diff options
Diffstat (limited to 'bcm283x-upstream-fixes.patch')
-rw-r--r-- | bcm283x-upstream-fixes.patch | 194 |
1 files changed, 0 insertions, 194 deletions
diff --git a/bcm283x-upstream-fixes.patch b/bcm283x-upstream-fixes.patch deleted file mode 100644 index c5ee31784..000000000 --- a/bcm283x-upstream-fixes.patch +++ /dev/null @@ -1,194 +0,0 @@ -From da77f737f9f5a487f3a1f80f8546585ee18cd7b9 Mon Sep 17 00:00:00 2001 -From: Eric Anholt <eric@anholt.net> -Date: Fri, 4 Mar 2016 10:39:28 -0800 -Subject: [PATCH 27/36] dt-bindings: Add root properties for Raspberry Pi 3 - -Signed-off-by: Eric Anholt <eric@anholt.net> -Acked-by: Rob Herring <robh@kernel.org> ---- - Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt -index 11d3056..6ffe087 100644 ---- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt -+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt -@@ -30,6 +30,10 @@ Raspberry Pi 2 Model B - Required root node properties: - compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; - -+Raspberry Pi 3 Model B -+Required root node properties: -+compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; -+ - Raspberry Pi Compute Module - Required root node properties: - compatible = "raspberrypi,compute-module", "brcm,bcm2835"; --- -2.7.3 - -From b76b1cdf2e569cceab41dcf3b3f6a90965d0a02c Mon Sep 17 00:00:00 2001 -From: Eric Anholt <eric@anholt.net> -Date: Fri, 4 Mar 2016 10:39:29 -0800 -Subject: [PATCH 28/36] ARM: bcm2835: Add devicetree for the Raspberry Pi 3. - -For now this doesn't support the new hardware present on the Pi 3 (BT, -wifi, GPIO expander). Since the GPIO expander isn't supported, we -also don't have the LEDs like the other board files do. - -Signed-off-by: Eric Anholt <eric@anholt.net> -Acked-by: Stephen Warren <swarren@wwwdotorg.org> ---- - arch/arm/boot/dts/Makefile | 3 +- - arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 22 ++++++++++++ - arch/arm/boot/dts/bcm2837.dtsi | 68 +++++++++++++++++++++++++++++++++++ - 3 files changed, 92 insertions(+), 1 deletion(-) - create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-b.dts - create mode 100644 arch/arm/boot/dts/bcm2837.dtsi - -diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile -index d000814..a8a0767 100644 ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -64,7 +64,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ - bcm2835-rpi-b-rev2.dtb \ - bcm2835-rpi-b-plus.dtb \ - bcm2835-rpi-a-plus.dtb \ -- bcm2836-rpi-2-b.dtb -+ bcm2836-rpi-2-b.dtb \ -+ bcm2837-rpi-3-b.dtb - dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm4708-asus-rt-ac56u.dtb \ - bcm4708-asus-rt-ac68u.dtb \ -diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts -new file mode 100644 -index 0000000..5e8eafd ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts -@@ -0,0 +1,22 @@ -+/dts-v1/; -+#include "bcm2837.dtsi" -+#include "bcm2835-rpi.dtsi" -+ -+/ { -+ compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; -+ model = "Raspberry Pi 3 Model B"; -+ -+ memory { -+ reg = <0 0x40000000>; -+ }; -+}; -+ -+&gpio { -+ pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>; -+ -+ /* I2S interface */ -+ i2s_alt0: i2s_alt0 { -+ brcm,pins = <28 29 30 31>; -+ brcm,function = <BCM2835_FSEL_ALT2>; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi -new file mode 100644 -index 0000000..2f36722 ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2837.dtsi -@@ -0,0 +1,68 @@ -+#include "bcm283x.dtsi" -+ -+/ { -+ compatible = "brcm,bcm2836"; -+ -+ soc { -+ ranges = <0x7e000000 0x3f000000 0x1000000>, -+ <0x40000000 0x40000000 0x00001000>; -+ dma-ranges = <0xc0000000 0x00000000 0x3f000000>; -+ -+ local_intc: local_intc { -+ compatible = "brcm,bcm2836-l1-intc"; -+ reg = <0x40000000 0x100>; -+ interrupt-controller; -+ #interrupt-cells = <1>; -+ interrupt-parent = <&local_intc>; -+ }; -+ }; -+ -+ timer { -+ compatible = "arm,armv7-timer"; -+ interrupt-parent = <&local_intc>; -+ interrupts = <0>, // PHYS_SECURE_PPI -+ <1>, // PHYS_NONSECURE_PPI -+ <3>, // VIRT_PPI -+ <2>; // HYP_PPI -+ always-on; -+ }; -+ -+ cpus: cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ cpu0: cpu@0 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a53"; -+ reg = <0>; -+ }; -+ -+ cpu1: cpu@1 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a53"; -+ reg = <1>; -+ }; -+ -+ cpu2: cpu@2 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a53"; -+ reg = <2>; -+ }; -+ -+ cpu3: cpu@3 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a53"; -+ reg = <3>; -+ }; -+ }; -+}; -+ -+/* Make the BCM2835-style global interrupt controller be a child of the -+ * CPU-local interrupt controller. -+ */ -+&intc { -+ compatible = "brcm,bcm2836-armctrl-ic"; -+ reg = <0x7e00b200 0x200>; -+ interrupt-parent = <&local_intc>; -+ interrupts = <8>; -+}; --- -2.7.3 - -From 528285e99c25249456023d28f521689bf9e9eb8b Mon Sep 17 00:00:00 2001 -From: Peter Robinson <pbrobinson@gmail.com> -Date: Wed, 30 Mar 2016 09:35:13 +0100 -Subject: [PATCH 32/36] drop usb power domain support for the moment, kills usb - ---- - arch/arm/boot/dts/bcm2835-rpi.dtsi | 4 ---- - 1 file changed, 4 deletions(-) - -diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi -index caf2707..b1e8145 100644 ---- a/arch/arm/boot/dts/bcm2835-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi -@@ -71,10 +71,6 @@ - status = "okay"; - }; - --&usb { -- power-domains = <&power RPI_POWER_DOMAIN_USB>; --}; -- - &v3d { - power-domains = <&power RPI_POWER_DOMAIN_V3D>; - }; --- -2.7.3 - |