summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--0001-Input-wacom-make-sure-touch_max-is-set-for-touch-dev.patch56
-rw-r--r--0001-usb-phy-Quiet-unable-to-find-transceiver-message.patch34
-rw-r--r--0002-Input-wacom-add-support-for-three-new-Intuos-devices.patch216
-rw-r--r--0003-Input-wacom-add-reporting-of-SW_MUTE_DEVICE-events.patch155
-rw-r--r--Input-ALPS-add-support-for-Dolphin-devices.patch348
-rw-r--r--config-generic4
-rw-r--r--config-x86-generic1
-rw-r--r--elantech-Properly-differentiate-between-clickpads-an.patch110
-rw-r--r--kernel.spec34
-rw-r--r--sources2
10 files changed, 51 insertions, 909 deletions
diff --git a/0001-Input-wacom-make-sure-touch_max-is-set-for-touch-dev.patch b/0001-Input-wacom-make-sure-touch_max-is-set-for-touch-dev.patch
deleted file mode 100644
index f86cc1ff3..000000000
--- a/0001-Input-wacom-make-sure-touch_max-is-set-for-touch-dev.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-Bugzilla: 1046238
-Upstream-status: Queued for 3.14
-
-From 1d0d6df02750b4a6f466768cbfbf860e24f4c8d4 Mon Sep 17 00:00:00 2001
-From: Ping Cheng <pinglinux@gmail.com>
-Date: Mon, 25 Nov 2013 18:43:45 -0800
-Subject: [PATCH] Input: wacom - make sure touch_max is set for touch devices
-
-Old single touch Tablet PCs do not have touch_max set at
-wacom_features. Since touch device at lease supports one
-finger, assign touch_max to 1 when touch usage is defined
-in its HID Descriptor and touch_max is not pre-defined.
-
-Tested-by: Jason Gerecke <killertofu@gmail.com>
-Signed-off-by: Ping Cheng <pingc@wacom.com>
-Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
-Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
----
- drivers/input/tablet/wacom_sys.c | 7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
-index 8a90da1..3d71b60 100644
---- a/drivers/input/tablet/wacom_sys.c
-+++ b/drivers/input/tablet/wacom_sys.c
-@@ -304,7 +304,7 @@ static int wacom_parse_hid(struct usb_interface *intf,
- struct usb_device *dev = interface_to_usbdev(intf);
- char limit = 0;
- /* result has to be defined as int for some devices */
-- int result = 0;
-+ int result = 0, touch_max = 0;
- int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0;
- unsigned char *report;
-
-@@ -351,7 +351,8 @@ static int wacom_parse_hid(struct usb_interface *intf,
- if (usage == WCM_DESKTOP) {
- if (finger) {
- features->device_type = BTN_TOOL_FINGER;
--
-+ /* touch device at least supports one touch point */
-+ touch_max = 1;
- switch (features->type) {
- case TABLETPC2FG:
- features->pktlen = WACOM_PKGLEN_TPC2FG;
-@@ -504,6 +505,8 @@ static int wacom_parse_hid(struct usb_interface *intf,
- }
-
- out:
-+ if (!features->touch_max && touch_max)
-+ features->touch_max = touch_max;
- result = 0;
- kfree(report);
- return result;
---
-1.8.4.2
-
diff --git a/0001-usb-phy-Quiet-unable-to-find-transceiver-message.patch b/0001-usb-phy-Quiet-unable-to-find-transceiver-message.patch
new file mode 100644
index 000000000..431ad19f5
--- /dev/null
+++ b/0001-usb-phy-Quiet-unable-to-find-transceiver-message.patch
@@ -0,0 +1,34 @@
+From 80f13c7cb8c2b83b6b38a953ad69b91cab9dc614 Mon Sep 17 00:00:00 2001
+From: Josh Boyer <jwboyer@fedoraproject.org>
+Date: Sat, 25 Jan 2014 10:00:41 -0500
+Subject: [PATCH] usb: phy: Quiet unable to find transceiver message
+
+commit 1ae5799ef6317 ("usb: hcd: Initialize USB phy if needed") allows
+the USB layer to initialize external PHYs if needed. However, a PHY is
+not needed in all cases. The usb_get_phy_device function will print
+an error message, "unable to find transceiver" but everything still
+functions normally.
+
+Drop the severity of this message to pr_debug.
+
+Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
+---
+ drivers/usb/phy/phy.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
+index e6f61e4..c7fe880 100644
+--- a/drivers/usb/phy/phy.c
++++ b/drivers/usb/phy/phy.c
+@@ -228,7 +228,7 @@ struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index)
+
+ phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
+ if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
+- pr_err("unable to find transceiver\n");
++ pr_debug("unable to find transceiver\n");
+ goto err0;
+ }
+
+--
+1.8.5.3
+
diff --git a/0002-Input-wacom-add-support-for-three-new-Intuos-devices.patch b/0002-Input-wacom-add-support-for-three-new-Intuos-devices.patch
deleted file mode 100644
index 0c2161f11..000000000
--- a/0002-Input-wacom-add-support-for-three-new-Intuos-devices.patch
+++ /dev/null
@@ -1,216 +0,0 @@
-Bugzilla: 1046238
-Upstream-status: Queued for 3.14
-
-From b5fd2a3e92ca5c8c1f3c20d31ac5daed3ec4d604 Mon Sep 17 00:00:00 2001
-From: Ping Cheng <pinglinux@gmail.com>
-Date: Mon, 25 Nov 2013 18:44:55 -0800
-Subject: [PATCH] Input: wacom - add support for three new Intuos devices
-
-Two tablets in this series support both pen and touch. One (Intuos S)
-only supports pen. This patch also updates the driver to process wireless
-devices that do not support touch interface.
-
-Tested-by: Jason Gerecke <killertofu@gmail.com>
-Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
-Signed-off-by: Ping Cheng <pingc@wacom.com>
-Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
----
- drivers/input/tablet/wacom_sys.c | 6 ++--
- drivers/input/tablet/wacom_wac.c | 61 ++++++++++++++++++++++++++++++----------
- drivers/input/tablet/wacom_wac.h | 2 ++
- 3 files changed, 51 insertions(+), 18 deletions(-)
-
-diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
-index 3d71b60..3a7d99c 100644
---- a/drivers/input/tablet/wacom_sys.c
-+++ b/drivers/input/tablet/wacom_sys.c
-@@ -1198,7 +1198,8 @@ static void wacom_wireless_work(struct work_struct *work)
- goto fail;
-
- /* Touch interface */
-- if (wacom_wac1->features.touch_max) {
-+ if (wacom_wac1->features.touch_max ||
-+ wacom_wac1->features.type == INTUOSHT) {
- wacom_wac2->features =
- *((struct wacom_features *)id->driver_info);
- wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
-@@ -1321,7 +1322,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
- * HID descriptor. If this is the touch interface (wMaxPacketSize
- * of WACOM_PKGLEN_BBTOUCH3), override the table values.
- */
-- if (features->type >= INTUOS5S && features->type <= INTUOSPL) {
-+ if (features->type >= INTUOS5S && features->type <= INTUOSHT) {
- if (endpoint->wMaxPacketSize == WACOM_PKGLEN_BBTOUCH3) {
- features->device_type = BTN_TOOL_FINGER;
- features->pktlen = WACOM_PKGLEN_BBTOUCH3;
-@@ -1391,7 +1392,6 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
- goto fail5;
- }
- }
--
- return 0;
-
- fail5: wacom_destroy_leds(wacom);
-diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
-index 3f75f1d..eb60a28 100644
---- a/drivers/input/tablet/wacom_wac.c
-+++ b/drivers/input/tablet/wacom_wac.c
-@@ -1176,10 +1176,16 @@ static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
- static void wacom_bpt3_button_msg(struct wacom_wac *wacom, unsigned char *data)
- {
- struct input_dev *input = wacom->input;
-+ struct wacom_features *features = &wacom->features;
-
-- input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
-+ if (features->type == INTUOSHT) {
-+ input_report_key(input, BTN_LEFT, (data[1] & 0x02) != 0);
-+ input_report_key(input, BTN_BACK, (data[1] & 0x08) != 0);
-+ } else {
-+ input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
-+ input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
-+ }
- input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0);
-- input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
- input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0);
- }
-
-@@ -1217,7 +1223,7 @@ static int wacom_bpt_pen(struct wacom_wac *wacom)
- unsigned char *data = wacom->data;
- int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0;
-
-- if (data[0] != 0x02)
-+ if (data[0] != WACOM_REPORT_PENABLED)
- return 0;
-
- prox = (data[1] & 0x20) == 0x20;
-@@ -1297,7 +1303,7 @@ static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len)
- unsigned char *data = wacom->data;
- int connected;
-
-- if (len != WACOM_PKGLEN_WIRELESS || data[0] != 0x80)
-+ if (len != WACOM_PKGLEN_WIRELESS || data[0] != WACOM_REPORT_WL)
- return 0;
-
- connected = data[1] & 0x01;
-@@ -1391,6 +1397,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
- break;
-
- case BAMBOO_PT:
-+ case INTUOSHT:
- sync = wacom_bpt_irq(wacom_wac, len);
- break;
-
-@@ -1459,7 +1466,7 @@ void wacom_setup_device_quirks(struct wacom_features *features)
-
- /* these device have multiple inputs */
- if (features->type >= WIRELESS ||
-- (features->type >= INTUOS5S && features->type <= INTUOSPL) ||
-+ (features->type >= INTUOS5S && features->type <= INTUOSHT) ||
- (features->oVid && features->oPid))
- features->quirks |= WACOM_QUIRK_MULTI_INPUT;
-
-@@ -1771,33 +1778,43 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
- __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
- break;
-
-+ case INTUOSHT:
- case BAMBOO_PT:
- __clear_bit(ABS_MISC, input_dev->absbit);
-
-- __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
--
- if (features->device_type == BTN_TOOL_FINGER) {
-- unsigned int flags = INPUT_MT_POINTER;
-
- __set_bit(BTN_LEFT, input_dev->keybit);
- __set_bit(BTN_FORWARD, input_dev->keybit);
- __set_bit(BTN_BACK, input_dev->keybit);
- __set_bit(BTN_RIGHT, input_dev->keybit);
-
-- if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
-- input_set_abs_params(input_dev,
-+ if (features->touch_max) {
-+ /* touch interface */
-+ unsigned int flags = INPUT_MT_POINTER;
-+
-+ __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
-+ if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
-+ input_set_abs_params(input_dev,
- ABS_MT_TOUCH_MAJOR,
- 0, features->x_max, 0, 0);
-- input_set_abs_params(input_dev,
-+ input_set_abs_params(input_dev,
- ABS_MT_TOUCH_MINOR,
- 0, features->y_max, 0, 0);
-+ } else {
-+ __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
-+ __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
-+ flags = 0;
-+ }
-+ input_mt_init_slots(input_dev, features->touch_max, flags);
- } else {
-- __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
-- __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
-- flags = 0;
-+ /* buttons/keys only interface */
-+ __clear_bit(ABS_X, input_dev->absbit);
-+ __clear_bit(ABS_Y, input_dev->absbit);
-+ __clear_bit(BTN_TOUCH, input_dev->keybit);
- }
-- input_mt_init_slots(input_dev, features->touch_max, flags);
- } else if (features->device_type == BTN_TOOL_PEN) {
-+ __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
- __set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
- __set_bit(BTN_TOOL_PEN, input_dev->keybit);
- __set_bit(BTN_STYLUS, input_dev->keybit);
-@@ -2194,6 +2211,17 @@ static const struct wacom_features wacom_features_0x300 =
- static const struct wacom_features wacom_features_0x301 =
- { "Wacom Bamboo One M", WACOM_PKGLEN_BBPEN, 21648, 13530, 1023,
- 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-+static const struct wacom_features wacom_features_0x302 =
-+ { "Wacom Intuos PT S", WACOM_PKGLEN_BBPEN, 15200, 9500, 1023,
-+ 31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
-+ .touch_max = 16 };
-+static const struct wacom_features wacom_features_0x303 =
-+ { "Wacom Intuos PT M", WACOM_PKGLEN_BBPEN, 21600, 13500, 1023,
-+ 31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
-+ .touch_max = 16 };
-+static const struct wacom_features wacom_features_0x30E =
-+ { "Wacom Intuos S", WACOM_PKGLEN_BBPEN, 15200, 9500, 1023,
-+ 31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
- static const struct wacom_features wacom_features_0x6004 =
- { "ISD-V4", WACOM_PKGLEN_GRAPHIRE, 12800, 8000, 255,
- 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-@@ -2329,6 +2357,9 @@ const struct usb_device_id wacom_ids[] = {
- { USB_DEVICE_WACOM(0x10D) },
- { USB_DEVICE_WACOM(0x300) },
- { USB_DEVICE_WACOM(0x301) },
-+ { USB_DEVICE_DETAILED(0x302, USB_CLASS_HID, 0, 0) },
-+ { USB_DEVICE_DETAILED(0x303, USB_CLASS_HID, 0, 0) },
-+ { USB_DEVICE_DETAILED(0x30E, USB_CLASS_HID, 0, 0) },
- { USB_DEVICE_WACOM(0x304) },
- { USB_DEVICE_DETAILED(0x314, USB_CLASS_HID, 0, 0) },
- { USB_DEVICE_DETAILED(0x315, USB_CLASS_HID, 0, 0) },
-diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
-index fd23a37..854cceb 100644
---- a/drivers/input/tablet/wacom_wac.h
-+++ b/drivers/input/tablet/wacom_wac.h
-@@ -54,6 +54,7 @@
- #define WACOM_REPORT_TPCST 16
- #define WACOM_REPORT_TPC1FGE 18
- #define WACOM_REPORT_24HDT 1
-+#define WACOM_REPORT_WL 128
-
- /* device quirks */
- #define WACOM_QUIRK_MULTI_INPUT 0x0001
-@@ -81,6 +82,7 @@ enum {
- INTUOSPS,
- INTUOSPM,
- INTUOSPL,
-+ INTUOSHT,
- WACOM_21UX2,
- WACOM_22HD,
- DTK,
---
-1.8.4.2
-
diff --git a/0003-Input-wacom-add-reporting-of-SW_MUTE_DEVICE-events.patch b/0003-Input-wacom-add-reporting-of-SW_MUTE_DEVICE-events.patch
deleted file mode 100644
index ad433639d..000000000
--- a/0003-Input-wacom-add-reporting-of-SW_MUTE_DEVICE-events.patch
+++ /dev/null
@@ -1,155 +0,0 @@
-Bugzilla: 1046238
-Upstream-status: Queued for 3.14
-
-From 961794a00eab03f4344b7d5e825e8e789e55da87 Mon Sep 17 00:00:00 2001
-From: Ping Cheng <pinglinux@gmail.com>
-Date: Thu, 5 Dec 2013 12:54:53 -0800
-Subject: [PATCH] Input: wacom - add reporting of SW_MUTE_DEVICE events
-
-New Intuos series models added a hardware switch to turn touch
-data on/off. The state of the switch is reported periodically
-from the tablet. To report the state the driver will emit SW_MUTE_DEVICE
-events.
-
-Reviewed_by: Chris Bagwell <chris@cnpbagwell.com>
-Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
-Tested-by: Jason Gerecke <killertofu@gmail.com>
-Signed-off-by: Ping Cheng <pingc@wacom.com>
-Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
----
- drivers/input/tablet/wacom_sys.c | 12 ++++++++++++
- drivers/input/tablet/wacom_wac.c | 30 +++++++++++++++++++++++++++---
- drivers/input/tablet/wacom_wac.h | 5 +++++
- 3 files changed, 44 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
-index 8318826..b16ebef 100644
---- a/drivers/input/tablet/wacom_sys.c
-+++ b/drivers/input/tablet/wacom_sys.c
-@@ -1197,6 +1197,8 @@ static void wacom_wireless_work(struct work_struct *work)
- wacom_wac1->features.device_type = BTN_TOOL_PEN;
- snprintf(wacom_wac1->name, WACOM_NAME_MAX, "%s (WL) Pen",
- wacom_wac1->features.name);
-+ wacom_wac1->shared->touch_max = wacom_wac1->features.touch_max;
-+ wacom_wac1->shared->type = wacom_wac1->features.type;
- error = wacom_register_input(wacom1);
- if (error)
- goto fail;
-@@ -1218,6 +1220,10 @@ static void wacom_wireless_work(struct work_struct *work)
- error = wacom_register_input(wacom2);
- if (error)
- goto fail;
-+
-+ if (wacom_wac1->features.type == INTUOSHT &&
-+ wacom_wac1->features.touch_max)
-+ wacom_wac->shared->touch_input = wacom_wac2->input;
- }
-
- error = wacom_initialize_battery(wacom);
-@@ -1396,6 +1402,12 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
- goto fail5;
- }
- }
-+
-+ if (wacom_wac->features.type == INTUOSHT && wacom_wac->features.touch_max) {
-+ if (wacom_wac->features.device_type == BTN_TOOL_FINGER)
-+ wacom_wac->shared->touch_input = wacom_wac->input;
-+ }
-+
- return 0;
-
- fail5: wacom_destroy_leds(wacom);
-diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
-index 7655088..048e5b3 100644
---- a/drivers/input/tablet/wacom_wac.c
-+++ b/drivers/input/tablet/wacom_wac.c
-@@ -1219,13 +1219,23 @@ static int wacom_bpt3_touch(struct wacom_wac *wacom)
-
- static int wacom_bpt_pen(struct wacom_wac *wacom)
- {
-+ struct wacom_features *features = &wacom->features;
- struct input_dev *input = wacom->input;
- unsigned char *data = wacom->data;
- int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0;
-
-- if (data[0] != WACOM_REPORT_PENABLED)
-+ if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_USB)
- return 0;
-
-+ if (data[0] == WACOM_REPORT_USB) {
-+ if (features->type == INTUOSHT && features->touch_max) {
-+ input_report_switch(wacom->shared->touch_input,
-+ SW_MUTE_DEVICE, data[8] & 0x40);
-+ input_sync(wacom->shared->touch_input);
-+ }
-+ return 0;
-+ }
-+
- prox = (data[1] & 0x20) == 0x20;
-
- /*
-@@ -1258,8 +1268,8 @@ static int wacom_bpt_pen(struct wacom_wac *wacom)
- * touching and applying pressure; do not report negative
- * distance.
- */
-- if (data[8] <= wacom->features.distance_max)
-- d = wacom->features.distance_max - data[8];
-+ if (data[8] <= features->distance_max)
-+ d = features->distance_max - data[8];
-
- pen = data[1] & 0x01;
- btn1 = data[1] & 0x02;
-@@ -1310,6 +1320,13 @@ static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len)
- if (connected) {
- int pid, battery;
-
-+ if ((wacom->shared->type == INTUOSHT) &&
-+ wacom->shared->touch_max) {
-+ input_report_switch(wacom->shared->touch_input,
-+ SW_MUTE_DEVICE, data[5] & 0x40);
-+ input_sync(wacom->shared->touch_input);
-+ }
-+
- pid = get_unaligned_be16(&data[6]);
- battery = data[5] & 0x3f;
- if (wacom->pid != pid) {
-@@ -1779,6 +1796,13 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
- break;
-
- case INTUOSHT:
-+ if (features->touch_max &&
-+ features->device_type == BTN_TOOL_FINGER) {
-+ input_dev->evbit[0] |= BIT_MASK(EV_SW);
-+ __set_bit(SW_MUTE_DEVICE, input_dev->swbit);
-+ }
-+ /* fall through */
-+
- case BAMBOO_PT:
- __clear_bit(ABS_MISC, input_dev->absbit);
-
-diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
-index 854cceb..3600cf7 100644
---- a/drivers/input/tablet/wacom_wac.h
-+++ b/drivers/input/tablet/wacom_wac.h
-@@ -55,6 +55,7 @@
- #define WACOM_REPORT_TPC1FGE 18
- #define WACOM_REPORT_24HDT 1
- #define WACOM_REPORT_WL 128
-+#define WACOM_REPORT_USB 192
-
- /* device quirks */
- #define WACOM_QUIRK_MULTI_INPUT 0x0001
-@@ -131,6 +132,10 @@ struct wacom_features {
- struct wacom_shared {
- bool stylus_in_proximity;
- bool touch_down;
-+ /* for wireless device to access USB interfaces */
-+ unsigned touch_max;
-+ int type;
-+ struct input_dev *touch_input;
- };
-
- struct wacom_wac {
---
-1.8.4.2
-
diff --git a/Input-ALPS-add-support-for-Dolphin-devices.patch b/Input-ALPS-add-support-for-Dolphin-devices.patch
deleted file mode 100644
index 1bdc0cbf8..000000000
--- a/Input-ALPS-add-support-for-Dolphin-devices.patch
+++ /dev/null
@@ -1,348 +0,0 @@
-Bugzilla: 953211
-Upstream-status: Queued for 3.14
-
-From 4081924b7b6ce876fdb8e8049f1a5ba9c1496483 Mon Sep 17 00:00:00 2001
-From: Yunkang Tang <tommywill2011@gmail.com>
-Date: Thu, 26 Dec 2013 14:54:19 -0800
-Subject: [PATCH] Input: ALPS - add support for "Dolphin" devices
-
-This adds support for another flavor of ALPS protocol used in newer
-"Dolphin" devices.
-
-Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com>
-Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
----
- drivers/input/mouse/alps.c | 214 ++++++++++++++++++++++++++++++++++++---------
- drivers/input/mouse/alps.h | 7 +-
- 2 files changed, 179 insertions(+), 42 deletions(-)
-
-diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
-index 5cf62e3..fb15c64 100644
---- a/drivers/input/mouse/alps.c
-+++ b/drivers/input/mouse/alps.c
-@@ -277,6 +277,57 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse)
- }
-
- /*
-+ * Process bitmap data for V5 protocols. Return value is null.
-+ *
-+ * The bitmaps don't have enough data to track fingers, so this function
-+ * only generates points representing a bounding box of at most two contacts.
-+ * These two points are returned in x1, y1, x2, and y2.
-+ */
-+static void alps_process_bitmap_dolphin(struct alps_data *priv,
-+ struct alps_fields *fields,
-+ int *x1, int *y1, int *x2, int *y2)
-+{
-+ int box_middle_x, box_middle_y;
-+ unsigned int x_map, y_map;
-+ unsigned char start_bit, end_bit;
-+ unsigned char x_msb, x_lsb, y_msb, y_lsb;
-+
-+ x_map = fields->x_map;
-+ y_map = fields->y_map;
-+
-+ if (!x_map || !y_map)
-+ return;
-+
-+ /* Get Most-significant and Least-significant bit */
-+ x_msb = fls(x_map);
-+ x_lsb = ffs(x_map);
-+ y_msb = fls(y_map);
-+ y_lsb = ffs(y_map);
-+
-+ /* Most-significant bit should never exceed max sensor line number */
-+ if (x_msb > priv->x_bits || y_msb > priv->y_bits)
-+ return;
-+
-+ *x1 = *y1 = *x2 = *y2 = 0;
-+
-+ if (fields->fingers > 1) {
-+ start_bit = priv->x_bits - x_msb;
-+ end_bit = priv->x_bits - x_lsb;
-+ box_middle_x = (priv->x_max * (start_bit + end_bit)) /
-+ (2 * (priv->x_bits - 1));
-+
-+ start_bit = y_lsb - 1;
-+ end_bit = y_msb - 1;
-+ box_middle_y = (priv->y_max * (start_bit + end_bit)) /
-+ (2 * (priv->y_bits - 1));
-+ *x1 = fields->x;
-+ *y1 = fields->y;
-+ *x2 = 2 * box_middle_x - *x1;
-+ *y2 = 2 * box_middle_y - *y1;
-+ }
-+}
-+
-+/*
- * Process bitmap data from v3 and v4 protocols. Returns the number of
- * fingers detected. A return value of 0 means at least one of the
- * bitmaps was empty.
-@@ -481,7 +532,8 @@ static void alps_decode_buttons_v3(struct alps_fields *f, unsigned char *p)
- f->ts_middle = !!(p[3] & 0x40);
- }
-
--static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p)
-+static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p,
-+ struct psmouse *psmouse)
- {
- f->first_mp = !!(p[4] & 0x40);
- f->is_mp = !!(p[0] & 0x40);
-@@ -502,48 +554,61 @@ static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p)
- alps_decode_buttons_v3(f, p);
- }
-
--static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p)
-+static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p,
-+ struct psmouse *psmouse)
- {
-- alps_decode_pinnacle(f, p);
-+ alps_decode_pinnacle(f, p, psmouse);
-
- f->x_map |= (p[5] & 0x10) << 11;
- f->y_map |= (p[5] & 0x20) << 6;
- }
-
--static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p)
-+static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p,
-+ struct psmouse *psmouse)
- {
-+ u64 palm_data = 0;
-+ struct alps_data *priv = psmouse->private;
-+
- f->first_mp = !!(p[0] & 0x02);
- f->is_mp = !!(p[0] & 0x20);
-
-- f->fingers = ((p[0] & 0x6) >> 1 |
-+ if (!f->is_mp) {
-+ f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
-+ f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
-+ f->z = (p[0] & 4) ? 0 : p[5] & 0x7f;
-+ alps_decode_buttons_v3(f, p);
-+ } else {
-+ f->fingers = ((p[0] & 0x6) >> 1 |
- (p[0] & 0x10) >> 2);
-- f->x_map = ((p[2] & 0x60) >> 5) |
-- ((p[4] & 0x7f) << 2) |
-- ((p[5] & 0x7f) << 9) |
-- ((p[3] & 0x07) << 16) |
-- ((p[3] & 0x70) << 15) |
-- ((p[0] & 0x01) << 22);
-- f->y_map = (p[1] & 0x7f) |
-- ((p[2] & 0x1f) << 7);
--
-- f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
-- f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
-- f->z = (p[0] & 4) ? 0 : p[5] & 0x7f;
-
-- alps_decode_buttons_v3(f, p);
-+ palm_data = (p[1] & 0x7f) |
-+ ((p[2] & 0x7f) << 7) |
-+ ((p[4] & 0x7f) << 14) |
-+ ((p[5] & 0x7f) << 21) |
-+ ((p[3] & 0x07) << 28) |
-+ (((u64)p[3] & 0x70) << 27) |
-+ (((u64)p[0] & 0x01) << 34);
-+
-+ /* Y-profile is stored in P(0) to p(n-1), n = y_bits; */
-+ f->y_map = palm_data & (BIT(priv->y_bits) - 1);
-+
-+ /* X-profile is stored in p(n) to p(n+m-1), m = x_bits; */
-+ f->x_map = (palm_data >> priv->y_bits) &
-+ (BIT(priv->x_bits) - 1);
-+ }
- }
-
--static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
-+static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
- {
- struct alps_data *priv = psmouse->private;
- unsigned char *packet = psmouse->packet;
- struct input_dev *dev = psmouse->dev;
- struct input_dev *dev2 = priv->dev2;
- int x1 = 0, y1 = 0, x2 = 0, y2 = 0;
-- int fingers = 0, bmap_fingers;
-- struct alps_fields f;
-+ int fingers = 0, bmap_fn;
-+ struct alps_fields f = {0};
-
-- priv->decode_fields(&f, packet);
-+ priv->decode_fields(&f, packet, psmouse);
-
- /*
- * There's no single feature of touchpad position and bitmap packets
-@@ -560,19 +625,38 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
- */
- if (f.is_mp) {
- fingers = f.fingers;
-- bmap_fingers = alps_process_bitmap(priv,
-- f.x_map, f.y_map,
-- &x1, &y1, &x2, &y2);
--
-- /*
-- * We shouldn't report more than one finger if
-- * we don't have two coordinates.
-- */
-- if (fingers > 1 && bmap_fingers < 2)
-- fingers = bmap_fingers;
--
-- /* Now process position packet */
-- priv->decode_fields(&f, priv->multi_data);
-+ if (priv->proto_version == ALPS_PROTO_V3) {
-+ bmap_fn = alps_process_bitmap(priv, f.x_map,
-+ f.y_map, &x1, &y1,
-+ &x2, &y2);
-+
-+ /*
-+ * We shouldn't report more than one finger if
-+ * we don't have two coordinates.
-+ */
-+ if (fingers > 1 && bmap_fn < 2)
-+ fingers = bmap_fn;
-+
-+ /* Now process position packet */
-+ priv->decode_fields(&f, priv->multi_data,
-+ psmouse);
-+ } else {
-+ /*
-+ * Because Dolphin uses position packet's
-+ * coordinate data as Pt1 and uses it to
-+ * calculate Pt2, so we need to do position
-+ * packet decode first.
-+ */
-+ priv->decode_fields(&f, priv->multi_data,
-+ psmouse);
-+
-+ /*
-+ * Since Dolphin's finger number is reliable,
-+ * there is no need to compare with bmap_fn.
-+ */
-+ alps_process_bitmap_dolphin(priv, &f, &x1, &y1,
-+ &x2, &y2);
-+ }
- } else {
- priv->multi_packet = 0;
- }
-@@ -662,7 +746,7 @@ static void alps_process_packet_v3(struct psmouse *psmouse)
- return;
- }
-
-- alps_process_touchpad_packet_v3(psmouse);
-+ alps_process_touchpad_packet_v3_v5(psmouse);
- }
-
- static void alps_process_packet_v6(struct psmouse *psmouse)
-@@ -1709,6 +1793,52 @@ error:
- return -1;
- }
-
-+static int alps_dolphin_get_device_area(struct psmouse *psmouse,
-+ struct alps_data *priv)
-+{
-+ struct ps2dev *ps2dev = &psmouse->ps2dev;
-+ unsigned char param[4] = {0};
-+ int num_x_electrode, num_y_electrode;
-+
-+ if (alps_enter_command_mode(psmouse))
-+ return -1;
-+
-+ param[0] = 0x0a;
-+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
-+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) ||
-+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) ||
-+ ps2_command(ps2dev, &param[0], PSMOUSE_CMD_SETRATE) ||
-+ ps2_command(ps2dev, &param[0], PSMOUSE_CMD_SETRATE))
-+ return -1;
-+
-+ if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
-+ return -1;
-+
-+ /*
-+ * Dolphin's sensor line number is not fixed. It can be calculated
-+ * by adding the device's register value with DOLPHIN_PROFILE_X/YOFFSET.
-+ * Further more, we can get device's x_max and y_max by multiplying
-+ * sensor line number with DOLPHIN_COUNT_PER_ELECTRODE.
-+ *
-+ * e.g. When we get register's sensor_x = 11 & sensor_y = 8,
-+ * real sensor line number X = 11 + 8 = 19, and
-+ * real sensor line number Y = 8 + 1 = 9.
-+ * So, x_max = (19 - 1) * 64 = 1152, and
-+ * y_max = (9 - 1) * 64 = 512.
-+ */
-+ num_x_electrode = DOLPHIN_PROFILE_XOFFSET + (param[2] & 0x0F);
-+ num_y_electrode = DOLPHIN_PROFILE_YOFFSET + ((param[2] >> 4) & 0x0F);
-+ priv->x_bits = num_x_electrode;
-+ priv->y_bits = num_y_electrode;
-+ priv->x_max = (num_x_electrode - 1) * DOLPHIN_COUNT_PER_ELECTRODE;
-+ priv->y_max = (num_y_electrode - 1) * DOLPHIN_COUNT_PER_ELECTRODE;
-+
-+ if (alps_exit_command_mode(psmouse))
-+ return -1;
-+
-+ return 0;
-+}
-+
- static int alps_hw_init_dolphin_v1(struct psmouse *psmouse)
- {
- struct ps2dev *ps2dev = &psmouse->ps2dev;
-@@ -1763,13 +1893,13 @@ static void alps_set_defaults(struct alps_data *priv)
- break;
- case ALPS_PROTO_V5:
- priv->hw_init = alps_hw_init_dolphin_v1;
-- priv->process_packet = alps_process_packet_v3;
-+ priv->process_packet = alps_process_touchpad_packet_v3_v5;
- priv->decode_fields = alps_decode_dolphin;
- priv->set_abs_params = alps_set_abs_params_mt;
- priv->nibble_commands = alps_v3_nibble_commands;
- priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
- priv->byte0 = 0xc8;
-- priv->mask0 = 0xc8;
-+ priv->mask0 = 0xd8;
- priv->flags = 0;
- priv->x_max = 1360;
- priv->y_max = 660;
-@@ -1845,11 +1975,13 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
- if (alps_match_table(psmouse, priv, e7, ec) == 0) {
- return 0;
- } else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 &&
-- ec[0] == 0x73 && ec[1] == 0x01) {
-+ ec[0] == 0x73 && (ec[1] == 0x01 || ec[1] == 0x02)) {
- priv->proto_version = ALPS_PROTO_V5;
- alps_set_defaults(priv);
--
-- return 0;
-+ if (alps_dolphin_get_device_area(psmouse, priv))
-+ return -EIO;
-+ else
-+ return 0;
- } else if (ec[0] == 0x88 && ec[1] == 0x08) {
- priv->proto_version = ALPS_PROTO_V3;
- alps_set_defaults(priv);
-diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
-index 704f0f9..03f88b6 100644
---- a/drivers/input/mouse/alps.h
-+++ b/drivers/input/mouse/alps.h
-@@ -19,6 +19,10 @@
- #define ALPS_PROTO_V5 5
- #define ALPS_PROTO_V6 6
-
-+#define DOLPHIN_COUNT_PER_ELECTRODE 64
-+#define DOLPHIN_PROFILE_XOFFSET 8 /* x-electrode offset */
-+#define DOLPHIN_PROFILE_YOFFSET 1 /* y-electrode offset */
-+
- /**
- * struct alps_model_info - touchpad ID table
- * @signature: E7 response string to match.
-@@ -146,7 +150,8 @@ struct alps_data {
-
- int (*hw_init)(struct psmouse *psmouse);
- void (*process_packet)(struct psmouse *psmouse);
-- void (*decode_fields)(struct alps_fields *f, unsigned char *p);
-+ void (*decode_fields)(struct alps_fields *f, unsigned char *p,
-+ struct psmouse *psmouse);
- void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1);
-
- int prev_fin;
---
-1.8.4.2
-
diff --git a/config-generic b/config-generic
index 239ea05bf..479bfda3a 100644
--- a/config-generic
+++ b/config-generic
@@ -182,6 +182,7 @@ CONFIG_INFINIBAND_NES=m
CONFIG_INFINIBAND_QIB=m
CONFIG_INFINIBAND_QIB_DCA=y
# CONFIG_INFINIBAND_OCRDMA is not set
+# CONFIG_INFINIBAND_USNIC is not set
#
# Executable file formats
@@ -3200,6 +3201,7 @@ CONFIG_FB_EFI=y
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_GOLDFISH is not set
+# CONFIG_FB_OPENCORES is not set
# CONFIG_FIRMWARE_EDID is not set
@@ -4511,6 +4513,7 @@ CONFIG_THERMAL_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_EMULATION is not set
+# CONFIG_THERMAL_OF is not set
# CONFIG_CPU_THERMAL is not set
CONFIG_INOTIFY=y
@@ -4772,6 +4775,7 @@ CONFIG_NOZOMI=m
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_GP2A=m
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
+# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_ENCLOSURE_SERVICES=m
diff --git a/config-x86-generic b/config-x86-generic
index 53d463df4..3a4fd99a7 100644
--- a/config-x86-generic
+++ b/config-x86-generic
@@ -450,6 +450,7 @@ CONFIG_PINCTRL_BAYTRAIL=y
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_PKG_TEMP_THERMAL=m
+CONFIG_ACPI_INT3403_THERMAL=m
CONFIG_VMWARE_VMCI=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
diff --git a/elantech-Properly-differentiate-between-clickpads-an.patch b/elantech-Properly-differentiate-between-clickpads-an.patch
deleted file mode 100644
index 3fc49980b..000000000
--- a/elantech-Properly-differentiate-between-clickpads-an.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-Bugzilla: 1030802
-Upstream-status: http://www.mail-archive.com/linux-input@vger.kernel.org/msg07220.html
-
-From e1c7fa5fbb6688bd464658ff8a93bdf23c442065 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Mon, 9 Dec 2013 15:18:04 +0100
-Subject: [PATCH v2] elantech: Properly differentiate between clickpads and
- normal touchpads
-
-The current assumption in the elantech driver that hw version 3 touchpads are
-never clickpads and hw version 4 touchpads are always clickpads is wrong.
-
-There are several bug reports for this, ie:
-https://bugzilla.redhat.com/show_bug.cgi?id=1030802
-http://superuser.com/questions/619582/right-elantech-touchpad-button-not-working-in-linux
-
-I've spend a couple of hours wading through various bugzillas,
-launchpads and forum posts to create a list of fw-versions and capabilities
-for different laptop models to find a good method to differentiate between
-clickpads and versions with separate hardware buttons.
-
-Which shows that a device being a clickpad is reliable indicated by bit 12
-being set in the fw_version. I've included the gathered list inside the driver,
-so that we've this info at hand if we need to revisit this later.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/input/mouse/elantech.c | 45 +++++++++++++++++++++++++++++++++++++++---
- 1 file changed, 42 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
-index 597e9b8..ef1cf52 100644
---- a/drivers/input/mouse/elantech.c
-+++ b/drivers/input/mouse/elantech.c
-@@ -486,6 +486,7 @@ static void elantech_input_sync_v4(struct psmouse *psmouse)
- unsigned char *packet = psmouse->packet;
-
- input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
-+ input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
- input_mt_report_pointer_emulation(dev, true);
- input_sync(dev);
- }
-@@ -984,6 +985,44 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse,
- }
-
- /*
-+ * Advertise INPUT_PROP_BUTTONPAD for clickpads. The testing of bit 12 in
-+ * fw_version for this is based on the following fw_version & caps table:
-+ *
-+ * Laptop-model: fw_version: caps: buttons:
-+ * Acer S3 0x461f00 10, 13, 0e clickpad
-+ * Acer S7-392 0x581f01 50, 17, 0d clickpad
-+ * Acer V5-131 0x461f02 01, 16, 0c clickpad
-+ * Acer V5-551 0x461f00 ? clickpad
-+ * Asus K53SV 0x450f01 78, 15, 0c 2 hw buttons
-+ * Asus G46VW 0x460f02 00, 18, 0c 2 hw buttons
-+ * Asus G750JX 0x360f00 00, 16, 0c 2 hw buttons
-+ * Asus UX31 0x361f00 20, 15, 0e clickpad
-+ * Asus UX32VD 0x361f02 00, 15, 0e clickpad
-+ * Avatar AVIU-145A2 0x361f00 ? clickpad
-+ * Gigabyte U2442 0x450f01 58, 17, 0c 2 hw buttons
-+ * Lenovo L430 0x350f02 b9, 15, 0c 2 hw buttons (*)
-+ * Samsung NF210 0x150b00 78, 14, 0a 2 hw buttons
-+ * Samsung NP770Z5E 0x575f01 10, 15, 0f clickpad
-+ * Samsung NP700Z5B 0x361f06 21, 15, 0f clickpad
-+ * Samsung NP900X3E-A02 0x575f03 ? clickpad
-+ * Samsung NP-QX410 0x851b00 19, 14, 0c clickpad
-+ * Samsung RC512 0x450f00 08, 15, 0c 2 hw buttons
-+ * Samsung RF710 0x450f00 ? 2 hw buttons
-+ * System76 Pangolin 0x250f01 ? 2 hw buttons
-+ * (*) + 3 trackpoint buttons
-+ */
-+static void elantech_set_buttonpad_prop(struct psmouse *psmouse)
-+{
-+ struct input_dev *dev = psmouse->dev;
-+ struct elantech_data *etd = psmouse->private;
-+
-+ if (etd->fw_version & 0x001000) {
-+ __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
-+ __clear_bit(BTN_RIGHT, dev->keybit);
-+ }
-+}
-+
-+/*
- * Set the appropriate event bits for the input subsystem
- */
- static int elantech_set_input_params(struct psmouse *psmouse)
-@@ -1026,6 +1065,8 @@ static int elantech_set_input_params(struct psmouse *psmouse)
- __set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
- /* fall through */
- case 3:
-+ if (etd->hw_version == 3)
-+ elantech_set_buttonpad_prop(psmouse);
- input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
- input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
- if (etd->reports_pressure) {
-@@ -1047,9 +1088,7 @@ static int elantech_set_input_params(struct psmouse *psmouse)
- */
- psmouse_warn(psmouse, "couldn't query resolution data.\n");
- }
-- /* v4 is clickpad, with only one button. */
-- __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
-- __clear_bit(BTN_RIGHT, dev->keybit);
-+ elantech_set_buttonpad_prop(psmouse);
- __set_bit(BTN_TOOL_QUADTAP, dev->keybit);
- /* For X to recognize me as touchpad. */
- input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
---
-1.8.4.2
-
diff --git a/kernel.spec b/kernel.spec
index 3003c39ae..c87f18383 100644
--- a/kernel.spec
+++ b/kernel.spec
@@ -61,7 +61,7 @@ Summary: The Linux kernel
# The rc snapshot level
%define rcrev 0
# The git snapshot level
-%define gitrev 8
+%define gitrev 9
# Set rpm version accordingly
%define rpmversion 3.%{upstream_sublevel}.0
%endif
@@ -627,23 +627,15 @@ Patch25166: sunrpc-add-an-info-file-for-the-dummy-gssd-pipe.patch
Patch25167: rpc_pipe-remove-the-clntXX-dir-if-creating-the-pipe-fails.patch
Patch25168: rpc_pipe-fix-cleanup-of-dummy-gssd-directory-when-notification-fails.patch
-#rhbz 1030802
-Patch25171: elantech-Properly-differentiate-between-clickpads-an.patch
-
-#rhbz 1003167 1046238
-Patch25181: 0001-Input-wacom-make-sure-touch_max-is-set-for-touch-dev.patch
-Patch25182: 0002-Input-wacom-add-support-for-three-new-Intuos-devices.patch
-Patch25183: 0003-Input-wacom-add-reporting-of-SW_MUTE_DEVICE-events.patch
-
-#rhbz 953211
-Patch25184: Input-ALPS-add-support-for-Dolphin-devices.patch
-
Patch25185: perf-plugin-dir.patch
Patch25186: peterz-printk-timestamp-fix.patch
Patch25187: revert-fsnotify-changes.patch
+#rhbz 1057529
+Patch25188: 0001-usb-phy-Quiet-unable-to-find-transceiver-message.patch
+
# END OF PATCH DEFINITIONS
%endif
@@ -1293,17 +1285,6 @@ ApplyPatch rpc_pipe-remove-the-clntXX-dir-if-creating-the-pipe-fails.patch
ApplyPatch sunrpc-add-an-info-file-for-the-dummy-gssd-pipe.patch
ApplyPatch rpc_pipe-fix-cleanup-of-dummy-gssd-directory-when-notification-fails.patch
-#rhbz 1030802
-ApplyPatch elantech-Properly-differentiate-between-clickpads-an.patch
-
-#rhbz 1003167 1046238
-ApplyPatch 0001-Input-wacom-make-sure-touch_max-is-set-for-touch-dev.patch
-ApplyPatch 0002-Input-wacom-add-support-for-three-new-Intuos-devices.patch
-ApplyPatch 0003-Input-wacom-add-reporting-of-SW_MUTE_DEVICE-events.patch
-
-#rhbz 953211
-ApplyPatch Input-ALPS-add-support-for-Dolphin-devices.patch
-
ApplyPatch perf-plugin-dir.patch
ApplyPatch peterz-printk-timestamp-fix.patch
@@ -1312,6 +1293,9 @@ ApplyPatch peterz-printk-timestamp-fix.patch
# Revert them until they're worked out upstream
ApplyPatch revert-fsnotify-changes.patch
+# rhbz 1057529
+ApplyPatch 0001-usb-phy-Quiet-unable-to-find-transceiver-message.patch
+
# END OF PATCH APPLICATIONS
%endif
@@ -2091,6 +2075,10 @@ fi
# ||----w |
# || ||
%changelog
+* Sat Jan 25 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.14.0-0.rc0.git9.1
+- Linux v3.13-6058-g2d08cd0
+- Quiet incorrect usb phy error (rhbz 1057529)
+
* Sat Jan 25 2014 Ville Skyttä <ville.skytta@iki.fi>
- Own the /lib/modules dir.
diff --git a/sources b/sources
index a6cc6d36e..72289d578 100644
--- a/sources
+++ b/sources
@@ -1,3 +1,3 @@
0ecbaf65c00374eb4a826c2f9f37606f linux-3.13.tar.xz
732d1952898b28d5ccc264cad77b0619 perf-man-3.13.tar.gz
-14d8805fe0e54d5d7b7d1c4b20c20f16 patch-3.13-git8.xz
+c501aeaa0ddabd55b087c8f8d7fb954a patch-3.13-git9.xz