summaryrefslogtreecommitdiffstats
path: root/arm-beagle.patch
diff options
context:
space:
mode:
Diffstat (limited to 'arm-beagle.patch')
-rw-r--r--arm-beagle.patch460
1 files changed, 0 insertions, 460 deletions
diff --git a/arm-beagle.patch b/arm-beagle.patch
deleted file mode 100644
index 5e2d8abdc..000000000
--- a/arm-beagle.patch
+++ /dev/null
@@ -1,460 +0,0 @@
-Bugzilla: 1012025
-Upstream-status: In beagle github repository https://github.com/beagleboard/kernel
-
-From b5a2528c89fc8049b2a6a750634c14983e33d00f Mon Sep 17 00:00:00 2001
-From: Robert Nelson <robertcnelson@gmail.com>
-Date: Fri, 27 Dec 2013 13:05:09 -0600
-Subject: [PATCH] arm: dts: am335x-boneblack: lcdc add panel-info
-
-Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
----
- arch/arm/boot/dts/am335x-boneblack.dts | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
-diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
-index 6b71ad9..09ffbd8 100644
---- a/arch/arm/boot/dts/am335x-boneblack.dts
-+++ b/arch/arm/boot/dts/am335x-boneblack.dts
-@@ -74,5 +74,18 @@
- pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
- pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
- status = "okay";
-+
-+ panel-info {
-+ bpp = <16>;
-+ ac-bias = <255>;
-+ ac-bias-intrpt = <0>;
-+ dma-burst-sz = <16>;
-+ fdd = <16>;
-+ sync-edge = <1>;
-+ sync-ctrl = <1>;
-+ raster-order = <0>;
-+ fifo-th = <0>;
-+ invert-pxl-clk;
-+ };
- };
- };
---
-1.8.5.1
-
-From 1da083a002581520dd358b8b8e097078000d12b9 Mon Sep 17 00:00:00 2001
-From: Robert Nelson <robertcnelson@gmail.com>
-Date: Fri, 27 Dec 2013 13:14:19 -0600
-Subject: [PATCH 2/2] arm: dts: am335x-boneblack: add cpu0 opp points
-
-Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
----
- arch/arm/boot/dts/am335x-boneblack.dts | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
-diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
-index 09ffbd8..f213ccd 100644
---- a/arch/arm/boot/dts/am335x-boneblack.dts
-+++ b/arch/arm/boot/dts/am335x-boneblack.dts
-@@ -67,6 +67,24 @@
- };
-
- / {
-+ cpus {
-+ cpu@0 {
-+ cpu0-supply = <&dcdc2_reg>;
-+ /*
-+ * To consider voltage drop between PMIC and SoC,
-+ * tolerance value is reduced to 2% from 4% and
-+ * voltage value is increased as a precaution.
-+ */
-+ operating-points = <
-+ /* kHz uV */
-+ 1000000 1325000
-+ 800000 1300000
-+ 600000 1112000
-+ 300000 969000
-+ >;
-+ };
-+ };
-+
- hdmi {
- compatible = "ti,tilcdc,slave";
- i2c = <&i2c0>;
---
-1.8.5.1
-
-From 8551d8aa7d3e002da2097e7e902fb96fceb8694e Mon Sep 17 00:00:00 2001
-From: Robert Nelson <robertcnelson@gmail.com>
-Date: Tue, 31 Dec 2013 11:17:45 -0600
-Subject: [PATCH 3/3] arm: dts: am335x-bone-common: enable and use i2c2
-
-Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
----
- arch/arm/boot/dts/am335x-bone-common.dtsi | 39 +++++++++++++++++++++++++++++++
- 1 file changed, 39 insertions(+)
-
-diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
-index e3f27ec..54366b6 100644
---- a/arch/arm/boot/dts/am335x-bone-common.dtsi
-+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
-@@ -84,6 +84,13 @@
- >;
- };
-
-+ i2c2_pins: pinmux_i2c2_pins {
-+ pinctrl-single,pins = <
-+ 0x178 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_ctsn.i2c2_sda */
-+ 0x17c 0x73 /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) uart1_rtsn.i2c2_scl */
-+ >;
-+ };
-+
- uart0_pins: pinmux_uart0_pins {
- pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
-@@ -220,6 +227,38 @@
- reg = <0x24>;
- };
-
-+ baseboard_eeprom: baseboard_eeprom@50 {
-+ compatible = "at,24c256";
-+ reg = <0x50>;
-+ };
-+};
-+
-+&i2c2 {
-+ status = "okay";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c2_pins>;
-+
-+ clock-frequency = <100000>;
-+
-+ cape_eeprom0: cape_eeprom0@54 {
-+ compatible = "at,24c256";
-+ reg = <0x54>;
-+ };
-+
-+ cape_eeprom1: cape_eeprom1@55 {
-+ compatible = "at,24c256";
-+ reg = <0x55>;
-+ };
-+
-+ cape_eeprom2: cape_eeprom2@56 {
-+ compatible = "at,24c256";
-+ reg = <0x56>;
-+ };
-+
-+ cape_eeprom3: cape_eeprom3@57 {
-+ compatible = "at,24c256";
-+ reg = <0x57>;
-+ };
- };
-
- /include/ "tps65217.dtsi"
---
-1.8.5.2
-
-From a3099dc53a47d1694a5b575580ec3406dc429bf8 Mon Sep 17 00:00:00 2001
-From: Robert Nelson <robertcnelson@gmail.com>
-Date: Tue, 31 Dec 2013 14:18:00 -0600
-Subject: [PATCH 4/4] arm: dts: am335x-bone-common: setup default pinmux
- http://elinux.org/Basic_Proto_Cape
-
-Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
----
- arch/arm/boot/dts/am335x-bone-common.dtsi | 130 ++++++++++++++++++++++++++++++
- 1 file changed, 130 insertions(+)
-
-diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
-index e4571af..f85cabc 100644
---- a/arch/arm/boot/dts/am335x-bone-common.dtsi
-+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
-@@ -98,6 +98,13 @@
- >;
- };
-
-+ uart1_pins: pinmux_uart1_pins {
-+ pinctrl-single,pins = <
-+ 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
-+ 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
-+ >;
-+ };
-+
- clkout2_pin: pinmux_clkout2_pin {
- pinctrl-single,pins = <
- 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
-@@ -178,6 +185,33 @@
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
- >;
- };
-+
-+ spi0_pins: pinmux_spi0_pins {
-+ pinctrl-single,pins = <
-+ 0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
-+ 0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
-+ 0x158 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
-+ 0x15c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
-+ >;
-+ };
-+
-+ ehrpwm1_pin_p9_14: pinmux_ehrpwm1_pin_p9_14 {
-+ pinctrl-single,pins = <
-+ 0x048 0x6 /* P9_14 (ZCZ ball U14) | MODE 6 */
-+ >;
-+ };
-+
-+ ehrpwm1_pin_p9_16: pinmux_ehrpwm1_pin_p9_16 {
-+ pinctrl-single,pins = <
-+ 0x04c 0x6 /* P9_16 (ZCZ ball T14) | MODE 6 */
-+ >;
-+ };
-+
-+ ecap0_pin_p9_42: pinmux_ecap0_pin_p9_42 {
-+ pinctrl-single,pins = <
-+ 0x164 0x0 /* P9_42 (ZCZ ball C18) | MODE 0 */
-+ >;
-+ };
- };
-
- &uart0 {
-@@ -187,6 +221,13 @@
- status = "okay";
- };
-
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart1_pins>;
-+
-+ status = "okay";
-+};
-+
- &usb {
- status = "okay";
-
-@@ -261,6 +302,56 @@
- };
- };
-
-+&epwmss0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ecap0_pin_p9_42>;
-+ status = "okay";
-+
-+ ecap@48300100 {
-+ status = "okay";
-+ };
-+};
-+
-+&epwmss1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <
-+ &ehrpwm1_pin_p9_14
-+ &ehrpwm1_pin_p9_16
-+ >;
-+
-+ status = "okay";
-+
-+ ehrpwm@48302200 {
-+ status = "okay";
-+ };
-+};
-+
-+&spi0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi0_pins>;
-+ status = "okay";
-+
-+ spidev0: spi@0 {
-+ compatible = "spidev";
-+ reg = <0>;
-+ spi-max-frequency = <16000000>;
-+ spi-cpha;
-+ };
-+
-+ spidev1: spi@1 {
-+ compatible = "spidev";
-+ reg = <1>;
-+ spi-max-frequency = <16000000>;
-+ };
-+};
-+
-+&tscadc {
-+ status = "okay";
-+ adc {
-+ ti,adc-channels = <4 5 6>;
-+ };
-+};
-+
- /include/ "tps65217.dtsi"
-
- &tps {
-@@ -336,3 +427,42 @@
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
- };
-+
-+/ {
-+ ocp {
-+ //FIXME: these pwm's still need work, this guild isn't working..
-+ //http://elinux.org/EBC_Exercise_13_Pulse_Width_Modulation
-+ pwm_test_P9_14@0 {
-+ compatible = "pwm_test";
-+ pwms = <&ehrpwm1 0 500000 1>;
-+ pwm-names = "PWM_P9_14";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ehrpwm1_pin_p9_14>;
-+ enabled = <1>;
-+ duty = <0>;
-+ status = "okay";
-+ };
-+
-+ pwm_test_P9_16@0 {
-+ compatible = "pwm_test";
-+ pwms = <&ehrpwm1 0 500000 1>;
-+ pwm-names = "PWM_P9_16";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ehrpwm1_pin_p9_16>;
-+ enabled = <1>;
-+ duty = <0>;
-+ status = "okay";
-+ };
-+
-+ pwm_test_P9_42 {
-+ compatible = "pwm_test";
-+ pwms = <&ecap0 0 500000 1>;
-+ pwm-names = "PWM_P9_42";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ecap0_pin_p9_42>;
-+ enabled = <1>;
-+ duty = <0>;
-+ status = "okay";
-+ };
-+ };
-+};
---
-1.8.5.2
-
-From b6e2c817edfc6d73874cf833daffe1be6c7ed8bb Mon Sep 17 00:00:00 2001
-From: Robert Nelson <robertcnelson@gmail.com>
-Date: Thu, 13 Mar 2014 14:18:52 -0500
-Subject: [PATCH] arm: dts: am335x-bone-common: add
- uart2_pins/uart4_pins/uart5_pins
-
-Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
----
- arch/arm/boot/dts/am335x-bone-common.dtsi | 21 +++++++++++++++++++++
- 1 file changed, 21 insertions(+)
-
-diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
-index f85cabc..5270d18 100644
---- a/arch/arm/boot/dts/am335x-bone-common.dtsi
-+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
-@@ -105,6 +105,27 @@
- >;
- };
-
-+ uart2_pins: pinmux_uart2_pins {
-+ pinctrl-single,pins = <
-+ 0x150 0x21 /* spi0_sclk.uart2_rxd | MODE1 */
-+ 0x154 0x01 /* spi0_d0.uart2_txd | MODE1 */
-+ >;
-+ };
-+
-+ uart4_pins: pinmux_uart4_pins {
-+ pinctrl-single,pins = <
-+ 0x070 0x26 /* gpmc_wait0.uart4_rxd | MODE6 */
-+ 0x074 0x06 /* gpmc_wpn.uart4_txd | MODE6 */
-+ >;
-+ };
-+
-+ uart5_pins: pinmux_uart5_pins {
-+ pinctrl-single,pins = <
-+ 0x0C4 0x24 /* lcd_data9.uart5_rxd | MODE4 */
-+ 0x0C0 0x04 /* lcd_data8.uart5_txd | MODE4 */
-+ >;
-+ };
-+
- clkout2_pin: pinmux_clkout2_pin {
- pinctrl-single,pins = <
- 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
---
-1.9.0
-
-From 72567452d5d6007010597158f6afd00e2bf07579 Mon Sep 17 00:00:00 2001
-From: Pantelis Antoniou <panto@antoniou-consulting.com>
-Date: Sat, 15 Sep 2012 12:00:41 +0300
-Subject: [PATCH] pinctrl: pinctrl-single must be initialized early.
-
-When using pinctrl-single to handle i2c initialization, it has
-to be done early. Whether this is the best way to do so, is an
-exercise left to the reader.
----
- drivers/pinctrl/pinctrl-single.c | 12 +++++++++++-
- 1 file changed, 11 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
-index 829b98c..5107dcf 100644
---- a/drivers/pinctrl/pinctrl-single.c
-+++ b/drivers/pinctrl/pinctrl-single.c
-@@ -2039,7 +2039,17 @@ static struct platform_driver pcs_driver = {
- #endif
- };
-
--module_platform_driver(pcs_driver);
-+static int __init pcs_init(void)
-+{
-+ return platform_driver_register(&pcs_driver);
-+}
-+postcore_initcall(pcs_init);
-+
-+static void __exit pcs_exit(void)
-+{
-+ platform_driver_unregister(&pcs_driver);
-+}
-+module_exit(pcs_exit);
-
- MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
- MODULE_DESCRIPTION("One-register-per-pin type device tree based pinctrl driver");
---
-1.8.5.2
-
-From b6e2c817edfc6d73874cf833daffe1be6c7ed8bb Mon Sep 17 00:00:00 2001
-From: Robert Nelson <robertcnelson@gmail.com>
-Date: Thu, 13 Mar 2014 14:18:52 -0500
-Subject: [PATCH] arm: dts: am335x-bone-common: add
- uart2_pins/uart4_pins/uart5_pins
-
-Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
----
- arch/arm/boot/dts/am335x-bone-common.dtsi | 21 +++++++++++++++++++++
- 1 file changed, 21 insertions(+)
-
-diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
-index f85cabc..5270d18 100644
---- a/arch/arm/boot/dts/am335x-bone-common.dtsi
-+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
-@@ -105,6 +105,27 @@
- >;
- };
-
-+ uart2_pins: pinmux_uart2_pins {
-+ pinctrl-single,pins = <
-+ 0x150 0x21 /* spi0_sclk.uart2_rxd | MODE1 */
-+ 0x154 0x01 /* spi0_d0.uart2_txd | MODE1 */
-+ >;
-+ };
-+
-+ uart4_pins: pinmux_uart4_pins {
-+ pinctrl-single,pins = <
-+ 0x070 0x26 /* gpmc_wait0.uart4_rxd | MODE6 */
-+ 0x074 0x06 /* gpmc_wpn.uart4_txd | MODE6 */
-+ >;
-+ };
-+
-+ uart5_pins: pinmux_uart5_pins {
-+ pinctrl-single,pins = <
-+ 0x0C4 0x24 /* lcd_data9.uart5_rxd | MODE4 */
-+ 0x0C0 0x04 /* lcd_data8.uart5_txd | MODE4 */
-+ >;
-+ };
-+
- clkout2_pin: pinmux_clkout2_pin {
- pinctrl-single,pins = <
- 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
---
-1.9.0
generated by cgit (git 2.34.1) at 2024-11-19 22:02:30 +0000