summaryrefslogtreecommitdiffstats
path: root/kernel.spec
diff options
context:
space:
mode:
authorJesse Keating <jkeating@redhat.com>2010-07-29 16:46:31 -0700
committerJesse Keating <jkeating@redhat.com>2010-07-29 16:46:31 -0700
commit7a32965a104c3363e8505fe566531fcf071cced7 (patch)
treee45cb84552b2b022f49047bbddd9d887753c35bc /kernel.spec
parent64ba2e5ffde5f2418eb26c700cb0ab62b04e5013 (diff)
downloadkernel-7a32965a104c3363e8505fe566531fcf071cced7.tar.gz
kernel-7a32965a104c3363e8505fe566531fcf071cced7.tar.xz
kernel-7a32965a104c3363e8505fe566531fcf071cced7.zip
initial srpm import
Diffstat (limited to 'kernel.spec')
-rw-r--r--kernel.spec2195
1 files changed, 2195 insertions, 0 deletions
diff --git a/kernel.spec b/kernel.spec
new file mode 100644
index 000000000..2f7fe1f9e
--- /dev/null
+++ b/kernel.spec
@@ -0,0 +1,2195 @@
+# We have to override the new %%install behavior because, well... the kernel is special.
+%global __spec_install_pre %{___build_pre}
+
+Summary: The Linux kernel
+
+# For a stable, released kernel, released_kernel should be 1. For rawhide
+# and/or a kernel built from an rc or git snapshot, released_kernel should
+# be 0.
+%global released_kernel 0
+
+# Save original buildid for later if it's defined
+%if 0%{?buildid:1}
+%global orig_buildid %{buildid}
+%undefine buildid
+%endif
+
+###################################################################
+# Polite request for people who spin their own kernel rpms:
+# please modify the "buildid" define in a way that identifies
+# that the kernel isn't the stock distribution kernel, for example,
+# by setting the define to ".local" or ".bz123456". This will be
+# appended to the full kernel version.
+#
+# (Uncomment the '#' and both spaces below to set the buildid.)
+#
+# % define buildid .local
+###################################################################
+
+# The buildid can also be specified on the rpmbuild command line
+# by adding --define="buildid .whatever". If both the specfile and
+# the environment define a buildid they will be concatenated together.
+%if 0%{?orig_buildid:1}
+%if 0%{?buildid:1}
+%global srpm_buildid %{buildid}
+%define buildid %{srpm_buildid}%{orig_buildid}
+%else
+%define buildid %{orig_buildid}
+%endif
+%endif
+
+# fedora_build defines which build revision of this kernel version we're
+# building. Rather than incrementing forever, as with the prior versioning
+# setup, we set fedora_cvs_origin to the current cvs revision s/1.// of the
+# kernel spec when the kernel is rebased, so fedora_build automatically
+# works out to the offset from the rebase, so it doesn't get too ginormous.
+#
+# If you're building on a branch, the RCS revision will be something like
+# 1.1205.1.1. In this case we drop the initial 1, subtract fedora_cvs_origin
+# from the second number, and then append the rest of the RCS string as is.
+# Don't stare at the awk too long, you'll go blind.
+%define fedora_cvs_origin 2037
+%define fedora_cvs_revision() %2
+%global fedora_build %(echo %{fedora_cvs_origin}.%{fedora_cvs_revision $Revision: 1.2094 $} | awk -F . '{ OFS = "."; ORS = ""; print $3 - $1 ; i = 4 ; OFS = ""; while (i <= NF) { print ".", $i ; i++} }')
+
+# base_sublevel is the kernel version we're starting with and patching
+# on top of -- for example, 2.6.22-rc7-git1 starts with a 2.6.21 base,
+# which yields a base_sublevel of 21.
+%define base_sublevel 34
+
+## If this is a released kernel ##
+%if 0%{?released_kernel}
+
+# Do we have a -stable update to apply?
+%define stable_update 0
+# Is it a -stable RC?
+%define stable_rc 0
+# Set rpm version accordingly
+%if 0%{?stable_update}
+%define stablerev .%{stable_update}
+%define stable_base %{stable_update}
+%if 0%{?stable_rc}
+# stable RCs are incremental patches, so we need the previous stable patch
+%define stable_base %(echo $((%{stable_update} - 1)))
+%endif
+%endif
+%define rpmversion 2.6.%{base_sublevel}%{?stablerev}
+
+## The not-released-kernel case ##
+%else
+# The next upstream release sublevel (base_sublevel+1)
+%define upstream_sublevel %(echo $((%{base_sublevel} + 1)))
+# The rc snapshot level
+%define rcrev 6
+# The git snapshot level
+%define gitrev 1
+# Set rpm version accordingly
+%define rpmversion 2.6.%{upstream_sublevel}
+%endif
+# Nb: The above rcrev and gitrev values automagically define Patch00 and Patch01 below.
+
+# What parts do we want to build? We must build at least one kernel.
+# These are the kernels that are built IF the architecture allows it.
+# All should default to 1 (enabled) and be flipped to 0 (disabled)
+# by later arch-specific checks.
+
+# The following build options are enabled by default.
+# Use either --without <opt> in your rpmbuild command or force values
+# to 0 in here to disable them.
+#
+# standard kernel
+%define with_up %{?_without_up: 0} %{?!_without_up: 1}
+# kernel-smp (only valid for ppc 32-bit)
+%define with_smp %{?_without_smp: 0} %{?!_without_smp: 1}
+# kernel-debug
+%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
+# kernel-doc
+%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
+# kernel-headers
+%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
+# kernel-firmware
+%define with_firmware %{?_with_firmware: 1} %{?!_with_firmware: 0}
+# tools/perf
+%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
+# kernel-debuginfo
+%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
+# kernel-bootwrapper (for creating zImages from kernel + initrd)
+%define with_bootwrapper %{?_without_bootwrapper: 0} %{?!_without_bootwrapper: 1}
+# Want to build a the vsdo directories installed
+%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
+
+# Build the kernel-doc package, but don't fail the build if it botches.
+# Here "true" means "continue" and "false" means "fail the build".
+%if 0%{?released_kernel}
+%define doc_build_fail false
+%else
+%define doc_build_fail true
+%endif
+
+%define rawhide_skip_docs 1
+%if 0%{?rawhide_skip_docs}
+%define with_doc 0
+%define doc_build_fail true
+%endif
+
+# Additional options for user-friendly one-off kernel building:
+#
+# Only build the base kernel (--with baseonly):
+%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
+# Only build the smp kernel (--with smponly):
+%define with_smponly %{?_with_smponly: 1} %{?!_with_smponly: 0}
+# Only build the debug kernel (--with dbgonly):
+%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
+
+# should we do C=1 builds with sparse
+%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
+
+# Set debugbuildsenabled to 1 for production (build separate debug kernels)
+# and 0 for rawhide (all kernels are debug kernels).
+# See also 'make debug' and 'make release'.
+%define debugbuildsenabled 0
+
+# Want to build a vanilla kernel build without any non-upstream patches?
+# (well, almost none, we need nonintconfig for build purposes). Default to 0 (off).
+%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
+
+# pkg_release is what we'll fill in for the rpm Release: field
+%if 0%{?released_kernel}
+
+%if 0%{?stable_rc}
+%define stable_rctag .rc%{stable_rc}
+%endif
+%define pkg_release %{fedora_build}%{?stable_rctag}%{?buildid}%{?dist}
+
+%else
+
+# non-released_kernel
+%if 0%{?rcrev}
+%define rctag .rc%rcrev
+%else
+%define rctag .rc0
+%endif
+%if 0%{?gitrev}
+%define gittag .git%gitrev
+%else
+%define gittag .git0
+%endif
+%define pkg_release 0.%{fedora_build}%{?rctag}%{?gittag}%{?buildid}%{?dist}
+
+%endif
+
+# The kernel tarball/base version
+%define kversion 2.6.%{base_sublevel}
+
+%define make_target bzImage
+
+%define KVERREL %{version}-%{release}.%{_target_cpu}
+%define hdrarch %_target_cpu
+%define asmarch %_target_cpu
+
+%if 0%{!?nopatches:1}
+%define nopatches 0
+%endif
+
+%if %{with_vanilla}
+%define nopatches 1
+%endif
+
+%if %{nopatches}
+%define with_bootwrapper 0
+%define variant -vanilla
+%else
+%define variant_fedora -fedora
+%endif
+
+%define using_upstream_branch 0
+%if 0%{?upstream_branch:1}
+%define stable_update 0
+%define using_upstream_branch 1
+%define variant -%{upstream_branch}%{?variant_fedora}
+%define pkg_release 0.%{fedora_build}%{upstream_branch_tag}%{?buildid}%{?dist}
+%endif
+
+%if !%{debugbuildsenabled}
+%define with_debug 0
+%endif
+
+%if !%{with_debuginfo}
+%define _enable_debug_packages 0
+%endif
+%define debuginfodir /usr/lib/debug
+
+# kernel-PAE is only built on i686.
+%ifarch i686
+%define with_pae 1
+%else
+%define with_pae 0
+%endif
+
+# if requested, only build base kernel
+%if %{with_baseonly}
+%define with_smp 0
+%define with_debug 0
+%endif
+
+# if requested, only build smp kernel
+%if %{with_smponly}
+%define with_up 0
+%define with_debug 0
+%endif
+
+# if requested, only build debug kernel
+%if %{with_dbgonly}
+%if %{debugbuildsenabled}
+%define with_up 0
+%endif
+%define with_smp 0
+%define with_pae 0
+%define with_perf 0
+%endif
+
+%define all_x86 i386 i686
+
+%if %{with_vdso_install}
+# These arches install vdso/ directories.
+%define vdso_arches %{all_x86} x86_64 ppc ppc64
+%endif
+
+# Overrides for generic default options
+
+# only ppc and alphav56 need separate smp kernels
+%ifnarch ppc alphaev56
+%define with_smp 0
+%endif
+
+# don't do debug builds on anything but i686 and x86_64
+%ifnarch i686 x86_64
+%define with_debug 0
+%endif
+
+# only package docs noarch
+%ifnarch noarch
+%define with_doc 0
+%endif
+
+# don't build noarch kernels or headers (duh)
+%ifarch noarch
+%define with_up 0
+%define with_headers 0
+%define with_perf 0
+%define all_arch_configs kernel-%{version}-*.config
+%define with_firmware %{?_with_firmware: 1} %{?!_with_firmware: 0}
+%endif
+
+# bootwrapper is only on ppc
+%ifnarch ppc ppc64
+%define with_bootwrapper 0
+%endif
+
+# sparse blows up on ppc64 alpha and sparc64
+%ifarch ppc64 ppc alpha sparc64
+%define with_sparse 0
+%endif
+
+# Per-arch tweaks
+
+%ifarch %{all_x86}
+%define asmarch x86
+%define hdrarch i386
+%define all_arch_configs kernel-%{version}-i?86*.config
+%define image_install_path boot
+%define kernel_image arch/x86/boot/bzImage
+%endif
+
+%ifarch x86_64
+%define asmarch x86
+%define all_arch_configs kernel-%{version}-x86_64*.config
+%define image_install_path boot
+%define kernel_image arch/x86/boot/bzImage
+%endif
+
+%ifarch ppc64
+%define asmarch powerpc
+%define hdrarch powerpc
+%define all_arch_configs kernel-%{version}-ppc64*.config
+%define image_install_path boot
+%define make_target vmlinux
+%define kernel_image vmlinux
+%define kernel_image_elf 1
+%endif
+
+%ifarch s390x
+%define asmarch s390
+%define hdrarch s390
+%define all_arch_configs kernel-%{version}-s390x.config
+%define image_install_path boot
+%define make_target image
+%define kernel_image arch/s390/boot/image
+%endif
+
+%ifarch sparc64
+%define asmarch sparc
+%define all_arch_configs kernel-%{version}-sparc64*.config
+%define make_target image
+%define kernel_image arch/sparc/boot/image
+%define image_install_path boot
+%define with_perf 0
+%endif
+
+%ifarch ppc
+%define asmarch powerpc
+%define hdrarch powerpc
+%define all_arch_configs kernel-%{version}-ppc{-,.}*config
+%define image_install_path boot
+%define make_target vmlinux
+%define kernel_image vmlinux
+%define kernel_image_elf 1
+%endif
+
+%ifarch ia64
+%define all_arch_configs kernel-%{version}-ia64*.config
+%define image_install_path boot/efi/EFI/redhat
+%define make_target compressed
+%define kernel_image vmlinux.gz
+%endif
+
+%ifarch alpha alphaev56
+%define all_arch_configs kernel-%{version}-alpha*.config
+%define image_install_path boot
+%define make_target vmlinux
+%define kernel_image vmlinux
+%endif
+
+%ifarch %{arm}
+%define all_arch_configs kernel-%{version}-arm*.config
+%define image_install_path boot
+%define hdrarch arm
+%define make_target vmlinux
+%define kernel_image vmlinux
+%endif
+
+%if %{nopatches}
+# XXX temporary until last vdso patches are upstream
+%define vdso_arches ppc ppc64
+%endif
+
+%if %{nopatches}%{using_upstream_branch}
+# Ignore unknown options in our config-* files.
+# Some options go with patches we're not applying.
+%define oldconfig_target loose_nonint_oldconfig
+%else
+%define oldconfig_target nonint_oldconfig
+%endif
+
+# To temporarily exclude an architecture from being built, add it to
+# %nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
+# don't build kernel-headers then the new build system will no longer let
+# us use the previous build of that package -- it'll just be completely AWOL.
+# Which is a BadThing(tm).
+
+# We only build kernel-headers on the following...
+%define nobuildarches i386 s390 sparc %{arm}
+
+%ifarch %nobuildarches
+%define with_up 0
+%define with_smp 0
+%define with_pae 0
+%define with_debuginfo 0
+%define with_perf 0
+%define _enable_debug_packages 0
+%endif
+
+%define with_pae_debug 0
+%if %{with_pae}
+%define with_pae_debug %{with_debug}
+%endif
+
+#
+# Three sets of minimum package version requirements in the form of Conflicts:
+# to versions below the minimum
+#
+
+#
+# First the general kernel 2.6 required versions as per
+# Documentation/Changes
+#
+%define kernel_dot_org_conflicts ppp < 2.4.3-3, isdn4k-utils < 3.2-32, nfs-utils < 1.0.7-12, e2fsprogs < 1.37-4, util-linux < 2.12, jfsutils < 1.1.7-2, reiserfs-utils < 3.6.19-2, xfsprogs < 2.6.13-4, procps < 3.2.5-6.3, oprofile < 0.9.1-2
+
+#
+# Then a series of requirements that are distribution specific, either
+# because we add patches for something, or the older versions have
+# problems with the newer kernel or lack certain things that make
+# integration in the distro harder than needed.
+#
+%define package_conflicts initscripts < 7.23, udev < 063-6, iptables < 1.3.2-1, ipw2200-firmware < 2.4, iwl4965-firmware < 228.57.2, selinux-policy-targeted < 1.25.3-14, squashfs-tools < 4.0, wireless-tools < 29-3
+
+# We moved the drm include files into kernel-headers, make sure there's
+# a recent enough libdrm-devel on the system that doesn't have those.
+%define kernel_headers_conflicts libdrm-devel < 2.4.0-0.15
+
+#
+# Packages that need to be installed before the kernel is, because the %post
+# scripts use them.
+#
+%define kernel_prereq fileutils, module-init-tools, initscripts >= 8.11.1-1, grubby >= 7.0.10-1
+%define initrd_prereq dracut >= 001-7
+
+#
+# This macro does requires, provides, conflicts, obsoletes for a kernel package.
+# %%kernel_reqprovconf <subpackage>
+# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
+# macros defined above.
+#
+%define kernel_reqprovconf \
+Provides: kernel = %{rpmversion}-%{pkg_release}\
+Provides: kernel-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:.%{1}}\
+Provides: kernel-drm = 4.3.0\
+Provides: kernel-drm-nouveau = 16\
+Provides: kernel-modeset = 1\
+Provides: kernel-uname-r = %{KVERREL}%{?1:.%{1}}\
+Requires(pre): %{kernel_prereq}\
+Requires(pre): %{initrd_prereq}\
+%if %{with_firmware}\
+Requires(pre): kernel-firmware >= %{rpmversion}-%{pkg_release}\
+%else\
+Requires(pre): linux-firmware\
+%endif\
+Requires(post): /sbin/new-kernel-pkg\
+Requires(preun): /sbin/new-kernel-pkg\
+Conflicts: %{kernel_dot_org_conflicts}\
+Conflicts: %{package_conflicts}\
+%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
+%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
+%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
+# We can't let RPM do the dependencies automatic because it'll then pick up\
+# a correct but undesirable perl dependency from the module headers which\
+# isn't required for the kernel proper to function\
+AutoReq: no\
+AutoProv: yes\
+%{nil}
+
+Name: kernel%{?variant}
+Group: System Environment/Kernel
+License: GPLv2
+URL: http://www.kernel.org/
+Version: %{rpmversion}
+Release: %{pkg_release}
+# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
+# SET %%nobuildarches (ABOVE) INSTEAD
+ExclusiveArch: noarch %{all_x86} x86_64 ppc ppc64 ia64 sparc sparc64 s390 s390x alpha alphaev56 %{arm}
+ExclusiveOS: Linux
+
+%kernel_reqprovconf
+%ifarch x86_64 sparc64
+Obsoletes: kernel-smp
+%endif
+
+
+#
+# List the packages used during the kernel build
+#
+BuildRequires: module-init-tools, patch >= 2.5.4, bash >= 2.03, sh-utils, tar
+BuildRequires: bzip2, findutils, gzip, m4, perl, make >= 3.78, diffutils, gawk
+BuildRequires: gcc >= 3.4.2, binutils >= 2.12, redhat-rpm-config
+BuildRequires: net-tools
+BuildRequires: xmlto, asciidoc
+%if %{with_sparse}
+BuildRequires: sparse >= 0.4.1
+%endif
+%if %{with_perf}
+BuildRequires: elfutils-devel zlib-devel binutils-devel
+%endif
+BuildConflicts: rhbuildsys(DiskFree) < 500Mb
+
+%define fancy_debuginfo 0
+%if %{with_debuginfo}
+%if 0%{?fedora} >= 8 || 0%{?rhel} >= 6
+%define fancy_debuginfo 1
+%endif
+%endif
+
+%if %{fancy_debuginfo}
+# Fancy new debuginfo generation introduced in Fedora 8.
+BuildRequires: rpm-build >= 4.4.2.1-4
+%define debuginfo_args --strict-build-id
+%endif
+
+Source0: ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-%{kversion}.tar.bz2
+
+Source11: genkey
+Source14: find-provides
+Source15: merge.pl
+
+Source20: Makefile.config
+Source21: config-debug
+Source22: config-nodebug
+Source23: config-generic
+Source24: config-rhel-generic
+
+Source30: config-x86-generic
+Source31: config-i686-PAE
+
+Source40: config-x86_64-generic
+
+Source50: config-powerpc-generic
+Source51: config-powerpc32-generic
+Source52: config-powerpc32-smp
+Source53: config-powerpc64
+
+Source60: config-ia64-generic
+
+Source70: config-s390x
+
+Source90: config-sparc64-generic
+
+Source100: config-arm
+
+# Here should be only the patches up to the upstream canonical Linus tree.
+
+# For a stable release kernel
+%if 0%{?stable_update}
+%if 0%{?stable_base}
+%define stable_patch_00 patch-2.6.%{base_sublevel}.%{stable_base}.bz2
+Patch00: %{stable_patch_00}
+%endif
+%if 0%{?stable_rc}
+%define stable_patch_01 patch-2.6.%{base_sublevel}.%{stable_update}-rc%{stable_rc}.bz2
+Patch01: %{stable_patch_01}
+%endif
+
+# non-released_kernel case
+# These are automagically defined by the rcrev and gitrev values set up
+# near the top of this spec file.
+%else
+%if 0%{?rcrev}
+Patch00: patch-2.6.%{upstream_sublevel}-rc%{rcrev}.bz2
+%if 0%{?gitrev}
+Patch01: patch-2.6.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.bz2
+%endif
+%else
+# pre-{base_sublevel+1}-rc1 case
+%if 0%{?gitrev}
+Patch00: patch-2.6.%{base_sublevel}-git%{gitrev}.bz2
+%endif
+%endif
+%endif
+
+%if %{using_upstream_branch}
+### BRANCH PATCH ###
+%endif
+
+Patch02: git-linus.diff
+
+# we always need nonintconfig, even for -vanilla kernels
+Patch03: linux-2.6-build-nonintconfig.patch
+
+# we also need compile fixes for -vanilla
+Patch04: linux-2.6-compile-fixes.patch
+
+# build tweak for build ID magic, even for -vanilla
+Patch05: linux-2.6-makefile-after_link.patch
+
+%if !%{nopatches}
+
+# revert upstream patches we get via other methods
+Patch09: linux-2.6-upstream-reverts.patch
+# Git trees.
+
+# Standalone patches
+Patch20: linux-2.6-hotfixes.patch
+
+Patch30: git-utrace.patch
+Patch31: utrace-ptrace-fix-build.patch
+Patch32: utrace-remove-use-of-kref_set.patch
+
+Patch150: linux-2.6.29-sparc-IOC_TYPECHECK.patch
+
+Patch160: linux-2.6-32bit-mmap-exec-randomization.patch
+Patch161: linux-2.6-i386-nx-emulation.patch
+
+Patch200: linux-2.6-debug-sizeof-structs.patch
+Patch201: linux-2.6-debug-nmi-timeout.patch
+Patch202: linux-2.6-debug-taint-vm.patch
+Patch203: linux-2.6-debug-vm-would-have-oomkilled.patch
+Patch204: linux-2.6-debug-always-inline-kzalloc.patch
+
+Patch380: linux-2.6-defaults-pci_no_msi.patch
+Patch383: linux-2.6-defaults-aspm.patch
+Patch384: pci-acpi-disable-aspm-if-no-osc.patch
+Patch385: pci-aspm-dont-enable-too-early.patch
+
+Patch390: linux-2.6-defaults-acpi-video.patch
+Patch391: linux-2.6-acpi-video-dos.patch
+Patch393: acpi-ec-add-delay-before-write.patch
+Patch394: linux-2.6-acpi-debug-infinite-loop.patch
+
+Patch450: linux-2.6-input-kill-stupid-messages.patch
+Patch452: linux-2.6.30-no-pcspkr-modalias.patch
+Patch454: thinkpad-acpi-fix-backlight.patch
+
+Patch460: linux-2.6-serial-460800.patch
+
+Patch470: die-floppy-die.patch
+
+Patch510: linux-2.6-silence-noise.patch
+Patch530: linux-2.6-silence-fbcon-logo.patch
+Patch570: linux-2.6-selinux-mprotect-checks.patch
+Patch580: linux-2.6-sparc-selinux-mprotect-checks.patch
+
+Patch610: hda_intel-prealloc-4mb-dmabuffer.patch
+
+Patch800: linux-2.6-crash-driver.patch
+
+# crypto/
+
+# virt + ksm patches
+Patch1555: fix_xen_guest_on_old_EC2.patch
+
+# DRM
+Patch1801: drm-revert-drm-fbdev-rework-output-polling-to-be-back-in-core.patch
+Patch1802: revert-drm-kms-toggle-poll-around-switcheroo.patch
+# nouveau + drm fixes
+Patch1810: drm-nouveau-updates.patch
+Patch1819: drm-intel-big-hammer.patch
+# intel drm is all merged upstream
+Patch1824: drm-intel-next.patch
+# make sure the lvds comes back on lid open
+Patch1825: drm-intel-make-lvds-work.patch
+Patch1900: linux-2.6-intel-iommu-igfx.patch
+
+# linux1394 git patches
+Patch2200: linux-2.6-firewire-git-update.patch
+Patch2201: linux-2.6-firewire-git-pending.patch
+
+# Quiet boot fixes
+# silence the ACPI blacklist code
+Patch2802: linux-2.6-silence-acpi-blacklist.patch
+
+# media patches
+Patch2899: linux-2.6-v4l-dvb-fixes.patch
+Patch2900: linux-2.6-v4l-dvb-update.patch
+Patch2901: linux-2.6-v4l-dvb-experimental.patch
+Patch2902: linux-2.6-v4l-dvb-uvcvideo-update.patch
+
+Patch2910: linux-2.6-v4l-dvb-add-lgdt3304-support.patch
+Patch2911: linux-2.6-v4l-dvb-add-kworld-a340-support.patch
+Patch2912: linux-2.6-v4l-dvb-ir-core-update.patch
+
+Patch2915: lirc-staging-2.6.36.patch
+#Patch2916: lirc-staging-2.6.36-fixes.patch
+Patch2917: hdpvr-ir-enable.patch
+
+# fs fixes
+Patch3000: linux-2.6-ext4-fix-freeze-deadlock.patch
+
+# NFSv4
+
+# VIA Nano / VX8xx updates
+
+# patches headed upstream
+
+Patch12016: disable-i8042-check-on-apple-mac.patch
+
+Patch12017: prevent-runtime-conntrack-changes.patch
+
+Patch12018: neuter_intel_microcode_load.patch
+
+Patch12030: ssb_check_for_sprom.patch
+
+Patch12040: only-use-alpha2-regulatory-information-from-country-IE.patch
+
+%endif
+
+BuildRoot: %{_tmppath}/kernel-%{KVERREL}-root
+
+%description
+The kernel package contains the Linux kernel (vmlinuz), the core of any
+Linux operating system. The kernel handles the basic functions
+of the operating system: memory allocation, process allocation, device
+input and output, etc.
+
+
+%package doc
+Summary: Various documentation bits found in the kernel source
+Group: Documentation
+%description doc
+This package contains documentation files from the kernel
+source. Various bits of information about the Linux kernel and the
+device drivers shipped with it are documented in these files.
+
+You'll want to install this package if you need a reference to the
+options that can be passed to Linux kernel modules at load time.
+
+
+%package headers
+Summary: Header files for the Linux kernel for use by glibc
+Group: Development/System
+Obsoletes: glibc-kernheaders
+Provides: glibc-kernheaders = 3.0-46
+%description headers
+Kernel-headers includes the C header files that specify the interface
+between the Linux kernel and userspace libraries and programs. The
+header files define structures and constants that are needed for
+building most standard programs and are also needed for rebuilding the
+glibc package.
+
+%package firmware
+Summary: Firmware files used by the Linux kernel
+Group: Development/System
+# This is... complicated.
+# Look at the WHENCE file.
+License: GPL+ and GPLv2+ and MIT and Redistributable, no modification permitted
+%if "x%{?variant}" != "x"
+Provides: kernel-firmware = %{rpmversion}-%{pkg_release}
+%endif
+%description firmware
+Kernel-firmware includes firmware files required for some devices to
+operate.
+
+%package bootwrapper
+Summary: Boot wrapper files for generating combined kernel + initrd images
+Group: Development/System
+Requires: gzip
+%description bootwrapper
+Kernel-bootwrapper contains the wrapper code which makes bootable "zImage"
+files combining both kernel and initial ramdisk.
+
+%package debuginfo-common-%{_target_cpu}
+Summary: Kernel source files used by %{name}-debuginfo packages
+Group: Development/Debug
+%description debuginfo-common-%{_target_cpu}
+This package is required by %{name}-debuginfo subpackages.
+It provides the kernel source files common to all builds.
+
+%if %{with_perf}
+%package -n perf
+Summary: Performance monitoring for the Linux kernel
+Group: Development/System
+License: GPLv2
+%description -n perf
+This package provides the perf tool and the supporting documentation.
+%endif
+
+
+#
+# This macro creates a kernel-<subpackage>-debuginfo package.
+# %%kernel_debuginfo_package <subpackage>
+#
+%define kernel_debuginfo_package() \
+%package %{?1:%{1}-}debuginfo\
+Summary: Debug information for package %{name}%{?1:-%{1}}\
+Group: Development/Debug\
+Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
+Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
+AutoReqProv: no\
+%description -n %{name}%{?1:-%{1}}-debuginfo\
+This package provides debug information for package %{name}%{?1:-%{1}}.\
+This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
+%{expand:%%global debuginfo_args %{?debuginfo_args} -p '/.*/%%{KVERREL}%{?1:\.%{1}}/.*|/.*%%{KVERREL}%{?1:\.%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
+%{nil}
+
+#
+# This macro creates a kernel-<subpackage>-devel package.
+# %%kernel_devel_package <subpackage> <pretty-name>
+#
+%define kernel_devel_package() \
+%package %{?1:%{1}-}devel\
+Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
+Group: System Environment/Kernel\
+Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
+Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:.%{1}}\
+Provides: kernel-devel = %{version}-%{release}%{?1:.%{1}}\
+Provides: kernel-devel-uname-r = %{KVERREL}%{?1:.%{1}}\
+AutoReqProv: no\
+Requires(pre): /usr/bin/find\
+Requires: perl\
+%description -n kernel%{?variant}%{?1:-%{1}}-devel\
+This package provides kernel headers and makefiles sufficient to build modules\
+against the %{?2:%{2} }kernel package.\
+%{nil}
+
+#
+# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
+# %%define variant_summary The Linux kernel compiled for <configuration>
+# %%kernel_variant_package [-n <pretty-name>] <subpackage>
+#
+%define kernel_variant_package(n:) \
+%package %1\
+Summary: %{variant_summary}\
+Group: System Environment/Kernel\
+%kernel_reqprovconf\
+%{expand:%%kernel_devel_package %1 %{!?-n:%1}%{?-n:%{-n*}}}\
+%{expand:%%kernel_debuginfo_package %1}\
+%{nil}
+
+
+# First the auxiliary packages of the main kernel package.
+%kernel_devel_package
+%kernel_debuginfo_package
+
+
+# Now, each variant package.
+
+%define variant_summary The Linux kernel compiled for SMP machines
+%kernel_variant_package -n SMP smp
+%description smp
+This package includes a SMP version of the Linux kernel. It is
+required only on machines with two or more CPUs as well as machines with
+hyperthreading technology.
+
+Install the kernel-smp package if your machine uses two or more CPUs.
+
+
+%define variant_summary The Linux kernel compiled for PAE capable machines
+%kernel_variant_package PAE
+%description PAE
+This package includes a version of the Linux kernel with support for up to
+64GB of high memory. It requires a CPU with Physical Address Extensions (PAE).
+The non-PAE kernel can only address up to 4GB of memory.
+Install the kernel-PAE package if your machine has more than 4GB of memory.
+
+
+%define variant_summary The Linux kernel compiled with extra debugging enabled for PAE capable machines
+%kernel_variant_package PAEdebug
+Obsoletes: kernel-PAE-debug
+%description PAEdebug
+This package includes a version of the Linux kernel with support for up to
+64GB of high memory. It requires a CPU with Physical Address Extensions (PAE).
+The non-PAE kernel can only address up to 4GB of memory.
+Install the kernel-PAE package if your machine has more than 4GB of memory.
+
+This variant of the kernel has numerous debugging options enabled.
+It should only be installed when trying to gather additional information
+on kernel bugs, as some of these options impact performance noticably.
+
+
+%define variant_summary The Linux kernel compiled with extra debugging enabled
+%kernel_variant_package debug
+%description debug
+The kernel package contains the Linux kernel (vmlinuz), the core of any
+Linux operating system. The kernel handles the basic functions
+of the operating system: memory allocation, process allocation, device
+input and output, etc.
+
+This variant of the kernel has numerous debugging options enabled.
+It should only be installed when trying to gather additional information
+on kernel bugs, as some of these options impact performance noticably.
+
+
+%prep
+# do a few sanity-checks for --with *only builds
+%if %{with_baseonly}
+%if !%{with_up}%{with_pae}
+echo "Cannot build --with baseonly, up build is disabled"
+exit 1
+%endif
+%endif
+
+%if %{with_smponly}
+%if !%{with_smp}
+echo "Cannot build --with smponly, smp build is disabled"
+exit 1
+%endif
+%endif
+
+# more sanity checking; do it quietly
+if [ "%{patches}" != "%%{patches}" ] ; then
+ for patch in %{patches} ; do
+ if [ ! -f $patch ] ; then
+ echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
+ exit 1
+ fi
+ done
+fi 2>/dev/null
+
+patch_command='patch -p1 -F1 -s'
+ApplyPatch()
+{
+ local patch=$1
+ shift
+ if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
+ exit 1
+ fi
+%if !%{using_upstream_branch}
+ if ! egrep "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME%%%%%{?variant}}.spec ; then
+ if [ "${patch:0:10}" != "patch-2.6." ] ; then
+ echo "ERROR: Patch $patch not listed as a source patch in specfile"
+ exit 1
+ fi
+ fi 2>/dev/null
+%endif
+ case "$patch" in
+ *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
+ *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
+ *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
+ esac
+}
+
+# don't apply patch if it's empty
+ApplyOptionalPatch()
+{
+ local patch=$1
+ shift
+ if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
+ exit 1
+ fi
+ local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
+ if [ "$C" -gt 9 ]; then
+ ApplyPatch $patch ${1+"$@"}
+ fi
+}
+
+# we don't want a .config file when building firmware: it just confuses the build system
+%define build_firmware \
+ mv .config .config.firmware_save \
+ make INSTALL_FW_PATH=$RPM_BUILD_ROOT/lib/firmware firmware_install \
+ mv .config.firmware_save .config
+
+# First we unpack the kernel tarball.
+# If this isn't the first make prep, we use links to the existing clean tarball
+# which speeds things up quite a bit.
+
+# Update to latest upstream.
+%if 0%{?released_kernel}
+%define vanillaversion 2.6.%{base_sublevel}
+# non-released_kernel case
+%else
+%if 0%{?rcrev}
+%define vanillaversion 2.6.%{upstream_sublevel}-rc%{rcrev}
+%if 0%{?gitrev}
+%define vanillaversion 2.6.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}
+%endif
+%else
+# pre-{base_sublevel+1}-rc1 case
+%if 0%{?gitrev}
+%define vanillaversion 2.6.%{base_sublevel}-git%{gitrev}
+%else
+%define vanillaversion 2.6.%{base_sublevel}
+%endif
+%endif
+%endif
+
+# We can share hardlinked source trees by putting a list of
+# directory names of the CVS checkouts that we want to share
+# with in .shared-srctree. (Full pathnames are required.)
+[ -f .shared-srctree ] && sharedirs=$(cat .shared-srctree)
+
+if [ ! -d kernel-%{kversion}/vanilla-%{vanillaversion} ]; then
+
+ if [ -d kernel-%{kversion}/vanilla-%{kversion} ]; then
+
+ cd kernel-%{kversion}
+
+ # Any vanilla-* directories other than the base one are stale.
+ for dir in vanilla-*; do
+ [ "$dir" = vanilla-%{kversion} ] || rm -rf $dir &
+ done
+
+ else
+
+ # Ok, first time we do a make prep.
+ rm -f pax_global_header
+ for sharedir in $sharedirs ; do
+ if [[ ! -z $sharedir && -d $sharedir/kernel-%{kversion}/vanilla-%{kversion} ]] ; then
+ break
+ fi
+ done
+ if [[ ! -z $sharedir && -d $sharedir/kernel-%{kversion}/vanilla-%{kversion} ]] ; then
+%setup -q -n kernel-%{kversion} -c -T
+ cp -rl $sharedir/kernel-%{kversion}/vanilla-%{kversion} .
+ else
+%setup -q -n kernel-%{kversion} -c
+ mv linux-%{kversion} vanilla-%{kversion}
+ fi
+
+ fi
+
+%if "%{kversion}" != "%{vanillaversion}"
+
+ for sharedir in $sharedirs ; do
+ if [[ ! -z $sharedir && -d $sharedir/kernel-%{kversion}/vanilla-%{vanillaversion} ]] ; then
+ break
+ fi
+ done
+ if [[ ! -z $sharedir && -d $sharedir/kernel-%{kversion}/vanilla-%{vanillaversion} ]] ; then
+
+ cp -rl $sharedir/kernel-%{kversion}/vanilla-%{vanillaversion} .
+
+ else
+
+ cp -rl vanilla-%{kversion} vanilla-%{vanillaversion}
+ cd vanilla-%{vanillaversion}
+
+# Update vanilla to the latest upstream.
+# (non-released_kernel case only)
+%if 0%{?rcrev}
+ ApplyPatch patch-2.6.%{upstream_sublevel}-rc%{rcrev}.bz2
+%if 0%{?gitrev}
+ ApplyPatch patch-2.6.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.bz2
+%endif
+%else
+# pre-{base_sublevel+1}-rc1 case
+%if 0%{?gitrev}
+ ApplyPatch patch-2.6.%{base_sublevel}-git%{gitrev}.bz2
+%endif
+%endif
+
+ cd ..
+
+ fi
+
+%endif
+
+else
+ # We already have a vanilla dir.
+ cd kernel-%{kversion}
+fi
+
+if [ -d linux-%{kversion}.%{_target_cpu} ]; then
+ # Just in case we ctrl-c'd a prep already
+ rm -rf deleteme.%{_target_cpu}
+ # Move away the stale away, and delete in background.
+ mv linux-%{kversion}.%{_target_cpu} deleteme.%{_target_cpu}
+ rm -rf deleteme.%{_target_cpu} &
+fi
+
+cp -rl vanilla-%{vanillaversion} linux-%{kversion}.%{_target_cpu}
+
+cd linux-%{kversion}.%{_target_cpu}
+
+# released_kernel with possible stable updates
+%if 0%{?stable_base}
+ApplyPatch %{stable_patch_00}
+%endif
+%if 0%{?stable_rc}
+ApplyPatch %{stable_patch_01}
+%endif
+
+%if %{using_upstream_branch}
+### BRANCH APPLY ###
+%endif
+
+# Drop some necessary files from the source dir into the buildroot
+cp $RPM_SOURCE_DIR/config-* .
+cp %{SOURCE15} .
+
+# Dynamically generate kernel .config files from config-* files
+make -f %{SOURCE20} VERSION=%{version} configs
+
+#if a rhel kernel, apply the rhel config options
+%if 0%{?rhel}
+ for i in %{all_arch_configs}
+ do
+ mv $i $i.tmp
+ ./merge.pl config-rhel-generic $i.tmp > $i
+ rm $i.tmp
+ done
+%endif
+
+ApplyOptionalPatch git-linus.diff
+
+# This patch adds a "make nonint_oldconfig" which is non-interactive and
+# also gives a list of missing options at the end. Useful for automated
+# builds (as used in the buildsystem).
+ApplyPatch linux-2.6-build-nonintconfig.patch
+
+ApplyPatch linux-2.6-makefile-after_link.patch
+
+#
+# misc small stuff to make things compile
+#
+ApplyOptionalPatch linux-2.6-compile-fixes.patch
+
+%if !%{nopatches}
+
+# revert patches from upstream that conflict or that we get via other means
+ApplyOptionalPatch linux-2.6-upstream-reverts.patch -R
+
+ApplyPatch linux-2.6-hotfixes.patch
+
+# Roland's utrace ptrace replacement.
+ApplyPatch git-utrace.patch
+ApplyPatch utrace-ptrace-fix-build.patch
+ApplyPatch utrace-remove-use-of-kref_set.patch
+
+# Architecture patches
+# x86(-64)
+
+#
+# Intel IOMMU
+#
+
+#
+# PowerPC
+#
+
+#
+# SPARC64
+#
+ApplyPatch linux-2.6.29-sparc-IOC_TYPECHECK.patch
+
+#
+# Exec shield
+#
+ApplyPatch linux-2.6-i386-nx-emulation.patch
+ApplyPatch linux-2.6-32bit-mmap-exec-randomization.patch
+
+#
+# bugfixes to drivers and filesystems
+#
+
+# ext4
+ApplyPatch linux-2.6-ext4-fix-freeze-deadlock.patch
+
+# xfs
+
+# btrfs
+
+
+# eCryptfs
+
+# NFSv4
+
+# USB
+
+# WMI
+
+# ACPI
+ApplyPatch linux-2.6-defaults-acpi-video.patch
+ApplyPatch linux-2.6-acpi-video-dos.patch
+ApplyPatch acpi-ec-add-delay-before-write.patch
+ApplyPatch linux-2.6-acpi-debug-infinite-loop.patch
+
+# Various low-impact patches to aid debugging.
+ApplyPatch linux-2.6-debug-sizeof-structs.patch
+ApplyPatch linux-2.6-debug-nmi-timeout.patch
+ApplyPatch linux-2.6-debug-taint-vm.patch
+ApplyPatch linux-2.6-debug-vm-would-have-oomkilled.patch
+ApplyPatch linux-2.6-debug-always-inline-kzalloc.patch
+
+#
+# PCI
+#
+# make default state of PCI MSI a config option
+ApplyPatch linux-2.6-defaults-pci_no_msi.patch
+# enable ASPM by default on hardware we expect to work
+ApplyPatch linux-2.6-defaults-aspm.patch
+# disable aspm if acpi doesn't provide an _OSC method
+ApplyPatch pci-acpi-disable-aspm-if-no-osc.patch
+# allow drivers to disable aspm at load time
+ApplyPatch pci-aspm-dont-enable-too-early.patch
+
+#
+# SCSI Bits.
+#
+
+# ACPI
+
+# ALSA
+ApplyPatch hda_intel-prealloc-4mb-dmabuffer.patch
+
+# Networking
+
+# Misc fixes
+# The input layer spews crap no-one cares about.
+ApplyPatch linux-2.6-input-kill-stupid-messages.patch
+
+# stop floppy.ko from autoloading during udev...
+ApplyPatch die-floppy-die.patch
+
+ApplyPatch linux-2.6.30-no-pcspkr-modalias.patch
+
+#ApplyPatch thinkpad-acpi-fix-backlight.patch
+
+# Allow to use 480600 baud on 16C950 UARTs
+ApplyPatch linux-2.6-serial-460800.patch
+
+# Silence some useless messages that still get printed with 'quiet'
+ApplyPatch linux-2.6-silence-noise.patch
+
+# Make fbcon not show the penguins with 'quiet'
+ApplyPatch linux-2.6-silence-fbcon-logo.patch
+
+# Fix the SELinux mprotect checks on executable mappings
+#ApplyPatch linux-2.6-selinux-mprotect-checks.patch
+# Fix SELinux for sparc
+# FIXME: Can we drop this now? See updated linux-2.6-selinux-mprotect-checks.patch
+#ApplyPatch linux-2.6-sparc-selinux-mprotect-checks.patch
+
+# Changes to upstream defaults.
+
+
+# /dev/crash driver.
+ApplyPatch linux-2.6-crash-driver.patch
+
+# crypto/
+
+# Assorted Virt Fixes
+ApplyPatch fix_xen_guest_on_old_EC2.patch
+
+#ApplyPatch drm-revert-drm-fbdev-rework-output-polling-to-be-back-in-core.patch
+#ApplyPatch revert-drm-kms-toggle-poll-around-switcheroo.patch
+
+# Nouveau DRM + drm fixes
+ApplyPatch drm-nouveau-updates.patch
+ApplyPatch drm-intel-big-hammer.patch
+ApplyOptionalPatch drm-intel-next.patch
+ApplyPatch drm-intel-make-lvds-work.patch
+ApplyPatch linux-2.6-intel-iommu-igfx.patch
+
+# linux1394 git patches
+#ApplyPatch linux-2.6-firewire-git-update.patch
+#ApplyOptionalPatch linux-2.6-firewire-git-pending.patch
+
+# silence the ACPI blacklist code
+ApplyPatch linux-2.6-silence-acpi-blacklist.patch
+
+# V4L/DVB updates/fixes/experimental drivers
+# apply if non-empty
+ApplyOptionalPatch linux-2.6-v4l-dvb-fixes.patch
+ApplyOptionalPatch linux-2.6-v4l-dvb-update.patch
+ApplyOptionalPatch linux-2.6-v4l-dvb-experimental.patch
+ApplyPatch linux-2.6-v4l-dvb-uvcvideo-update.patch
+
+ApplyPatch linux-2.6-v4l-dvb-ir-core-update.patch
+ApplyPatch linux-2.6-v4l-dvb-add-lgdt3304-support.patch
+ApplyPatch linux-2.6-v4l-dvb-add-kworld-a340-support.patch
+
+# http://www.lirc.org/
+ApplyPatch lirc-staging-2.6.36.patch
+#ApplyOptionalPatch lirc-staging-2.6.36-fixes.patch
+# enable IR receiver on Hauppauge HD PVR (v4l-dvb merge pending)
+ApplyPatch hdpvr-ir-enable.patch
+
+# Patches headed upstream
+ApplyPatch disable-i8042-check-on-apple-mac.patch
+
+ApplyPatch neuter_intel_microcode_load.patch
+
+# rhbz#533746
+#ApplyPatch ssb_check_for_sprom.patch
+
+ApplyPatch only-use-alpha2-regulatory-information-from-country-IE.patch
+
+# END OF PATCH APPLICATIONS
+
+%endif
+
+# Any further pre-build tree manipulations happen here.
+
+chmod +x scripts/checkpatch.pl
+
+# only deal with configs if we are going to build for the arch
+%ifnarch %nobuildarches
+
+mkdir configs
+
+# Remove configs not for the buildarch
+for cfg in kernel-%{version}-*.config; do
+ if [ `echo %{all_arch_configs} | grep -c $cfg` -eq 0 ]; then
+ rm -f $cfg
+ fi
+done
+
+%if !%{debugbuildsenabled}
+rm -f kernel-%{version}-*debug.config
+%endif
+
+# now run oldconfig over all the config files
+for i in *.config
+do
+ mv $i .config
+ Arch=`head -1 .config | cut -b 3-`
+ make ARCH=$Arch %{oldconfig_target} > /dev/null
+ echo "# $Arch" > configs/$i
+ cat .config >> configs/$i
+done
+# end of kernel config
+%endif
+
+# get rid of unwanted files resulting from patch fuzz
+find . \( -name "*.orig" -o -name "*~" \) -exec rm -f {} \; >/dev/null
+
+cd ..
+
+###
+### build
+###
+%build
+
+%if %{with_sparse}
+%define sparse_mflags C=1
+%endif
+
+%if %{fancy_debuginfo}
+# This override tweaks the kernel makefiles so that we run debugedit on an
+# object before embedding it. When we later run find-debuginfo.sh, it will
+# run debugedit again. The edits it does change the build ID bits embedded
+# in the stripped object, but repeating debugedit is a no-op. We do it
+# beforehand to get the proper final build ID bits into the embedded image.
+# This affects the vDSO images in vmlinux, and the vmlinux image in bzImage.
+export AFTER_LINK=\
+'sh -xc "/usr/lib/rpm/debugedit -b $$RPM_BUILD_DIR -d /usr/src/debug \
+ -i $@ > $@.id"'
+%endif
+
+cp_vmlinux()
+{
+ eu-strip --remove-comment -o "$2" "$1"
+}
+
+BuildKernel() {
+ MakeTarget=$1
+ KernelImage=$2
+ Flavour=$3
+ InstallName=${4:-vmlinuz}
+
+ # Pick the right config file for the kernel we're building
+ Config=kernel-%{version}-%{_target_cpu}${Flavour:+-${Flavour}}.config
+ DevelDir=/usr/src/kernels/%{KVERREL}${Flavour:+.${Flavour}}
+
+ # When the bootable image is just the ELF kernel, strip it.
+ # We already copy the unstripped file into the debuginfo package.
+ if [ "$KernelImage" = vmlinux ]; then
+ CopyKernel=cp_vmlinux
+ else
+ CopyKernel=cp
+ fi
+
+ KernelVer=%{version}-%{release}.%{_target_cpu}${Flavour:+.${Flavour}}
+ echo BUILDING A KERNEL FOR ${Flavour} %{_target_cpu}...
+
+ # make sure EXTRAVERSION says what we want it to say
+ perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = %{?stablerev}-%{release}.%{_target_cpu}${Flavour:+.${Flavour}}/" Makefile
+
+ # if pre-rc1 devel kernel, must fix up SUBLEVEL for our versioning scheme
+ %if !0%{?rcrev}
+ %if 0%{?gitrev}
+ perl -p -i -e 's/^SUBLEVEL.*/SUBLEVEL = %{upstream_sublevel}/' Makefile
+ %endif
+ %endif
+
+ # and now to start the build process
+
+ make -s mrproper
+ cp configs/$Config .config
+
+ Arch=`head -1 .config | cut -b 3-`
+ echo USING ARCH=$Arch
+
+ make -s ARCH=$Arch %{oldconfig_target} > /dev/null
+ make -s ARCH=$Arch V=1 %{?_smp_mflags} $MakeTarget %{?sparse_mflags}
+ make -s ARCH=$Arch V=1 %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
+
+ # Start installing the results
+%if %{with_debuginfo}
+ mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/boot
+ mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
+%endif
+ mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
+ install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
+ install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
+
+ # We estimate the size of the initramfs because rpm needs to take this size
+ # into consideration when performing disk space calculations. (See bz #530778)
+ dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
+
+ if [ -f arch/$Arch/boot/zImage.stub ]; then
+ cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
+ fi
+ $CopyKernel $KernelImage \
+ $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
+ chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
+
+ mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
+ # Override $(mod-fw) because we don't want it to install any firmware
+ # We'll do that ourselves with 'make firmware_install'
+ make -s ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT modules_install KERNELRELEASE=$KernelVer mod-fw=
+%ifarch %{vdso_arches}
+ make -s ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
+ if [ ! -s ldconfig-kernel.conf ]; then
+ echo > ldconfig-kernel.conf "\
+# Placeholder file, no vDSO hwcap entries used in this kernel."
+ fi
+ %{__install} -D -m 444 ldconfig-kernel.conf \
+ $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
+%endif
+
+ # And save the headers/makefiles etc for building modules against
+ #
+ # This all looks scary, but the end result is supposed to be:
+ # * all arch relevant include/ files
+ # * all Makefile/Kconfig files
+ # * all script/ files
+
+ rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
+ rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
+ mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
+ (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
+ # dirs for additional modules per module-init-tools, kbuild/modules.txt
+ mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/extra
+ mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
+ # first copy everything
+ cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
+ cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
+ cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
+ if [ -s Module.markers ]; then
+ cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
+ fi
+ # then drop all but the needed Makefiles/Kconfig files
+ rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Documentation
+ rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
+ rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
+ cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
+ cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
+ if [ -d arch/$Arch/scripts ]; then
+ cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
+ fi
+ if [ -f arch/$Arch/*lds ]; then
+ cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
+ fi
+ rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*.o
+ rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*/*.o
+%ifarch ppc
+ cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
+%endif
+ if [ -d arch/%{asmarch}/include ]; then
+ cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
+ fi
+ cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
+
+ # Make sure the Makefile and version.h have a matching timestamp so that
+ # external modules can be built
+ touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/linux/version.h
+ touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/linux/autoconf.h
+ # Copy .config to include/config/auto.conf so "make prepare" is unnecessary.
+ cp $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
+
+ if test -s vmlinux.id; then
+ cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
+ else
+ echo >&2 "*** WARNING *** no vmlinux build ID! ***"
+ fi
+
+ #
+ # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
+ #
+%if %{with_debuginfo}
+ mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
+ cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
+%endif
+
+ find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
+
+ # mark modules executable so that strip-to-file can strip them
+ xargs --no-run-if-empty chmod u+x < modnames
+
+ # Generate a list of modules for block and networking.
+
+ fgrep /drivers/ modnames | xargs --no-run-if-empty nm -upA |
+ sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
+
+ collect_modules_list()
+ {
+ sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
+ LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
+ }
+
+ collect_modules_list networking \
+ 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register'
+ collect_modules_list block \
+ 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler'
+ collect_modules_list drm \
+ 'drm_open|drm_init'
+ collect_modules_list modesetting \
+ 'drm_crtc_init'
+
+ # detect missing or incorrect license tags
+ rm -f modinfo
+ while read i
+ do
+ echo -n "${i#$RPM_BUILD_ROOT/lib/modules/$KernelVer/} " >> modinfo
+ /sbin/modinfo -l $i >> modinfo
+ done < modnames
+
+ egrep -v \
+ 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' \
+ modinfo && exit 1
+
+ rm -f modinfo modnames
+
+ # remove files that will be auto generated by depmod at rpm -i time
+ for i in alias alias.bin ccwmap dep dep.bin ieee1394map inputmap isapnpmap ofmap pcimap seriomap symbols symbols.bin usbmap
+ do
+ rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$i
+ done
+
+ # Move the devel headers out of the root file system
+ mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
+ mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
+ ln -sf ../../..$DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
+}
+
+###
+# DO it...
+###
+
+# prepare directories
+rm -rf $RPM_BUILD_ROOT
+mkdir -p $RPM_BUILD_ROOT/boot
+mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
+
+cd linux-%{kversion}.%{_target_cpu}
+
+%if %{with_debug}
+BuildKernel %make_target %kernel_image debug
+%endif
+
+%if %{with_pae_debug}
+BuildKernel %make_target %kernel_image PAEdebug
+%endif
+
+%if %{with_pae}
+BuildKernel %make_target %kernel_image PAE
+%endif
+
+%if %{with_up}
+BuildKernel %make_target %kernel_image
+%endif
+
+%if %{with_smp}
+BuildKernel %make_target %kernel_image smp
+%endif
+
+%global perf_make \
+ make %{?_smp_mflags} -C tools/perf -s V=1 NO_DEMANGLE=1 prefix=%{_prefix}
+%if %{with_perf}
+%{perf_make} all
+%{perf_make} man || %{doc_build_fail}
+%endif
+
+%if %{with_doc}
+# Make the HTML and man pages.
+make %{?_smp_mflags} htmldocs mandocs || %{doc_build_fail}
+
+# sometimes non-world-readable files sneak into the kernel source tree
+chmod -R a=rX Documentation
+find Documentation -type d | xargs chmod u+w
+%endif
+
+###
+### Special hacks for debuginfo subpackages.
+###
+
+# This macro is used by %%install, so we must redefine it before that.
+%define debug_package %{nil}
+
+%if %{fancy_debuginfo}
+%define __debug_install_post \
+ /usr/lib/rpm/find-debuginfo.sh %{debuginfo_args} %{_builddir}/%{?buildsubdir}\
+%{nil}
+%endif
+
+%if %{with_debuginfo}
+%ifnarch noarch
+%global __debug_package 1
+%files -f debugfiles.list debuginfo-common-%{_target_cpu}
+%defattr(-,root,root)
+%endif
+%endif
+
+###
+### install
+###
+
+%install
+
+cd linux-%{kversion}.%{_target_cpu}
+
+%if %{with_doc}
+docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{rpmversion}
+man9dir=$RPM_BUILD_ROOT%{_datadir}/man/man9
+
+# copy the source over
+mkdir -p $docdir
+tar -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
+
+# Install man pages for the kernel API.
+mkdir -p $man9dir
+find Documentation/DocBook/man -name '*.9.gz' -print0 |
+xargs -0 --no-run-if-empty %{__install} -m 444 -t $man9dir $m
+ls $man9dir | grep -q '' || > $man9dir/BROKEN
+%endif # with_doc
+
+%if %{with_perf}
+# perf tool binary and supporting scripts/binaries
+%{perf_make} DESTDIR=$RPM_BUILD_ROOT install
+
+# perf man pages (note: implicit rpm magic compresses them later)
+%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man || %{doc_build_fail}
+%endif
+
+%if %{with_headers}
+# Install kernel headers
+make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
+
+# Do headers_check but don't die if it fails.
+make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_check \
+ > hdrwarnings.txt || :
+if grep -q exist hdrwarnings.txt; then
+ sed s:^$RPM_BUILD_ROOT/usr/include/:: hdrwarnings.txt
+ # Temporarily cause a build failure if header inconsistencies.
+ # exit 1
+fi
+
+find $RPM_BUILD_ROOT/usr/include \
+ \( -name .install -o -name .check -o \
+ -name ..install.cmd -o -name ..check.cmd \) | xargs rm -f
+
+# glibc provides scsi headers for itself, for now
+rm -rf $RPM_BUILD_ROOT/usr/include/scsi
+rm -f $RPM_BUILD_ROOT/usr/include/asm*/atomic.h
+rm -f $RPM_BUILD_ROOT/usr/include/asm*/io.h
+rm -f $RPM_BUILD_ROOT/usr/include/asm*/irq.h
+%endif
+
+%if %{with_firmware}
+%{build_firmware}
+%endif
+
+%if %{with_bootwrapper}
+make DESTDIR=$RPM_BUILD_ROOT bootwrapper_install WRAPPER_OBJDIR=%{_libdir}/kernel-wrapper WRAPPER_DTSDIR=%{_libdir}/kernel-wrapper/dts
+%endif
+
+
+###
+### clean
+###
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+###
+### scripts
+###
+
+#
+# This macro defines a %%post script for a kernel*-devel package.
+# %%kernel_devel_post [<subpackage>]
+#
+%define kernel_devel_post() \
+%{expand:%%post %{?1:%{1}-}devel}\
+if [ -f /etc/sysconfig/kernel ]\
+then\
+ . /etc/sysconfig/kernel || exit $?\
+fi\
+if [ "$HARDLINK" != "no" -a -x /usr/sbin/hardlink ]\
+then\
+ (cd /usr/src/kernels/%{KVERREL}%{?1:.%{1}} &&\
+ /usr/bin/find . -type f | while read f; do\
+ hardlink -c /usr/src/kernels/*.fc*.*/$f $f\
+ done)\
+fi\
+%{nil}
+
+# This macro defines a %%posttrans script for a kernel package.
+# %%kernel_variant_posttrans [<subpackage>]
+# More text can follow to go at the end of this variant's %%post.
+#
+%define kernel_variant_posttrans() \
+%{expand:%%posttrans %{?1}}\
+/sbin/new-kernel-pkg --package kernel%{?-v:-%{-v*}} --mkinitrd --dracut --depmod --update %{KVERREL}%{?-v:.%{-v*}} || exit $?\
+/sbin/new-kernel-pkg --package kernel%{?1:-%{1}} --rpmposttrans %{KVERREL}%{?1:.%{1}} || exit $?\
+%{nil}
+
+#
+# This macro defines a %%post script for a kernel package and its devel package.
+# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
+# More text can follow to go at the end of this variant's %%post.
+#
+%define kernel_variant_post(v:r:) \
+%{expand:%%kernel_devel_post %{?-v*}}\
+%{expand:%%kernel_variant_posttrans %{?-v*}}\
+%{expand:%%post %{?-v*}}\
+%{-r:\
+if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
+ [ -f /etc/sysconfig/kernel ]; then\
+ /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
+fi}\
+%{expand:\
+/sbin/new-kernel-pkg --package kernel%{?-v:-%{-v*}} --install %{KVERREL}%{?-v:.%{-v*}} || exit $?\
+}\
+%{nil}
+
+#
+# This macro defines a %%preun script for a kernel package.
+# %%kernel_variant_preun <subpackage>
+#
+%define kernel_variant_preun() \
+%{expand:%%preun %{?1}}\
+/sbin/new-kernel-pkg --rminitrd --rmmoddep --remove %{KVERREL}%{?1:.%{1}} || exit $?\
+%{nil}
+
+%kernel_variant_preun
+%kernel_variant_post -r kernel-smp
+
+%kernel_variant_preun smp
+%kernel_variant_post -v smp
+
+%kernel_variant_preun PAE
+%kernel_variant_post -v PAE -r (kernel|kernel-smp)
+
+%kernel_variant_preun debug
+%kernel_variant_post -v debug
+
+%kernel_variant_post -v PAEdebug -r (kernel|kernel-smp)
+%kernel_variant_preun PAEdebug
+
+if [ -x /sbin/ldconfig ]
+then
+ /sbin/ldconfig -X || exit $?
+fi
+
+###
+### file lists
+###
+
+%if %{with_headers}
+%files headers
+%defattr(-,root,root)
+/usr/include/*
+%endif
+
+%if %{with_firmware}
+%files firmware
+%defattr(-,root,root)
+/lib/firmware/*
+%doc linux-%{kversion}.%{_target_cpu}/firmware/WHENCE
+%endif
+
+%if %{with_bootwrapper}
+%files bootwrapper
+%defattr(-,root,root)
+/usr/sbin/*
+%{_libdir}/kernel-wrapper
+%endif
+
+# only some architecture builds need kernel-doc
+%if %{with_doc}
+%files doc
+%defattr(-,root,root)
+%{_datadir}/doc/kernel-doc-%{rpmversion}/Documentation/*
+%dir %{_datadir}/doc/kernel-doc-%{rpmversion}/Documentation
+%dir %{_datadir}/doc/kernel-doc-%{rpmversion}
+%{_datadir}/man/man9/*
+%endif
+
+%if %{with_perf}
+%files -n perf
+%defattr(-,root,root)
+%{_bindir}/perf
+%dir %{_libexecdir}/perf-core
+%{_libexecdir}/perf-core/*
+%{_mandir}/man[1-8]/*
+%endif
+
+# This is %{image_install_path} on an arch where that includes ELF files,
+# or empty otherwise.
+%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
+
+#
+# This macro defines the %%files sections for a kernel package
+# and its devel and debuginfo packages.
+# %%kernel_variant_files [-k vmlinux] <condition> <subpackage>
+#
+%define kernel_variant_files(k:) \
+%if %{1}\
+%{expand:%%files %{?2}}\
+%defattr(-,root,root)\
+/%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?2:.%{2}}\
+/boot/System.map-%{KVERREL}%{?2:.%{2}}\
+/boot/config-%{KVERREL}%{?2:.%{2}}\
+%dir /lib/modules/%{KVERREL}%{?2:.%{2}}\
+/lib/modules/%{KVERREL}%{?2:.%{2}}/kernel\
+/lib/modules/%{KVERREL}%{?2:.%{2}}/build\
+/lib/modules/%{KVERREL}%{?2:.%{2}}/source\
+/lib/modules/%{KVERREL}%{?2:.%{2}}/extra\
+/lib/modules/%{KVERREL}%{?2:.%{2}}/updates\
+%ifarch %{vdso_arches}\
+/lib/modules/%{KVERREL}%{?2:.%{2}}/vdso\
+/etc/ld.so.conf.d/kernel-%{KVERREL}%{?2:.%{2}}.conf\
+%endif\
+/lib/modules/%{KVERREL}%{?2:.%{2}}/modules.*\
+%ghost /boot/initramfs-%{KVERREL}%{?2:.%{2}}.img\
+%{expand:%%files %{?2:%{2}-}devel}\
+%defattr(-,root,root)\
+/usr/src/kernels/%{KVERREL}%{?2:.%{2}}\
+%if %{with_debuginfo}\
+%ifnarch noarch\
+%if %{fancy_debuginfo}\
+%{expand:%%files -f debuginfo%{?2}.list %{?2:%{2}-}debuginfo}\
+%else\
+%{expand:%%files %{?2:%{2}-}debuginfo}\
+%endif\
+%defattr(-,root,root)\
+%if !%{fancy_debuginfo}\
+%if "%{elf_image_install_path}" != ""\
+%{debuginfodir}/%{elf_image_install_path}/*-%{KVERREL}%{?2:.%{2}}.debug\
+%endif\
+%{debuginfodir}/lib/modules/%{KVERREL}%{?2:.%{2}}\
+%{debuginfodir}/usr/src/kernels/%{KVERREL}%{?2:.%{2}}\
+%endif\
+%endif\
+%endif\
+%endif\
+%{nil}
+
+
+%kernel_variant_files %{with_up}
+%kernel_variant_files %{with_smp} smp
+%kernel_variant_files %{with_debug} debug
+%kernel_variant_files %{with_pae} PAE
+%kernel_variant_files %{with_pae_debug} PAEdebug
+
+# plz don't put in a version string unless you're going to tag
+# and build.
+
+# ___________________________________________________________
+# / This branch is for Fedora 14. You probably want to commit \
+# \ to the F-13 branch instead, or in addition to this one. /
+# -----------------------------------------------------------
+# \ ^__^
+# \ (@@)\_______
+# (__)\ )\/\
+# ||----w |
+# || ||
+
+%changelog
+* Mon Jul 27 2010 Kyle McMartin <kyle@redhat.com>
+- Patch from linville to only use the country code to set band limits.
+ (Fixes Apple Airport base stations from limiting you from associating
+ with other channels.)
+
+* Fri Jul 23 2010 Chuck Ebbert <cebbert@redhat.com> 2.6.35-0.56.rc6.git1
+- Linux 2.6.35-rc6-git1
+
+* Thu Jul 22 2010 Dave Jones <davej@redhat.com>
+- 2.6.35-rc6
+
+* Thu Jul 22 2010 Ben Skeggsb <bskeggs@redhat.com>
+- drm-nouveau-updates: bring back, most patches *weren't* upstream yet,
+ they're queued for 2.6.36.
+
+* Wed Jul 21 2010 Chuck Ebbert <cebbert@redhat.com> 2.6.35-0.53.rc5.git7
+- Linux 2.6.35-rc5-git7
+
+* Wed Jul 21 2010 Dave Jones <davej@redhat.com>
+- Remove the %verify (no mtime) on kernel-devel's files.
+ If they got modified, they should fail rpm verify.
+
+* Wed Jul 21 2010 Dave Jones <davej@redhat.com>
+- Linux 2.6.35-rc5-git6
+- Removed drm-nouveau-updates.patch (upstreamed)
+
+* Mon Jul 19 2010 Chuck Ebbert <cebbert@redhat.com>
+- Linux 2.6.35-rc5-git4
+
+* Mon Jul 19 2010 Jarod Wilson <jarod@redhat.com> 2.6.35-0.49.rc5.git2
+- Fix from Kyle for input_set_key oops introduced by ir-core patches (#615707)
+- Update lirc-staging patches to match what's about to be submitted upstream,
+ complete with updated copy_from_user overflow check fixages
+
+* Sun Jul 18 2010 Chuck Ebbert <cebbert@redhat.com> 2.6.35-0.47.rc5.git2
+- Linux 2.6.35-rc5-git2
+
+* Sun Jul 18 2010 Chuck Ebbert <cebbert@redhat.com>
+- lirc-staging-2.6.36-fixes.patch: Fix up buffer size checking in
+ lirc code, found by CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
+
+* Sun Jul 18 2010 Hans de Goede <hdegoede@redhat.com>
+- Add support for dynamic menu controls to the uvcvideo driver (#576023)
+
+* Sun Jul 18 2010 Jarod Wilson <jarod@redhat.com> 2.6.35-0.44.rc5.git1
+- Oops, minor oversight when moving lirc bits into staging resulted
+ in the modules themselves not getting built. Fix that.
+
+* Fri Jul 16 2010 Dave Jones <davej@redhat.com>
+- Limit some alsa spew that the nuforce udac makes happen a lot.
+
+* Fri Jul 16 2010 Jarod Wilson <jarod@redhat.com> 2.6.35-0.41.rc5.git1
+- Pull in ir-core update from v4l/dvb staging for 2.6.36, which includes
+ new in-kernel lirc_dev and ir-core mceusb driver
+- Move not-yet-merged/ported lirc bits to drivers/staging/, patch to be
+ sent upstream for 2.6.36 staging tree RSN
+
+* Thu Jul 15 2010 Chuck Ebbert <cebbert@redhat.com> 2.6.35-0.40.rc5.git1
+- Replace pci-acpi-disable-aspm-if-no-osc.patch with
+ updated version from F-13
+
+* Thu Jul 15 2010 Chuck Ebbert <cebbert@redhat.com>
+- Linux 2.6.35-rc5-git1
+
+* Tue Jul 13 2010 Chuck Ebbert <cebbert@redhat.com>
+- Linux 2.6.35-rc5
+
+* Tue Jul 13 2010 Ben Skeggs <bskeggs@redhat.com>
+- nouveau: miscellanous fixes
+
+* Mon Jul 12 2010 Dave Jones <davej@redhat.com>
+- 2.6.35-rc4-git5
+
+* Mon Jul 12 2010 Dave Jones <davej@redhat.com>
+- Remove a bunch of x86 options from config files that get set
+ automatically, and can't be overridden.
+
+* Fri Jul 9 2010 Roland McGrath <roland@redhat.com>
+- Split execshield into two patches.
+
+* Thu Jul 08 2010 Chuck Ebbert <cebbert@redhat.com> 2.6.35-0.31.rc4.git4
+- Linux 2.6.35-rc4-git4
+
+* Thu Jul 8 2010 Roland McGrath <roland@redhat.com>
+- Remove exec-shield=2 setting, some other cruft from execshield.
+
+* Wed Jul 7 2010 Roland McGrath <roland@redhat.com> 2.6.35-0.29.rc4.git0.fc14
+- Revamp perf packaging.
+
+* Wed Jul 07 2010 Chuck Ebbert <cebbert@redhat.com>
+- pci-acpi-disable-aspm-if-no-osc.patch, pci-aspm-dont-enable-too-early.patch
+ PCI layer fixes for problems with hardware that doesn't support ASPM.
+
+* Wed Jul 07 2010 Ben Skeggs <bskeggs@redhat.com>
+- nouveau: bring in nouveau upstream
+
+* Mon Jul 05 2010 Dave Jones <davej@redhat.com>
+- 2.6.35-rc4
+
+* Fri Jul 02 2010 Dave Jones <davej@redhat.com>
+- 2.6.35-rc3-git7
+ dropped: i915-fix-crt-hotplug-regression.patch (upstream)
+ dropped: drm-i915-fix-edp-panels.patch (upstream)
+
+* Fri Jul 02 2010 Dave Jones <davej@redhat.com>
+- 2.6.35-rc3-git6
+
+* Thu Jul 01 2010 Dave Jones <davej@redhat.com>
+- Add a patch to debug an infinite loop warning from acpi.
+
+* Thu Jul 01 2010 Dave Jones <davej@redhat.com>
+- 2.6.35-rc3-git5
+
+* Thu Jul 01 2010 Chuck Ebbert <cebbert@redhat.com>
+- Copy fix for BZ#220892 from F-13.
+
+* Wed Jun 30 2010 Kyle McMartin <kyle@redhat.com> 2.6.35-0.19.rc3.git4
+- 2.6.35-rc3-git4
+
+* Tue Jun 29 2010 Chuck Ebbert <cebbert@redhat.com>
+- Disable Intel Moorestown support -- it breaks PC keyboard controllers.
+
+* Tue Jun 29 2010 Dave Jones <davej@redhat.com>
+- Building external modules requires perl. (#608525)
+
+* Tue Jun 29 2010 Kyle McMartin <kyle@redhat.com> 2.6.35-0.15.rc3.git3
+- 2.6.35-rc3-git3
+- i915-fix-crt-hotplug-regression.patch: attempt to solve the gm45 hotplug
+ irq storm.
+
+* Mon Jun 28 2010 Chuck Ebbert <cebbert@redhat.com>
+- ppc64: enable active memory sharing and DLPAR memory remove (#607175)
+
+* Mon Jun 28 2010 Dave Jones <davej@redhat.com>
+- 2.6.35-rc3-git2
+
+* Mon Jun 28 2010 Dave Jones <davej@redhat.com>
+- 2.6.35-rc3-git1
+
+* Mon Jun 28 2010 Dave Airlie <airlied@redhat.com>
+- drm-i915-fix-edp-panels.patch: update to newer version
+
+* Fri Jun 25 2010 Kyle McMartin <kyle@redhat.com>
+- drm-i915-fix-edp-panels.patch: copy from rawhide.
+
+* Wed Jun 23 2010 Eric Sandeen <sandeen@redhat.com>
+- Fix ext4 freeze deadlock (#607245)
+
+* Wed Jun 23 2010 Kyle McMartin <kyle@redhat.com>
+- Override generic's CONFIG_HZ_1000 on s390.
+
+* Tue Jun 22 2010 Dave Jones <davej@redhat.com>
+- Fix localhost networking.
+
+* Tue Jun 22 2010 Kyle McMartin <kyle@redhat.com> 2.6.35-0.1.rc3.git0
+- Putting the raw back into rawhide... Yeehaw.
+- 2.6.35-rc3
+- Drop a tonne of patches that were merged upstream, or were backports.
+- Rebase execshield, utrace.
+- Fix up a bunch of rejects, build failures.
+- Fix up lirc to build with strict copy_from_user checking.
+
+* Mon Jun 21 2010 Dave Jones <davej@redhat.com>
+- Disable workaround for obscure SMP pentium pro errata.
+ I miss the 1990s too, but it's time to move on.
+ If anyone actually needs this it would be better done using
+ the apply_alternatives infrastructure.
+
+* Mon Jun 21 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-45
+- drm-revert-drm-fbdev-rework-output-polling-to-be-back-in-core.patch
+ Revert eb1f8e4f, bisected by Nicolas Kaiser. Thanks! (rhbz#599190)
+ (If this works, will try to root-cause.)
+- rebase previous patch on top of above reversion
+
+* Mon Jun 21 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-44
+- revert-drm-kms-toggle-poll-around-switcheroo.patch (rhbz#599190)
+
+* Thu Jun 17 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-43
+- Suck in patch from Dave Miller in 2.6.35 to add async hash testing,
+ hopefully fixes error from previous commit. (But making it modular
+ is still a good idea.)
+
+* Thu Jun 17 2010 Kyle McMartin <kyle@redhat.com>
+- make ghash-clmulni modular to get rid of early boot noise (rhbz#586954)
+ (not a /fix/ but it should at least quiet boot down a bit if you have
+ the cpu support)
+
+* Wed Jun 16 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-40
+- Snag some more DRM commits into drm-next.patch that I missed the first
+ time.
+- Fix up radeon_pm toggle to work with the upstream code.
+
+* Tue Jun 15 2010 Prarit Bhargava <prarit@redhat.com>
+- Turn off CONFIG_I2O on x86.
+ It is broken on 64-bit address spaces (i686/PAE, x86_64), and frankly, I'm
+ having trouble finding anyone who actually uses it.
+
+* Tue Jun 15 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-38
+- Fix build by nuking superfluous "%{expand" which was missing a
+ trailing '}'. You may now reward me with an array of alcoholic
+ beverages, I so richly deserve for spending roughly a full
+ day staring at the diff of the spec.
+
+* Mon Jun 14 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-37
+- btrfs ACL fixes from CVE-2010-2071.
+
+* Sun Jun 13 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-36
+- remunge and reapply hdpvr-ir-enable
+
+* Sun Jun 13 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-35
+- mac80211/iwlwifi fix connections to some APs (rhbz#558002)
+ patches from sgruszka@.
+
+* Sun Jun 13 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-34
+- Provide a knob to enable radeon_pm to allow users to test
+ that functionality. Add radeon.pm=1 to your kernel cmdline
+ in order to enable it. (It still defaults to off though.)
+
+* Sun Jun 13 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-33
+- Update drm-next to include fixes since 2.6.35-rc1.
+
+* Fri Jun 11 2010 Justin M. Forbes <jforbes@redhat.com>
+- Disable xsave for so that kernel will boot on ancient EC2 hosts.
+
+* Wed Jun 09 2010 John W. Linville <linville@redhat.com>
+- Disable rt20xx and rt35xx chipset support in rt2800 drivers (#570869)
+
+* Wed Jun 09 2010 David Woodhouse <David.Woodhouse@intel.com>
+- Include PHY modules in modules.networking (#602155)
+
+* Tue Jun 08 2010 Dave Jones <davej@redhat.com>
+- Remove useless -kdump kernel support
+
+* Tue Jun 08 2010 Dave Jones <davej@redhat.com>
+- Remove ia64 ata quirk which had no explanation, and still
+ isn't upstream. No-one cares.
+
+* Tue Jun 08 2010 Dave Jones <davej@redhat.com>
+- Drop linux-2.6-vio-modalias.patch
+ Two years should have been long enough to get upstream if this is important.
+
+* Tue Jun 08 2010 Dave Jones <davej@redhat.com>
+- Remove crufty Xen remnants from specfile.
+
+* Tue Jun 08 2010 Dave Jones <davej@redhat.com>
+- Remove mkinitrd ifdefs. Dracut or GTFO.
+
+* Thu Jun 03 2010 Kyle McMartin <kyle@redhat.com>
+- Build kernel headers on s390.
+
+* Wed Jun 02 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-20
+- Disable doc_build_fail because xmlto et al. are crud.
+
+* Wed Jun 02 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-19
+- Enable -debug flavour builds, until we branch for 2.6.35-rcX.
+
+* Wed Jun 02 2010 Kyle McMartin <kyle@redhat.com>
+- revert writeback fixes for now, there appear to be dragons
+ lurking there still.
+
+* Tue Jun 01 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-18
+- fix mismerge in i915_gem.c, drm_gem_object_alloc is now
+ i915_gem_alloc_object.
+- add a hunk to rcu_read{,un}lock in sched_fair too.
+
+* Tue Jun 01 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-17
+- backport writeback fixes from Jens until stable@ picks them up.
+
+* Tue Jun 01 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-16
+- quiet-prove_RCU-in-cgroups.patch: shut RCU lockdep up
+ as in 8b08ca52f5942c21564bbb90ccfb61053f2c26a1.
+
+* Tue Jun 01 2010 Kyle McMartin <kyle@redhat.com>
+- disable radeon_pm for now.
+
+* Mon May 31 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-14
+- re-add drm-next.patch, should be in sync with 2.6.35 and what
+ was backported to Fedora 13.
+- drop patches merged in drm-next to 2.6.35
+- rebase relevant iwl fixes on top of 2.6.34 from the ones committed
+ to F-13 by linville.
+
+* Wed May 26 2010 Adam Jackson <ajax@redhat.com>
+- config-generic: Stop building i830.ko
+
+* Wed May 26 2010 Kyle McMartin <kyle@redhat.com>
+- iwlwifi-recover_from_tx_stall.patch: copy from F-13.
+
+* Fri May 21 2010 Roland McGrath <roland@redhat.com> 2.6.34-11
+- utrace update
+
+* Fri May 21 2010 Dave Jones <davej@redhat.com>
+- Update the SELinux mprotect patch with a newer version from Stephen
+
+* Fri May 21 2010 Roland McGrath <roland@redhat.com>
+- perf requires libdw now, not libdwarf
+
+* Fri May 21 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-6
+- Fixups for virt_console from Amit Shah, thanks!
+
+* Thu May 20 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-5
+- disable intel sdvo fixes until dependent code is backported.
+
+* Thu May 20 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-4
+- resync a lot of stuff with F-13...
+- linux-2.6-acpi-video-export-edid.patch: rebase & copy from F-13
+- acpi-ec-add-delay-before-write.patch: copy from F-13
+- ... and a whole lot more that I can't be bothered typing.
+
+* Mon May 17 2010 Matthew Garrett <mjg@redhat.com>
+- thinkpad-acpi-fix-backlight.patch: Fix backlight support on some recent
+ Thinkpads
+
+* Sun May 16 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-2
+- Disable strict copy_from_user checking until lirc is fixed.
+
+* Sun May 16 2010 Kyle McMartin <kyle@redhat.com> 2.6.34-1
+- Linux 2.6.34
+
+* Sun May 16 2010 Kyle McMartin <kyle@redhat.com>
+- Trimmed changelog, see CVS.
+
+###
+# The following Emacs magic makes C-c C-e use UTC dates.
+# Local Variables:
+# rpm-change-log-uses-utc: t
+# End:
+###