summaryrefslogtreecommitdiffstats
path: root/arm-dts-armada388-helios4.patch
diff options
context:
space:
mode:
Diffstat (limited to 'arm-dts-armada388-helios4.patch')
-rw-r--r--arm-dts-armada388-helios4.patch352
1 files changed, 0 insertions, 352 deletions
diff --git a/arm-dts-armada388-helios4.patch b/arm-dts-armada388-helios4.patch
deleted file mode 100644
index abfbbc299..000000000
--- a/arm-dts-armada388-helios4.patch
+++ /dev/null
@@ -1,352 +0,0 @@
-From ced8025b569e21c31b52cc80410ed49d0bf13368 Mon Sep 17 00:00:00 2001
-From: Dennis Gilmore <dennis@ausil.us>
-Date: Tue, 5 Jun 2018 17:15:45 -0500
-Subject: ARM: dts: armada388-helios4
-
-The helios4 is a Armada388 based nas board designed by SolidRun and
-based on their SOM. It is sold by kobol.io the dts file came from
-https://raw.githubusercontent.com/armbian/build/master/patch/kernel/mvebu-default/95-helios4-device-tree.patch
-I added a SPDX license line to match the clearfog it says it was based
-on and a compatible line for "kobol,helios4"
-
-Signed-off-by: Dennis Gilmore <dennis@ausil.us>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/armada-388-helios4.dts | 313 +++++++++++++++++++++++++++++++
- 2 files changed, 314 insertions(+)
- create mode 100644 arch/arm/boot/dts/armada-388-helios4.dts
-
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 37a3de760d40..55133fac83ab 100644
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -1138,6 +1138,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
- armada-388-clearfog-pro.dtb \
- armada-388-db.dtb \
- armada-388-gp.dtb \
-+ armada-388-helios4.dtb \
- armada-388-rd.dtb
- dtb-$(CONFIG_MACH_ARMADA_39X) += \
- armada-398-db.dtb
-diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts
-new file mode 100644
-index 000000000000..705adfa8c680
---- /dev/null
-+++ b/arch/arm/boot/dts/armada-388-helios4.dts
-@@ -0,0 +1,313 @@
-+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-+/*
-+ * Device Tree file for Helios4
-+ * based on SolidRun Clearfog revision A1 rev 2.0 (88F6828)
-+ *
-+ * Copyright (C) 2017 Aditya Prayoga <aditya@kobol.io>
-+ *
-+ */
-+
-+/dts-v1/;
-+#include "armada-388.dtsi"
-+#include "armada-38x-solidrun-microsom.dtsi"
-+
-+/ {
-+ model = "Helios4";
-+ compatible = "kobol,helios4", "marvell,armada388",
-+ "marvell,armada385", "marvell,armada380";
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x80000000>; /* 2 GB */
-+ };
-+
-+ aliases {
-+ /* So that mvebu u-boot can update the MAC addresses */
-+ ethernet1 = &eth0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ reg_12v: regulator-12v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "power_brick_12V";
-+ regulator-min-microvolt = <12000000>;
-+ regulator-max-microvolt = <12000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: regulator-3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ vin-supply = <&reg_12v>;
-+ };
-+
-+ reg_5p0v_hdd: regulator-5v-hdd {
-+ compatible = "regulator-fixed";
-+ regulator-name = "5V_HDD";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ vin-supply = <&reg_12v>;
-+ };
-+
-+ reg_5p0v_usb: regulator-5v-usb {
-+ compatible = "regulator-fixed";
-+ regulator-name = "USB-PWR";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ enable-active-high;
-+ gpio = <&expander0 6 GPIO_ACTIVE_HIGH>;
-+ vin-supply = <&reg_12v>;
-+ };
-+
-+ system-leds {
-+ compatible = "gpio-leds";
-+ status-led {
-+ label = "helios4:green:status";
-+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "heartbeat";
-+ default-state = "on";
-+ };
-+
-+ fault-led {
-+ label = "helios4:red:fault";
-+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-+ default-state = "keep";
-+ };
-+ };
-+
-+ io-leds {
-+ compatible = "gpio-leds";
-+ sata1-led {
-+ label = "helios4:green:ata1";
-+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "ata1";
-+ default-state = "off";
-+ };
-+ sata2-led {
-+ label = "helios4:green:ata2";
-+ gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "ata2";
-+ default-state = "off";
-+ };
-+ sata3-led {
-+ label = "helios4:green:ata3";
-+ gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "ata3";
-+ default-state = "off";
-+ };
-+ sata4-led {
-+ label = "helios4:green:ata4";
-+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "ata4";
-+ default-state = "off";
-+ };
-+ usb-led {
-+ label = "helios4:green:usb";
-+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "usb-host";
-+ default-state = "off";
-+ };
-+ };
-+
-+ fan1: j10-pwm {
-+ compatible = "pwm-fan";
-+ pwms = <&gpio1 9 40000>; /* Target freq:25 kHz */
-+ };
-+
-+ fan2: j17-pwm {
-+ compatible = "pwm-fan";
-+ pwms = <&gpio1 23 40000>; /* Target freq:25 kHz */
-+ };
-+
-+ usb2_phy: usb2-phy {
-+ compatible = "usb-nop-xceiv";
-+ vbus-regulator = <&reg_5p0v_usb>;
-+ };
-+
-+ usb3_phy: usb3-phy {
-+ compatible = "usb-nop-xceiv";
-+ };
-+
-+ soc {
-+ internal-regs {
-+ i2c@11000 {
-+ clock-frequency = <400000>;
-+ pinctrl-0 = <&i2c0_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ /*
-+ * PCA9655 GPIO expander, up to 1MHz clock.
-+ * 0-Board Revision bit 0 #
-+ * 1-Board Revision bit 1 #
-+ * 5-USB3 overcurrent
-+ * 6-USB3 power
-+ */
-+ expander0: gpio-expander@20 {
-+ /*
-+ * This is how it should be:
-+ * compatible = "onnn,pca9655",
-+ * "nxp,pca9555";
-+ * but you can't do this because of
-+ * the way I2C works.
-+ */
-+ compatible = "nxp,pca9555";
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ reg = <0x20>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pca0_pins>;
-+ interrupt-parent = <&gpio0>;
-+ interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+
-+ board_rev_bit_0 {
-+ gpio-hog;
-+ gpios = <0 GPIO_ACTIVE_LOW>;
-+ input;
-+ line-name = "board-rev-0";
-+ };
-+ board_rev_bit_1 {
-+ gpio-hog;
-+ gpios = <1 GPIO_ACTIVE_LOW>;
-+ input;
-+ line-name = "board-rev-1";
-+ };
-+ usb3_ilimit {
-+ gpio-hog;
-+ gpios = <5 GPIO_ACTIVE_HIGH>;
-+ input;
-+ line-name = "usb-overcurrent-status";
-+ };
-+ };
-+
-+ temp_sensor: temp@4c {
-+ compatible = "ti,lm75";
-+ reg = <0x4c>;
-+ vcc-supply = <&reg_3p3v>;
-+ };
-+ };
-+
-+ i2c@11100 {
-+ /*
-+ * External I2C Bus for user peripheral
-+ */
-+ clock-frequency = <400000>;
-+ pinctrl-0 = <&helios_i2c1_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+ };
-+
-+ sata@a8000 {
-+ status = "okay";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sata0: sata-port@0 {
-+ reg = <0>;
-+ };
-+
-+ sata1: sata-port@1 {
-+ reg = <1>;
-+ };
-+ };
-+
-+ sata@e0000 {
-+ status = "okay";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sata2: sata-port@0 {
-+ reg = <0>;
-+ };
-+
-+ sata3: sata-port@1 {
-+ reg = <1>;
-+ };
-+ };
-+
-+ spi@10680 {
-+ pinctrl-0 = <&spi1_pins
-+ &microsom_spi1_cs_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+ };
-+
-+ sdhci@d8000 {
-+ bus-width = <4>;
-+ cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-+ no-1-8-v;
-+ pinctrl-0 = <&helios_sdhci_pins
-+ &helios_sdhci_cd_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+ vmmc = <&reg_3p3v>;
-+ wp-inverted;
-+ };
-+
-+ usb@58000 {
-+ usb-phy = <&usb2_phy>;
-+ status = "okay";
-+ };
-+
-+ usb3@f0000 {
-+ status = "okay";
-+ };
-+
-+ usb3@f8000 {
-+ status = "okay";
-+ };
-+
-+ pinctrl@18000 {
-+ pca0_pins: pca0-pins {
-+ marvell,pins = "mpp23";
-+ marvell,function = "gpio";
-+ };
-+ microsom_phy0_int_pins: microsom-phy0-int-pins {
-+ marvell,pins = "mpp18";
-+ marvell,function = "gpio";
-+ };
-+ helios_i2c1_pins: i2c1-pins {
-+ marvell,pins = "mpp26", "mpp27";
-+ marvell,function = "i2c1";
-+ };
-+ helios_sdhci_cd_pins: helios-sdhci-cd-pins {
-+ marvell,pins = "mpp20";
-+ marvell,function = "gpio";
-+ };
-+ helios_sdhci_pins: helios-sdhci-pins {
-+ marvell,pins = "mpp21", "mpp28",
-+ "mpp37", "mpp38",
-+ "mpp39", "mpp40";
-+ marvell,function = "sd0";
-+ };
-+ helios_led_pins: helios-led-pins {
-+ marvell,pins = "mpp24", "mpp25",
-+ "mpp49", "mpp50",
-+ "mpp52", "mpp53",
-+ "mpp54";
-+ marvell,function = "gpio";
-+ };
-+ helios_fan_pins: helios-fan-pins {
-+ marvell,pins = "mpp41", "mpp43",
-+ "mpp48", "mpp55";
-+ marvell,function = "gpio";
-+ };
-+ microsom_spi1_cs_pins: spi1-cs-pins {
-+ marvell,pins = "mpp59";
-+ marvell,function = "spi1";
-+ };
-+ };
-+ };
-+ };
-+};
---
-cgit 1.2-0.3.lf.el7
generated by cgit (git 2.34.1) at 2024-06-07 14:38:57 +0000