diff options
| -rw-r--r-- | imx6sx-Add-UDOO-Neo-support.patch | 619 |
1 files changed, 619 insertions, 0 deletions
diff --git a/imx6sx-Add-UDOO-Neo-support.patch b/imx6sx-Add-UDOO-Neo-support.patch new file mode 100644 index 000000000..6d9fd99d4 --- /dev/null +++ b/imx6sx-Add-UDOO-Neo-support.patch @@ -0,0 +1,619 @@ +From 76e691fc7653b85d390e58710e5c7db73ca49367 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Andreas=20F=C3=A4rber?= <afaerber@suse.de> +Date: Sun, 16 Oct 2016 16:44:23 +0200 +Subject: [PATCH 0732/2073] ARM: dts: imx6sx: Add UDOO Neo support +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add initial device trees for UDOO Neo Basic, Extended and Full boards: +* Serial console is enabled, other serial ports are prepared. +* I2C based PMIC is enabled. +* Ethernet is enabled for Basic and Full. +* SDHC is enabled, with the SDIO_PWR GPIO modeled as a regulator. +* Both user LEDs are enabled, with the orange one reserved for the M4 + and with the SD card as default trigger for the red LED. + +The decision on a board compatible string is deferred to later. + +Cc: Ettore Chimenti <ettore.chimenti@udoo.org> +Signed-off-by: Andreas Färber <afaerber@suse.de> +Signed-off-by: Shawn Guo <shawnguo@kernel.org> +--- + arch/arm/boot/dts/Makefile | 5 +- + arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts | 69 ++++++ + arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts | 54 +++++ + arch/arm/boot/dts/imx6sx-udoo-neo-full.dts | 69 ++++++ + arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 293 +++++++++++++++++++++++++ + 5 files changed, 489 insertions(+), 1 deletion(-) + create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts + create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts + create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-full.dts + create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo.dtsi + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index 019976b..da0197d 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -417,7 +417,10 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ + imx6sx-sabreauto.dtb \ + imx6sx-sdb-reva.dtb \ + imx6sx-sdb-sai.dtb \ +- imx6sx-sdb.dtb ++ imx6sx-sdb.dtb \ ++ imx6sx-udoo-neo-basic.dtb \ ++ imx6sx-udoo-neo-extended.dtb \ ++ imx6sx-udoo-neo-full.dtb + dtb-$(CONFIG_SOC_IMX6UL) += \ + imx6ul-14x14-evk.dtb \ + imx6ul-geam-kit.dtb \ +diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts +new file mode 100644 +index 0000000..0b88878 +--- /dev/null ++++ b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts +@@ -0,0 +1,69 @@ ++/* ++ * Copyright (c) 2016 Andreas Färber ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++ ++#include "imx6sx-udoo-neo.dtsi" ++ ++/ { ++ model = "UDOO Neo Basic"; ++ compatible = "fsl,imx6sx"; ++ ++ memory { ++ reg = <0x80000000 0x20000000>; ++ }; ++}; ++ ++&fec1 { ++ phy-handle = <ðphy1>; ++ status = "okay"; ++ ++ mdio { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ethphy1: ethernet-phy@0 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <0>; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts +new file mode 100644 +index 0000000..d6fdd17 +--- /dev/null ++++ b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts +@@ -0,0 +1,54 @@ ++/* ++ * Copyright (c) 2016 Andreas Färber ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++ ++#include "imx6sx-udoo-neo.dtsi" ++ ++/ { ++ model = "UDOO Neo Extended"; ++ compatible = "fsl,imx6sx"; ++ ++ memory { ++ reg = <0x80000000 0x40000000>; ++ }; ++}; +diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts +new file mode 100644 +index 0000000..d8c3577 +--- /dev/null ++++ b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts +@@ -0,0 +1,69 @@ ++/* ++ * Copyright (c) 2016 Andreas Färber ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++ ++#include "imx6sx-udoo-neo.dtsi" ++ ++/ { ++ model = "UDOO Neo Full"; ++ compatible = "fsl,imx6sx"; ++ ++ memory { ++ reg = <0x80000000 0x40000000>; ++ }; ++}; ++ ++&fec1 { ++ phy-handle = <ðphy1>; ++ status = "okay"; ++ ++ mdio { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ethphy1: ethernet-phy@0 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <0>; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi +new file mode 100644 +index 0000000..2b65d26 +--- /dev/null ++++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi +@@ -0,0 +1,293 @@ ++/* ++ * Copyright (c) 2016 Andreas Färber ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++#include "imx6sx.dtsi" ++ ++/ { ++ compatible = "fsl,imx6sx"; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ red { ++ label = "udoo-neo:red:mmc"; ++ gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; ++ default-state = "off"; ++ linux,default-trigger = "mmc0"; ++ }; ++ ++ orange { ++ label = "udoo-neo:orange:user"; ++ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; ++ default-state = "keep"; ++ }; ++ }; ++ ++ reg_sdio_pwr: regulator-sdio-pwr { ++ compatible = "regulator-fixed"; ++ gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ regulator-name = "SDIO_PWR"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-boot-on; ++ }; ++}; ++ ++&cpu0 { ++ arm-supply = <&sw1a_reg>; ++ soc-supply = <&sw1c_reg>; ++}; ++ ++&fec1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_enet1>; ++ phy-mode = "rmii"; ++ phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_i2c1>; ++ clock-frequency = <100000>; ++ status = "okay"; ++ ++ pmic: pmic@08 { ++ compatible = "fsl,pfuze3000"; ++ reg = <0x08>; ++ ++ regulators { ++ sw1a_reg: sw1a { ++ regulator-min-microvolt = <700000>; ++ regulator-max-microvolt = <1475000>; ++ regulator-boot-on; ++ regulator-always-on; ++ regulator-ramp-delay = <6250>; ++ }; ++ ++ sw1c_reg: sw1b { ++ regulator-min-microvolt = <700000>; ++ regulator-max-microvolt = <1475000>; ++ regulator-boot-on; ++ regulator-always-on; ++ regulator-ramp-delay = <6250>; ++ }; ++ ++ sw2_reg: sw2 { ++ regulator-min-microvolt = <1500000>; ++ regulator-max-microvolt = <1850000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ sw3a_reg: sw3 { ++ regulator-min-microvolt = <900000>; ++ regulator-max-microvolt = <1650000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ swbst_reg: swbst { ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5150000>; ++ }; ++ ++ snvs_reg: vsnvs { ++ regulator-min-microvolt = <1000000>; ++ regulator-max-microvolt = <3000000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ vref_reg: vrefddr { ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ vgen1_reg: vldo1 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ vgen2_reg: vldo2 { ++ regulator-min-microvolt = <800000>; ++ regulator-max-microvolt = <1550000>; ++ }; ++ ++ vgen3_reg: vccsd { ++ regulator-min-microvolt = <2850000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ vgen4_reg: v33 { ++ regulator-min-microvolt = <2850000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ vgen5_reg: vldo3 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ vgen6_reg: vldo4 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ }; ++ }; ++}; ++ ++&iomuxc { ++ pinctrl_enet1: enet1grp { ++ fsl,pins = ++ <MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0xa0b1>, ++ <MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1>, ++ <MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1>, ++ <MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1>, ++ <MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1>, ++ <MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1>, ++ ++ <MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x3081>, ++ <MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x3081>, ++ <MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081>, ++ <MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081>, ++ <MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081>, ++ <MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER 0x3081>, ++ ++ <MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91>; ++ }; ++ ++ pinctrl_i2c1: i2c1grp { ++ fsl,pins = ++ <MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1>, ++ <MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1>; ++ }; ++ ++ pinctrl_uart1: uart1grp { ++ fsl,pins = ++ <MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1>, ++ <MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1>; ++ }; ++ ++ pinctrl_uart2: uart2grp { ++ fsl,pins = ++ <MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1>, ++ <MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1>; ++ }; ++ ++ pinctrl_uart5: uart5grp { ++ fsl,pins = ++ <MX6SX_PAD_SD4_DATA4__UART5_RX 0x1b0b1>, ++ <MX6SX_PAD_SD4_DATA5__UART5_TX 0x1b0b1>; ++ }; ++ ++ pinctrl_uart6: uart6grp { ++ fsl,pins = ++ <MX6SX_PAD_CSI_DATA00__UART6_RI_B 0x1b0b1>, ++ <MX6SX_PAD_CSI_DATA01__UART6_DSR_B 0x1b0b1>, ++ <MX6SX_PAD_CSI_DATA02__UART6_DTR_B 0x1b0b1>, ++ <MX6SX_PAD_CSI_DATA03__UART6_DCD_B 0x1b0b1>, ++ <MX6SX_PAD_CSI_DATA04__UART6_RX 0x1b0b1>, ++ <MX6SX_PAD_CSI_DATA05__UART6_TX 0x1b0b1>, ++ <MX6SX_PAD_CSI_DATA06__UART6_RTS_B 0x1b0b1>, ++ <MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x1b0b1>; ++ }; ++ ++ pinctrl_usdhc2: usdhc2grp { ++ fsl,pins = ++ <MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059>, ++ <MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059>, ++ <MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059>, ++ <MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059>, ++ <MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059>, ++ <MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059>, ++ <MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x17059>; /* CD */ ++ }; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart1>; ++ status = "okay"; ++}; ++ ++/* Cortex-M4 serial */ ++&uart2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart2>; ++ status = "disabled"; ++}; ++ ++/* Arduino serial */ ++&uart5 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart5>; ++ status = "disabled"; ++}; ++ ++&uart6 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart6>; ++ uart-has-rtscts; ++ status = "disabled"; ++}; ++ ++&usdhc2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_usdhc2>; ++ vmmc-supply = <®_sdio_pwr>; ++ bus-width = <4>; ++ cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; ++ no-1-8-v; ++ keep-power-in-suspend; ++ wakeup-source; ++ status = "okay"; ++}; +-- +2.9.3 + +From 841310d00a76800a8407ee214eb7242541aac178 Mon Sep 17 00:00:00 2001 +From: Fabio Estevam <fabio.estevam@nxp.com> +Date: Tue, 1 Nov 2016 15:38:12 -0200 +Subject: [PATCH 1789/2073] ARM: dts: imx6sx-udoo: Add board specific + compatible strings + +Add a compatible entry for the specific board versions. + +Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> +Signed-off-by: Shawn Guo <shawnguo@kernel.org> +--- + arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts | 2 +- + arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts | 2 +- + arch/arm/boot/dts/imx6sx-udoo-neo-full.dts | 2 +- + 3 files changed, 3 insertions(+), 3 deletions(-) + +diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts +index 0b88878..0c1fc1a 100644 +--- a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts ++++ b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts +@@ -46,7 +46,7 @@ + + / { + model = "UDOO Neo Basic"; +- compatible = "fsl,imx6sx"; ++ compatible = "udoo,neobasic", "fsl,imx6sx"; + + memory { + reg = <0x80000000 0x20000000>; +diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts +index d6fdd17..5d6c227 100644 +--- a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts ++++ b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts +@@ -46,7 +46,7 @@ + + / { + model = "UDOO Neo Extended"; +- compatible = "fsl,imx6sx"; ++ compatible = "udoo,neoextended", "fsl,imx6sx"; + + memory { + reg = <0x80000000 0x40000000>; +diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts +index d8c3577..653ceb2 100644 +--- a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts ++++ b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts +@@ -46,7 +46,7 @@ + + / { + model = "UDOO Neo Full"; +- compatible = "fsl,imx6sx"; ++ compatible = "udoo,neofull", "fsl,imx6sx"; + + memory { + reg = <0x80000000 0x40000000>; +-- +2.9.3 + |