diff options
27 files changed, 3161 insertions, 0 deletions
diff --git a/PCI-aspm-deal-with-missing-root-ports-in-link-state-handling.patch b/PCI-aspm-deal-with-missing-root-ports-in-link-state-handling.patch new file mode 100644 index 000000000..03b011561 --- /dev/null +++ b/PCI-aspm-deal-with-missing-root-ports-in-link-state-handling.patch @@ -0,0 +1,55 @@ +From patchwork Mon Oct 2 14:08:40 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: PCI: aspm: deal with missing root ports in link state handling +From: Ard Biesheuvel <ard.biesheuvel@linaro.org> +X-Patchwork-Id: 9980861 +Message-Id: <20171002140840.7767-1-ard.biesheuvel@linaro.org> +To: linux-pci@vger.kernel.org, bhelgaas@google.com +Cc: graeme.gregory@linaro.org, leif.lindholm@linaro.org, + daniel.thompson@Linaro.org, Ard Biesheuvel <ard.biesheuvel@linaro.org> +Date: Mon, 2 Oct 2017 15:08:40 +0100 + +Even though it is unconventional, some PCIe host implementations omit +the root ports entirely, and simply consist of a host bridge (which +is not modeled as a device in the PCI hierarchy) and a link. + +When the downstream device is an endpoint, our current code does not +seem to mind this unusual configuration. However, when PCIe switches +are involved, the ASPM code assumes that any downstream switch port +has a parent, and blindly derefences the bus->parent->self field of +the pci_dev struct to chain the downstream link state to the link +state of the root port. Given that the root port is missing, the link +is not modeled at all, and nor is the link state, and attempting to +access it results in a NULL pointer dereference and a crash. + +So let's avoid this by allowing the link state chain to terminate at +the downstream port if no root port exists. + +Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> +--- + drivers/pci/pcie/aspm.c | 8 ++++++-- + 1 file changed, 6 insertions(+), 2 deletions(-) + +diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c +index 1dfa10cc566b..0bea8498b5a5 100644 +--- a/drivers/pci/pcie/aspm.c ++++ b/drivers/pci/pcie/aspm.c +@@ -802,10 +802,14 @@ static struct pcie_link_state *alloc_pcie_link_state(struct pci_dev *pdev) + + /* + * Root Ports and PCI/PCI-X to PCIe Bridges are roots of PCIe +- * hierarchies. ++ * hierarchies. Note that some PCIe host implementations omit ++ * the root ports entirely, in which case a downstream port on ++ * a switch may become the root of the link state chain for all ++ * its subordinate endpoints. + */ + if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT || +- pci_pcie_type(pdev) == PCI_EXP_TYPE_PCIE_BRIDGE) { ++ pci_pcie_type(pdev) == PCI_EXP_TYPE_PCIE_BRIDGE || ++ !pdev->bus->parent->self) { + link->root = link; + } else { + struct pcie_link_state *parent; diff --git a/arm64-socionext-96b-enablement.patch b/arm64-socionext-96b-enablement.patch new file mode 100644 index 000000000..52bae8817 --- /dev/null +++ b/arm64-socionext-96b-enablement.patch @@ -0,0 +1,3050 @@ +From 58be18a7bbf9dca67f4260ac172a44baa59d0ee9 Mon Sep 17 00:00:00 2001 +From: Ard Biesheuvel <ard.biesheuvel@linaro.org> +Date: Mon, 21 Aug 2017 10:47:48 +0100 +Subject: arm64: acpi/gtdt: validate CNTFRQ after having enabled the frame + +The ACPI GTDT code validates the CNTFRQ field of each MMIO timer +frame against the CNTFRQ system register of the current CPU, to +ensure that they are equal, which is mandated by the architecture. + +However, reading the CNTFRQ field of a frame is not possible until +the RFRQ bit in the frame's CNTACRn register is set, and doing so +before that willl produce the following error: + + arch_timer: [Firmware Bug]: CNTFRQ mismatch: frame @ 0x00000000e0be0000: (0x00000000), CPU: (0x0ee6b280) + arch_timer: Disabling MMIO timers due to CNTFRQ mismatch + arch_timer: Failed to initialize memory-mapped timer. + +The reason is that the CNTFRQ field is RES0 if access is not enabled. + +So move the validation of CNTFRQ into the loop that iterates over the +timers to find the best frame, but defer it until after we have selected +the best frame, which should also have enabled the RFRQ bit. + +Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> +--- + drivers/clocksource/arm_arch_timer.c | 38 ++++++++++++++++++++---------------- + 1 file changed, 21 insertions(+), 17 deletions(-) + +diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c +index fd4b7f6..14e2419 100644 +--- a/drivers/clocksource/arm_arch_timer.c ++++ b/drivers/clocksource/arm_arch_timer.c +@@ -1268,10 +1268,6 @@ arch_timer_mem_find_best_frame(struct arch_timer_mem *timer_mem) + + iounmap(cntctlbase); + +- if (!best_frame) +- pr_err("Unable to find a suitable frame in timer @ %pa\n", +- &timer_mem->cntctlbase); +- + return best_frame; + } + +@@ -1372,6 +1368,8 @@ static int __init arch_timer_mem_of_init(struct device_node *np) + + frame = arch_timer_mem_find_best_frame(timer_mem); + if (!frame) { ++ pr_err("Unable to find a suitable frame in timer @ %pa\n", ++ &timer_mem->cntctlbase); + ret = -EINVAL; + goto out; + } +@@ -1420,7 +1418,7 @@ arch_timer_mem_verify_cntfrq(struct arch_timer_mem *timer_mem) + static int __init arch_timer_mem_acpi_init(int platform_timer_count) + { + struct arch_timer_mem *timers, *timer; +- struct arch_timer_mem_frame *frame; ++ struct arch_timer_mem_frame *frame, *best_frame = NULL; + int timer_count, i, ret = 0; + + timers = kcalloc(platform_timer_count, sizeof(*timers), +@@ -1432,14 +1430,6 @@ static int __init arch_timer_mem_acpi_init(int platform_timer_count) + if (ret || !timer_count) + goto out; + +- for (i = 0; i < timer_count; i++) { +- ret = arch_timer_mem_verify_cntfrq(&timers[i]); +- if (ret) { +- pr_err("Disabling MMIO timers due to CNTFRQ mismatch\n"); +- goto out; +- } +- } +- + /* + * While unlikely, it's theoretically possible that none of the frames + * in a timer expose the combination of feature we want. +@@ -1448,12 +1438,26 @@ static int __init arch_timer_mem_acpi_init(int platform_timer_count) + timer = &timers[i]; + + frame = arch_timer_mem_find_best_frame(timer); +- if (frame) +- break; ++ if (!best_frame) ++ best_frame = frame; ++ ++ ret = arch_timer_mem_verify_cntfrq(timer); ++ if (ret) { ++ pr_err("Disabling MMIO timers due to CNTFRQ mismatch\n"); ++ goto out; ++ } ++ ++ if (!best_frame) /* implies !frame */ ++ /* ++ * Only complain about missing suitable frames if we ++ * haven't already found one in a previous iteration. ++ */ ++ pr_err("Unable to find a suitable frame in timer @ %pa\n", ++ &timer->cntctlbase); + } + +- if (frame) +- ret = arch_timer_mem_frame_register(frame); ++ if (best_frame) ++ ret = arch_timer_mem_frame_register(best_frame); + out: + kfree(timers); + return ret; +-- +cgit v1.1 + +From 33d983b5bb2929ae242606925e708092b1dfdd8f Mon Sep 17 00:00:00 2001 +From: Ard Biesheuvel <ard.biesheuvel@linaro.org> +Date: Sat, 2 Sep 2017 11:01:22 +0100 +Subject: drivers/irqchip: gicv3: add workaround for Synquacer pre-ITS + +In their infinite wisdom, the Socionext engineers have decided +that ITS device IDs should not be hardwired, but it should be +left up to the software to assign them, by allowing it to +redirect MSI doorbell writes via a separate hardware block +that issues the doorbell write with a device ID that is +derived from the memory address. This completely breaks any +kind of isolation, or virtualization in general, for that +matter, but add support for it nonetheless. + +Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> +--- + arch/arm64/Kconfig | 8 +++++++ + drivers/irqchip/irq-gic-v3-its.c | 48 +++++++++++++++++++++++++++++++++++----- + 2 files changed, 51 insertions(+), 5 deletions(-) + +diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig +index 0df64a6..c4361df 100644 +--- a/arch/arm64/Kconfig ++++ b/arch/arm64/Kconfig +@@ -539,6 +539,14 @@ config QCOM_QDF2400_ERRATUM_0065 + + If unsure, say Y. + ++config SOCIONEXT_SYNQUACER_PREITS ++ bool "Socionext Synquacer: Workaround for GICv3 pre-ITS" ++ default y ++ help ++ Socionext Synquacer SoCs implement a separate h/w block to generate ++ MSI doorbell writes with non-zero values for the device ID. ++ ++ If unsure, say Y. + endmenu + + +diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c +index e8d8934..0d372f1 100644 +--- a/drivers/irqchip/irq-gic-v3-its.c ++++ b/drivers/irqchip/irq-gic-v3-its.c +@@ -46,6 +46,7 @@ + #define ITS_FLAGS_CMDQ_NEEDS_FLUSHING (1ULL << 0) + #define ITS_FLAGS_WORKAROUND_CAVIUM_22375 (1ULL << 1) + #define ITS_FLAGS_WORKAROUND_CAVIUM_23144 (1ULL << 2) ++#define ITS_FLAGS_WORKAROUND_SOCIONEXT_PREITS (1ULL << 3) + + #define RDIST_FLAGS_PROPBASE_NEEDS_FLUSHING (1 << 0) + +@@ -99,6 +100,10 @@ struct its_node { + struct its_collection *collections; + struct list_head its_device_list; + u64 flags; ++#ifdef CONFIG_SOCIONEXT_SYNQUACER_PREITS ++ u64 pre_its_base; ++ u64 pre_its_size; ++#endif + u32 ite_size; + u32 device_ids; + int numa_node; +@@ -1102,13 +1107,29 @@ static void its_irq_compose_msi_msg(struct irq_data *d, struct msi_msg *msg) + u64 addr; + + its = its_dev->its; +- addr = its->phys_base + GITS_TRANSLATER; ++ ++#ifdef CONFIG_SOCIONEXT_SYNQUACER_PREITS ++ if (its->flags & ITS_FLAGS_WORKAROUND_SOCIONEXT_PREITS) ++ ++ /* ++ * The Socionext Synquacer SoC has a so-called 'pre-ITS', ++ * which maps 32-bit writes into a separate window of size ++ * '4 << device_id_bits' onto writes to GITS_TRANSLATER with ++ * device ID taken from bits [device_id_bits + 1:2] of the ++ * window offset. ++ */ ++ addr = its->pre_its_base + (its_dev->device_id << 2); ++ else ++#endif ++ addr = its->phys_base + GITS_TRANSLATER; + + msg->address_lo = lower_32_bits(addr); + msg->address_hi = upper_32_bits(addr); + msg->data = its_get_event_id(d); + +- iommu_dma_map_msi_msg(d->irq, msg); ++ if (!IS_ENABLED(CONFIG_SOCIONEXT_SYNQUACER_PREITS) || ++ !(its->flags & ITS_FLAGS_WORKAROUND_SOCIONEXT_PREITS)) ++ iommu_dma_map_msi_msg(d->irq, msg); + } + + static int its_irq_set_irqchip_state(struct irq_data *d, +@@ -1666,6 +1687,11 @@ static int its_alloc_tables(struct its_node *its) + ids = 0x14; /* 20 bits, 8MB */ + } + ++#ifdef CONFIG_SOCIONEXT_SYNQUACER_PREITS ++ if (its->flags & ITS_FLAGS_WORKAROUND_SOCIONEXT_PREITS) ++ ids = ilog2(its->pre_its_size) - 2; ++#endif ++ + its->device_ids = ids; + + for (i = 0; i < GITS_BASER_NR_REGS; i++) { +@@ -2788,11 +2814,21 @@ static const struct gic_quirk its_quirks[] = { + } + }; + +-static void its_enable_quirks(struct its_node *its) ++static void its_enable_quirks(struct its_node *its, ++ struct fwnode_handle *handle) + { + u32 iidr = readl_relaxed(its->base + GITS_IIDR); + + gic_enable_quirks(iidr, its_quirks, its); ++ ++#ifdef CONFIG_SOCIONEXT_SYNQUACER_PREITS ++ if (!fwnode_property_read_u64_array(handle, ++ "socionext,synquacer-pre-its", ++ &its->pre_its_base, 2)) { ++ its->flags |= ITS_FLAGS_WORKAROUND_SOCIONEXT_PREITS; ++ pr_info("ITS: enabling workaround for Socionext Synquacer pre-ITS\n"); ++ } ++#endif + } + + static int its_init_domain(struct fwnode_handle *handle, struct its_node *its) +@@ -2812,7 +2848,9 @@ static int its_init_domain(struct fwnode_handle *handle, struct its_node *its) + + inner_domain->parent = its_parent; + irq_domain_update_bus_token(inner_domain, DOMAIN_BUS_NEXUS); +- inner_domain->flags |= IRQ_DOMAIN_FLAG_MSI_REMAP; ++ ++ if (!(its->flags & ITS_FLAGS_WORKAROUND_SOCIONEXT_PREITS)) ++ inner_domain->flags |= IRQ_DOMAIN_FLAG_MSI_REMAP; + info->ops = &its_msi_domain_ops; + info->data = its; + inner_domain->host_data = info; +@@ -2966,7 +3004,7 @@ static int __init its_probe_one(struct resource *res, + } + its->cmd_write = its->cmd_base; + +- its_enable_quirks(its); ++ its_enable_quirks(its, handle); + + err = its_alloc_tables(its); + if (err) +-- +cgit v1.1 + +From 26e7bb47b0fb03a01be1e391a08c7375b45335a2 Mon Sep 17 00:00:00 2001 +From: Ard Biesheuvel <ard.biesheuvel@linaro.org> +Date: Mon, 21 Aug 2017 20:29:05 +0100 +Subject: pci: designware: add driver for DWC controller in ECAM shift mode + +Some implementations of the Synopsys Designware PCIe controller implement +a so-called ECAM shift mode, which allows a static memory window to be +configured that covers the configuration space of the entire bus range. + +If the firmware performs all the low level configuration that is required +to expose this controller in a fully ECAM compatible manner, we can +simply describe it as "pci-host-ecam-generic" and be done with it. +However, it appears that in some cases (one of which is the Armada 80x0), +the IP is synthesized with an ATU window size that does not allow the +first bus to be mapped in a way that prevents the device on the +downstream port from appearing more than once. + +So implement a driver that relies on the firmware to perform all low +level initialization, and drives the controller in ECAM mode, but +overrides the config space accessors to take the above quirk into +account. + +Note that, unlike most drivers for this IP, this driver does not expose +a fake bridge device at B/D/F 00:00.0. There is no point in doing so, +given that this is not a true bridge, and does not require any windows +to be configured in order for the downstream device to operate correctly. +Omitting it also prevents the PCI resource allocation routines from +handing out BAR space to it unnecessarily. + +Cc: Bjorn Helgaas <bhelgaas@google.com> +Cc: Jingoo Han <jingoohan1@gmail.com> +Cc: Joao Pinto <Joao.Pinto@synopsys.com> +Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> +--- + drivers/pci/dwc/Kconfig | 11 +++++ + drivers/pci/dwc/Makefile | 1 + + drivers/pci/dwc/pcie-designware-ecam.c | 77 ++++++++++++++++++++++++++++++++++ + 3 files changed, 89 insertions(+) + create mode 100644 drivers/pci/dwc/pcie-designware-ecam.c + +diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig +index 22ec82f..19856b1 100644 +--- a/drivers/pci/dwc/Kconfig ++++ b/drivers/pci/dwc/Kconfig +@@ -169,4 +169,15 @@ config PCIE_KIRIN + Say Y here if you want PCIe controller support + on HiSilicon Kirin series SoCs. + ++config PCIE_DW_HOST_ECAM ++ bool "Synopsys DesignWare PCIe controller in ECAM mode" ++ depends on OF && PCI ++ select PCI_HOST_COMMON ++ select IRQ_DOMAIN ++ help ++ Add support for Synopsys DesignWare PCIe controllers configured ++ by the firmware into ECAM shift mode. In some cases, these are ++ fully ECAM compliant, in which case the pci-host-generic driver ++ may be used instead. ++ + endmenu +diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile +index c61be97..7d5a23e 100644 +--- a/drivers/pci/dwc/Makefile ++++ b/drivers/pci/dwc/Makefile +@@ -1,5 +1,6 @@ + obj-$(CONFIG_PCIE_DW) += pcie-designware.o + obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o ++obj-$(CONFIG_PCIE_DW_HOST_ECAM) += pcie-designware-ecam.o + obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o + obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o + ifneq ($(filter y,$(CONFIG_PCI_DRA7XX_HOST) $(CONFIG_PCI_DRA7XX_EP)),) +diff --git a/drivers/pci/dwc/pcie-designware-ecam.c b/drivers/pci/dwc/pcie-designware-ecam.c +new file mode 100644 +index 0000000..ede627d +--- /dev/null ++++ b/drivers/pci/dwc/pcie-designware-ecam.c +@@ -0,0 +1,77 @@ ++/* ++ * Driver for mostly ECAM compatible Synopsys dw PCIe controllers ++ * configured by the firmware into RC mode ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * Copyright (C) 2014 ARM Limited ++ * Copyright (C) 2017 Linaro Limited ++ * ++ * Authors: Will Deacon <will.deacon@arm.com> ++ * Ard Biesheuvel <ard.biesheuvel@linaro.org> ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/of_address.h> ++#include <linux/of_pci.h> ++#include <linux/pci-ecam.h> ++#include <linux/platform_device.h> ++ ++static int pci_dw_ecam_config_read(struct pci_bus *bus, u32 devfn, int where, ++ int size, u32 *val) ++{ ++ struct pci_config_window *cfg = bus->sysdata; ++ ++ /* ++ * The Synopsys dw PCIe controller in RC mode will not filter type 0 ++ * config TLPs sent to devices 1 and up on its downstream port, ++ * resulting in devices appearing multiple times on bus 0 unless we ++ * filter them here. ++ */ ++ if (bus->number == cfg->busr.start && PCI_SLOT(devfn) > 0) { ++ *val = 0xffffffff; ++ return PCIBIOS_DEVICE_NOT_FOUND; ++ } ++ return pci_generic_config_read(bus, devfn, where, size, val); ++} ++ ++static int pci_dw_ecam_config_write(struct pci_bus *bus, u32 devfn, int where, ++ int size, u32 val) ++{ ++ struct pci_config_window *cfg = bus->sysdata; ++ ++ if (bus->number == cfg->busr.start && PCI_SLOT(devfn) > 0) ++ return PCIBIOS_DEVICE_NOT_FOUND; ++ ++ return pci_generic_config_write(bus, devfn, where, size, val); ++} ++ ++static struct pci_ecam_ops pci_dw_ecam_bus_ops = { ++ .pci_ops.map_bus = pci_ecam_map_bus, ++ .pci_ops.read = pci_dw_ecam_config_read, ++ .pci_ops.write = pci_dw_ecam_config_write, ++ .bus_shift = 20, ++}; ++ ++static const struct of_device_id pci_dw_ecam_of_match[] = { ++ { .compatible = "marvell,armada8k-pcie-ecam" }, ++ { .compatible = "socionext,synquacer-pcie-ecam" }, ++ { .compatible = "snps,dw-pcie-ecam" }, ++ { }, ++}; ++ ++static int pci_dw_ecam_probe(struct platform_device *pdev) ++{ ++ return pci_host_common_probe(pdev, &pci_dw_ecam_bus_ops); ++} ++ ++static struct platform_driver pci_dw_ecam_driver = { ++ .driver.name = "pcie-designware-ecam", ++ .driver.of_match_table = pci_dw_ecam_of_match, ++ .driver.suppress_bind_attrs = true, ++ .probe = pci_dw_ecam_probe, ++}; ++builtin_platform_driver(pci_dw_ecam_driver); +-- +cgit v1.1 + +From e3dff048a10f16aa0fd32438442ce39558bbdbef Mon Sep 17 00:00:00 2001 +From: Jassi Brar <jaswinder.singh@linaro.org> +Date: Tue, 29 Aug 2017 22:45:59 +0530 +Subject: net: socionext: Add Synquacer NetSec driver + +This driver adds support for Socionext "netsec" IP Gigabit +Ethernet + PHY IP used in the Synquacer SC2A11 SoC. + +Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> +Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> +--- + drivers/net/ethernet/Kconfig | 1 + + drivers/net/ethernet/Makefile | 1 + + drivers/net/ethernet/socionext/Kconfig | 29 + + drivers/net/ethernet/socionext/Makefile | 1 + + drivers/net/ethernet/socionext/netsec/Makefile | 6 + + drivers/net/ethernet/socionext/netsec/netsec.h | 408 ++++++++++++++ + .../socionext/netsec/netsec_desc_ring_access.c | 623 +++++++++++++++++++++ + .../net/ethernet/socionext/netsec/netsec_ethtool.c | 78 +++ + .../ethernet/socionext/netsec/netsec_gmac_access.c | 330 +++++++++++ + .../net/ethernet/socionext/netsec/netsec_netdev.c | 540 ++++++++++++++++++ + .../ethernet/socionext/netsec/netsec_platform.c | 435 ++++++++++++++ + 11 files changed, 2452 insertions(+) + create mode 100644 drivers/net/ethernet/socionext/Kconfig + create mode 100644 drivers/net/ethernet/socionext/Makefile + create mode 100644 drivers/net/ethernet/socionext/netsec/Makefile + create mode 100644 drivers/net/ethernet/socionext/netsec/netsec.h + create mode 100644 drivers/net/ethernet/socionext/netsec/netsec_desc_ring_access.c + create mode 100644 drivers/net/ethernet/socionext/netsec/netsec_ethtool.c + create mode 100644 drivers/net/ethernet/socionext/netsec/netsec_gmac_access.c + create mode 100644 drivers/net/ethernet/socionext/netsec/netsec_netdev.c + create mode 100644 drivers/net/ethernet/socionext/netsec/netsec_platform.c + +diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig +index c604213..d50519e 100644 +--- a/drivers/net/ethernet/Kconfig ++++ b/drivers/net/ethernet/Kconfig +@@ -170,6 +170,7 @@ source "drivers/net/ethernet/sis/Kconfig" + source "drivers/net/ethernet/sfc/Kconfig" + source "drivers/net/ethernet/sgi/Kconfig" + source "drivers/net/ethernet/smsc/Kconfig" ++source "drivers/net/ethernet/socionext/Kconfig" + source "drivers/net/ethernet/stmicro/Kconfig" + source "drivers/net/ethernet/sun/Kconfig" + source "drivers/net/ethernet/tehuti/Kconfig" +diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile +index a0a03d4..6ae1bb9 100644 +--- a/drivers/net/ethernet/Makefile ++++ b/drivers/net/ethernet/Makefile +@@ -81,6 +81,7 @@ obj-$(CONFIG_SFC) += sfc/ + obj-$(CONFIG_SFC_FALCON) += sfc/falcon/ + obj-$(CONFIG_NET_VENDOR_SGI) += sgi/ + obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/ ++obj-$(CONFIG_NET_VENDOR_SNI) += socionext/ + obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/ + obj-$(CONFIG_NET_VENDOR_SUN) += sun/ + obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/ +diff --git a/drivers/net/ethernet/socionext/Kconfig b/drivers/net/ethernet/socionext/Kconfig +new file mode 100644 +index 0000000..a6dc195 +--- /dev/null ++++ b/drivers/net/ethernet/socionext/Kconfig +@@ -0,0 +1,29 @@ ++# ++# Socionext Network device configuration ++# ++ ++config NET_VENDOR_SNI ++ bool "Socionext devices" ++ default y ++ ---help--- ++ If you have a network (Ethernet) card belonging to this class, say Y. ++ ++ Note that the answer to this question doesn't directly affect the ++ the questions about Socionext cards. If you say Y, you will be asked ++ for your specific card in the following questions. ++ ++if NET_VENDOR_SNI ++ ++config SNI_NETSEC ++ tristate "NETSEC Driver Support" ++ depends on OF ++ select PHYLIB ++ select MII ++help ++ Enable to add support for the SocioNext NetSec Gigabit Ethernet ++ controller + PHY, as found on the Synquacer SC2A11 SoC ++ ++ To compile this driver as a module, choose M here: the module will be ++ called netsec. If unsure, say N. ++ ++endif # NET_VENDOR_SNI +diff --git a/drivers/net/ethernet/socionext/Makefile b/drivers/net/ethernet/socionext/Makefile +new file mode 100644 +index 0000000..9555899 +--- /dev/null ++++ b/drivers/net/ethernet/socionext/Makefile +@@ -0,0 +1 @@ ++obj-$(CONFIG_SNI_NETSEC) += netsec/ +diff --git a/drivers/net/ethernet/socionext/netsec/Makefile b/drivers/net/ethernet/socionext/netsec/Makefile +new file mode 100644 +index 0000000..18884ed +--- /dev/null ++++ b/drivers/net/ethernet/socionext/netsec/Makefile +@@ -0,0 +1,6 @@ ++obj-$(CONFIG_SNI_NETSEC) := netsec.o ++netsec-objs := netsec_desc_ring_access.o \ ++ netsec_netdev.o \ ++ netsec_ethtool.o \ ++ netsec_platform.o \ ++ netsec_gmac_access.o +diff --git a/drivers/net/ethernet/socionext/netsec/netsec.h b/drivers/net/ethernet/socionext/netsec/netsec.h +new file mode 100644 +index 0000000..3b97661 +--- /dev/null ++++ b/drivers/net/ethernet/socionext/netsec/netsec.h +@@ -0,0 +1,408 @@ ++/** ++ * netsec.h ++ * ++ * Copyright (C) 2013-2014 Fujitsu Semiconductor Limited. ++ * Copyright (C) 2014-2017 Linaro Ltd. All rights reserved. ++ * Andy Green <andy.green@linaro.org> ++ * Jassi Brar <jaswinder.singh@linaro.org> ++ * Ard Biesheuvel <ard.biesheuvel@linaro.org> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ */ ++#ifndef NETSEC_INTERNAL_H ++#define NETSEC_INTERNAL_H ++ ++#include <linux/netdevice.h> ++#include <linux/types.h> ++#include <linux/device.h> ++#include <linux/phy.h> ++#include <linux/ethtool.h> ++#include <linux/of_address.h> ++#include <linux/of_mdio.h> ++#include <linux/etherdevice.h> ++#include <net/sock.h> ++ ++#define NETSEC_FLOW_CONTROL_START_THRESHOLD 36 ++#define NETSEC_FLOW_CONTROL_STOP_THRESHOLD 48 ++ ++#define NETSEC_CLK_MHZ 1000000 ++ ++#define NETSEC_RX_PKT_BUF_LEN 1522 ++#define NETSEC_RX_JUMBO_PKT_BUF_LEN 9022 ++ ++#define NETSEC_NETDEV_TX_PKT_SCAT_NUM_MAX 19 ++ ++#define DESC_NUM 128 ++ ++#define NETSEC_TX_SHIFT_OWN_FIELD 31 ++#define NETSEC_TX_SHIFT_LD_FIELD 30 ++#define NETSEC_TX_SHIFT_DRID_FIELD 24 ++#define NETSEC_TX_SHIFT_PT_FIELD 21 ++#define NETSEC_TX_SHIFT_TDRID_FIELD 16 ++#define NETSEC_TX_SHIFT_CC_FIELD 15 ++#define NETSEC_TX_SHIFT_FS_FIELD 9 ++#define NETSEC_TX_LAST 8 ++#define NETSEC_TX_SHIFT_CO 7 ++#define NETSEC_TX_SHIFT_SO 6 ++#define NETSEC_TX_SHIFT_TRS_FIELD 4 ++ ++#define NETSEC_RX_PKT_OWN_FIELD 31 ++#define NETSEC_RX_PKT_LD_FIELD 30 ++#define NETSEC_RX_PKT_SDRID_FIELD 24 ++#define NETSEC_RX_PKT_FR_FIELD 23 ++#define NETSEC_RX_PKT_ER_FIELD 21 ++#define NETSEC_RX_PKT_ERR_FIELD 16 ++#define NETSEC_RX_PKT_TDRID_FIELD 12 ++#define NETSEC_RX_PKT_FS_FIELD 9 ++#define NETSEC_RX_PKT_LS_FIELD 8 ++#define NETSEC_RX_PKT_CO_FIELD 6 ++ ++#define NETSEC_RX_PKT_ERR_MASK 3 ++ ++#define NETSEC_MAX_TX_PKT_LEN 1518 ++#define NETSEC_MAX_TX_JUMBO_PKT_LEN 9018 ++ ++enum netsec_rings { ++ NETSEC_RING_TX, ++ NETSEC_RING_RX ++}; ++ ++#define NETSEC_RING_GMAC 15 ++#define NETSEC_RING_MAX 1 ++ ++#define NETSEC_TCP_SEG_LEN_MAX 1460 ++#define NETSEC_TCP_JUMBO_SEG_LEN_MAX 8960 ++ ++#define NETSEC_RX_CKSUM_NOTAVAIL 0 ++#define NETSEC_RX_CKSUM_OK 1 ++#define NETSEC_RX_CKSUM_NG 2 ++ ++#define NETSEC_TOP_IRQ_REG_CODE_LOAD_END BIT(20) ++#define NETSEC_IRQ_TRANSITION_COMPLETE BIT(4) ++#define NETSEC_IRQ_RX BIT(1) ++#define NETSEC_IRQ_TX BIT(0) ++ ++#define NETSEC_IRQ_EMPTY BIT(17) ++#define NETSEC_IRQ_ERR BIT(16) ++#define NETSEC_IRQ_PKT_CNT BIT(15) ++#define NETSEC_IRQ_TIMEUP BIT(14) ++#define NETSEC_IRQ_RCV (NETSEC_IRQ_PKT_CNT | \ ++ NETSEC_IRQ_TIMEUP) ++ ++#define NETSEC_IRQ_TX_DONE BIT(15) ++#define NETSEC_IRQ_SND (NETSEC_IRQ_TX_DONE | \ ++ NETSEC_IRQ_TIMEUP) ++ ++#define NETSEC_MODE_TRANS_COMP_IRQ_N2T BIT(20) ++#define NETSEC_MODE_TRANS_COMP_IRQ_T2N BIT(19) ++ ++#define NETSEC_DESC_MIN 2 ++#define NETSEC_DESC_MAX 2047 ++#define NETSEC_INT_PKTCNT_MAX 2047 ++ ++#define NETSEC_FLOW_START_TH_MAX 95 ++#define NETSEC_FLOW_STOP_TH_MAX 95 ++#define NETSEC_FLOW_PAUSE_TIME_MIN 5 ++ ++#define NETSEC_CLK_EN_REG_DOM_ALL 0x3f ++ ++#define NETSEC_REG_TOP_STATUS 0x80 ++#define NETSEC_REG_TOP_INTEN 0x81 ++#define NETSEC_REG_INTEN_SET 0x8d ++#define NETSEC_REG_INTEN_CLR 0x8e ++#define NETSEC_REG_NRM_TX_STATUS 0x100 ++#define NETSEC_REG_NRM_TX_INTEN 0x101 ++#define NETSEC_REG_NRM_TX_INTEN_SET 0x10a ++#define NETSEC_REG_NRM_TX_INTEN_CLR 0x10b ++#define NETSEC_REG_NRM_RX_STATUS 0x110 ++#define NETSEC_REG_NRM_RX_INTEN 0x111 ++#define NETSEC_REG_NRM_RX_INTEN_SET 0x11a ++#define NETSEC_REG_NRM_RX_INTEN_CLR 0x11b ++#define NETSEC_REG_RESERVED_RX_DESC_START 0x122 ++#define NETSEC_REG_RESERVED_TX_DESC_START 0x132 ++#define NETSEC_REG_CLK_EN 0x40 ++#define NETSEC_REG_SOFT_RST 0x41 ++#define NETSEC_REG_PKT_CMD_BUF 0x34 ++#define NETSEC_REG_PKT_CTRL 0x50 ++#define NETSEC_REG_COM_INIT 0x48 ++#define NETSEC_REG_DMA_TMR_CTRL 0x83 ++#define NETSEC_REG_F_TAIKI_MC_VER 0x8b ++#define NETSEC_REG_F_TAIKI_VER 0x8c ++#define NETSEC_REG_DMA_HM_CTRL 0x85 ++#define NETSEC_REG_DMA_MH_CTRL 0x88 ++#define NETSEC_REG_ADDR_DIS_CORE 0x86 ++#define NETSEC_REG_DMAC_HM_CMD_BUF 0x84 ++#define NETSEC_REG_DMAC_MH_CMD_BUF 0x87 ++#define NETSEC_REG_NRM_TX_PKTCNT 0x104 ++#define NETSEC_REG_NRM_TX_DONE_TXINT_PKTCNT 0x106 ++#define NETSEC_REG_NRM_RX_RXINT_PKTCNT 0x116 ++#define NETSEC_REG_NRM_TX_TXINT_TMR 0x108 ++#define NETSEC_REG_NRM_RX_RXINT_TMR 0x118 ++#define NETSEC_REG_NRM_TX_DONE_PKTCNT 0x105 ++#define NETSEC_REG_NRM_RX_PKTCNT 0x115 ++#define NETSEC_REG_NRM_TX_TMR 0x107 ++#define NETSEC_REG_NRM_RX_TMR 0x117 ++#define NETSEC_REG_NRM_TX_DESC_START_UP 0x10d ++#define NETSEC_REG_NRM_TX_DESC_START_LW 0x102 ++#define NETSEC_REG_NRM_RX_DESC_START_UP 0x11d ++#define NETSEC_REG_NRM_RX_DESC_START_LW 0x112 ++#define NETSEC_REG_NRM_TX_CONFIG 0x10c ++#define NETSEC_REG_NRM_RX_CONFIG 0x11c ++#define MAC_REG_DATA 0x470 ++#define MAC_REG_CMD 0x471 ++#define MAC_REG_FLOW_TH 0x473 ++#define MAC_REG_INTF_SEL 0x475 ++#define MAC_REG_DESC_INIT 0x47f ++#define MAC_REG_DESC_SOFT_RST 0x481 ++#define NETSEC_REG_MODE_TRANS_COMP_STATUS 0x140 ++#define GMAC_REG_MCR 0x0000 ++#define GMAC_REG_MFFR 0x0004 ++#define GMAC_REG_GAR 0x0010 ++#define GMAC_REG_GDR 0x0014 ++#define GMAC_REG_FCR 0x0018 ++#define GMAC_REG_BMR 0x1000 ++#define GMAC_REG_RDLAR 0x100c ++#define GMAC_REG_TDLAR 0x1010 ++#define GMAC_REG_OMR 0x1018 ++ ++#define NETSEC_PKT_CTRL_REG_MODE_NRM BIT(28) ++#define NETSEC_PKT_CTRL_REG_EN_JUMBO BIT(27) ++#define NETSEC_PKT_CTRL_REG_LOG_CHKSUM_ER BIT(3) ++#define NETSEC_PKT_CTRL_REG_LOG_HD_INCOMPLETE BIT(2) ++#define NETSEC_PKT_CTRL_REG_LOG_HD_ER BIT(1) ++#define NETSEC_PKT_CTRL_REG_DRP_NO_MATCH BIT(0) ++ ++#define NETSEC_CLK_EN_REG_DOM_G BIT(5) ++#define NETSEC_CLK_EN_REG_DOM_C BIT(1) ++#define NETSEC_CLK_EN_REG_DOM_D BIT(0) ++ ++#define NETSEC_COM_INIT_REG_DB BIT(2) ++#define NETSEC_COM_INIT_REG_CLS BIT(1) ++#define NETSEC_COM_INIT_REG_ALL (NETSEC_COM_INIT_REG_CLS | \ ++ NETSEC_COM_INIT_REG_DB) ++ ++#define NETSEC_SOFT_RST_REG_RESET 0 ++#define NETSEC_SOFT_RST_REG_RUN BIT(31) ++ ++#define NETSEC_DMA_CTRL_REG_STOP 1 ++#define MH_CTRL__MODE_TRANS BIT(20) ++ ++#define NETSEC_GMAC_CMD_ST_READ 0 ++#define NETSEC_GMAC_CMD_ST_WRITE BIT(28) ++#define NETSEC_GMAC_CMD_ST_BUSY BIT(31) ++ ++#define NETSEC_GMAC_BMR_REG_COMMON 0x00412080 ++#define NETSEC_GMAC_BMR_REG_RESET 0x00020181 ++#define NETSEC_GMAC_BMR_REG_SWR 0x00000001 ++ ++#define NETSEC_GMAC_OMR_REG_ST BIT(13) ++#define NETSEC_GMAC_OMR_REG_SR BIT(1) ++ ++#define NETSEC_GMAC_MCR_REG_IBN BIT(30) ++#define NETSEC_GMAC_MCR_REG_CST BIT(25) ++#define NETSEC_GMAC_MCR_REG_JE BIT(20) ++#define NETSEC_MCR_PS BIT(15) ++#define NETSEC_GMAC_MCR_REG_FES BIT(14) ++#define NETSEC_GMAC_MCR_REG_FULL_DUPLEX_COMMON 0x0000280c ++#define NETSEC_GMAC_MCR_REG_HALF_DUPLEX_COMMON 0x0001a00c ++ ++#define NETSEC_FCR_RFE BIT(2) ++#define NETSEC_FCR_TFE BIT(1) ++ ++#define NETSEC_GMAC_GAR_REG_GW BIT(1) ++#define NETSEC_GMAC_GAR_REG_GB BIT(0) ++ ++#define NETSEC_GMAC_GAR_REG_SHIFT_PA 11 ++#define NETSEC_GMAC_GAR_REG_SHIFT_GR 6 ++#define GMAC_REG_SHIFT_CR_GAR 2 ++ ++#define NETSEC_GMAC_GAR_REG_CR_25_35_MHZ 2 ++#define NETSEC_GMAC_GAR_REG_CR_35_60_MHZ 3 ++#define NETSEC_GMAC_GAR_REG_CR_60_100_MHZ 0 ++#define NETSEC_GMAC_GAR_REG_CR_100_150_MHZ 1 ++#define NETSEC_GMAC_GAR_REG_CR_150_250_MHZ 4 ++#define NETSEC_GMAC_GAR_REG_CR_250_300_MHZ 5 ++ ++#define NETSEC_GMAC_RDLAR_REG_COMMON 0x18000 ++#define NETSEC_GMAC_TDLAR_REG_COMMON 0x1c000 ++ ++#define NETSEC_REG_NETSEC_VER_F_TAIKI 0x50000 ++ ++#define NETSEC_REG_DESC_RING_CONFIG_CFG_UP BIT(31) ++#define NETSEC_REG_DESC_RING_CONFIG_CH_RST BIT(30) ++#define NETSEC_REG_DESC_TMR_MODE 4 ++#define NETSEC_REG_DESC_ENDIAN 0 ++ ++#define NETSEC_MAC_DESC_SOFT_RST_SOFT_RST 1 ++#define NETSEC_MAC_DESC_INIT_REG_INIT 1 ++ ++#define NETSEC_EEPROM_MAC_ADDRESS 0x00 ++#define NETSEC_EEPROM_HM_ME_ADDRESS_H 0x08 ++#define NETSEC_EEPROM_HM_ME_ADDRESS_L 0x0C ++#define NETSEC_EEPROM_HM_ME_SIZE 0x10 ++#define NETSEC_EEPROM_MH_ME_ADDRESS_H 0x14 ++#define NETSEC_EEPROM_MH_ME_ADDRESS_L 0x18 ++#define NETSEC_EEPROM_MH_ME_SIZE 0x1C ++#define NETSEC_EEPROM_PKT_ME_ADDRESS 0x20 ++#define NETSEC_EEPROM_PKT_ME_SIZE 0x24 ++ ++/* this is used to interpret a register layout */ ++struct netsec_pkt_ctrlaram { ++ u8 log_chksum_er_flag:1; ++ u8 log_hd_imcomplete_flag:1; ++ u8 log_hd_er_flag:1; ++}; ++ ++struct netsec_param { ++ struct netsec_pkt_ctrlaram pkt_ctrlaram; ++ bool use_jumbo_pkt_flag; ++}; ++ ++struct netsec_mac_mode { ++ u16 flow_start_th; ++ u16 flow_stop_th; ++ u16 pause_time; ++ bool flow_ctrl_enable_flag; ++}; ++ ++struct netsec_desc_ring { ++ spinlock_t spinlock_desc; /* protect descriptor access */ ++ phys_addr_t desc_phys; ++ struct netsec_frag_info *frag; ++ struct sk_buff **priv; ++ void *ring_vaddr; ++ enum netsec_rings id; ++ int len; ++ u16 tx_done_num; ++ u16 rx_num; ++ u16 head; ++ u16 tail; ++ bool running; ++ bool full; ++}; ++ ++struct netsec_frag_info { ++ dma_addr_t dma_addr; ++ void *addr; ++ u16 len; ++}; ++ ++struct netsec_priv { ++ struct netsec_desc_ring desc_ring[NETSEC_RING_MAX + 1]; ++ struct ethtool_coalesce et_coalesce; ++ struct netsec_mac_mode mac_mode; ++ struct netsec_param param; ++ struct napi_struct napi; ++ phy_interface_t phy_interface; ++ spinlock_t tx_queue_lock; /* protect transmit queue */ ++ struct netsec_frag_info tx_info[MAX_SKB_FRAGS]; ++ struct net_device *ndev; ++ struct device_node *phy_np; ++ struct phy_device *phydev; ++ struct mii_bus *mii_bus; ++ void __iomem *ioaddr; ++ const void *eeprom_base; ++ struct device *dev; ++ struct clk *clk[3]; ++ u32 rx_pkt_buf_len; ++ u32 msg_enable; ++ u32 freq; ++ int actual_link_speed; ++ int clock_count; ++ bool rx_cksum_offload_flag; ++ bool actual_duplex; ++ bool irq_registered; ++}; ++ ++struct netsec_tx_de { ++ u32 attr; ++ u32 data_buf_addr_up; ++ u32 data_buf_addr_lw; ++ u32 buf_len_info; ++}; ++ ++struct netsec_rx_de { ++ u32 attr; ++ u32 data_buf_addr_up; ++ u32 data_buf_addr_lw; ++ u32 buf_len_info; ++}; ++ ++struct netsec_tx_pkt_ctrl { ++ u16 tcp_seg_len; ++ bool tcp_seg_offload_flag; ++ bool cksum_offload_flag; ++}; ++ ++struct netsec_rx_pkt_info { ++ int rx_cksum_result; ++ int err_code; ++ bool is_fragmented; ++ bool err_flag; ++}; ++ ++struct netsec_skb_cb { ++ bool is_rx; ++}; ++ ++static inline void netsec_writel(struct netsec_priv *priv, ++ u32 reg_addr, u32 val) ++{ ++ writel_relaxed(val, priv->ioaddr + (reg_addr << 2)); ++} ++ ++static inline u32 netsec_readl(struct netsec_priv *priv, u32 reg_addr) ++{ ++ return readl_relaxed(priv->ioaddr + (reg_addr << 2)); ++} ++ ++static inline void netsec_mark_skb_type(struct sk_buff *skb, bool is_rx) ++{ ++ struct netsec_skb_cb *cb = (struct netsec_skb_cb *)skb->cb; ++ ++ cb->is_rx = is_rx; ++} ++ ++static inline bool skb_is_rx(struct sk_buff *skb) ++{ ++ struct netsec_skb_cb *cb = (struct netsec_skb_cb *)skb->cb; ++ ++ return cb->is_rx; ++} ++ ++extern const struct net_device_ops netsec_netdev_ops; ++extern const struct ethtool_ops netsec_ethtool_ops; ++ ++int netsec_start_gmac(struct netsec_priv *priv); ++int netsec_stop_gmac(struct netsec_priv *priv); ++int netsec_mii_register(struct netsec_priv *priv); ++void netsec_mii_unregister(struct netsec_priv *priv); ++int netsec_start_desc_ring(struct netsec_priv *priv, enum netsec_rings id); ++void netsec_stop_desc_ring(struct netsec_priv *priv, enum netsec_rings id); ++u16 netsec_get_rx_num(struct netsec_priv *priv); ++u16 netsec_get_tx_avail_num(struct netsec_priv *priv); ++int netsec_clean_tx_desc_ring(struct netsec_priv *priv); ++int netsec_clean_rx_desc_ring(struct netsec_priv *priv); ++int netsec_set_tx_pkt_data(struct netsec_priv *priv, ++ const struct netsec_tx_pkt_ctrl *tx_ctrl, ++ u8 count_frags, const struct netsec_frag_info *info, ++ struct sk_buff *skb); ++int netsec_get_rx_pkt_data(struct netsec_priv *priv, ++ struct netsec_rx_pkt_info *rxpi, ++ struct netsec_frag_info *frag, u16 *len, ++ struct sk_buff **skb); ++void netsec_ring_irq_enable(struct netsec_priv *priv, ++ enum netsec_rings id, u32 i); ++void netsec_ring_irq_disable(struct netsec_priv *priv, ++ enum netsec_rings id, u32 i); ++int netsec_alloc_desc_ring(struct netsec_priv *priv, enum netsec_rings id); ++void netsec_free_desc_ring(struct netsec_priv *priv, ++ struct netsec_desc_ring *desc); ++int netsec_setup_rx_desc(struct netsec_priv *priv, ++ struct netsec_desc_ring *desc); ++int netsec_netdev_napi_poll(struct napi_struct *napi_p, int budget); ++ ++#endif /* NETSEC_INTERNAL_H */ +diff --git a/drivers/net/ethernet/socionext/netsec/netsec_desc_ring_access.c b/drivers/net/ethernet/socionext/netsec/netsec_desc_ring_access.c +new file mode 100644 +index 0000000..a4e56cd +--- /dev/null ++++ b/drivers/net/ethernet/socionext/netsec/netsec_desc_ring_access.c +@@ -0,0 +1,623 @@ ++/** ++ * drivers/net/ethernet/socionext/netsec/netsec_desc_ring_access.c ++ * ++ * Copyright (C) 2013-2014 Fujitsu Semiconductor Limited. ++ * Copyright (C) 2014-2017 Linaro Ltd. All rights reserved. ++ * Andy Green <andy.green@linaro.org> ++ * Jassi Brar <jaswinder.singh@linaro.org> ++ * Ard Biesheuvel <ard.biesheuvel@linaro.org> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ */ ++ ++#include <linux/spinlock.h> ++#include <linux/dma-mapping.h> ++ ++#include "netsec.h" ++ ++static const u32 ads_irq_set[] = { ++ NETSEC_REG_NRM_TX_INTEN_SET, ++ NETSEC_REG_NRM_RX_INTEN_SET, ++}; ++ ++static const u32 desc_ring_irq_inten_clr_reg_addr[] = { ++ NETSEC_REG_NRM_TX_INTEN_CLR, ++ NETSEC_REG_NRM_RX_INTEN_CLR, ++}; ++ ++static const u32 int_tmr_reg_addr[] = { ++ NETSEC_REG_NRM_TX_TXINT_TMR, ++ NETSEC_REG_NRM_RX_RXINT_TMR, ++}; ++ ++static const u32 rx_pkt_cnt_reg_addr[] = { ++ 0, ++ NETSEC_REG_NRM_RX_PKTCNT, ++}; ++ ++static const u32 tx_pkt_cnt_reg_addr[] = { ++ NETSEC_REG_NRM_TX_PKTCNT, ++ 0, ++}; ++ ++static const u32 int_pkt_cnt_reg_addr[] = { ++ NETSEC_REG_NRM_TX_DONE_TXINT_PKTCNT, ++ NETSEC_REG_NRM_RX_RXINT_PKTCNT, ++}; ++ ++static const u32 tx_done_pkt_addr[] = { ++ NETSEC_REG_NRM_TX_DONE_PKTCNT, ++ 0, ++}; ++ ++static const u32 netsec_desc_mask[] = { ++ [NETSEC_RING_TX] = NETSEC_GMAC_OMR_REG_ST, ++ [NETSEC_RING_RX] = NETSEC_GMAC_OMR_REG_SR ++}; ++ ++void netsec_ring_irq_enable(struct netsec_priv *priv, ++ enum netsec_rings id, u32 irqf) ++{ ++ netsec_writel(priv, ads_irq_set[id], irqf); ++} ++ ++void netsec_ring_irq_disable(struct netsec_priv *priv, ++ enum netsec_rings id, u32 irqf) ++{ ++ netsec_writel(priv, desc_ring_irq_inten_clr_reg_addr[id], irqf); ++} ++ ++static struct sk_buff *alloc_rx_pkt_buf(struct netsec_priv *priv, ++ struct netsec_frag_info *info) ++{ ++ struct sk_buff *skb; ++ ++ if (device_get_dma_attr(priv->dev) == DEV_DMA_COHERENT) { ++ skb = netdev_alloc_skb_ip_align(priv->ndev, info->len); ++ } else { ++ info->len = L1_CACHE_ALIGN(info->len); ++ skb = netdev_alloc_skb(priv->ndev, info->len); ++ } ++ if (!skb) ++ return NULL; ++ ++ netsec_mark_skb_type(skb, NETSEC_RING_RX); ++ info->addr = skb->data; ++ info->dma_addr = dma_map_single(priv->dev, info->addr, info->len, ++ DMA_FROM_DEVICE); ++ if (dma_mapping_error(priv->dev, info->dma_addr)) { ++ dev_kfree_skb(skb); ++ return NULL; ++ } ++ return skb; ++} ++ ++int netsec_alloc_desc_ring(struct netsec_priv *priv, enum netsec_rings id) ++{ ++ struct netsec_desc_ring *desc = &priv->desc_ring[id]; ++ int ret = 0; ++ ++ desc->id = id; ++ desc->len = sizeof(struct netsec_tx_de); /* rx and tx desc same size */ ++ ++ spin_lock_init(&desc->spinlock_desc); ++ ++ desc->ring_vaddr = dma_zalloc_coherent(priv->dev, desc->len * DESC_NUM, ++ &desc->desc_phys, GFP_KERNEL); ++ if (!desc->ring_vaddr) { ++ ret = -ENOMEM; ++ goto err; ++ } ++ ++ desc->frag = kcalloc(DESC_NUM, sizeof(*desc->frag), GFP_KERNEL); ++ if (!desc->frag) { ++ ret = -ENOMEM; ++ goto err; ++ } ++ ++ desc->priv = kcalloc(DESC_NUM, sizeof(struct sk_buff *), GFP_KERNEL); ++ if (!desc->priv) { ++ ret = -ENOMEM; ++ goto err; ++ } ++ ++ return 0; ++ ++err: ++ netsec_free_desc_ring(priv, desc); ++ ++ return ret; ++} ++ ++static void netsec_uninit_pkt_desc_ring(struct netsec_priv *priv, ++ struct netsec_desc_ring *desc) ++{ ++ struct netsec_frag_info *frag; ++ u32 status; ++ u16 idx; ++ ++ for (idx = 0; idx < DESC_NUM; idx++) { ++ frag = &desc->frag[idx]; ++ if (!frag->addr) ++ continue; ++ ++ status = *(u32 *)(desc->ring_vaddr + desc->len * idx); ++ ++ dma_unmap_single(priv->dev, frag->dma_addr, frag->len, ++ skb_is_rx(desc->priv[idx]) ? DMA_FROM_DEVICE : ++ DMA_TO_DEVICE); ++ if ((status >> NETSEC_TX_LAST) & 1) ++ dev_kfree_skb(desc->priv[idx]); ++ } ++ ++ memset(desc->frag, 0, sizeof(struct netsec_frag_info) * DESC_NUM); ++ memset(desc->priv, 0, sizeof(struct sk_buff *) * DESC_NUM); ++ memset(desc->ring_vaddr, 0, desc->len * DESC_NUM); ++} ++ ++void netsec_free_desc_ring(struct netsec_priv *priv, ++ struct netsec_desc_ring *desc) ++{ ++ if (desc->ring_vaddr && desc->frag && desc->priv) ++ netsec_uninit_pkt_desc_ring(priv, desc); ++ ++ if (desc->ring_vaddr) { ++ dma_free_coherent(priv->dev, desc->len * DESC_NUM, ++ desc->ring_vaddr, desc->desc_phys); ++ desc->ring_vaddr = NULL; ++ } ++ kfree(desc->frag); ++ desc->frag = NULL; ++ kfree(desc->priv); ++ desc->priv = NULL; ++} ++ ++static void netsec_set_rx_de(struct netsec_priv *priv, ++ struct netsec_desc_ring *desc, u16 idx, ++ const struct netsec_frag_info *info, ++ struct sk_buff *skb) ++{ ++ struct netsec_rx_de *de = desc->ring_vaddr + desc->len * idx; ++ u32 attr = (1 << NETSEC_RX_PKT_OWN_FIELD) | ++ (1 << NETSEC_RX_PKT_FS_FIELD) | ++ (1 << NETSEC_RX_PKT_LS_FIELD); ++ ++ if (idx == DESC_NUM - 1) ++ attr |= (1 << NETSEC_RX_PKT_LD_FIELD); ++ ++ de->data_buf_addr_up = upper_32_bits(info->dma_addr); ++ de->data_buf_addr_lw = lower_32_bits(info->dma_addr); ++ de->buf_len_info = info->len; ++ /* desc->attr makes the descriptor live, so it must be physically ++ * written last after the rest of the descriptor body is already there ++ */ ++ dma_wmb(); ++ de->attr = attr; ++ ++ desc->frag[idx].dma_addr = info->dma_addr; ++ desc->frag[idx].addr = info->addr; ++ desc->frag[idx].len = info->len; ++ ++ desc->priv[idx] = skb; ++} ++ ++int netsec_setup_rx_desc(struct netsec_priv *priv, ++ struct netsec_desc_ring *desc) ++{ ++ struct netsec_frag_info info; ++ struct sk_buff *skb; ++ int n; ++ ++ info.len = priv->rx_pkt_buf_len; ++ ++ for (n = 0; n < DESC_NUM; n++) { ++ skb = alloc_rx_pkt_buf(priv, &info); ++ if (!skb) { ++ netsec_uninit_pkt_desc_ring(priv, desc); ++ return -ENOMEM; ++ } ++ netsec_set_rx_de(priv, desc, n, &info, skb); ++ } ++ ++ return 0; ++} ++ ++static void netsec_set_tx_desc_entry(struct netsec_priv *priv, ++ struct netsec_desc_ring *desc, ++ const struct netsec_tx_pkt_ctrl *tx_ctrl, ++ bool first_flag, bool last_flag, ++ const struct netsec_frag_info *frag, ++ struct sk_buff *skb) ++{ ++ struct netsec_tx_de *tx_desc_entry; ++ int idx = desc->head; ++ u32 attr; ++ ++ tx_desc_entry = desc->ring_vaddr + (desc->len * idx); ++ ++ attr = (1 << NETSEC_TX_SHIFT_OWN_FIELD) | ++ (desc->id << NETSEC_TX_SHIFT_DRID_FIELD) | ++ (1 << NETSEC_TX_SHIFT_PT_FIELD) | ++ (NETSEC_RING_GMAC << NETSEC_TX_SHIFT_TDRID_FIELD) | ++ (first_flag << NETSEC_TX_SHIFT_FS_FIELD) | ++ (last_flag << NETSEC_TX_LAST) | ++ (tx_ctrl->cksum_offload_flag << NETSEC_TX_SHIFT_CO) | ++ (tx_ctrl->tcp_seg_offload_flag << NETSEC_TX_SHIFT_SO) | ++ (1 << NETSEC_TX_SHIFT_TRS_FIELD); ++ if (idx == DESC_NUM - 1) ++ attr |= (1 << NETSEC_TX_SHIFT_LD_FIELD); ++ ++ tx_desc_entry->data_buf_addr_up = upper_32_bits(frag->dma_addr); ++ tx_desc_entry->data_buf_addr_lw = lower_32_bits(frag->dma_addr); ++ tx_desc_entry->buf_len_info = (tx_ctrl->tcp_seg_len << 16) | frag->len; ++ /* desc->attr makes the descriptor live, so it must be physically ++ * written last after the rest of the descriptor body is already there ++ */ ++ dma_wmb(); ++ tx_desc_entry->attr = attr; ++ ++ desc->frag[idx] = *frag; ++ desc->priv[idx] = skb; ++} ++ ++static void netsec_get_rx_de(struct netsec_priv *priv, ++ struct netsec_desc_ring *desc, u16 idx, ++ struct netsec_rx_pkt_info *rxpi, ++ struct netsec_frag_info *frag, u16 *len, ++ struct sk_buff **skb) ++{ ++ struct netsec_rx_de de = {}; ++ ++ *rxpi = (struct netsec_rx_pkt_info){}; ++ memcpy(&de, desc->ring_vaddr + desc->len * idx, desc->len); ++ ++ dev_dbg(priv->dev, "%08x\n", *(u32 *)&de); ++ *len = de.buf_len_info >> 16; ++ ++ rxpi->is_fragmented = (de.attr >> NETSEC_RX_PKT_FR_FIELD) & 1; ++ rxpi->err_flag = (de.attr >> NETSEC_RX_PKT_ER_FIELD) & 1; ++ rxpi->rx_cksum_result = (de.attr >> NETSEC_RX_PKT_CO_FIELD) & 3; ++ rxpi->err_code = (de.attr >> NETSEC_RX_PKT_ERR_FIELD) & ++ NETSEC_RX_PKT_ERR_MASK; ++ *frag = desc->frag[idx]; ++ *skb = desc->priv[idx]; ++} ++ ++static void netsec_inc_desc_head_idx(struct netsec_priv *priv, ++ struct netsec_desc_ring *desc, u16 inc) ++{ ++ u32 sum; ++ ++ sum = desc->head + inc; ++ ++ if (sum >= DESC_NUM) ++ sum -= DESC_NUM; ++ ++ desc->head = sum; ++ desc->full = desc->head == desc->tail; ++} ++ ++static void netsec_inc_desc_tail_idx(struct netsec_priv *priv, ++ struct netsec_desc_ring *desc) ++{ ++ u32 sum; ++ ++ sum = desc->tail + 1; ++ ++ if (sum >= DESC_NUM) ++ sum -= DESC_NUM; ++ ++ desc->tail = sum; ++ desc->full = false; ++} ++ ++static u16 netsec_get_tx_avail_num_sub(struct netsec_priv *priv, ++ const struct netsec_desc_ring *desc) ++{ ++ if (desc->full) ++ return 0; ++ ++ if (desc->tail > desc->head) ++ return desc->tail - desc->head; ++ ++ return DESC_NUM + desc->tail - desc->head; ++} ++ ++static u16 netsec_get_tx_done_num_sub(struct netsec_priv *priv, ++ struct netsec_desc_ring *desc) ++{ ++ desc->tx_done_num += netsec_readl(priv, tx_done_pkt_addr[desc->id]); ++ ++ return desc->tx_done_num; ++} ++ ++static int netsec_set_irq_coalesce_param(struct netsec_priv *priv, ++ enum netsec_rings id) ++{ ++ int max_frames, tmr; ++ ++ switch (id) { ++ case NETSEC_RING_TX: ++ max_frames = priv->et_coalesce.tx_max_coalesced_frames; ++ tmr = priv->et_coalesce.tx_coalesce_usecs; ++ break; ++ case NETSEC_RING_RX: ++ max_frames = priv->et_coalesce.rx_max_coalesced_frames; ++ tmr = priv->et_coalesce.rx_coalesce_usecs; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ netsec_writel(priv, int_pkt_cnt_reg_addr[id], max_frames); ++ netsec_writel(priv, int_tmr_reg_addr[id], ((tmr != 0) << 31) | tmr); ++ ++ return 0; ++} ++ ++int netsec_start_desc_ring(struct netsec_priv *priv, enum netsec_rings id) ++{ ++ struct netsec_desc_ring *desc = &priv->desc_ring[id]; ++ int ret = 0; ++ ++ spin_lock_bh(&desc->spinlock_desc); ++ ++ if (desc->running) { ++ ret = -EBUSY; ++ goto err; ++ } ++ ++ switch (desc->id) { ++ case NETSEC_RING_RX: ++ netsec_writel(priv, ads_irq_set[id], NETSEC_IRQ_RCV); ++ break; ++ case NETSEC_RING_TX: ++ netsec_writel(priv, ads_irq_set[id], NETSEC_IRQ_EMPTY); ++ break; ++ } ++ ++ netsec_set_irq_coalesce_param(priv, desc->id); ++ desc->running = true; ++ ++err: ++ spin_unlock_bh(&desc->spinlock_desc); ++ ++ return ret; ++} ++ ++void netsec_stop_desc_ring(struct netsec_priv *priv, enum netsec_rings id) ++{ ++ struct netsec_desc_ring *desc = &priv->desc_ring[id]; ++ ++ spin_lock_bh(&desc->spinlock_desc); ++ if (desc->running) ++ netsec_writel(priv, desc_ring_irq_inten_clr_reg_addr[id], ++ NETSEC_IRQ_RCV | NETSEC_IRQ_EMPTY | ++ NETSEC_IRQ_SND); ++ ++ desc->running = false; ++ spin_unlock_bh(&desc->spinlock_desc); ++} ++ ++u16 netsec_get_rx_num(struct netsec_priv *priv) ++{ ++ struct netsec_desc_ring *desc = &priv->desc_ring[NETSEC_RING_RX]; ++ u32 result; ++ ++ spin_lock(&desc->spinlock_desc); ++ if (desc->running) { ++ result = netsec_readl(priv, ++ rx_pkt_cnt_reg_addr[NETSEC_RING_RX]); ++ desc->rx_num += result; ++ if (result) ++ netsec_inc_desc_head_idx(priv, desc, result); ++ } ++ spin_unlock(&desc->spinlock_desc); ++ ++ return desc->rx_num; ++} ++ ++u16 netsec_get_tx_avail_num(struct netsec_priv *priv) ++{ ++ struct netsec_desc_ring *desc = &priv->desc_ring[NETSEC_RING_TX]; ++ u16 result; ++ ++ spin_lock(&desc->spinlock_desc); ++ ++ if (!desc->running) { ++ netif_err(priv, drv, priv->ndev, ++ "%s: not running tx desc\n", __func__); ++ result = 0; ++ goto err; ++ } ++ ++ result = netsec_get_tx_avail_num_sub(priv, desc); ++ ++err: ++ spin_unlock(&desc->spinlock_desc); ++ ++ return result; ++} ++ ++int netsec_clean_tx_desc_ring(struct netsec_priv *priv) ++{ ++ struct netsec_desc_ring *desc = &priv->desc_ring[NETSEC_RING_TX]; ++ unsigned int pkts = 0, bytes = 0; ++ struct netsec_frag_info *frag; ++ struct netsec_tx_de *entry; ++ bool is_last; ++ ++ spin_lock(&desc->spinlock_desc); ++ ++ netsec_get_tx_done_num_sub(priv, desc); ++ ++ while ((desc->tail != desc->head || desc->full) && desc->tx_done_num) { ++ frag = &desc->frag[desc->tail]; ++ entry = desc->ring_vaddr + desc->len * desc->tail; ++ is_last = (entry->attr >> NETSEC_TX_LAST) & 1; ++ ++ dma_unmap_single(priv->dev, frag->dma_addr, frag->len, ++ DMA_TO_DEVICE); ++ if (is_last) { ++ pkts++; ++ bytes += desc->priv[desc->tail]->len; ++ dev_kfree_skb(desc->priv[desc->tail]); ++ } ++ *frag = (struct netsec_frag_info){}; ++ netsec_inc_desc_tail_idx(priv, desc); ++ ++ if (is_last) ++ desc->tx_done_num--; ++ } ++ ++ spin_unlock(&desc->spinlock_desc); ++ ++ priv->ndev->stats.tx_packets += pkts; ++ priv->ndev->stats.tx_bytes += bytes; ++ ++ netdev_completed_queue(priv->ndev, pkts, bytes); ++ ++ return 0; ++} ++ ++int netsec_clean_rx_desc_ring(struct netsec_priv *priv) ++{ ++ struct netsec_desc_ring *desc = &priv->desc_ring[NETSEC_RING_RX]; ++ ++ spin_lock(&desc->spinlock_desc); ++ ++ while (desc->full || (desc->tail != desc->head)) { ++ netsec_set_rx_de(priv, desc, desc->tail, ++ &desc->frag[desc->tail], ++ desc->priv[desc->tail]); ++ desc->rx_num--; ++ netsec_inc_desc_tail_idx(priv, desc); ++ } ++ ++ spin_unlock(&desc->spinlock_desc); ++ ++ return 0; ++} ++ ++int netsec_set_tx_pkt_data(struct netsec_priv *priv, ++ const struct netsec_tx_pkt_ctrl *tx_ctrl, ++ u8 count_frags, const struct netsec_frag_info *info, ++ struct sk_buff *skb) ++{ ++ struct netsec_desc_ring *desc; ++ u32 sum_len = 0; ++ unsigned int i; ++ int ret = 0; ++ ++ if (tx_ctrl->tcp_seg_offload_flag && !tx_ctrl->cksum_offload_flag) ++ return -EINVAL; ++ ++ if (tx_ctrl->tcp_seg_offload_flag) { ++ if (tx_ctrl->tcp_seg_len == 0) ++ return -EINVAL; ++ ++ if (priv->param.use_jumbo_pkt_flag) { ++ if (tx_ctrl->tcp_seg_len > NETSEC_TCP_JUMBO_SEG_LEN_MAX) ++ return -EINVAL; ++ } else { ++ if (tx_ctrl->tcp_seg_len > NETSEC_TCP_SEG_LEN_MAX) ++ return -EINVAL; ++ } ++ } else { ++ if (tx_ctrl->tcp_seg_len) ++ return -EINVAL; ++ } ++ ++ if (!count_frags) ++ return -ERANGE; ++ ++ for (i = 0; i < count_frags; i++) { ++ if ((info[i].len == 0) || (info[i].len > 0xffff)) { ++ netif_err(priv, drv, priv->ndev, ++ "%s: bad info len\n", __func__); ++ return -EINVAL; ++ } ++ sum_len += info[i].len; ++ } ++ ++ if (!tx_ctrl->tcp_seg_offload_flag) { ++ if (priv->param.use_jumbo_pkt_flag) { ++ if (sum_len > NETSEC_MAX_TX_JUMBO_PKT_LEN) ++ return -EINVAL; ++ } else { ++ if (sum_len > NETSEC_MAX_TX_PKT_LEN) ++ return -EINVAL; ++ } ++ } ++ ++ desc = &priv->desc_ring[NETSEC_RING_TX]; ++ spin_lock(&desc->spinlock_desc); ++ ++ if (!desc->running) { ++ ret = -ENODEV; ++ goto end; ++ } ++ ++ dma_rmb(); /* we need to see a consistent view of pending tx count */ ++ if (count_frags > netsec_get_tx_avail_num_sub(priv, desc)) { ++ ret = -EBUSY; ++ goto end; ++ } ++ ++ for (i = 0; i < count_frags; i++) { ++ netsec_set_tx_desc_entry(priv, desc, tx_ctrl, i == 0, ++ i == count_frags - 1, &info[i], skb); ++ netsec_inc_desc_head_idx(priv, desc, 1); ++ } ++ ++ dma_wmb(); /* ensure the descriptor is flushed */ ++ netsec_writel(priv, tx_pkt_cnt_reg_addr[NETSEC_RING_TX], 1); ++ ++end: ++ spin_unlock(&desc->spinlock_desc); ++ ++ return ret; ++} ++ ++int netsec_get_rx_pkt_data(struct netsec_priv *priv, ++ struct netsec_rx_pkt_info *rxpi, ++ struct netsec_frag_info *frag, u16 *len, ++ struct sk_buff **skb) ++{ ++ struct netsec_desc_ring *desc = &priv->desc_ring[NETSEC_RING_RX]; ++ struct netsec_frag_info info; ++ struct sk_buff *tmp_skb; ++ int ret = 0; ++ ++ spin_lock(&desc->spinlock_desc); ++ ++ if (desc->rx_num == 0) { ++ dev_err(priv->dev, "%s 0 len rx\n", __func__); ++ ret = -EINVAL; ++ goto err; ++ } ++ ++ info.len = priv->rx_pkt_buf_len; ++ dma_rmb(); /* we need to ensure we only see current data in descriptor */ ++ tmp_skb = alloc_rx_pkt_buf(priv, &info); ++ if (!tmp_skb) { ++ netsec_set_rx_de(priv, desc, desc->tail, ++ &desc->frag[desc->tail], ++ desc->priv[desc->tail]); ++ ret = -ENOMEM; ++ } else { ++ netsec_get_rx_de(priv, desc, desc->tail, rxpi, frag, len, skb); ++ netsec_set_rx_de(priv, desc, desc->tail, &info, tmp_skb); ++ } ++ ++ netsec_inc_desc_tail_idx(priv, desc); ++ desc->rx_num--; ++ ++err: ++ spin_unlock(&desc->spinlock_desc); ++ ++ return ret; ++} +diff --git a/drivers/net/ethernet/socionext/netsec/netsec_ethtool.c b/drivers/net/ethernet/socionext/netsec/netsec_ethtool.c +new file mode 100644 +index 0000000..45830fe +--- /dev/null ++++ b/drivers/net/ethernet/socionext/netsec/netsec_ethtool.c +@@ -0,0 +1,78 @@ ++/** ++ * drivers/net/ethernet/socionext/netsec/netsec_ethtool.c ++ * ++ * Copyright (C) 2013-2014 Fujitsu Semiconductor Limited. ++ * Copyright (C) 2014-2017 Linaro Ltd. All rights reserved. ++ * Andy Green <andy.green@linaro.org> ++ * Jassi Brar <jaswinder.singh@linaro.org> ++ * Ard Biesheuvel <ard.biesheuvel@linaro.org> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ */ ++ ++#include "netsec.h" ++ ++static void netsec_et_get_drvinfo(struct net_device *net_device, ++ struct ethtool_drvinfo *info) ++{ ++ strlcpy(info->driver, "netsec", sizeof(info->driver)); ++ strlcpy(info->bus_info, dev_name(net_device->dev.parent), ++ sizeof(info->bus_info)); ++} ++ ++static int netsec_et_get_coalesce(struct net_device *net_device, ++ struct ethtool_coalesce *et_coalesce) ++{ ++ struct netsec_priv *priv = netdev_priv(net_device); ++ ++ *et_coalesce = priv->et_coalesce; ++ ++ return 0; ++} ++ ++static int netsec_et_set_coalesce(struct net_device *net_device, ++ struct ethtool_coalesce *et_coalesce) ++{ ++ struct netsec_priv *priv = netdev_priv(net_device); ++ ++ if (et_coalesce->rx_max_coalesced_frames > NETSEC_INT_PKTCNT_MAX) ++ return -EINVAL; ++ if (et_coalesce->tx_max_coalesced_frames > NETSEC_INT_PKTCNT_MAX) ++ return -EINVAL; ++ if (!et_coalesce->rx_max_coalesced_frames) ++ return -EINVAL; ++ if (!et_coalesce->tx_max_coalesced_frames) ++ return -EINVAL; ++ ++ priv->et_coalesce = *et_coalesce; ++ ++ return 0; ++} ++ ++static u32 netsec_et_get_msglevel(struct net_device *dev) ++{ ++ struct netsec_priv *priv = netdev_priv(dev); ++ ++ return priv->msg_enable; ++} ++ ++static void netsec_et_set_msglevel(struct net_device *dev, u32 datum) ++{ ++ struct netsec_priv *priv = netdev_priv(dev); ++ ++ priv->msg_enable = datum; ++} ++ ++const struct ethtool_ops netsec_ethtool_ops = { ++ .get_drvinfo = netsec_et_get_drvinfo, ++ .get_link_ksettings = phy_ethtool_get_link_ksettings, ++ .set_link_ksettings = phy_ethtool_set_link_ksettings, ++ .get_link = ethtool_op_get_link, ++ .get_coalesce = netsec_et_get_coalesce, ++ .set_coalesce = netsec_et_set_coalesce, ++ .get_msglevel = netsec_et_get_msglevel, ++ .set_msglevel = netsec_et_set_msglevel, ++}; +diff --git a/drivers/net/ethernet/socionext/netsec/netsec_gmac_access.c b/drivers/net/ethernet/socionext/netsec/netsec_gmac_access.c +new file mode 100644 +index 0000000..94e9b7f +--- /dev/null ++++ b/drivers/net/ethernet/socionext/netsec/netsec_gmac_access.c +@@ -0,0 +1,330 @@ ++/** ++ * drivers/net/ethernet/socionext/netsec/netsec_gmac_access.c ++ * ++ * Copyright (C) 2013-2014 Fujitsu Semiconductor Limited. ++ * Copyright (C) 2014-2017 Linaro Ltd. All rights reserved. ++ * Andy Green <andy.green@linaro.org> ++ * Jassi Brar <jaswinder.singh@linaro.org> ++ * Ard Biesheuvel <ard.biesheuvel@linaro.org> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ */ ++#include "netsec.h" ++ ++#define TIMEOUT_SPINS_MAC 1000 ++#define TIMEOUT_SECONDARY_MS_MAC 100 ++ ++static u32 netsec_clk_type(u32 freq) ++{ ++ if (freq < 35 * NETSEC_CLK_MHZ) ++ return NETSEC_GMAC_GAR_REG_CR_25_35_MHZ; ++ if (freq < 60 * NETSEC_CLK_MHZ) ++ return NETSEC_GMAC_GAR_REG_CR_35_60_MHZ; ++ if (freq < 100 * NETSEC_CLK_MHZ) ++ return NETSEC_GMAC_GAR_REG_CR_60_100_MHZ; ++ if (freq < 150 * NETSEC_CLK_MHZ) ++ return NETSEC_GMAC_GAR_REG_CR_100_150_MHZ; ++ if (freq < 250 * NETSEC_CLK_MHZ) ++ return NETSEC_GMAC_GAR_REG_CR_150_250_MHZ; ++ ++ return NETSEC_GMAC_GAR_REG_CR_250_300_MHZ; ++} ++ ++static int netsec_wait_while_busy(struct netsec_priv *priv, u32 addr, u32 mask) ++{ ++ u32 timeout = TIMEOUT_SPINS_MAC; ++ ++ while (--timeout && netsec_readl(priv, addr) & mask) ++ cpu_relax(); ++ if (timeout) ++ return 0; ++ ++ timeout = TIMEOUT_SECONDARY_MS_MAC; ++ while (--timeout && netsec_readl(priv, addr) & mask) ++ usleep_range(1000, 2000); ++ ++ if (timeout) ++ return 0; ++ ++ netdev_WARN(priv->ndev, "%s: timeout\n", __func__); ++ ++ return -ETIMEDOUT; ++} ++ ++static int netsec_mac_write(struct netsec_priv *priv, u32 addr, u32 value) ++{ ++ netsec_writel(priv, MAC_REG_DATA, value); ++ netsec_writel(priv, MAC_REG_CMD, addr | NETSEC_GMAC_CMD_ST_WRITE); ++ return netsec_wait_while_busy(priv, ++ MAC_REG_CMD, NETSEC_GMAC_CMD_ST_BUSY); ++} ++ ++static int netsec_mac_read(struct netsec_priv *priv, u32 addr, u32 *read) ++{ ++ int ret; ++ ++ netsec_writel(priv, MAC_REG_CMD, addr | NETSEC_GMAC_CMD_ST_READ); ++ ret = netsec_wait_while_busy(priv, ++ MAC_REG_CMD, NETSEC_GMAC_CMD_ST_BUSY); ++ if (ret) ++ return ret; ++ ++ *read = netsec_readl(priv, MAC_REG_DATA); ++ ++ return 0; ++} ++ ++static int netsec_mac_wait_while_busy(struct netsec_priv *priv, ++ u32 addr, u32 mask) ++{ ++ u32 timeout = TIMEOUT_SPINS_MAC; ++ int ret, data; ++ ++ do { ++ ret = netsec_mac_read(priv, addr, &data); ++ if (ret) ++ break; ++ cpu_relax(); ++ } while (--timeout && (data & mask)); ++ ++ if (timeout) ++ return 0; ++ ++ timeout = TIMEOUT_SECONDARY_MS_MAC; ++ do { ++ usleep_range(1000, 2000); ++ ++ ret = netsec_mac_read(priv, addr, &data); ++ if (ret) ++ break; ++ cpu_relax(); ++ } while (--timeout && (data & mask)); ++ ++ if (timeout && !ret) ++ return 0; ++ ++ netdev_WARN(priv->ndev, "%s: timeout\n", __func__); ++ ++ return -ETIMEDOUT; ++} ++ ++static int netsec_mac_update_to_phy_state(struct netsec_priv *priv) ++{ ++ struct phy_device *phydev = priv->ndev->phydev; ++ u32 value = 0; ++ ++ value = phydev->duplex ? NETSEC_GMAC_MCR_REG_FULL_DUPLEX_COMMON : ++ NETSEC_GMAC_MCR_REG_HALF_DUPLEX_COMMON; ++ ++ if (phydev->speed != SPEED_1000) ++ value |= NETSEC_MCR_PS; ++ ++ if ((priv->phy_interface != PHY_INTERFACE_MODE_GMII) && ++ (phydev->speed == SPEED_100)) ++ value |= NETSEC_GMAC_MCR_REG_FES; ++ ++ value |= NETSEC_GMAC_MCR_REG_CST | NETSEC_GMAC_MCR_REG_JE; ++ ++ if (priv->phy_interface == PHY_INTERFACE_MODE_RGMII) ++ value |= NETSEC_GMAC_MCR_REG_IBN; ++ ++ if (netsec_mac_write(priv, GMAC_REG_MCR, value)) ++ return -ETIMEDOUT; ++ ++ priv->actual_link_speed = phydev->speed; ++ priv->actual_duplex = phydev->duplex; ++ ++ return 0; ++} ++ ++/* NB netsec_start_gmac() only called from adjust_link */ ++ ++int netsec_start_gmac(struct netsec_priv *priv) ++{ ++ struct phy_device *phydev = priv->ndev->phydev; ++ u32 value = 0; ++ int ret; ++ ++ if (priv->desc_ring[NETSEC_RING_TX].running && ++ priv->desc_ring[NETSEC_RING_RX].running) ++ return 0; ++ ++ if (!priv->desc_ring[NETSEC_RING_RX].running && ++ !priv->desc_ring[NETSEC_RING_TX].running) { ++ if (phydev->speed != SPEED_1000) ++ value = (NETSEC_GMAC_MCR_REG_CST | ++ NETSEC_GMAC_MCR_REG_HALF_DUPLEX_COMMON); ++ ++ if (netsec_mac_write(priv, GMAC_REG_MCR, value)) ++ return -ETIMEDOUT; ++ if (netsec_mac_write(priv, GMAC_REG_BMR, ++ NETSEC_GMAC_BMR_REG_RESET)) ++ return -ETIMEDOUT; ++ ++ /* Wait soft reset */ ++ usleep_range(1000, 5000); ++ ++ ret = netsec_mac_read(priv, GMAC_REG_BMR, &value); ++ if (ret) ++ return ret; ++ if (value & NETSEC_GMAC_BMR_REG_SWR) ++ return -EAGAIN; ++ ++ netsec_writel(priv, MAC_REG_DESC_SOFT_RST, 1); ++ if (netsec_wait_while_busy(priv, MAC_REG_DESC_SOFT_RST, 1)) ++ return -ETIMEDOUT; ++ ++ netsec_writel(priv, MAC_REG_DESC_INIT, 1); ++ if (netsec_wait_while_busy(priv, MAC_REG_DESC_INIT, 1)) ++ return -ETIMEDOUT; ++ ++ if (netsec_mac_write(priv, GMAC_REG_BMR, ++ NETSEC_GMAC_BMR_REG_COMMON)) ++ return -ETIMEDOUT; ++ if (netsec_mac_write(priv, GMAC_REG_RDLAR, ++ NETSEC_GMAC_RDLAR_REG_COMMON)) ++ return -ETIMEDOUT; ++ if (netsec_mac_write(priv, GMAC_REG_TDLAR, ++ NETSEC_GMAC_TDLAR_REG_COMMON)) ++ return -ETIMEDOUT; ++ if (netsec_mac_write(priv, GMAC_REG_MFFR, 0x80000001)) ++ return -ETIMEDOUT; ++ ++ ret = netsec_mac_update_to_phy_state(priv); ++ if (ret) ++ return ret; ++ ++ if (priv->mac_mode.flow_ctrl_enable_flag) { ++ netsec_writel(priv, MAC_REG_FLOW_TH, ++ (priv->mac_mode.flow_stop_th << 16) | ++ priv->mac_mode.flow_start_th); ++ if (netsec_mac_write(priv, GMAC_REG_FCR, ++ (priv->mac_mode.pause_time << 16) | ++ NETSEC_FCR_RFE | NETSEC_FCR_TFE)) ++ return -ETIMEDOUT; ++ } ++ } ++ ++ ret = netsec_mac_read(priv, GMAC_REG_OMR, &value); ++ if (ret) ++ return ret; ++ ++ if (!priv->desc_ring[NETSEC_RING_RX].running) { ++ value |= NETSEC_GMAC_OMR_REG_SR; ++ netsec_start_desc_ring(priv, NETSEC_RING_RX); ++ } ++ if (!priv->desc_ring[NETSEC_RING_TX].running) { ++ value |= NETSEC_GMAC_OMR_REG_ST; ++ netsec_start_desc_ring(priv, NETSEC_RING_TX); ++ } ++ ++ if (netsec_mac_write(priv, GMAC_REG_OMR, value)) ++ return -ETIMEDOUT; ++ ++ netsec_writel(priv, NETSEC_REG_INTEN_SET, ++ NETSEC_IRQ_TX | NETSEC_IRQ_RX); ++ ++ return 0; ++} ++ ++int netsec_stop_gmac(struct netsec_priv *priv) ++{ ++ u32 value; ++ int ret; ++ ++ ret = netsec_mac_read(priv, GMAC_REG_OMR, &value); ++ if (ret) ++ return ret; ++ ++ if (priv->desc_ring[NETSEC_RING_RX].running) { ++ value &= ~NETSEC_GMAC_OMR_REG_SR; ++ netsec_stop_desc_ring(priv, NETSEC_RING_RX); ++ } ++ if (priv->desc_ring[NETSEC_RING_TX].running) { ++ value &= ~NETSEC_GMAC_OMR_REG_ST; ++ netsec_stop_desc_ring(priv, NETSEC_RING_TX); ++ } ++ ++ priv->actual_link_speed = 0; ++ priv->actual_duplex = false; ++ ++ return netsec_mac_write(priv, GMAC_REG_OMR, value); ++} ++ ++static int netsec_phy_write(struct mii_bus *bus, ++ int phy_addr, int reg, u16 val) ++{ ++ struct netsec_priv *priv = bus->priv; ++ ++ if (netsec_mac_write(priv, GMAC_REG_GDR, val)) ++ return -ETIMEDOUT; ++ if (netsec_mac_write(priv, GMAC_REG_GAR, ++ phy_addr << NETSEC_GMAC_GAR_REG_SHIFT_PA | ++ reg << NETSEC_GMAC_GAR_REG_SHIFT_GR | ++ NETSEC_GMAC_GAR_REG_GW | NETSEC_GMAC_GAR_REG_GB | ++ (netsec_clk_type(priv->freq) << ++ GMAC_REG_SHIFT_CR_GAR))) ++ return -ETIMEDOUT; ++ ++ return netsec_mac_wait_while_busy(priv, GMAC_REG_GAR, ++ NETSEC_GMAC_GAR_REG_GB); ++} ++ ++static int netsec_phy_read(struct mii_bus *bus, int phy_addr, int reg_addr) ++{ ++ struct netsec_priv *priv = bus->priv; ++ u32 data; ++ int ret; ++ ++ if (netsec_mac_write(priv, GMAC_REG_GAR, NETSEC_GMAC_GAR_REG_GB | ++ phy_addr << NETSEC_GMAC_GAR_REG_SHIFT_PA | ++ reg_addr << NETSEC_GMAC_GAR_REG_SHIFT_GR | ++ (netsec_clk_type(priv->freq) << ++ GMAC_REG_SHIFT_CR_GAR))) ++ return -ETIMEDOUT; ++ ++ ret = netsec_mac_wait_while_busy(priv, GMAC_REG_GAR, ++ NETSEC_GMAC_GAR_REG_GB); ++ if (ret) ++ return ret; ++ ++ ret = netsec_mac_read(priv, GMAC_REG_GDR, &data); ++ if (ret) ++ return ret; ++ ++ return data; ++} ++ ++int netsec_mii_register(struct netsec_priv *priv) ++{ ++ struct mii_bus *bus = devm_mdiobus_alloc(priv->dev); ++ int ret; ++ ++ if (!bus) ++ return -ENOMEM; ++ ++ snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(priv->dev)); ++ bus->priv = priv; ++ bus->name = "SNI NETSEC MDIO"; ++ bus->read = netsec_phy_read; ++ bus->write = netsec_phy_write; ++ bus->parent = priv->dev; ++ priv->mii_bus = bus; ++ ++ if (dev_of_node(priv->dev)) { ++ ret = of_mdiobus_register(bus, dev_of_node(priv->dev)); ++ } else { ++ /* Mask out all PHYs from auto probing. */ ++ bus->phy_mask = ~0; ++ ret = mdiobus_register(bus); ++ } ++ return ret; ++} ++ ++void netsec_mii_unregister(struct netsec_priv *priv) ++{ ++ mdiobus_unregister(priv->mii_bus); ++} +diff --git a/drivers/net/ethernet/socionext/netsec/netsec_netdev.c b/drivers/net/ethernet/socionext/netsec/netsec_netdev.c +new file mode 100644 +index 0000000..e99cf0e +--- /dev/null ++++ b/drivers/net/ethernet/socionext/netsec/netsec_netdev.c +@@ -0,0 +1,540 @@ ++/** ++ * drivers/net/ethernet/socionext/netsec/netsec_netdev.c ++ * ++ * Copyright (C) 2013-2014 Fujitsu Semiconductor Limited. ++ * Copyright (C) 2014-2017 Linaro Ltd. All rights reserved. ++ * Andy Green <andy.green@linaro.org> ++ * Jassi Brar <jaswinder.singh@linaro.org> ++ * Ard Biesheuvel <ard.biesheuvel@linaro.org> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ */ ++ ++#include <linux/ip.h> ++#include <linux/ipv6.h> ++#include <linux/tcp.h> ++#include <net/tcp.h> ++#include <net/ip6_checksum.h> ++#include <linux/pm_runtime.h> ++ ++#include "netsec.h" ++ ++#define WAIT_FW_RDY_TIMEOUT 50 ++ ++static const u32 desc_ring_irq_status_reg_addr[] = { ++ NETSEC_REG_NRM_TX_STATUS, ++ NETSEC_REG_NRM_RX_STATUS, ++}; ++ ++static const u32 desc_ads[] = { ++ NETSEC_REG_NRM_TX_CONFIG, ++ NETSEC_REG_NRM_RX_CONFIG, ++}; ++ ++static const u32 netsec_desc_start_reg_addr_up[] = { ++ NETSEC_REG_NRM_TX_DESC_START_UP, ++ NETSEC_REG_NRM_RX_DESC_START_UP, ++}; ++ ++static const u32 netsec_desc_start_reg_addr_lw[] = { ++ NETSEC_REG_NRM_TX_DESC_START_LW, ++ NETSEC_REG_NRM_RX_DESC_START_LW, ++}; ++ ++static u32 netsec_calc_pkt_ctrl_reg_param(const struct netsec_pkt_ctrlaram ++ *pkt_ctrlaram_p) ++{ ++ u32 param = NETSEC_PKT_CTRL_REG_MODE_NRM; ++ ++ if (pkt_ctrlaram_p->log_chksum_er_flag) ++ param |= NETSEC_PKT_CTRL_REG_LOG_CHKSUM_ER; ++ ++ if (pkt_ctrlaram_p->log_hd_imcomplete_flag) ++ param |= NETSEC_PKT_CTRL_REG_LOG_HD_INCOMPLETE; ++ ++ if (pkt_ctrlaram_p->log_hd_er_flag) ++ param |= NETSEC_PKT_CTRL_REG_LOG_HD_ER; ++ ++ return param; ++} ++ ++static int netsec_netdev_load_ucode_region(struct netsec_priv *priv, u32 reg, ++ u32 addr_h, u32 addr_l, u32 size) ++{ ++ u64 base = (u64)addr_h << 32 | addr_l; ++ __le32 *ucode; ++ u32 i; ++ ++ ucode = memremap(base, size * sizeof(u32), MEMREMAP_WT); ++ if (!ucode) ++ return -ENOMEM; ++ ++ for (i = 0; i < size; i++) ++ netsec_writel(priv, reg, le32_to_cpu(ucode[i])); ++ ++ memunmap(ucode); ++ return 0; ++} ++ ++static int netsec_netdev_load_microcode(struct netsec_priv *priv) ++{ ++ int err; ++ ++ err = netsec_netdev_load_ucode_region( ++ priv, NETSEC_REG_DMAC_HM_CMD_BUF, ++ le32_to_cpup(priv->eeprom_base + NETSEC_EEPROM_HM_ME_ADDRESS_H), ++ le32_to_cpup(priv->eeprom_base + NETSEC_EEPROM_HM_ME_ADDRESS_L), ++ le32_to_cpup(priv->eeprom_base + NETSEC_EEPROM_HM_ME_SIZE)); ++ if (err) ++ return err; ++ ++ err = netsec_netdev_load_ucode_region( ++ priv, NETSEC_REG_DMAC_MH_CMD_BUF, ++ le32_to_cpup(priv->eeprom_base + NETSEC_EEPROM_MH_ME_ADDRESS_H), ++ le32_to_cpup(priv->eeprom_base + NETSEC_EEPROM_MH_ME_ADDRESS_L), ++ le32_to_cpup(priv->eeprom_base + NETSEC_EEPROM_MH_ME_SIZE)); ++ if (err) ++ return err; ++ ++ err = netsec_netdev_load_ucode_region( ++ priv, NETSEC_REG_PKT_CMD_BUF, ++ 0, ++ le32_to_cpup(priv->eeprom_base + NETSEC_EEPROM_PKT_ME_ADDRESS), ++ le32_to_cpup(priv->eeprom_base + NETSEC_EEPROM_PKT_ME_SIZE)); ++ if (err) ++ return err; ++ ++ return 0; ++} ++ ++static int netsec_init_hardware(struct netsec_priv *priv) ++{ ++ u32 value; ++ int err; ++ ++ /* set desc_start addr */ ++ netsec_writel(priv, netsec_desc_start_reg_addr_up[NETSEC_RING_RX], ++ upper_32_bits(priv->desc_ring[NETSEC_RING_RX].desc_phys)); ++ netsec_writel(priv, netsec_desc_start_reg_addr_lw[NETSEC_RING_RX], ++ lower_32_bits(priv->desc_ring[NETSEC_RING_RX].desc_phys)); ++ ++ netsec_writel(priv, netsec_desc_start_reg_addr_up[NETSEC_RING_TX], ++ upper_32_bits(priv->desc_ring[NETSEC_RING_TX].desc_phys)); ++ netsec_writel(priv, netsec_desc_start_reg_addr_lw[NETSEC_RING_TX], ++ lower_32_bits(priv->desc_ring[NETSEC_RING_TX].desc_phys)); ++ ++ /* set normal tx desc ring config */ ++ netsec_writel(priv, desc_ads[NETSEC_RING_TX], ++ 1 << NETSEC_REG_DESC_ENDIAN); ++ netsec_writel(priv, desc_ads[NETSEC_RING_RX], ++ 1 << NETSEC_REG_DESC_ENDIAN); ++ ++ err = netsec_netdev_load_microcode(priv); ++ if (err) { ++ netif_err(priv, probe, priv->ndev, ++ "%s: failed to load microcode (%d)\n", __func__, err); ++ return err; ++ } ++ ++ /* start DMA engines */ ++ netsec_writel(priv, NETSEC_REG_DMA_TMR_CTRL, priv->freq / 1000000 - 1); ++ netsec_writel(priv, NETSEC_REG_ADDR_DIS_CORE, 0); ++ ++ usleep_range(1000, 2000); ++ ++ if (!(netsec_readl(priv, NETSEC_REG_TOP_STATUS) & ++ NETSEC_TOP_IRQ_REG_CODE_LOAD_END)) { ++ netif_err(priv, drv, priv->ndev, "microengine start failed\n"); ++ return -ENXIO; ++ } ++ netsec_writel(priv, NETSEC_REG_TOP_STATUS, ++ NETSEC_TOP_IRQ_REG_CODE_LOAD_END); ++ ++ value = netsec_calc_pkt_ctrl_reg_param(&priv->param.pkt_ctrlaram); ++ ++ if (priv->param.use_jumbo_pkt_flag) ++ value |= NETSEC_PKT_CTRL_REG_EN_JUMBO; ++ ++ /* change to normal mode */ ++ netsec_writel(priv, NETSEC_REG_DMA_MH_CTRL, MH_CTRL__MODE_TRANS); ++ netsec_writel(priv, NETSEC_REG_PKT_CTRL, value); ++ ++ while ((netsec_readl(priv, NETSEC_REG_MODE_TRANS_COMP_STATUS) & ++ NETSEC_MODE_TRANS_COMP_IRQ_T2N) == 0) ++ cpu_relax(); ++ ++ return 0; ++} ++ ++static void netsec_ring_irq_clr(struct netsec_priv *priv, ++ unsigned int id, u32 value) ++{ ++ netsec_writel(priv, desc_ring_irq_status_reg_addr[id], ++ value & (NETSEC_IRQ_EMPTY | NETSEC_IRQ_ERR)); ++} ++ ++static void netsec_napi_tx_processing(struct netsec_priv *priv) ++{ ++ netsec_ring_irq_clr(priv, NETSEC_RING_TX, NETSEC_IRQ_EMPTY); ++ netsec_clean_tx_desc_ring(priv); ++ ++ if (netif_queue_stopped(priv->ndev) && ++ netsec_get_tx_avail_num(priv) >= NETSEC_NETDEV_TX_PKT_SCAT_NUM_MAX) ++ netif_wake_queue(priv->ndev); ++} ++ ++int netsec_netdev_napi_poll(struct napi_struct *napi_p, int budget) ++{ ++ struct netsec_priv *priv = container_of(napi_p, struct netsec_priv, ++ napi); ++ struct net_device *ndev = priv->ndev; ++ struct netsec_rx_pkt_info rx_info; ++ int ret, done = 0, rx_num = 0; ++ struct netsec_frag_info frag; ++ struct sk_buff *skb; ++ u16 len; ++ ++ netsec_napi_tx_processing(priv); ++ ++ while (done < budget) { ++ if (!rx_num) { ++ rx_num = netsec_get_rx_num(priv); ++ if (!rx_num) ++ break; ++ } ++ done++; ++ rx_num--; ++ ret = netsec_get_rx_pkt_data(priv, &rx_info, &frag, &len, &skb); ++ if (unlikely(ret == -ENOMEM)) { ++ netif_err(priv, drv, priv->ndev, ++ "%s: rx fail %d\n", __func__, ret); ++ ndev->stats.rx_dropped++; ++ continue; ++ } ++ dma_unmap_single(priv->dev, frag.dma_addr, frag.len, ++ DMA_FROM_DEVICE); ++ skb_put(skb, len); ++ skb->protocol = eth_type_trans(skb, priv->ndev); ++ ++ if (priv->rx_cksum_offload_flag && ++ rx_info.rx_cksum_result == NETSEC_RX_CKSUM_OK) ++ skb->ip_summed = CHECKSUM_UNNECESSARY; ++ ++ if (napi_gro_receive(napi_p, skb) != GRO_DROP) { ++ ndev->stats.rx_packets++; ++ ndev->stats.rx_bytes += len; ++ } ++ } ++ ++ if (done < budget && napi_complete_done(napi_p, done)) ++ netsec_writel(priv, NETSEC_REG_INTEN_SET, ++ NETSEC_IRQ_TX | NETSEC_IRQ_RX); ++ return done; ++} ++ ++static netdev_tx_t netsec_netdev_start_xmit(struct sk_buff *skb, ++ struct net_device *ndev) ++{ ++ struct netsec_priv *priv = netdev_priv(ndev); ++ struct netsec_tx_pkt_ctrl tx_ctrl = {}; ++ u16 pend_tx, tso_seg_len = 0; ++ skb_frag_t *frag; ++ int count_frags; ++ int ret, i; ++ ++ netsec_ring_irq_clr(priv, NETSEC_RING_TX, NETSEC_IRQ_EMPTY); ++ ++ count_frags = skb_shinfo(skb)->nr_frags + 1; ++ ++ if (skb->ip_summed == CHECKSUM_PARTIAL) { ++ if ((skb->protocol == htons(ETH_P_IP) && ++ ip_hdr(skb)->protocol == IPPROTO_TCP) || ++ (skb->protocol == htons(ETH_P_IPV6) && ++ ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)) ++ tx_ctrl.cksum_offload_flag = true; ++ else ++ skb_checksum_help(skb); ++ } ++ ++ if (skb_is_gso(skb)) ++ tso_seg_len = skb_shinfo(skb)->gso_size; ++ ++ if (tso_seg_len > 0) { ++ if (skb->protocol == htons(ETH_P_IP)) { ++ ip_hdr(skb)->tot_len = 0; ++ tcp_hdr(skb)->check = ++ ~tcp_v4_check(0, ip_hdr(skb)->saddr, ++ ip_hdr(skb)->daddr, 0); ++ } else { ++ ipv6_hdr(skb)->payload_len = 0; ++ tcp_hdr(skb)->check = ++ ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, ++ &ipv6_hdr(skb)->daddr, ++ 0, IPPROTO_TCP, 0); ++ } ++ ++ tx_ctrl.tcp_seg_offload_flag = true; ++ tx_ctrl.tcp_seg_len = tso_seg_len; ++ } ++ ++ priv->tx_info[0].dma_addr = dma_map_single(priv->dev, skb->data, ++ skb_headlen(skb), ++ DMA_TO_DEVICE); ++ if (dma_mapping_error(priv->dev, priv->tx_info[0].dma_addr)) { ++ netif_err(priv, drv, priv->ndev, ++ "%s: DMA mapping failed\n", __func__); ++ return NETDEV_TX_OK; ++ } ++ priv->tx_info[0].addr = skb->data; ++ priv->tx_info[0].len = skb_headlen(skb); ++ ++ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { ++ frag = &skb_shinfo(skb)->frags[i]; ++ priv->tx_info[i + 1].dma_addr = ++ skb_frag_dma_map(priv->dev, frag, 0, ++ skb_frag_size(frag), DMA_TO_DEVICE); ++ priv->tx_info[i + 1].addr = skb_frag_address(frag); ++ priv->tx_info[i + 1].len = frag->size; ++ } ++ ++ netsec_mark_skb_type(skb, NETSEC_RING_TX); ++ ++ ret = netsec_set_tx_pkt_data(priv, &tx_ctrl, count_frags, ++ priv->tx_info, skb); ++ if (ret) { ++ netif_info(priv, drv, priv->ndev, ++ "set tx pkt failed %d\n", ret); ++ for (i = 0; i < count_frags; i++) ++ dma_unmap_single(priv->dev, priv->tx_info[i].dma_addr, ++ priv->tx_info[i].len, DMA_TO_DEVICE); ++ ndev->stats.tx_dropped++; ++ ++ return NETDEV_TX_OK; ++ } ++ ++ netdev_sent_queue(priv->ndev, skb->len); ++ ++ spin_lock(&priv->tx_queue_lock); ++ pend_tx = netsec_get_tx_avail_num(priv); ++ ++ if (pend_tx < NETSEC_NETDEV_TX_PKT_SCAT_NUM_MAX) { ++ netsec_ring_irq_enable(priv, NETSEC_RING_TX, NETSEC_IRQ_EMPTY); ++ netif_stop_queue(ndev); ++ goto err; ++ } ++ if (pend_tx <= DESC_NUM - 2) { ++ netsec_ring_irq_enable(priv, NETSEC_RING_TX, NETSEC_IRQ_EMPTY); ++ goto err; ++ } ++ netsec_ring_irq_disable(priv, NETSEC_RING_TX, NETSEC_IRQ_EMPTY); ++ ++err: ++ spin_unlock(&priv->tx_queue_lock); ++ ++ return NETDEV_TX_OK; ++} ++ ++static int netsec_netdev_set_features(struct net_device *ndev, ++ netdev_features_t features) ++{ ++ struct netsec_priv *priv = netdev_priv(ndev); ++ ++ priv->rx_cksum_offload_flag = !!(features & NETIF_F_RXCSUM); ++ ++ return 0; ++} ++ ++static void netsec_phy_adjust_link(struct net_device *ndev) ++{ ++ struct netsec_priv *priv = netdev_priv(ndev); ++ ++ if (priv->actual_link_speed == ndev->phydev->speed && ++ priv->actual_duplex == ndev->phydev->duplex) ++ return; ++ ++ phy_print_status(ndev->phydev); ++ ++ netsec_stop_gmac(priv); ++ netsec_start_gmac(priv); ++} ++ ++static irqreturn_t netsec_irq_handler(int irq, void *dev_id) ++{ ++ struct netsec_priv *priv = dev_id; ++ u32 status = netsec_readl(priv, NETSEC_REG_TOP_STATUS) & ++ netsec_readl(priv, NETSEC_REG_TOP_INTEN); ++ ++ if (!status) ++ return IRQ_NONE; ++ ++ if (status & (NETSEC_IRQ_TX | NETSEC_IRQ_RX)) { ++ netsec_writel(priv, NETSEC_REG_INTEN_CLR, ++ status & (NETSEC_IRQ_TX | NETSEC_IRQ_RX)); ++ napi_schedule(&priv->napi); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++static void netsec_reset_hardware(struct netsec_priv *priv) ++{ ++ /* stop DMA engines */ ++ if (!netsec_readl(priv, NETSEC_REG_ADDR_DIS_CORE)) { ++ netsec_writel(priv, NETSEC_REG_DMA_HM_CTRL, ++ NETSEC_DMA_CTRL_REG_STOP); ++ netsec_writel(priv, NETSEC_REG_DMA_MH_CTRL, ++ NETSEC_DMA_CTRL_REG_STOP); ++ ++ while (netsec_readl(priv, NETSEC_REG_DMA_HM_CTRL) & ++ NETSEC_DMA_CTRL_REG_STOP) ++ cpu_relax(); ++ ++ while (netsec_readl(priv, NETSEC_REG_DMA_MH_CTRL) & ++ NETSEC_DMA_CTRL_REG_STOP) ++ cpu_relax(); ++ } ++ ++ netsec_writel(priv, NETSEC_REG_SOFT_RST, NETSEC_SOFT_RST_REG_RESET); ++ netsec_writel(priv, NETSEC_REG_SOFT_RST, NETSEC_SOFT_RST_REG_RUN); ++ netsec_writel(priv, NETSEC_REG_COM_INIT, NETSEC_COM_INIT_REG_ALL); ++ ++ while (netsec_readl(priv, NETSEC_REG_COM_INIT) != 0) ++ cpu_relax(); ++} ++ ++static int netsec_netdev_open(struct net_device *ndev) ++{ ++ struct netsec_priv *priv = netdev_priv(ndev); ++ int ret, n; ++ ++ pm_runtime_get_sync(priv->dev); ++ ++ netsec_reset_hardware(priv); ++ ++ for (n = 0; n <= NETSEC_RING_MAX; n++) { ++ ret = netsec_alloc_desc_ring(priv, n); ++ if (ret) { ++ netif_err(priv, probe, priv->ndev, ++ "%s: alloc ring failed\n", __func__); ++ goto err; ++ } ++ } ++ ++ ret = netsec_setup_rx_desc(priv, &priv->desc_ring[NETSEC_RING_RX]); ++ if (ret) { ++ netif_err(priv, probe, priv->ndev, ++ "%s: fail setup ring\n", __func__); ++ goto err1; ++ } ++ ++ ret = netsec_init_hardware(priv); ++ if (ret) { ++ netif_err(priv, probe, priv->ndev, ++ "%s: netsec_init_hardware fail %d\n", __func__, ret); ++ goto err1; ++ } ++ ++ ret = request_irq(priv->ndev->irq, netsec_irq_handler, ++ IRQF_SHARED, "netsec", priv); ++ if (ret) { ++ netif_err(priv, drv, priv->ndev, "request_irq failed\n"); ++ goto err1; ++ } ++ priv->irq_registered = true; ++ ++ ret = netsec_clean_rx_desc_ring(priv); ++ if (ret) { ++ netif_err(priv, drv, priv->ndev, ++ "%s: clean rx desc fail\n", __func__); ++ goto err2; ++ } ++ ++ ret = netsec_clean_tx_desc_ring(priv); ++ if (ret) { ++ netif_err(priv, drv, priv->ndev, ++ "%s: clean tx desc fail\n", __func__); ++ goto err2; ++ } ++ ++ netsec_ring_irq_clr(priv, NETSEC_RING_TX, NETSEC_IRQ_EMPTY); ++ ++ if (dev_of_node(priv->dev)) { ++ if (!of_phy_connect(priv->ndev, priv->phy_np, ++ netsec_phy_adjust_link, 0, ++ priv->phy_interface)) { ++ netif_err(priv, link, priv->ndev, "missing PHY\n"); ++ goto err2; ++ } ++ } else { ++ ret = phy_connect_direct(priv->ndev, priv->phydev, ++ netsec_phy_adjust_link, ++ priv->phy_interface); ++ if (ret) { ++ netif_err(priv, link, priv->ndev, ++ "phy_connect_direct() failed (%d)\n", ret); ++ goto err2; ++ } ++ } ++ ++ phy_start_aneg(ndev->phydev); ++ ++ netsec_ring_irq_disable(priv, NETSEC_RING_TX, NETSEC_IRQ_EMPTY); ++ ++ netsec_start_gmac(priv); ++ napi_enable(&priv->napi); ++ netif_start_queue(ndev); ++ ++ netsec_writel(priv, NETSEC_REG_INTEN_SET, ++ NETSEC_IRQ_TX | NETSEC_IRQ_RX); ++ ++ return 0; ++ ++err2: ++ pm_runtime_put_sync(priv->dev); ++ free_irq(priv->ndev->irq, priv); ++ priv->irq_registered = false; ++err1: ++ for (n = 0; n <= NETSEC_RING_MAX; n++) ++ netsec_free_desc_ring(priv, &priv->desc_ring[n]); ++err: ++ pm_runtime_put_sync(priv->dev); ++ ++ return ret; ++} ++ ++static int netsec_netdev_stop(struct net_device *ndev) ++{ ++ struct netsec_priv *priv = netdev_priv(ndev); ++ int n; ++ ++ phy_stop(ndev->phydev); ++ phy_disconnect(ndev->phydev); ++ ++ netif_stop_queue(priv->ndev); ++ napi_disable(&priv->napi); ++ ++ netsec_writel(priv, NETSEC_REG_INTEN_CLR, ~0); ++ netsec_stop_gmac(priv); ++ ++ pm_runtime_put_sync(priv->dev); ++ ++ for (n = 0; n <= NETSEC_RING_MAX; n++) ++ netsec_free_desc_ring(priv, &priv->desc_ring[n]); ++ ++ free_irq(priv->ndev->irq, priv); ++ priv->irq_registered = false; ++ ++ return 0; ++} ++ ++const struct net_device_ops netsec_netdev_ops = { ++ .ndo_open = netsec_netdev_open, ++ .ndo_stop = netsec_netdev_stop, ++ .ndo_start_xmit = netsec_netdev_start_xmit, ++ .ndo_set_features = netsec_netdev_set_features, ++ .ndo_set_mac_address = eth_mac_addr, ++ .ndo_validate_addr = eth_validate_addr, ++}; +diff --git a/drivers/net/ethernet/socionext/netsec/netsec_platform.c b/drivers/net/ethernet/socionext/netsec/netsec_platform.c +new file mode 100644 +index 0000000..624f6a7 +--- /dev/null ++++ b/drivers/net/ethernet/socionext/netsec/netsec_platform.c +@@ -0,0 +1,435 @@ ++/** ++ * drivers/net/ethernet/socionext/netsec/netsec_platform.c ++ * ++ * Copyright (C) 2013-2014 Fujitsu Semiconductor Limited. ++ * Copyright (C) 2014-2017 Linaro Ltd. All rights reserved. ++ * Andy Green <andy.green@linaro.org> ++ * Jassi Brar <jaswinder.singh@linaro.org> ++ * Ard Biesheuvel <ard.biesheuvel@linaro.org> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ */ ++ ++#include <linux/acpi.h> ++#include <linux/device.h> ++#include <linux/ctype.h> ++#include <linux/netdevice.h> ++#include <linux/types.h> ++#include <linux/bitops.h> ++#include <linux/dma-mapping.h> ++#include <linux/module.h> ++#include <linux/sizes.h> ++#include <linux/platform_device.h> ++#include <linux/clk.h> ++#include <linux/of.h> ++#include <linux/of_device.h> ++#include <linux/of_net.h> ++#include <linux/io.h> ++#include <linux/pm_runtime.h> ++ ++#include "netsec.h" ++ ++#define NETSEC_F_NETSEC_VER_MAJOR_NUM(x) (x & 0xffff0000) ++ ++static int napi_weight = 64; ++static u16 pause_time = 256; ++ ++static int netsec_of_probe(struct platform_device *pdev, ++ struct netsec_priv *priv) ++{ ++ int clk_count, ret, i; ++ ++ priv->phy_np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0); ++ if (!priv->phy_np) { ++ dev_err(&pdev->dev, "missing required property 'phy-handle'\n"); ++ return -EINVAL; ++ } ++ ++ /* we require named clocks if there is more than one */ ++ clk_count = of_property_count_strings(pdev->dev.of_node, "clock-names"); ++ if (clk_count > 1) { ++ if (clk_count > ARRAY_SIZE(priv->clk)) { ++ dev_err(&pdev->dev, "too many clocks specified (%d)\n", ++ clk_count); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < clk_count; i++) { ++ const char *clk_name; ++ ++ ret = of_property_read_string_index(pdev->dev.of_node, ++ "clock-names", i, ++ &clk_name); ++ if (ret) { ++ dev_err(&pdev->dev, ++ "failed to parse 'clock-names'\n"); ++ return ret; ++ } ++ priv->clk[i] = devm_clk_get(&pdev->dev, clk_name); ++ if (!strcmp(clk_name, "phy_refclk")) { ++ priv->freq = clk_get_rate(priv->clk[i]); ++ dev_dbg(&pdev->dev, ++ "found PHY refclock #%d freq %u\n", ++ i, priv->freq); ++ } ++ } ++ priv->clock_count = clk_count; ++ } else { ++ priv->clk[0] = devm_clk_get(&pdev->dev, NULL); ++ if (IS_ERR(priv->clk)) { ++ dev_err(&pdev->dev, ++ "missing required property 'clocks'\n"); ++ return PTR_ERR(priv->clk); ++ } ++ priv->freq = clk_get_rate(priv->clk[0]); ++ priv->clock_count = 1; ++ } ++ return 0; ++} ++ ++static int netsec_acpi_probe(struct platform_device *pdev, ++ struct netsec_priv *priv, u32 *phy_addr) ++{ ++ int ret; ++ ++ if (!IS_ENABLED(CONFIG_ACPI)) ++ return -ENODEV; ++ ++ ret = device_property_read_u32(&pdev->dev, "phy-channel", phy_addr); ++ if (ret) { ++ dev_err(&pdev->dev, ++ "missing required property 'phy-channel'\n"); ++ return ret; ++ } ++ ++ ret = device_property_read_u32(&pdev->dev, ++ "socionext,phy-clock-frequency", ++ &priv->freq); ++ if (ret) ++ dev_err(&pdev->dev, ++ "missing required property 'socionext,phy-clock-frequency'\n"); ++ return ret; ++} ++ ++static int netsec_probe(struct platform_device *pdev) ++{ ++ struct net_device *ndev; ++ struct netsec_priv *priv; ++ struct resource *mmio_res, *eeprom_res, *irq_res; ++ u8 *mac, macbuf[ETH_ALEN]; ++ u32 hw_ver, phy_addr; ++ int ret; ++ ++ mmio_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!mmio_res) { ++ dev_err(&pdev->dev, "No MMIO resource found.\n"); ++ return -ENODEV; ++ } ++ ++ eeprom_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); ++ if (!eeprom_res) { ++ dev_info(&pdev->dev, "No EEPROM resource found.\n"); ++ return -ENODEV; ++ } ++ ++ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); ++ if (!irq_res) { ++ dev_err(&pdev->dev, "No IRQ resource found.\n"); ++ return -ENODEV; ++ } ++ ++ ndev = alloc_etherdev(sizeof(*priv)); ++ if (!ndev) ++ return -ENOMEM; ++ ++ priv = netdev_priv(ndev); ++ priv->ndev = ndev; ++ SET_NETDEV_DEV(ndev, &pdev->dev); ++ platform_set_drvdata(pdev, priv); ++ priv->dev = &pdev->dev; ++ ++ priv->msg_enable = NETIF_MSG_TX_ERR | NETIF_MSG_HW | NETIF_MSG_DRV | ++ NETIF_MSG_LINK | NETIF_MSG_PROBE; ++ ++ ndev->irq = irq_res->start; ++ ++ priv->phy_interface = device_get_phy_mode(&pdev->dev); ++ if (priv->phy_interface < 0) { ++ dev_err(&pdev->dev, "missing required property 'phy-mode'\n"); ++ ret = -ENODEV; ++ goto free_ndev; ++ } ++ ++ priv->ioaddr = devm_ioremap(&pdev->dev, mmio_res->start, ++ resource_size(mmio_res)); ++ if (!priv->ioaddr) { ++ dev_err(&pdev->dev, "devm_ioremap() failed\n"); ++ ret = -ENXIO; ++ goto free_ndev; ++ } ++ ++ priv->eeprom_base = devm_memremap(&pdev->dev, eeprom_res->start, ++ resource_size(eeprom_res), ++ MEMREMAP_WT); ++ if (!priv->eeprom_base) { ++ dev_err(&pdev->dev, "devm_memremap() failed for EEPROM\n"); ++ ret = -ENXIO; ++ goto free_ndev; ++ } ++ ++ mac = device_get_mac_address(&pdev->dev, macbuf, sizeof(macbuf)); ++ if (mac) ++ ether_addr_copy(ndev->dev_addr, mac); ++ ++ if (priv->eeprom_base && ++ (!mac || !is_valid_ether_addr(ndev->dev_addr))) { ++ const u8 *macp = priv->eeprom_base + NETSEC_EEPROM_MAC_ADDRESS; ++ ++ ndev->dev_addr[0] = macp[3]; ++ ndev->dev_addr[1] = macp[2]; ++ ndev->dev_addr[2] = macp[1]; ++ ndev->dev_addr[3] = macp[0]; ++ ndev->dev_addr[4] = macp[7]; ++ ndev->dev_addr[5] = macp[6]; ++ } ++ ++ if (!is_valid_ether_addr(ndev->dev_addr)) { ++ dev_warn(&pdev->dev, "No MAC address found, using random\n"); ++ eth_hw_addr_random(ndev); ++ } ++ ++ if (dev_of_node(&pdev->dev)) ++ ret = netsec_of_probe(pdev, priv); ++ else ++ ret = netsec_acpi_probe(pdev, priv, &phy_addr); ++ if (ret) ++ goto free_ndev; ++ ++ if (!priv->freq) { ++ dev_err(&pdev->dev, "missing PHY reference clock frequency\n"); ++ ret = -ENODEV; ++ goto free_ndev; ++ } ++ ++ /* disable by default */ ++ priv->et_coalesce.rx_coalesce_usecs = 0; ++ priv->et_coalesce.rx_max_coalesced_frames = 1; ++ priv->et_coalesce.tx_coalesce_usecs = 0; ++ priv->et_coalesce.tx_max_coalesced_frames = 1; ++ ++ ret = device_property_read_u32(&pdev->dev, "max-frame-size", ++ &ndev->max_mtu); ++ if (ret < 0) ++ ndev->max_mtu = ETH_DATA_LEN; ++ ++ priv->rx_pkt_buf_len = ndev->max_mtu + 22; ++ priv->param.use_jumbo_pkt_flag = (ndev->max_mtu > ETH_DATA_LEN); ++ ++ pm_runtime_enable(&pdev->dev); ++ /* runtime_pm coverage just for probe, open/close also cover it */ ++ pm_runtime_get_sync(&pdev->dev); ++ ++ hw_ver = netsec_readl(priv, NETSEC_REG_F_TAIKI_VER); ++ /* this driver only supports F_TAIKI style NETSEC */ ++ if (NETSEC_F_NETSEC_VER_MAJOR_NUM(hw_ver) != ++ NETSEC_F_NETSEC_VER_MAJOR_NUM(NETSEC_REG_NETSEC_VER_F_TAIKI)) { ++ ret = -ENODEV; ++ goto pm_disable; ++ } ++ ++ dev_info(&pdev->dev, "hardware revision %d.%d\n", ++ hw_ver >> 16, hw_ver & 0xffff); ++ ++ priv->mac_mode.flow_start_th = NETSEC_FLOW_CONTROL_START_THRESHOLD; ++ priv->mac_mode.flow_stop_th = NETSEC_FLOW_CONTROL_STOP_THRESHOLD; ++ priv->mac_mode.pause_time = pause_time; ++ priv->mac_mode.flow_ctrl_enable_flag = false; ++ ++ netif_napi_add(ndev, &priv->napi, netsec_netdev_napi_poll, napi_weight); ++ ++ ndev->netdev_ops = &netsec_netdev_ops; ++ ndev->ethtool_ops = &netsec_ethtool_ops; ++ ndev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | ++ NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_GSO | ++ NETIF_F_HIGHDMA | NETIF_F_RXCSUM; ++ ndev->hw_features = ndev->features; ++ ++ priv->rx_cksum_offload_flag = true; ++ spin_lock_init(&priv->tx_queue_lock); ++ ++ ret = netsec_mii_register(priv); ++ if (ret) { ++ dev_err(&pdev->dev, "mii bus registration failed (%d)\n", ret); ++ goto pm_disable; ++ } ++ ++ if (!dev_of_node(&pdev->dev)) { /* ACPI */ ++ priv->phydev = get_phy_device(priv->mii_bus, phy_addr, false); ++ if (IS_ERR(priv->phydev)) { ++ dev_err(&pdev->dev, "get_phy_device() failed (%ld)\n", ++ PTR_ERR(priv->phydev)); ++ ret = PTR_ERR(priv->phydev); ++ goto unregister_mii; ++ } ++ ++ ret = phy_device_register(priv->phydev); ++ if (ret) { ++ dev_err(&pdev->dev, ++ "phy_device_register() failed (%d)\n", ret); ++ phy_device_free(priv->phydev); ++ goto unregister_mii; ++ } ++ } ++ ++ /* disable all other interrupt sources */ ++ netsec_writel(priv, NETSEC_REG_INTEN_CLR, ~0); ++ netsec_writel(priv, NETSEC_REG_INTEN_SET, ++ NETSEC_IRQ_TX | NETSEC_IRQ_RX); ++ ++ if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64))) ++ dev_warn(&pdev->dev, "Failed to enable 64-bit DMA\n"); ++ ++ ret = register_netdev(ndev); ++ if (ret) { ++ netif_err(priv, probe, ndev, "register_netdev() failed\n"); ++ goto unregister_mii; ++ } ++ ++ pm_runtime_put_sync_suspend(&pdev->dev); ++ ++ return 0; ++ ++unregister_mii: ++ netsec_mii_unregister(priv); ++ ++pm_disable: ++ pm_runtime_put_sync_suspend(&pdev->dev); ++ pm_runtime_disable(&pdev->dev); ++ ++free_ndev: ++ free_netdev(ndev); ++ ++ dev_err(&pdev->dev, "init failed\n"); ++ ++ return ret; ++} ++ ++static int netsec_remove(struct platform_device *pdev) ++{ ++ struct netsec_priv *priv = platform_get_drvdata(pdev); ++ ++ unregister_netdev(priv->ndev); ++ if (!dev_of_node(&pdev->dev)) { /* ACPI */ ++ phy_device_remove(priv->phydev); ++ phy_device_free(priv->phydev); ++ } ++ netsec_mii_unregister(priv); ++ pm_runtime_disable(&pdev->dev); ++ free_netdev(priv->ndev); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++static int netsec_runtime_suspend(struct device *dev) ++{ ++ struct netsec_priv *priv = dev_get_drvdata(dev); ++ int n; ++ ++ netif_dbg(priv, drv, priv->ndev, "%s\n", __func__); ++ ++ if (priv->irq_registered) ++ disable_irq(priv->ndev->irq); ++ ++ netsec_writel(priv, NETSEC_REG_CLK_EN, 0); ++ ++ for (n = priv->clock_count - 1; n >= 0; n--) ++ clk_disable_unprepare(priv->clk[n]); ++ ++ return 0; ++} ++ ++static int netsec_runtime_resume(struct device *dev) ++{ ++ struct netsec_priv *priv = dev_get_drvdata(dev); ++ int n; ++ ++ netif_dbg(priv, drv, priv->ndev, "%s\n", __func__); ++ ++ /* first let the clocks back on */ ++ ++ for (n = 0; n < priv->clock_count; n++) ++ clk_prepare_enable(priv->clk[n]); ++ ++ netsec_writel(priv, NETSEC_REG_CLK_EN, NETSEC_CLK_EN_REG_DOM_D | ++ NETSEC_CLK_EN_REG_DOM_C | ++ NETSEC_CLK_EN_REG_DOM_G); ++ ++ if (priv->irq_registered) ++ enable_irq(priv->ndev->irq); ++ ++ return 0; ++} ++ ++static int netsec_pm_suspend(struct device *dev) ++{ ++ struct netsec_priv *priv = dev_get_drvdata(dev); ++ ++ netif_dbg(priv, drv, priv->ndev, "%s\n", __func__); ++ ++ if (pm_runtime_status_suspended(dev)) ++ return 0; ++ ++ return netsec_runtime_suspend(dev); ++} ++ ++static int netsec_pm_resume(struct device *dev) ++{ ++ struct netsec_priv *priv = dev_get_drvdata(dev); ++ ++ netif_dbg(priv, drv, priv->ndev, "%s\n", __func__); ++ ++ if (pm_runtime_status_suspended(dev)) ++ return 0; ++ ++ return netsec_runtime_resume(dev); ++} ++#endif ++ ++static const struct dev_pm_ops netsec_pm_ops = { ++ SET_SYSTEM_SLEEP_PM_OPS(netsec_pm_suspend, netsec_pm_resume) ++ SET_RUNTIME_PM_OPS(netsec_runtime_suspend, netsec_runtime_resume, NULL) ++}; ++ ++static const struct of_device_id netsec_dt_ids[] = { ++ { .compatible = "socionext,synquacer-netsec" }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, netsec_dt_ids); ++ ++#ifdef CONFIG_ACPI ++static const struct acpi_device_id netsec_acpi_ids[] = { ++ { "SCX0001" }, ++ { } ++}; ++MODULE_DEVICE_TABLE(acpi, netsec_acpi_ids); ++#endif ++ ++static struct platform_driver netsec_driver = { ++ .probe = netsec_probe, ++ .remove = netsec_remove, ++ .driver.name = "netsec", ++ .driver.of_match_table = netsec_dt_ids, ++ .driver.acpi_match_table = ACPI_PTR(netsec_acpi_ids), ++ .driver.pm = &netsec_pm_ops, ++}; ++module_platform_driver(netsec_driver); ++ ++MODULE_AUTHOR("Andy Green <andy.green@linaro.org>"); ++MODULE_AUTHOR("Jassi Brar <jaswinder.singh@linaro.org>"); ++MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); ++MODULE_DESCRIPTION("NETSEC Ethernet driver"); ++MODULE_LICENSE("GPL"); +-- +cgit v1.1 + +From 31a61532e7b859a797d36595ec5ab7485a9b24d5 Mon Sep 17 00:00:00 2001 +From: Jassi Brar <jassisinghbrar@gmail.com> +Date: Wed, 30 Aug 2017 15:55:52 +0530 +Subject: dt-bindings: net: Add DT bindings for Socionext Netsec + +This patch adds documentation for Device-Tree bindings for the +Socionext NetSec Controller driver. + +Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> +Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> +--- + .../devicetree/bindings/net/socionext-netsec.txt | 43 ++++++++++++++++++++++ + 1 file changed, 43 insertions(+) + create mode 100644 Documentation/devicetree/bindings/net/socionext-netsec.txt + +diff --git a/Documentation/devicetree/bindings/net/socionext-netsec.txt b/Documentation/devicetree/bindings/net/socionext-netsec.txt +new file mode 100644 +index 0000000..4695969 +--- /dev/null ++++ b/Documentation/devicetree/bindings/net/socionext-netsec.txt +@@ -0,0 +1,43 @@ ++* Socionext NetSec Ethernet Controller IP ++ ++Required properties: ++- compatible: Should be "socionext,synquacer-netsec" ++- reg: Address and length of the control register area, followed by the ++ address and length of the EEPROM holding the MAC address and ++ microengine firmware ++- interrupts: Should contain ethernet controller interrupt ++- clocks: phandle to the PHY reference clock, and any other clocks to be ++ switched by runtime_pm ++- clock-names: Required only if more than a single clock is listed in 'clocks'. ++ The PHY reference clock must be named 'phy_refclk' ++- phy-mode: See ethernet.txt file in the same directory ++- phy-handle: phandle to select child phy ++ ++Optional properties: (See ethernet.txt file in the same directory) ++- local-mac-address ++- mac-address ++- max-speed ++- max-frame-size ++ ++Required properties for the child phy: ++- reg: phy address ++ ++Example: ++ eth0: netsec@522D0000 { ++ compatible = "socionext,synquacer-netsec"; ++ reg = <0 0x522D0000 0x0 0x10000>, <0 0x10000000 0x0 0x10000>; ++ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; ++ clocks = <&clk_netsec>; ++ phy-mode = "rgmii"; ++ max-speed = <1000>; ++ max-frame-size = <9000>; ++ phy-handle = <ðphy0>; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ethphy0: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <1>; ++ }; ++ }; +-- +cgit v1.1 + diff --git a/baseconfig/CONFIG_NET_VENDOR_SNI b/baseconfig/CONFIG_NET_VENDOR_SNI new file mode 100644 index 000000000..4f301f9ba --- /dev/null +++ b/baseconfig/CONFIG_NET_VENDOR_SNI @@ -0,0 +1 @@ +# CONFIG_NET_VENDOR_SNI is not set diff --git a/baseconfig/CONFIG_PCIE_DW_HOST_ECAM b/baseconfig/CONFIG_PCIE_DW_HOST_ECAM new file mode 100644 index 000000000..c73d5c1aa --- /dev/null +++ b/baseconfig/CONFIG_PCIE_DW_HOST_ECAM @@ -0,0 +1 @@ +# CONFIG_PCIE_DW_HOST_ECAM is not set diff --git a/baseconfig/arm/arm64/CONFIG_NET_VENDOR_SNI b/baseconfig/arm/arm64/CONFIG_NET_VENDOR_SNI new file mode 100644 index 000000000..bb77206de --- /dev/null +++ b/baseconfig/arm/arm64/CONFIG_NET_VENDOR_SNI @@ -0,0 +1 @@ +CONFIG_NET_VENDOR_SNI=y diff --git a/baseconfig/arm/arm64/CONFIG_PCIE_DW_HOST_ECAM b/baseconfig/arm/arm64/CONFIG_PCIE_DW_HOST_ECAM new file mode 100644 index 000000000..cdb6169bd --- /dev/null +++ b/baseconfig/arm/arm64/CONFIG_PCIE_DW_HOST_ECAM @@ -0,0 +1 @@ +CONFIG_PCIE_DW_HOST_ECAM=y diff --git a/baseconfig/arm/arm64/CONFIG_SNI_NETSEC b/baseconfig/arm/arm64/CONFIG_SNI_NETSEC new file mode 100644 index 000000000..c348519ff --- /dev/null +++ b/baseconfig/arm/arm64/CONFIG_SNI_NETSEC @@ -0,0 +1 @@ +CONFIG_SNI_NETSEC=m diff --git a/baseconfig/arm/arm64/CONFIG_SOCIONEXT_SYNQUACER_PREITS b/baseconfig/arm/arm64/CONFIG_SOCIONEXT_SYNQUACER_PREITS new file mode 100644 index 000000000..ded5c358e --- /dev/null +++ b/baseconfig/arm/arm64/CONFIG_SOCIONEXT_SYNQUACER_PREITS @@ -0,0 +1 @@ +CONFIG_SOCIONEXT_SYNQUACER_PREITS=y diff --git a/kernel-aarch64-debug.config b/kernel-aarch64-debug.config index 223b27246..ad0eaf138 100644 --- a/kernel-aarch64-debug.config +++ b/kernel-aarch64-debug.config @@ -3598,6 +3598,7 @@ CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SILAN=y CONFIG_NET_VENDOR_SIS=y CONFIG_NET_VENDOR_SMSC=y +CONFIG_NET_VENDOR_SNI=y # CONFIG_NET_VENDOR_SOLARFLARE is not set CONFIG_NET_VENDOR_STMICRO=y # CONFIG_NET_VENDOR_SUN is not set @@ -3976,6 +3977,7 @@ CONFIG_PCIE_ARMADA_8K=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM=y CONFIG_PCIE_DPC=y +CONFIG_PCIE_DW_HOST_ECAM=y CONFIG_PCIE_DW_HOST=y # CONFIG_PCIE_DW_PLAT is not set CONFIG_PCIE_DW=y @@ -5385,8 +5387,10 @@ CONFIG_SND_VIRMIDI=m CONFIG_SND_VIRTUOSO=m CONFIG_SND_VX222=m CONFIG_SND_YMFPCI=m +CONFIG_SNI_NETSEC=m # CONFIG_SOC_BRCMSTB is not set # CONFIG_SOC_CAMERA is not set +CONFIG_SOCIONEXT_SYNQUACER_PREITS=y CONFIG_SOC_TEGRA_FLOWCTRL=y # CONFIG_SOC_TI is not set # CONFIG_SOC_ZTE is not set diff --git a/kernel-aarch64.config b/kernel-aarch64.config index 3b6e12985..18ecfca1b 100644 --- a/kernel-aarch64.config +++ b/kernel-aarch64.config @@ -3577,6 +3577,7 @@ CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SILAN=y CONFIG_NET_VENDOR_SIS=y CONFIG_NET_VENDOR_SMSC=y +CONFIG_NET_VENDOR_SNI=y # CONFIG_NET_VENDOR_SOLARFLARE is not set CONFIG_NET_VENDOR_STMICRO=y # CONFIG_NET_VENDOR_SUN is not set @@ -3955,6 +3956,7 @@ CONFIG_PCIE_ARMADA_8K=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM=y CONFIG_PCIE_DPC=y +CONFIG_PCIE_DW_HOST_ECAM=y CONFIG_PCIE_DW_HOST=y # CONFIG_PCIE_DW_PLAT is not set CONFIG_PCIE_DW=y @@ -5362,8 +5364,10 @@ CONFIG_SND_VIRMIDI=m CONFIG_SND_VIRTUOSO=m CONFIG_SND_VX222=m CONFIG_SND_YMFPCI=m +CONFIG_SNI_NETSEC=m # CONFIG_SOC_BRCMSTB is not set # CONFIG_SOC_CAMERA is not set +CONFIG_SOCIONEXT_SYNQUACER_PREITS=y CONFIG_SOC_TEGRA_FLOWCTRL=y # CONFIG_SOC_TI is not set # CONFIG_SOC_ZTE is not set diff --git a/kernel-armv7hl-debug.config b/kernel-armv7hl-debug.config index 705c16ab6..1d59ea566 100644 --- a/kernel-armv7hl-debug.config +++ b/kernel-armv7hl-debug.config @@ -3846,6 +3846,7 @@ CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SILAN=y CONFIG_NET_VENDOR_SIS=y CONFIG_NET_VENDOR_SMSC=y +# CONFIG_NET_VENDOR_SNI is not set # CONFIG_NET_VENDOR_SOLARFLARE is not set CONFIG_NET_VENDOR_STMICRO=y # CONFIG_NET_VENDOR_SUN is not set @@ -4267,6 +4268,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM=y CONFIG_PCIE_DPC=y +# CONFIG_PCIE_DW_HOST_ECAM is not set CONFIG_PCIE_DW_HOST=y # CONFIG_PCIE_DW_PLAT is not set CONFIG_PCIE_DW=y diff --git a/kernel-armv7hl-lpae-debug.config b/kernel-armv7hl-lpae-debug.config index fb2966698..ae29ac079 100644 --- a/kernel-armv7hl-lpae-debug.config +++ b/kernel-armv7hl-lpae-debug.config @@ -3669,6 +3669,7 @@ CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SILAN=y CONFIG_NET_VENDOR_SIS=y CONFIG_NET_VENDOR_SMSC=y +# CONFIG_NET_VENDOR_SNI is not set # CONFIG_NET_VENDOR_SOLARFLARE is not set CONFIG_NET_VENDOR_STMICRO=y # CONFIG_NET_VENDOR_SUN is not set @@ -4048,6 +4049,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM=y CONFIG_PCIE_DPC=y +# CONFIG_PCIE_DW_HOST_ECAM is not set CONFIG_PCIE_DW_HOST=y # CONFIG_PCIE_DW_PLAT is not set CONFIG_PCIE_DW=y diff --git a/kernel-armv7hl-lpae.config b/kernel-armv7hl-lpae.config index f8de396d8..640fea8bf 100644 --- a/kernel-armv7hl-lpae.config +++ b/kernel-armv7hl-lpae.config @@ -3648,6 +3648,7 @@ CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SILAN=y CONFIG_NET_VENDOR_SIS=y CONFIG_NET_VENDOR_SMSC=y +# CONFIG_NET_VENDOR_SNI is not set # CONFIG_NET_VENDOR_SOLARFLARE is not set CONFIG_NET_VENDOR_STMICRO=y # CONFIG_NET_VENDOR_SUN is not set @@ -4027,6 +4028,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM=y CONFIG_PCIE_DPC=y +# CONFIG_PCIE_DW_HOST_ECAM is not set CONFIG_PCIE_DW_HOST=y # CONFIG_PCIE_DW_PLAT is not set CONFIG_PCIE_DW=y diff --git a/kernel-armv7hl.config b/kernel-armv7hl.config index d5aeda847..500782bb0 100644 --- a/kernel-armv7hl.config +++ b/kernel-armv7hl.config @@ -3825,6 +3825,7 @@ CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SILAN=y CONFIG_NET_VENDOR_SIS=y CONFIG_NET_VENDOR_SMSC=y +# CONFIG_NET_VENDOR_SNI is not set # CONFIG_NET_VENDOR_SOLARFLARE is not set CONFIG_NET_VENDOR_STMICRO=y # CONFIG_NET_VENDOR_SUN is not set @@ -4246,6 +4247,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM=y CONFIG_PCIE_DPC=y +# CONFIG_PCIE_DW_HOST_ECAM is not set CONFIG_PCIE_DW_HOST=y # CONFIG_PCIE_DW_PLAT is not set CONFIG_PCIE_DW=y diff --git a/kernel-i686-PAE.config b/kernel-i686-PAE.config index 15d453c14..20436bd53 100644 --- a/kernel-i686-PAE.config +++ b/kernel-i686-PAE.config @@ -3459,6 +3459,7 @@ CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SILAN=y CONFIG_NET_VENDOR_SIS=y CONFIG_NET_VENDOR_SMSC=y +# CONFIG_NET_VENDOR_SNI is not set CONFIG_NET_VENDOR_SOLARFLARE=y CONFIG_NET_VENDOR_STMICRO=y CONFIG_NET_VENDOR_SUN=y @@ -3842,6 +3843,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM=y CONFIG_PCIE_DPC=y +# CONFIG_PCIE_DW_HOST_ECAM is not set # CONFIG_PCIE_DW_PLAT is not set CONFIG_PCIE_ECRC=y # CONFIG_PCI_ENDPOINT is not set diff --git a/kernel-i686-PAEdebug.config b/kernel-i686-PAEdebug.config index c1088ee60..6593ef61f 100644 --- a/kernel-i686-PAEdebug.config +++ b/kernel-i686-PAEdebug.config @@ -3479,6 +3479,7 @@ CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SILAN=y CONFIG_NET_VENDOR_SIS=y CONFIG_NET_VENDOR_SMSC=y +# CONFIG_NET_VENDOR_SNI is not set CONFIG_NET_VENDOR_SOLARFLARE=y CONFIG_NET_VENDOR_STMICRO=y CONFIG_NET_VENDOR_SUN=y @@ -3862,6 +3863,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM=y CONFIG_PCIE_DPC=y +# CONFIG_PCIE_DW_HOST_ECAM is not set # CONFIG_PCIE_DW_PLAT is not set CONFIG_PCIE_ECRC=y # CONFIG_PCI_ENDPOINT is not set diff --git a/kernel-i686-debug.config b/kernel-i686-debug.config index c3743d60c..20e36d0fa 100644 --- a/kernel-i686-debug.config +++ b/kernel-i686-debug.config @@ -3479,6 +3479,7 @@ CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SILAN=y CONFIG_NET_VENDOR_SIS=y CONFIG_NET_VENDOR_SMSC=y +# CONFIG_NET_VENDOR_SNI is not set CONFIG_NET_VENDOR_SOLARFLARE=y CONFIG_NET_VENDOR_STMICRO=y CONFIG_NET_VENDOR_SUN=y @@ -3862,6 +3863,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM=y CONFIG_PCIE_DPC=y +# CONFIG_PCIE_DW_HOST_ECAM is not set # CONFIG_PCIE_DW_PLAT is not set CONFIG_PCIE_ECRC=y # CONFIG_PCI_ENDPOINT is not set diff --git a/kernel-i686.config b/kernel-i686.config index 2805e9354..5a0c7e842 100644 --- a/kernel-i686.config +++ b/kernel-i686.config @@ -3459,6 +3459,7 @@ CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SILAN=y CONFIG_NET_VENDOR_SIS=y CONFIG_NET_VENDOR_SMSC=y +# CONFIG_NET_VENDOR_SNI is not set CONFIG_NET_VENDOR_SOLARFLARE=y CONFIG_NET_VENDOR_STMICRO=y CONFIG_NET_VENDOR_SUN=y @@ -3842,6 +3843,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM=y CONFIG_PCIE_DPC=y +# CONFIG_PCIE_DW_HOST_ECAM is not set # CONFIG_PCIE_DW_PLAT is not set CONFIG_PCIE_ECRC=y # CONFIG_PCI_ENDPOINT is not set diff --git a/kernel-ppc64-debug.config b/kernel-ppc64-debug.config index 54081d19d..fe229273c 100644 --- a/kernel-ppc64-debug.config +++ b/kernel-ppc64-debug.config @@ -3304,6 +3304,7 @@ CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SILAN=y CONFIG_NET_VENDOR_SIS=y CONFIG_NET_VENDOR_SMSC=y +# CONFIG_NET_VENDOR_SNI is not set # CONFIG_NET_VENDOR_SOLARFLARE is not set CONFIG_NET_VENDOR_STMICRO=y CONFIG_NET_VENDOR_SUN=y @@ -3663,6 +3664,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM=y CONFIG_PCIE_DPC=y +# CONFIG_PCIE_DW_HOST_ECAM is not set # CONFIG_PCIE_DW_PLAT is not set CONFIG_PCIE_ECRC=y # CONFIG_PCI_ENDPOINT is not set diff --git a/kernel-ppc64.config b/kernel-ppc64.config index 7ea765679..fb4aeb5a6 100644 --- a/kernel-ppc64.config +++ b/kernel-ppc64.config @@ -3282,6 +3282,7 @@ CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SILAN=y CONFIG_NET_VENDOR_SIS=y CONFIG_NET_VENDOR_SMSC=y +# CONFIG_NET_VENDOR_SNI is not set # CONFIG_NET_VENDOR_SOLARFLARE is not set CONFIG_NET_VENDOR_STMICRO=y CONFIG_NET_VENDOR_SUN=y @@ -3641,6 +3642,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM=y CONFIG_PCIE_DPC=y +# CONFIG_PCIE_DW_HOST_ECAM is not set # CONFIG_PCIE_DW_PLAT is not set CONFIG_PCIE_ECRC=y # CONFIG_PCI_ENDPOINT is not set diff --git a/kernel-ppc64le-debug.config b/kernel-ppc64le-debug.config index 85b2347b2..6d4e8139f 100644 --- a/kernel-ppc64le-debug.config +++ b/kernel-ppc64le-debug.config @@ -3248,6 +3248,7 @@ CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SILAN=y CONFIG_NET_VENDOR_SIS=y CONFIG_NET_VENDOR_SMSC=y +# CONFIG_NET_VENDOR_SNI is not set # CONFIG_NET_VENDOR_SOLARFLARE is not set CONFIG_NET_VENDOR_STMICRO=y CONFIG_NET_VENDOR_SUN=y @@ -3605,6 +3606,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM=y CONFIG_PCIE_DPC=y +# CONFIG_PCIE_DW_HOST_ECAM is not set # CONFIG_PCIE_DW_PLAT is not set CONFIG_PCIE_ECRC=y # CONFIG_PCI_ENDPOINT is not set diff --git a/kernel-ppc64le.config b/kernel-ppc64le.config index c12b67f58..eb2654d36 100644 --- a/kernel-ppc64le.config +++ b/kernel-ppc64le.config @@ -3226,6 +3226,7 @@ CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SILAN=y CONFIG_NET_VENDOR_SIS=y CONFIG_NET_VENDOR_SMSC=y +# CONFIG_NET_VENDOR_SNI is not set # CONFIG_NET_VENDOR_SOLARFLARE is not set CONFIG_NET_VENDOR_STMICRO=y CONFIG_NET_VENDOR_SUN=y @@ -3583,6 +3584,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM=y CONFIG_PCIE_DPC=y +# CONFIG_PCIE_DW_HOST_ECAM is not set # CONFIG_PCIE_DW_PLAT is not set CONFIG_PCIE_ECRC=y # CONFIG_PCI_ENDPOINT is not set diff --git a/kernel-s390x-debug.config b/kernel-s390x-debug.config index 917bde643..2ee6a10b1 100644 --- a/kernel-s390x-debug.config +++ b/kernel-s390x-debug.config @@ -3183,6 +3183,7 @@ CONFIG_NET_VENDOR_AQUANTIA=y # CONFIG_NET_VENDOR_SILAN is not set # CONFIG_NET_VENDOR_SIS is not set # CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_SNI is not set # CONFIG_NET_VENDOR_SOLARFLARE is not set # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_SUN is not set @@ -3536,6 +3537,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM=y CONFIG_PCIE_DPC=y +# CONFIG_PCIE_DW_HOST_ECAM is not set # CONFIG_PCIE_DW_PLAT is not set CONFIG_PCIE_ECRC=y # CONFIG_PCI_ENDPOINT is not set diff --git a/kernel-s390x.config b/kernel-s390x.config index 0f2556742..b30fbd662 100644 --- a/kernel-s390x.config +++ b/kernel-s390x.config @@ -3161,6 +3161,7 @@ CONFIG_NET_VENDOR_AQUANTIA=y # CONFIG_NET_VENDOR_SILAN is not set # CONFIG_NET_VENDOR_SIS is not set # CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_SNI is not set # CONFIG_NET_VENDOR_SOLARFLARE is not set # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_SUN is not set @@ -3514,6 +3515,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM=y CONFIG_PCIE_DPC=y +# CONFIG_PCIE_DW_HOST_ECAM is not set # CONFIG_PCIE_DW_PLAT is not set CONFIG_PCIE_ECRC=y # CONFIG_PCI_ENDPOINT is not set diff --git a/kernel-x86_64-debug.config b/kernel-x86_64-debug.config index f3a380f12..a51eac9b6 100644 --- a/kernel-x86_64-debug.config +++ b/kernel-x86_64-debug.config @@ -3521,6 +3521,7 @@ CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SILAN=y CONFIG_NET_VENDOR_SIS=y CONFIG_NET_VENDOR_SMSC=y +# CONFIG_NET_VENDOR_SNI is not set CONFIG_NET_VENDOR_SOLARFLARE=y CONFIG_NET_VENDOR_STMICRO=y CONFIG_NET_VENDOR_SUN=y @@ -3910,6 +3911,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM=y CONFIG_PCIE_DPC=y +# CONFIG_PCIE_DW_HOST_ECAM is not set # CONFIG_PCIE_DW_PLAT is not set CONFIG_PCIE_ECRC=y # CONFIG_PCI_ENDPOINT is not set diff --git a/kernel-x86_64.config b/kernel-x86_64.config index 2e278492f..03d6474da 100644 --- a/kernel-x86_64.config +++ b/kernel-x86_64.config @@ -3501,6 +3501,7 @@ CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SILAN=y CONFIG_NET_VENDOR_SIS=y CONFIG_NET_VENDOR_SMSC=y +# CONFIG_NET_VENDOR_SNI is not set CONFIG_NET_VENDOR_SOLARFLARE=y CONFIG_NET_VENDOR_STMICRO=y CONFIG_NET_VENDOR_SUN=y @@ -3890,6 +3891,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM=y CONFIG_PCIE_DPC=y +# CONFIG_PCIE_DW_HOST_ECAM is not set # CONFIG_PCIE_DW_PLAT is not set CONFIG_PCIE_ECRC=y # CONFIG_PCI_ENDPOINT is not set diff --git a/kernel.spec b/kernel.spec index d4a9985ec..59ca498af 100644 --- a/kernel.spec +++ b/kernel.spec @@ -617,6 +617,13 @@ Patch321: bcm283x-dma-mapping-skip-USB-devices-when-configuring-DMA-during-probe # Patch323: bcm2837-bluetooth-support.patch +# Generic fixes and enablement for Socionext SoC and 96board +# https://patchwork.kernel.org/patch/9980861/ +Patch331: PCI-aspm-deal-with-missing-root-ports-in-link-state-handling.patch + +# https://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux.git/log/?h=synquacer-netsec +Patch332: arm64-socionext-96b-enablement.patch + # 400 - IBM (ppc/s390x) patches # 500 - Temp fixes/CVEs etc @@ -2190,6 +2197,9 @@ fi # # %changelog +* Fri Oct 6 2017 Peter Robinson <pbrobinson@fedoraproject.org> +- Initial support for Socionext Synquacer platform + * Thu Oct 05 2017 Justin M. Forbes <jforbes@fedoraproject.org> - 4.14.0-0.rc3.git3.1 - Linux v4.14-rc3-315-g0f380715e51f |