summaryrefslogtreecommitdiffstats
path: root/arm64-pine64-pinetab.patch
diff options
context:
space:
mode:
Diffstat (limited to 'arm64-pine64-pinetab.patch')
-rw-r--r--arm64-pine64-pinetab.patch583
1 files changed, 0 insertions, 583 deletions
diff --git a/arm64-pine64-pinetab.patch b/arm64-pine64-pinetab.patch
deleted file mode 100644
index cafbc71bd..000000000
--- a/arm64-pine64-pinetab.patch
+++ /dev/null
@@ -1,583 +0,0 @@
-From e15d9c7cb74033f668c19a65abfd77ed7331f91e Mon Sep 17 00:00:00 2001
-From: Icenowy Zheng <icenowy@aosc.io>
-Date: Thu, 16 Jan 2020 11:36:35 +0800
-Subject: [PATCH 1/2] dt-bindings: arm: sunxi: add binding for PineTab tablet
-
-Add the device tree binding for Pine64's PineTab tablet, which uses
-Allwinner A64 SoC.
-
-Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Maxime Ripard <maxime@cerno.tech>
----
- Documentation/devicetree/bindings/arm/sunxi.yaml | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
-index 327ce6730823..159060b65c5d 100644
---- a/Documentation/devicetree/bindings/arm/sunxi.yaml
-+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
-@@ -636,6 +636,11 @@ properties:
- - const: pine64,pinebook
- - const: allwinner,sun50i-a64
-
-+ - description: Pine64 PineTab
-+ items:
-+ - const: pine64,pinetab
-+ - const: allwinner,sun50i-a64
-+
- - description: Pine64 SoPine Baseboard
- items:
- - const: pine64,sopine-baseboard
---
-2.24.1
-
-From d7b56d337bb980f0b996958ec6808253c4f50771 Mon Sep 17 00:00:00 2001
-From: Icenowy Zheng <icenowy@aosc.io>
-Date: Thu, 16 Jan 2020 11:36:36 +0800
-Subject: [PATCH 2/2] arm64: dts: allwinner: a64: add support for PineTab
-
-PineTab is a 10.1" tablet by Pine64 with Allwinner A64 inside.
-
-It includes the following peripherals:
-
-USB:
-- A microUSB Type-B port connected to the OTG-capable USB PHY of
-Allwinner A64. The ID pin is connected to a GPIO of the A64 SoC, and the
-Vbus is connected to the Vbus of AXP803 PMIC. These enables OTG
-functionality on this port.
-- A USB Type-A port is connected to the internal hub attached to the
-non-OTG USB PHY of Allwinner A64.
-- There are reserved pins for an external keyboard connected to the
-internal hub.
-
-Power:
-- The microUSB port has its Vbus connected to AXP803, mentioned above.
-- A DC jack (of a strange size, 2.5mm outer diameter) is connected to
-the ACIN of AXP803.
-- A Li-Polymer battery is connected to the battery pins of AXP803.
-
-Storage:
-- An tradition Pine64 eMMC slot is on the board, mounted with an eMMC
-module by factory.
-- An external microSD slot is hidden under a protect case.
-
-Display:
-- A MIPI-DSI LCD panel (800x1280) is connected to the DSI port of A64 SoC.
-- A mini HDMI port.
-
-Input:
-- A touch panel attached to a Goodix GT9271 touch controller.
-- Volume keys connected to the LRADC of the A64 SoC.
-
-Camera:
-- An OV5640 CMOS camera is at rear, connected to the CSI bus of A64 SoC.
-- A GC2145 CMOS camera is at front, shares the same CSI bus with OV5640.
-
-Audio:
-- A headphone jack is conencted to the SoC's internal codec.
-- A speaker connected is to the Line Out port of SoC's internal codec, via
-an amplifier.
-
-Misc:
-- Debug UART is muxed with the headphone jack, with the switch next to
-the microSD slot.
-- A bosch BMA223 accelerometer is connected to the I2C bus of A64 SoC.
-- Wi-Fi and Bluetooth are available via a RTL8723CS chip, similar to the
-one in Pinebook.
-
-This commit adds a basically usable device tree for it, implementing
-most of the features mentioned above. HDMI is not supported now because
-bad LCD-HDMI coexistence situation of mainline A64 display driver, the
-front camera currently lacks a driver and a facility to share the bus
-with the rear one, and the accelerometer currently lacks a DT binding.
-
-Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
-Signed-off-by: Maxime Ripard <maxime@cerno.tech>
----
- arch/arm64/boot/dts/allwinner/Makefile | 1 +
- .../boot/dts/allwinner/sun50i-a64-pinetab.dts | 460 ++++++++++++++++++
- 2 files changed, 461 insertions(+)
- create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
-
-diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
-index cf4f78617c3f..6dad63881cd3 100644
---- a/arch/arm64/boot/dts/allwinner/Makefile
-+++ b/arch/arm64/boot/dts/allwinner/Makefile
-@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb
-+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
-new file mode 100644
-index 000000000000..316e8a443913
---- /dev/null
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
-@@ -0,0 +1,460 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
-+ *
-+ */
-+
-+/dts-v1/;
-+
-+#include "sun50i-a64.dtsi"
-+#include "sun50i-a64-cpu-opp.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/pwm/pwm.h>
-+
-+/ {
-+ model = "PineTab";
-+ compatible = "pine64,pinetab", "allwinner,sun50i-a64";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ ethernet0 = &rtl8723cs;
-+ };
-+
-+ backlight: backlight {
-+ compatible = "pwm-backlight";
-+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-+ brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>;
-+ default-brightness-level = <15>;
-+ enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
-+ power-supply = <&vdd_bl>;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ i2c-csi {
-+ compatible = "i2c-gpio";
-+ sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */
-+ scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */
-+ i2c-gpio,delay-us = <5>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ /* Rear camera */
-+ ov5640: camera@3c {
-+ compatible = "ovti,ov5640";
-+ reg = <0x3c>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&csi_mclk_pin>;
-+ clocks = <&ccu CLK_CSI_MCLK>;
-+ clock-names = "xclk";
-+
-+ AVDD-supply = <&reg_dldo3>;
-+ DOVDD-supply = <&reg_aldo1>;
-+ DVDD-supply = <&reg_eldo3>;
-+ reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* PE14 */
-+ powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
-+
-+ port {
-+ ov5640_ep: endpoint {
-+ remote-endpoint = <&csi_ep>;
-+ bus-width = <8>;
-+ hsync-active = <1>; /* Active high */
-+ vsync-active = <0>; /* Active low */
-+ data-active = <1>; /* Active high */
-+ pclk-sample = <1>; /* Rising */
-+ };
-+ };
-+ };
-+ };
-+
-+ speaker_amp: audio-amplifier {
-+ compatible = "simple-audio-amplifier";
-+ enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
-+ sound-name-prefix = "Speaker Amp";
-+ };
-+
-+ vdd_bl: regulator@0 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "bl-3v3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
-+ enable-active-high;
-+ };
-+
-+ wifi_pwrseq: wifi_pwrseq {
-+ compatible = "mmc-pwrseq-simple";
-+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
-+ post-power-on-delay-ms = <200>;
-+ };
-+};
-+
-+&codec {
-+ status = "okay";
-+};
-+
-+&codec_analog {
-+ hpvcc-supply = <&reg_eldo1>;
-+ status = "okay";
-+};
-+
-+&cpu0 {
-+ cpu-supply = <&reg_dcdc2>;
-+};
-+
-+&cpu1 {
-+ cpu-supply = <&reg_dcdc2>;
-+};
-+
-+&cpu2 {
-+ cpu-supply = <&reg_dcdc2>;
-+};
-+
-+&cpu3 {
-+ cpu-supply = <&reg_dcdc2>;
-+};
-+
-+&csi {
-+ status = "okay";
-+
-+ port {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ csi_ep: endpoint {
-+ remote-endpoint = <&ov5640_ep>;
-+ bus-width = <8>;
-+ hsync-active = <1>; /* Active high */
-+ vsync-active = <0>; /* Active low */
-+ data-active = <1>; /* Active high */
-+ pclk-sample = <1>; /* Rising */
-+ };
-+ };
-+};
-+
-+&dai {
-+ status = "okay";
-+};
-+
-+&de {
-+ status = "okay";
-+};
-+
-+&dphy {
-+ status = "okay";
-+};
-+
-+&dsi {
-+ vcc-dsi-supply = <&reg_dldo1>;
-+ status = "okay";
-+
-+ panel@0 {
-+ compatible = "feixin,k101-im2ba02";
-+ reg = <0>;
-+ avdd-supply = <&reg_dc1sw>;
-+ dvdd-supply = <&reg_dc1sw>;
-+ cvdd-supply = <&reg_ldo_io1>;
-+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
-+ backlight = <&backlight>;
-+ };
-+};
-+
-+&ehci0 {
-+ status = "okay";
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&i2c0 {
-+ status = "okay";
-+
-+ touchscreen@5d {
-+ compatible = "goodix,gt9271";
-+ reg = <0x5d>;
-+ interrupt-parent = <&pio>;
-+ interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
-+ irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+ reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
-+ AVDD28-supply = <&reg_ldo_io1>;
-+ };
-+};
-+
-+&i2c0_pins {
-+ bias-pull-up;
-+};
-+
-+&i2c1 {
-+ status = "okay";
-+
-+ /* TODO: add Bochs BMA223 accelerometer here */
-+};
-+
-+&lradc {
-+ vref-supply = <&reg_aldo3>;
-+ status = "okay";
-+
-+ button-200 {
-+ label = "Volume Up";
-+ linux,code = <KEY_VOLUMEUP>;
-+ channel = <0>;
-+ voltage = <200000>;
-+ };
-+
-+ button-400 {
-+ label = "Volume Down";
-+ linux,code = <KEY_VOLUMEDOWN>;
-+ channel = <0>;
-+ voltage = <400000>;
-+ };
-+};
-+
-+&mixer1 {
-+ status = "okay";
-+};
-+
-+&mmc0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc0_pins>;
-+ vmmc-supply = <&reg_dcdc1>;
-+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
-+ disable-wp;
-+ bus-width = <4>;
-+ status = "okay";
-+};
-+
-+&mmc1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc1_pins>;
-+ vmmc-supply = <&reg_dldo4>;
-+ vqmmc-supply = <&reg_eldo1>;
-+ mmc-pwrseq = <&wifi_pwrseq>;
-+ bus-width = <4>;
-+ non-removable;
-+ status = "okay";
-+
-+ rtl8723cs: wifi@1 {
-+ reg = <1>;
-+ };
-+};
-+
-+&mmc2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc2_pins>;
-+ vmmc-supply = <&reg_dcdc1>;
-+ vqmmc-supply = <&reg_dcdc1>;
-+ bus-width = <8>;
-+ non-removable;
-+ cap-mmc-hw-reset;
-+ status = "okay";
-+};
-+
-+&ohci0 {
-+ status = "okay";
-+};
-+
-+&pwm {
-+ status = "okay";
-+};
-+
-+&r_rsb {
-+ status = "okay";
-+
-+ axp803: pmic@3a3 {
-+ compatible = "x-powers,axp803";
-+ reg = <0x3a3>;
-+ interrupt-parent = <&r_intc>;
-+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+ x-powers,drive-vbus-en;
-+ };
-+};
-+
-+#include "axp803.dtsi"
-+
-+&ac_power_supply {
-+ status = "okay";
-+};
-+
-+&battery_power_supply {
-+ status = "okay";
-+};
-+
-+&reg_aldo1 {
-+ regulator-min-microvolt = <2800000>;
-+ regulator-max-microvolt = <2800000>;
-+ regulator-name = "dovdd-csi";
-+};
-+
-+&reg_aldo2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-pl";
-+};
-+
-+&reg_aldo3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <2700000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-pll-avcc";
-+};
-+
-+&reg_dc1sw {
-+ regulator-name = "vcc-lcd";
-+};
-+
-+&reg_dcdc1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-3v3";
-+};
-+
-+&reg_dcdc2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1300000>;
-+ regulator-name = "vdd-cpux";
-+};
-+
-+/* DCDC3 is polyphased with DCDC2 */
-+
-+&reg_dcdc5 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1200000>;
-+ regulator-max-microvolt = <1200000>;
-+ regulator-name = "vcc-dram";
-+};
-+
-+&reg_dcdc6 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1100000>;
-+ regulator-max-microvolt = <1100000>;
-+ regulator-name = "vdd-sys";
-+};
-+
-+&reg_dldo1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-hdmi-dsi-sensor";
-+};
-+
-+&reg_dldo3 {
-+ regulator-min-microvolt = <2800000>;
-+ regulator-max-microvolt = <2800000>;
-+ regulator-name = "avdd-csi";
-+};
-+
-+&reg_dldo4 {
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-wifi";
-+};
-+
-+&reg_drivevbus {
-+ regulator-name = "usb0-vbus";
-+ status = "okay";
-+};
-+
-+&reg_eldo1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-name = "cpvdd";
-+};
-+
-+&reg_eldo2 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-name = "vcca-1v8";
-+};
-+
-+&reg_eldo3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-name = "dvdd-1v8-csi";
-+};
-+
-+&reg_fldo1 {
-+ regulator-min-microvolt = <1200000>;
-+ regulator-max-microvolt = <1200000>;
-+ regulator-name = "vcc-1v2-hsic";
-+};
-+
-+&reg_fldo2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1100000>;
-+ regulator-max-microvolt = <1100000>;
-+ regulator-name = "vdd-cpus";
-+};
-+
-+&reg_ldo_io0 {
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-usb";
-+ status = "okay";
-+};
-+
-+&reg_ldo_io1 {
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-enable-ramp-delay = <3500000>;
-+ regulator-name = "vcc-touchscreen";
-+ status = "okay";
-+};
-+
-+&reg_rtc_ldo {
-+ regulator-name = "vcc-rtc";
-+};
-+
-+&sound {
-+ status = "okay";
-+ simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
-+ simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
-+ "Microphone", "Internal Microphone Right",
-+ "Headphone", "Headphone Jack",
-+ "Speaker", "Internal Speaker";
-+ simple-audio-card,routing =
-+ "Left DAC", "AIF1 Slot 0 Left",
-+ "Right DAC", "AIF1 Slot 0 Right",
-+ "Speaker Amp INL", "LINEOUT",
-+ "Speaker Amp INR", "LINEOUT",
-+ "Internal Speaker", "Speaker Amp OUTL",
-+ "Internal Speaker", "Speaker Amp OUTR",
-+ "Headphone Jack", "HP",
-+ "AIF1 Slot 0 Left ADC", "Left ADC",
-+ "AIF1 Slot 0 Right ADC", "Right ADC",
-+ "Internal Microphone Left", "MBIAS",
-+ "MIC1", "Internal Microphone Left",
-+ "Internal Microphone Right", "HBIAS",
-+ "MIC2", "Internal Microphone Right";
-+};
-+
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pb_pins>;
-+ status = "okay";
-+};
-+
-+&usb_otg {
-+ dr_mode = "otg";
-+ status = "okay";
-+};
-+
-+&usb_power_supply {
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
-+ usb0_vbus_power-supply = <&usb_power_supply>;
-+ usb0_vbus-supply = <&reg_drivevbus>;
-+ usb1_vbus-supply = <&reg_ldo_io0>;
-+ status = "okay";
-+};
---
-2.24.1
-