diff options
Diffstat (limited to 'configs/fedora/generic')
164 files changed, 1596 insertions, 184 deletions
diff --git a/configs/fedora/generic/CONFIG_ARCH_KEEMBAY b/configs/fedora/generic/CONFIG_ARCH_KEEMBAY new file mode 100644 index 000000000..08875182c --- /dev/null +++ b/configs/fedora/generic/CONFIG_ARCH_KEEMBAY @@ -0,0 +1 @@ +# CONFIG_ARCH_KEEMBAY is not set diff --git a/configs/fedora/generic/CONFIG_ARCH_SPARX5 b/configs/fedora/generic/CONFIG_ARCH_SPARX5 new file mode 100644 index 000000000..cb416e991 --- /dev/null +++ b/configs/fedora/generic/CONFIG_ARCH_SPARX5 @@ -0,0 +1 @@ +# CONFIG_ARCH_SPARX5 is not set diff --git a/configs/fedora/generic/CONFIG_ARM_PSCI_CPUIDLE_DOMAIN b/configs/fedora/generic/CONFIG_ARM_PSCI_CPUIDLE_DOMAIN new file mode 100644 index 000000000..919e8a494 --- /dev/null +++ b/configs/fedora/generic/CONFIG_ARM_PSCI_CPUIDLE_DOMAIN @@ -0,0 +1 @@ +CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y diff --git a/configs/fedora/generic/CONFIG_ARM_SMCCC_SOC_ID b/configs/fedora/generic/CONFIG_ARM_SMCCC_SOC_ID new file mode 100644 index 000000000..c53e28f0b --- /dev/null +++ b/configs/fedora/generic/CONFIG_ARM_SMCCC_SOC_ID @@ -0,0 +1 @@ +CONFIG_ARM_SMCCC_SOC_ID=y diff --git a/configs/fedora/generic/CONFIG_BCACHE_ASYNC_REGISTRATION b/configs/fedora/generic/CONFIG_BCACHE_ASYNC_REGISTRATION new file mode 100644 index 000000000..b784152a8 --- /dev/null +++ b/configs/fedora/generic/CONFIG_BCACHE_ASYNC_REGISTRATION @@ -0,0 +1,20 @@ +# CONFIG_BCACHE_ASYNC_REGISTRATION: +# +# Add a sysfs file /sys/fs/bcache/register_async. Writing registering +# device path into this file will returns immediately and the real +# registration work is handled in kernel work queue in asynchronous +# way. +# +# Symbol: BCACHE_ASYNC_REGISTRATION [=n] +# Type : bool +# Defined at drivers/md/bcache/Kconfig:30 +# Prompt: Asynchronous device registration (EXPERIMENTAL) +# Depends on: MD [=y] && BCACHE [=m] +# Location: +# -> Device Drivers +# -> Multiple devices driver support (RAID and LVM) (MD [=y]) +# -> Block device as cache (BCACHE [=m]) +# +# +# +# CONFIG_BCACHE_ASYNC_REGISTRATION is not set diff --git a/configs/fedora/generic/CONFIG_CEC_CH7322 b/configs/fedora/generic/CONFIG_CEC_CH7322 new file mode 100644 index 000000000..eae30908d --- /dev/null +++ b/configs/fedora/generic/CONFIG_CEC_CH7322 @@ -0,0 +1,20 @@ +# CONFIG_CEC_CH7322: +# +# This is a driver for the Chrontel CH7322 CEC controller. It uses the +# generic CEC framework interface. +# CEC bus is present in the HDMI connector and enables communication +# between compatible devices. +# +# Symbol: CEC_CH7322 [=n] +# Type : tristate +# Defined at drivers/media/cec/i2c/Kconfig:5 +# Prompt: Chrontel CH7322 CEC controller +# Depends on: MEDIA_CEC_SUPPORT [=y] && I2C [=y] +# Location: +# -> Device Drivers +# -> HDMI CEC drivers (MEDIA_CEC_SUPPORT [=y]) +# Selects: REGMAP_I2C [=y] && CEC_CORE [=m] +# +# +# +CONFIG_CEC_CH7322=m diff --git a/configs/fedora/generic/CONFIG_CHARGER_BQ2515X b/configs/fedora/generic/CONFIG_CHARGER_BQ2515X new file mode 100644 index 000000000..b34559b56 --- /dev/null +++ b/configs/fedora/generic/CONFIG_CHARGER_BQ2515X @@ -0,0 +1,22 @@ +# CONFIG_CHARGER_BQ2515X: +# +# Say Y to enable support for the TI BQ2515X family of battery +# charging integrated circuits. The BQ2515X are highly integrated +# battery charge management ICs that integrate the most common +# functions for wearable devices, namely a charger, an output voltage +# rail, ADC for battery and system monitoring, and push-button +# controller. +# +# Symbol: CHARGER_BQ2515X [=n] +# Type : tristate +# Defined at drivers/power/supply/Kconfig:613 +# Prompt: TI BQ2515X battery charger family +# Depends on: POWER_SUPPLY [=y] && I2C [=y] && (GPIOLIB [=y] || COMPILE_TEST [=n]) +# Location: +# -> Device Drivers +# -> Power supply class support (POWER_SUPPLY [=y]) +# Selects: REGMAP_I2C [=y] +# +# +# +CONFIG_CHARGER_BQ2515X=m diff --git a/configs/fedora/generic/CONFIG_CMDLINE b/configs/fedora/generic/CONFIG_CMDLINE new file mode 100644 index 000000000..10611732c --- /dev/null +++ b/configs/fedora/generic/CONFIG_CMDLINE @@ -0,0 +1,17 @@ +# CONFIG_CMDLINE: +# +# On some platforms, there is currently no way for the boot loader to +# pass arguments to the kernel. For these platforms, you can supply +# some command-line options at build time by entering them here. In +# most cases you will need to specify the root device here. +# +# Symbol: CMDLINE [=] +# Type : string +# Defined at arch/powerpc/Kconfig:882 +# Prompt: Initial kernel command string +# Location: +# -> Kernel options +# +# +# +CONFIG_CMDLINE="" diff --git a/configs/fedora/generic/CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND b/configs/fedora/generic/CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND index 2a186347d..39bec5884 100644 --- a/configs/fedora/generic/CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND +++ b/configs/fedora/generic/CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND @@ -1 +1 @@ -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set diff --git a/configs/fedora/generic/CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL b/configs/fedora/generic/CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL index c08cd0d5d..97dc33b34 100644 --- a/configs/fedora/generic/CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL +++ b/configs/fedora/generic/CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL @@ -1 +1 @@ -# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y diff --git a/configs/fedora/generic/CONFIG_DEBUG_FS_ALLOW_ALL b/configs/fedora/generic/CONFIG_DEBUG_FS_ALLOW_ALL new file mode 100644 index 000000000..083ba7cb0 --- /dev/null +++ b/configs/fedora/generic/CONFIG_DEBUG_FS_ALLOW_ALL @@ -0,0 +1,19 @@ +# CONFIG_DEBUG_FS_ALLOW_ALL: +# +# No restrictions apply. Both API and filesystem registration +# is on. This is the normal default operation. +# +# Symbol: DEBUG_FS_ALLOW_ALL [=y] +# Type : bool +# Defined at lib/Kconfig.debug:500 +# Prompt: Access normal +# Depends on: <choice> +# Location: +# -> Kernel hacking +# -> Generic Kernel Debugging Instruments +# -> Debug Filesystem (DEBUG_FS [=y]) +# -> Debugfs default access (<choice> [=y]) +# +# +# +CONFIG_DEBUG_FS_ALLOW_ALL=y diff --git a/configs/fedora/generic/CONFIG_DEBUG_FS_ALLOW_NONE b/configs/fedora/generic/CONFIG_DEBUG_FS_ALLOW_NONE new file mode 100644 index 000000000..f61111aac --- /dev/null +++ b/configs/fedora/generic/CONFIG_DEBUG_FS_ALLOW_NONE @@ -0,0 +1,20 @@ +# CONFIG_DEBUG_FS_ALLOW_NONE: +# +# Access is off. Clients get -PERM when trying to create nodes in +# debugfs tree and debugfs is not registered as a filesystem. +# Client can then back-off or continue without debugfs access. +# +# Symbol: DEBUG_FS_ALLOW_NONE [=n] +# Type : bool +# Defined at lib/Kconfig.debug:513 +# Prompt: No access +# Depends on: <choice> +# Location: +# -> Kernel hacking +# -> Generic Kernel Debugging Instruments +# -> Debug Filesystem (DEBUG_FS [=y]) +# -> Debugfs default access (<choice> [=y]) +# +# +# +# CONFIG_DEBUG_FS_ALLOW_NONE is not set diff --git a/configs/fedora/generic/CONFIG_DEBUG_FS_DISALLOW_MOUNT b/configs/fedora/generic/CONFIG_DEBUG_FS_DISALLOW_MOUNT new file mode 100644 index 000000000..270523a05 --- /dev/null +++ b/configs/fedora/generic/CONFIG_DEBUG_FS_DISALLOW_MOUNT @@ -0,0 +1,20 @@ +# CONFIG_DEBUG_FS_DISALLOW_MOUNT: +# +# The API is open but filesystem is not loaded. Clients can still do +# their work and read with debug tools that do not need +# debugfs filesystem. +# +# Symbol: DEBUG_FS_DISALLOW_MOUNT [=n] +# Type : bool +# Defined at lib/Kconfig.debug:506 +# Prompt: Do not register debugfs as filesystem +# Depends on: <choice> +# Location: +# -> Kernel hacking +# -> Generic Kernel Debugging Instruments +# -> Debug Filesystem (DEBUG_FS [=y]) +# -> Debugfs default access (<choice> [=y]) +# +# +# +# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set diff --git a/configs/fedora/generic/CONFIG_DRM_AMD_DC_DCN3_0 b/configs/fedora/generic/CONFIG_DRM_AMD_DC_DCN3_0 new file mode 100644 index 000000000..80dd01306 --- /dev/null +++ b/configs/fedora/generic/CONFIG_DRM_AMD_DC_DCN3_0 @@ -0,0 +1,19 @@ +# CONFIG_DRM_AMD_DC_DCN3_0: +# +# Choose this option if you want to have +# sienna_cichlid support for display engine +# +# Symbol: DRM_AMD_DC_DCN3_0 [=n] +# Type : bool +# Defined at drivers/gpu/drm/amd/display/Kconfig:20 +# Prompt: DCN 3.0 family +# Depends on: HAS_IOMEM [=y] && DRM [=m] && DRM_AMDGPU [=m] && DRM_AMD_DC [=y] && X86 [=y] && DRM_AMD_DC_DCN [=y] +# Location: +# -> Device Drivers +# -> Graphics support +# -> AMD GPU (DRM_AMDGPU [=m]) +# -> Display Engine Configuration +# +# +# +CONFIG_DRM_AMD_DC_DCN3_0=y diff --git a/configs/fedora/generic/CONFIG_DRM_PANEL_ROCKTECH_JH057N00900 b/configs/fedora/generic/CONFIG_DRM_PANEL_ROCKTECH_JH057N00900 deleted file mode 100644 index 070c7734f..000000000 --- a/configs/fedora/generic/CONFIG_DRM_PANEL_ROCKTECH_JH057N00900 +++ /dev/null @@ -1 +0,0 @@ -CONFIG_DRM_PANEL_ROCKTECH_JH057N00900=m diff --git a/configs/fedora/generic/CONFIG_DRM_PANEL_XINGBANGDA_XBD599 b/configs/fedora/generic/CONFIG_DRM_PANEL_XINGBANGDA_XBD599 new file mode 100644 index 000000000..b3e186e66 --- /dev/null +++ b/configs/fedora/generic/CONFIG_DRM_PANEL_XINGBANGDA_XBD599 @@ -0,0 +1 @@ +# CONFIG_DRM_PANEL_XINGBANGDA_XBD599 is not set diff --git a/configs/fedora/generic/CONFIG_ENERGY_MODEL b/configs/fedora/generic/CONFIG_ENERGY_MODEL index ae61c90f2..a4fec3a5d 100644 --- a/configs/fedora/generic/CONFIG_ENERGY_MODEL +++ b/configs/fedora/generic/CONFIG_ENERGY_MODEL @@ -1 +1 @@ -# CONFIG_ENERGY_MODEL is not set +CONFIG_ENERGY_MODEL=y diff --git a/configs/fedora/generic/CONFIG_FB_ARMCLCD b/configs/fedora/generic/CONFIG_FB_ARMCLCD new file mode 100644 index 000000000..7d58051b7 --- /dev/null +++ b/configs/fedora/generic/CONFIG_FB_ARMCLCD @@ -0,0 +1 @@ +# CONFIG_FB_ARMCLCD is not set diff --git a/configs/fedora/generic/CONFIG_FS_ENCRYPTION_INLINE_CRYPT b/configs/fedora/generic/CONFIG_FS_ENCRYPTION_INLINE_CRYPT new file mode 100644 index 000000000..8b9b8eb8c --- /dev/null +++ b/configs/fedora/generic/CONFIG_FS_ENCRYPTION_INLINE_CRYPT @@ -0,0 +1,15 @@ +# CONFIG_FS_ENCRYPTION_INLINE_CRYPT: +# +# Enable fscrypt to use inline encryption hardware if available. +# +# Symbol: FS_ENCRYPTION_INLINE_CRYPT [=n] +# Type : bool +# Defined at fs/crypto/Kconfig:28 +# Prompt: Enable fscrypt to use inline crypto +# Depends on: FS_ENCRYPTION [=y] && BLK_INLINE_ENCRYPTION [=y] +# Location: +# -> File systems +# +# +# +CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y diff --git a/configs/fedora/generic/CONFIG_FW_LOADER_USER_HELPER b/configs/fedora/generic/CONFIG_FW_LOADER_USER_HELPER index 686f93187..8ce27a439 100644 --- a/configs/fedora/generic/CONFIG_FW_LOADER_USER_HELPER +++ b/configs/fedora/generic/CONFIG_FW_LOADER_USER_HELPER @@ -1 +1 @@ -# CONFIG_FW_LOADER_USER_HELPER is not set +CONFIG_FW_LOADER_USER_HELPER=y diff --git a/configs/fedora/generic/CONFIG_FW_LOADER_USER_HELPER_FALLBACK b/configs/fedora/generic/CONFIG_FW_LOADER_USER_HELPER_FALLBACK new file mode 100644 index 000000000..01cf23c75 --- /dev/null +++ b/configs/fedora/generic/CONFIG_FW_LOADER_USER_HELPER_FALLBACK @@ -0,0 +1,28 @@ +# CONFIG_FW_LOADER_USER_HELPER_FALLBACK: +# +# Enabling this option forces a sysfs userspace fallback mechanism +# to be used for all firmware requests which explicitly do not disable a +# a fallback mechanism. Firmware calls which do prohibit a fallback +# mechanism is request_firmware_direct(). This option is kept for +# backward compatibility purposes given this precise mechanism can also +# be enabled by setting the proc sysctl value to true: +# +# /proc/sys/kernel/firmware_config/force_sysfs_fallback +# +# If you are unsure about this, say N here. +# +# Symbol: FW_LOADER_USER_HELPER_FALLBACK [=n] +# Type : bool +# Defined at drivers/base/firmware_loader/Kconfig:143 +# Prompt: Force the firmware sysfs fallback mechanism when possible +# Depends on: FW_LOADER [=y] && FW_LOADER_USER_HELPER [=y] +# Location: +# -> Device Drivers +# -> Generic Driver Options +# -> Firmware loader +# -> Firmware loading facility (FW_LOADER [=y]) +# -> Enable the firmware sysfs fallback mechanism (FW_LOADER_USER_HELPER [=y]) +# +# +# +# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set diff --git a/configs/fedora/generic/CONFIG_GPIO_PCA9570 b/configs/fedora/generic/CONFIG_GPIO_PCA9570 new file mode 100644 index 000000000..7c54a29f9 --- /dev/null +++ b/configs/fedora/generic/CONFIG_GPIO_PCA9570 @@ -0,0 +1,20 @@ +# CONFIG_GPIO_PCA9570: +# +# Say yes here to enable the GPO driver for the NXP PCA9570 chip. +# +# To compile this driver as a module, choose M here: the module will +# be called gpio-pca9570. +# +# Symbol: GPIO_PCA9570 [=n] +# Type : tristate +# Defined at drivers/gpio/Kconfig:965 +# Prompt: PCA9570 4-Bit I2C GPO expander +# Depends on: GPIOLIB [=y] && I2C [=y] +# Location: +# -> Device Drivers +# -> GPIO Support (GPIOLIB [=y]) +# -> I2C GPIO expanders +# +# +# +CONFIG_GPIO_PCA9570=m diff --git a/configs/fedora/generic/CONFIG_HW_RANDOM_BA431 b/configs/fedora/generic/CONFIG_HW_RANDOM_BA431 new file mode 100644 index 000000000..ccafb50a2 --- /dev/null +++ b/configs/fedora/generic/CONFIG_HW_RANDOM_BA431 @@ -0,0 +1 @@ +# CONFIG_HW_RANDOM_BA431 is not set diff --git a/configs/fedora/generic/CONFIG_INFINIBAND_RTRS_SERVER b/configs/fedora/generic/CONFIG_INFINIBAND_RTRS_SERVER index 64ed34d9f..30fe516f4 100644 --- a/configs/fedora/generic/CONFIG_INFINIBAND_RTRS_SERVER +++ b/configs/fedora/generic/CONFIG_INFINIBAND_RTRS_SERVER @@ -1 +1,21 @@ +# CONFIG_INFINIBAND_RTRS_SERVER: +# +# RDMA transport server module. +# +# RDMA Transport (RTRS) server module processing connection and IO +# requests received from the RTRS client module, it will pass the +# IO requests to its user eg. RNBD_server. +# +# Symbol: INFINIBAND_RTRS_SERVER [=n] +# Type : tristate +# Defined at drivers/infiniband/ulp/rtrs/Kconfig:18 +# Prompt: RTRS server module +# Depends on: INFINIBAND [=m] && INFINIBAND_ADDR_TRANS [=y] +# Location: +# -> Device Drivers +# -> InfiniBand support (INFINIBAND [=m]) +# Selects: INFINIBAND_RTRS [=n] +# +# +# CONFIG_INFINIBAND_RTRS_SERVER=m diff --git a/configs/fedora/generic/CONFIG_INV_ICM42600_I2C b/configs/fedora/generic/CONFIG_INV_ICM42600_I2C new file mode 100644 index 000000000..3cb59b1c9 --- /dev/null +++ b/configs/fedora/generic/CONFIG_INV_ICM42600_I2C @@ -0,0 +1,22 @@ +# CONFIG_INV_ICM42600_I2C: +# +# This driver supports the InvenSense ICM-426xx motion tracking +# devices over I2C. +# +# This driver can be built as a module. The module will be called +# inv-icm42600-i2c. +# +# Symbol: INV_ICM42600_I2C [=n] +# Type : tristate +# Defined at drivers/iio/imu/inv_icm42600/Kconfig:7 +# Prompt: InvenSense ICM-426xx I2C driver +# Depends on: IIO [=m] && I2C [=y] +# Location: +# -> Device Drivers +# -> Industrial I/O support (IIO [=m]) +# -> Inertial measurement units +# Selects: INV_ICM42600 [=n] && REGMAP_I2C [=y] +# +# +# +CONFIG_INV_ICM42600_I2C=m diff --git a/configs/fedora/generic/CONFIG_INV_ICM42600_SPI b/configs/fedora/generic/CONFIG_INV_ICM42600_SPI new file mode 100644 index 000000000..361eb1072 --- /dev/null +++ b/configs/fedora/generic/CONFIG_INV_ICM42600_SPI @@ -0,0 +1,22 @@ +# CONFIG_INV_ICM42600_SPI: +# +# This driver supports the InvenSense ICM-426xx motion tracking +# devices over SPI. +# +# This driver can be built as a module. The module will be called +# inv-icm42600-spi. +# +# Symbol: INV_ICM42600_SPI [=n] +# Type : tristate +# Defined at drivers/iio/imu/inv_icm42600/Kconfig:19 +# Prompt: InvenSense ICM-426xx SPI driver +# Depends on: IIO [=m] && SPI_MASTER [=y] +# Location: +# -> Device Drivers +# -> Industrial I/O support (IIO [=m]) +# -> Inertial measurement units +# Selects: INV_ICM42600 [=n] && REGMAP_SPI [=m] +# +# +# +CONFIG_INV_ICM42600_SPI=m diff --git a/configs/fedora/generic/CONFIG_IR_SERIAL b/configs/fedora/generic/CONFIG_IR_SERIAL index 4da276f1e..53c7f1d81 100644 --- a/configs/fedora/generic/CONFIG_IR_SERIAL +++ b/configs/fedora/generic/CONFIG_IR_SERIAL @@ -1 +1 @@ -# CONFIG_IR_SERIAL is not set +CONFIG_IR_SERIAL=m diff --git a/configs/fedora/generic/CONFIG_IR_TOY b/configs/fedora/generic/CONFIG_IR_TOY new file mode 100644 index 000000000..8d83835cd --- /dev/null +++ b/configs/fedora/generic/CONFIG_IR_TOY @@ -0,0 +1,21 @@ +# CONFIG_IR_TOY: +# +# Say Y here if you want to use the Infrared Toy or IR Droid, USB +# versions. +# +# To compile this driver as a module, choose M here: the module will be +# called ir_toy. +# +# Symbol: IR_TOY [=n] +# Type : tristate +# Defined at drivers/media/rc/Kconfig:533 +# Prompt: Infrared Toy and IR Droid +# Depends on: RC_DEVICES [=y] && RC_CORE [=y] && USB_ARCH_HAS_HCD [=y] +# Location: +# -> Device Drivers +# -> Remote Controller support (RC_CORE [=y]) +# -> Remote Controller devices (RC_DEVICES [=y]) +# +# +# +CONFIG_IR_TOY=m diff --git a/configs/fedora/generic/CONFIG_KERNEL_ZSTD b/configs/fedora/generic/CONFIG_KERNEL_ZSTD new file mode 100644 index 000000000..f36b21cf3 --- /dev/null +++ b/configs/fedora/generic/CONFIG_KERNEL_ZSTD @@ -0,0 +1 @@ +# CONFIG_KERNEL_ZSTD is not set diff --git a/configs/fedora/generic/CONFIG_LEDS_CLASS_MULTICOLOR b/configs/fedora/generic/CONFIG_LEDS_CLASS_MULTICOLOR new file mode 100644 index 000000000..3d05c10b5 --- /dev/null +++ b/configs/fedora/generic/CONFIG_LEDS_CLASS_MULTICOLOR @@ -0,0 +1 @@ +CONFIG_LEDS_CLASS_MULTICOLOR=m diff --git a/configs/fedora/generic/CONFIG_LEDS_LP55XX_COMMON b/configs/fedora/generic/CONFIG_LEDS_LP55XX_COMMON new file mode 100644 index 000000000..0eef45844 --- /dev/null +++ b/configs/fedora/generic/CONFIG_LEDS_LP55XX_COMMON @@ -0,0 +1,18 @@ +# CONFIG_LEDS_LP55XX_COMMON: +# +# This option supports common operations for LP5521/5523/55231/5562/8501 +# devices. +# +# Symbol: LEDS_LP55XX_COMMON [=n] +# Type : tristate +# Defined at drivers/leds/Kconfig:398 +# Prompt: Common Driver for TI/National LP5521/5523/55231/5562/8501 +# Depends on: NEW_LEDS [=y] && (LEDS_CLASS_MULTICOLOR [=n] || !LEDS_CLASS_MULTICOLOR [=n]) && OF [=y] && I2C [=m] +# Location: +# -> Device Drivers +# -> LED Support (NEW_LEDS [=y]) +# Selects: FW_LOADER [=y] && FW_LOADER_USER_HELPER [=y] +# +# +# +# CONFIG_LEDS_LP55XX_COMMON is not set diff --git a/configs/fedora/generic/CONFIG_LTR501 b/configs/fedora/generic/CONFIG_LTR501 index 04512139d..3a1fbbcad 100644 --- a/configs/fedora/generic/CONFIG_LTR501 +++ b/configs/fedora/generic/CONFIG_LTR501 @@ -1 +1 @@ -# CONFIG_LTR501 is not set +CONFIG_LTR501=m diff --git a/configs/fedora/generic/CONFIG_MLX5_EN_IPSEC b/configs/fedora/generic/CONFIG_MLX5_EN_IPSEC new file mode 100644 index 000000000..3a0e47a5e --- /dev/null +++ b/configs/fedora/generic/CONFIG_MLX5_EN_IPSEC @@ -0,0 +1,21 @@ +# CONFIG_MLX5_EN_IPSEC: +# +# Build support for IPsec cryptography-offload accelaration in the NIC. +# Note: Support for hardware with this capability needs to be selected +# for this option to become available. +# +# Symbol: MLX5_EN_IPSEC [=n] +# Type : bool +# Defined at drivers/net/ethernet/mellanox/mlx5/core/Kconfig:150 +# Prompt: IPSec XFRM cryptography-offload accelaration +# Depends on: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MELLANOX [=y] && MLX5_CORE_EN [=y] && XFRM_OFFLOAD [=y] && (INET_ESP_OFFLOAD [=m] || INET6_ESP_OFFLOAD [=m]) && (MLX5_FPGA_IPSEC [=n] || MLX5_IPSEC [=y]) +# Location: +# -> Device Drivers +# -> Network device support (NETDEVICES [=y]) +# -> Ethernet driver support (ETHERNET [=y]) +# -> Mellanox devices (NET_VENDOR_MELLANOX [=y]) +# -> Mellanox Technologies IPsec Connect-X support (MLX5_IPSEC [=y]) +# +# +# +CONFIG_MLX5_EN_IPSEC=y diff --git a/configs/fedora/generic/CONFIG_MLX5_IPSEC b/configs/fedora/generic/CONFIG_MLX5_IPSEC new file mode 100644 index 000000000..f58856466 --- /dev/null +++ b/configs/fedora/generic/CONFIG_MLX5_IPSEC @@ -0,0 +1,22 @@ +# CONFIG_MLX5_IPSEC: +# +# Build IPsec support for the Connect-X family of network cards by Mellanox +# Technologies. +# Note: If you select this option, the mlx5_core driver will include +# IPsec support for the Connect-X family. +# +# Symbol: MLX5_IPSEC [=n] +# Type : bool +# Defined at drivers/net/ethernet/mellanox/mlx5/core/Kconfig:137 +# Prompt: Mellanox Technologies IPsec Connect-X support +# Depends on: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MELLANOX [=y] && MLX5_CORE_EN [=y] && XFRM_OFFLOAD [=y] && (INET_ESP_OFFLOAD [=m] || INET6_ESP_OFFLOAD [=m]) +# Location: +# -> Device Drivers +# -> Network device support (NETDEVICES [=y]) +# -> Ethernet driver support (ETHERNET [=y]) +# -> Mellanox devices (NET_VENDOR_MELLANOX [=y]) +# Selects: MLX5_ACCEL [=n] +# +# +# +CONFIG_MLX5_IPSEC=y diff --git a/configs/fedora/generic/CONFIG_MLX5_VDPA b/configs/fedora/generic/CONFIG_MLX5_VDPA new file mode 100644 index 000000000..d87730646 --- /dev/null +++ b/configs/fedora/generic/CONFIG_MLX5_VDPA @@ -0,0 +1,18 @@ +# CONFIG_MLX5_VDPA: +# +# Support library for Mellanox VDPA drivers. Provides code that is +# common for all types of VDPA drivers. The following drivers are planned: +# net, block. +# +# Symbol: MLX5_VDPA [=n] +# Type : bool +# Defined at drivers/vdpa/Kconfig:32 +# Prompt: MLX5 VDPA support library for ConnectX devices +# Depends on: VDPA [=m] && MLX5_CORE [=m] +# Location: +# -> Device Drivers +# -> vDPA drivers (VDPA [=m]) +# +# +# +CONFIG_MLX5_VDPA=y diff --git a/configs/fedora/generic/CONFIG_MLX5_VDPA_NET b/configs/fedora/generic/CONFIG_MLX5_VDPA_NET new file mode 100644 index 000000000..a187ea82a --- /dev/null +++ b/configs/fedora/generic/CONFIG_MLX5_VDPA_NET @@ -0,0 +1 @@ +CONFIG_MLX5_VDPA_NET=m diff --git a/configs/fedora/generic/CONFIG_MT7663S b/configs/fedora/generic/CONFIG_MT7663S new file mode 100644 index 000000000..e5c0ef87e --- /dev/null +++ b/configs/fedora/generic/CONFIG_MT7663S @@ -0,0 +1,21 @@ +# CONFIG_MT7663S: +# +# This adds support for MT7663S 802.11ac 2x2:2 wireless devices. +# +# To compile this driver as a module, choose M here. +# +# Symbol: MT7663S [=n] +# Type : tristate +# Defined at drivers/net/wireless/mediatek/mt76/mt7615/Kconfig:46 +# Prompt: MediaTek MT7663S (SDIO) support +# Depends on: NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_MEDIATEK [=y] && MAC80211 [=m] && MMC [=m] +# Location: +# -> Device Drivers +# -> Network device support (NETDEVICES [=y]) +# -> Wireless LAN (WLAN [=y]) +# -> MediaTek devices (WLAN_VENDOR_MEDIATEK [=y]) +# Selects: MT76_SDIO [=n] && MT7663_USB_SDIO_COMMON [=m] +# +# +# +CONFIG_MT7663S=m diff --git a/configs/fedora/generic/CONFIG_MXC4005 b/configs/fedora/generic/CONFIG_MXC4005 index 609438732..01c15eab9 100644 --- a/configs/fedora/generic/CONFIG_MXC4005 +++ b/configs/fedora/generic/CONFIG_MXC4005 @@ -1 +1 @@ -# CONFIG_MXC4005 is not set +CONFIG_MXC4005=m diff --git a/configs/fedora/generic/CONFIG_MXC6255 b/configs/fedora/generic/CONFIG_MXC6255 index e834351d7..2a69adc2b 100644 --- a/configs/fedora/generic/CONFIG_MXC6255 +++ b/configs/fedora/generic/CONFIG_MXC6255 @@ -1 +1 @@ -# CONFIG_MXC6255 is not set +CONFIG_MXC6255=m diff --git a/configs/fedora/generic/CONFIG_NET_DSA_TAG_RTL4_A b/configs/fedora/generic/CONFIG_NET_DSA_TAG_RTL4_A new file mode 100644 index 000000000..07c81b624 --- /dev/null +++ b/configs/fedora/generic/CONFIG_NET_DSA_TAG_RTL4_A @@ -0,0 +1,21 @@ +# CONFIG_NET_DSA_TAG_RTL4_A: +# +# Say Y or M if you want to enable support for tagging frames for the +# Realtek switches with 4 byte protocol A tags, sich as found in +# the Realtek RTL8366RB. +# +# Symbol: NET_DSA_TAG_RTL4_A [=n] +# Type : tristate +# Defined at net/dsa/Kconfig:89 +# Prompt: Tag driver for Realtek 4 byte protocol A tags +# Depends on: NET [=y] && NET_DSA [=m] +# Location: +# -> Networking support (NET [=y]) +# -> Networking options +# -> Distributed Switch Architecture (NET_DSA [=m]) +# Selected by [n]: +# - NET_DSA_REALTEK_SMI [=n] && NETDEVICES [=y] && HAVE_NET_DSA [=y] && NET_DSA [=m] +# +# +# +CONFIG_NET_DSA_TAG_RTL4_A=m diff --git a/configs/fedora/generic/CONFIG_NOUVEAU_DEBUG_PUSH b/configs/fedora/generic/CONFIG_NOUVEAU_DEBUG_PUSH new file mode 100644 index 000000000..c28eaf703 --- /dev/null +++ b/configs/fedora/generic/CONFIG_NOUVEAU_DEBUG_PUSH @@ -0,0 +1,18 @@ +# CONFIG_NOUVEAU_DEBUG_PUSH: +# +# Say Y here if you want to enable verbose push buffer debug output +# and sanity checks. +# +# Symbol: NOUVEAU_DEBUG_PUSH [=n] +# Type : bool +# Defined at drivers/gpu/drm/nouveau/Kconfig:79 +# Prompt: Enable additional push buffer debugging +# Depends on: HAS_IOMEM [=y] && DRM_NOUVEAU [=m] +# Location: +# -> Device Drivers +# -> Graphics support +# -> Nouveau (NVIDIA) cards (DRM_NOUVEAU [=m]) +# +# +# +# CONFIG_NOUVEAU_DEBUG_PUSH is not set diff --git a/configs/fedora/generic/CONFIG_NVME_TARGET_PASSTHRU b/configs/fedora/generic/CONFIG_NVME_TARGET_PASSTHRU new file mode 100644 index 000000000..3937aee43 --- /dev/null +++ b/configs/fedora/generic/CONFIG_NVME_TARGET_PASSTHRU @@ -0,0 +1,22 @@ +# CONFIG_NVME_TARGET_PASSTHRU: +# +# This enables target side NVMe passthru controller support for the +# NVMe Over Fabrics protocol. It allows for hosts to manage and +# directly access an actual NVMe controller residing on the target +# side, incuding executing Vendor Unique Commands. +# +# If unsure, say N. +# +# Symbol: NVME_TARGET_PASSTHRU [=n] +# Type : bool +# Defined at drivers/nvme/target/Kconfig:19 +# Prompt: NVMe Target Passthrough support +# Depends on: NVME_TARGET [=m] && (NVME_CORE [=m]=y || NVME_CORE [=m]=NVME_TARGET [=m]) +# Location: +# -> Device Drivers +# -> NVME Support +# -> NVMe Target support (NVME_TARGET [=m]) +# +# +# +CONFIG_NVME_TARGET_PASSTHRU=y diff --git a/configs/fedora/generic/CONFIG_PCIE_XILINX_CPM b/configs/fedora/generic/CONFIG_PCIE_XILINX_CPM new file mode 100644 index 000000000..87f5c7913 --- /dev/null +++ b/configs/fedora/generic/CONFIG_PCIE_XILINX_CPM @@ -0,0 +1,19 @@ +# CONFIG_PCIE_XILINX_CPM: +# +# Say 'Y' here if you want kernel support for the +# Xilinx Versal CPM host bridge. +# +# Symbol: PCIE_XILINX_CPM [=n] +# Type : bool +# Defined at drivers/pci/controller/Kconfig:102 +# Prompt: Xilinx Versal CPM host bridge support +# Depends on: PCI [=y] && (ARCH_ZYNQMP [=y] || COMPILE_TEST [=n]) +# Location: +# -> Device Drivers +# -> PCI support (PCI [=y]) +# -> PCI controller drivers +# Selects: PCI_HOST_COMMON [=y] +# +# +# +CONFIG_PCIE_XILINX_CPM=y diff --git a/configs/fedora/generic/CONFIG_PCI_J721E_HOST b/configs/fedora/generic/CONFIG_PCI_J721E_HOST new file mode 100644 index 000000000..55fdf298e --- /dev/null +++ b/configs/fedora/generic/CONFIG_PCI_J721E_HOST @@ -0,0 +1,21 @@ +# CONFIG_PCI_J721E_HOST: +# +# Say Y here if you want to support the TI J721E PCIe platform +# controller in host mode. TI J721E PCIe controller uses Cadence PCIe +# core. +# +# Symbol: PCI_J721E_HOST [=n] +# Type : bool +# Defined at drivers/pci/controller/cadence/Kconfig:48 +# Prompt: TI J721E PCIe platform host controller +# Depends on: PCI [=y] && OF [=y] +# Location: +# -> Device Drivers +# -> PCI support (PCI [=y]) +# -> PCI controller drivers +# -> Cadence PCIe controllers support +# Selects: PCIE_CADENCE_HOST [=n] && PCI_J721E [=n] +# +# +# +CONFIG_PCI_J721E_HOST=y diff --git a/configs/fedora/generic/CONFIG_PHY_QCOM_IPQ806X_USB b/configs/fedora/generic/CONFIG_PHY_QCOM_IPQ806X_USB new file mode 100644 index 000000000..de880c0fb --- /dev/null +++ b/configs/fedora/generic/CONFIG_PHY_QCOM_IPQ806X_USB @@ -0,0 +1 @@ +# CONFIG_PHY_QCOM_IPQ806X_USB is not set diff --git a/configs/fedora/generic/CONFIG_PINCTRL_EMMITSBURG b/configs/fedora/generic/CONFIG_PINCTRL_EMMITSBURG new file mode 100644 index 000000000..2a312f217 --- /dev/null +++ b/configs/fedora/generic/CONFIG_PINCTRL_EMMITSBURG @@ -0,0 +1,18 @@ +# CONFIG_PINCTRL_EMMITSBURG: +# +# This pinctrl driver provides an interface that allows configuring +# of Intel Emmitsburg pins and using them as GPIOs. +# +# Symbol: PINCTRL_EMMITSBURG [=n] +# Type : tristate +# Defined at drivers/pinctrl/intel/Kconfig:98 +# Prompt: Intel Emmitsburg pinctrl and GPIO driver +# Depends on: PINCTRL [=y] && (X86 [=y] || COMPILE_TEST [=n]) && ACPI [=y] +# Location: +# -> Device Drivers +# -> Pin controllers (PINCTRL [=y]) +# Selects: PINCTRL_INTEL [=m] +# +# +# +CONFIG_PINCTRL_EMMITSBURG=m diff --git a/configs/fedora/generic/CONFIG_PINCTRL_JASPERLAKE b/configs/fedora/generic/CONFIG_PINCTRL_JASPERLAKE index 59ec9a1e7..09f84c415 100644 --- a/configs/fedora/generic/CONFIG_PINCTRL_JASPERLAKE +++ b/configs/fedora/generic/CONFIG_PINCTRL_JASPERLAKE @@ -1,18 +1 @@ -# CONFIG_PINCTRL_JASPERLAKE: -# -# This pinctrl driver provides an interface that allows configuring -# of Intel Jasper Lake PCH pins and using them as GPIOs. -# -# Symbol: PINCTRL_JASPERLAKE [=n] -# Type : tristate -# Defined at drivers/pinctrl/intel/Kconfig:114 -# Prompt: Intel Jasper Lake PCH pinctrl and GPIO driver -# Depends on: PINCTRL [=y] && (X86 [=y] || COMPILE_TEST [=n]) && ACPI [=y] -# Location: -# -> Device Drivers -# -> Pin controllers (PINCTRL [=y]) -# Selects: PINCTRL_INTEL [=m] -# -# -# # CONFIG_PINCTRL_JASPERLAKE is not set diff --git a/configs/fedora/generic/CONFIG_PINCTRL_SM8250 b/configs/fedora/generic/CONFIG_PINCTRL_SM8250 index 383eb8bef..490872420 100644 --- a/configs/fedora/generic/CONFIG_PINCTRL_SM8250 +++ b/configs/fedora/generic/CONFIG_PINCTRL_SM8250 @@ -1,19 +1 @@ -# CONFIG_PINCTRL_SM8250: -# -# This is the pinctrl, pinmux, pinconf and gpiolib driver for the -# Qualcomm Technologies Inc TLMM block found on the Qualcomm -# Technologies Inc SM8250 platform. -# -# Symbol: PINCTRL_SM8250 [=n] -# Type : tristate -# Defined at drivers/pinctrl/qcom/Kconfig:219 -# Prompt: Qualcomm Technologies Inc SM8250 pin controller driver -# Depends on: PINCTRL [=y] && (ARCH_QCOM [=y] || COMPILE_TEST [=n]) && GPIOLIB [=y] && OF [=y] -# Location: -# -> Device Drivers -# -> Pin controllers (PINCTRL [=y]) -# Selects: PINCTRL_MSM [=y] -# -# -# # CONFIG_PINCTRL_SM8250 is not set diff --git a/configs/fedora/generic/CONFIG_PMS7003 b/configs/fedora/generic/CONFIG_PMS7003 index 08f08456b..4246b9df8 100644 --- a/configs/fedora/generic/CONFIG_PMS7003 +++ b/configs/fedora/generic/CONFIG_PMS7003 @@ -1 +1 @@ -# CONFIG_PMS7003 is not set +CONFIG_PMS7003=m diff --git a/configs/fedora/generic/CONFIG_POWER_RESET_LINKSTATION b/configs/fedora/generic/CONFIG_POWER_RESET_LINKSTATION new file mode 100644 index 000000000..345f1bc9d --- /dev/null +++ b/configs/fedora/generic/CONFIG_POWER_RESET_LINKSTATION @@ -0,0 +1,20 @@ +# CONFIG_POWER_RESET_LINKSTATION: +# +# This driver supports turning off some Buffalo LinkStations by +# setting an output pin at the ethernet PHY to the correct state. +# It also makes the device compatible with the WoL function. +# +# Say Y here if you have a Buffalo LinkStation LS421D/E. +# +# Symbol: POWER_RESET_LINKSTATION [=n] +# Type : tristate +# Defined at drivers/power/reset/Kconfig:102 +# Prompt: Buffalo LinkStation power-off driver +# Depends on: POWER_RESET [=y] && (ARCH_MVEBU [=y] || COMPILE_TEST [=n]) && OF_MDIO [=y] && PHYLIB [=y] +# Location: +# -> Device Drivers +# -> Board level reset or power off (POWER_RESET [=y]) +# +# +# +# CONFIG_POWER_RESET_LINKSTATION is not set diff --git a/configs/fedora/generic/CONFIG_PPC_PROT_SAO_LPAR b/configs/fedora/generic/CONFIG_PPC_PROT_SAO_LPAR new file mode 100644 index 000000000..88471b97e --- /dev/null +++ b/configs/fedora/generic/CONFIG_PPC_PROT_SAO_LPAR @@ -0,0 +1,21 @@ +# CONFIG_PPC_PROT_SAO_LPAR: +# +# This option adds support for PROT_SAO mappings from userspace +# inside LPARs on supported CPUs. +# +# This may cause issues when performing guest migration from +# a CPU that supports SAO to one that does not. +# +# If unsure, say N here. +# +# Symbol: PPC_PROT_SAO_LPAR [=n] +# Type : bool +# Defined at arch/powerpc/Kconfig:863 +# Prompt: Support PROT_SAO mappings in LPARs +# Depends on: PPC_BOOK3S_64 [=y] +# Location: +# -> Kernel options +# +# +# +# CONFIG_PPC_PROT_SAO_LPAR is not set diff --git a/configs/fedora/generic/CONFIG_PPC_QUEUED_SPINLOCKS b/configs/fedora/generic/CONFIG_PPC_QUEUED_SPINLOCKS new file mode 100644 index 000000000..90ecdc77e --- /dev/null +++ b/configs/fedora/generic/CONFIG_PPC_QUEUED_SPINLOCKS @@ -0,0 +1,22 @@ +# CONFIG_PPC_QUEUED_SPINLOCKS: +# +# Say Y here to use queued spinlocks which give better scalability and +# fairness on large SMP and NUMA systems without harming single threaded +# performance. +# +# This option is currently experimental, the code is more complex and +# less tested so it defaults to "N" for the moment. +# +# If unsure, say "N". +# +# Symbol: PPC_QUEUED_SPINLOCKS [=n] +# Type : bool +# Defined at arch/powerpc/Kconfig:497 +# Prompt: Queued spinlocks +# Depends on: SMP [=y] +# Location: +# -> Kernel options +# +# +# +# CONFIG_PPC_QUEUED_SPINLOCKS is not set diff --git a/configs/fedora/generic/CONFIG_RCU_REF_SCALE_TEST b/configs/fedora/generic/CONFIG_RCU_REF_SCALE_TEST new file mode 100644 index 000000000..7e44994b2 --- /dev/null +++ b/configs/fedora/generic/CONFIG_RCU_REF_SCALE_TEST @@ -0,0 +1,24 @@ +# CONFIG_RCU_REF_SCALE_TEST: +# +# This option provides a kernel module that runs performance tests +# useful comparing RCU with various read-side synchronization mechanisms. +# The kernel module may be built after the fact on the running kernel to be +# tested, if desired. +# +# Say Y here if you want these performance tests built into the kernel. +# Say M if you want to build it as a module instead. +# Say N if you are unsure. +# +# Symbol: RCU_REF_SCALE_TEST [=n] +# Type : tristate +# Defined at kernel/rcu/Kconfig.debug:64 +# Prompt: Scalability tests for read-side synchronization (RCU and others) +# Depends on: DEBUG_KERNEL [=y] +# Location: +# -> Kernel hacking +# -> RCU Debugging +# Selects: TORTURE_TEST [=m] && SRCU [=y] && TASKS_RCU [=y] && TASKS_RUDE_RCU [=y] && TASKS_TRACE_RCU [=y] +# +# +# +# CONFIG_RCU_REF_SCALE_TEST is not set diff --git a/configs/fedora/generic/CONFIG_RD_ZSTD b/configs/fedora/generic/CONFIG_RD_ZSTD new file mode 100644 index 000000000..da1496ccb --- /dev/null +++ b/configs/fedora/generic/CONFIG_RD_ZSTD @@ -0,0 +1 @@ +CONFIG_RD_ZSTD=y diff --git a/configs/fedora/generic/CONFIG_REGULATOR_FAN53880 b/configs/fedora/generic/CONFIG_REGULATOR_FAN53880 new file mode 100644 index 000000000..9c63fafa0 --- /dev/null +++ b/configs/fedora/generic/CONFIG_REGULATOR_FAN53880 @@ -0,0 +1 @@ +# CONFIG_REGULATOR_FAN53880 is not set diff --git a/configs/fedora/generic/CONFIG_REGULATOR_PCA9450 b/configs/fedora/generic/CONFIG_REGULATOR_PCA9450 new file mode 100644 index 000000000..8545b10b3 --- /dev/null +++ b/configs/fedora/generic/CONFIG_REGULATOR_PCA9450 @@ -0,0 +1 @@ +# CONFIG_REGULATOR_PCA9450 is not set diff --git a/configs/fedora/generic/CONFIG_REGULATOR_SY8827N b/configs/fedora/generic/CONFIG_REGULATOR_SY8827N new file mode 100644 index 000000000..fafd2495e --- /dev/null +++ b/configs/fedora/generic/CONFIG_REGULATOR_SY8827N @@ -0,0 +1 @@ +# CONFIG_REGULATOR_SY8827N is not set diff --git a/configs/fedora/generic/CONFIG_REMOTEPROC_CDEV b/configs/fedora/generic/CONFIG_REMOTEPROC_CDEV new file mode 100644 index 000000000..3d980c3ed --- /dev/null +++ b/configs/fedora/generic/CONFIG_REMOTEPROC_CDEV @@ -0,0 +1,21 @@ +# CONFIG_REMOTEPROC_CDEV: +# +# Say y here to have a character device interface for the remoteproc +# framework. Userspace can boot/shutdown remote processors through +# this interface. +# +# It's safe to say N if you don't want to use this interface. +# +# Symbol: REMOTEPROC_CDEV [=n] +# Type : bool +# Defined at drivers/remoteproc/Kconfig:17 +# Prompt: Remoteproc character device interface +# Depends on: REMOTEPROC [=y] +# Location: +# -> Device Drivers +# -> Remoteproc drivers +# -> Support for Remote Processor subsystem (REMOTEPROC [=y]) +# +# +# +# CONFIG_REMOTEPROC_CDEV is not set diff --git a/configs/fedora/generic/CONFIG_RTW88_8821CE b/configs/fedora/generic/CONFIG_RTW88_8821CE new file mode 100644 index 000000000..60488c2d1 --- /dev/null +++ b/configs/fedora/generic/CONFIG_RTW88_8821CE @@ -0,0 +1,22 @@ +# CONFIG_RTW88_8821CE: +# +# Select this option will enable support for 8821CE chipset +# +# 802.11ac PCIe wireless network adapter +# +# Symbol: RTW88_8821CE [=n] +# Type : tristate +# Defined at drivers/net/wireless/realtek/rtw88/Kconfig:64 +# Prompt: Realtek 8821CE PCI wireless network adapter +# Depends on: NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_REALTEK [=y] && RTW88 [=m] && PCI [=y] +# Location: +# -> Device Drivers +# -> Network device support (NETDEVICES [=y]) +# -> Wireless LAN (WLAN [=y]) +# -> Realtek devices (WLAN_VENDOR_REALTEK [=y]) +# -> Realtek 802.11ac wireless chips support (RTW88 [=m]) +# Selects: RTW88_CORE [=m] && RTW88_PCI [=m] && RTW88_8821C [=n] +# +# +# +CONFIG_RTW88_8821CE=m diff --git a/configs/fedora/generic/CONFIG_SCD30_CORE b/configs/fedora/generic/CONFIG_SCD30_CORE new file mode 100644 index 000000000..a3c1fc0e0 --- /dev/null +++ b/configs/fedora/generic/CONFIG_SCD30_CORE @@ -0,0 +1 @@ +CONFIG_SCD30_CORE=m diff --git a/configs/fedora/generic/CONFIG_SCD30_I2C b/configs/fedora/generic/CONFIG_SCD30_I2C new file mode 100644 index 000000000..695773492 --- /dev/null +++ b/configs/fedora/generic/CONFIG_SCD30_I2C @@ -0,0 +1 @@ +CONFIG_SCD30_I2C=m diff --git a/configs/fedora/generic/CONFIG_SCD30_SERIAL b/configs/fedora/generic/CONFIG_SCD30_SERIAL new file mode 100644 index 000000000..5a6d7ce05 --- /dev/null +++ b/configs/fedora/generic/CONFIG_SCD30_SERIAL @@ -0,0 +1 @@ +CONFIG_SCD30_SERIAL=m diff --git a/configs/fedora/generic/CONFIG_SCSI_UFS_CRYPTO b/configs/fedora/generic/CONFIG_SCSI_UFS_CRYPTO new file mode 100644 index 000000000..463ff2db5 --- /dev/null +++ b/configs/fedora/generic/CONFIG_SCSI_UFS_CRYPTO @@ -0,0 +1,20 @@ +# CONFIG_SCSI_UFS_CRYPTO: +# +# Enable Crypto Engine Support in UFS. +# Enabling this makes it possible for the kernel to use the crypto +# capabilities of the UFS device (if present) to perform crypto +# operations on data being transferred to/from the device. +# +# Symbol: SCSI_UFS_CRYPTO [=n] +# Type : bool +# Defined at drivers/scsi/ufs/Kconfig:177 +# Prompt: UFS Crypto Engine Support +# Depends on: SCSI_LOWLEVEL [=y] && SCSI [=y] && SCSI_UFSHCD [=m] && BLK_INLINE_ENCRYPTION [=y] +# Location: +# -> Device Drivers +# -> SCSI device support +# -> SCSI low-level drivers (SCSI_LOWLEVEL [=y]) +# +# +# +CONFIG_SCSI_UFS_CRYPTO=y diff --git a/configs/fedora/generic/CONFIG_SC_LPASS_CORECC_7180 b/configs/fedora/generic/CONFIG_SC_LPASS_CORECC_7180 new file mode 100644 index 000000000..8b8d3f835 --- /dev/null +++ b/configs/fedora/generic/CONFIG_SC_LPASS_CORECC_7180 @@ -0,0 +1,21 @@ +# CONFIG_SC_LPASS_CORECC_7180: +# +# Support for the LPASS(Low Power Audio Subsystem) core clock controller +# on SC7180 devices. +# Say Y if you want to use LPASS clocks and power domains of the LPASS +# core clock controller. +# +# Symbol: SC_LPASS_CORECC_7180 [=n] +# Type : tristate +# Defined at drivers/clk/qcom/Kconfig:311 +# Prompt: SC7180 LPASS Core Clock Controller +# Depends on: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] +# Location: +# -> Device Drivers +# -> Common Clock Framework (COMMON_CLK [=y]) +# -> Support for Qualcomm's clock controllers (COMMON_CLK_QCOM [=y]) +# Selects: SC_GCC_7180 [=n] +# +# +# +CONFIG_SC_LPASS_CORECC_7180=m diff --git a/configs/fedora/generic/CONFIG_SENSORS_CORSAIR_CPRO b/configs/fedora/generic/CONFIG_SENSORS_CORSAIR_CPRO new file mode 100644 index 000000000..795c24652 --- /dev/null +++ b/configs/fedora/generic/CONFIG_SENSORS_CORSAIR_CPRO @@ -0,0 +1,20 @@ +# CONFIG_SENSORS_CORSAIR_CPRO: +# +# If you say yes here you get support for the Corsair Commander Pro +# controller. +# +# This driver can also be built as a module. If so, the module +# will be called corsair-cpro. +# +# Symbol: SENSORS_CORSAIR_CPRO [=n] +# Type : tristate +# Defined at drivers/hwmon/Kconfig:442 +# Prompt: Corsair Commander Pro controller +# Depends on: HWMON [=y] && HID [=y] +# Location: +# -> Device Drivers +# -> Hardware Monitoring support (HWMON [=y]) +# +# +# +CONFIG_SENSORS_CORSAIR_CPRO=m diff --git a/configs/fedora/generic/CONFIG_SERIAL_IMX_EARLYCON b/configs/fedora/generic/CONFIG_SERIAL_IMX_EARLYCON new file mode 100644 index 000000000..897399639 --- /dev/null +++ b/configs/fedora/generic/CONFIG_SERIAL_IMX_EARLYCON @@ -0,0 +1 @@ +# CONFIG_SERIAL_IMX_EARLYCON is not set diff --git a/configs/fedora/generic/CONFIG_SERIAL_LANTIQ b/configs/fedora/generic/CONFIG_SERIAL_LANTIQ index 5fc2caf1f..7bd602b2f 100644 --- a/configs/fedora/generic/CONFIG_SERIAL_LANTIQ +++ b/configs/fedora/generic/CONFIG_SERIAL_LANTIQ @@ -1,21 +1 @@ -# CONFIG_SERIAL_LANTIQ: -# -# Support for UART on Lantiq and Intel SoCs. -# To compile this driver as a module, select M here. The -# module will be called lantiq. -# -# Symbol: SERIAL_LANTIQ [=n] -# Type : tristate -# Defined at drivers/tty/serial/Kconfig:1036 -# Prompt: Lantiq serial driver -# Depends on: TTY [=y] && HAS_IOMEM [=y] && (LANTIQ || X86 [=y] || COMPILE_TEST [=n]) -# Location: -# -> Device Drivers -# -> Character devices -# -> Enable TTY (TTY [=y]) -# -> Serial drivers -# Selects: SERIAL_CORE [=y] -# -# -# # CONFIG_SERIAL_LANTIQ is not set diff --git a/configs/fedora/generic/CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM b/configs/fedora/generic/CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM new file mode 100644 index 000000000..21111cd3c --- /dev/null +++ b/configs/fedora/generic/CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM @@ -0,0 +1,26 @@ +# CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM: +# +# Intel hardware has a feature called 'silent stream', that +# keeps external HDMI receiver's analog circuitry powered on +# avoiding 2-3 sec silence during playback start. This mechanism +# relies on setting channel_id as 0xf, sending info packet and +# preventing codec D3 entry (increasing platform static power +# consumption when HDMI receiver is plugged-in). 2-3 sec silence +# at the playback start is expected whenever there is format change. +# (default is 2 channel format). +# Say Y to enable Silent Stream feature. +# +# Symbol: SND_HDA_INTEL_HDMI_SILENT_STREAM [=n] +# Type : bool +# Defined at sound/pci/hda/Kconfig:243 +# Prompt: Enable Silent Stream always for HDMI +# Depends on: SOUND [=m] && !UML && SND [=m] && SND_HDA [=m] && SND_HDA_INTEL [=m] +# Location: +# -> Device Drivers +# -> Sound card support (SOUND [=m]) +# -> Advanced Linux Sound Architecture (SND [=m]) +# -> HD-Audio +# +# +# +CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM=y diff --git a/configs/fedora/generic/CONFIG_SND_SOC_INTEL_KEEMBAY b/configs/fedora/generic/CONFIG_SND_SOC_INTEL_KEEMBAY new file mode 100644 index 000000000..ab9c9f372 --- /dev/null +++ b/configs/fedora/generic/CONFIG_SND_SOC_INTEL_KEEMBAY @@ -0,0 +1,19 @@ +# CONFIG_SND_SOC_INTEL_KEEMBAY: +# +# If you have a Intel Keembay platform then enable this option +# by saying Y or m. +# +# Symbol: SND_SOC_INTEL_KEEMBAY [=n] +# Type : tristate +# Defined at sound/soc/intel/Kconfig:243 +# Prompt: Keembay Platforms +# Depends on: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && (ARM64 [=y] || COMPILE_TEST [=n]) && COMMON_CLK [=y] +# Location: +# -> Device Drivers +# -> Sound card support (SOUND [=m]) +# -> Advanced Linux Sound Architecture (SND [=m]) +# -> ALSA for SoC audio support (SND_SOC [=m]) +# +# +# +CONFIG_SND_SOC_INTEL_KEEMBAY=m diff --git a/configs/fedora/generic/CONFIG_SND_SOC_MAX98373_I2C b/configs/fedora/generic/CONFIG_SND_SOC_MAX98373_I2C new file mode 100644 index 000000000..964bca19c --- /dev/null +++ b/configs/fedora/generic/CONFIG_SND_SOC_MAX98373_I2C @@ -0,0 +1 @@ +CONFIG_SND_SOC_MAX98373_I2C=m diff --git a/configs/fedora/generic/CONFIG_SND_SOC_MAX98373_SDW b/configs/fedora/generic/CONFIG_SND_SOC_MAX98373_SDW new file mode 100644 index 000000000..9dd95fd3f --- /dev/null +++ b/configs/fedora/generic/CONFIG_SND_SOC_MAX98373_SDW @@ -0,0 +1,29 @@ +# CONFIG_SND_SOC_MAX98373_SDW: +# +# Enable support for Maxim Integrated MAX98373 Soundwire +# amplifier. MAX98373 supports either the MIPI SoundWire +# compatible interface for audio and control data, or +# the PCM interface for audio data and a standard I2C +# interface for control data. Select this if MAX98373 is +# connected via soundwire. +# +# Symbol: SND_SOC_MAX98373_SDW [=n] +# Type : tristate +# Defined at sound/soc/codecs/Kconfig:879 +# Prompt: Maxim Integrated MAX98373 Speaker Amplifier - SDW +# Depends on: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SOUNDWIRE [=y] +# Location: +# -> Device Drivers +# -> Sound card support (SOUND [=m]) +# -> Advanced Linux Sound Architecture (SND [=m]) +# -> ALSA for SoC audio support (SND_SOC [=m]) +# -> CODEC drivers +# Selects: SND_SOC_MAX98373 [=m] && REGMAP_SOUNDWIRE [=m] +# Selected by [n]: +# - SND_SOC_INTEL_SOUNDWIRE_SOF_MACH [=n] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_SOC_INTEL_MACH [=y] && SND_SOC_SOF_INTEL_SOUNDWIRE && I2C [=y] && ACPI [=y] && GPIOLIB [=y] && (MFD_INTEL_LPSS [=y] || COMPILE_TEST [=n]) && (SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES [=y] || COMPILE_TEST [=n]) && SOUNDWIRE [=y] && SND_HDA_CODEC_HDMI [=m] && SND_SOC_SOF_HDA_AUDIO_CODEC [=y] +# Implied by [n]: +# - SND_SOC_ALL_CODECS [=n] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMPILE_TEST [=n] +# +# +# +CONFIG_SND_SOC_MAX98373_SDW=m diff --git a/configs/fedora/generic/CONFIG_SND_SOC_SAMSUNG_ARIES_WM8994 b/configs/fedora/generic/CONFIG_SND_SOC_SAMSUNG_ARIES_WM8994 new file mode 100644 index 000000000..c18b6fe3a --- /dev/null +++ b/configs/fedora/generic/CONFIG_SND_SOC_SAMSUNG_ARIES_WM8994 @@ -0,0 +1,24 @@ +# CONFIG_SND_SOC_SAMSUNG_ARIES_WM8994: +# +# Say Y if you want to add support for SoC audio on Aries boards, +# which has a WM8994 codec connected to a BT codec, a cellular +# modem, and the Samsung I2S controller. Jack detection is done +# via ADC, GPIOs, and an extcon device. Switching between the Mic +# and TV-Out path is also handled. +# +# Symbol: SND_SOC_SAMSUNG_ARIES_WM8994 [=n] +# Type : tristate +# Defined at sound/soc/samsung/Kconfig:215 +# Prompt: SoC I2S Audio support for WM8994 on Aries +# Depends on: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_SOC_SAMSUNG [=m] && MFD_WM8994 [=m] && IIO [=m] && EXTCON [=y] +# Location: +# -> Device Drivers +# -> Sound card support (SOUND [=m]) +# -> Advanced Linux Sound Architecture (SND [=m]) +# -> ALSA for SoC audio support (SND_SOC [=m]) +# -> ASoC support for Samsung (SND_SOC_SAMSUNG [=m]) +# Selects: SND_SOC_BT_SCO [=n] && SND_SOC_WM8994 [=m] && SND_SAMSUNG_I2S [=m] +# +# +# +# CONFIG_SND_SOC_SAMSUNG_ARIES_WM8994 is not set diff --git a/configs/fedora/generic/CONFIG_SND_SOC_SAMSUNG_MIDAS_WM1811 b/configs/fedora/generic/CONFIG_SND_SOC_SAMSUNG_MIDAS_WM1811 new file mode 100644 index 000000000..87f4e2afa --- /dev/null +++ b/configs/fedora/generic/CONFIG_SND_SOC_SAMSUNG_MIDAS_WM1811 @@ -0,0 +1,20 @@ +# CONFIG_SND_SOC_SAMSUNG_MIDAS_WM1811: +# +# Say Y if you want to add support for SoC audio on the Midas boards. +# +# Symbol: SND_SOC_SAMSUNG_MIDAS_WM1811 [=n] +# Type : tristate +# Defined at sound/soc/samsung/Kconfig:228 +# Prompt: SoC I2S Audio support for Midas boards +# Depends on: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_SOC_SAMSUNG [=m] +# Location: +# -> Device Drivers +# -> Sound card support (SOUND [=m]) +# -> Advanced Linux Sound Architecture (SND [=m]) +# -> ALSA for SoC audio support (SND_SOC [=m]) +# -> ASoC support for Samsung (SND_SOC_SAMSUNG [=m]) +# Selects: SND_SAMSUNG_I2S [=m] && SND_SOC_WM8994 [=m] +# +# +# +CONFIG_SND_SOC_SAMSUNG_MIDAS_WM1811=m diff --git a/configs/fedora/generic/CONFIG_SND_SOC_TEGRA210_I2S b/configs/fedora/generic/CONFIG_SND_SOC_TEGRA210_I2S new file mode 100644 index 000000000..c15424f08 --- /dev/null +++ b/configs/fedora/generic/CONFIG_SND_SOC_TEGRA210_I2S @@ -0,0 +1,23 @@ +# CONFIG_SND_SOC_TEGRA210_I2S: +# +# Config to enable the Inter-IC Sound (I2S) Controller which +# implements full-duplex and bidirectional and single direction +# point-to-point serial interfaces. It can interface with I2S +# compatible devices. +# Say Y or M if you want to add support for Tegra210 I2S module. +# +# Symbol: SND_SOC_TEGRA210_I2S [=n] +# Type : tristate +# Defined at sound/soc/tegra/Kconfig:86 +# Prompt: Tegra210 I2S module +# Depends on: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_SOC_TEGRA [=m] +# Location: +# -> Device Drivers +# -> Sound card support (SOUND [=m]) +# -> Advanced Linux Sound Architecture (SND [=m]) +# -> ALSA for SoC audio support (SND_SOC [=m]) +# -> SoC Audio for the Tegra System-on-Chip (SND_SOC_TEGRA [=m]) +# +# +# +CONFIG_SND_SOC_TEGRA210_I2S=m diff --git a/configs/fedora/generic/CONFIG_SOC_CAMERA b/configs/fedora/generic/CONFIG_SOC_CAMERA deleted file mode 100644 index e4623ae1a..000000000 --- a/configs/fedora/generic/CONFIG_SOC_CAMERA +++ /dev/null @@ -1 +0,0 @@ -# CONFIG_SOC_CAMERA is not set diff --git a/configs/fedora/generic/CONFIG_SPI_CADENCE_QUADSPI b/configs/fedora/generic/CONFIG_SPI_CADENCE_QUADSPI new file mode 100644 index 000000000..7c242fd0d --- /dev/null +++ b/configs/fedora/generic/CONFIG_SPI_CADENCE_QUADSPI @@ -0,0 +1 @@ +# CONFIG_SPI_CADENCE_QUADSPI is not set diff --git a/configs/fedora/generic/CONFIG_SPI_LANTIQ_SSC b/configs/fedora/generic/CONFIG_SPI_LANTIQ_SSC new file mode 100644 index 000000000..f93334dd3 --- /dev/null +++ b/configs/fedora/generic/CONFIG_SPI_LANTIQ_SSC @@ -0,0 +1 @@ +# CONFIG_SPI_LANTIQ_SSC is not set diff --git a/configs/fedora/generic/CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU b/configs/fedora/generic/CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU index 123cbd7db..79f750f7e 100644 --- a/configs/fedora/generic/CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU +++ b/configs/fedora/generic/CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU @@ -1 +1 @@ -# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set +CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y diff --git a/configs/fedora/generic/CONFIG_SQUASHFS_DECOMP_SINGLE b/configs/fedora/generic/CONFIG_SQUASHFS_DECOMP_SINGLE index 5978a504e..4b1be50eb 100644 --- a/configs/fedora/generic/CONFIG_SQUASHFS_DECOMP_SINGLE +++ b/configs/fedora/generic/CONFIG_SQUASHFS_DECOMP_SINGLE @@ -1 +1 @@ -CONFIG_SQUASHFS_DECOMP_SINGLE=y +# CONFIG_SQUASHFS_DECOMP_SINGLE is not set diff --git a/configs/fedora/generic/CONFIG_SQUASHFS_FILE_CACHE b/configs/fedora/generic/CONFIG_SQUASHFS_FILE_CACHE index 15b6bd660..fc22b2a90 100644 --- a/configs/fedora/generic/CONFIG_SQUASHFS_FILE_CACHE +++ b/configs/fedora/generic/CONFIG_SQUASHFS_FILE_CACHE @@ -1 +1 @@ -CONFIG_SQUASHFS_FILE_CACHE=y +# CONFIG_SQUASHFS_FILE_CACHE is not set diff --git a/configs/fedora/generic/CONFIG_SQUASHFS_FILE_DIRECT b/configs/fedora/generic/CONFIG_SQUASHFS_FILE_DIRECT index 50eff586d..dee95e704 100644 --- a/configs/fedora/generic/CONFIG_SQUASHFS_FILE_DIRECT +++ b/configs/fedora/generic/CONFIG_SQUASHFS_FILE_DIRECT @@ -1 +1 @@ -# CONFIG_SQUASHFS_FILE_DIRECT is not set +CONFIG_SQUASHFS_FILE_DIRECT=y diff --git a/configs/fedora/generic/CONFIG_TEST_FPU b/configs/fedora/generic/CONFIG_TEST_FPU new file mode 100644 index 000000000..e8667e1a0 --- /dev/null +++ b/configs/fedora/generic/CONFIG_TEST_FPU @@ -0,0 +1,22 @@ +# CONFIG_TEST_FPU: +# +# Enable this option to add /sys/kernel/debug/selftest_helpers/test_fpu +# which will trigger a sequence of floating point operations. This is used +# for self-testing floating point control register setting in +# kernel_fpu_begin(). +# +# If unsure, say N. +# +# Symbol: TEST_FPU [=n] +# Type : tristate +# Defined at lib/Kconfig.debug:2317 +# Prompt: Test floating point operations in kernel space +# Depends on: RUNTIME_TESTING_MENU [=y] && X86 [=y] && !KCOV_INSTRUMENT_ALL [=n] +# Location: +# -> Kernel hacking +# -> Kernel Testing and Coverage +# -> Runtime Testing (RUNTIME_TESTING_MENU [=y]) +# +# +# +# CONFIG_TEST_FPU is not set diff --git a/configs/fedora/generic/CONFIG_TEST_FREE_PAGES b/configs/fedora/generic/CONFIG_TEST_FREE_PAGES new file mode 100644 index 000000000..246fdf83a --- /dev/null +++ b/configs/fedora/generic/CONFIG_TEST_FREE_PAGES @@ -0,0 +1 @@ +# CONFIG_TEST_FREE_PAGES is not set diff --git a/configs/fedora/generic/CONFIG_THERMAL_NETLINK b/configs/fedora/generic/CONFIG_THERMAL_NETLINK new file mode 100644 index 000000000..df9c5079b --- /dev/null +++ b/configs/fedora/generic/CONFIG_THERMAL_NETLINK @@ -0,0 +1,19 @@ +# CONFIG_THERMAL_NETLINK: +# +# The thermal framework has a netlink interface to do thermal +# zones discovery, temperature readings and events such as +# trip point crossed, cooling device update or governor +# change. It is recommended to enable the feature. +# +# Symbol: THERMAL_NETLINK [=n] +# Type : bool +# Defined at drivers/thermal/Kconfig:20 +# Prompt: Thermal netlink management +# Depends on: THERMAL [=y] && NET [=y] +# Location: +# -> Device Drivers +# -> Thermal drivers (THERMAL [=y]) +# +# +# +CONFIG_THERMAL_NETLINK=y diff --git a/configs/fedora/generic/CONFIG_TMPFS_INODE64 b/configs/fedora/generic/CONFIG_TMPFS_INODE64 new file mode 100644 index 000000000..8e974b6e2 --- /dev/null +++ b/configs/fedora/generic/CONFIG_TMPFS_INODE64 @@ -0,0 +1,31 @@ +# CONFIG_TMPFS_INODE64: +# +# tmpfs has historically used only inode numbers as wide as an unsigned +# int. In some cases this can cause wraparound, potentially resulting +# in multiple files with the same inode number on a single device. This +# option makes tmpfs use the full width of ino_t by default, without +# needing to specify the inode64 option when mounting. +# +# But if a long-lived tmpfs is to be accessed by 32-bit applications so +# ancient that opening a file larger than 2GiB fails with EINVAL, then +# the INODE64 config option and inode64 mount option risk operations +# failing with EOVERFLOW once 33-bit inode numbers are reached. +# +# To override this configured default, use the inode32 or inode64 +# option when mounting. +# +# If unsure, say N. +# +# Symbol: TMPFS_INODE64 [=n] +# Type : bool +# Defined at fs/Kconfig:204 +# Prompt: Use 64-bit ino_t by default in tmpfs +# Depends on: TMPFS [=y] && 64BIT [=y] +# Location: +# -> File systems +# -> Pseudo filesystems +# -> Tmpfs virtual memory file system support (former shm fs) (TMPFS [=y]) +# +# +# +CONFIG_TMPFS_INODE64=y diff --git a/configs/fedora/generic/CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB b/configs/fedora/generic/CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB new file mode 100644 index 000000000..487bf399c --- /dev/null +++ b/configs/fedora/generic/CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB @@ -0,0 +1,19 @@ +# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB: +# +# If you say Y here, then Linux will refuse to enumerate +# external hubs. OTG hosts are allowed to reduce hardware +# and software costs by not supporting external hubs. So +# are "Embedded Hosts" that don't offer OTG support. +# +# Symbol: USB_OTG_DISABLE_EXTERNAL_HUB [=n] +# Type : bool +# Defined at drivers/usb/core/Kconfig:69 +# Prompt: Disable external hubs +# Depends on: USB_SUPPORT [=y] && USB [=y] && (USB_OTG [=y] || EXPERT [=n]) +# Location: +# -> Device Drivers +# -> USB support (USB_SUPPORT [=y]) +# +# +# +# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set diff --git a/configs/fedora/generic/CONFIG_USB_OTG_PRODUCTLIST b/configs/fedora/generic/CONFIG_USB_OTG_PRODUCTLIST new file mode 100644 index 000000000..639540198 --- /dev/null +++ b/configs/fedora/generic/CONFIG_USB_OTG_PRODUCTLIST @@ -0,0 +1,21 @@ +# CONFIG_USB_OTG_PRODUCTLIST: +# +# If you say Y here, the "otg_productlist.h" file will be used as a +# product list, so USB peripherals not listed there will be +# rejected during enumeration. This behavior is required by the +# USB OTG and EH specification for all devices not on your product's +# "Targeted Peripherals List". "Embedded Hosts" are likewise +# allowed to support only a limited number of peripherals. +# +# Symbol: USB_OTG_PRODUCTLIST [=n] +# Type : bool +# Defined at drivers/usb/core/Kconfig:58 +# Prompt: Rely on OTG and EH Targeted Peripherals List +# Depends on: USB_SUPPORT [=y] && USB [=y] +# Location: +# -> Device Drivers +# -> USB support (USB_SUPPORT [=y]) +# +# +# +# CONFIG_USB_OTG_PRODUCTLIST is not set diff --git a/configs/fedora/generic/CONFIG_VIDEO_DW9768 b/configs/fedora/generic/CONFIG_VIDEO_DW9768 new file mode 100644 index 000000000..1203dc51b --- /dev/null +++ b/configs/fedora/generic/CONFIG_VIDEO_DW9768 @@ -0,0 +1,23 @@ +# CONFIG_VIDEO_DW9768: +# +# This is a driver for the DW9768 camera lens voice coil. +# DW9768 is a 10 bit DAC with 100mA output current sink +# capability. This is designed for linear control of +# voice coil motors, controlled via I2C serial interface. +# +# Symbol: VIDEO_DW9768 [=n] +# Type : tristate +# Defined at drivers/media/i2c/Kconfig:1283 +# Prompt: DW9768 lens voice coil support +# Depends on: MEDIA_SUPPORT [=m] && I2C [=y] && VIDEO_V4L2 [=m] +# Visible if: MEDIA_SUPPORT [=m] && I2C [=y] && VIDEO_V4L2 [=m] && MEDIA_CAMERA_SUPPORT [=y] +# Location: +# -> Device Drivers +# -> Multimedia support (MEDIA_SUPPORT [=m]) +# -> Media ancillary drivers +# -> Lens drivers +# Selects: MEDIA_CONTROLLER [=y] && VIDEO_V4L2_SUBDEV_API [=y] && V4L2_FWNODE [=m] +# +# +# +CONFIG_VIDEO_DW9768=m diff --git a/configs/fedora/generic/CONFIG_VIDEO_IMX290 b/configs/fedora/generic/CONFIG_VIDEO_IMX290 index a39625af6..baa36bf20 100644 --- a/configs/fedora/generic/CONFIG_VIDEO_IMX290 +++ b/configs/fedora/generic/CONFIG_VIDEO_IMX290 @@ -1,24 +1 @@ -# CONFIG_VIDEO_IMX290: -# -# This is a Video4Linux2 sensor driver for the Sony -# IMX290 camera sensor. -# -# To compile this driver as a module, choose M here: the -# module will be called imx290. -# -# Symbol: VIDEO_IMX290 [=n] -# Type : tristate -# Defined at drivers/media/i2c/Kconfig:777 -# Prompt: Sony IMX290 sensor support -# Depends on: MEDIA_SUPPORT [=m] && I2C [=y] && VIDEO_V4L2 [=m] -# Visible if: MEDIA_SUPPORT [=m] && I2C [=y] && VIDEO_V4L2 [=m] && MEDIA_CAMERA_SUPPORT [=y] -# Location: -# -> Device Drivers -# -> Multimedia support (MEDIA_SUPPORT [=m]) -# -> Media ancillary drivers -# -> Camera sensor devices -# Selects: MEDIA_CONTROLLER [=y] && VIDEO_V4L2_SUBDEV_API [=y] && REGMAP_I2C [=y] && V4L2_FWNODE [=m] -# -# -# CONFIG_VIDEO_IMX290=m diff --git a/configs/fedora/generic/CONFIG_VIDEO_MT9M111 b/configs/fedora/generic/CONFIG_VIDEO_MT9M111 index ba548bbc3..3b5763078 100644 --- a/configs/fedora/generic/CONFIG_VIDEO_MT9M111 +++ b/configs/fedora/generic/CONFIG_VIDEO_MT9M111 @@ -1,23 +1 @@ -# CONFIG_VIDEO_MT9M111: -# -# This driver supports MT9M111, MT9M112 and MT9M131 cameras from -# Micron/Aptina -# -# Symbol: VIDEO_MT9M111 [=n] -# Type : tristate -# Defined at drivers/media/i2c/Kconfig:1078 -# Prompt: mt9m111, mt9m112 and mt9m131 support -# Depends on: MEDIA_SUPPORT [=m] && I2C [=y] && VIDEO_V4L2 [=m] -# Visible if: MEDIA_SUPPORT [=m] && I2C [=y] && VIDEO_V4L2 [=m] && MEDIA_CAMERA_SUPPORT [=y] -# Location: -# -> Device Drivers -# -> Multimedia support (MEDIA_SUPPORT [=m]) -# -> Media ancillary drivers -# -> Camera sensor devices -# Selects: V4L2_FWNODE [=m] -# Selected by [n]: -# - SOC_CAMERA_MT9M111 [=n] && STAGING [=y] && STAGING_MEDIA [=y] && MEDIA_SUPPORT [=m] && SOC_CAMERA [=n] && I2C [=y] -# -# -# -CONFIG_VIDEO_MT9M111=m +# CONFIG_VIDEO_MT9M111 is not set diff --git a/configs/fedora/generic/CONFIG_VIDEO_RDACM20 b/configs/fedora/generic/CONFIG_VIDEO_RDACM20 new file mode 100644 index 000000000..494b5be1b --- /dev/null +++ b/configs/fedora/generic/CONFIG_VIDEO_RDACM20 @@ -0,0 +1,24 @@ +# CONFIG_VIDEO_RDACM20: +# +# This driver supports the IMI RDACM20 GMSL camera, used in +# ADAS systems. +# +# This camera should be used in conjunction with a GMSL +# deserialiser such as the MAX9286. +# +# Symbol: VIDEO_RDACM20 [=n] +# Type : tristate +# Defined at drivers/media/i2c/Kconfig:1174 +# Prompt: IMI RDACM20 camera support +# Depends on: MEDIA_SUPPORT [=m] && VIDEO_V4L2 [=m] && I2C [=y] +# Visible if: MEDIA_SUPPORT [=m] && VIDEO_V4L2 [=m] && I2C [=y] && MEDIA_CAMERA_SUPPORT [=y] +# Location: +# -> Device Drivers +# -> Multimedia support (MEDIA_SUPPORT [=m]) +# -> Media ancillary drivers +# -> Camera sensor devices +# Selects: V4L2_FWNODE [=m] && VIDEO_V4L2_SUBDEV_API [=y] && MEDIA_CONTROLLER [=y] +# +# +# +CONFIG_VIDEO_RDACM20=m diff --git a/configs/fedora/generic/CONFIG_WLAN_VENDOR_MICROCHIP b/configs/fedora/generic/CONFIG_WLAN_VENDOR_MICROCHIP new file mode 100644 index 000000000..7fde12ef2 --- /dev/null +++ b/configs/fedora/generic/CONFIG_WLAN_VENDOR_MICROCHIP @@ -0,0 +1,22 @@ +# CONFIG_WLAN_VENDOR_MICROCHIP: +# +# If you have a wireless card belonging to this class, say Y. +# +# Note that the answer to this question doesn't directly affect the +# kernel: saying N will just cause the configurator to skip all the +# questions about these cards. If you say Y, you will be asked for +# your specific card in the following questions. +# +# Symbol: WLAN_VENDOR_MICROCHIP [=y] +# Type : bool +# Defined at drivers/net/wireless/microchip/Kconfig:2 +# Prompt: Microchip devices +# Depends on: NETDEVICES [=y] && WLAN [=y] +# Location: +# -> Device Drivers +# -> Network device support (NETDEVICES [=y]) +# -> Wireless LAN (WLAN [=y]) +# +# +# +CONFIG_WLAN_VENDOR_MICROCHIP=y diff --git a/configs/fedora/generic/CONFIG_XEN_UNPOPULATED_ALLOC b/configs/fedora/generic/CONFIG_XEN_UNPOPULATED_ALLOC new file mode 100644 index 000000000..79f2db99b --- /dev/null +++ b/configs/fedora/generic/CONFIG_XEN_UNPOPULATED_ALLOC @@ -0,0 +1,19 @@ +# CONFIG_XEN_UNPOPULATED_ALLOC: +# +# Use unpopulated memory ranges in order to create mappings for guest +# memory regions, including grant maps and foreign pages. This avoids +# having to balloon out RAM regions in order to obtain physical memory +# space to create such mappings. +# +# Symbol: XEN_UNPOPULATED_ALLOC [=y] +# Type : bool +# Defined at drivers/xen/Kconfig:328 +# Prompt: Use unpopulated memory ranges for guest mappings +# Depends on: XEN [=y] && X86 [=y] && ZONE_DEVICE [=y] +# Location: +# -> Device Drivers +# -> Xen driver support +# +# +# +CONFIG_XEN_UNPOPULATED_ALLOC=y diff --git a/configs/fedora/generic/CONFIG_XILINX_ZYNQMP_DPDMA b/configs/fedora/generic/CONFIG_XILINX_ZYNQMP_DPDMA new file mode 100644 index 000000000..08524461d --- /dev/null +++ b/configs/fedora/generic/CONFIG_XILINX_ZYNQMP_DPDMA @@ -0,0 +1,20 @@ +# CONFIG_XILINX_ZYNQMP_DPDMA: +# +# Enable support for Xilinx ZynqMP DisplayPort DMA. Choose this option +# if you have a Xilinx ZynqMP SoC with a DisplayPort subsystem. The +# driver provides the dmaengine required by the DisplayPort subsystem +# display driver. +# +# Symbol: XILINX_ZYNQMP_DPDMA [=n] +# Type : tristate +# Defined at drivers/dma/Kconfig:711 +# Prompt: Xilinx DPDMA Engine +# Depends on: DMADEVICES [=y] +# Location: +# -> Device Drivers +# -> DMA Engine support (DMADEVICES [=y]) +# Selects: DMA_ENGINE [=y] && DMA_VIRTUAL_CHANNELS [=y] +# +# +# +# CONFIG_XILINX_ZYNQMP_DPDMA is not set diff --git a/configs/fedora/generic/arm/CONFIG_ARCH_KEEMBAY b/configs/fedora/generic/arm/CONFIG_ARCH_KEEMBAY new file mode 100644 index 000000000..08875182c --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_ARCH_KEEMBAY @@ -0,0 +1 @@ +# CONFIG_ARCH_KEEMBAY is not set diff --git a/configs/fedora/generic/arm/CONFIG_ARCH_MSTARV7 b/configs/fedora/generic/arm/CONFIG_ARCH_MSTARV7 new file mode 100644 index 000000000..f05757a87 --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_ARCH_MSTARV7 @@ -0,0 +1 @@ +# CONFIG_ARCH_MSTARV7 is not set diff --git a/configs/fedora/generic/arm/CONFIG_ARCH_SPARX5 b/configs/fedora/generic/arm/CONFIG_ARCH_SPARX5 new file mode 100644 index 000000000..cb416e991 --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_ARCH_SPARX5 @@ -0,0 +1 @@ +# CONFIG_ARCH_SPARX5 is not set diff --git a/configs/fedora/generic/arm/CONFIG_ARM_PSCI_CPUIDLE_DOMAIN b/configs/fedora/generic/arm/CONFIG_ARM_PSCI_CPUIDLE_DOMAIN new file mode 100644 index 000000000..919e8a494 --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_ARM_PSCI_CPUIDLE_DOMAIN @@ -0,0 +1 @@ +CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y diff --git a/configs/fedora/generic/arm/CONFIG_ARM_SMCCC_SOC_ID b/configs/fedora/generic/arm/CONFIG_ARM_SMCCC_SOC_ID new file mode 100644 index 000000000..c53e28f0b --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_ARM_SMCCC_SOC_ID @@ -0,0 +1 @@ +CONFIG_ARM_SMCCC_SOC_ID=y diff --git a/configs/fedora/generic/arm/CONFIG_ARM_TEGRA194_CPUFREQ b/configs/fedora/generic/arm/CONFIG_ARM_TEGRA194_CPUFREQ new file mode 100644 index 000000000..661d4bf29 --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_ARM_TEGRA194_CPUFREQ @@ -0,0 +1,17 @@ +# CONFIG_ARM_TEGRA194_CPUFREQ: +# +# This adds CPU frequency driver support for Tegra194 SOCs. +# +# Symbol: ARM_TEGRA194_CPUFREQ [=y] +# Type : tristate +# Defined at drivers/cpufreq/Kconfig.arm:319 +# Prompt: Tegra194 CPUFreq support +# Depends on: CPU_FREQ [=y] && (ARM || ARM64 [=y]) && ARCH_TEGRA_194_SOC [=y] && TEGRA_BPMP [=y] +# Location: +# -> CPU Power Management +# -> CPU Frequency scaling +# -> CPU Frequency scaling (CPU_FREQ [=y]) +# +# +# +CONFIG_ARM_TEGRA194_CPUFREQ=y diff --git a/configs/fedora/generic/arm/CONFIG_CEC_CROS_EC b/configs/fedora/generic/arm/CONFIG_CEC_CROS_EC index 93dfc968c..4ac6d101f 100644 --- a/configs/fedora/generic/arm/CONFIG_CEC_CROS_EC +++ b/configs/fedora/generic/arm/CONFIG_CEC_CROS_EC @@ -1,20 +1 @@ -# CONFIG_CEC_CROS_EC: -# -# If you say yes here you will get support for the -# ChromeOS Embedded Controller's CEC. -# The CEC bus is present in the HDMI connector and enables communication -# between compatible devices. -# -# Symbol: CEC_CROS_EC [=n] -# Type : tristate -# Defined at drivers/media/cec/platform/Kconfig:5 -# Prompt: ChromeOS EC CEC driver -# Depends on: MEDIA_CEC_SUPPORT [=y] && CROS_EC [=m] -# Location: -# -> Device Drivers -# -> HDMI CEC drivers (MEDIA_CEC_SUPPORT [=y]) -# Selects: CEC_CORE [=m] && CEC_NOTIFIER [=y] && CROS_EC_PROTO [=y] -# -# -# CONFIG_CEC_CROS_EC=m diff --git a/configs/fedora/generic/arm/CONFIG_CLKSRC_STM32_LP b/configs/fedora/generic/arm/CONFIG_CLKSRC_STM32_LP new file mode 100644 index 000000000..0ba922e2d --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_CLKSRC_STM32_LP @@ -0,0 +1 @@ +# CONFIG_CLKSRC_STM32_LP is not set diff --git a/configs/fedora/generic/arm/CONFIG_CLK_BCM2711_DVP b/configs/fedora/generic/arm/CONFIG_CLK_BCM2711_DVP new file mode 100644 index 000000000..06ea43dbd --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_CLK_BCM2711_DVP @@ -0,0 +1 @@ +CONFIG_CLK_BCM2711_DVP=m diff --git a/configs/fedora/generic/arm/CONFIG_DRM_ZYNQMP_DPSUB b/configs/fedora/generic/arm/CONFIG_DRM_ZYNQMP_DPSUB new file mode 100644 index 000000000..ff6365416 --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_DRM_ZYNQMP_DPSUB @@ -0,0 +1 @@ +CONFIG_DRM_ZYNQMP_DPSUB=m diff --git a/configs/fedora/generic/arm/CONFIG_IPQ_APSS_6018 b/configs/fedora/generic/arm/CONFIG_IPQ_APSS_6018 new file mode 100644 index 000000000..0f993828c --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_IPQ_APSS_6018 @@ -0,0 +1,22 @@ +# CONFIG_IPQ_APSS_6018: +# +# Support for APSS clock controller on IPQ platforms. The +# APSS clock controller manages the Mux and enable block that feeds the +# CPUs. +# Say Y if you want to support CPU frequency scaling on +# ipq based devices. +# +# Symbol: IPQ_APSS_6018 [=n] +# Type : tristate +# Defined at drivers/clk/qcom/Kconfig:109 +# Prompt: IPQ APSS Clock Controller +# Depends on: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (QCOM_APCS_IPC [=m] || COMPILE_TEST [=n]) +# Location: +# -> Device Drivers +# -> Common Clock Framework (COMMON_CLK [=y]) +# -> Support for Qualcomm's clock controllers (COMMON_CLK_QCOM [=y]) +# Selects: IPQ_APSS_PLL [=n] +# +# +# +# CONFIG_IPQ_APSS_6018 is not set diff --git a/configs/fedora/generic/arm/CONFIG_IPQ_APSS_PLL b/configs/fedora/generic/arm/CONFIG_IPQ_APSS_PLL new file mode 100644 index 000000000..e37e906de --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_IPQ_APSS_PLL @@ -0,0 +1,22 @@ +# CONFIG_IPQ_APSS_PLL: +# +# Support for APSS PLL on ipq devices. The APSS PLL is the main +# clock that feeds the CPUs on ipq based devices. +# Say Y if you want to support CPU frequency scaling on ipq based +# devices. +# +# Symbol: IPQ_APSS_PLL [=n] +# Type : tristate +# Defined at drivers/clk/qcom/Kconfig:101 +# Prompt: IPQ APSS PLL +# Depends on: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] +# Location: +# -> Device Drivers +# -> Common Clock Framework (COMMON_CLK [=y]) +# -> Support for Qualcomm's clock controllers (COMMON_CLK_QCOM [=y]) +# Selected by [n]: +# - IPQ_APSS_6018 [=n] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (QCOM_APCS_IPC [=m] || COMPILE_TEST [=n]) +# +# +# +# CONFIG_IPQ_APSS_PLL is not set diff --git a/configs/fedora/generic/arm/CONFIG_MFD_KHADAS_MCU b/configs/fedora/generic/arm/CONFIG_MFD_KHADAS_MCU new file mode 100644 index 000000000..029c8368c --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_MFD_KHADAS_MCU @@ -0,0 +1,29 @@ +# CONFIG_MFD_KHADAS_MCU: +# +# Support for the Khadas System control Microcontroller interface +# present on their VIM and Edge boards. +# +# This Microcontroller is present on the Khadas VIM1, VIM2, VIM3 and +# Edge boards. +# +# It provides multiple boot control features like password check, +# power-on options, power-off control and system FAN control on recent +# boards. +# +# This driver provides common support for accessing the device, +# additional drivers must be enabled in order to use the functionality +# of the device. +# +# Symbol: MFD_KHADAS_MCU [=n] +# Type : tristate +# Defined at drivers/mfd/Kconfig:2044 +# Prompt: Support for Khadas System control Microcontroller +# Depends on: HAS_IOMEM [=y] && I2C [=y] && (ARCH_MESON [=y] || ARCH_ROCKCHIP [=y] || COMPILE_TEST [=n]) +# Location: +# -> Device Drivers +# -> Multifunction device drivers +# Selects: MFD_CORE [=y] && REGMAP_I2C [=y] +# +# +# +# CONFIG_MFD_KHADAS_MCU is not set diff --git a/configs/fedora/generic/arm/CONFIG_NVME_TARGET_PASSTHRU b/configs/fedora/generic/arm/CONFIG_NVME_TARGET_PASSTHRU new file mode 100644 index 000000000..3937aee43 --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_NVME_TARGET_PASSTHRU @@ -0,0 +1,22 @@ +# CONFIG_NVME_TARGET_PASSTHRU: +# +# This enables target side NVMe passthru controller support for the +# NVMe Over Fabrics protocol. It allows for hosts to manage and +# directly access an actual NVMe controller residing on the target +# side, incuding executing Vendor Unique Commands. +# +# If unsure, say N. +# +# Symbol: NVME_TARGET_PASSTHRU [=n] +# Type : bool +# Defined at drivers/nvme/target/Kconfig:19 +# Prompt: NVMe Target Passthrough support +# Depends on: NVME_TARGET [=m] && (NVME_CORE [=m]=y || NVME_CORE [=m]=NVME_TARGET [=m]) +# Location: +# -> Device Drivers +# -> NVME Support +# -> NVMe Target support (NVME_TARGET [=m]) +# +# +# +CONFIG_NVME_TARGET_PASSTHRU=y diff --git a/configs/fedora/generic/arm/CONFIG_PHY_QCOM_IPQ806X_USB b/configs/fedora/generic/arm/CONFIG_PHY_QCOM_IPQ806X_USB new file mode 100644 index 000000000..b71da31e3 --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_PHY_QCOM_IPQ806X_USB @@ -0,0 +1,19 @@ +# CONFIG_PHY_QCOM_IPQ806X_USB: +# +# This option enables support for the Synopsis PHYs present inside the +# Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports +# both HS and SS PHY controllers. +# +# Symbol: PHY_QCOM_IPQ806X_USB [=n] +# Type : tristate +# Defined at drivers/phy/qualcomm/Kconfig:108 +# Prompt: Qualcomm IPQ806x DWC3 USB PHY driver +# Depends on: HAS_IOMEM [=y] && OF [=y] && (ARCH_QCOM [=y] || COMPILE_TEST [=n]) +# Location: +# -> Device Drivers +# -> PHY Subsystem +# Selects: GENERIC_PHY [=y] +# +# +# +# CONFIG_PHY_QCOM_IPQ806X_USB is not set diff --git a/configs/fedora/generic/arm/CONFIG_PHY_QCOM_UFS b/configs/fedora/generic/arm/CONFIG_PHY_QCOM_UFS deleted file mode 100644 index 936bcab6c..000000000 --- a/configs/fedora/generic/arm/CONFIG_PHY_QCOM_UFS +++ /dev/null @@ -1 +0,0 @@ -CONFIG_PHY_QCOM_UFS=m diff --git a/configs/fedora/generic/arm/CONFIG_PHY_QCOM_UFS_14NM b/configs/fedora/generic/arm/CONFIG_PHY_QCOM_UFS_14NM deleted file mode 100644 index e858b3441..000000000 --- a/configs/fedora/generic/arm/CONFIG_PHY_QCOM_UFS_14NM +++ /dev/null @@ -1 +0,0 @@ -CONFIG_PHY_QCOM_UFS_14NM=m diff --git a/configs/fedora/generic/arm/CONFIG_PHY_SAMSUNG_UFS b/configs/fedora/generic/arm/CONFIG_PHY_SAMSUNG_UFS new file mode 100644 index 000000000..a75a01efb --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_PHY_SAMSUNG_UFS @@ -0,0 +1,21 @@ +# CONFIG_PHY_SAMSUNG_UFS: +# +# Enable this to support the Samsung UFS PHY driver for +# Samsung SoCs. This driver provides the interface for UFS +# host controller to do PHY related programming. +# +# Symbol: PHY_SAMSUNG_UFS [=n] +# Type : tristate +# Defined at drivers/phy/samsung/Kconfig:32 +# Prompt: SAMSUNG SoC series UFS PHY driver +# Depends on: OF [=y] && (ARCH_EXYNOS [=y] || COMPILE_TEST [=n]) +# Location: +# -> Device Drivers +# -> PHY Subsystem +# Selects: GENERIC_PHY [=y] +# Selected by [n]: +# - SCSI_UFS_EXYNOS [=n] && SCSI_LOWLEVEL [=y] && SCSI [=y] && SCSI_UFSHCD_PLATFORM [=m] && (ARCH_EXYNOS [=y] || COMPILE_TEST [=n]) +# +# +# +CONFIG_PHY_SAMSUNG_UFS=m diff --git a/configs/fedora/generic/arm/CONFIG_PHY_XILINX_ZYNQMP b/configs/fedora/generic/arm/CONFIG_PHY_XILINX_ZYNQMP new file mode 100644 index 000000000..6b1bf3ffe --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_PHY_XILINX_ZYNQMP @@ -0,0 +1,18 @@ +# CONFIG_PHY_XILINX_ZYNQMP: +# +# Enable this to support ZynqMP High Speed Gigabit Transceiver +# that is part of ZynqMP SoC. +# +# Symbol: PHY_XILINX_ZYNQMP [=n] +# Type : tristate +# Defined at drivers/phy/xilinx/Kconfig:7 +# Prompt: Xilinx ZynqMP PHY driver +# Depends on: ARCH_ZYNQMP [=y] || COMPILE_TEST [=n] +# Location: +# -> Device Drivers +# -> PHY Subsystem +# Selects: GENERIC_PHY [=y] +# +# +# +# CONFIG_PHY_XILINX_ZYNQMP is not set diff --git a/configs/fedora/generic/arm/CONFIG_QCOM_CLK_APCC_MSM8996 b/configs/fedora/generic/arm/CONFIG_QCOM_CLK_APCC_MSM8996 new file mode 100644 index 000000000..03927bd10 --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_QCOM_CLK_APCC_MSM8996 @@ -0,0 +1,20 @@ +# CONFIG_QCOM_CLK_APCC_MSM8996: +# +# Support for the CPU clock controller on msm8996 devices. +# Say Y if you want to support CPU clock scaling using CPUfreq +# drivers for dyanmic power management. +# +# Symbol: QCOM_CLK_APCC_MSM8996 [=n] +# Type : tristate +# Defined at drivers/clk/qcom/Kconfig:40 +# Prompt: MSM8996 CPU Clock Controller +# Depends on: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && ARM64 [=y] +# Location: +# -> Device Drivers +# -> Common Clock Framework (COMMON_CLK [=y]) +# -> Support for Qualcomm's clock controllers (COMMON_CLK_QCOM [=y]) +# Selects: QCOM_KRYO_L2_ACCESSORS [=y] +# +# +# +# CONFIG_QCOM_CLK_APCC_MSM8996 is not set diff --git a/configs/fedora/generic/arm/CONFIG_QCOM_RPMH b/configs/fedora/generic/arm/CONFIG_QCOM_RPMH new file mode 100644 index 000000000..f4736e823 --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_QCOM_RPMH @@ -0,0 +1 @@ +# CONFIG_QCOM_RPMH is not set diff --git a/configs/fedora/generic/arm/CONFIG_REGULATOR_CROS_EC b/configs/fedora/generic/arm/CONFIG_REGULATOR_CROS_EC new file mode 100644 index 000000000..4797223e2 --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_REGULATOR_CROS_EC @@ -0,0 +1 @@ +CONFIG_REGULATOR_CROS_EC=m diff --git a/configs/fedora/generic/arm/CONFIG_REGULATOR_SY8827N b/configs/fedora/generic/arm/CONFIG_REGULATOR_SY8827N new file mode 100644 index 000000000..c5219f00c --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_REGULATOR_SY8827N @@ -0,0 +1 @@ +CONFIG_REGULATOR_SY8827N=m diff --git a/configs/fedora/generic/arm/CONFIG_SCSI_UFS_EXYNOS b/configs/fedora/generic/arm/CONFIG_SCSI_UFS_EXYNOS new file mode 100644 index 000000000..d87acf266 --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_SCSI_UFS_EXYNOS @@ -0,0 +1,23 @@ +# CONFIG_SCSI_UFS_EXYNOS: +# +# This selects the EXYNOS specific additions to UFSHCD platform driver. +# UFS host on EXYNOS includes HCI and UNIPRO layer, and associates with +# UFS-PHY driver. +# +# Select this if you have UFS host controller on EXYNOS chipset. +# If unsure, say N. +# +# Symbol: SCSI_UFS_EXYNOS [=n] +# Type : tristate +# Defined at drivers/scsi/ufs/Kconfig:165 +# Prompt: EXYNOS specific hooks to UFS controller platform driver +# Depends on: SCSI_LOWLEVEL [=y] && SCSI [=y] && SCSI_UFSHCD_PLATFORM [=m] && (ARCH_EXYNOS [=y] || COMPILE_TEST [=n]) +# Location: +# -> Device Drivers +# -> SCSI device support +# -> SCSI low-level drivers (SCSI_LOWLEVEL [=y]) +# Selects: PHY_SAMSUNG_UFS [=n] +# +# +# +# CONFIG_SCSI_UFS_EXYNOS is not set diff --git a/configs/fedora/generic/arm/CONFIG_SC_GCC_7180 b/configs/fedora/generic/arm/CONFIG_SC_GCC_7180 index 7e78cbfb2..1ca9fc323 100644 --- a/configs/fedora/generic/arm/CONFIG_SC_GCC_7180 +++ b/configs/fedora/generic/arm/CONFIG_SC_GCC_7180 @@ -1 +1 @@ -# CONFIG_SC_GCC_7180 is not set +CONFIG_SC_GCC_7180=m diff --git a/configs/fedora/generic/arm/CONFIG_SERIAL_IMX_EARLYCON b/configs/fedora/generic/arm/CONFIG_SERIAL_IMX_EARLYCON new file mode 100644 index 000000000..f8065a94e --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_SERIAL_IMX_EARLYCON @@ -0,0 +1,20 @@ +# CONFIG_SERIAL_IMX_EARLYCON: +# +# If you have enabled the earlycon on the Freescale IMX +# CPU you can make it the earlycon by answering Y to this option. +# +# Symbol: SERIAL_IMX_EARLYCON [=n] +# Type : bool +# Defined at drivers/tty/serial/Kconfig:518 +# Prompt: Earlycon on IMX serial port +# Depends on: TTY [=y] && HAS_IOMEM [=y] && OF [=y] +# Location: +# -> Device Drivers +# -> Character devices +# -> Enable TTY (TTY [=y]) +# -> Serial drivers +# Selects: SERIAL_EARLYCON [=y] +# +# +# +# CONFIG_SERIAL_IMX_EARLYCON is not set diff --git a/configs/fedora/generic/arm/CONFIG_SM_GPUCC_8150 b/configs/fedora/generic/arm/CONFIG_SM_GPUCC_8150 new file mode 100644 index 000000000..672bdf84d --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_SM_GPUCC_8150 @@ -0,0 +1,20 @@ +# CONFIG_SM_GPUCC_8150: +# +# Support for the graphics clock controller on SM8150 devices. +# Say Y if you want to support graphics controller devices and +# functionality such as 3D graphics. +# +# Symbol: SM_GPUCC_8150 [=n] +# Type : tristate +# Defined at drivers/clk/qcom/Kconfig:431 +# Prompt: SM8150 Graphics Clock Controller +# Depends on: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] +# Location: +# -> Device Drivers +# -> Common Clock Framework (COMMON_CLK [=y]) +# -> Support for Qualcomm's clock controllers (COMMON_CLK_QCOM [=y]) +# Selects: SM_GCC_8150 [=n] +# +# +# +# CONFIG_SM_GPUCC_8150 is not set diff --git a/configs/fedora/generic/arm/CONFIG_SM_GPUCC_8250 b/configs/fedora/generic/arm/CONFIG_SM_GPUCC_8250 new file mode 100644 index 000000000..72464b6f8 --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_SM_GPUCC_8250 @@ -0,0 +1,20 @@ +# CONFIG_SM_GPUCC_8250: +# +# Support for the graphics clock controller on SM8250 devices. +# Say Y if you want to support graphics controller devices and +# functionality such as 3D graphics. +# +# Symbol: SM_GPUCC_8250 [=n] +# Type : tristate +# Defined at drivers/clk/qcom/Kconfig:439 +# Prompt: SM8250 Graphics Clock Controller +# Depends on: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] +# Location: +# -> Device Drivers +# -> Common Clock Framework (COMMON_CLK [=y]) +# -> Support for Qualcomm's clock controllers (COMMON_CLK_QCOM [=y]) +# Selects: SM_GCC_8250 [=m] +# +# +# +# CONFIG_SM_GPUCC_8250 is not set diff --git a/configs/fedora/generic/arm/CONFIG_SND_SOC_TEGRA b/configs/fedora/generic/arm/CONFIG_SND_SOC_TEGRA new file mode 100644 index 000000000..b32a04ff3 --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_SND_SOC_TEGRA @@ -0,0 +1 @@ +CONFIG_SND_SOC_TEGRA=m diff --git a/configs/fedora/generic/arm/CONFIG_SND_SOC_TEGRA186_DSPK b/configs/fedora/generic/arm/CONFIG_SND_SOC_TEGRA186_DSPK new file mode 100644 index 000000000..6d366f70d --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_SND_SOC_TEGRA186_DSPK @@ -0,0 +1,26 @@ +# CONFIG_SND_SOC_TEGRA186_DSPK: +# +# Config to enable the Digital Speaker Controller (DSPK) which +# converts the multi-bit Pulse Code Modulation (PCM) audio input to +# oversampled 1-bit Pulse Density Modulation (PDM) output. From the +# signal flow perspective DSPK can be viewed as a PDM transmitter +# that up-samples the input to the desired sampling rate by +# interpolation and then converts the oversampled PCM input to +# the desired 1-bit output via Delta Sigma Modulation (DSM). +# Say Y or M if you want to add support for Tegra186 DSPK module. +# +# Symbol: SND_SOC_TEGRA186_DSPK [=n] +# Type : tristate +# Defined at sound/soc/tegra/Kconfig:96 +# Prompt: Tegra186 DSPK module +# Depends on: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_SOC_TEGRA [=m] +# Location: +# -> Device Drivers +# -> Sound card support (SOUND [=m]) +# -> Advanced Linux Sound Architecture (SND [=m]) +# -> ALSA for SoC audio support (SND_SOC [=m]) +# -> SoC Audio for the Tegra System-on-Chip (SND_SOC_TEGRA [=m]) +# +# +# +# CONFIG_SND_SOC_TEGRA186_DSPK is not set diff --git a/configs/fedora/generic/arm/CONFIG_SND_SOC_TEGRA210_ADMAIF b/configs/fedora/generic/arm/CONFIG_SND_SOC_TEGRA210_ADMAIF new file mode 100644 index 000000000..9d9c56d7d --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_SND_SOC_TEGRA210_ADMAIF @@ -0,0 +1,25 @@ +# CONFIG_SND_SOC_TEGRA210_ADMAIF: +# +# Config to enable ADMAIF which is the interface between ADMA and +# Audio Hub (AHUB). Each ADMA channel that sends/receives data to/ +# from AHUB must interface through an ADMAIF channel. ADMA channel +# sending data to AHUB pairs with an ADMAIF Tx channel, where as +# ADMA channel receiving data from AHUB pairs with an ADMAIF Rx +# channel. Buffer size is configurable for each ADMAIIF channel. +# Say Y or M if you want to add support for Tegra210 ADMAIF module. +# +# Symbol: SND_SOC_TEGRA210_ADMAIF [=n] +# Type : tristate +# Defined at sound/soc/tegra/Kconfig:109 +# Prompt: Tegra210 ADMAIF module +# Depends on: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_SOC_TEGRA [=m] +# Location: +# -> Device Drivers +# -> Sound card support (SOUND [=m]) +# -> Advanced Linux Sound Architecture (SND [=m]) +# -> ALSA for SoC audio support (SND_SOC [=m]) +# -> SoC Audio for the Tegra System-on-Chip (SND_SOC_TEGRA [=m]) +# +# +# +# CONFIG_SND_SOC_TEGRA210_ADMAIF is not set diff --git a/configs/fedora/generic/arm/CONFIG_SND_SOC_TEGRA210_AHUB b/configs/fedora/generic/arm/CONFIG_SND_SOC_TEGRA210_AHUB new file mode 100644 index 000000000..fb122445d --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_SND_SOC_TEGRA210_AHUB @@ -0,0 +1,23 @@ +# CONFIG_SND_SOC_TEGRA210_AHUB: +# +# Config to enable Audio Hub (AHUB) module, which comprises of a +# switch called Audio Crossbar (AXBAR) used to configure or modify +# the audio routing path between various HW accelerators present in +# AHUB. +# Say Y or M if you want to add support for Tegra210 AHUB module. +# +# Symbol: SND_SOC_TEGRA210_AHUB [=n] +# Type : tristate +# Defined at sound/soc/tegra/Kconfig:65 +# Prompt: Tegra210 AHUB module +# Depends on: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_SOC_TEGRA [=m] +# Location: +# -> Device Drivers +# -> Sound card support (SOUND [=m]) +# -> Advanced Linux Sound Architecture (SND [=m]) +# -> ALSA for SoC audio support (SND_SOC [=m]) +# -> SoC Audio for the Tegra System-on-Chip (SND_SOC_TEGRA [=m]) +# +# +# +# CONFIG_SND_SOC_TEGRA210_AHUB is not set diff --git a/configs/fedora/generic/arm/CONFIG_SND_SOC_TEGRA210_DMIC b/configs/fedora/generic/arm/CONFIG_SND_SOC_TEGRA210_DMIC new file mode 100644 index 000000000..0c5357015 --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_SND_SOC_TEGRA210_DMIC @@ -0,0 +1,24 @@ +# CONFIG_SND_SOC_TEGRA210_DMIC: +# +# Config to enable the Digital MIC (DMIC) controller which is used +# to interface with Pulse Density Modulation (PDM) input devices. +# The DMIC controller implements a converter to convert PDM signals +# to Pulse Code Modulation (PCM) signals. This can be viewed as a +# PDM receiver. +# Say Y or M if you want to add support for Tegra210 DMIC module. +# +# Symbol: SND_SOC_TEGRA210_DMIC [=n] +# Type : tristate +# Defined at sound/soc/tegra/Kconfig:75 +# Prompt: Tegra210 DMIC module +# Depends on: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_SOC_TEGRA [=m] +# Location: +# -> Device Drivers +# -> Sound card support (SOUND [=m]) +# -> Advanced Linux Sound Architecture (SND [=m]) +# -> ALSA for SoC audio support (SND_SOC [=m]) +# -> SoC Audio for the Tegra System-on-Chip (SND_SOC_TEGRA [=m]) +# +# +# +# CONFIG_SND_SOC_TEGRA210_DMIC is not set diff --git a/configs/fedora/generic/arm/CONFIG_STM32_FMC2_EBI b/configs/fedora/generic/arm/CONFIG_STM32_FMC2_EBI new file mode 100644 index 000000000..db6e788cf --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_STM32_FMC2_EBI @@ -0,0 +1,20 @@ +# CONFIG_STM32_FMC2_EBI: +# +# Select this option to enable the STM32 FMC2 External Bus Interface +# controller. This driver configures the transactions with external +# devices (like SRAM, ethernet adapters, FPGAs, LCD displays, ...) on +# SOCs containing the FMC2 External Bus Interface. +# +# Symbol: STM32_FMC2_EBI [=n] +# Type : tristate +# Defined at drivers/memory/Kconfig:191 +# Prompt: Support for FMC2 External Bus Interface on STM32MP SoCs +# Depends on: MEMORY [=y] && (MACH_STM32MP157 [=y] || COMPILE_TEST [=n]) +# Location: +# -> Device Drivers +# -> Memory Controller drivers (MEMORY [=y]) +# Selects: MFD_SYSCON [=y] +# +# +# +# CONFIG_STM32_FMC2_EBI is not set diff --git a/configs/fedora/generic/arm/CONFIG_USB_OTG_BLACKLIST_HUB b/configs/fedora/generic/arm/CONFIG_USB_OTG_BLACKLIST_HUB deleted file mode 100644 index 461a020a8..000000000 --- a/configs/fedora/generic/arm/CONFIG_USB_OTG_BLACKLIST_HUB +++ /dev/null @@ -1 +0,0 @@ -# CONFIG_USB_OTG_BLACKLIST_HUB is not set diff --git a/configs/fedora/generic/arm/CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB b/configs/fedora/generic/arm/CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB new file mode 100644 index 000000000..2aa6c9392 --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB @@ -0,0 +1 @@ +# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set diff --git a/configs/fedora/generic/arm/CONFIG_XILINX_ZYNQMP_DPDMA b/configs/fedora/generic/arm/CONFIG_XILINX_ZYNQMP_DPDMA new file mode 100644 index 000000000..58298f242 --- /dev/null +++ b/configs/fedora/generic/arm/CONFIG_XILINX_ZYNQMP_DPDMA @@ -0,0 +1 @@ +CONFIG_XILINX_ZYNQMP_DPDMA=m diff --git a/configs/fedora/generic/arm/aarch64/CONFIG_ARM64_TLB_RANGE b/configs/fedora/generic/arm/aarch64/CONFIG_ARM64_TLB_RANGE new file mode 100644 index 000000000..b34bf805a --- /dev/null +++ b/configs/fedora/generic/arm/aarch64/CONFIG_ARM64_TLB_RANGE @@ -0,0 +1 @@ +CONFIG_ARM64_TLB_RANGE=y diff --git a/configs/fedora/generic/arm/aarch64/CONFIG_ARM_TEGRA194_CPUFREQ b/configs/fedora/generic/arm/aarch64/CONFIG_ARM_TEGRA194_CPUFREQ new file mode 100644 index 000000000..bb9dfae55 --- /dev/null +++ b/configs/fedora/generic/arm/aarch64/CONFIG_ARM_TEGRA194_CPUFREQ @@ -0,0 +1 @@ +CONFIG_ARM_TEGRA194_CPUFREQ=m diff --git a/configs/fedora/generic/arm/aarch64/CONFIG_BATTERY_CW2015 b/configs/fedora/generic/arm/aarch64/CONFIG_BATTERY_CW2015 new file mode 100644 index 000000000..5ad6cdbb1 --- /dev/null +++ b/configs/fedora/generic/arm/aarch64/CONFIG_BATTERY_CW2015 @@ -0,0 +1 @@ +CONFIG_BATTERY_CW2015=m diff --git a/configs/fedora/generic/arm/aarch64/CONFIG_IMX_SCU_SOC b/configs/fedora/generic/arm/aarch64/CONFIG_IMX_SCU_SOC deleted file mode 100644 index 57c96444a..000000000 --- a/configs/fedora/generic/arm/aarch64/CONFIG_IMX_SCU_SOC +++ /dev/null @@ -1 +0,0 @@ -CONFIG_IMX_SCU_SOC=y diff --git a/configs/fedora/generic/arm/aarch64/CONFIG_PHY_XILINX_ZYNQMP b/configs/fedora/generic/arm/aarch64/CONFIG_PHY_XILINX_ZYNQMP new file mode 100644 index 000000000..a8272d607 --- /dev/null +++ b/configs/fedora/generic/arm/aarch64/CONFIG_PHY_XILINX_ZYNQMP @@ -0,0 +1 @@ +CONFIG_PHY_XILINX_ZYNQMP=m diff --git a/configs/fedora/generic/arm/aarch64/CONFIG_REGULATOR_PCA9450 b/configs/fedora/generic/arm/aarch64/CONFIG_REGULATOR_PCA9450 new file mode 100644 index 000000000..af74d3b08 --- /dev/null +++ b/configs/fedora/generic/arm/aarch64/CONFIG_REGULATOR_PCA9450 @@ -0,0 +1 @@ +CONFIG_REGULATOR_PCA9450=m diff --git a/configs/fedora/generic/arm/aarch64/CONFIG_REGULATOR_QCOM_LABIBB b/configs/fedora/generic/arm/aarch64/CONFIG_REGULATOR_QCOM_LABIBB new file mode 100644 index 000000000..9aacaee2a --- /dev/null +++ b/configs/fedora/generic/arm/aarch64/CONFIG_REGULATOR_QCOM_LABIBB @@ -0,0 +1 @@ +CONFIG_REGULATOR_QCOM_LABIBB=m diff --git a/configs/fedora/generic/arm/aarch64/CONFIG_REGULATOR_QCOM_USB_VBUS b/configs/fedora/generic/arm/aarch64/CONFIG_REGULATOR_QCOM_USB_VBUS new file mode 100644 index 000000000..2ca7ff2e6 --- /dev/null +++ b/configs/fedora/generic/arm/aarch64/CONFIG_REGULATOR_QCOM_USB_VBUS @@ -0,0 +1 @@ +CONFIG_REGULATOR_QCOM_USB_VBUS=m diff --git a/configs/fedora/generic/arm/aarch64/CONFIG_SND_SOC_SOF_IMX8M_SUPPORT b/configs/fedora/generic/arm/aarch64/CONFIG_SND_SOC_SOF_IMX8M_SUPPORT index 25d50cc9e..84a67d545 100644 --- a/configs/fedora/generic/arm/aarch64/CONFIG_SND_SOC_SOF_IMX8M_SUPPORT +++ b/configs/fedora/generic/arm/aarch64/CONFIG_SND_SOC_SOF_IMX8M_SUPPORT @@ -1,22 +1 @@ -# CONFIG_SND_SOC_SOF_IMX8M_SUPPORT: -# -# This adds support for Sound Open Firmware for NXP i.MX8M platforms -# Say Y if you have such a device. -# If unsure select "N". -# -# Symbol: SND_SOC_SOF_IMX8M_SUPPORT [=n] -# Type : bool -# Defined at sound/soc/sof/imx/Kconfig:37 -# Prompt: SOF support for i.MX8M -# Depends on: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_SOC_SOF_TOPLEVEL [=y] && SND_SOC_SOF_IMX_TOPLEVEL [=y] && (IMX_DSP [=m]=y || IMX_DSP [=m]=SND_SOC_SOF_OF [=m]) -# Location: -# -> Device Drivers -# -> Sound card support (SOUND [=m]) -# -> Advanced Linux Sound Architecture (SND [=m]) -# -> ALSA for SoC audio support (SND_SOC [=m]) -# -> Sound Open Firmware Support (SND_SOC_SOF_TOPLEVEL [=y]) -# -> SOF support for NXP i.MX audio DSPs (SND_SOC_SOF_IMX_TOPLEVEL [=y]) -# -# -# CONFIG_SND_SOC_SOF_IMX8M_SUPPORT=y diff --git a/configs/fedora/generic/arm/aarch64/CONFIG_SND_SOC_TEGRA186_DSPK b/configs/fedora/generic/arm/aarch64/CONFIG_SND_SOC_TEGRA186_DSPK new file mode 100644 index 000000000..69ecdcace --- /dev/null +++ b/configs/fedora/generic/arm/aarch64/CONFIG_SND_SOC_TEGRA186_DSPK @@ -0,0 +1 @@ +CONFIG_SND_SOC_TEGRA186_DSPK=m diff --git a/configs/fedora/generic/arm/aarch64/CONFIG_SND_SOC_TEGRA210_ADMAIF b/configs/fedora/generic/arm/aarch64/CONFIG_SND_SOC_TEGRA210_ADMAIF new file mode 100644 index 000000000..48ff685ba --- /dev/null +++ b/configs/fedora/generic/arm/aarch64/CONFIG_SND_SOC_TEGRA210_ADMAIF @@ -0,0 +1 @@ +CONFIG_SND_SOC_TEGRA210_ADMAIF=m diff --git a/configs/fedora/generic/arm/aarch64/CONFIG_SND_SOC_TEGRA210_AHUB b/configs/fedora/generic/arm/aarch64/CONFIG_SND_SOC_TEGRA210_AHUB new file mode 100644 index 000000000..df9cb331c --- /dev/null +++ b/configs/fedora/generic/arm/aarch64/CONFIG_SND_SOC_TEGRA210_AHUB @@ -0,0 +1 @@ +CONFIG_SND_SOC_TEGRA210_AHUB=m diff --git a/configs/fedora/generic/arm/aarch64/CONFIG_SND_SOC_TEGRA210_DMIC b/configs/fedora/generic/arm/aarch64/CONFIG_SND_SOC_TEGRA210_DMIC new file mode 100644 index 000000000..7ee30a773 --- /dev/null +++ b/configs/fedora/generic/arm/aarch64/CONFIG_SND_SOC_TEGRA210_DMIC @@ -0,0 +1 @@ +CONFIG_SND_SOC_TEGRA210_DMIC=m diff --git a/configs/fedora/generic/arm/aarch64/CONFIG_SND_SOC_TEGRA210_I2S b/configs/fedora/generic/arm/aarch64/CONFIG_SND_SOC_TEGRA210_I2S new file mode 100644 index 000000000..43dae56b7 --- /dev/null +++ b/configs/fedora/generic/arm/aarch64/CONFIG_SND_SOC_TEGRA210_I2S @@ -0,0 +1 @@ +CONFIG_SND_SOC_TEGRA210_I2S=m diff --git a/configs/fedora/generic/arm/aarch64/CONFIG_TEGRA210_EMC b/configs/fedora/generic/arm/aarch64/CONFIG_TEGRA210_EMC new file mode 100644 index 000000000..7f909626e --- /dev/null +++ b/configs/fedora/generic/arm/aarch64/CONFIG_TEGRA210_EMC @@ -0,0 +1 @@ +CONFIG_TEGRA210_EMC=m diff --git a/configs/fedora/generic/arm/aarch64/CONFIG_TEGRA210_EMC_TABLE b/configs/fedora/generic/arm/aarch64/CONFIG_TEGRA210_EMC_TABLE new file mode 100644 index 000000000..3e6e18498 --- /dev/null +++ b/configs/fedora/generic/arm/aarch64/CONFIG_TEGRA210_EMC_TABLE @@ -0,0 +1 @@ +CONFIG_TEGRA210_EMC_TABLE=y diff --git a/configs/fedora/generic/arm/armv7/CONFIG_LEDS_TURRIS_OMNIA b/configs/fedora/generic/arm/armv7/CONFIG_LEDS_TURRIS_OMNIA new file mode 100644 index 000000000..749bf4f99 --- /dev/null +++ b/configs/fedora/generic/arm/armv7/CONFIG_LEDS_TURRIS_OMNIA @@ -0,0 +1 @@ +CONFIG_LEDS_TURRIS_OMNIA=m diff --git a/configs/fedora/generic/arm/armv7/armv7/CONFIG_REGULATOR_QCOM_LABIBB b/configs/fedora/generic/arm/armv7/armv7/CONFIG_REGULATOR_QCOM_LABIBB new file mode 100644 index 000000000..9aacaee2a --- /dev/null +++ b/configs/fedora/generic/arm/armv7/armv7/CONFIG_REGULATOR_QCOM_LABIBB @@ -0,0 +1 @@ +CONFIG_REGULATOR_QCOM_LABIBB=m diff --git a/configs/fedora/generic/arm/armv7/armv7/CONFIG_REGULATOR_QCOM_USB_VBUS b/configs/fedora/generic/arm/armv7/armv7/CONFIG_REGULATOR_QCOM_USB_VBUS new file mode 100644 index 000000000..2ca7ff2e6 --- /dev/null +++ b/configs/fedora/generic/arm/armv7/armv7/CONFIG_REGULATOR_QCOM_USB_VBUS @@ -0,0 +1 @@ +CONFIG_REGULATOR_QCOM_USB_VBUS=m diff --git a/configs/fedora/generic/arm/armv7/armv7/CONFIG_SND_SOC_CS42XX8_I2C b/configs/fedora/generic/arm/armv7/armv7/CONFIG_SND_SOC_CS42XX8_I2C deleted file mode 100644 index f5db15237..000000000 --- a/configs/fedora/generic/arm/armv7/armv7/CONFIG_SND_SOC_CS42XX8_I2C +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SND_SOC_CS42XX8_I2C=m diff --git a/configs/fedora/generic/powerpc/CONFIG_FB_MODE_HELPERS b/configs/fedora/generic/powerpc/CONFIG_FB_MODE_HELPERS new file mode 100644 index 000000000..84f515748 --- /dev/null +++ b/configs/fedora/generic/powerpc/CONFIG_FB_MODE_HELPERS @@ -0,0 +1 @@ +CONFIG_FB_MODE_HELPERS=y diff --git a/configs/fedora/generic/powerpc/CONFIG_PPC_PROT_SAO_LPAR b/configs/fedora/generic/powerpc/CONFIG_PPC_PROT_SAO_LPAR new file mode 100644 index 000000000..88471b97e --- /dev/null +++ b/configs/fedora/generic/powerpc/CONFIG_PPC_PROT_SAO_LPAR @@ -0,0 +1,21 @@ +# CONFIG_PPC_PROT_SAO_LPAR: +# +# This option adds support for PROT_SAO mappings from userspace +# inside LPARs on supported CPUs. +# +# This may cause issues when performing guest migration from +# a CPU that supports SAO to one that does not. +# +# If unsure, say N here. +# +# Symbol: PPC_PROT_SAO_LPAR [=n] +# Type : bool +# Defined at arch/powerpc/Kconfig:863 +# Prompt: Support PROT_SAO mappings in LPARs +# Depends on: PPC_BOOK3S_64 [=y] +# Location: +# -> Kernel options +# +# +# +# CONFIG_PPC_PROT_SAO_LPAR is not set diff --git a/configs/fedora/generic/powerpc/CONFIG_PPC_QUEUED_SPINLOCKS b/configs/fedora/generic/powerpc/CONFIG_PPC_QUEUED_SPINLOCKS new file mode 100644 index 000000000..90ecdc77e --- /dev/null +++ b/configs/fedora/generic/powerpc/CONFIG_PPC_QUEUED_SPINLOCKS @@ -0,0 +1,22 @@ +# CONFIG_PPC_QUEUED_SPINLOCKS: +# +# Say Y here to use queued spinlocks which give better scalability and +# fairness on large SMP and NUMA systems without harming single threaded +# performance. +# +# This option is currently experimental, the code is more complex and +# less tested so it defaults to "N" for the moment. +# +# If unsure, say "N". +# +# Symbol: PPC_QUEUED_SPINLOCKS [=n] +# Type : bool +# Defined at arch/powerpc/Kconfig:497 +# Prompt: Queued spinlocks +# Depends on: SMP [=y] +# Location: +# -> Kernel options +# +# +# +# CONFIG_PPC_QUEUED_SPINLOCKS is not set diff --git a/configs/fedora/generic/powerpc/CONFIG_PPC_RTAS_FILTER b/configs/fedora/generic/powerpc/CONFIG_PPC_RTAS_FILTER new file mode 100644 index 000000000..7470f4d4f --- /dev/null +++ b/configs/fedora/generic/powerpc/CONFIG_PPC_RTAS_FILTER @@ -0,0 +1 @@ +CONFIG_PPC_RTAS_FILTER=y diff --git a/configs/fedora/generic/s390x/CONFIG_PROTECTED_VIRTUALIZATION_GUEST b/configs/fedora/generic/s390x/CONFIG_PROTECTED_VIRTUALIZATION_GUEST index 3b7418088..f87261115 100644 --- a/configs/fedora/generic/s390x/CONFIG_PROTECTED_VIRTUALIZATION_GUEST +++ b/configs/fedora/generic/s390x/CONFIG_PROTECTED_VIRTUALIZATION_GUEST @@ -1 +1 @@ -# CONFIG_PROTECTED_VIRTUALIZATION_GUEST is not set +CONFIG_PROTECTED_VIRTUALIZATION_GUEST=y diff --git a/configs/fedora/generic/s390x/README b/configs/fedora/generic/s390x/README index e69de29bb..5702afc31 100644 --- a/configs/fedora/generic/s390x/README +++ b/configs/fedora/generic/s390x/README @@ -0,0 +1,5 @@ +Place config options in this directory that you want applied to s390x +kernel variants. These options are overlayed atop the generic/ kernel +options, but can also be overridden config option files places in the +debug/ and/or debug/s390x directories, as well as by config option files +placed in generic/s390x/zfcpdump for the s390x-zfcpdump kernel variant. diff --git a/configs/fedora/generic/x86/CONFIG_INTEL_ATOMISP2_LED b/configs/fedora/generic/x86/CONFIG_INTEL_ATOMISP2_LED new file mode 100644 index 000000000..f57532969 --- /dev/null +++ b/configs/fedora/generic/x86/CONFIG_INTEL_ATOMISP2_LED @@ -0,0 +1 @@ +CONFIG_INTEL_ATOMISP2_LED=m diff --git a/configs/fedora/generic/x86/CONFIG_SERIAL_LANTIQ b/configs/fedora/generic/x86/CONFIG_SERIAL_LANTIQ deleted file mode 100644 index 9eabc27e1..000000000 --- a/configs/fedora/generic/x86/CONFIG_SERIAL_LANTIQ +++ /dev/null @@ -1,21 +0,0 @@ -# CONFIG_SERIAL_LANTIQ: -# -# Support for UART on Lantiq and Intel SoCs. -# To compile this driver as a module, select M here. The -# module will be called lantiq. -# -# Symbol: SERIAL_LANTIQ [=n] -# Type : tristate -# Defined at drivers/tty/serial/Kconfig:1036 -# Prompt: Lantiq serial driver -# Depends on: TTY [=y] && HAS_IOMEM [=y] && (LANTIQ || X86 [=y] || COMPILE_TEST [=n]) -# Location: -# -> Device Drivers -# -> Character devices -# -> Enable TTY (TTY [=y]) -# -> Serial drivers -# Selects: SERIAL_CORE [=y] -# -# -# -CONFIG_SERIAL_LANTIQ=m diff --git a/configs/fedora/generic/x86/x86_64/CONFIG_FB_MODE_HELPERS b/configs/fedora/generic/x86/x86_64/CONFIG_FB_MODE_HELPERS new file mode 100644 index 000000000..84f515748 --- /dev/null +++ b/configs/fedora/generic/x86/x86_64/CONFIG_FB_MODE_HELPERS @@ -0,0 +1 @@ +CONFIG_FB_MODE_HELPERS=y diff --git a/configs/fedora/generic/x86/x86_64/CONFIG_KERNEL_GZIP b/configs/fedora/generic/x86/x86_64/CONFIG_KERNEL_GZIP new file mode 100644 index 000000000..e6689c725 --- /dev/null +++ b/configs/fedora/generic/x86/x86_64/CONFIG_KERNEL_GZIP @@ -0,0 +1 @@ +# CONFIG_KERNEL_GZIP is not set diff --git a/configs/fedora/generic/x86/x86_64/CONFIG_KERNEL_ZSTD b/configs/fedora/generic/x86/x86_64/CONFIG_KERNEL_ZSTD new file mode 100644 index 000000000..dfaf8e6a9 --- /dev/null +++ b/configs/fedora/generic/x86/x86_64/CONFIG_KERNEL_ZSTD @@ -0,0 +1 @@ +CONFIG_KERNEL_ZSTD=y diff --git a/configs/fedora/generic/x86/x86_64/CONFIG_SND_SOC_MAX98373_SDW b/configs/fedora/generic/x86/x86_64/CONFIG_SND_SOC_MAX98373_SDW new file mode 100644 index 000000000..00f7663af --- /dev/null +++ b/configs/fedora/generic/x86/x86_64/CONFIG_SND_SOC_MAX98373_SDW @@ -0,0 +1 @@ +CONFIG_SND_SOC_MAX98373_SDW=m diff --git a/configs/fedora/generic/x86/x86_64/README b/configs/fedora/generic/x86/x86_64/README index e69de29bb..dccb4bc79 100644 --- a/configs/fedora/generic/x86/x86_64/README +++ b/configs/fedora/generic/x86/x86_64/README @@ -0,0 +1,4 @@ +Place config options in this directory that you want applied to x86_64 +kernel variants. These options are overlayed atop the generic/ kernel +options, but can also be overridden config option files places in the +debug/ and/or debug/x86_64 directories. |