summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--0001-PCI-Add-MCFG-quirks-for-Tegra194-host-controllers.patch209
-rw-r--r--0001-arm64-allwinner-dts-a64-add-LCD-related-device-nodes.patch81
-rw-r--r--0001-drm-panel-add-Xingbangda-XBD599-panel.patch423
-rw-r--r--0001-drm-sun4i-sun6i_mipi_dsi-fix-horizontal-timing-calcu.patch59
-rw-r--r--0001-dt-bindings-Add-doc-for-Pine64-Pinebook-Pro.patch32
-rw-r--r--0001-dt-bindings-panel-add-binding-for-Xingbangda-XBD599-.patch74
-rw-r--r--0001-dt-bindings-vendor-prefixes-Add-Xingbangda.patch33
-rw-r--r--0001-usb-fusb302-Convert-to-use-GPIO-descriptors.patch162
-rw-r--r--0002-dt-bindings-panel-Convert-rocktech-jh057n00900-to-ya.patch120
-rw-r--r--0003-dt-bindings-panel-Add-compatible-for-Xingbangda-XBD5.patch37
-rw-r--r--0004-drm-panel-rocktech-jh057n00900-Rename-the-driver-to-.patch91
-rw-r--r--0005-drm-panel-st7703-Rename-functions-from-jh057n-prefix.patch265
-rw-r--r--0006-drm-panel-st7703-Prepare-for-supporting-multiple-pan.patch129
-rw-r--r--0007-drm-panel-st7703-Move-code-specific-to-jh057n-closer.patch84
-rw-r--r--0008-drm-panel-st7703-Move-generic-part-of-init-sequence-.patch84
-rw-r--r--0009-drm-panel-st7703-Add-support-for-Xingbangda-XBD599.patch251
-rw-r--r--0010-drm-panel-st7703-Enter-sleep-after-display-off.patch41
-rw-r--r--0011-drm-panel-st7703-Assert-reset-prior-to-powering-down.patch29
-rw-r--r--0012-arm64-dts-sun50i-a64-pinephone-Enable-LCD-support-on.patch112
-rw-r--r--0013-arm64-dts-sun50i-a64-pinephone-Add-touchscreen-suppo.patch47
-rw-r--r--configs/fedora/generic/CONFIG_DRM_PANEL_ROCKTECH_JH057N009001
-rw-r--r--configs/fedora/generic/CONFIG_DRM_PANEL_SITRONIX_ST77031
-rw-r--r--configs/fedora/generic/CONFIG_DRM_PANEL_XINGBANGDA_XBD5991
-rw-r--r--configs/fedora/generic/CONFIG_SERIAL_SC16IS7XX_I2C2
-rw-r--r--configs/fedora/generic/arm/aarch64/CONFIG_DRM_PANEL_XINGBANGDA_XBD5991
-rw-r--r--kernel-aarch64-debug-fedora.config5
-rw-r--r--kernel-aarch64-fedora.config5
-rw-r--r--kernel-armv7hl-debug-fedora.config5
-rw-r--r--kernel-armv7hl-fedora.config5
-rw-r--r--kernel-armv7hl-lpae-debug-fedora.config5
-rw-r--r--kernel-armv7hl-lpae-fedora.config5
-rw-r--r--kernel-i686-debug-fedora.config5
-rw-r--r--kernel-i686-fedora.config5
-rw-r--r--kernel-ppc64le-debug-fedora.config5
-rw-r--r--kernel-ppc64le-fedora.config5
-rw-r--r--kernel-s390x-debug-fedora.config5
-rw-r--r--kernel-s390x-fedora.config5
-rw-r--r--kernel-x86_64-debug-fedora.config5
-rw-r--r--kernel-x86_64-fedora.config5
-rw-r--r--kernel.spec23
40 files changed, 1742 insertions, 720 deletions
diff --git a/0001-PCI-Add-MCFG-quirks-for-Tegra194-host-controllers.patch b/0001-PCI-Add-MCFG-quirks-for-Tegra194-host-controllers.patch
new file mode 100644
index 000000000..6fc81f845
--- /dev/null
+++ b/0001-PCI-Add-MCFG-quirks-for-Tegra194-host-controllers.patch
@@ -0,0 +1,209 @@
+From 92c547f35f4852908f40c2861d9b9d10e0c5099b Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Sun, 28 Jun 2020 16:48:50 +0100
+Subject: [PATCH] PCI: Add MCFG quirks for Tegra194 host controllers
+
+The PCIe controller in Tegra194 SoC is not completely ECAM-compliant.
+With the current hardware design limitations in place, ECAM can be enabled
+only for one controller (C5 controller to be precise) with bus numbers
+starting from 160 instead of 0. A different approach is taken to avoid this
+abnormal way of enabling ECAM for just one controller but to enable
+configuration space access for all the other controllers. In this approach,
+ops are added through MCFG quirk mechanism which access the configuration
+spaces by dynamically programming iATU (internal AddressTranslation Unit)
+to generate respective configuration accesses just like the way it is
+done in DesignWare core sub-system.
+
+Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
+Reported-by: kbuild test robot <lkp@intel.com>
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+V3:
+* Removed MCFG address hardcoding in pci_mcfg.c file
+* Started using 'dbi_base' for accessing root port's own config space
+* and using 'config_base' for accessing config space of downstream hierarchy
+
+V2:
+* Fixed build issues reported by kbuild test bot
+---
+ drivers/acpi/pci_mcfg.c | 7 ++
+ drivers/pci/controller/dwc/Makefile | 2 +-
+ drivers/pci/controller/dwc/pcie-tegra194.c | 102 +++++++++++++++++++++
+ include/linux/pci-ecam.h | 1 +
+ 4 files changed, 111 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
+index 6b347d9920cc2..7071814081736 100644
+--- a/drivers/acpi/pci_mcfg.c
++++ b/drivers/acpi/pci_mcfg.c
+@@ -116,6 +116,13 @@ static struct mcfg_fixup mcfg_quirks[] = {
+ THUNDER_ECAM_QUIRK(2, 12),
+ THUNDER_ECAM_QUIRK(2, 13),
+
++ { "NVIDIA", "TEGRA194", 1, 0, MCFG_BUS_ANY, &tegra194_pcie_ops},
++ { "NVIDIA", "TEGRA194", 1, 1, MCFG_BUS_ANY, &tegra194_pcie_ops},
++ { "NVIDIA", "TEGRA194", 1, 2, MCFG_BUS_ANY, &tegra194_pcie_ops},
++ { "NVIDIA", "TEGRA194", 1, 3, MCFG_BUS_ANY, &tegra194_pcie_ops},
++ { "NVIDIA", "TEGRA194", 1, 4, MCFG_BUS_ANY, &tegra194_pcie_ops},
++ { "NVIDIA", "TEGRA194", 1, 5, MCFG_BUS_ANY, &tegra194_pcie_ops},
++
+ #define XGENE_V1_ECAM_MCFG(rev, seg) \
+ {"APM ", "XGENE ", rev, seg, MCFG_BUS_ANY, \
+ &xgene_v1_pcie_ecam_ops }
+diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
+index 8a637cfcf6e99..76a6c52b8500e 100644
+--- a/drivers/pci/controller/dwc/Makefile
++++ b/drivers/pci/controller/dwc/Makefile
+@@ -17,7 +17,6 @@ obj-$(CONFIG_PCIE_INTEL_GW) += pcie-intel-gw.o
+ obj-$(CONFIG_PCIE_KIRIN) += pcie-kirin.o
+ obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
+ obj-$(CONFIG_PCI_MESON) += pci-meson.o
+-obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
+ obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
+
+ # The following drivers are for devices that use the generic ACPI
+@@ -33,4 +32,5 @@ obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
+ ifdef CONFIG_PCI
+ obj-$(CONFIG_ARM64) += pcie-al.o
+ obj-$(CONFIG_ARM64) += pcie-hisi.o
++obj-$(CONFIG_ARM64) += pcie-tegra194.o
+ endif
+diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
+index ae30a2fd3716a..571b39c5cac63 100644
+--- a/drivers/pci/controller/dwc/pcie-tegra194.c
++++ b/drivers/pci/controller/dwc/pcie-tegra194.c
+@@ -22,6 +22,8 @@
+ #include <linux/of_irq.h>
+ #include <linux/of_pci.h>
+ #include <linux/pci.h>
++#include <linux/pci-acpi.h>
++#include <linux/pci-ecam.h>
+ #include <linux/phy/phy.h>
+ #include <linux/pinctrl/consumer.h>
+ #include <linux/platform_device.h>
+@@ -324,6 +326,103 @@ struct tegra_pcie_dw_of_data {
+ enum dw_pcie_device_mode mode;
+ };
+
++#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
++struct tegra194_pcie_acpi {
++ void __iomem *config_base;
++ void __iomem *iatu_base;
++ void __iomem *dbi_base;
++};
++
++static int tegra194_acpi_init(struct pci_config_window *cfg)
++{
++ struct device *dev = cfg->parent;
++ struct tegra194_pcie_acpi *pcie;
++
++ pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
++ if (!pcie)
++ return -ENOMEM;
++
++ pcie->config_base = cfg->win;
++ pcie->iatu_base = cfg->win + SZ_256K;
++ pcie->dbi_base = cfg->win + SZ_512K;
++ cfg->priv = pcie;
++
++ return 0;
++}
++
++static inline void atu_reg_write(struct tegra194_pcie_acpi *pcie, int index,
++ u32 val, u32 reg)
++{
++ u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
++
++ writel(val, pcie->iatu_base + offset + reg);
++}
++
++static void program_outbound_atu(struct tegra194_pcie_acpi *pcie, int index,
++ int type, u64 cpu_addr, u64 pci_addr, u64 size)
++{
++ atu_reg_write(pcie, index, lower_32_bits(cpu_addr),
++ PCIE_ATU_LOWER_BASE);
++ atu_reg_write(pcie, index, upper_32_bits(cpu_addr),
++ PCIE_ATU_UPPER_BASE);
++ atu_reg_write(pcie, index, lower_32_bits(pci_addr),
++ PCIE_ATU_LOWER_TARGET);
++ atu_reg_write(pcie, index, lower_32_bits(cpu_addr + size - 1),
++ PCIE_ATU_LIMIT);
++ atu_reg_write(pcie, index, upper_32_bits(pci_addr),
++ PCIE_ATU_UPPER_TARGET);
++ atu_reg_write(pcie, index, type, PCIE_ATU_CR1);
++ atu_reg_write(pcie, index, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
++}
++
++static void __iomem *tegra194_map_bus(struct pci_bus *bus,
++ unsigned int devfn, int where)
++{
++ struct pci_config_window *cfg = bus->sysdata;
++ struct tegra194_pcie_acpi *pcie = cfg->priv;
++ u32 busdev;
++ int type;
++
++ if (bus->number < cfg->busr.start || bus->number > cfg->busr.end)
++ return NULL;
++
++ if (bus->number == cfg->busr.start) {
++ if (PCI_SLOT(devfn) == 0)
++ return pcie->dbi_base + where;
++ else
++ return NULL;
++ }
++
++ busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) |
++ PCIE_ATU_FUNC(PCI_FUNC(devfn));
++
++ if (bus->parent->number == cfg->busr.start) {
++ if (PCI_SLOT(devfn) == 0)
++ type = PCIE_ATU_TYPE_CFG0;
++ else
++ return NULL;
++ } else {
++ type = PCIE_ATU_TYPE_CFG1;
++ }
++
++ program_outbound_atu(pcie, PCIE_ATU_REGION_INDEX0, type,
++ cfg->res.start, busdev, SZ_256K);
++ return (void __iomem *)(pcie->config_base + where);
++}
++
++struct pci_ecam_ops tegra194_pcie_ops = {
++ .bus_shift = 20,
++ .init = tegra194_acpi_init,
++ .pci_ops = {
++ .map_bus = tegra194_map_bus,
++ .read = pci_generic_config_read,
++ .write = pci_generic_config_write,
++ }
++};
++#endif /* defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS) */
++
++#ifdef CONFIG_PCIE_TEGRA194
++
+ static inline struct tegra_pcie_dw *to_tegra_pcie(struct dw_pcie *pci)
+ {
+ return container_of(pci, struct tegra_pcie_dw, pci);
+@@ -2406,3 +2505,6 @@ MODULE_DEVICE_TABLE(of, tegra_pcie_dw_of_match);
+ MODULE_AUTHOR("Vidya Sagar <vidyas@nvidia.com>");
+ MODULE_DESCRIPTION("NVIDIA PCIe host controller driver");
+ MODULE_LICENSE("GPL v2");
++
++#endif /* CONFIG_PCIE_TEGRA194 */
++
+diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
+index a73164c85e78b..6156140dcbb65 100644
+--- a/include/linux/pci-ecam.h
++++ b/include/linux/pci-ecam.h
+@@ -57,6 +57,7 @@ extern struct pci_ecam_ops pci_thunder_ecam_ops; /* Cavium ThunderX 1.x */
+ extern struct pci_ecam_ops xgene_v1_pcie_ecam_ops; /* APM X-Gene PCIe v1 */
+ extern struct pci_ecam_ops xgene_v2_pcie_ecam_ops; /* APM X-Gene PCIe v2.x */
+ extern struct pci_ecam_ops al_pcie_ops; /* Amazon Annapurna Labs PCIe */
++extern struct pci_ecam_ops tegra194_pcie_ops; /* Tegra194 PCIe */
+ #endif
+
+ #ifdef CONFIG_PCI_HOST_COMMON
+--
+2.26.2
+
diff --git a/0001-arm64-allwinner-dts-a64-add-LCD-related-device-nodes.patch b/0001-arm64-allwinner-dts-a64-add-LCD-related-device-nodes.patch
deleted file mode 100644
index e3b07c2bb..000000000
--- a/0001-arm64-allwinner-dts-a64-add-LCD-related-device-nodes.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Icenowy Zheng <icenowy@aosc.io>
-Date: Mon, 16 Mar 2020 21:35:03 +0800
-Subject: [PATCH] arm64: allwinner: dts: a64: add LCD-related device nodes for
- PinePhone
-
-PinePhone uses PWM backlight and a XBD599 LCD panel over DSI for
-display.
-
-Add its device nodes.
-
-Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
----
- .../dts/allwinner/sun50i-a64-pinephone.dtsi | 37 +++++++++++++++++++
- 1 file changed, 37 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
-index cefda145c3c9..96d9150423e0 100644
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
-@@ -16,6 +16,15 @@ aliases {
- serial0 = &uart0;
- };
-
-+ backlight: backlight {
-+ compatible = "pwm-backlight";
-+ pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
-+ brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>;
-+ default-brightness-level = <15>;
-+ enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
-+ power-supply = <&reg_ldo_io0>;
-+ };
-+
- chosen {
- stdout-path = "serial0:115200n8";
- };
-@@ -84,6 +93,30 @@ &dai {
- status = "okay";
- };
-
-+&de {
-+ status = "okay";
-+};
-+
-+&dphy {
-+ status = "okay";
-+};
-+
-+&dsi {
-+ vcc-dsi-supply = <&reg_dldo1>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "okay";
-+
-+ panel@0 {
-+ compatible = "xingbangda,xbd599";
-+ reg = <0>;
-+ reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
-+ iovcc-supply = <&reg_dldo2>;
-+ vcc-supply = <&reg_ldo_io0>;
-+ backlight = <&backlight>;
-+ };
-+};
-+
- &ehci0 {
- status = "okay";
- };
-@@ -188,6 +221,10 @@ &r_pio {
- */
- };
-
-+&r_pwm {
-+ status = "okay";
-+};
-+
- &r_rsb {
- status = "okay";
-
---
-2.26.2
-
diff --git a/0001-drm-panel-add-Xingbangda-XBD599-panel.patch b/0001-drm-panel-add-Xingbangda-XBD599-panel.patch
deleted file mode 100644
index ae0850b8a..000000000
--- a/0001-drm-panel-add-Xingbangda-XBD599-panel.patch
+++ /dev/null
@@ -1,423 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Icenowy Zheng <icenowy@aosc.io>
-Date: Mon, 16 Mar 2020 21:35:01 +0800
-Subject: [PATCH] drm: panel: add Xingbangda XBD599 panel
-
-Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI IPS LCD panel made by
-Xingbangda, which is used on PinePhone final assembled phones.
-
-Add support for it.
-
-Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
----
- drivers/gpu/drm/panel/Kconfig | 9 +
- drivers/gpu/drm/panel/Makefile | 1 +
- .../gpu/drm/panel/panel-xingbangda-xbd599.c | 366 ++++++++++++++++++
- 3 files changed, 376 insertions(+)
- create mode 100644 drivers/gpu/drm/panel/panel-xingbangda-xbd599.c
-
-diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
-index a1723c1b5fbf..cf0c59015a44 100644
---- a/drivers/gpu/drm/panel/Kconfig
-+++ b/drivers/gpu/drm/panel/Kconfig
-@@ -433,6 +433,15 @@ config DRM_PANEL_TRULY_NT35597_WQXGA
- Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
- Video Mode panel
-
-+config DRM_PANEL_XINGBANGDA_XBD599
-+ tristate "Xingbangda XBD599 panel"
-+ depends on OF
-+ depends on DRM_MIPI_DSI
-+ depends on BACKLIGHT_CLASS_DEVICE
-+ help
-+ Say Y here if you want to enable support for the Xingbangda XBD599
-+ MIPI DSI Video Mode panel.
-+
- config DRM_PANEL_XINPENG_XPP055C272
- tristate "Xinpeng XPP055C272 panel driver"
- depends on OF
-diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
-index 96a883cd6630..c84ed5215984 100644
---- a/drivers/gpu/drm/panel/Makefile
-+++ b/drivers/gpu/drm/panel/Makefile
-@@ -46,4 +46,5 @@ obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
- obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
- obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
- obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
-+obj-$(CONFIG_DRM_PANEL_XINGBANGDA_XBD599) += panel-xingbangda-xbd599.o
- obj-$(CONFIG_DRM_PANEL_XINPENG_XPP055C272) += panel-xinpeng-xpp055c272.o
-diff --git a/drivers/gpu/drm/panel/panel-xingbangda-xbd599.c b/drivers/gpu/drm/panel/panel-xingbangda-xbd599.c
-new file mode 100644
-index 000000000000..b483f96ee1db
---- /dev/null
-+++ b/drivers/gpu/drm/panel/panel-xingbangda-xbd599.c
-@@ -0,0 +1,366 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Xingbangda XBD599 MIPI-DSI panel driver
-+ *
-+ * Copyright (C) 2019-2020 Icenowy Zheng <icenowy@aosc.io>
-+ *
-+ * Based on panel-rocktech-jh057n00900.c, which is:
-+ * Copyright (C) Purism SPC 2019
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/gpio/consumer.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/module.h>
-+#include <linux/of_device.h>
-+#include <linux/regulator/consumer.h>
-+
-+#include <drm/drm_mipi_dsi.h>
-+#include <drm/drm_modes.h>
-+#include <drm/drm_panel.h>
-+#include <drm/drm_print.h>
-+
-+/* Manufacturer specific Commands send via DSI */
-+#define ST7703_CMD_ALL_PIXEL_OFF 0x22
-+#define ST7703_CMD_ALL_PIXEL_ON 0x23
-+#define ST7703_CMD_SETDISP 0xB2
-+#define ST7703_CMD_SETRGBIF 0xB3
-+#define ST7703_CMD_SETCYC 0xB4
-+#define ST7703_CMD_SETBGP 0xB5
-+#define ST7703_CMD_SETVCOM 0xB6
-+#define ST7703_CMD_SETOTP 0xB7
-+#define ST7703_CMD_SETPOWER_EXT 0xB8
-+#define ST7703_CMD_SETEXTC 0xB9
-+#define ST7703_CMD_SETMIPI 0xBA
-+#define ST7703_CMD_SETVDC 0xBC
-+#define ST7703_CMD_SETSCR 0xC0
-+#define ST7703_CMD_SETPOWER 0xC1
-+#define ST7703_CMD_UNK_C6 0xC6
-+#define ST7703_CMD_SETPANEL 0xCC
-+#define ST7703_CMD_SETGAMMA 0xE0
-+#define ST7703_CMD_SETEQ 0xE3
-+#define ST7703_CMD_SETGIP1 0xE9
-+#define ST7703_CMD_SETGIP2 0xEA
-+
-+static const char * const regulator_names[] = {
-+ "iovcc",
-+ "vcc",
-+};
-+
-+struct xbd599 {
-+ struct device *dev;
-+ struct drm_panel panel;
-+ struct gpio_desc *reset_gpio;
-+ struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)];
-+ bool prepared;
-+};
-+
-+static inline struct xbd599 *panel_to_xbd599(struct drm_panel *panel)
-+{
-+ return container_of(panel, struct xbd599, panel);
-+}
-+
-+#define dsi_dcs_write_seq(dsi, cmd, seq...) do { \
-+ static const u8 d[] = { seq }; \
-+ int ret; \
-+ ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d)); \
-+ if (ret < 0) \
-+ return ret; \
-+ } while (0)
-+
-+static int xbd599_init_sequence(struct xbd599 *ctx)
-+{
-+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
-+ struct device *dev = ctx->dev;
-+ int ret;
-+
-+ /*
-+ * Init sequence was supplied by the panel vendor.
-+ */
-+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC,
-+ 0xF1, 0x12, 0x83);
-+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI,
-+ 0x33, 0x81, 0x05, 0xF9, 0x0E, 0x0E, 0x20, 0x00,
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x44, 0x25,
-+ 0x00, 0x91, 0x0a, 0x00, 0x00, 0x02, 0x4F, 0x11,
-+ 0x00, 0x00, 0x37);
-+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT,
-+ 0x25, 0x22, 0x20, 0x03);
-+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF,
-+ 0x10, 0x10, 0x05, 0x05, 0x03, 0xFF, 0x00, 0x00,
-+ 0x00, 0x00);
-+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR,
-+ 0x73, 0x73, 0x50, 0x50, 0x00, 0xC0, 0x08, 0x70,
-+ 0x00);
-+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
-+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
-+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
-+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP, 0xF0, 0x12, 0xF0);
-+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ,
-+ 0x00, 0x00, 0x0B, 0x0B, 0x10, 0x10, 0x00, 0x00,
-+ 0x00, 0x00, 0xFF, 0x00, 0xC0, 0x10);
-+ dsi_dcs_write_seq(dsi, 0xC6, 0x01, 0x00, 0xFF, 0xFF, 0x00);
-+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
-+ 0x74, 0x00, 0x32, 0x32, 0x77, 0xF1, 0xFF, 0xFF,
-+ 0xCC, 0xCC, 0x77, 0x77);
-+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP, 0x07, 0x07);
-+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM, 0x2C, 0x2C);
-+ dsi_dcs_write_seq(dsi, 0xBF, 0x02, 0x11, 0x00);
-+
-+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1,
-+ 0x82, 0x10, 0x06, 0x05, 0xA2, 0x0A, 0xA5, 0x12,
-+ 0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
-+ 0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
-+ 0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88,
-+ 0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64,
-+ 0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
-+ 0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
-+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2,
-+ 0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+ 0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
-+ 0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
-+ 0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
-+ 0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00,
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x0A,
-+ 0xA5, 0x00, 0x00, 0x00, 0x00);
-+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA,
-+ 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41, 0x35,
-+ 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12, 0x12,
-+ 0x18, 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41,
-+ 0x35, 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12,
-+ 0x12, 0x18);
-+ msleep(20);
-+
-+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
-+ if (ret < 0) {
-+ DRM_DEV_ERROR(dev, "Failed to exit sleep mode\n");
-+ return ret;
-+ }
-+ msleep(250);
-+
-+ ret = mipi_dsi_dcs_set_display_on(dsi);
-+ if (ret)
-+ return ret;
-+ msleep(50);
-+
-+ DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n");
-+ return 0;
-+}
-+
-+static int xbd599_prepare(struct drm_panel *panel)
-+{
-+ struct xbd599 *ctx = panel_to_xbd599(panel);
-+ int ret;
-+
-+ if (ctx->prepared)
-+ return 0;
-+
-+ ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
-+ if (ret)
-+ return ret;
-+
-+ DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
-+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
-+ usleep_range(20, 40);
-+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
-+ msleep(20);
-+
-+ ctx->prepared = true;
-+
-+ return 0;
-+}
-+
-+static int xbd599_enable(struct drm_panel *panel)
-+{
-+ struct xbd599 *ctx = panel_to_xbd599(panel);
-+ int ret;
-+
-+ ret = xbd599_init_sequence(ctx);
-+ if (ret < 0) {
-+ DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
-+ ret);
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static int xbd599_disable(struct drm_panel *panel)
-+{
-+ struct xbd599 *ctx = panel_to_xbd599(panel);
-+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
-+
-+ return mipi_dsi_dcs_set_display_off(dsi);
-+}
-+
-+static int xbd599_unprepare(struct drm_panel *panel)
-+{
-+ struct xbd599 *ctx = panel_to_xbd599(panel);
-+
-+ if (!ctx->prepared)
-+ return 0;
-+
-+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
-+ regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
-+ ctx->prepared = false;
-+
-+ return 0;
-+}
-+
-+static const struct drm_display_mode xbd599_default_mode = {
-+ .hdisplay = 720,
-+ .hsync_start = 720 + 40,
-+ .hsync_end = 720 + 40 + 40,
-+ .htotal = 720 + 40 + 40 + 40,
-+ .vdisplay = 1440,
-+ .vsync_start = 1440 + 18,
-+ .vsync_end = 1440 + 18 + 10,
-+ .vtotal = 1440 + 18 + 10 + 17,
-+ .vrefresh = 60,
-+ .clock = 69000,
-+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
-+
-+ .width_mm = 68,
-+ .height_mm = 136,
-+ .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
-+};
-+
-+static int xbd599_get_modes(struct drm_panel *panel,
-+ struct drm_connector *connector)
-+{
-+ struct xbd599 *ctx = panel_to_xbd599(panel);
-+ struct drm_display_mode *mode;
-+
-+ mode = drm_mode_duplicate(connector->dev, &xbd599_default_mode);
-+ if (!mode) {
-+ DRM_DEV_ERROR(ctx->dev, "Failed to add mode\n");
-+ return -ENOMEM;
-+ }
-+
-+ drm_mode_set_name(mode);
-+
-+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
-+ connector->display_info.width_mm = mode->width_mm;
-+ connector->display_info.height_mm = mode->height_mm;
-+ drm_mode_probed_add(connector, mode);
-+
-+ return 1;
-+}
-+
-+static const struct drm_panel_funcs xbd599_drm_funcs = {
-+ .prepare = xbd599_prepare,
-+ .enable = xbd599_enable,
-+ .disable = xbd599_disable,
-+ .unprepare = xbd599_unprepare,
-+ .get_modes = xbd599_get_modes,
-+};
-+
-+static int xbd599_probe(struct mipi_dsi_device *dsi)
-+{
-+ struct device *dev = &dsi->dev;
-+ struct xbd599 *ctx;
-+ int i, ret;
-+
-+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
-+ if (!ctx)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++)
-+ ctx->supplies[i].supply = regulator_names[i];
-+
-+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
-+ ctx->supplies);
-+ if (ret < 0) {
-+ DRM_DEV_ERROR(&dsi->dev, "cannot get regulators\n");
-+ return ret;
-+ }
-+
-+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
-+ if (IS_ERR(ctx->reset_gpio)) {
-+ DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
-+ return PTR_ERR(ctx->reset_gpio);
-+ }
-+
-+ mipi_dsi_set_drvdata(dsi, ctx);
-+
-+ ctx->dev = dev;
-+
-+ dsi->lanes = 4;
-+ dsi->format = MIPI_DSI_FMT_RGB888;
-+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
-+
-+ drm_panel_init(&ctx->panel, &dsi->dev, &xbd599_drm_funcs,
-+ DRM_MODE_CONNECTOR_DSI);
-+
-+ ret = drm_panel_of_backlight(&ctx->panel);
-+ if (ret)
-+ return ret;
-+
-+ drm_panel_add(&ctx->panel);
-+
-+ ret = mipi_dsi_attach(dsi);
-+ if (ret < 0) {
-+ DRM_DEV_ERROR(dev, "mipi_dsi_attach failed. Is host ready?\n");
-+ drm_panel_remove(&ctx->panel);
-+ return ret;
-+ }
-+
-+ DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
-+ xbd599_default_mode.hdisplay,
-+ xbd599_default_mode.vdisplay,
-+ xbd599_default_mode.vrefresh,
-+ mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
-+
-+ return 0;
-+}
-+
-+static void xbd599_shutdown(struct mipi_dsi_device *dsi)
-+{
-+ struct xbd599 *ctx = mipi_dsi_get_drvdata(dsi);
-+ int ret;
-+
-+ ret = drm_panel_unprepare(&ctx->panel);
-+ if (ret < 0)
-+ DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
-+ ret);
-+}
-+
-+static int xbd599_remove(struct mipi_dsi_device *dsi)
-+{
-+ struct xbd599 *ctx = mipi_dsi_get_drvdata(dsi);
-+ int ret;
-+
-+ xbd599_shutdown(dsi);
-+
-+ ret = mipi_dsi_detach(dsi);
-+ if (ret < 0)
-+ DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
-+ ret);
-+
-+ drm_panel_remove(&ctx->panel);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id xbd599_of_match[] = {
-+ { .compatible = "xingbangda,xbd599", },
-+ { /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, xbd599_of_match);
-+
-+static struct mipi_dsi_driver xbd599_driver = {
-+ .probe = xbd599_probe,
-+ .remove = xbd599_remove,
-+ .shutdown = xbd599_shutdown,
-+ .driver = {
-+ .name = "panel-xingbangda-xbd599",
-+ .of_match_table = xbd599_of_match,
-+ },
-+};
-+module_mipi_dsi_driver(xbd599_driver);
-+
-+MODULE_AUTHOR("Icenowy Zheng <icenowy@aosc.io>");
-+MODULE_DESCRIPTION("DRM driver for Xingbangda XBD599 MIPI DSI panel");
-+MODULE_LICENSE("GPL v2");
---
-2.26.2
-
diff --git a/0001-drm-sun4i-sun6i_mipi_dsi-fix-horizontal-timing-calcu.patch b/0001-drm-sun4i-sun6i_mipi_dsi-fix-horizontal-timing-calcu.patch
deleted file mode 100644
index f61b5490f..000000000
--- a/0001-drm-sun4i-sun6i_mipi_dsi-fix-horizontal-timing-calcu.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Icenowy Zheng <icenowy@aosc.io>
-Date: Mon, 16 Mar 2020 21:35:02 +0800
-Subject: [PATCH] drm/sun4i: sun6i_mipi_dsi: fix horizontal timing calculation
-
-The max() function call in horizontal timing calculation shouldn't pad a
-length already subtracted with overhead to overhead, instead it should
-only prevent the set timing to underflow.
-
-Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
----
- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
-diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
-index 3eb89f1eb0e1..4e415793d155 100644
---- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
-+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
-@@ -555,7 +555,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
- */
- #define HSA_PACKET_OVERHEAD 10
- hsa = max((unsigned int)HSA_PACKET_OVERHEAD,
-- (mode->hsync_end - mode->hsync_start) * Bpp - HSA_PACKET_OVERHEAD);
-+ (mode->hsync_end - mode->hsync_start) * Bpp) - HSA_PACKET_OVERHEAD;
-
- /*
- * The backporch is set using a blanking packet (4
-@@ -564,7 +564,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
- */
- #define HBP_PACKET_OVERHEAD 6
- hbp = max((unsigned int)HBP_PACKET_OVERHEAD,
-- (mode->htotal - mode->hsync_end) * Bpp - HBP_PACKET_OVERHEAD);
-+ (mode->htotal - mode->hsync_end) * Bpp) - HBP_PACKET_OVERHEAD;
-
- /*
- * The frontporch is set using a sync event (4 bytes)
-@@ -574,7 +574,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
- */
- #define HFP_PACKET_OVERHEAD 16
- hfp = max((unsigned int)HFP_PACKET_OVERHEAD,
-- (mode->hsync_start - mode->hdisplay) * Bpp - HFP_PACKET_OVERHEAD);
-+ (mode->hsync_start - mode->hdisplay) * Bpp) - HFP_PACKET_OVERHEAD;
-
- /*
- * The blanking is set using a sync event (4 bytes)
-@@ -583,8 +583,8 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
- */
- #define HBLK_PACKET_OVERHEAD 10
- hblk = max((unsigned int)HBLK_PACKET_OVERHEAD,
-- (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp -
-- HBLK_PACKET_OVERHEAD);
-+ (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp) -
-+ HBLK_PACKET_OVERHEAD;
-
- /*
- * And I'm not entirely sure what vblk is about. The driver in
---
-2.26.2
-
diff --git a/0001-dt-bindings-Add-doc-for-Pine64-Pinebook-Pro.patch b/0001-dt-bindings-Add-doc-for-Pine64-Pinebook-Pro.patch
deleted file mode 100644
index f212fb501..000000000
--- a/0001-dt-bindings-Add-doc-for-Pine64-Pinebook-Pro.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Emmanuel Vadot <manu@freebsd.org>
-Date: Wed, 4 Mar 2020 22:30:22 +0100
-Subject: [PATCH] dt-bindings: Add doc for Pine64 Pinebook Pro
-
-Add a compatible for Pine64 Pinebook Pro
-
-Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
-Reviewed-by: Rob Herring <robh@kernel.org>
----
- Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
-index 715586dea9bb..fff0439c6b78 100644
---- a/Documentation/devicetree/bindings/arm/rockchip.yaml
-+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
-@@ -420,6 +420,11 @@ properties:
- - const: pine64,rockpro64
- - const: rockchip,rk3399
-
-+ - description: Pine64 PinebookPro
-+ items:
-+ - const: pine64,pinebook-pro
-+ - const: rockchip,rk3399
-+
- - description: Radxa Rock
- items:
- - const: radxa,rock
---
-2.26.2
-
diff --git a/0001-dt-bindings-panel-add-binding-for-Xingbangda-XBD599-.patch b/0001-dt-bindings-panel-add-binding-for-Xingbangda-XBD599-.patch
deleted file mode 100644
index 8e6808fdc..000000000
--- a/0001-dt-bindings-panel-add-binding-for-Xingbangda-XBD599-.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Icenowy Zheng <icenowy@aosc.io>
-Date: Mon, 16 Mar 2020 21:35:00 +0800
-Subject: [PATCH] dt-bindings: panel: add binding for Xingbangda XBD599 panel
-
-Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel.
-
-Add its device tree binding.
-
-Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
----
- .../display/panel/xingbangda,xbd599.yaml | 50 +++++++++++++++++++
- 1 file changed, 50 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/display/panel/xingbangda,xbd599.yaml
-
-diff --git a/Documentation/devicetree/bindings/display/panel/xingbangda,xbd599.yaml b/Documentation/devicetree/bindings/display/panel/xingbangda,xbd599.yaml
-new file mode 100644
-index 000000000000..b27bcf11198f
---- /dev/null
-+++ b/Documentation/devicetree/bindings/display/panel/xingbangda,xbd599.yaml
-@@ -0,0 +1,50 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/display/panel/xingbangda,xbd599.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Xingbangda XBD599 5.99in MIPI-DSI LCD panel
-+
-+maintainers:
-+ - Icenowy Zheng <icenowy@aosc.io>
-+
-+allOf:
-+ - $ref: panel-common.yaml#
-+
-+properties:
-+ compatible:
-+ const: xingbangda,xbd599
-+ reg: true
-+ backlight: true
-+ reset-gpios: true
-+ vcc-supply:
-+ description: regulator that supplies the VCC voltage
-+ iovcc-supply:
-+ description: regulator that supplies the IOVCC voltage
-+
-+required:
-+ - compatible
-+ - reg
-+ - backlight
-+ - vcc-supply
-+ - iovcc-supply
-+
-+additionalProperties: false
-+
-+examples:
-+ - |
-+ dsi {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ panel@0 {
-+ compatible = "xingbangda,xbd599";
-+ reg = <0>;
-+ backlight = <&backlight>;
-+ iovcc-supply = <&reg_dldo2>;
-+ vcc-supply = <&reg_ldo_io0>;
-+ };
-+ };
-+
-+...
---
-2.26.2
-
diff --git a/0001-dt-bindings-vendor-prefixes-Add-Xingbangda.patch b/0001-dt-bindings-vendor-prefixes-Add-Xingbangda.patch
new file mode 100644
index 000000000..eef72a211
--- /dev/null
+++ b/0001-dt-bindings-vendor-prefixes-Add-Xingbangda.patch
@@ -0,0 +1,33 @@
+From 025eb2eb927d2c3020882ea0ed3af28d65321763 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy@aosc.io>
+Date: Fri, 26 Jun 2020 02:55:49 +0200
+Subject: [PATCH 01/13] dt-bindings: vendor-prefixes: Add Xingbangda
+
+Shenzhen Xingbangda Display Technology Co., Ltd is a company which
+produces LCD modules. It supplies the LCD panels for the PinePhone.
+
+Add the vendor prefix of it.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
+Signed-off-by: Ondrej Jirman <megous@megous.com>
+Acked-by: Rob Herring <robh@kernel.org>
+---
+ Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
+index d3891386d6710..a558ef87ee5b0 100644
+--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
++++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
+@@ -1121,6 +1121,8 @@ patternProperties:
+ description: Xiaomi Technology Co., Ltd.
+ "^xillybus,.*":
+ description: Xillybus Ltd.
++ "^xingbangda,.*":
++ description: Shenzhen Xingbangda Display Technology Co., Ltd
+ "^xinpeng,.*":
+ description: Shenzhen Xinpeng Technology Co., Ltd
+ "^xlnx,.*":
+--
+2.26.2
+
diff --git a/0001-usb-fusb302-Convert-to-use-GPIO-descriptors.patch b/0001-usb-fusb302-Convert-to-use-GPIO-descriptors.patch
new file mode 100644
index 000000000..40732340c
--- /dev/null
+++ b/0001-usb-fusb302-Convert-to-use-GPIO-descriptors.patch
@@ -0,0 +1,162 @@
+From 2c36867719d93db8d7f365310587578ab980762c Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Wed, 15 Apr 2020 21:24:48 +0200
+Subject: [PATCH] usb: fusb302: Convert to use GPIO descriptors
+
+This converts the FUSB302 driver to use GPIO descriptors.
+The conversion to descriptors per se is pretty straight-forward.
+
+In the process I discovered that:
+
+1. The driver uses a completely undocumented device tree binding
+ for the interrupt GPIO line, "fcs,int_n". Ooops.
+
+2. The undocumented binding, presumably since it has not seen
+ review, is just "fcs,int_n", lacking the compulsory "-gpios"
+ suffix and also something that is not a good name because
+ the "_n" implies the line is inverted which is something we
+ handle with flags in the device tree. Ooops.
+
+3. Possibly the driver should not be requesting the line as a
+ GPIO and request the corresponding interrupt line by open
+ coding, the GPIO chip is very likely doubleing as an IRQ
+ controller and can probably provide an interrupt directly
+ for this line with interrupts-extended = <&gpio0 ...>;
+
+4. Possibly the IRQ should just be tagged on the I2C client node
+ in the device tree like apparently ACPI does, as it overrides
+ this IRQ with client->irq if that exists.
+
+But now it is too late to do much about that and as I can see
+this is used like this in the Pinebook which is a shipping product
+so let'a just contain the mess and move on.
+
+The property currently appears in:
+arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+
+Create a quirk in the GPIO OF library to allow this property
+specifically to be specified without the "-gpios" suffix, we have
+other such bindings already.
+
+Cc: Tobias Schramm <t.schramm@manjaro.org>
+Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Cc: Yueyao Zhu <yueyao@google.com>
+Cc: Guenter Roeck <linux@roeck-us.net>
+Cc: devicetree@vger.kernel.org
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Link: https://lore.kernel.org/r/20200415192448.305257-1-linus.walleij@linaro.org
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/gpio/gpiolib-of.c | 21 +++++++++++++++++++++
+ drivers/usb/typec/tcpm/fusb302.c | 32 +++++++++-----------------------
+ 2 files changed, 30 insertions(+), 23 deletions(-)
+
+diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
+index ccc449df3792a..20c2c428168e4 100644
+--- a/drivers/gpio/gpiolib-of.c
++++ b/drivers/gpio/gpiolib-of.c
+@@ -460,6 +460,24 @@ static struct gpio_desc *of_find_arizona_gpio(struct device *dev,
+ return of_get_named_gpiod_flags(dev->of_node, con_id, 0, of_flags);
+ }
+
++static struct gpio_desc *of_find_usb_gpio(struct device *dev,
++ const char *con_id,
++ enum of_gpio_flags *of_flags)
++{
++ /*
++ * Currently this USB quirk is only for the Fairchild FUSB302 host which is using
++ * an undocumented DT GPIO line named "fcs,int_n" without the compulsory "-gpios"
++ * suffix.
++ */
++ if (!IS_ENABLED(CONFIG_TYPEC_FUSB302))
++ return ERR_PTR(-ENOENT);
++
++ if (!con_id || strcmp(con_id, "fcs,int_n"))
++ return ERR_PTR(-ENOENT);
++
++ return of_get_named_gpiod_flags(dev->of_node, con_id, 0, of_flags);
++}
++
+ struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
+ unsigned int idx, unsigned long *flags)
+ {
+@@ -504,6 +522,9 @@ struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
+ if (PTR_ERR(desc) == -ENOENT)
+ desc = of_find_arizona_gpio(dev, con_id, &of_flags);
+
++ if (PTR_ERR(desc) == -ENOENT)
++ desc = of_find_usb_gpio(dev, con_id, &of_flags);
++
+ if (IS_ERR(desc))
+ return desc;
+
+diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c
+index b498960ff72b5..b28facece43c4 100644
+--- a/drivers/usb/typec/tcpm/fusb302.c
++++ b/drivers/usb/typec/tcpm/fusb302.c
+@@ -9,14 +9,13 @@
+ #include <linux/delay.h>
+ #include <linux/errno.h>
+ #include <linux/extcon.h>
+-#include <linux/gpio.h>
++#include <linux/gpio/consumer.h>
+ #include <linux/i2c.h>
+ #include <linux/interrupt.h>
+ #include <linux/kernel.h>
+ #include <linux/module.h>
+ #include <linux/mutex.h>
+ #include <linux/of_device.h>
+-#include <linux/of_gpio.h>
+ #include <linux/pinctrl/consumer.h>
+ #include <linux/proc_fs.h>
+ #include <linux/regulator/consumer.h>
+@@ -83,7 +82,7 @@ struct fusb302_chip {
+ struct work_struct irq_work;
+ bool irq_suspended;
+ bool irq_while_suspended;
+- int gpio_int_n;
++ struct gpio_desc *gpio_int_n;
+ int gpio_int_n_irq;
+ struct extcon_dev *extcon;
+
+@@ -1618,30 +1617,17 @@ static void fusb302_irq_work(struct work_struct *work)
+
+ static int init_gpio(struct fusb302_chip *chip)
+ {
+- struct device_node *node;
++ struct device *dev = chip->dev;
+ int ret = 0;
+
+- node = chip->dev->of_node;
+- chip->gpio_int_n = of_get_named_gpio(node, "fcs,int_n", 0);
+- if (!gpio_is_valid(chip->gpio_int_n)) {
+- ret = chip->gpio_int_n;
+- dev_err(chip->dev, "cannot get named GPIO Int_N, ret=%d", ret);
+- return ret;
+- }
+- ret = devm_gpio_request(chip->dev, chip->gpio_int_n, "fcs,int_n");
+- if (ret < 0) {
+- dev_err(chip->dev, "cannot request GPIO Int_N, ret=%d", ret);
+- return ret;
+- }
+- ret = gpio_direction_input(chip->gpio_int_n);
+- if (ret < 0) {
+- dev_err(chip->dev,
+- "cannot set GPIO Int_N to input, ret=%d", ret);
+- return ret;
++ chip->gpio_int_n = devm_gpiod_get(dev, "fcs,int_n", GPIOD_IN);
++ if (IS_ERR(chip->gpio_int_n)) {
++ dev_err(dev, "failed to request gpio_int_n\n");
++ return PTR_ERR(chip->gpio_int_n);
+ }
+- ret = gpio_to_irq(chip->gpio_int_n);
++ ret = gpiod_to_irq(chip->gpio_int_n);
+ if (ret < 0) {
+- dev_err(chip->dev,
++ dev_err(dev,
+ "cannot request IRQ for GPIO Int_N, ret=%d", ret);
+ return ret;
+ }
+--
+2.26.2
+
diff --git a/0002-dt-bindings-panel-Convert-rocktech-jh057n00900-to-ya.patch b/0002-dt-bindings-panel-Convert-rocktech-jh057n00900-to-ya.patch
new file mode 100644
index 000000000..0d05e02e0
--- /dev/null
+++ b/0002-dt-bindings-panel-Convert-rocktech-jh057n00900-to-ya.patch
@@ -0,0 +1,120 @@
+From 789d3f52a1cf675ba68c3578fe2b259bc44caba2 Mon Sep 17 00:00:00 2001
+From: Ondrej Jirman <megous@megous.com>
+Date: Fri, 26 Jun 2020 02:55:50 +0200
+Subject: [PATCH 02/13] dt-bindings: panel: Convert rocktech, jh057n00900 to
+ yaml
+
+Convert Rocktech MIPI DSI panel driver from txt to yaml bindings.
+
+Signed-off-by: Ondrej Jirman <megous@megous.com>
+---
+ .../display/panel/rocktech,jh057n00900.txt | 23 -------
+ .../display/panel/rocktech,jh057n00900.yaml | 66 +++++++++++++++++++
+ 2 files changed, 66 insertions(+), 23 deletions(-)
+ delete mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
+ create mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
+
+diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
+deleted file mode 100644
+index a372c5d846956..0000000000000
+--- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
++++ /dev/null
+@@ -1,23 +0,0 @@
+-Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel
+-
+-Required properties:
+-- compatible: should be "rocktech,jh057n00900"
+-- reg: DSI virtual channel of the peripheral
+-- reset-gpios: panel reset gpio
+-- backlight: phandle of the backlight device attached to the panel
+-- vcc-supply: phandle of the regulator that provides the vcc supply voltage.
+-- iovcc-supply: phandle of the regulator that provides the iovcc supply
+- voltage.
+-
+-Example:
+-
+- &mipi_dsi {
+- panel@0 {
+- compatible = "rocktech,jh057n00900";
+- reg = <0>;
+- backlight = <&backlight>;
+- reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+- vcc-supply = <&reg_2v8_p>;
+- iovcc-supply = <&reg_1v8_p>;
+- };
+- };
+diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
+new file mode 100644
+index 0000000000000..f97c48550741c
+--- /dev/null
++++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
+@@ -0,0 +1,66 @@
++# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
++%YAML 1.2
++---
++$id: http://devicetree.org/schemas/display/panel/rocktech,jh057n00900.yaml#
++$schema: http://devicetree.org/meta-schemas/core.yaml#
++
++title: Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
++
++maintainers:
++ - Ondrej Jirman <megi@xff.cz>
++
++description: |
++ Rocktech JH057N00900 is a 720x1440 TFT LCD panel
++ connected using a MIPI-DSI video interface.
++
++allOf:
++ - $ref: panel-common.yaml#
++
++properties:
++ compatible:
++ const: rocktech,jh057n00900
++
++ reg:
++ maxItems: 1
++ description: DSI virtual channel
++
++ vcc-supply:
++ description: Panel power supply
++
++ vccio-supply:
++ description: I/O voltage supply
++
++ reset-gpios:
++ description: GPIO used for the reset pin
++ maxItems: 1
++
++ backlight:
++ description: Backlight used by the panel
++ $ref: "/schemas/types.yaml#/definitions/phandle"
++
++required:
++ - compatible
++ - reg
++ - vcc-supply
++ - vccio-supply
++ - reset-gpios
++
++additionalProperties: false
++
++examples:
++ - |
++ #include <dt-bindings/gpio/gpio.h>
++
++ dsi {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ panel@0 {
++ compatible = "rocktech,jh057n00900";
++ reg = <0>;
++ vcc-supply = <&reg_2v8_p>;
++ iovcc-supply = <&reg_1v8_p>;
++ reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
++ backlight = <&backlight>;
++ };
++ };
++...
+--
+2.26.2
+
diff --git a/0003-dt-bindings-panel-Add-compatible-for-Xingbangda-XBD5.patch b/0003-dt-bindings-panel-Add-compatible-for-Xingbangda-XBD5.patch
new file mode 100644
index 000000000..a7099de05
--- /dev/null
+++ b/0003-dt-bindings-panel-Add-compatible-for-Xingbangda-XBD5.patch
@@ -0,0 +1,37 @@
+From 12146093602e0dedb7ee431224fc4a58d40697f8 Mon Sep 17 00:00:00 2001
+From: Ondrej Jirman <megous@megous.com>
+Date: Fri, 26 Jun 2020 02:55:51 +0200
+Subject: [PATCH 03/13] dt-bindings: panel: Add compatible for Xingbangda
+ XBD599 panel
+
+Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel. It is based on
+Sitronix ST7703 LCD controller just like rocktech,jh057n00900. It is
+used in PinePhone.
+
+Add a compatible for it.
+
+Signed-off-by: Ondrej Jirman <megous@megous.com>
+---
+ .../bindings/display/panel/rocktech,jh057n00900.yaml | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
+index f97c48550741c..4d43a1b36d7c7 100644
+--- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
++++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
+@@ -18,7 +18,11 @@ allOf:
+
+ properties:
+ compatible:
+- const: rocktech,jh057n00900
++ enum:
++ # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
++ - rocktech,jh057n00900
++ # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel
++ - xingbangda,xbd599
+
+ reg:
+ maxItems: 1
+--
+2.26.2
+
diff --git a/0004-drm-panel-rocktech-jh057n00900-Rename-the-driver-to-.patch b/0004-drm-panel-rocktech-jh057n00900-Rename-the-driver-to-.patch
new file mode 100644
index 000000000..c4c947641
--- /dev/null
+++ b/0004-drm-panel-rocktech-jh057n00900-Rename-the-driver-to-.patch
@@ -0,0 +1,91 @@
+From e82044df3332199c63904d86b4b1ad0963a6f8e0 Mon Sep 17 00:00:00 2001
+From: Ondrej Jirman <megous@megous.com>
+Date: Fri, 26 Jun 2020 02:55:52 +0200
+Subject: [PATCH 04/13] drm/panel: rocktech-jh057n00900: Rename the driver to
+ st7703
+
+This rename is done so that the driver matches the name of the
+display controller and in preparation for adding support for more
+panels to the driver.
+
+This is just a basic file rename, with no code changes.
+
+Signed-off-by: Ondrej Jirman <megous@megous.com>
+---
+ drivers/gpu/drm/panel/Kconfig | 26 +++++++++----------
+ drivers/gpu/drm/panel/Makefile | 2 +-
+ ...-jh057n00900.c => panel-sitronix-st7703.c} | 0
+ 3 files changed, 14 insertions(+), 14 deletions(-)
+ rename drivers/gpu/drm/panel/{panel-rocktech-jh057n00900.c => panel-sitronix-st7703.c} (100%)
+
+diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
+index a1723c1b5fbf8..7cf1f160fdd51 100644
+--- a/drivers/gpu/drm/panel/Kconfig
++++ b/drivers/gpu/drm/panel/Kconfig
+@@ -262,19 +262,6 @@ config DRM_PANEL_RAYDIUM_RM68200
+ Say Y here if you want to enable support for Raydium RM68200
+ 720x1280 DSI video mode panel.
+
+-config DRM_PANEL_ROCKTECH_JH057N00900
+- tristate "Rocktech JH057N00900 MIPI touchscreen panel"
+- depends on OF
+- depends on DRM_MIPI_DSI
+- depends on BACKLIGHT_CLASS_DEVICE
+- help
+- Say Y here if you want to enable support for Rocktech JH057N00900
+- MIPI DSI panel as e.g. used in the Librem 5 devkit. It has a
+- resolution of 720x1440 pixels, a built in backlight and touch
+- controller.
+- Touch input support is provided by the goodix driver and needs to be
+- selected separately.
+-
+ config DRM_PANEL_RONBO_RB070D30
+ tristate "Ronbo Electronics RB070D30 panel"
+ depends on OF
+@@ -374,6 +361,19 @@ config DRM_PANEL_SITRONIX_ST7701
+ ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
+ system interfaces.
+
++config DRM_PANEL_SITRONIX_ST7703
++ tristate "Sitronix ST7703 based MIPI touchscreen panels"
++ depends on OF
++ depends on DRM_MIPI_DSI
++ depends on BACKLIGHT_CLASS_DEVICE
++ help
++ Say Y here if you want to enable support for Sitronix ST7703 based
++ panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
++ the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
++ in backlight and touch controller.
++ Touch input support is provided by the goodix driver and needs to be
++ selected separately.
++
+ config DRM_PANEL_SITRONIX_ST7789V
+ tristate "Sitronix ST7789V panel"
+ depends on OF && SPI
+diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
+index 96a883cd66305..0519fdf0710d5 100644
+--- a/drivers/gpu/drm/panel/Makefile
++++ b/drivers/gpu/drm/panel/Makefile
+@@ -25,7 +25,6 @@ obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o
+ obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen.o
+ obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM67191) += panel-raydium-rm67191.o
+ obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o
+-obj-$(CONFIG_DRM_PANEL_ROCKTECH_JH057N00900) += panel-rocktech-jh057n00900.o
+ obj-$(CONFIG_DRM_PANEL_RONBO_RB070D30) += panel-ronbo-rb070d30.o
+ obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
+ obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D16D0) += panel-samsung-s6d16d0.o
+@@ -39,6 +38,7 @@ obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
+ obj-$(CONFIG_DRM_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
+ obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
+ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
++obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
+ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
+ obj-$(CONFIG_DRM_PANEL_SONY_ACX424AKP) += panel-sony-acx424akp.o
+ obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
+diff --git a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+similarity index 100%
+rename from drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
+rename to drivers/gpu/drm/panel/panel-sitronix-st7703.c
+--
+2.26.2
+
diff --git a/0005-drm-panel-st7703-Rename-functions-from-jh057n-prefix.patch b/0005-drm-panel-st7703-Rename-functions-from-jh057n-prefix.patch
new file mode 100644
index 000000000..5432e1bba
--- /dev/null
+++ b/0005-drm-panel-st7703-Rename-functions-from-jh057n-prefix.patch
@@ -0,0 +1,265 @@
+From 6fad8493b27ade51f37d88acc7ce6fd7dbc9da69 Mon Sep 17 00:00:00 2001
+From: Ondrej Jirman <megous@megous.com>
+Date: Fri, 26 Jun 2020 02:55:53 +0200
+Subject: [PATCH 05/13] drm/panel: st7703: Rename functions from jh057n prefix
+ to st7703
+
+This is done so that code that's not specific to a particular
+jh057n panel is named after the controller. Functions specific
+to the panel are kept named after the panel.
+
+Signed-off-by: Ondrej Jirman <megous@megous.com>
+---
+ drivers/gpu/drm/panel/panel-sitronix-st7703.c | 90 ++++++++++---------
+ 1 file changed, 46 insertions(+), 44 deletions(-)
+
+diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+index 38ff742bc1209..511af659f273b 100644
+--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
++++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+@@ -1,6 +1,8 @@
+ // SPDX-License-Identifier: GPL-2.0
+ /*
+- * Rockteck jh057n00900 5.5" MIPI-DSI panel driver
++ * Driver for panels based on Sitronix ST7703 controller, souch as:
++ *
++ * - Rocktech jh057n00900 5.5" MIPI-DSI panel
+ *
+ * Copyright (C) Purism SPC 2019
+ */
+@@ -21,7 +23,7 @@
+ #include <drm/drm_panel.h>
+ #include <drm/drm_print.h>
+
+-#define DRV_NAME "panel-rocktech-jh057n00900"
++#define DRV_NAME "panel-sitronix-st7703"
+
+ /* Manufacturer specific Commands send via DSI */
+ #define ST7703_CMD_ALL_PIXEL_OFF 0x22
+@@ -45,7 +47,7 @@
+ #define ST7703_CMD_SETGIP1 0xE9
+ #define ST7703_CMD_SETGIP2 0xEA
+
+-struct jh057n {
++struct st7703 {
+ struct device *dev;
+ struct drm_panel panel;
+ struct gpio_desc *reset_gpio;
+@@ -56,9 +58,9 @@ struct jh057n {
+ struct dentry *debugfs;
+ };
+
+-static inline struct jh057n *panel_to_jh057n(struct drm_panel *panel)
++static inline struct st7703 *panel_to_st7703(struct drm_panel *panel)
+ {
+- return container_of(panel, struct jh057n, panel);
++ return container_of(panel, struct st7703, panel);
+ }
+
+ #define dsi_generic_write_seq(dsi, seq...) do { \
+@@ -69,7 +71,7 @@ static inline struct jh057n *panel_to_jh057n(struct drm_panel *panel)
+ return ret; \
+ } while (0)
+
+-static int jh057n_init_sequence(struct jh057n *ctx)
++static int jh057n_init_sequence(struct st7703 *ctx)
+ {
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+ struct device *dev = ctx->dev;
+@@ -141,9 +143,9 @@ static int jh057n_init_sequence(struct jh057n *ctx)
+ return 0;
+ }
+
+-static int jh057n_enable(struct drm_panel *panel)
++static int st7703_enable(struct drm_panel *panel)
+ {
+- struct jh057n *ctx = panel_to_jh057n(panel);
++ struct st7703 *ctx = panel_to_st7703(panel);
+ int ret;
+
+ ret = jh057n_init_sequence(ctx);
+@@ -156,17 +158,17 @@ static int jh057n_enable(struct drm_panel *panel)
+ return 0;
+ }
+
+-static int jh057n_disable(struct drm_panel *panel)
++static int st7703_disable(struct drm_panel *panel)
+ {
+- struct jh057n *ctx = panel_to_jh057n(panel);
++ struct st7703 *ctx = panel_to_st7703(panel);
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+ return mipi_dsi_dcs_set_display_off(dsi);
+ }
+
+-static int jh057n_unprepare(struct drm_panel *panel)
++static int st7703_unprepare(struct drm_panel *panel)
+ {
+- struct jh057n *ctx = panel_to_jh057n(panel);
++ struct st7703 *ctx = panel_to_st7703(panel);
+
+ if (!ctx->prepared)
+ return 0;
+@@ -178,9 +180,9 @@ static int jh057n_unprepare(struct drm_panel *panel)
+ return 0;
+ }
+
+-static int jh057n_prepare(struct drm_panel *panel)
++static int st7703_prepare(struct drm_panel *panel)
+ {
+- struct jh057n *ctx = panel_to_jh057n(panel);
++ struct st7703 *ctx = panel_to_st7703(panel);
+ int ret;
+
+ if (ctx->prepared)
+@@ -230,10 +232,10 @@ static const struct drm_display_mode default_mode = {
+ .height_mm = 130,
+ };
+
+-static int jh057n_get_modes(struct drm_panel *panel,
++static int st7703_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+ {
+- struct jh057n *ctx = panel_to_jh057n(panel);
++ struct st7703 *ctx = panel_to_st7703(panel);
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(connector->dev, &default_mode);
+@@ -254,17 +256,17 @@ static int jh057n_get_modes(struct drm_panel *panel,
+ return 1;
+ }
+
+-static const struct drm_panel_funcs jh057n_drm_funcs = {
+- .disable = jh057n_disable,
+- .unprepare = jh057n_unprepare,
+- .prepare = jh057n_prepare,
+- .enable = jh057n_enable,
+- .get_modes = jh057n_get_modes,
++static const struct drm_panel_funcs st7703_drm_funcs = {
++ .disable = st7703_disable,
++ .unprepare = st7703_unprepare,
++ .prepare = st7703_prepare,
++ .enable = st7703_enable,
++ .get_modes = st7703_get_modes,
+ };
+
+ static int allpixelson_set(void *data, u64 val)
+ {
+- struct jh057n *ctx = data;
++ struct st7703 *ctx = data;
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+ DRM_DEV_DEBUG_DRIVER(ctx->dev, "Setting all pixels on\n");
+@@ -282,7 +284,7 @@ static int allpixelson_set(void *data, u64 val)
+ DEFINE_SIMPLE_ATTRIBUTE(allpixelson_fops, NULL,
+ allpixelson_set, "%llu\n");
+
+-static void jh057n_debugfs_init(struct jh057n *ctx)
++static void st7703_debugfs_init(struct st7703 *ctx)
+ {
+ ctx->debugfs = debugfs_create_dir(DRV_NAME, NULL);
+
+@@ -290,16 +292,16 @@ static void jh057n_debugfs_init(struct jh057n *ctx)
+ &allpixelson_fops);
+ }
+
+-static void jh057n_debugfs_remove(struct jh057n *ctx)
++static void st7703_debugfs_remove(struct st7703 *ctx)
+ {
+ debugfs_remove_recursive(ctx->debugfs);
+ ctx->debugfs = NULL;
+ }
+
+-static int jh057n_probe(struct mipi_dsi_device *dsi)
++static int st7703_probe(struct mipi_dsi_device *dsi)
+ {
+ struct device *dev = &dsi->dev;
+- struct jh057n *ctx;
++ struct st7703 *ctx;
+ int ret;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+@@ -340,7 +342,7 @@ static int jh057n_probe(struct mipi_dsi_device *dsi)
+ return ret;
+ }
+
+- drm_panel_init(&ctx->panel, dev, &jh057n_drm_funcs,
++ drm_panel_init(&ctx->panel, dev, &st7703_drm_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+
+ ret = drm_panel_of_backlight(&ctx->panel);
+@@ -363,13 +365,13 @@ static int jh057n_probe(struct mipi_dsi_device *dsi)
+ default_mode.vrefresh,
+ mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
+
+- jh057n_debugfs_init(ctx);
++ st7703_debugfs_init(ctx);
+ return 0;
+ }
+
+-static void jh057n_shutdown(struct mipi_dsi_device *dsi)
++static void st7703_shutdown(struct mipi_dsi_device *dsi)
+ {
+- struct jh057n *ctx = mipi_dsi_get_drvdata(dsi);
++ struct st7703 *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ret = drm_panel_unprepare(&ctx->panel);
+@@ -383,12 +385,12 @@ static void jh057n_shutdown(struct mipi_dsi_device *dsi)
+ ret);
+ }
+
+-static int jh057n_remove(struct mipi_dsi_device *dsi)
++static int st7703_remove(struct mipi_dsi_device *dsi)
+ {
+- struct jh057n *ctx = mipi_dsi_get_drvdata(dsi);
++ struct st7703 *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+- jh057n_shutdown(dsi);
++ st7703_shutdown(dsi);
+
+ ret = mipi_dsi_detach(dsi);
+ if (ret < 0)
+@@ -397,28 +399,28 @@ static int jh057n_remove(struct mipi_dsi_device *dsi)
+
+ drm_panel_remove(&ctx->panel);
+
+- jh057n_debugfs_remove(ctx);
++ st7703_debugfs_remove(ctx);
+
+ return 0;
+ }
+
+-static const struct of_device_id jh057n_of_match[] = {
++static const struct of_device_id st7703_of_match[] = {
+ { .compatible = "rocktech,jh057n00900" },
+ { /* sentinel */ }
+ };
+-MODULE_DEVICE_TABLE(of, jh057n_of_match);
++MODULE_DEVICE_TABLE(of, st7703_of_match);
+
+-static struct mipi_dsi_driver jh057n_driver = {
+- .probe = jh057n_probe,
+- .remove = jh057n_remove,
+- .shutdown = jh057n_shutdown,
++static struct mipi_dsi_driver st7703_driver = {
++ .probe = st7703_probe,
++ .remove = st7703_remove,
++ .shutdown = st7703_shutdown,
+ .driver = {
+ .name = DRV_NAME,
+- .of_match_table = jh057n_of_match,
++ .of_match_table = st7703_of_match,
+ },
+ };
+-module_mipi_dsi_driver(jh057n_driver);
++module_mipi_dsi_driver(st7703_driver);
+
+ MODULE_AUTHOR("Guido Günther <agx@sigxcpu.org>");
+-MODULE_DESCRIPTION("DRM driver for Rocktech JH057N00900 MIPI DSI panel");
++MODULE_DESCRIPTION("DRM driver for Sitronix ST7703 based MIPI DSI panels");
+ MODULE_LICENSE("GPL v2");
+--
+2.26.2
+
diff --git a/0006-drm-panel-st7703-Prepare-for-supporting-multiple-pan.patch b/0006-drm-panel-st7703-Prepare-for-supporting-multiple-pan.patch
new file mode 100644
index 000000000..8436ea3cb
--- /dev/null
+++ b/0006-drm-panel-st7703-Prepare-for-supporting-multiple-pan.patch
@@ -0,0 +1,129 @@
+From 19802e031428f7cf967259fdf8794a971164a44a Mon Sep 17 00:00:00 2001
+From: Ondrej Jirman <megous@megous.com>
+Date: Fri, 26 Jun 2020 02:55:54 +0200
+Subject: [PATCH 06/13] drm/panel: st7703: Prepare for supporting multiple
+ panels
+
+Parametrize the driver so that it can support more panels based
+on st7703 controller.
+
+Signed-off-by: Ondrej Jirman <megous@megous.com>
+---
+ drivers/gpu/drm/panel/panel-sitronix-st7703.c | 43 +++++++++++++------
+ 1 file changed, 31 insertions(+), 12 deletions(-)
+
+diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+index 511af659f273b..08cbc316266c1 100644
+--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
++++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+@@ -13,6 +13,7 @@
+ #include <linux/media-bus-format.h>
+ #include <linux/mod_devicetable.h>
+ #include <linux/module.h>
++#include <linux/of_device.h>
+ #include <linux/regulator/consumer.h>
+
+ #include <video/display_timing.h>
+@@ -56,6 +57,15 @@ struct st7703 {
+ bool prepared;
+
+ struct dentry *debugfs;
++ const struct st7703_panel_desc *desc;
++};
++
++struct st7703_panel_desc {
++ const struct drm_display_mode *mode;
++ unsigned int lanes;
++ unsigned long mode_flags;
++ enum mipi_dsi_pixel_format format;
++ int (*init_sequence)(struct st7703 *ctx);
+ };
+
+ static inline struct st7703 *panel_to_st7703(struct drm_panel *panel)
+@@ -148,7 +158,7 @@ static int st7703_enable(struct drm_panel *panel)
+ struct st7703 *ctx = panel_to_st7703(panel);
+ int ret;
+
+- ret = jh057n_init_sequence(ctx);
++ ret = ctx->desc->init_sequence(ctx);
+ if (ret < 0) {
+ DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
+ ret);
+@@ -216,7 +226,7 @@ static int st7703_prepare(struct drm_panel *panel)
+ return ret;
+ }
+
+-static const struct drm_display_mode default_mode = {
++static const struct drm_display_mode jh057n00900_mode = {
+ .hdisplay = 720,
+ .hsync_start = 720 + 90,
+ .hsync_end = 720 + 90 + 20,
+@@ -232,17 +242,26 @@ static const struct drm_display_mode default_mode = {
+ .height_mm = 130,
+ };
+
++struct st7703_panel_desc jh057n00900_panel_desc = {
++ .mode = &jh057n00900_mode,
++ .lanes = 4,
++ .mode_flags = MIPI_DSI_MODE_VIDEO |
++ MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
++ .format = MIPI_DSI_FMT_RGB888,
++ .init_sequence = jh057n_init_sequence,
++};
++
+ static int st7703_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+ {
+ struct st7703 *ctx = panel_to_st7703(panel);
+ struct drm_display_mode *mode;
+
+- mode = drm_mode_duplicate(connector->dev, &default_mode);
++ mode = drm_mode_duplicate(connector->dev, ctx->desc->mode);
+ if (!mode) {
+ DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n",
+- default_mode.hdisplay, default_mode.vdisplay,
+- default_mode.vrefresh);
++ ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
++ ctx->desc->mode->vrefresh);
+ return -ENOMEM;
+ }
+
+@@ -317,11 +336,11 @@ static int st7703_probe(struct mipi_dsi_device *dsi)
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ ctx->dev = dev;
++ ctx->desc = of_device_get_match_data(dev);
+
+- dsi->lanes = 4;
+- dsi->format = MIPI_DSI_FMT_RGB888;
+- dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
+- MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
++ dsi->mode_flags = ctx->desc->mode_flags;
++ dsi->format = ctx->desc->format;
++ dsi->lanes = ctx->desc->lanes;
+
+ ctx->vcc = devm_regulator_get(dev, "vcc");
+ if (IS_ERR(ctx->vcc)) {
+@@ -361,8 +380,8 @@ static int st7703_probe(struct mipi_dsi_device *dsi)
+ }
+
+ DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
+- default_mode.hdisplay, default_mode.vdisplay,
+- default_mode.vrefresh,
++ ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
++ ctx->desc->mode->vrefresh,
+ mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
+
+ st7703_debugfs_init(ctx);
+@@ -405,7 +424,7 @@ static int st7703_remove(struct mipi_dsi_device *dsi)
+ }
+
+ static const struct of_device_id st7703_of_match[] = {
+- { .compatible = "rocktech,jh057n00900" },
++ { .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc },
+ { /* sentinel */ }
+ };
+ MODULE_DEVICE_TABLE(of, st7703_of_match);
+--
+2.26.2
+
diff --git a/0007-drm-panel-st7703-Move-code-specific-to-jh057n-closer.patch b/0007-drm-panel-st7703-Move-code-specific-to-jh057n-closer.patch
new file mode 100644
index 000000000..fcdf0482d
--- /dev/null
+++ b/0007-drm-panel-st7703-Move-code-specific-to-jh057n-closer.patch
@@ -0,0 +1,84 @@
+From b93e129534a0556a03a343f95e622ae9c3893854 Mon Sep 17 00:00:00 2001
+From: Ondrej Jirman <megous@megous.com>
+Date: Fri, 26 Jun 2020 02:55:55 +0200
+Subject: [PATCH 07/13] drm/panel: st7703: Move code specific to jh057n closer
+ together
+
+It's better than having it spread around the driver.
+
+Signed-off-by: Ondrej Jirman <megous@megous.com>
+---
+ drivers/gpu/drm/panel/panel-sitronix-st7703.c | 50 +++++++++----------
+ 1 file changed, 25 insertions(+), 25 deletions(-)
+
+diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+index 08cbc316266c1..d03aab10cfef1 100644
+--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
++++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+@@ -153,6 +153,31 @@ static int jh057n_init_sequence(struct st7703 *ctx)
+ return 0;
+ }
+
++static const struct drm_display_mode jh057n00900_mode = {
++ .hdisplay = 720,
++ .hsync_start = 720 + 90,
++ .hsync_end = 720 + 90 + 20,
++ .htotal = 720 + 90 + 20 + 20,
++ .vdisplay = 1440,
++ .vsync_start = 1440 + 20,
++ .vsync_end = 1440 + 20 + 4,
++ .vtotal = 1440 + 20 + 4 + 12,
++ .vrefresh = 60,
++ .clock = 75276,
++ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
++ .width_mm = 65,
++ .height_mm = 130,
++};
++
++struct st7703_panel_desc jh057n00900_panel_desc = {
++ .mode = &jh057n00900_mode,
++ .lanes = 4,
++ .mode_flags = MIPI_DSI_MODE_VIDEO |
++ MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
++ .format = MIPI_DSI_FMT_RGB888,
++ .init_sequence = jh057n_init_sequence,
++};
++
+ static int st7703_enable(struct drm_panel *panel)
+ {
+ struct st7703 *ctx = panel_to_st7703(panel);
+@@ -226,31 +251,6 @@ static int st7703_prepare(struct drm_panel *panel)
+ return ret;
+ }
+
+-static const struct drm_display_mode jh057n00900_mode = {
+- .hdisplay = 720,
+- .hsync_start = 720 + 90,
+- .hsync_end = 720 + 90 + 20,
+- .htotal = 720 + 90 + 20 + 20,
+- .vdisplay = 1440,
+- .vsync_start = 1440 + 20,
+- .vsync_end = 1440 + 20 + 4,
+- .vtotal = 1440 + 20 + 4 + 12,
+- .vrefresh = 60,
+- .clock = 75276,
+- .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+- .width_mm = 65,
+- .height_mm = 130,
+-};
+-
+-struct st7703_panel_desc jh057n00900_panel_desc = {
+- .mode = &jh057n00900_mode,
+- .lanes = 4,
+- .mode_flags = MIPI_DSI_MODE_VIDEO |
+- MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
+- .format = MIPI_DSI_FMT_RGB888,
+- .init_sequence = jh057n_init_sequence,
+-};
+-
+ static int st7703_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+ {
+--
+2.26.2
+
diff --git a/0008-drm-panel-st7703-Move-generic-part-of-init-sequence-.patch b/0008-drm-panel-st7703-Move-generic-part-of-init-sequence-.patch
new file mode 100644
index 000000000..bae442451
--- /dev/null
+++ b/0008-drm-panel-st7703-Move-generic-part-of-init-sequence-.patch
@@ -0,0 +1,84 @@
+From 5e9a6f49f8056963a4b8d2408f0c0f211cdab799 Mon Sep 17 00:00:00 2001
+From: Ondrej Jirman <megous@megous.com>
+Date: Fri, 26 Jun 2020 02:55:56 +0200
+Subject: [PATCH 08/13] drm/panel: st7703: Move generic part of init sequence
+ to enable callback
+
+Calling sleep out and display on is a controller specific part
+of the initialization process. Move it out of the panel specific
+initialization function to the enable callback.
+
+Signed-off-by: Ondrej Jirman <megous@megous.com>
+---
+ drivers/gpu/drm/panel/panel-sitronix-st7703.c | 33 ++++++++++---------
+ 1 file changed, 18 insertions(+), 15 deletions(-)
+
+diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+index d03aab10cfef1..cdbf7dfb4dd48 100644
+--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
++++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+@@ -84,8 +84,6 @@ static inline struct st7703 *panel_to_st7703(struct drm_panel *panel)
+ static int jh057n_init_sequence(struct st7703 *ctx)
+ {
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+- struct device *dev = ctx->dev;
+- int ret;
+
+ /*
+ * Init sequence was supplied by the panel vendor. Most of the commands
+@@ -136,20 +134,7 @@ static int jh057n_init_sequence(struct st7703 *ctx)
+ 0x18, 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41,
+ 0x37, 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10,
+ 0x11, 0x18);
+- msleep(20);
+-
+- ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+- if (ret < 0) {
+- DRM_DEV_ERROR(dev, "Failed to exit sleep mode: %d\n", ret);
+- return ret;
+- }
+- /* Panel is operational 120 msec after reset */
+- msleep(60);
+- ret = mipi_dsi_dcs_set_display_on(dsi);
+- if (ret)
+- return ret;
+
+- DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n");
+ return 0;
+ }
+
+@@ -181,6 +166,7 @@ struct st7703_panel_desc jh057n00900_panel_desc = {
+ static int st7703_enable(struct drm_panel *panel)
+ {
+ struct st7703 *ctx = panel_to_st7703(panel);
++ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+ int ret;
+
+ ret = ctx->desc->init_sequence(ctx);
+@@ -190,6 +176,23 @@ static int st7703_enable(struct drm_panel *panel)
+ return ret;
+ }
+
++ msleep(20);
++
++ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
++ if (ret < 0) {
++ DRM_DEV_ERROR(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
++ return ret;
++ }
++
++ /* Panel is operational 120 msec after reset */
++ msleep(60);
++
++ ret = mipi_dsi_dcs_set_display_on(dsi);
++ if (ret)
++ return ret;
++
++ DRM_DEV_DEBUG_DRIVER(ctx->dev, "Panel init sequence done\n");
++
+ return 0;
+ }
+
+--
+2.26.2
+
diff --git a/0009-drm-panel-st7703-Add-support-for-Xingbangda-XBD599.patch b/0009-drm-panel-st7703-Add-support-for-Xingbangda-XBD599.patch
new file mode 100644
index 000000000..5ac4e6ee8
--- /dev/null
+++ b/0009-drm-panel-st7703-Add-support-for-Xingbangda-XBD599.patch
@@ -0,0 +1,251 @@
+From d2fb5b980f071d542ca912dac5a0e27c49de7e2d Mon Sep 17 00:00:00 2001
+From: Ondrej Jirman <megous@megous.com>
+Date: Fri, 26 Jun 2020 02:55:57 +0200
+Subject: [PATCH 09/13] drm/panel: st7703: Add support for Xingbangda XBD599
+
+Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel used in
+PinePhone. Add support for it.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
+Signed-off-by: Ondrej Jirman <megous@megous.com>
+---
+ drivers/gpu/drm/panel/panel-sitronix-st7703.c | 199 +++++++++++++++++-
+ 1 file changed, 197 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+index cdbf7dfb4dd48..33611419059a9 100644
+--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
++++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+@@ -39,10 +39,11 @@
+ #define ST7703_CMD_SETEXTC 0xB9
+ #define ST7703_CMD_SETMIPI 0xBA
+ #define ST7703_CMD_SETVDC 0xBC
+-#define ST7703_CMD_UNKNOWN0 0xBF
++#define ST7703_CMD_UNKNOWN_BF 0xBF
+ #define ST7703_CMD_SETSCR 0xC0
+ #define ST7703_CMD_SETPOWER 0xC1
+ #define ST7703_CMD_SETPANEL 0xCC
++#define ST7703_CMD_UNKNOWN_C6 0xC6
+ #define ST7703_CMD_SETGAMMA 0xE0
+ #define ST7703_CMD_SETEQ 0xE3
+ #define ST7703_CMD_SETGIP1 0xE9
+@@ -109,7 +110,7 @@ static int jh057n_init_sequence(struct st7703 *ctx)
+ msleep(20);
+
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F);
+- dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN0, 0x02, 0x11, 0x00);
++ dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1,
+ 0x82, 0x10, 0x06, 0x05, 0x9E, 0x0A, 0xA5, 0x12,
+ 0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
+@@ -163,6 +164,199 @@ struct st7703_panel_desc jh057n00900_panel_desc = {
+ .init_sequence = jh057n_init_sequence,
+ };
+
++#define dsi_dcs_write_seq(dsi, cmd, seq...) do { \
++ static const u8 d[] = { seq }; \
++ int ret; \
++ ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d)); \
++ if (ret < 0) \
++ return ret; \
++ } while (0)
++
++
++static int xbd599_init_sequence(struct st7703 *ctx)
++{
++ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
++
++ /*
++ * Init sequence was supplied by the panel vendor.
++ */
++
++ /* Magic sequence to unlock user commands below. */
++ dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xF1, 0x12, 0x83);
++
++ dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI,
++ 0x33, /* VC_main = 0, Lane_Number = 3 (4 lanes) */
++ 0x81, /* DSI_LDO_SEL = 1.7V, RTERM = 90 Ohm */
++ 0x05, /* IHSRX = x6 (Low High Speed driving ability) */
++ 0xF9, /* TX_CLK_SEL = fDSICLK/16 */
++ 0x0E, /* HFP_OSC (min. HFP number in DSI mode) */
++ 0x0E, /* HBP_OSC (min. HBP number in DSI mode) */
++ /* The rest is undocumented in ST7703 datasheet */
++ 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++ 0x44, 0x25, 0x00, 0x91, 0x0a, 0x00, 0x00, 0x02,
++ 0x4F, 0x11, 0x00, 0x00, 0x37);
++
++ dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT,
++ 0x25, /* PCCS = 2, ECP_DC_DIV = 1/4 HSYNC */
++ 0x22, /* DT = 15ms XDK_ECP = x2 */
++ 0x20, /* PFM_DC_DIV = /1 */
++ 0x03 /* ECP_SYNC_EN = 1, VGX_SYNC_EN = 1 */);
++
++ /* RGB I/F porch timing */
++ dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF,
++ 0x10, /* VBP_RGB_GEN */
++ 0x10, /* VFP_RGB_GEN */
++ 0x05, /* DE_BP_RGB_GEN */
++ 0x05, /* DE_FP_RGB_GEN */
++ /* The rest is undocumented in ST7703 datasheet */
++ 0x03, 0xFF,
++ 0x00, 0x00,
++ 0x00, 0x00);
++
++ /* Source driving settings. */
++ dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR,
++ 0x73, /* N_POPON */
++ 0x73, /* N_NOPON */
++ 0x50, /* I_POPON */
++ 0x50, /* I_NOPON */
++ 0x00, /* SCR[31,24] */
++ 0xC0, /* SCR[23,16] */
++ 0x08, /* SCR[15,8] */
++ 0x70, /* SCR[7,0] */
++ 0x00 /* Undocumented */);
++
++ /* NVDDD_SEL = -1.8V, VDDD_SEL = out of range (possibly 1.9V?) */
++ dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
++
++ /*
++ * SS_PANEL = 1 (reverse scan), GS_PANEL = 0 (normal scan)
++ * REV_PANEL = 1 (normally black panel), BGR_PANEL = 1 (BGR)
++ */
++ dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
++
++ /* Zig-Zag Type C column inversion. */
++ dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
++
++ /* Set display resolution. */
++ dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP,
++ 0xF0, /* NL = 240 */
++ 0x12, /* RES_V_LSB = 0, BLK_CON = VSSD,
++ * RESO_SEL = 720RGB
++ */
++ 0xF0 /* WHITE_GND_EN = 1 (GND),
++ * WHITE_FRAME_SEL = 7 frames,
++ * ISC = 0 frames
++ */);
++
++ dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ,
++ 0x00, /* PNOEQ */
++ 0x00, /* NNOEQ */
++ 0x0B, /* PEQGND */
++ 0x0B, /* NEQGND */
++ 0x10, /* PEQVCI */
++ 0x10, /* NEQVCI */
++ 0x00, /* PEQVCI1 */
++ 0x00, /* NEQVCI1 */
++ 0x00, /* reserved */
++ 0x00, /* reserved */
++ 0xFF, /* reserved */
++ 0x00, /* reserved */
++ 0xC0, /* ESD_DET_DATA_WHITE = 1, ESD_WHITE_EN = 1 */
++ 0x10 /* SLPIN_OPTION = 1 (no need vsync after sleep-in)
++ * VEDIO_NO_CHECK_EN = 0
++ * ESD_WHITE_GND_EN = 0
++ * ESD_DET_TIME_SEL = 0 frames
++ */);
++
++ /* Undocumented command. */
++ dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_C6, 0x01, 0x00, 0xFF, 0xFF, 0x00);
++
++ dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
++ 0x74, /* VBTHS, VBTLS: VGH = 17V, VBL = -11V */
++ 0x00, /* FBOFF_VGH = 0, FBOFF_VGL = 0 */
++ 0x32, /* VRP */
++ 0x32, /* VRN */
++ 0x77, /* reserved */
++ 0xF1, /* APS = 1 (small),
++ * VGL_DET_EN = 1, VGH_DET_EN = 1,
++ * VGL_TURBO = 1, VGH_TURBO = 1
++ */
++ 0xFF, /* VGH1_L_DIV, VGL1_L_DIV (1.5MHz) */
++ 0xFF, /* VGH1_R_DIV, VGL1_R_DIV (1.5MHz) */
++ 0xCC, /* VGH2_L_DIV, VGL2_L_DIV (2.6MHz) */
++ 0xCC, /* VGH2_R_DIV, VGL2_R_DIV (2.6MHz) */
++ 0x77, /* VGH3_L_DIV, VGL3_L_DIV (4.5MHz) */
++ 0x77 /* VGH3_R_DIV, VGL3_R_DIV (4.5MHz) */);
++
++ /* Reference voltage. */
++ dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP,
++ 0x07, /* VREF_SEL = 4.2V */
++ 0x07 /* NVREF_SEL = 4.2V */);
++
++ dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM,
++ 0x2C, /* VCOMDC_F = -0.67V */
++ 0x2C /* VCOMDC_B = -0.67V */);
++
++ /* Undocumented command. */
++ dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
++
++ /* This command is to set forward GIP timing. */
++ dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1,
++ 0x82, 0x10, 0x06, 0x05, 0xA2, 0x0A, 0xA5, 0x12,
++ 0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
++ 0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
++ 0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88,
++ 0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64,
++ 0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
++ 0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
++
++ /* This command is to set backward GIP timing. */
++ dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2,
++ 0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++ 0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
++ 0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
++ 0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
++ 0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00,
++ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x0A,
++ 0xA5, 0x00, 0x00, 0x00, 0x00);
++
++ /* Adjust the gamma characteristics of the panel. */
++ dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA,
++ 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41, 0x35,
++ 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12, 0x12,
++ 0x18, 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41,
++ 0x35, 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12,
++ 0x12, 0x18);
++
++ return 0;
++}
++
++static const struct drm_display_mode xbd599_mode = {
++ .hdisplay = 720,
++ .hsync_start = 720 + 40,
++ .hsync_end = 720 + 40 + 40,
++ .htotal = 720 + 40 + 40 + 40,
++ .vdisplay = 1440,
++ .vsync_start = 1440 + 18,
++ .vsync_end = 1440 + 18 + 10,
++ .vtotal = 1440 + 18 + 10 + 17,
++ .vrefresh = 60,
++ .clock = 69000,
++ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
++ .width_mm = 68,
++ .height_mm = 136,
++};
++
++static const struct st7703_panel_desc xbd599_desc = {
++ .mode = &xbd599_mode,
++ .lanes = 4,
++ .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
++ .format = MIPI_DSI_FMT_RGB888,
++ .init_sequence = xbd599_init_sequence,
++};
++
+ static int st7703_enable(struct drm_panel *panel)
+ {
+ struct st7703 *ctx = panel_to_st7703(panel);
+@@ -428,6 +622,7 @@ static int st7703_remove(struct mipi_dsi_device *dsi)
+
+ static const struct of_device_id st7703_of_match[] = {
+ { .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc },
++ { .compatible = "xingbangda,xbd599", .data = &xbd599_desc },
+ { /* sentinel */ }
+ };
+ MODULE_DEVICE_TABLE(of, st7703_of_match);
+--
+2.26.2
+
diff --git a/0010-drm-panel-st7703-Enter-sleep-after-display-off.patch b/0010-drm-panel-st7703-Enter-sleep-after-display-off.patch
new file mode 100644
index 000000000..867962865
--- /dev/null
+++ b/0010-drm-panel-st7703-Enter-sleep-after-display-off.patch
@@ -0,0 +1,41 @@
+From 7c9c58114d277e570f667ac670ef28725e51814e Mon Sep 17 00:00:00 2001
+From: Ondrej Jirman <megous@megous.com>
+Date: Fri, 26 Jun 2020 02:55:58 +0200
+Subject: [PATCH 10/13] drm/panel: st7703: Enter sleep after display off
+
+The datasheet suggests to issue sleep in after display off
+as a part of the panel's shutdown sequence.
+
+Signed-off-by: Ondrej Jirman <megous@megous.com>
+---
+ drivers/gpu/drm/panel/panel-sitronix-st7703.c | 13 ++++++++++++-
+ 1 file changed, 12 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+index 33611419059a9..e771281eb5472 100644
+--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
++++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+@@ -394,8 +394,19 @@ static int st7703_disable(struct drm_panel *panel)
+ {
+ struct st7703 *ctx = panel_to_st7703(panel);
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
++ int ret;
++
++ ret = mipi_dsi_dcs_set_display_off(dsi);
++ if (ret < 0)
++ DRM_DEV_ERROR(ctx->dev,
++ "Failed to turn off the display: %d\n", ret);
+
+- return mipi_dsi_dcs_set_display_off(dsi);
++ ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
++ if (ret < 0)
++ DRM_DEV_ERROR(ctx->dev,
++ "Failed to enter sleep mode: %d\n", ret);
++
++ return 0;
+ }
+
+ static int st7703_unprepare(struct drm_panel *panel)
+--
+2.26.2
+
diff --git a/0011-drm-panel-st7703-Assert-reset-prior-to-powering-down.patch b/0011-drm-panel-st7703-Assert-reset-prior-to-powering-down.patch
new file mode 100644
index 000000000..f5871906c
--- /dev/null
+++ b/0011-drm-panel-st7703-Assert-reset-prior-to-powering-down.patch
@@ -0,0 +1,29 @@
+From f290f11b42df0d9d42679b93bb6a488f9e12e00d Mon Sep 17 00:00:00 2001
+From: Ondrej Jirman <megous@megous.com>
+Date: Fri, 26 Jun 2020 02:55:59 +0200
+Subject: [PATCH 11/13] drm/panel: st7703: Assert reset prior to powering down
+ the regulators
+
+The reset pin is inverted, so if we don't assert reset, the actual gpio
+will be high and may keep driving the IO port of the panel.
+
+Signed-off-by: Ondrej Jirman <megous@megous.com>
+---
+ drivers/gpu/drm/panel/panel-sitronix-st7703.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+index e771281eb5472..92930e1275592 100644
+--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
++++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+@@ -416,6 +416,7 @@ static int st7703_unprepare(struct drm_panel *panel)
+ if (!ctx->prepared)
+ return 0;
+
++ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ regulator_disable(ctx->iovcc);
+ regulator_disable(ctx->vcc);
+ ctx->prepared = false;
+--
+2.26.2
+
diff --git a/0012-arm64-dts-sun50i-a64-pinephone-Enable-LCD-support-on.patch b/0012-arm64-dts-sun50i-a64-pinephone-Enable-LCD-support-on.patch
new file mode 100644
index 000000000..0c8ca994e
--- /dev/null
+++ b/0012-arm64-dts-sun50i-a64-pinephone-Enable-LCD-support-on.patch
@@ -0,0 +1,112 @@
+From 3ac5eb0c8bc2da9e81e04fc6106a79b476ec9219 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy@aosc.io>
+Date: Fri, 26 Jun 2020 02:56:00 +0200
+Subject: [PATCH 12/13] arm64: dts: sun50i-a64-pinephone: Enable LCD support on
+ PinePhone
+
+PinePhone uses PWM backlight and a XBD599 LCD panel over DSI for
+display.
+
+Backlight levels curve was optimized by Martijn Braam using a
+lux meter.
+
+Add its device nodes.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
+Signed-off-by: Martijn Braam <martijn@brixit.nl>
+Signed-off-by: Ondrej Jirman <megous@megous.com>
+---
+ .../allwinner/sun50i-a64-pinephone-1.1.dts | 19 ++++++++++
+ .../dts/allwinner/sun50i-a64-pinephone.dtsi | 35 +++++++++++++++++++
+ 2 files changed, 54 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
+index 06a775c41664b..3e99a87e9ce52 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
+@@ -9,3 +9,22 @@ / {
+ model = "Pine64 PinePhone Braveheart (1.1)";
+ compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64";
+ };
++
++&backlight {
++ power-supply = <&reg_ldo_io0>;
++ /*
++ * PWM backlight circuit on this PinePhone revision was changed since
++ * 1.0, and the lowest PWM duty cycle that doesn't lead to backlight
++ * being off is around 20%. Duty cycle for the lowest brightness level
++ * also varries quite a bit between individual boards, so the lowest
++ * value here was chosen as a safe default.
++ */
++ brightness-levels = <
++ 774 793 814 842
++ 882 935 1003 1088
++ 1192 1316 1462 1633
++ 1830 2054 2309 2596
++ 2916 3271 3664 4096>;
++ num-interpolated-steps = <50>;
++ default-brightness-level = <400>;
++};
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+index cefda145c3c9d..85a7aa5efd326 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+@@ -16,6 +16,13 @@ aliases {
+ serial0 = &uart0;
+ };
+
++ backlight: backlight {
++ compatible = "pwm-backlight";
++ pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
++ enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
++ /* Backlight configuration differs per PinePhone revision. */
++ };
++
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+@@ -84,6 +91,30 @@ &dai {
+ status = "okay";
+ };
+
++&de {
++ status = "okay";
++};
++
++&dphy {
++ status = "okay";
++};
++
++&dsi {
++ vcc-dsi-supply = <&reg_dldo1>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "okay";
++
++ panel@0 {
++ compatible = "xingbangda,xbd599";
++ reg = <0>;
++ reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
++ iovcc-supply = <&reg_dldo2>;
++ vcc-supply = <&reg_ldo_io0>;
++ backlight = <&backlight>;
++ };
++};
++
+ &ehci0 {
+ status = "okay";
+ };
+@@ -188,6 +219,10 @@ &r_pio {
+ */
+ };
+
++&r_pwm {
++ status = "okay";
++};
++
+ &r_rsb {
+ status = "okay";
+
+--
+2.26.2
+
diff --git a/0013-arm64-dts-sun50i-a64-pinephone-Add-touchscreen-suppo.patch b/0013-arm64-dts-sun50i-a64-pinephone-Add-touchscreen-suppo.patch
new file mode 100644
index 000000000..211eb2797
--- /dev/null
+++ b/0013-arm64-dts-sun50i-a64-pinephone-Add-touchscreen-suppo.patch
@@ -0,0 +1,47 @@
+From 786358ed986e4788b992d98e1d3b198a4e01a9d5 Mon Sep 17 00:00:00 2001
+From: Ondrej Jirman <megous@megous.com>
+Date: Fri, 26 Jun 2020 02:56:01 +0200
+Subject: [PATCH 13/13] arm64: dts: sun50i-a64-pinephone: Add touchscreen
+ support
+
+Pinephone has a Goodix GT917S capacitive touchscreen controller on
+I2C0 bus. Add support for it.
+
+Signed-off-by: Ondrej Jirman <megous@megous.com>
+---
+ .../dts/allwinner/sun50i-a64-pinephone.dtsi | 19 +++++++++++++++++++
+ 1 file changed, 19 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+index 85a7aa5efd326..2d5694446d176 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+@@ -123,6 +123,25 @@ &ehci1 {
+ status = "okay";
+ };
+
++&i2c0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c0_pins>;
++ status = "okay";
++
++ touchscreen@5d {
++ compatible = "goodix,gt917s", "goodix,gt911";
++ reg = <0x5d>;
++ interrupt-parent = <&pio>;
++ interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
++ irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
++ reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
++ AVDD28-supply = <&reg_ldo_io0>;
++ VDDIO-supply = <&reg_ldo_io0>;
++ touchscreen-size-x = <720>;
++ touchscreen-size-y = <1440>;
++ };
++};
++
+ &i2c1 {
+ status = "okay";
+
+--
+2.26.2
+
diff --git a/configs/fedora/generic/CONFIG_DRM_PANEL_ROCKTECH_JH057N00900 b/configs/fedora/generic/CONFIG_DRM_PANEL_ROCKTECH_JH057N00900
deleted file mode 100644
index 070c7734f..000000000
--- a/configs/fedora/generic/CONFIG_DRM_PANEL_ROCKTECH_JH057N00900
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_DRM_PANEL_ROCKTECH_JH057N00900=m
diff --git a/configs/fedora/generic/CONFIG_DRM_PANEL_SITRONIX_ST7703 b/configs/fedora/generic/CONFIG_DRM_PANEL_SITRONIX_ST7703
new file mode 100644
index 000000000..aa14cabc0
--- /dev/null
+++ b/configs/fedora/generic/CONFIG_DRM_PANEL_SITRONIX_ST7703
@@ -0,0 +1 @@
+CONFIG_DRM_PANEL_SITRONIX_ST7703=m
diff --git a/configs/fedora/generic/CONFIG_DRM_PANEL_XINGBANGDA_XBD599 b/configs/fedora/generic/CONFIG_DRM_PANEL_XINGBANGDA_XBD599
deleted file mode 100644
index b3e186e66..000000000
--- a/configs/fedora/generic/CONFIG_DRM_PANEL_XINGBANGDA_XBD599
+++ /dev/null
@@ -1 +0,0 @@
-# CONFIG_DRM_PANEL_XINGBANGDA_XBD599 is not set
diff --git a/configs/fedora/generic/CONFIG_SERIAL_SC16IS7XX_I2C b/configs/fedora/generic/CONFIG_SERIAL_SC16IS7XX_I2C
index 725798c75..80373470c 100644
--- a/configs/fedora/generic/CONFIG_SERIAL_SC16IS7XX_I2C
+++ b/configs/fedora/generic/CONFIG_SERIAL_SC16IS7XX_I2C
@@ -1 +1 @@
-CONFIG_SERIAL_SC16IS7XX_I2C=y
+# CONFIG_SERIAL_SC16IS7XX_I2C is not set
diff --git a/configs/fedora/generic/arm/aarch64/CONFIG_DRM_PANEL_XINGBANGDA_XBD599 b/configs/fedora/generic/arm/aarch64/CONFIG_DRM_PANEL_XINGBANGDA_XBD599
deleted file mode 100644
index aba5e985e..000000000
--- a/configs/fedora/generic/arm/aarch64/CONFIG_DRM_PANEL_XINGBANGDA_XBD599
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_DRM_PANEL_XINGBANGDA_XBD599=m
diff --git a/kernel-aarch64-debug-fedora.config b/kernel-aarch64-debug-fedora.config
index 5cb7d5a23..864d2584c 100644
--- a/kernel-aarch64-debug-fedora.config
+++ b/kernel-aarch64-debug-fedora.config
@@ -1600,7 +1600,6 @@ CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=m
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m
# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
-CONFIG_DRM_PANEL_ROCKTECH_JH057N00900=m
CONFIG_DRM_PANEL_RONBO_RB070D30=m
CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
@@ -1615,6 +1614,7 @@ CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_PANEL_SITRONIX_ST7701=m
+CONFIG_DRM_PANEL_SITRONIX_ST7703=m
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
# CONFIG_DRM_PANEL_SONY_ACX424AKP is not set
# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
@@ -1622,7 +1622,6 @@ CONFIG_DRM_PANEL_SITRONIX_ST7701=m
# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
CONFIG_DRM_PANEL_TPO_TPG110=m
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
-CONFIG_DRM_PANEL_XINGBANGDA_XBD599=m
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
CONFIG_DRM_PANEL=y
CONFIG_DRM_PANFROST=m
@@ -5850,7 +5849,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_QCOM_GENI_CONSOLE=y
CONFIG_SERIAL_QCOM_GENI=y
# CONFIG_SERIAL_RP2 is not set
-CONFIG_SERIAL_SC16IS7XX_I2C=y
+# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_SPI=y
# CONFIG_SERIAL_SCCNXP is not set
diff --git a/kernel-aarch64-fedora.config b/kernel-aarch64-fedora.config
index 4c227ecc2..3b8207cce 100644
--- a/kernel-aarch64-fedora.config
+++ b/kernel-aarch64-fedora.config
@@ -1592,7 +1592,6 @@ CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=m
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m
# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
-CONFIG_DRM_PANEL_ROCKTECH_JH057N00900=m
CONFIG_DRM_PANEL_RONBO_RB070D30=m
CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
@@ -1607,6 +1606,7 @@ CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_PANEL_SITRONIX_ST7701=m
+CONFIG_DRM_PANEL_SITRONIX_ST7703=m
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
# CONFIG_DRM_PANEL_SONY_ACX424AKP is not set
# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
@@ -1614,7 +1614,6 @@ CONFIG_DRM_PANEL_SITRONIX_ST7701=m
# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
CONFIG_DRM_PANEL_TPO_TPG110=m
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
-CONFIG_DRM_PANEL_XINGBANGDA_XBD599=m
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
CONFIG_DRM_PANEL=y
CONFIG_DRM_PANFROST=m
@@ -5829,7 +5828,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_QCOM_GENI_CONSOLE=y
CONFIG_SERIAL_QCOM_GENI=y
# CONFIG_SERIAL_RP2 is not set
-CONFIG_SERIAL_SC16IS7XX_I2C=y
+# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_SPI=y
# CONFIG_SERIAL_SCCNXP is not set
diff --git a/kernel-armv7hl-debug-fedora.config b/kernel-armv7hl-debug-fedora.config
index 2fa1e0d08..bfb6b2fb5 100644
--- a/kernel-armv7hl-debug-fedora.config
+++ b/kernel-armv7hl-debug-fedora.config
@@ -1613,7 +1613,6 @@ CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=m
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m
# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
-CONFIG_DRM_PANEL_ROCKTECH_JH057N00900=m
CONFIG_DRM_PANEL_RONBO_RB070D30=m
CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
@@ -1628,6 +1627,7 @@ CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_PANEL_SITRONIX_ST7701=m
+CONFIG_DRM_PANEL_SITRONIX_ST7703=m
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
# CONFIG_DRM_PANEL_SONY_ACX424AKP is not set
# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
@@ -1635,7 +1635,6 @@ CONFIG_DRM_PANEL_SITRONIX_ST7701=m
# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
CONFIG_DRM_PANEL_TPO_TPG110=m
# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
-# CONFIG_DRM_PANEL_XINGBANGDA_XBD599 is not set
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
CONFIG_DRM_PANEL=y
CONFIG_DRM_PANFROST=m
@@ -5968,7 +5967,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_RP2 is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SC16IS7XX_I2C=y
+# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_SPI=y
# CONFIG_SERIAL_SCCNXP is not set
diff --git a/kernel-armv7hl-fedora.config b/kernel-armv7hl-fedora.config
index 5ecf9e1d3..aad6dce32 100644
--- a/kernel-armv7hl-fedora.config
+++ b/kernel-armv7hl-fedora.config
@@ -1606,7 +1606,6 @@ CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=m
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m
# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
-CONFIG_DRM_PANEL_ROCKTECH_JH057N00900=m
CONFIG_DRM_PANEL_RONBO_RB070D30=m
CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
@@ -1621,6 +1620,7 @@ CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_PANEL_SITRONIX_ST7701=m
+CONFIG_DRM_PANEL_SITRONIX_ST7703=m
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
# CONFIG_DRM_PANEL_SONY_ACX424AKP is not set
# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
@@ -1628,7 +1628,6 @@ CONFIG_DRM_PANEL_SITRONIX_ST7701=m
# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
CONFIG_DRM_PANEL_TPO_TPG110=m
# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
-# CONFIG_DRM_PANEL_XINGBANGDA_XBD599 is not set
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
CONFIG_DRM_PANEL=y
CONFIG_DRM_PANFROST=m
@@ -5948,7 +5947,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_RP2 is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SC16IS7XX_I2C=y
+# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_SPI=y
# CONFIG_SERIAL_SCCNXP is not set
diff --git a/kernel-armv7hl-lpae-debug-fedora.config b/kernel-armv7hl-lpae-debug-fedora.config
index 106287038..05778dcc2 100644
--- a/kernel-armv7hl-lpae-debug-fedora.config
+++ b/kernel-armv7hl-lpae-debug-fedora.config
@@ -1568,7 +1568,6 @@ CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=m
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m
# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
-CONFIG_DRM_PANEL_ROCKTECH_JH057N00900=m
CONFIG_DRM_PANEL_RONBO_RB070D30=m
CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
@@ -1583,6 +1582,7 @@ CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_PANEL_SITRONIX_ST7701=m
+CONFIG_DRM_PANEL_SITRONIX_ST7703=m
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
# CONFIG_DRM_PANEL_SONY_ACX424AKP is not set
# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
@@ -1590,7 +1590,6 @@ CONFIG_DRM_PANEL_SITRONIX_ST7701=m
# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
CONFIG_DRM_PANEL_TPO_TPG110=m
# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
-# CONFIG_DRM_PANEL_XINGBANGDA_XBD599 is not set
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
CONFIG_DRM_PANEL=y
CONFIG_DRM_PANFROST=m
@@ -5779,7 +5778,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_RP2 is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SC16IS7XX_I2C=y
+# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_SPI=y
# CONFIG_SERIAL_SCCNXP is not set
diff --git a/kernel-armv7hl-lpae-fedora.config b/kernel-armv7hl-lpae-fedora.config
index 971d2f455..f485c88d6 100644
--- a/kernel-armv7hl-lpae-fedora.config
+++ b/kernel-armv7hl-lpae-fedora.config
@@ -1561,7 +1561,6 @@ CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=m
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m
# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
-CONFIG_DRM_PANEL_ROCKTECH_JH057N00900=m
CONFIG_DRM_PANEL_RONBO_RB070D30=m
CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
@@ -1576,6 +1575,7 @@ CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_PANEL_SITRONIX_ST7701=m
+CONFIG_DRM_PANEL_SITRONIX_ST7703=m
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
# CONFIG_DRM_PANEL_SONY_ACX424AKP is not set
# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
@@ -1583,7 +1583,6 @@ CONFIG_DRM_PANEL_SITRONIX_ST7701=m
# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
CONFIG_DRM_PANEL_TPO_TPG110=m
# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
-# CONFIG_DRM_PANEL_XINGBANGDA_XBD599 is not set
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
CONFIG_DRM_PANEL=y
CONFIG_DRM_PANFROST=m
@@ -5759,7 +5758,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_RP2 is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SC16IS7XX_I2C=y
+# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_SPI=y
# CONFIG_SERIAL_SCCNXP is not set
diff --git a/kernel-i686-debug-fedora.config b/kernel-i686-debug-fedora.config
index 4920d82a0..947abfce0 100644
--- a/kernel-i686-debug-fedora.config
+++ b/kernel-i686-debug-fedora.config
@@ -1332,7 +1332,6 @@ CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set
-CONFIG_DRM_PANEL_ROCKTECH_JH057N00900=m
CONFIG_DRM_PANEL_RONBO_RB070D30=m
# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
@@ -1347,6 +1346,7 @@ CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
+CONFIG_DRM_PANEL_SITRONIX_ST7703=m
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
# CONFIG_DRM_PANEL_SONY_ACX424AKP is not set
# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
@@ -1354,7 +1354,6 @@ CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
# CONFIG_DRM_PANEL_TPO_TPG110 is not set
# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
-# CONFIG_DRM_PANEL_XINGBANGDA_XBD599 is not set
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
CONFIG_DRM_PANEL=y
# CONFIG_DRM_PARADE_PS8622 is not set
@@ -5251,7 +5250,7 @@ CONFIG_SERIAL_NONSTANDARD=y
CONFIG_SERIAL_OF_PLATFORM=m
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_RP2 is not set
-CONFIG_SERIAL_SC16IS7XX_I2C=y
+# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_SPI=y
# CONFIG_SERIAL_SCCNXP is not set
diff --git a/kernel-i686-fedora.config b/kernel-i686-fedora.config
index da40d37b6..14d2577e0 100644
--- a/kernel-i686-fedora.config
+++ b/kernel-i686-fedora.config
@@ -1323,7 +1323,6 @@ CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set
-CONFIG_DRM_PANEL_ROCKTECH_JH057N00900=m
CONFIG_DRM_PANEL_RONBO_RB070D30=m
# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
@@ -1338,6 +1337,7 @@ CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
+CONFIG_DRM_PANEL_SITRONIX_ST7703=m
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
# CONFIG_DRM_PANEL_SONY_ACX424AKP is not set
# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
@@ -1345,7 +1345,6 @@ CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
# CONFIG_DRM_PANEL_TPO_TPG110 is not set
# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
-# CONFIG_DRM_PANEL_XINGBANGDA_XBD599 is not set
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
CONFIG_DRM_PANEL=y
# CONFIG_DRM_PARADE_PS8622 is not set
@@ -5231,7 +5230,7 @@ CONFIG_SERIAL_NONSTANDARD=y
CONFIG_SERIAL_OF_PLATFORM=m
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_RP2 is not set
-CONFIG_SERIAL_SC16IS7XX_I2C=y
+# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_SPI=y
# CONFIG_SERIAL_SCCNXP is not set
diff --git a/kernel-ppc64le-debug-fedora.config b/kernel-ppc64le-debug-fedora.config
index 7a05d92fc..e142cc157 100644
--- a/kernel-ppc64le-debug-fedora.config
+++ b/kernel-ppc64le-debug-fedora.config
@@ -1223,7 +1223,6 @@ CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set
-CONFIG_DRM_PANEL_ROCKTECH_JH057N00900=m
CONFIG_DRM_PANEL_RONBO_RB070D30=m
# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
@@ -1238,6 +1237,7 @@ CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
+CONFIG_DRM_PANEL_SITRONIX_ST7703=m
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
# CONFIG_DRM_PANEL_SONY_ACX424AKP is not set
# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
@@ -1245,7 +1245,6 @@ CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
# CONFIG_DRM_PANEL_TPO_TPG110 is not set
# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
-# CONFIG_DRM_PANEL_XINGBANGDA_XBD599 is not set
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
CONFIG_DRM_PANEL=y
# CONFIG_DRM_PARADE_PS8622 is not set
@@ -4925,7 +4924,7 @@ CONFIG_SERIAL_NONSTANDARD=y
CONFIG_SERIAL_OF_PLATFORM=m
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_RP2 is not set
-CONFIG_SERIAL_SC16IS7XX_I2C=y
+# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_SPI=y
# CONFIG_SERIAL_SCCNXP is not set
diff --git a/kernel-ppc64le-fedora.config b/kernel-ppc64le-fedora.config
index a034bb8ff..ecf65b16c 100644
--- a/kernel-ppc64le-fedora.config
+++ b/kernel-ppc64le-fedora.config
@@ -1214,7 +1214,6 @@ CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set
-CONFIG_DRM_PANEL_ROCKTECH_JH057N00900=m
CONFIG_DRM_PANEL_RONBO_RB070D30=m
# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
@@ -1229,6 +1228,7 @@ CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
+CONFIG_DRM_PANEL_SITRONIX_ST7703=m
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
# CONFIG_DRM_PANEL_SONY_ACX424AKP is not set
# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
@@ -1236,7 +1236,6 @@ CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
# CONFIG_DRM_PANEL_TPO_TPG110 is not set
# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
-# CONFIG_DRM_PANEL_XINGBANGDA_XBD599 is not set
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
CONFIG_DRM_PANEL=y
# CONFIG_DRM_PARADE_PS8622 is not set
@@ -4903,7 +4902,7 @@ CONFIG_SERIAL_NONSTANDARD=y
CONFIG_SERIAL_OF_PLATFORM=m
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_RP2 is not set
-CONFIG_SERIAL_SC16IS7XX_I2C=y
+# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_SPI=y
# CONFIG_SERIAL_SCCNXP is not set
diff --git a/kernel-s390x-debug-fedora.config b/kernel-s390x-debug-fedora.config
index 0c25cef4b..8001ff78d 100644
--- a/kernel-s390x-debug-fedora.config
+++ b/kernel-s390x-debug-fedora.config
@@ -1229,7 +1229,6 @@ CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set
-CONFIG_DRM_PANEL_ROCKTECH_JH057N00900=m
CONFIG_DRM_PANEL_RONBO_RB070D30=m
# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
@@ -1244,6 +1243,7 @@ CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
+CONFIG_DRM_PANEL_SITRONIX_ST7703=m
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
# CONFIG_DRM_PANEL_SONY_ACX424AKP is not set
# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
@@ -1251,7 +1251,6 @@ CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
# CONFIG_DRM_PANEL_TPO_TPG110 is not set
# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
-# CONFIG_DRM_PANEL_XINGBANGDA_XBD599 is not set
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
CONFIG_DRM_PANEL=y
# CONFIG_DRM_PARADE_PS8622 is not set
@@ -4865,7 +4864,7 @@ CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_RP2 is not set
-CONFIG_SERIAL_SC16IS7XX_I2C=y
+# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_SPI=y
# CONFIG_SERIAL_SCCNXP is not set
diff --git a/kernel-s390x-fedora.config b/kernel-s390x-fedora.config
index d8f09b47d..5a4d45ade 100644
--- a/kernel-s390x-fedora.config
+++ b/kernel-s390x-fedora.config
@@ -1220,7 +1220,6 @@ CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set
-CONFIG_DRM_PANEL_ROCKTECH_JH057N00900=m
CONFIG_DRM_PANEL_RONBO_RB070D30=m
# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
@@ -1235,6 +1234,7 @@ CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
+CONFIG_DRM_PANEL_SITRONIX_ST7703=m
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
# CONFIG_DRM_PANEL_SONY_ACX424AKP is not set
# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
@@ -1242,7 +1242,6 @@ CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
# CONFIG_DRM_PANEL_TPO_TPG110 is not set
# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
-# CONFIG_DRM_PANEL_XINGBANGDA_XBD599 is not set
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
CONFIG_DRM_PANEL=y
# CONFIG_DRM_PARADE_PS8622 is not set
@@ -4843,7 +4842,7 @@ CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_RP2 is not set
-CONFIG_SERIAL_SC16IS7XX_I2C=y
+# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_SPI=y
# CONFIG_SERIAL_SCCNXP is not set
diff --git a/kernel-x86_64-debug-fedora.config b/kernel-x86_64-debug-fedora.config
index a18bea136..b5736de7c 100644
--- a/kernel-x86_64-debug-fedora.config
+++ b/kernel-x86_64-debug-fedora.config
@@ -1370,7 +1370,6 @@ CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set
-CONFIG_DRM_PANEL_ROCKTECH_JH057N00900=m
CONFIG_DRM_PANEL_RONBO_RB070D30=m
# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
@@ -1385,6 +1384,7 @@ CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
+CONFIG_DRM_PANEL_SITRONIX_ST7703=m
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
# CONFIG_DRM_PANEL_SONY_ACX424AKP is not set
# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
@@ -1392,7 +1392,6 @@ CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
# CONFIG_DRM_PANEL_TPO_TPG110 is not set
# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
-# CONFIG_DRM_PANEL_XINGBANGDA_XBD599 is not set
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
CONFIG_DRM_PANEL=y
# CONFIG_DRM_PARADE_PS8622 is not set
@@ -5295,7 +5294,7 @@ CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_RP2 is not set
-CONFIG_SERIAL_SC16IS7XX_I2C=y
+# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_SPI=y
# CONFIG_SERIAL_SCCNXP is not set
diff --git a/kernel-x86_64-fedora.config b/kernel-x86_64-fedora.config
index 206f4f9de..a9017635c 100644
--- a/kernel-x86_64-fedora.config
+++ b/kernel-x86_64-fedora.config
@@ -1361,7 +1361,6 @@ CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set
-CONFIG_DRM_PANEL_ROCKTECH_JH057N00900=m
CONFIG_DRM_PANEL_RONBO_RB070D30=m
# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
@@ -1376,6 +1375,7 @@ CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
+CONFIG_DRM_PANEL_SITRONIX_ST7703=m
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
# CONFIG_DRM_PANEL_SONY_ACX424AKP is not set
# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
@@ -1383,7 +1383,6 @@ CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
# CONFIG_DRM_PANEL_TPO_TPG110 is not set
# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
-# CONFIG_DRM_PANEL_XINGBANGDA_XBD599 is not set
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
CONFIG_DRM_PANEL=y
# CONFIG_DRM_PARADE_PS8622 is not set
@@ -5275,7 +5274,7 @@ CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_RP2 is not set
-CONFIG_SERIAL_SC16IS7XX_I2C=y
+# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_SPI=y
# CONFIG_SERIAL_SCCNXP is not set
diff --git a/kernel.spec b/kernel.spec
index 51797700e..dc7f8b531 100644
--- a/kernel.spec
+++ b/kernel.spec
@@ -830,7 +830,6 @@ Patch36: 0001-s390-Lock-down-the-kernel-when-the-IPL-secure-flag-i.patch
Patch37: 0001-Add-option-of-13-for-FORCE_MAX_ZONEORDER.patch
Patch58: 0001-arm-make-CONFIG_HIGHPTE-optional-without-CONFIG_EXPE.patch
Patch59: 0001-ARM-tegra-usb-no-reset.patch
-Patch61: 0001-dt-bindings-Add-doc-for-Pine64-Pinebook-Pro.patch
Patch62: 0001-Input-rmi4-remove-the-need-for-artificial-IRQ-in-cas.patch
Patch63: 0001-Drop-that-for-now.patch
Patch64: 0001-KEYS-Make-use-of-platform-keyring-for-module-signatu.patch
@@ -840,10 +839,6 @@ Patch67: 0001-soc-bcm2835-Sync-xHCI-reset-firmware-property-with-d.patch
Patch68: 0001-firmware-raspberrypi-Introduce-vl805-init-routine.patch
Patch69: 0001-PCI-brcmstb-Wait-for-Raspberry-Pi-s-firmware-when-pr.patch
Patch70: 0001-USB-pci-quirks-Add-Raspberry-Pi-4-quirk.patch
-Patch71: 0001-dt-bindings-panel-add-binding-for-Xingbangda-XBD599-.patch
-Patch72: 0001-drm-panel-add-Xingbangda-XBD599-panel.patch
-Patch73: 0001-drm-sun4i-sun6i_mipi_dsi-fix-horizontal-timing-calcu.patch
-Patch74: 0001-arm64-allwinner-dts-a64-add-LCD-related-device-nodes.patch
Patch75: 0001-e1000e-bump-up-timeout-to-wait-when-ME-un-configure-.patch
Patch76: 0001-perf-cs-etm-Move-defined-of-traceid_list.patch
Patch79: 0001-disp-gv100-expose-capabilities-class.patch
@@ -876,6 +871,24 @@ Patch105: 0001-virt-vbox-Log-unknown-ioctl-requests-as-error.patch
# Thinkpad dual fan control
Patch107: 0001-platform-x86-thinkpad_acpi-Add-support-for-dual-fan-.patch
+# Latest upstream screen driver - https://patchwork.kernel.org/patch/11627069/
+Patch110: 0001-dt-bindings-vendor-prefixes-Add-Xingbangda.patch
+Patch111: 0002-dt-bindings-panel-Convert-rocktech-jh057n00900-to-ya.patch
+Patch112: 0003-dt-bindings-panel-Add-compatible-for-Xingbangda-XBD5.patch
+Patch113: 0004-drm-panel-rocktech-jh057n00900-Rename-the-driver-to-.patch
+Patch114: 0005-drm-panel-st7703-Rename-functions-from-jh057n-prefix.patch
+Patch115: 0006-drm-panel-st7703-Prepare-for-supporting-multiple-pan.patch
+Patch116: 0007-drm-panel-st7703-Move-code-specific-to-jh057n-closer.patch
+Patch117: 0008-drm-panel-st7703-Move-generic-part-of-init-sequence-.patch
+Patch118: 0009-drm-panel-st7703-Add-support-for-Xingbangda-XBD599.patch
+Patch119: 0010-drm-panel-st7703-Enter-sleep-after-display-off.patch
+Patch120: 0011-drm-panel-st7703-Assert-reset-prior-to-powering-down.patch
+Patch121: 0012-arm64-dts-sun50i-a64-pinephone-Enable-LCD-support-on.patch
+Patch122: 0013-arm64-dts-sun50i-a64-pinephone-Add-touchscreen-suppo.patch
+# Back port from 5.8
+Patch123: 0001-usb-fusb302-Convert-to-use-GPIO-descriptors.patch
+# Tegra194 ACPI PCI quirk - http://patchwork.ozlabs.org/patch/1221384/
+Patch124: 0001-PCI-Add-MCFG-quirks-for-Tegra194-host-controllers.patch
# END OF PATCH DEFINITIONS
%endif