diff options
Diffstat (limited to 'arm-dts-sun7i-bananapi.patch')
| -rw-r--r-- | arm-dts-sun7i-bananapi.patch | 209 |
1 files changed, 209 insertions, 0 deletions
diff --git a/arm-dts-sun7i-bananapi.patch b/arm-dts-sun7i-bananapi.patch new file mode 100644 index 000000000..4fff64b2d --- /dev/null +++ b/arm-dts-sun7i-bananapi.patch @@ -0,0 +1,209 @@ +The Banana Pi is an A20 based development board using Raspberry Pi compatible +IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi +and stereo audio out + various expenansion headers: + + +Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/sun7i-a20-bananapi.dts | 177 +++++++++++++++++++++++++++++++ + 2 files changed, 184 insertions(+) + create mode 100644 arch/arm/boot/dts/sun7i-a20-bananapi.dts + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index bdbc84a..440e037 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -379,6 +379,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ + sun6i-a31-hummingbird.dtb \ + sun6i-a31-m9.dtb + dtb-$(CONFIG_MACH_SUN7I) += \ ++ sun7i-a20-bananapi.dtb \ + sun7i-a20-cubieboard2.dtb \ + sun7i-a20-cubietruck.dtb \ + sun7i-a20-i12-tvbox.dtb \ +diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts +new file mode 100644 +index 0000000..0332b82 +--- /dev/null ++++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts +@@ -0,0 +1,177 @@ ++/* ++ * Copyright 2014 Hans de Goede <hdegoede@xxxxxxxxxx> ++ * ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++/dts-v1/; ++/include/ "sun7i-a20.dtsi" ++/include/ "sunxi-common-regulators.dtsi" ++ ++/ { ++ model = "LeMaker Banana Pi"; ++ compatible = "lemaker,bananapi", "allwinner,sun7i-a20"; ++ ++ soc@01c00000 { ++ mmc0: mmc@01c0f000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; ++ vmmc-supply = <®_vcc3v3>; ++ bus-width = <4>; ++ cd-gpios = <&pio 7 10 0>; /* PH10 */ ++ cd-inverted; ++ status = "okay"; ++ }; ++ ++ usbphy: phy@01c13400 { ++ usb1_vbus-supply = <®_usb1_vbus>; ++ usb2_vbus-supply = <®_usb2_vbus>; ++ status = "okay"; ++ }; ++ ++ ehci0: usb@01c14000 { ++ status = "okay"; ++ }; ++ ++ ohci0: usb@01c14400 { ++ status = "okay"; ++ }; ++ ++ ahci: sata@01c18000 { ++ status = "okay"; ++ }; ++ ++ ehci1: usb@01c1c000 { ++ status = "okay"; ++ }; ++ ++ ohci1: usb@01c1c400 { ++ status = "okay"; ++ }; ++ ++ pinctrl@01c20800 { ++ uart3_pins_bananapi: uart3_pin@0 { ++ allwinner,pins = "PH0", "PH1"; ++ allwinner,function = "uart3"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { ++ allwinner,pins = "PH10"; ++ allwinner,function = "gpio_in"; ++ allwinner,drive = <0>; ++ allwinner,pull = <1>; ++ }; ++ ++ gmac_power_pin_bananapi: gmac_power_pin@0 { ++ allwinner,pins = "PH23"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ led_pins_bananapi: led_pins@0 { ++ allwinner,pins = "PH24"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ }; ++ ++ ir0: ir@01c21800 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&ir0_pins_a>; ++ status = "okay"; ++ }; ++ ++ uart0: serial@01c28000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins_a>; ++ status = "okay"; ++ }; ++ ++ uart3: serial@01c28c00 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart3_pins_bananapi>; ++ status = "okay"; ++ }; ++ ++ uart7: serial@01c29c00 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart7_pins_a>; ++ status = "okay"; ++ }; ++ ++ i2c0: i2c@01c2ac00 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins_a>; ++ status = "okay"; ++ ++ axp209: pmic@34 { ++ compatible = "x-powers,axp209"; ++ reg = <0x34>; ++ interrupt-parent = <&nmi_intc>; ++ interrupts = <0 8>; ++ ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ }; ++ }; ++ ++ i2c2: i2c@01c2b400 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c2_pins_a>; ++ status = "okay"; ++ }; ++ ++ gmac: ethernet@01c50000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac_pins_rgmii_a>; ++ phy = <&phy1>; ++ phy-mode = "rgmii"; ++ phy-supply = <®_gmac_3v3>; ++ status = "okay"; ++ ++ phy1: ethernet-phy@1 { ++ reg = <1>; ++ }; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&led_pins_bananapi>; ++ ++ green { ++ label = "bananapi:green:usr"; ++ gpios = <&pio 7 24 0>; ++ }; ++ }; ++ ++ reg_usb1_vbus: usb1-vbus { ++ status = "okay"; ++ }; ++ ++ reg_usb2_vbus: usb2-vbus { ++ status = "okay"; ++ }; ++ ++ reg_gmac_3v3: gmac-3v3 { ++ compatible = "regulator-fixed"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac_power_pin_bananapi>; ++ regulator-name = "gmac-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ startup-delay-us = <50000>; ++ enable-active-high; ++ gpio = <&pio 7 23 0>; ++ }; ++}; +-- +2.0.0 |