diff options
Diffstat (limited to 'arm-imx6-hummingboard2.patch')
| -rw-r--r-- | arm-imx6-hummingboard2.patch | 733 |
1 files changed, 733 insertions, 0 deletions
diff --git a/arm-imx6-hummingboard2.patch b/arm-imx6-hummingboard2.patch new file mode 100644 index 000000000..bcf2961dc --- /dev/null +++ b/arm-imx6-hummingboard2.patch @@ -0,0 +1,733 @@ +From e2b55af60f9f498b95ffb458955f4ff787bd55a1 Mon Sep 17 00:00:00 2001 +From: Peter Robinson <pbrobinson@gmail.com> +Date: Fri, 20 Jan 2017 08:32:55 +0000 +Subject: [PATCH] Add support for Hummingobard2 (Edge/Gate) + +http://www.spinics.net/lists/arm-kernel/msg552554.html + +Signed-off-by: Peter Robinson <pbrobinson@gmail.com> +--- + arch/arm/boot/dts/Makefile | 2 + + arch/arm/boot/dts/imx6dl-hummingboard2.dts | 52 +++ + arch/arm/boot/dts/imx6q-hummingboard2.dts | 60 +++ + arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi | 562 +++++++++++++++++++++++++++ + 4 files changed, 676 insertions(+) + create mode 100644 arch/arm/boot/dts/imx6dl-hummingboard2.dts + create mode 100644 arch/arm/boot/dts/imx6q-hummingboard2.dts + create mode 100644 arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index 7327250..09227cc 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -348,6 +348,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ + imx6dl-gw552x.dtb \ + imx6dl-gw553x.dtb \ + imx6dl-hummingboard.dtb \ ++ imx6dl-hummingboard2.dtb \ + imx6dl-icore.dtb \ + imx6dl-nit6xlite.dtb \ + imx6dl-nitrogen6x.dtb \ +@@ -390,6 +391,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ + imx6q-gw553x.dtb \ + imx6q-h100.dtb \ + imx6q-hummingboard.dtb \ ++ imx6q-hummingboard2.dtb \ + imx6q-icore.dtb \ + imx6q-icore-rqs.dtb \ + imx6q-marsboard.dtb \ +diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2.dts b/arch/arm/boot/dts/imx6dl-hummingboard2.dts +new file mode 100644 +index 0000000..990b505 +--- /dev/null ++++ b/arch/arm/boot/dts/imx6dl-hummingboard2.dts +@@ -0,0 +1,52 @@ ++/* ++ * Device Tree file for SolidRun HummingBoard2 ++ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> ++ * Based on work by Russell King ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License. ++ * ++ * This file is distributed in the hope that it will be useful ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++/dts-v1/; ++ ++#include "imx6dl.dtsi" ++#include "imx6qdl-hummingboard2.dtsi" ++ ++/ { ++ model = "SolidRun HummingBoard2 Solo/DualLite"; ++ compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl"; ++}; +diff --git a/arch/arm/boot/dts/imx6q-hummingboard2.dts b/arch/arm/boot/dts/imx6q-hummingboard2.dts +new file mode 100644 +index 0000000..f5eec91 +--- /dev/null ++++ b/arch/arm/boot/dts/imx6q-hummingboard2.dts +@@ -0,0 +1,60 @@ ++/* ++ * Device Tree file for SolidRun HummingBoard2 ++ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> ++ * Based on work by Russell King ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License. ++ * ++ * This file is distributed in the hope that it will be useful ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++/dts-v1/; ++ ++#include "imx6q.dtsi" ++#include "imx6qdl-hummingboard2.dtsi" ++ ++/ { ++ model = "SolidRun HummingBoard2 Dual/Quad"; ++ compatible = "solidrun,hummingboard2/q", "fsl,imx6q"; ++}; ++ ++&sata { ++ status = "okay"; ++ fsl,transmit-level-mV = <1104>; ++ fsl,transmit-boost-mdB = <0>; ++ fsl,transmit-atten-16ths = <9>; ++ fsl,no-spread-spectrum; ++}; +diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi +new file mode 100644 +index 0000000..66098a5 +--- /dev/null ++++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi +@@ -0,0 +1,562 @@ ++/* ++ * Device Tree file for SolidRun HummingBoard2 ++ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License. ++ * ++ * This file is distributed in the hope that it will be useful ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++#include "imx6qdl-microsom.dtsi" ++#include "imx6qdl-microsom-ar8035.dtsi" ++ ++/ { ++ chosen { ++ stdout-path = &uart1; ++ }; ++ ++ ir_recv: ir-receiver { ++ compatible = "gpio-ir-receiver"; ++ gpios = <&gpio7 9 GPIO_ACTIVE_LOW>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hummingboard2_gpio7_9>; ++ linux,rc-map-name = "rc-rc6-mce"; ++ }; ++ ++ regulators { ++ compatible = "simple-bus"; ++ ++ reg_3p3v: 3p3v { ++ compatible = "regulator-fixed"; ++ regulator-name = "3P3V"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ reg_1p8v: 1p8v { ++ compatible = "regulator-fixed"; ++ regulator-name = "1P8V"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-always-on; ++ }; ++ ++ reg_usdhc2_vmmc: reg-usdhc2-vmmc { ++ compatible = "regulator-fixed"; ++ gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hummingboard2_vmmc>; ++ regulator-boot-on; ++ regulator-max-microvolt = <3300000>; ++ regulator-min-microvolt = <3300000>; ++ regulator-name = "usdhc2_vmmc"; ++ startup-delay-us = <1000>; ++ }; ++ ++ reg_usbh1_vbus: usb-h1-vbus { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>; ++ regulator-name = "usb_h1_vbus"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ }; ++ ++ reg_usbotg_vbus: usb-otg-vbus { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>; ++ regulator-name = "usb_otg_vbus"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ }; ++ ++ reg_usbh2_vbus: usb-h2-vbus { ++ compatible = "regulator-gpio"; ++ enable-active-high; ++ enable-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>; ++ regulator-name = "usb_h2_vbus"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ regulator-boot-on; ++ }; ++ ++ reg_usbh3_vbus: usb-h3-vbus { ++ compatible = "regulator-gpio"; ++ enable-active-high; ++ enable-gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>; ++ regulator-name = "usb_h3_vbus"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ regulator-boot-on; ++ }; ++ }; ++ ++ sound-sgtl5000 { ++ audio-codec = <&sgtl5000>; ++ audio-routing = ++ "MIC_IN", "Mic Jack", ++ "Mic Jack", "Mic Bias", ++ "Headphone Jack", "HP_OUT"; ++ compatible = "fsl,imx-audio-sgtl5000"; ++ model = "On-board Codec"; ++ mux-ext-port = <5>; ++ mux-int-port = <1>; ++ ssi-controller = <&ssi1>; ++ }; ++}; ++ ++&audmux { ++ status = "okay"; ++}; ++ ++&ecspi2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>; ++ fsl,spi-num-chipselects = <1>; ++ cs-gpios = <&gpio2 26 0>; ++ status = "okay"; ++}; ++ ++&hdmi { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hummingboard2_hdmi>; ++ ddc-i2c-bus = <&i2c2>; ++ status = "okay"; ++}; ++ ++&i2c1 { ++ clock-frequency = <100000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hummingboard2_i2c1>; ++ status = "okay"; ++ ++ rtc: pcf8523@68 { ++ compatible = "nxp,pcf8523"; ++ reg = <0x68>; ++ nxp,12p5_pf; ++ }; ++ ++ sgtl5000: sgtl5000@0a { ++ clocks = <&clks IMX6QDL_CLK_CKO>; ++ compatible = "fsl,sgtl5000"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>; ++ reg = <0x0a>; ++ VDDA-supply = <®_3p3v>; ++ VDDIO-supply = <®_3p3v>; ++ }; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hummingboard2_i2c2>; ++ status = "okay"; ++}; ++ ++&i2c3 { ++ clock-frequency = <100000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hummingboard2_i2c3>; ++ status = "okay"; ++}; ++ ++&iomuxc { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hog>; ++ hummingboard2 { ++ pinctrl_hog: hoggrp { ++ fsl,pins = < ++ /* ++ * 36 pin headers GPIO description. The pins ++ * numbering as following - ++ * ++ * 3.2v 5v 74 75 ++ * 73 72 71 70 ++ * 69 68 67 66 ++ * ++ * 77 78 79 76 ++ * 65 64 61 60 ++ * 53 52 51 50 ++ * 49 48 166 132 ++ * 95 94 90 91 ++ * GND 54 24 204 ++ * ++ * The GPIO numbers can be extracted using ++ * signal name from below. ++ * Example - ++ * MX6QDL_PAD_EIM_DA10__GPIO3_IO10 is ++ * GPIO(3,10) which is (3-1)*32+10 = gpio 74 ++ * ++ * i.e. The mapping of GPIO(X,Y) to Linux gpio ++ * number is : gpio number = (X-1) * 32 + Y ++ */ ++ /* DI1_PIN15 */ ++ MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x400130b1 ++ /* DI1_PIN02 */ ++ MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x400130b1 ++ /* DISP1_DATA00 */ ++ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x400130b1 ++ /* DISP1_DATA01 */ ++ MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x400130b1 ++ /* DISP1_DATA02 */ ++ MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x400130b1 ++ /* DISP1_DATA03 */ ++ MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x400130b1 ++ /* DISP1_DATA04 */ ++ MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x400130b1 ++ /* DISP1_DATA05 */ ++ MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x400130b1 ++ /* DISP1_DATA06 */ ++ MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x400130b1 ++ /* DISP1_DATA07 */ ++ MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x400130b1 ++ /* DI1_D0_CS */ ++ MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x400130b1 ++ /* DI1_D1_CS */ ++ MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x400130b1 ++ /* DI1_PIN01 */ ++ MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x400130b1 ++ /* DI1_PIN03 */ ++ MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x400130b1 ++ /* DISP1_DATA08 */ ++ MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x400130b1 ++ /* DISP1_DATA09 */ ++ MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x400130b1 ++ /* DISP1_DATA10 */ ++ MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x400130b1 ++ /* DISP1_DATA11 */ ++ MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x400130b1 ++ /* DISP1_DATA12 */ ++ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x400130b1 ++ /* DISP1_DATA13 */ ++ MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x400130b1 ++ /* DISP1_DATA14 */ ++ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x400130b1 ++ /* DISP1_DATA15 */ ++ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x400130b1 ++ /* DISP1_DATA16 */ ++ MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x400130b1 ++ /* DISP1_DATA17 */ ++ MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x400130b1 ++ /* DISP1_DATA18 */ ++ MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x400130b1 ++ /* DISP1_DATA19 */ ++ MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x400130b1 ++ /* DISP1_DATA20 */ ++ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x400130b1 ++ /* DISP1_DATA21 */ ++ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x400130b1 ++ /* DISP1_DATA22 */ ++ MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x400130b1 ++ /* DISP1_DATA23 */ ++ MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400130b1 ++ /* DI1_DISP_CLK */ ++ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x400130b1 ++ /* SPDIF_IN */ ++ MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x400130b1 ++ /* SPDIF_OUT */ ++ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x400130b1 ++ ++ /* MikroBUS GPIO pin number 10 */ ++ MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1 ++ >; ++ }; ++ ++ pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9 { ++ fsl,pins = < ++ MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000 ++ >; ++ }; ++ ++ pinctrl_hummingboard2_hdmi: hummingboard2-hdmi { ++ fsl,pins = < ++ MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 ++ >; ++ }; ++ ++ pinctrl_hummingboard2_i2c1: hummingboard2-i2c1 { ++ fsl,pins = < ++ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 ++ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 ++ >; ++ }; ++ ++ pinctrl_hummingboard2_i2c2: hummingboard2-i2c2 { ++ fsl,pins = < ++ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 ++ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 ++ >; ++ }; ++ ++ pinctrl_hummingboard2_i2c3: hummingboard2-i2c3 { ++ fsl,pins = < ++ MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 ++ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 ++ >; ++ }; ++ ++ pinctrl_hummingboard2_mipi: hummingboard2_mipi { ++ fsl,pins = < ++ MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x4001b8b1 ++ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x4001b8b1 ++ MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 ++ >; ++ }; ++ ++ pinctrl_hummingboard2_pcie_reset: hummingboard2-pcie-reset { ++ fsl,pins = < ++ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b1 ++ >; ++ }; ++ ++ pinctrl_hummingboard2_pwm1: pwm1grp { ++ fsl,pins = < ++ MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1 ++ >; ++ }; ++ ++ pinctrl_hummingboard2_sgtl5000: hummingboard2-sgtl5000 { ++ fsl,pins = < ++ MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 ++ MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 ++ MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 ++ MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 ++ MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 ++ >; ++ }; ++ ++ pinctrl_hummingboard2_usbh1_vbus: hummingboard2-usbh1-vbus { ++ fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; ++ }; ++ ++ pinctrl_hummingboard2_usbh2_vbus: hummingboard2-usbh2-vbus { ++ fsl,pins = <MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0>; ++ }; ++ ++ pinctrl_hummingboard2_usbh3_vbus: hummingboard2-usbh3-vbus { ++ fsl,pins = <MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x1b0b0>; ++ }; ++ ++ pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-id { ++ /* ++ * Similar to pinctrl_usbotg_2, but we want it ++ * pulled down for a fixed host connection. ++ */ ++ fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; ++ }; ++ ++ pinctrl_hummingboard2_usbotg_vbus: hummingboard2-usbotg-vbus { ++ fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; ++ }; ++ ++ pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-aux { ++ fsl,pins = < ++ MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071 ++ MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 ++ >; ++ }; ++ ++ pinctrl_hummingboard2_usdhc2: hummingboard2-usdhc2 { ++ fsl,pins = < ++ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 ++ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 ++ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 ++ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 ++ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 ++ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 ++ >; ++ }; ++ ++ pinctrl_hummingboard2_usdhc2_100mhz: hummingboard2-usdhc2-100mhz { ++ fsl,pins = < ++ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 ++ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 ++ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 ++ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 ++ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 ++ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9 ++ >; ++ }; ++ ++ pinctrl_hummingboard2_usdhc2_200mhz: hummingboard2-usdhc2-200mhz { ++ fsl,pins = < ++ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 ++ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 ++ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 ++ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 ++ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 ++ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9 ++ >; ++ }; ++ ++ pinctrl_hummingboard2_vmmc: hummingboard2-vmmc { ++ fsl,pins = < ++ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 ++ >; ++ }; ++ ++ pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3 { ++ fsl,pins = < ++ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 ++ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 ++ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 ++ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 ++ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 ++ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 ++ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 ++ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 ++ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 ++ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 ++ MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 ++ >; ++ }; ++ ++ pinctrl_hummingboard2_uart3: hummingboard2-uart3 { ++ fsl,pins = < ++ MX6QDL_PAD_EIM_D25__UART3_TX_DATA 0x1b0b1 ++ MX6QDL_PAD_EIM_D24__UART3_RX_DATA 0x40013000 ++ >; ++ }; ++ ++ pinctrl_hummingboard2_ecspi2: hummingboard2-ecspi2grp { ++ fsl,pins = < ++ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 ++ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 ++ MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 ++ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 /* CS */ ++ >; ++ }; ++ }; ++}; ++ ++&ldb { ++ status = "disabled"; ++ ++ lvds-channel@0 { ++ fsl,data-mapping = "spwg"; ++ fsl,data-width = <18>; ++ }; ++}; ++ ++&pcie { ++ pinctrl-names = "default"; ++ pinctrl-0 = < ++ &pinctrl_hummingboard2_pcie_reset ++ >; ++ reset-gpio = <&gpio2 11 0>; ++ status = "okay"; ++}; ++ ++&pwm1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hummingboard2_pwm1>; ++ status = "okay"; ++}; ++ ++&pwm3 { ++ status = "disabled"; ++}; ++ ++&pwm4 { ++ status = "disabled"; ++}; ++ ++&ssi1 { ++ fsl,mode = "i2s-slave"; ++ status = "okay"; ++}; ++ ++&usbh1 { ++ disable-over-current; ++ vbus-supply = <®_usbh1_vbus>; ++ status = "okay"; ++}; ++ ++&usbotg { ++ disable-over-current; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hummingboard2_usbotg_id>; ++ vbus-supply = <®_usbotg_vbus>; ++ status = "okay"; ++}; ++ ++&usdhc2 { ++ pinctrl-names = "default", "state_100mhz", "state_200mhz"; ++ pinctrl-0 = < ++ &pinctrl_hummingboard2_usdhc2_aux ++ &pinctrl_hummingboard2_usdhc2 ++ >; ++ pinctrl-1 = < ++ &pinctrl_hummingboard2_usdhc2_aux ++ &pinctrl_hummingboard2_usdhc2_100mhz ++ >; ++ pinctrl-2 = < ++ &pinctrl_hummingboard2_usdhc2_aux ++ &pinctrl_hummingboard2_usdhc2_200mhz ++ >; ++ vmmc-supply = <®_usdhc2_vmmc>; ++ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; ++ status = "okay"; ++}; ++ ++&usdhc3 { ++ pinctrl-names = "default"; ++ pinctrl-0 = < ++ &pinctrl_hummingboard2_usdhc3 ++ >; ++ vmmc-supply = <®_3p3v>; ++ vqmmc-supply = <®_3p3v>; ++ bus-width = <8>; ++ non-removable; ++ status = "okay"; ++}; ++ ++&uart3 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_hummingboard2_uart3>; ++ status = "okay"; ++}; +-- +2.9.3 + |