summaryrefslogtreecommitdiffstats
path: root/bcm2837-lan78xx-fixes.patch
diff options
context:
space:
mode:
Diffstat (limited to 'bcm2837-lan78xx-fixes.patch')
-rw-r--r--bcm2837-lan78xx-fixes.patch364
1 files changed, 0 insertions, 364 deletions
diff --git a/bcm2837-lan78xx-fixes.patch b/bcm2837-lan78xx-fixes.patch
index e8ac07b92..6d70cd36e 100644
--- a/bcm2837-lan78xx-fixes.patch
+++ b/bcm2837-lan78xx-fixes.patch
@@ -86,367 +86,3 @@ index 5b46998a6dce..6b61bb21f2ae 100644
--
2.17.0
-From 7528d39c5d01383fadb17a84b9840f9f685d1e0b Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Thu, 19 Apr 2018 17:59:38 +0100
-Subject: [PATCH 7/9] lan78xx: Read MAC address from DT if present
-
-There is a standard mechanism for locating and using a MAC address from
-the Device Tree. Use this facility in the lan78xx driver to support
-applications without programmed EEPROM or OTP. At the same time,
-regularise the handling of the different address sources.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- drivers/net/usb/lan78xx.c | 42 +++++++++++++++++++--------------------
- 1 file changed, 20 insertions(+), 22 deletions(-)
-
-diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
-index 6b61bb21f2ae..6c38a74bb32d 100644
---- a/drivers/net/usb/lan78xx.c
-+++ b/drivers/net/usb/lan78xx.c
-@@ -37,6 +37,7 @@
- #include <linux/irqchip/chained_irq.h>
- #include <linux/microchipphy.h>
- #include <linux/phy.h>
-+#include <linux/of_net.h>
- #include "lan78xx.h"
-
- #define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@microchip.com>"
-@@ -1652,34 +1653,31 @@ static void lan78xx_init_mac_address(struct lan78xx_net *dev)
- addr[5] = (addr_hi >> 8) & 0xFF;
-
- if (!is_valid_ether_addr(addr)) {
-- /* reading mac address from EEPROM or OTP */
-- if ((lan78xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
-- addr) == 0) ||
-- (lan78xx_read_otp(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
-- addr) == 0)) {
-- if (is_valid_ether_addr(addr)) {
-- /* eeprom values are valid so use them */
-- netif_dbg(dev, ifup, dev->net,
-- "MAC address read from EEPROM");
-- } else {
-- /* generate random MAC */
-- random_ether_addr(addr);
-- netif_dbg(dev, ifup, dev->net,
-- "MAC address set to random addr");
-- }
--
-- addr_lo = addr[0] | (addr[1] << 8) |
-- (addr[2] << 16) | (addr[3] << 24);
-- addr_hi = addr[4] | (addr[5] << 8);
--
-- ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
-- ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
-+ if (!eth_platform_get_mac_address(&dev->udev->dev, addr)) {
-+ /* valid address present in Device Tree */
-+ netif_dbg(dev, ifup, dev->net,
-+ "MAC address read from Device Tree");
-+ } else if (((lan78xx_read_eeprom(dev, EEPROM_MAC_OFFSET,
-+ ETH_ALEN, addr) == 0) ||
-+ (lan78xx_read_otp(dev, EEPROM_MAC_OFFSET,
-+ ETH_ALEN, addr) == 0)) &&
-+ is_valid_ether_addr(addr)) {
-+ /* eeprom values are valid so use them */
-+ netif_dbg(dev, ifup, dev->net,
-+ "MAC address read from EEPROM");
- } else {
- /* generate random MAC */
- random_ether_addr(addr);
- netif_dbg(dev, ifup, dev->net,
- "MAC address set to random addr");
- }
-+
-+ addr_lo = addr[0] | (addr[1] << 8) |
-+ (addr[2] << 16) | (addr[3] << 24);
-+ addr_hi = addr[4] | (addr[5] << 8);
-+
-+ ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
-+ ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
- }
-
- ret = lan78xx_write_reg(dev, MAF_LO(0), addr_lo);
---
-2.17.0
-
-From f8f9ad43b37f5db5895619e4304aa9ba286cbbb0 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Thu, 19 Apr 2018 17:59:40 +0100
-Subject: [PATCH 8/9] dt-bindings: Document the DT bindings for lan78xx
-
-The Microchip LAN78XX family of devices are Ethernet controllers with
-a USB interface. Despite being discoverable devices it can be useful to
-be able to configure them from Device Tree, particularly in low-cost
-applications without an EEPROM or programmed OTP.
-
-Document the supported properties in a bindings file.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
----
- .../bindings/net/microchip,lan78xx.txt | 54 +++++++++++++++++++
- 1 file changed, 54 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/net/microchip,lan78xx.txt
-
-diff --git a/Documentation/devicetree/bindings/net/microchip,lan78xx.txt b/Documentation/devicetree/bindings/net/microchip,lan78xx.txt
-new file mode 100644
-index 000000000000..76786a0f6d3d
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/microchip,lan78xx.txt
-@@ -0,0 +1,54 @@
-+Microchip LAN78xx Gigabit Ethernet controller
-+
-+The LAN78XX devices are usually configured by programming their OTP or with
-+an external EEPROM, but some platforms (e.g. Raspberry Pi 3 B+) have neither.
-+The Device Tree properties, if present, override the OTP and EEPROM.
-+
-+Required properties:
-+- compatible: Should be one of "usb424,7800", "usb424,7801" or "usb424,7850".
-+
-+Optional properties:
-+- local-mac-address: see ethernet.txt
-+- mac-address: see ethernet.txt
-+
-+Optional properties of the embedded PHY:
-+- microchip,led-modes: a 0..4 element vector, with each element configuring
-+ the operating mode of an LED. Omitted LEDs are turned off. Allowed values
-+ are defined in "include/dt-bindings/net/microchip-lan78xx.h".
-+
-+Example:
-+
-+/* Based on the configuration for a Raspberry Pi 3 B+ */
-+&usb {
-+ usb-port@1 {
-+ compatible = "usb424,2514";
-+ reg = <1>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ usb-port@1 {
-+ compatible = "usb424,2514";
-+ reg = <1>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ethernet: ethernet@1 {
-+ compatible = "usb424,7800";
-+ reg = <1>;
-+ local-mac-address = [ 00 11 22 33 44 55 ];
-+
-+ mdio {
-+ #address-cells = <0x1>;
-+ #size-cells = <0x0>;
-+ eth_phy: ethernet-phy@1 {
-+ reg = <1>;
-+ microchip,led-modes = <
-+ LAN78XX_LINK_1000_ACTIVITY
-+ LAN78XX_LINK_10_100_ACTIVITY
-+ >;
-+ };
-+ };
-+ };
-+ };
-+ };
-+};
---
-2.17.0
-
-From be24db04ec2949e9b03763366f100ae40836c61e Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Mon, 23 Apr 2018 14:31:26 +0100
-Subject: [PATCH 9/9] lan78xx: Read LED states from Device Tree
-
-Add support for DT property "microchip,led-modes", a vector of zero
-to four cells (u32s) in the range 0-15, each of which sets the mode
-for one of the LEDs. Some possible values are:
-
- 0=link/activity 1=link1000/activity
- 2=link100/activity 3=link10/activity
- 4=link100/1000/activity 5=link10/1000/activity
- 6=link10/100/activity 14=off 15=on
-
-These values are given symbolic constants in a dt-bindings header.
-
-Also use the presence of the DT property to indicate that the
-LEDs should be enabled - necessary in the event that no valid OTP
-or EEPROM is available.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
----
- MAINTAINERS | 1 +
- drivers/net/phy/microchip.c | 25 ++++++++++++++++
- drivers/net/usb/lan78xx.c | 32 ++++++++++++++++++++-
- include/dt-bindings/net/microchip-lan78xx.h | 21 ++++++++++++++
- include/linux/microchipphy.h | 3 ++
- 5 files changed, 81 insertions(+), 1 deletion(-)
- create mode 100644 include/dt-bindings/net/microchip-lan78xx.h
-
-diff --git a/MAINTAINERS b/MAINTAINERS
-index 6e950b8b4a41..c7d5f8c60a2c 100644
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -14437,6 +14437,7 @@ M: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
- L: netdev@vger.kernel.org
- S: Maintained
- F: drivers/net/usb/lan78xx.*
-+F: include/dt-bindings/net/microchip-lan78xx.h
-
- USB MASS STORAGE DRIVER
- M: Alan Stern <stern@rowland.harvard.edu>
-diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
-index a97ac8c12c4c..2d67937866a3 100644
---- a/drivers/net/phy/microchip.c
-+++ b/drivers/net/phy/microchip.c
-@@ -21,6 +21,8 @@
- #include <linux/phy.h>
- #include <linux/microchipphy.h>
- #include <linux/delay.h>
-+#include <linux/of.h>
-+#include <dt-bindings/net/microchip-lan78xx.h>
-
- #define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@microchip.com>"
- #define DRIVER_DESC "Microchip LAN88XX PHY driver"
-@@ -225,6 +227,8 @@ static int lan88xx_probe(struct phy_device *phydev)
- {
- struct device *dev = &phydev->mdio.dev;
- struct lan88xx_priv *priv;
-+ u32 led_modes[4];
-+ int len;
-
- priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
-@@ -232,6 +236,27 @@ static int lan88xx_probe(struct phy_device *phydev)
-
- priv->wolopts = 0;
-
-+ len = of_property_read_variable_u32_array(dev->of_node,
-+ "microchip,led-modes",
-+ led_modes,
-+ 0,
-+ ARRAY_SIZE(led_modes));
-+ if (len >= 0) {
-+ u32 reg = 0;
-+ int i;
-+
-+ for (i = 0; i < len; i++) {
-+ if (led_modes[i] > 15)
-+ return -EINVAL;
-+ reg |= led_modes[i] << (i * 4);
-+ }
-+ for (; i < ARRAY_SIZE(led_modes); i++)
-+ reg |= LAN78XX_FORCE_LED_OFF << (i * 4);
-+ (void)phy_write(phydev, LAN78XX_PHY_LED_MODE_SELECT, reg);
-+ } else if (len == -EOVERFLOW) {
-+ return -EINVAL;
-+ }
-+
- /* these values can be used to identify internal PHY */
- priv->chip_id = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_ID);
- priv->chip_rev = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_REV);
-diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
-index 6c38a74bb32d..01b876daa600 100644
---- a/drivers/net/usb/lan78xx.c
-+++ b/drivers/net/usb/lan78xx.c
-@@ -37,6 +37,7 @@
- #include <linux/irqchip/chained_irq.h>
- #include <linux/microchipphy.h>
- #include <linux/phy.h>
-+#include <linux/of_mdio.h>
- #include <linux/of_net.h>
- #include "lan78xx.h"
-
-@@ -1760,6 +1761,7 @@ static int lan78xx_mdiobus_write(struct mii_bus *bus, int phy_id, int idx,
-
- static int lan78xx_mdio_init(struct lan78xx_net *dev)
- {
-+ struct device_node *node;
- int ret;
-
- dev->mdiobus = mdiobus_alloc();
-@@ -1788,7 +1790,13 @@ static int lan78xx_mdio_init(struct lan78xx_net *dev)
- break;
- }
-
-- ret = mdiobus_register(dev->mdiobus);
-+ node = of_get_child_by_name(dev->udev->dev.of_node, "mdio");
-+ if (node) {
-+ ret = of_mdiobus_register(dev->mdiobus, node);
-+ of_node_put(node);
-+ } else {
-+ ret = mdiobus_register(dev->mdiobus);
-+ }
- if (ret) {
- netdev_err(dev->net, "can't register MDIO bus\n");
- goto exit1;
-@@ -2077,6 +2085,28 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
- mii_adv = (u32)mii_advertise_flowctrl(dev->fc_request_control);
- phydev->advertising |= mii_adv_to_ethtool_adv_t(mii_adv);
-
-+ if (phydev->mdio.dev.of_node) {
-+ u32 reg;
-+ int len;
-+
-+ len = of_property_count_elems_of_size(phydev->mdio.dev.of_node,
-+ "microchip,led-modes",
-+ sizeof(u32));
-+ if (len >= 0) {
-+ /* Ensure the appropriate LEDs are enabled */
-+ lan78xx_read_reg(dev, HW_CFG, &reg);
-+ reg &= ~(HW_CFG_LED0_EN_ |
-+ HW_CFG_LED1_EN_ |
-+ HW_CFG_LED2_EN_ |
-+ HW_CFG_LED3_EN_);
-+ reg |= (len > 0) * HW_CFG_LED0_EN_ |
-+ (len > 1) * HW_CFG_LED1_EN_ |
-+ (len > 2) * HW_CFG_LED2_EN_ |
-+ (len > 3) * HW_CFG_LED3_EN_;
-+ lan78xx_write_reg(dev, HW_CFG, reg);
-+ }
-+ }
-+
- genphy_config_aneg(phydev);
-
- dev->fc_autoneg = phydev->autoneg;
-diff --git a/include/dt-bindings/net/microchip-lan78xx.h b/include/dt-bindings/net/microchip-lan78xx.h
-new file mode 100644
-index 000000000000..0742ff075307
---- /dev/null
-+++ b/include/dt-bindings/net/microchip-lan78xx.h
-@@ -0,0 +1,21 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+#ifndef _DT_BINDINGS_MICROCHIP_LAN78XX_H
-+#define _DT_BINDINGS_MICROCHIP_LAN78XX_H
-+
-+/* LED modes for LAN7800/LAN7850 embedded PHY */
-+
-+#define LAN78XX_LINK_ACTIVITY 0
-+#define LAN78XX_LINK_1000_ACTIVITY 1
-+#define LAN78XX_LINK_100_ACTIVITY 2
-+#define LAN78XX_LINK_10_ACTIVITY 3
-+#define LAN78XX_LINK_100_1000_ACTIVITY 4
-+#define LAN78XX_LINK_10_1000_ACTIVITY 5
-+#define LAN78XX_LINK_10_100_ACTIVITY 6
-+#define LAN78XX_DUPLEX_COLLISION 8
-+#define LAN78XX_COLLISION 9
-+#define LAN78XX_ACTIVITY 10
-+#define LAN78XX_AUTONEG_FAULT 12
-+#define LAN78XX_FORCE_LED_OFF 14
-+#define LAN78XX_FORCE_LED_ON 15
-+
-+#endif
-diff --git a/include/linux/microchipphy.h b/include/linux/microchipphy.h
-index 8f9c90379732..fd1fc8c248ef 100644
---- a/include/linux/microchipphy.h
-+++ b/include/linux/microchipphy.h
-@@ -78,4 +78,7 @@
- #define LAN88XX_EXT_PAGE_TR_LOW_DATA 17
- #define LAN88XX_EXT_PAGE_TR_HIGH_DATA 18
-
-+/* Registers specific to the LAN7800/LAN7850 embedded phy */
-+#define LAN78XX_PHY_LED_MODE_SELECT (0x1D)
-+
- #endif /* _MICROCHIPPHY_H */
---
-2.17.0