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/hid for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/dma-buf for v5.4-rc1 (Jeremy Cline) +- configs: New config in block for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/cpuidle for v5.4-rc1 (Jeremy Cline) +- redhat: configs: Split CONFIG_CRYPTO_SHA512 (Laura Abbott) +- redhat: Set Fedora options (Laura Abbott) + +* Wed Oct 09 2019 Jeremy Cline <jcline@redhat.com> [5.4.0-0.rc2.1.elrdy] +- Skip ksamples for bpf, they are broken (Jeremy Cline) +- Add a SysRq option to lift kernel lockdown (Kyle McMartin) +- efi: Lock down the kernel if booted in secure boot mode (David Howells) +- efi: Add an EFI_SECURE_BOOT flag to indicate secure boot mode (David Howells) +- security: lockdown: expose a hook to lock the kernel down (Jeremy Cline) +- Make get_cert_list() use efi_status_to_str() to print error messages. (Peter Jones) +- Add efi_status_to_str() and rework efi_status_to_err(). (Peter Jones) +- Make get_cert_list() not complain about cert lists that aren't present. (Peter Jones) +- [iommu] iommu/arm-smmu: workaround DMA mode issues (Laura Abbott) +- [kernel] rh_taint: correct loaddable module support dependencies (Philipp Rudo) [1652266] +- [kernel] rh_kabi: introduce RH_KABI_EXCLUDE (Jakub Racek) [1652256] +- [x86] mark intel knights landing and knights mill unsupported (David Arcari) [1610493] +- [x86] mark whiskey-lake processor supported (David Arcari) [1609604] +- [char] ipmi: do not configure ipmi for HPE m400 (Laura Abbott) [https://bugzilla.redhat.com/show_bug.cgi?id=1670017] +- [infiniband] IB/rxe: Mark Soft-RoCE Transport driver as tech-preview (Don Dutile) [1605216] +- [scsi] scsi: smartpqi: add inspur advantech ids (Don Brace) [1503736] +- [netdrv] ice: mark driver as tech-preview (Jonathan Toppins) [1495347] +- [scsi] be2iscsi: remove BE3 family support (Maurizio Lombardi) [1598366] +- [x86] update rh_check_supported processor list (David Arcari) [1595918] +- [kernel] kABI: Add generic kABI macros to use for kABI workarounds (Myron Stowe) [1546831] +- [pci] add pci_hw_vendor_status() (Maurizio Lombardi) [1590829] +- [ata] ahci: thunderx2: Fix for errata that affects stop engine (Robert Richter) [1563590] +- [pci] Vulcan: AHCI PCI bar fix for Broadcom Vulcan early silicon (Robert Richter) [1563590] +- [kernel] bpf: Add tech preview taint for syscall (Eugene Syromiatnikov) [1559877] +- [kernel] bpf: set unprivileged_bpf_disabled to 1 by default, add a boot parameter (Eugene Syromiatnikov) [1561171] +- [kernel] add Red Hat-specific taint flags (Eugene Syromiatnikov) [1559877] +- [kernel] kdump: fix a grammar issue in a kernel message (Dave Young) [1507353] +- [scripts] tags.sh: Ignore redhat/rpm (Jeremy Cline) +- [kernel] put RHEL info into generated headers (Laura Abbott) [https://bugzilla.redhat.com/show_bug.cgi?id=1663728] +- [kernel] kdump: add support for crashkernel=auto (Jeremy Cline) +- [kernel] kdump: round up the total memory size to 128M for crashkernel reservation (Dave Young) [1507353] +- [arm64] acpi: prefer booting with ACPI over DTS (Mark Salter) [1576869] +- [acpi] aarch64: acpi scan: Fix regression related to X-Gene UARTs (Mark Salter) [1519554] +- [acpi] ACPI / irq: Workaround firmware issue on X-Gene based m400 (Mark Salter) [1519554] +- [x86] add rh_check_supported (David Arcari) [1565717] +- [scsi] qla2xxx: Remove PCI IDs of deprecated adapter (Jeremy Cline) +- [scsi] be2iscsi: remove unsupported device IDs (Chris Leech) [1574502] +- [scsi] Removing Obsolete hba pci-ids from rhel8 (Dick Kennedy) [1572321] +- [scsi] hpsa: modify hpsa driver version (Jeremy Cline) +- [scsi] hpsa: remove old cciss-based smartarray pci ids (Joseph Szczypek) [1471185] +- [kernel] rh_taint: add support for marking driver as unsupported (Jonathan Toppins) [1565704] +- [kernel] rh_taint: add support (David Arcari) [1565704] +- [scsi] qla4xxx: Remove deprecated PCI IDs from RHEL 8 (Chad Dupuis) [1518874] +- [scsi] aacraid: Remove depreciated device and vendor PCI id's (Raghava Aditya Renukunta) [1495307] +- [scsi] megaraid_sas: remove deprecated pci-ids (Tomas Henzl) [1509329] +- [scsi] mpt*: remove certain deprecated pci-ids (Jeremy Cline) +- [kernel] modules: add rhelversion MODULE_INFO tag (Laura Abbott) +- [acpi] ACPI: APEI: arm64: Ignore broken HPE moonshot APEI support (Al Stone) [1518076] +- gitlab: Add CI job for packaging scripts (Major Hayden) +- Set CRYPTO_SHA3_*_S390 to builtin on zfcpdump (Jeremy Cline) +- configs: New config in drivers/edac for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/firmware for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/hwmon for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/iio for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/mmc for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/tty for v5.4-rc1 (Jeremy Cline) +- configs: New config in arch/s390 for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/bus for v5.4-rc1 (Jeremy Cline) +- Add option to allow mismatched configs on the command line (Laura Abbott) +- configs: New config in drivers/crypto for v5.4-rc1 (Jeremy Cline) +- configs: New config in sound/pci for v5.4-rc1 (Jeremy Cline) +- configs: New config in sound/soc for v5.4-rc1 (Jeremy Cline) +- Speed up CI with CKI image (Major Hayden) +- configs: Fix the pending default for CONFIG_ARM64_VA_BITS_52 (Jeremy Cline) +- configs: Turn on OPTIMIZE_INLINING for everything (Jeremy Cline) +- configs: Set valid pending defaults for CRYPTO_ESSIV (Jeremy Cline) +- Add an initial CI configuration for the internal branch (Jeremy Cline) +- New drop of configuration options for v5.4-rc1 (Jeremy Cline) +- Disable e1000 driver in ARK (Neil Horman) +- New drop of configuration options for v5.4-rc1 (Jeremy Cline) +- configs: Adjust CONFIG_FORCE_MAX_ZONEORDER for Fedora (Laura Abbott) +- configs: Add README for some other arches (Laura Abbott) +- configs: Sync up Fedora configs (Laura Abbott) +- Pull the RHEL version defines out of the Makefile (Jeremy Cline) +- Sync up the ARK build scripts (Jeremy Cline) +- Sync up the Fedora Rawhide configs (Jeremy Cline) +- Sync up the ARK config files (Jeremy Cline) +- [initial commit] Add structure for building with git (Laura Abbott) +- [initial commit] Add Red Hat variables in the top level makefile (Laura Abbott) +- [initial commit] Red Hat gitignore and attributes (Laura Abbott) +- [initial commit] Add changelog (Laura Abbott) +- [initial commit] Add makefile (Laura Abbott) +- [initial commit] Add files for generating the kernel.spec (Laura Abbott) +- [initial commit] Add rpm directory (Laura Abbott) +- [initial commit] Add files for packaging (Laura Abbott) +- [initial commit] Add kabi files (Laura Abbott) +- [initial commit] Add scripts (Laura Abbott) +- [initial commit] Add configs (Laura Abbott) +- [initial commit] Add Makefiles (Laura Abbott) + +# The following bit is important for automation so please do not remove +# END OF CHANGELOG -* Thu Apr 02 2020 Hans de Goede <hdegoede@redhat.com> -- Add patch fixing Lenovo X1 7th and 8th gen not suspending (rhbz 1816621) -- Add patch fixing Lenovo X1 8th gen speaker volume control (rhbz 1820196) - -* Wed Apr 01 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.7.0-0.rc0.git3.1 -- Linux v5.6-5611-g1a323ea5356e - -* Tue Mar 31 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.7.0-0.rc0.git2.1 -- Linux v5.6-2405-gcad18da0afb1 - -* Mon Mar 30 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.7.0-0.rc0.git1.1 -- Linux v5.6-461-g47acac8cae28 -- Reenable debugging options. - -* Mon Mar 30 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-1 -- Linux v5.6 - -* Fri Mar 27 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc7.git1.1 -- Linux v5.6-rc7-227-gf3e69428b5e2 - -* Fri Mar 27 2020 Jeremy Cline <jcline@redhat.com> -- Reenable debugging options. - -* Mon Mar 23 2020 Peter Robinson <pbrobinson@gmail.com> - 5.6.0-0.rc7.git0.1 -- Linux v5.6-rc7 - -* Mon Mar 23 2020 Peter Robinson <pbrobinson@gmail.com> -- Disable debugging options. - -* Fri Mar 20 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc6.git2.1 -- Linux v5.6-rc6-115-g5ad0ec0b8652 -- Switch Secure Boot to lock down to integrity mode (rhbz 1815571) - -* Wed Mar 18 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc6.git1.1 -- Linux v5.6-rc6-9-gac309e7744be - -* Wed Mar 18 2020 Jeremy Cline <jcline@redhat.com> -- Reenable debugging options. - -* Tue Mar 17 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc6.git0.1 -- Linux v5.6-rc6 - -* Tue Mar 17 2020 Jeremy Cline <jcline@redhat.com> -- Disable debugging options. - -* Fri Mar 13 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc5.git2.1 -- Linux v5.6-rc5-204-g0d81a3f29c0a - -* Thu Mar 12 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc5.git1.1 -- Linux v5.6-rc5-53-g3cc6e2c599cd - -* Thu Mar 12 2020 Jeremy Cline <jcline@redhat.com> -- Reenable debugging options. - -* Tue Mar 10 2020 Jeremy Cline <jcline@redhat.com> -- A series of eDP backlight fixes for i915 (rhbz 1811850) - -* Mon Mar 09 2020 Hans de Goede <hdegoede@redhat.com> -- Fix only 1 monitor working on DP-MST docking stations (rhbz 1809681) -- Fix backtraces on various buggy BIOS-es (rhbz 1564895, 1808874) -- Add /etc/modprobe.d/floppy-blacklist.conf to fix auto-loading of the - legacy floppy driver (rhbz 1789155) - -* Mon Mar 09 2020 Peter Robinson <pbrobinson@gmail.com> - 5.6.0-0.rc5.git0.1 -- Linux v5.6-rc5 - -* Mon Mar 09 2020 Peter Robinson <pbrobinson@gmail.com> -- Disable debugging options. - -* Fri Mar 06 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc4.git1.1 -- Linux v5.6-rc4-135-gaeb542a1b5c5 - -* Fri Mar 06 2020 Jeremy Cline <jcline@redhat.com> -- Reenable debugging options. - -* Mon Mar 02 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc4.git0.1 -- Linux v5.6-rc4 - -* Mon Mar 02 2020 Jeremy Cline <jcline@redhat.com> -- Disable debugging options. - -* Fri Feb 28 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc3.git3.1 -- Linux v5.6-rc3-195-gc60c04021353 - -* Thu Feb 27 2020 Peter Robinson <pbrobinson@fedoraproject.org> -- Fixes and enhancements to some AllWinner Pine64 devices -- Some fixes for Tegra devices -- Initial support for the Pinebook Pro - -* Thu Feb 27 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc3.git2.1 -- Linux v5.6-rc3-71-gbfdc6d91a25f - -* Tue Feb 25 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc3.git1.1 -- Linux v5.6-rc3-26-g63623fd44972 - -* Tue Feb 25 2020 Jeremy Cline <jcline@redhat.com> -- Reenable debugging options. - -* Mon Feb 24 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc3.git0.1 -- Linux v5.6-rc3 - -* Mon Feb 24 2020 Jeremy Cline <jcline@redhat.com> -- Disable debugging options. - -* Fri Feb 21 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc2.git3.1 -- Linux v5.6-rc2-55-gca7e1fd1026c - -* Wed Feb 19 2020 Jeremy Cline <jcline@redhat.com> -- Pick up a uapi fix for qemu (rhbz 1804330) - -* Wed Feb 19 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc2.git2.1 -- Linux v5.6-rc2-47-g4b205766d8fc - -* Tue Feb 18 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc2.git1.1 -- Linux v5.6-rc2-8-gb1da3acc781c -- Enable CONFIG_INET_ESPINTCP (rhbz 1804255) - -* Tue Feb 18 2020 Jeremy Cline <jcline@redhat.com> -- Reenable debugging options. - -* Mon Feb 17 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc2.git0.1 -- Linux v5.6-rc2 - -* Mon Feb 17 2020 Jeremy Cline <jcline@redhat.com> -- Disable debugging options. - -* Fri Feb 14 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc1.git3.1 -- Linux v5.6-rc1-44-gb19e8c684703 - -* Thu Feb 13 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc1.git2.1 -- Linux v5.6-rc1-23-g0bf999f9c5e7 - -* Thu Feb 13 2020 Jeremy Cline <jcline@redhat.com> -- Pull in cdrom ioctl fix (rhbz 1801353) - -* Tue Feb 11 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc1.git1.1 -- Linux v5.6-rc1-5-g0a679e13ea30 - -* Tue Feb 11 2020 Jeremy Cline <jcline@redhat.com> -- Reenable debugging options. - -* Mon Feb 10 2020 Jeremy Cline <jcline@redhat.com> -- Remove sysrq support to lift lockdown (rhbz 1800859) - -* Mon Feb 10 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc1.git0.1 -- Linux v5.6-rc1 - -* Mon Feb 10 2020 Jeremy Cline <jcline@redhat.com> -- Disable debugging options. - -* Fri Feb 07 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc0.git5.1 -- Linux v5.5-9824-g90568ecf5615 -- Enable DM_CLONE as a module (rhbz 1799060) -- Enable PCI Express devices on RockChip SoCs (rhbz 1792564) - -* Thu Feb 06 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc0.git4.1 -- Linux v5.5-9737-g4c46bef2e96a - -* Wed Feb 05 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc0.git3.1 -- Linux v5.5-9402-g6992ca0dd017 - -* Sat Feb 01 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc0.git2.1 -- Linux v5.5-8686-g14cd0bd04907 - -* Wed Jan 29 2020 Jeremy Cline <jcline@redhat.com> - 5.5.0-1 -- Linux v5.5-3996-gb3a608222336 - -* Wed Jan 29 2020 Jeremy Cline <jcline@redhat.com> -- Reenable debugging options. - -* Mon Jan 27 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-1 -- Linux v5.5 - -* Fri Jan 24 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc7.git2.1 -- Linux v5.5-rc7-62-g6381b442836e - -* Thu Jan 23 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc7.git1.1 -- Linux v5.5-rc7-16-g131701c697e8 - -* Mon Jan 20 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc7.git0.1 -- Linux v5.5-rc7 - -* Mon Jan 20 2020 Justin M. Forbes <jforbes@fedoraproject.org> -- Disable debugging options. - -* Fri Jan 17 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc6.git3.1 -- Linux v5.5-rc6-143-gab7541c3addd - -* Wed Jan 15 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc6.git2.1 -- Linux v5.5-rc6-45-g51d69817519f - -* Tue Jan 14 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc6.git1.1 -- Linux v5.5-rc6-27-g452424cdcbca -- Reenable debugging options. - -* Mon Jan 13 2020 Justin M. Forbes <jforbes@fedoraproject.org> -- Add Documentation back to kernel-devel as it has Kconfig now (rhbz 1789641) - -* Mon Jan 13 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc6.git0.1 -- Linux v5.5-rc6 - -* Mon Jan 13 2020 Justin M. Forbes <jforbes@fedoraproject.org> -- Disable debugging options. - -* Fri Jan 10 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc5.git3.1 -- Linux v5.5-rc5-215-g4e4cd21c64da - -* Thu Jan 09 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc5.git2.1 -- Linux v5.5-rc5-134-ge69ec487b2c7 - -* Wed Jan 08 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc5.git1.1 -- Linux v5.5-rc5-41-gb07f636fca1c -- Reenable debugging options. - -* Mon Jan 06 2020 Hans de Goede <hdegoede@redhat.com> -- Make the MFD Intel LPSS driver builtin, some devices require this to be - available early during boot (rhbz#1787997) - -* Mon Jan 06 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc5.git0.1 -- Linux v5.5-rc5 - -* Mon Jan 06 2020 Justin M. Forbes <jforbes@fedoraproject.org> -- Disable debugging options. - -* Fri Jan 03 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc4.git2.1 -- Linux v5.5-rc4-116-gbed723519a72 - -* Thu Jan 02 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc4.git1.1 -- Linux v5.5-rc4-66-g738d2902773e - -* Mon Dec 30 2019 Peter Robinson <pbrobinson@gmail.com> - 5.5.0-0.rc4.git0.1 -- Linux v5.5-rc4 - -* Mon Dec 30 2019 Peter Robinson <pbrobinson@gmail.com> -- Disable debugging options. - -* Mon Dec 23 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc3.git0.1 -- Linux v5.5-rc3 - -* Mon Dec 23 2019 Justin M. Forbes <jforbes@fedoraproject.org> -- Disable debugging options. - -* Thu Dec 19 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc2.git3.1 -- Linux v5.5-rc2-195-g4a94c4332334 - -* Wed Dec 18 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc2.git2.1 -- Linux v5.5-rc2-157-g2187f215ebaa - -* Tue Dec 17 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc2.git1.1 -- Linux v5.5-rc2-56-gea200dec5128 -- Enable NO_HZ_FULL for other arches too. -- Reenable debugging options. - -* Mon Dec 16 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc2.git0.1 -- Linux v5.5-rc2 - -* Mon Dec 16 2019 Justin M. Forbes <jforbes@fedoraproject.org> -- Disable debugging options. - -* Thu Dec 12 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc1.git2.1 -- Linux v5.5-rc1-27-gae4b064e2a61 - -* Tue Dec 10 2019 Peter Robinson <pbrobinson@fedoraproject.org> -- Updates for ARMv7/aarch64 -- Enable newer TI ARMv7 platforms - -* Tue Dec 10 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc1.git1.1 -- Linux v5.5-rc1-12-g6794862a16ef -- Reenable debugging options. - -* Mon Dec 09 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc1.git0.1 -- Linux v5.5-rc1 - -* Mon Dec 09 2019 Justin M. Forbes <jforbes@fedoraproject.org> -- Disable debugging options. - -* Fri Dec 06 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc0.git7.1 -- Linux v5.4-12941-gb0d4beaa5a4b - -* Thu Dec 05 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc0.git6.1 -- Linux v5.4-11747-g2f13437b8917 - -* Wed Dec 04 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc0.git5.1 -- Linux v5.4-11681-g63de37476ebd - -* Tue Dec 03 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc0.git4.1 -- Linux v5.4-11180-g76bb8b05960c - -* Mon Dec 02 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc0.git3.1 -- Linux v5.4-10271-g596cf45cbf6e - -* Wed Nov 27 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc0.git2.1 -- Linux v5.4-5280-g89d57dddd7d3 - -* Tue Nov 26 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc0.git1.1 -- Linux v5.4-3619-gbe2eca94d144 -- Reenable debugging options. - -* Mon Nov 25 2019 Laura Abbott <labbott@redhat.com> - 5.4.0-2 -- bump and build to pick up fixes - -* Mon Nov 25 2019 Justin M. Forbes <jforbes@fedoraproject.org> -- Fix CVE-2019-14895 (rhbz 1774870 1776139) -- Fix CVE-2019-14896 (rhbz 1774875 1776143) -- Fix CVE-2019-14897 (rhbz 1774879 1776146) -- Fix CVE-2019-14901 (rhbz 1773519 1776184) -- Fix CVE-2019-19078 (rhbz 1776354 1776353) - -* Mon Nov 25 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-1 -- Linux v5.4.0 - -* Fri Nov 22 2019 Laura Abbott <labbott@redhat.com> - 5.4.0-0.rc8.git1.2 -- bump and build to test new configs - -* Fri Nov 22 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc8.git1.1 -- Linux v5.4-rc8-15-g81429eb8d9ca - -* Fri Nov 22 2019 Jeremy Cline <jcline@redhat.com> -- Reenable debugging options. - -* Thu Nov 21 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.3.12-300 -- Fix CVE-2019-19071 (rhbz 1774949 1774950) -- Fix CVE-2019-19070 (rhbz 1774957 1774958) -- Fix CVE-2019-19068 (rhbz 1774963 1774965) -- Fix CVE-2019-19043 (rhbz 1774972 1774973) -- Fix CVE-2019-19066 (rhbz 1774976 1774978) -- Fix CVE-2019-19046 (rhbz 1774988 1774989) -- Fix CVE-2019-19050 (rhbz 1774998 1775002) -- Fix CVE-2019-19062 (rhbz 1775021 1775023) -- Fix CVE-2019-19064 (rhbz 1775010 1775011) -- Fix CVE-2019-19063 (rhbz 1775015 1775016) -- Fix CVE-2019-19057 (rhbz 1775050 1775051) -- Fix CVE-2019-19053 (rhbz 1775956 1775110) -- Fix CVE-2019-19056 (rhbz 1775097 1775115) -- Fix CVE-2019-19054 (rhbz 1775063 1775117) - -* Wed Nov 20 2019 Laura Abbott <labbott@redhat.com> - 5.4.0-0.rc8.git0.2 -- bump and build to check the pesign - -* Mon Nov 18 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc8.git0.1 -- Linux v5.4-rc8 - -* Mon Nov 18 2019 Jeremy Cline <jcline@redhat.com> -- Disable debugging options. - -* Fri Nov 15 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc7.git2.1 -- Linux v5.4-rc7-68-g96b95eff4a59 - -* Thu Nov 14 2019 Laura Abbott <labbott@redhat.com> - 5.4.0-0.rc7.git1.2 -- bump and build - -* Wed Nov 13 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc7.git1.1 -- Linux v5.4-rc7-49-g0e3f1ad80fc8 - -* Wed Nov 13 2019 Jeremy Cline <jcline@redhat.com> -- Reenable debugging options. - -* Mon Nov 11 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc7.git0.1 -- Linux v5.4-rc7 - -* Mon Nov 11 2019 Jeremy Cline <jcline@redhat.com> -- Disable debugging options. - -* Fri Nov 08 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc6.git3.1 -- Linux v5.4-rc6-29-g847120f859cc - -* Thu Nov 07 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc6.git2.1 -- Linux v5.4-rc6-26-g4dd58158254c - -* Tue Nov 05 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc6.git1.1 -- Linux v5.4-rc6-8-g26bc67213424 - -* Tue Nov 05 2019 Jeremy Cline <jcline@redhat.com> -- Reenable debugging options. - -* Mon Nov 04 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc6.git0.1 -- Linux v5.4-rc6 - -* Mon Nov 04 2019 Jeremy Cline <jcline@redhat.com> -- Disable debugging options. - -* Fri Nov 01 2019 Laura Abbott <labbott@redhat.com> - 5.4.0-0.rc5.git1.3 -- bump and build again - -* Thu Oct 31 2019 Laura Abbott <labbott@redhat.com> - 5.4.0-0.rc5.git1.2 -- bump and build to fix broken weak-updates - -* Thu Oct 31 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc5.git1.1 -- Linux v5.4-rc5-49-ge472c64aa4fa - -* Thu Oct 31 2019 Jeremy Cline <jcline@redhat.com> -- Reenable debugging options. - -* Wed Oct 30 2019 Laura Abbott <labbott@redhat.com> - 5.4.0-0.rc5.git0.2 -- bump and build to make sure I haven't broken anything - -* Mon Oct 28 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc5.git0.1 -- Linux v5.4-rc5 - -* Mon Oct 28 2019 Jeremy Cline <jcline@redhat.com> -- Disable debugging options. - -* Thu Oct 24 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc4.git3.1 -- Linux v5.4-rc4-85-gf116b96685a0 - -* Wed Oct 23 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc4.git2.1 -- Linux v5.4-rc4-37-g13b86bc4cd64 - -* Tue Oct 22 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc4.git1.1 -- Linux v5.4-rc4-18-g3b7c59a1950c - -* Tue Oct 22 2019 Jeremy Cline <jcline@redhat.com> -- Reenable debugging options. - -* Mon Oct 21 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc4.git0.1 -- Linux v5.4-rc4 - -* Mon Oct 21 2019 Jeremy Cline <jcline@redhat.com> -- Disable debugging options. - -* Fri Oct 18 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc3.git2.1 -- Linux v5.4-rc3-99-g0e2adab6cf28 - -* Tue Oct 15 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc3.git1.1 -- Linux v5.4-rc3-18-g5bc52f64e884 - -* Tue Oct 15 2019 Jeremy Cline <jcline@redhat.com> -- Reenable debugging options. - -* Mon Oct 14 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc3.git0.1 -- Linux v5.4-rc3 - -* Mon Oct 14 2019 Jeremy Cline <jcline@redhat.com> -- Disable debugging options. - -* Thu Oct 10 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc2.git2.1 -- Linux v5.4-rc2-96-gfb20da6af705 - -* Tue Oct 08 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc2.git1.1 -- Linux v5.4-rc2-20-geda57a0e4299 - -* Tue Oct 08 2019 Jeremy Cline <jcline@redhat.com> -- Reenable debugging options. - -* Mon Oct 07 2019 Laura Abbott <labbott@redhat.com> -- Enable a few NFT options (rhbz 1651813) - -* Mon Oct 07 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc2.git0.1 -- Linux v5.4-rc2 - -* Mon Oct 07 2019 Jeremy Cline <jcline@redhat.com> -- Disable debugging options. - -* Sun Oct 6 2019 Peter Robinson <pbrobinson@fedoraproject.org> -- Fixes for Jetson TX1/TX2 series of devices - -* Fri Oct 04 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc1.git1.1 -- Linux v5.4-rc1-14-gcc3a7bfe62b9 - -* Fri Oct 04 2019 Jeremy Cline <jcline@redhat.com> -- Reenable debugging options. - -* Wed Oct 02 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc1.git0.1 -- Linux v5.4-rc1 - -* Wed Oct 02 2019 Jeremy Cline <jcline@redhat.com> -- Disable debugging options. - -* Mon Sep 30 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc0.git9.1 -- Linux v5.3-13236-g97f9a3c4eee5 - -* Thu Sep 26 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc0.git8.1 -- Linux v5.3-12397-gf41def397161 - -* Wed Sep 25 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc0.git7.1 -- Linux v5.3-12289-g351c8a09b00b - -* Tue Sep 24 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc0.git6.1 -- Linux v5.3-12025-g4c07e2ddab5b - -* Mon Sep 23 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc0.git5.1 -- Linux v5.3-11768-g619e17cf75dd - -* Fri Sep 20 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc0.git4.1 -- Linux v5.3-10169-g574cc4539762 - -* Thu Sep 19 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc0.git3.1 -- Linux v5.3-7639-gb41dae061bbd - -* Wed Sep 18 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc0.git2.1 -- Linux v5.3-3839-g35f7a9526615 - -* Tue Sep 17 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc0.git1.1 -- Linux v5.3-2061-gad062195731b - -* Tue Sep 17 2019 Jeremy Cline <jcline@redhat.com> -- Reenable debugging options. +### +# The following Emacs magic makes C-c C-e use UTC dates. +# Local Variables: +# rpm-change-log-uses-utc: t +# End: +### |