summaryrefslogtreecommitdiffstats
path: root/kernel-arm64.patch
diff options
context:
space:
mode:
authorKyle McMartin <kmcmarti@redhat.com>2014-10-01 16:53:52 -0400
committerKyle McMartin <kmcmarti@redhat.com>2014-10-01 16:53:52 -0400
commit3a407e976ee41941582c76230e746c8bbf536f8d (patch)
treefda78614053d807234e5fe0a9c9dd7bf0cd72b8f /kernel-arm64.patch
parent1aac082a552d6ed7c3397b0cd69af2dc78f14ae3 (diff)
downloadkernel-3a407e976ee41941582c76230e746c8bbf536f8d.tar.gz
kernel-3a407e976ee41941582c76230e746c8bbf536f8d.tar.xz
kernel-3a407e976ee41941582c76230e746c8bbf536f8d.zip
Update kernel-arm64.patch from git, again... enable AMD_XGBE on arm64.
Diffstat (limited to 'kernel-arm64.patch')
-rw-r--r--kernel-arm64.patch2070
1 files changed, 2033 insertions, 37 deletions
diff --git a/kernel-arm64.patch b/kernel-arm64.patch
index a8813c1fb..a05aa3383 100644
--- a/kernel-arm64.patch
+++ b/kernel-arm64.patch
@@ -1,3 +1,1232 @@
+commit 87257d3e584fad0b47e6304da54a1932f42b11bb
+Author: Mark Salter <msalter@redhat.com>
+Date: Tue Sep 30 17:19:24 2014 -0400
+
+ arm64: avoid need for console= to enable serial console
+
+ Tell kernel to prefer one of the serial ports on platforms
+ pl011, 8250, or sbsa uarts. console= on command line will
+ override these assumed preferences.
+
+ Signed-off-by: Mark Salter <msalter@redhat.com>
+
+commit 56db24589d311ea3590527030ede007ec339e2d7
+Author: Tom Lendacky <thomas.lendacky@amd.com>
+Date: Tue Sep 9 23:33:17 2014 -0400
+
+ drivers: net: AMD Seattle XGBE PHY support for A0 silicon
+
+ This patch modifies the upstream AMD XGBE PHY driver to support
+ A0 Seattle silicon in currently shipping systems. The upstream
+ Linux driver is targetted for Seattle B0 silicon.
+
+ Signed-off-by: Mark Salter <msalter@redhat.com>
+
+commit 75554bb2e3c433a47e172d81a0b59df58810dc01
+Author: Tom Lendacky <thomas.lendacky@amd.com>
+Date: Tue Sep 9 23:34:07 2014 -0400
+
+ drivers: net: AMD Seattle XGBE 10GbE support for A0 silicon
+
+ This patch modifies the upstream AMD 10GbE XGBE Ethernet driver to
+ support A0 Seattle silicon in currently shipping systems. The
+ upstream Linux driver is targetted for Seattle B0 silicon.
+
+ Signed-off-by: Mark Salter <msalter@redhat.com>
+
+commit 41cb1b3c9e62256b8a4e92c50cd51b2a68d0c9c6
+Author: Graeme Gregory <graeme.gregory@linaro.org>
+Date: Fri Jul 26 17:55:02 2013 +0100
+
+ virtio-mmio: add ACPI probing
+
+ Added the match table and pointers for ACPI probing to the driver.
+
+ Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
+
+commit c06502fb4f00c6996c1f55cd342288508808c678
+Author: Graeme Gregory <graeme.gregory@linaro.org>
+Date: Wed Jul 24 11:29:48 2013 +0100
+
+ net: smc91x: add ACPI probing support.
+
+ Add device ID LINA0003 for this device and add the match table.
+
+ As its a platform device it needs no other code and will be probed in by
+ acpi_platform once device ID is added.
+
+ Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
+
+commit aad559613ff05a13f940129675659297e7125979
+Author: Mark Salter <msalter@redhat.com>
+Date: Tue Sep 23 12:48:48 2014 -0400
+
+ arm64/pci: add coherency inheritance for pci devices
+
+ Signed-off-by: Mark Salter <msalter@redhat.com>
+
+commit 8d2a4226d96ccae17fbc0ef7d7d9c5a07ad8b31f
+Author: Mark Salter <msalter@redhat.com>
+Date: Tue Sep 23 12:35:17 2014 -0400
+
+ arm64/acpi: make acpi disabled by default
+
+ Signed-off-by: Mark Salter <msalter@redhat.com>
+
+commit 0553f2b9fc94bfb0f9038003ad6f150cca196aad
+Author: Wei Huang <wei@redhat.com>
+Date: Thu Sep 18 20:32:03 2014 -0400
+
+ KVM: fix VTTBR_BADDR_MASK
+
+ The following is patch from AMD to fix VTTBR_BADDR_MASK. According to
+ AMD, this patch is required to enable KVM on Seattle.
+
+ The current VTTBR_BADDR_MASK only masks 39 bits, which is broken on current
+ systems. Rather than just add a bit it seems like a good time to also set
+ things at run-time instead of compile time to accomodate more hardware.
+
+ This patch sets TCR_EL2.PS, VTCR_EL2.T0SZ and vttbr_baddr_mask in runtime,
+ not compile time.
+
+ In ARMv8, EL2 physical address size (TCR_EL2.PS) and stage2 input address
+ size (VTCR_EL2.T0SZE) cannot be determined in compile time since they
+ depend on hardware capability.
+
+ According to Table D4-23 and Table D4-25 in ARM DDI 0487A.b document,
+ vttbr_x is calculated using different fixed values with consideration
+ of T0SZ, granule size and the level of translation tables. Therefore,
+ vttbr_baddr_mask should be determined dynamically.
+
+ Changes since v5:
+ Fixed declaration of vttbr_baddr_mask to not create multiple instances
+ Refactored return codes based on feedback
+ For 32 bit included kvm_arm.h in kvm_mmu.h to explictly pick up
+ VTTBR_BADDR_MASK
+
+ Changes since v4:
+ More minor cleanups from review
+ Moved some functions into headers
+ Added runtime check in kvm_alloc_stage2_pgd
+
+ Changes since v3:
+ Another rebase
+ Addressed minor comments from v2
+
+ Changes since v2:
+ Rebased on https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm.git next branch
+
+ Changes since v1:
+ Rebased fix on Jungseok Lee's patch https://lkml.org/lkml/2014/5/12/189 to
+ provide better long term fix. Updated that patch to log error instead of
+ silently fail on unaligned vttbr.
+
+ Cc: Marc Zyngier <marc.zyngier@arm.com>
+ Cc: Christoffer Dall <christoffer.dall@linaro.org>
+ Cc: Sungjinn Chung <sungjinn.chung@samsung.com>
+ Signed-off-by: Jungseok Lee <jays.lee@samsung.com>
+ Signed-off-by: Joel Schopp <joel.schopp@amd.com>
+
+ Signed-off-by: Wei Huang <wei@redhat.com>
+
+commit f53d1278fe445b7130f1ff76b2f453b453368284
+Author: Wei Huang <wei@redhat.com>
+Date: Thu Sep 18 20:02:57 2014 -0400
+
+ KVM/ACPI: Enable ACPI support for KVM virt GIC
+
+ This patches enables ACPI support for KVM virtual GIC. KVM parses
+ ACPI table for virt GIC related information when DT table is not
+ present. This is done by retrieving the information defined in
+ generic_interrupt entry of MADT table.
+
+ Note: Alexander Spyridakis from Virtual Open System posts a
+ _very_ similar patch to enable acpi-kvm. This patch borrows some
+ ideas from his patch.
+
+ Signed-off-by: Wei Huang <wei@redhat.com>
+
+commit ba63e452ff5b09cc0314f94e163a51c3279b9ca7
+Author: Wei Huang <wei@redhat.com>
+Date: Thu Sep 18 20:02:56 2014 -0400
+
+ KVM/ACPI: Enable ACPI support for virt arch timer
+
+ This patches enables ACPI support for KVM virtual arch_timer. It
+ allows KVM to parse ACPI table for virt arch_timer PPI when DT table
+ is not present. This is done by retrieving the information from
+ arch_timer_ppi array in arm_arch_timer driver.
+
+ Signed-off-by: Wei Huang <wei@redhat.com>
+
+commit dd3f6094c2142786f40a3bc4d69c60b430ecc675
+Author: Wei Huang <wei@redhat.com>
+Date: Thu Sep 18 20:02:55 2014 -0400
+
+ KVM/ACPI: Add kernel parameter kvmacpi to enable KVM ACPI support
+
+ This patch addes a new kernel parameter, kvmacpi, to turn on ACPI
+ support for KVM. Users can enable it using "kvmacpi=on" in command
+ line. When it is on, KVM will will parse ACPI tables to configure related
+ components. By default this option is off.
+
+ Note that DT will be probed first, no matter kvmacpi is ON or OFF.
+ This is because many platforms, such qemu/kvm, still supports
+ DT only. We still want to support Acadia kernel on such platforms.
+
+ Signed-off-by: Wei Huang <wei@redhat.com>
+
+commit cdfc19f1fbe88c1610db790ad55318d55ab00ee9
+Author: Mark Salter <msalter@redhat.com>
+Date: Thu Sep 18 21:13:05 2014 -0400
+
+ arm64/pci: fix dma coherency inheritance for PCI devices
+
+ The default dma_ops for devices on arm64 systems are noncoherent in
+ nature and rely upon special operations and bounce buffers to
+ perform a device DMA operation to/from memory. Some drivers rely
+ upon coherent operations involving suitably capable hardware. In
+ this case, a "dma-coherent" property will exist on the corresponding
+ Device Tree node for the bridge device, or one of its ancestors.
+ This patch adds support for applying a DMA coherent dma_ops for
+ PCI devices in the case of such a property.
+
+ Signed-off-by: Mark Salter <msalter@redhat.com>
+
+commit c8a62324eba5718fb43a94a168de7a81787aa94d
+Author: Mark Salter <msalter@redhat.com>
+Date: Thu Sep 18 15:05:23 2014 -0400
+
+ arm64: add sev to parking protocol
+
+ Parking protocol wakes secondary cores with an interrupt.
+ This patch adds an additional sev() to send an event. This
+ is a temporary hack for APM Mustang board and not intended
+ for upstream.
+
+ Signed-off-by: Mark Salter <msalter@redhat.com>
+
+commit e5f4ba1223515c46f1875597e77d5c32a37829ee
+Author: Mark Salter <msalter@redhat.com>
+Date: Sun Sep 14 09:44:44 2014 -0400
+
+ Revert "ahci_xgene: Skip the PHY and clock initialization if already configured by the firmware."
+
+ This reverts commit 0bed13bebd6c99d097796d2ca6c4f10fb5b2eabc.
+
+ Temporarily revert for backwards compatibility with rh-0.12-1 firmware
+
+commit aeff595a5d57264e5f01add5c43f584d88be6a92
+Author: Mark Salter <msalter@redhat.com>
+Date: Mon Aug 11 13:46:43 2014 -0400
+
+ xgene: add support for ACPI-probed serial port
+
+commit 02429d239f5ae917d870a7611a9d838b7822df1a
+Author: Mark Salter <msalter@redhat.com>
+Date: Sat Aug 9 12:01:20 2014 -0400
+
+ sata/xgene: support acpi probing
+
+ Signed-off-by: Mark Salter <msalter@redhat.com>
+
+commit 774385f250ebb7448ca3eeb344a064ac989c4988
+Author: Hanjun Guo <hanjun.guo@linaro.org>
+Date: Thu Aug 28 14:26:16 2014 -0400
+
+ ARM64 / ACPI: Introduce some PCI functions when PCI is enabled
+
+ Introduce some PCI functions to make ACPI can be compiled when
+ CONFIG_PCI is enabled, these functions should be revisited when
+ implemented on ARM64.
+
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+ [fixed up for 3.17-rc]
+ Signed-off-by: Mark Salter <msalter@redhat.com>
+
+commit 6f711c98b37f1b0a42c4a523d0380d47ed2f95b9
+Author: Al Stone <ahs3@redhat.com>
+Date: Thu Aug 28 13:14:16 2014 -0400
+
+ Fix arm64 compilation error in PNP code
+
+ Signed-off-by: Mark Salter <msalter@redhat.com>
+
+commit f874873b7cb10f827bb7f8e08fa282878f740e77
+Author: Bob Moore <robert.moore@intel.com>
+Date: Tue Sep 2 08:27:40 2014 +0800
+
+ ACPICA: Update version to 20140828.
+
+ Version 20140828.
+
+ Signed-off-by: Bob Moore <robert.moore@intel.com>
+ Signed-off-by: Lv Zheng <lv.zheng@intel.com>
+
+commit 26f9b7b90576cf808a50edf1ec86ceece9349c9f
+Author: Bob Moore <robert.moore@intel.com>
+Date: Tue Sep 2 08:27:27 2014 +0800
+
+ ACPICA: Disassembler: Fix for gpio_int interrupt polarity flags.
+
+ The field is actually 2 bits, not 1.
+
+ Signed-off-by: Bob Moore <robert.moore@intel.com>
+ Signed-off-by: Lv Zheng <lv.zheng@intel.com>
+
+commit 6e1eddc48f6f9b948be4126dd38841f6f70da080
+Author: Hanjun Guo <hanjun.guo@linaro.org>
+Date: Tue Sep 2 08:27:19 2014 +0800
+
+ ACPICA: Headers: Add GTDT flag definitions for the timer subtable.
+
+ Mostly by Hanjun Guo <hanjun.guo@linaro.org>
+
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+ Signed-off-by: Bob Moore <robert.moore@intel.com>
+ Signed-off-by: Lv Zheng <lv.zheng@intel.com>
+
+commit 1091460efb5542ba87f40ef20daff44215587f26
+Author: Hanjun Guo <hanjun.guo@linaro.org>
+Date: Tue Sep 2 08:27:12 2014 +0800
+
+ ACPICA: ACPI 5.1/Disassembler: Add GICC affinity subtable to SRAT table.
+
+ Update template for SRAT.
+ Add clock_domain to standard CPU affinity subtable.
+
+ Mostly by Hanjun Guo <hanjun.guo@linaro.org>
+
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+ Signed-off-by: Bob Moore <robert.moore@intel.com>
+ Signed-off-by: Lv Zheng <lv.zheng@intel.com>
+
+commit 02ba5e067dbb83b0f481db821d05851e9623c401
+Author: Bob Moore <robert.moore@intel.com>
+Date: Tue Sep 2 08:27:05 2014 +0800
+
+ ACPICA: Add _PSx names to the METHOD_NAME list.
+
+ Will be used by iASL.
+
+ Signed-off-by: Bob Moore <robert.moore@intel.com>
+ Signed-off-by: Lv Zheng <lv.zheng@intel.com>
+
+commit f2ecef6608a1f74b236df4f93da9b7b5aba4d3fd
+Author: Mark Salter <msalter@redhat.com>
+Date: Tue Sep 9 22:59:48 2014 -0400
+
+ arm64: add parking protocol support
+
+ This is a first-cut effort at parking protocol support. It is
+ very much a work in progress (as is the spec it is based on).
+ This code deviates from the current spec in a number of ways
+ to work around current firmware issues and issues with kernels
+ using 64K page sizes.
+
+ caveat utilitor
+
+ Signed-off-by: Mark Salter <msalter@redhat.com>
+
+commit 63e220c94f072f10bfae2e1ed375af9dbc017571
+Author: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
+Date: Tue Sep 9 15:37:15 2014 -0500
+
+ ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller
+
+ This patch adds ACPI support for non-PCI SATA contoller in ahci_platform driver.
+ It adds ACPI matching table in ahci_platform to support AMD Seattle SATA controller
+ with following ASL structure in DSDT:
+
+ Device (SATA0)
+ {
+ Name(_HID, "AMDI0600") // Seattle AHSATA
+ Name (_CCA, 1) // Cache-coherent controller
+ Name (_CRS, ResourceTemplate ()
+ {
+ Memory32Fixed (ReadWrite, 0xE0300000, 0x00010000)
+ Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive,,,) { 387 }
+ })
+ }
+
+ Since ATA driver should not require PCI support for ATA_ACPI,
+ this patch also removes dependency in the driver/ata/Kconfig.
+
+ Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
+
+commit d9d7224bd65fb3c1490f06d635b7aceb035acb1e
+Author: Graeme Gregory <graeme.gregory@linaro.org>
+Date: Wed Aug 13 13:47:18 2014 +0100
+
+ tty: SBSA compatible UART
+
+ This is a subset of pl011 UART which does not supprt DMA or baud rate
+ changing. It does, however, provide earlycon support (i.e., using
+ "earlycon=ttySBSA" on the kernel command line).
+
+ It is specified in the Server Base System Architecture document from
+ ARM.
+
+ Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
+
+commit 4c67296fce53fed671a78b698d4552636f499b7f
+Author: Mark Salter <msalter@redhat.com>
+Date: Thu Aug 14 13:17:37 2014 -0400
+
+ arm64: set dma coherency ops for ACPI probed devices
+
+ Search for a _CCA object and set the correct dma ops based
+ on device coherency attribute and architecture default.
+
+ Signed-off-by: Mark Salter <msalter@redhat.com>
+
+commit 959c571815c440150b2f290bf3d13b2fbadbee70
+Author: Mark Salter <msalter@redhat.com>
+Date: Thu Aug 14 12:32:13 2014 -0400
+
+ acpi: add utility to test for device dma coherency
+
+ ACPI 5.1 adds a _CCA object to indicate memory coherency
+ of a bus master device. It is an integer with zero meaning
+ non-coherent and one meaning coherent. This attribute may
+ be inherited from a parent device. It may also be missing
+ entirely, in which case, an architecture-specific default
+ is assumed.
+
+ This patch adds a utility function to parse a device handle
+ (and its parents) for a _CCA object and return the coherency
+ attribute if found.
+
+ Signed-off-by: Mark Salter <msalter@redhat.com>
+
+commit 0dbac48379d3aace2fd7468d83044116f176b4c9
+Author: Mark Salter <msalter@redhat.com>
+Date: Mon Sep 8 11:58:46 2014 -0400
+
+ acpi: fix acpi_os_ioremap for arm64
+
+ The acpi_os_ioremap() function may be used to map normal RAM or IO
+ regions. The current implementation simply uses ioremap_cache(). This
+ will work for some architectures, but arm64 ioremap_cache() cannot be
+ used to map IO regions which don't support caching. So for arm64, use
+ ioremap() for non-RAM regions.
+
+ Signed-off-by: Mark Salter <msalter@redhat.com>
+
+commit c9eab819c2107e0c95cf57233de4de5404851ab6
+Author: Graeme Gregory <graeme.gregory@linaro.org>
+Date: Mon Sep 8 10:36:44 2014 -0400
+
+ acpi: add arm to the platforms that use ioremap
+
+ Now with the base changes to the arm memory mapping it is safe
+ to convert to using ioremap to map in the tables.
+
+ Signed-off-by: Al Stone <al.stone@linaro.org>
+ Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
+
+commit 7e772a485f980b826a58ecd9c39fbe82085c55fa
+Author: Mark Salter <msalter@redhat.com>
+Date: Mon Sep 8 17:04:28 2014 -0400
+
+ acpi/arm64: NOT FOR UPSTREAM - remove EXPERT dependency
+
+ For convenience to keep existing configs working, remove
+ CONFIG_EXPERT dependency from ACPI for ARM64. This shouldn't
+ go upstream just yet.
+
+ Signed-off-by: Mark Salter <msalter@redhat.com>
+
+commit b42e8f7901e58b86a1cb3ffdf14cb2455fd91ede
+Author: Graeme Gregory <graeme.gregory@linaro.org>
+Date: Fri Sep 12 22:00:16 2014 +0800
+
+ Documentation: ACPI for ARM64
+
+ Add documentation for the guidelines of how to use ACPI
+ on ARM64.
+
+ Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+
+commit 57dc75b87d5663181e1c19802297e72e51a324ba
+Author: Graeme Gregory <graeme.gregory@linaro.org>
+Date: Fri Sep 12 22:00:15 2014 +0800
+
+ ARM64 / ACPI: Enable ARM64 in Kconfig
+
+ Add Kconfigs to build ACPI on ARM64, and make ACPI available on ARM64.
+
+ acpi_idle driver is x86/IA64 dependent now, so make CONFIG_ACPI_PROCESSOR
+ depend on X86 || IA64, and implement it on ARM64 in the future.
+
+ Reviewed-by: Grant Likely <grant.likely@linaro.org>
+ Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
+ Signed-off-by: Al Stone <al.stone@linaro.org>
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+
+commit 106c5cb3caff13c91cb6056f88a1c0e710b8e0eb
+Author: Al Stone <al.stone@linaro.org>
+Date: Fri Sep 12 22:00:14 2014 +0800
+
+ ARM64 / ACPI: Select ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64
+
+ ACPI reduced hardware mode is disabled by default, but ARM64
+ can only run properly in ACPI hardware reduced mode, so select
+ ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64.
+
+ Reviewed-by: Grant Likely <grant.likely@linaro.org>
+ Signed-off-by: Al Stone <al.stone@linaro.org>
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+
+commit 73f4aca21985ace8989b6fc8af503940c469f1d7
+Author: Hanjun Guo <hanjun.guo@linaro.org>
+Date: Fri Sep 12 22:00:13 2014 +0800
+
+ ARM64 / ACPI: Parse GTDT to initialize arch timer
+
+ Using the information presented by GTDT to initialize the arch
+ timer (not memory-mapped).
+
+ Originally-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+
+commit 5efba15fb24c25139dd621a417f2b9cbe2e675f5
+Author: Tomasz Nowicki <tomasz.nowicki@linaro.org>
+Date: Fri Sep 12 22:00:12 2014 +0800
+
+ ARM64 / ACPI: Add GICv2 specific ACPI boot support
+
+ ACPI kernel uses MADT table for proper GIC initialization. It needs to
+ parse GIC related subtables, collect CPU interface and distributor
+ addresses and call driver initialization function (which is hardware
+ abstraction agnostic). In a similar way, FDT initialize GICv1/2.
+
+ NOTE: This commit allow to initialize GICv1/2 basic functionality.
+ GICv2 vitalization extension, GICv3/4 and ITS are considered as next
+ steps.
+
+ Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+
+commit e060d9d74cecff59ea96d6124ffb1c9c044a4f9d
+Author: Hanjun Guo <hanjun.guo@linaro.org>
+Date: Fri Sep 12 22:00:11 2014 +0800
+
+ ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi
+
+ Introduce ACPI_IRQ_MODEL_GIC which is needed for ARM64 as GIC is
+ used, and then register device's gsi with the core IRQ subsystem.
+
+ acpi_register_gsi() is similar to DT based irq_of_parse_and_map(),
+ since gsi is unique in the system, so use hwirq number directly
+ for the mapping.
+
+ Originally-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+
+commit c25e8f66c630713107967076933b5f349655ea6a
+Author: Hanjun Guo <hanjun.guo@linaro.org>
+Date: Fri Sep 12 22:00:10 2014 +0800
+
+ ACPI / processor: Make it possible to get CPU hardware ID via GICC
+
+ Introduce a new function map_gicc_mpidr() to allow MPIDRs to be obtained
+ from the GICC Structure introduced by ACPI 5.1.
+
+ MPIDR is the CPU hardware ID as local APIC ID on x86 platform, so we use
+ MPIDR not the GIC CPU interface ID to identify CPUs.
+
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+
+commit 5ce1c3ff91aa9d8012324518789363bb4ded33d4
+Author: Hanjun Guo <hanjun.guo@linaro.org>
+Date: Fri Sep 12 22:00:09 2014 +0800
+
+ ARM64 / ACPI: Parse MADT for SMP initialization
+
+ MADT contains the information for MPIDR which is essential for
+ SMP initialization, parse the GIC cpu interface structures to
+ get the MPIDR value and map it to cpu_logical_map(), and add
+ enabled cpu with valid MPIDR into cpu_possible_map.
+
+ ACPI 5.1 only has two explicit methods to boot up SMP, PSCI and
+ Parking protocol, but the Parking protocol is only specified for
+ ARMv7 now, so make PSCI as the only way for the SMP boot protocol
+ before some updates for the ACPI spec or the Parking protocol spec.
+
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+ Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
+
+commit 8634cf0fcc8294c355d7cecb55da017ba9ff3ff7
+Author: Hanjun Guo <hanjun.guo@linaro.org>
+Date: Fri Sep 12 22:00:08 2014 +0800
+
+ ACPI / table: Print GIC information when MADT is parsed
+
+ When MADT is parsed, print GIC information to make the boot
+ log look pretty.
+
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+ Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
+
+commit 05facef9c824235c82d8d9c2ae03fe7a729ceef8
+Author: Hanjun Guo <hanjun.guo@linaro.org>
+Date: Fri Sep 12 22:00:07 2014 +0800
+
+ ARM64 / ACPI: Parse FADT table to get PSCI flags for PSCI init
+
+ There are two flags: PSCI_COMPLIANT and PSCI_USE_HVC. When set,
+ the former signals to the OS that the firmware is PSCI compliant.
+ The latter selects the appropriate conduit for PSCI calls by
+ toggling between Hypervisor Calls (HVC) and Secure Monitor Calls
+ (SMC).
+
+ FADT table contains such information, parse FADT to get the flags
+ for PSCI init. Since ACPI 5.1 doesn't support self defined PSCI
+ function IDs, which means that only PSCI 0.2+ is supported in ACPI.
+
+ At the same time, only ACPI 5.1 or higher verison supports PSCI,
+ and FADT Major.Minor version was introduced in ACPI 5.1, so we
+ will check the version and only parse FADT table with version >= 5.1.
+
+ If firmware provides ACPI tables with ACPI version less than 5.1,
+ OS will be messed up with those information and have no way to init
+ smp and GIC, so disable ACPI if we get an FADT table with version
+ less that 5.1.
+
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+ Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
+ Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
+
+commit a13a8c748b6170a8a3f4876163ff74e460bd889f
+Author: Hanjun Guo <hanjun.guo@linaro.org>
+Date: Fri Sep 12 22:00:06 2014 +0800
+
+ ARM64 / ACPI: Make PCI optional for ACPI on ARM64
+
+ As PCI for ARM64 is not ready, so introduce some stub functions
+ to make PCI optional for ACPI, and make ACPI core run without
+ CONFIG_PCI on ARM64.
+
+ Since ACPI on X86 and IA64 depends on PCI and this patch only makes
+ PCI optional for ARM64, it will not break anything on X86 and IA64.
+
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+
+commit a6bf98355490142fc3f6e9c0839af128e326f16d
+Author: Graeme Gregory <graeme.gregory@linaro.org>
+Date: Fri Sep 12 22:00:05 2014 +0800
+
+ ARM64 / ACPI: If we chose to boot from acpi then disable FDT
+
+ If the early boot methods of acpi are happy that we have valid ACPI
+ tables and acpi=off has not been passed. Then do not unflat
+ devicetree effectively disabling further hardware probing from DT.
+
+ Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+
+commit e3b9886532d1e13ddb68e4955ad776a8623f9766
+Author: Al Stone <al.stone@linaro.org>
+Date: Fri Sep 12 22:00:04 2014 +0800
+
+ ARM64 / ACPI: Introduce early_param for "acpi"
+
+ Introduce one early parameters "off" for "acpi" to disable ACPI on
+ ARM64.
+
+ This ensures the kernel uses the DT on a platform that provides both
+ ACPI tables and DT.
+
+ Signed-off-by: Al Stone <al.stone@linaro.org>
+ Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+
+commit cf1cbe39385d417286a98e3abd7ea3456be2e88c
+Author: Graeme Gregory <graeme.gregory@linaro.org>
+Date: Fri Sep 12 22:00:03 2014 +0800
+
+ ARM64 / ACPI: Introduce sleep-arm.c
+
+ ACPI 5.1 does not currently support S states for ARM64 hardware but
+ ACPI code will call acpi_target_system_state() for device power
+ managment, so introduce sleep-arm.c to allow other drivers to function
+ until S states are defined.
+
+ Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
+ Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+
+commit 90e5cfbaf183d0eb92f1977c24da20c4e0a2f6be
+Author: Al Stone <al.stone@linaro.org>
+Date: Fri Sep 12 22:00:02 2014 +0800
+
+ ARM64 / ACPI: Get RSDP and ACPI boot-time tables
+
+ As we want to get ACPI tables to parse and then use the information
+ for system initialization, we should get the RSDP (Root System
+ Description Pointer) first, it then locates Extended Root Description
+ Table (XSDT) which contains all the 64-bit physical address that
+ pointer to other boot-time tables.
+
+ Introduce acpi.c and its related head file in this patch to provide
+ fundamental needs of extern variables and functions for ACPI core,
+ and then get boot-time tables as needed.
+ - asm/acenv.h for arch specific ACPICA environments and
+ implementation, It is needed unconditionally by ACPI core;
+ - asm/acpi.h for arch specific variables and functions needed by
+ ACPI driver core;
+ - acpi.c for ARM64 related ACPI implementation for ACPI driver
+ core;
+
+ acpi_boot_table_init() is introduced to get RSDP and boot-time tables,
+ it will be called in setup_arch() before paging_init(), so we should
+ use eary_memremap() mechanism here to get the RSDP and all the table
+ pointers.
+
+ Signed-off-by: Al Stone <al.stone@linaro.org>
+ Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
+ Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+
+commit 2fe5d24887dea3f1bffabf04e364fa9f355ed553
+Author: Tomasz Nowicki <tomasz.nowicki@linaro.org>
+Date: Fri Sep 12 22:00:01 2014 +0800
+
+ ACPI / table: Count matched and successfully parsed entries without specifying max entries
+
+ It is very useful to traverse all available table entries without max
+ number of expected entries type. Current acpi_parse_entries()
+ implementation gives that feature but it does not count those entries,
+ it returns 0 instead, so fix it to count matched and successfully
+ entries and return it.
+
+ NOTE: This change has no impact to x86 and ia64 archs since existing code
+ checks for error occurrence only (acpi_parse_entries(...,0) < 0).
+
+ Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+
+commit 8c278c76231f0ba0110e755678eefdd6d077f5da
+Author: Ashwin Chaugule <ashwin.chaugule@linaro.org>
+Date: Fri Sep 12 22:00:00 2014 +0800
+
+ ACPI / table: Add new function to get table entries
+
+ The acpi_table_parse() function has a callback that
+ passes a pointer to a table_header. Add a new function
+ which takes this pointer and parses its entries. This
+ eliminates the need to re-traverse all the tables for
+ each call. e.g. as in acpi_table_parse_madt() which is
+ normally called after acpi_table_parse().
+
+ Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
+ Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+
+commit 651ab5ff6804fa0f516715b4d47399e587944de0
+Author: Hanjun Guo <hanjun.guo@linaro.org>
+Date: Fri Sep 12 21:59:59 2014 +0800
+
+ ARM64: Move the init of cpu_logical_map(0) before unflatten_device_tree()
+
+ It always make sense to initialize CPU0's logical map entry from the
+ hardware values, so move the initialization of cpu_logical_map(0)
+ before unflatten_device_tree() which is needed by ACPI code later.
+
+ Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
+
+commit b91246f1a7120de6de8fe630ed01e9a0d0415e88
+Author: Tanmay Inamdar <tinamdar@apm.com>
+Date: Fri Sep 26 14:08:27 2014 -0700
+
+ MAINTAINERS: entry for APM X-Gene PCIe host driver
+
+ Add entry for AppliedMicro X-Gene PCIe host driver.
+
+ Signed-off-by: Tanmay Inamdar <tinamdar@apm.com>
+
+commit d20b104083718058b599a5ca1a925d8c5243e2e1
+Author: Tanmay Inamdar <tinamdar@apm.com>
+Date: Fri Sep 26 14:08:26 2014 -0700
+
+ dt-bindings: pci: xgene pcie device tree bindings
+
+ This patch adds the bindings for X-Gene PCIe driver. The driver resides
+ under 'drivers/pci/host/pci-xgene.c' file.
+
+ Signed-off-by: Tanmay Inamdar <tinamdar@apm.com>
+
+commit 9c429c919b77a3a63ac2843e9e0e2e50e59d28f3
+Author: Tanmay Inamdar <tinamdar@apm.com>
+Date: Fri Sep 26 14:08:25 2014 -0700
+
+ arm64: dts: APM X-Gene PCIe device tree nodes
+
+ This patch adds the device tree nodes for APM X-Gene PCIe host controller and
+ PCIe clock interface. Since X-Gene SOC supports maximum 5 ports, 5 dts
+ nodes are added.
+
+ Signed-off-by: Tanmay Inamdar <tinamdar@apm.com>
+
+commit 3aa4f71932b67e648aff4ae0dc5ace7162d74c1c
+Author: Tanmay Inamdar <tinamdar@apm.com>
+Date: Fri Sep 26 14:08:24 2014 -0700
+
+ pci:host: APM X-Gene PCIe host controller driver
+
+ This patch adds the AppliedMicro X-Gene SOC PCIe host controller driver.
+ X-Gene PCIe controller supports maximum up to 8 lanes and GEN3 speed.
+ X-Gene SOC supports maximum 5 PCIe ports.
+
+ Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
+ Tested-by: Ming Lei <ming.lei@canonical.com>
+ Tested-by: Dann Frazier <dann.frazier@canonical.com>
+ Signed-off-by: Tanmay Inamdar <tinamdar@apm.com>
+
+commit f3c00bd4ae49b19923049f0f4f9d6a95eaa61b1e
+Author: Liviu Dudau <Liviu.Dudau@arm.com>
+Date: Tue Sep 23 20:01:14 2014 +0100
+
+ arm64: Add architectural support for PCI
+
+ Use the generic PCI domain and OF functions to provide support for PCI
+ on arm64.
+
+ [bhelgaas: Change comments to use generic PCI, not just PCIe. Nothing at
+ this level is PCIe-specific.]
+ Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
+ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+ Acked-by: Catalin Marinas <catalin.marinas@arm.com>
+
+commit 497220defa08534526ad7b20a9c7eb2d0d903ca4
+Author: Liviu Dudau <Liviu.Dudau@arm.com>
+Date: Tue Sep 23 20:01:13 2014 +0100
+
+ PCI: Add pci_remap_iospace() to map bus I/O resources
+
+ Add pci_remap_iospace() to map bus I/O resources into the CPU virtual
+ address space. Architectures with special needs may provide their own
+ version, but most should be able to use this one.
+
+ This function is useful for PCI host bridge drivers that need to map the
+ PCI I/O resources into virtual memory space.
+
+ [bhelgaas: phys_addr description, drop temporary "err" variable]
+ Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
+ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+ Reviewed-by: Rob Herring <robh@kernel.org>
+ Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
+ CC: Arnd Bergmann <arnd@arndb.de>
+
+commit 7a46ace11cf09b3713dcdc2ef4a17130a738f856
+Author: Liviu Dudau <Liviu.Dudau@arm.com>
+Date: Tue Sep 23 20:01:12 2014 +0100
+
+ PCI: Assign unassigned bus resources in pci_scan_root_bus()
+
+ If the firmware has not assigned all the bus resources and we are not just
+ probing the PCI buses, it makes sense to assign the unassigned resources
+ in pci_scan_root_bus().
+
+ Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
+ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+ CC: Arnd Bergmann <arnd@arndb.de>
+ CC: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
+ CC: Rob Herring <robh+dt@kernel.org>
+
+commit fe33bc876010c3ef700c863099f2c3c1a5e2c18b
+Author: Liviu Dudau <Liviu.Dudau@arm.com>
+Date: Wed Sep 24 11:27:33 2014 -0600
+
+ of/pci: Add support for parsing PCI host bridge resources from DT
+
+ Provide a function to parse the PCI DT ranges that can be used to create a
+ pci_host_bridge structure together with its associated bus.
+
+ Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
+ [make io_base parameter optional]
+ Signed-off-by: Robert Richter <rrichter@cavium.com>
+ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+ CC: Arnd Bergmann <arnd@arndb.de>
+ CC: Grant Likely <grant.likely@linaro.org>
+ CC: Rob Herring <robh+dt@kernel.org>
+ CC: Catalin Marinas <catalin.marinas@arm.com>
+
+commit 71094afda69ac873bb3d6486307e3048e21e912c
+Author: Liviu Dudau <Liviu.Dudau@arm.com>
+Date: Tue Sep 23 20:01:10 2014 +0100
+
+ of/pci: Add of_pci_get_domain_nr() and of_get_pci_domain_nr()
+
+ Add pci_get_new_domain_nr() to allocate a new domain number and
+ of_get_pci_domain_nr() to retrieve the PCI domain number of a given device
+ from DT. Host bridge drivers or architecture-specific code can choose to
+ implement their PCI domain number policy using these two functions.
+
+ Using of_get_pci_domain_nr() guarantees a stable PCI domain number on every
+ boot provided that all host bridge controllers are assigned a number in the
+ device tree using "linux,pci-domain" property. Mixing use of
+ pci_get_new_domain_nr() and of_get_pci_domain_nr() is not recommended as it
+ can lead to potentially conflicting domain numbers being assigned to root
+ buses behind different host bridges.
+
+ Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
+ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+ CC: Arnd Bergmann <arnd@arndb.de>
+ CC: Grant Likely <grant.likely@linaro.org>
+ CC: Rob Herring <robh+dt@kernel.org>
+ CC: Catalin Marinas <catalin.marinas@arm.com>
+
+commit 6b385455f18d15da6b5d60a3b67fdb846ae1a3b1
+Author: Catalin Marinas <catalin.marinas@arm.com>
+Date: Tue Sep 23 20:01:09 2014 +0100
+
+ PCI: Add generic domain handling
+
+ The handling of PCI domains (or PCI segments in ACPI speak) is usually a
+ straightforward affair but its implementation is currently left to the
+ architectural code, with pci_domain_nr(b) querying the value of the domain
+ associated with bus b.
+
+ This patch introduces CONFIG_PCI_DOMAINS_GENERIC as an option that can be
+ selected if an architecture wants a simple implementation where the value
+ of the domain associated with a bus is stored in struct pci_bus.
+
+ The architectures that select CONFIG_PCI_DOMAINS_GENERIC will then have to
+ implement pci_bus_assign_domain_nr() as a way of setting the domain number
+ associated with a root bus. All child buses except the root bus will
+ inherit the domain_nr value from their parent.
+
+ Signed-off-by: Catalin Marinas <Catalin.Marinas@arm.com>
+ [Renamed pci_set_domain_nr() to pci_bus_assign_domain_nr()]
+ Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
+ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+ CC: Arnd Bergmann <arnd@arndb.de>
+
+commit 04b36e0e1da5a96a58dec4f1b393090f00e5b635
+Author: Liviu Dudau <Liviu.Dudau@arm.com>
+Date: Tue Sep 23 20:01:08 2014 +0100
+
+ PCI: Create pci_host_bridge before root bus
+
+ Before 7b5436635800 ("PCI: add generic device into pci_host_bridge
+ struct"), the pci_host_bridge was created before the root bus. Revert the
+ order of creation as we are going to depend on the pci_host_bridge
+ structure to retrieve the domain number of the root bus.
+
+ [bhelgaas: changelog]
+ Tested-by: Tanmay Inamdar <tinamdar@apm.com>
+ Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
+ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+ Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
+ Acked-by: Grant Likely <grant.likely@linaro.org>
+
+commit 7569c510218798bd7e5216bf14a42c656f14e891
+Author: Liviu Dudau <Liviu.Dudau@arm.com>
+Date: Tue Sep 23 20:01:07 2014 +0100
+
+ of/pci: Fix the conversion of IO ranges into IO resources
+
+ The ranges property for a host bridge controller in DT describes the
+ mapping between the PCI bus address and the CPU physical address. The
+ resources framework however expects that the IO resources start at a pseudo
+ "port" address 0 (zero) and have a maximum size of IO_SPACE_LIMIT. The
+ conversion from PCI ranges to resources failed to take that into account,
+ returning a CPU physical address instead of a port number.
+
+ Also fix all the drivers that depend on the old behaviour by fetching the
+ CPU physical address based on the port number where it is being needed.
+
+ Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
+ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+ Acked-by: Linus Walleij <linus.walleij@linaro.org>
+ CC: Grant Likely <grant.likely@linaro.org>
+ CC: Rob Herring <robh+dt@kernel.org>
+ CC: Arnd Bergmann <arnd@arndb.de>
+ CC: Thierry Reding <thierry.reding@gmail.com>
+ CC: Simon Horman <horms@verge.net.au>
+ CC: Catalin Marinas <catalin.marinas@arm.com>
+
+commit 1b381671c9dd2c82cd6f04bc1588d0fc4e1aea59
+Author: Liviu Dudau <Liviu.Dudau@arm.com>
+Date: Tue Sep 23 20:01:06 2014 +0100
+
+ of/pci: Move of_pci_range_to_resources() to of/address.c
+
+ We need to enhance of_pci_range_to_resources() enough that it won't make
+ sense for it to be inline anymore. Move it to drivers/of/address.c,
+ keeping it under #ifdef CONFIG_PCI.
+
+ [bhelgaas: drop extra detail from changelog, move def under CONFIG_PCI]
+ Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
+ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+ CC: Grant Likely <grant.likely@linaro.org>
+ CC: Rob Herring <robh+dt@kernel.org>
+ CC: Arnd Bergmann <arnd@arndb.de>
+ CC: Catalin Marinas <catalin.marinas@arm.com>
+
+commit eedd8f88d4895d5c6bc46cf3ddeb114a0fafb7c3
+Author: Bjorn Helgaas <bhelgaas@google.com>
+Date: Tue Sep 23 17:27:42 2014 -0600
+
+ of/pci: Define of_pci_range_to_resource() only when CONFIG_PCI=y
+
+ of_pci_range_to_resource() was previously defined always, but it's only
+ used by PCI code, so move the definition inside the CONFIG_OF_ADDRESS &&
+ CONFIG_PCI block.
+
+ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+
+commit 4ac73f8ded507537318717bb2b5b6c765db633cd
+Author: Liviu Dudau <Liviu.Dudau@arm.com>
+Date: Tue Sep 23 20:01:05 2014 +0100
+
+ ARM: Define PCI_IOBASE as the base of virtual PCI IO space
+
+ This is needed for calls into OF code that parses PCI ranges. It signals
+ support for memory mapped PCI I/O accesses that are described by device
+ trees.
+
+ Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
+ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+ Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
+ Acked-by: Arnd Bergmann <arnd@arndb.de>
+ CC: Russell King <linux@arm.linux.org.uk>
+ CC: Rob Herring <robh+dt@kernel.org>
+
+commit ce7af33b6db857c95ac3b65fef37e589e839cc79
+Author: Liviu Dudau <Liviu.Dudau@arm.com>
+Date: Tue Sep 23 20:01:04 2014 +0100
+
+ of/pci: Add pci_register_io_range() and pci_pio_to_address()
+
+ Some architectures do not have a simple view of the PCI I/O space and
+ instead use a range of CPU addresses that map to bus addresses. For some
+ architectures these ranges will be expressed by OF bindings in a device
+ tree file.
+
+ This patch introduces a pci_register_io_range() helper function with a
+ generic implementation that can be used by such architectures to keep track
+ of the I/O ranges described by the PCI bindings. If the PCI_IOBASE macro
+ is not defined, that signals lack of support for PCI and we return an
+ error.
+
+ In order to retrieve the CPU address associated with an I/O port, a new
+ helper function pci_pio_to_address() is introduced. This will search in
+ the list of ranges registered with pci_register_io_range() and return the
+ CPU address that corresponds to the given port.
+
+ Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
+ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+ Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
+ Acked-by: Rob Herring <robh@kernel.org>
+ CC: Grant Likely <grant.likely@linaro.org>
+ CC: Arnd Bergmann <arnd@arndb.de>
+
+commit c5d57f95901af49149ebf6dfc3d7518157e41bfa
+Author: Liviu Dudau <Liviu.Dudau@arm.com>
+Date: Tue Sep 23 20:01:03 2014 +0100
+
+ asm-generic/io.h: Fix ioport_map() for !CONFIG_GENERIC_IOMAP
+
+ The !CONFIG_GENERIC_IOMAP version of ioport_map() is wrong. It returns a
+ mapped, i.e., virtual, address that can start from zero and completely
+ ignores the PCI_IOBASE and IO_SPACE_LIMIT that most architectures that use
+ !CONFIG_GENERIC_MAP define.
+
+ Tested-by: Tanmay Inamdar <tinamdar@apm.com>
+ Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
+ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+ Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
+ Acked-by: Arnd Bergmann <arnd@arndb.de>
+
+commit a65e51156bec2c8d690b924bbddf1a740309e543
+Author: Mark Salter <msalter@redhat.com>
+Date: Tue Jun 24 09:50:28 2014 -0400
+
+ arm64: use EFI as last resort for reboot and poweroff
+
+ Wire in support for EFI reboot and poweroff functions. We use these
+ only if no other mechanism has been registered with arm_pm_reboot
+ and/or pm_power_off respectively.
+
+ Signed-off-by: Mark Salter <msalter@redhat.com>
+
+commit c6b81122978c39e52021cc7308edafff88c8b87a
+Author: Ard Biesheuvel <ard.biesheuvel@linaro.org>
+Date: Wed Jul 30 11:59:04 2014 +0100
+
+ arm64/efi: efistub: don't abort if base of DRAM is occupied
+
+ If we cannot relocate the kernel Image to its preferred offset of base of DRAM
+ plus TEXT_OFFSET, instead relocate it to the lowest available 2 MB boundary plus
+ TEXT_OFFSET. We may lose a bit of memory at the low end, but we can still
+ proceed normally otherwise.
+
+ Acked-by: Mark Salter <msalter@redhat.com>
+ Acked-by: Mark Rutland <mark.rutland@arm.com>
+ Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
+ Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
+ Signed-off-by: Will Deacon <will.deacon@arm.com>
+
+commit 81fd1d315f3c5b13f9dcf71cce51dfd3a10331c3
+Author: Ard Biesheuvel <ard.biesheuvel@linaro.org>
+Date: Wed Jul 30 11:59:03 2014 +0100
+
+ arm64/efi: efistub: cover entire static mem footprint in PE/COFF .text
+
+ The static memory footprint of a kernel Image at boot is larger than the
+ Image file itself. Things like .bss data and initial page tables are allocated
+ statically but populated dynamically so their content is not contained in the
+ Image file.
+
+ However, if EFI (or GRUB) has loaded the Image at precisely the desired offset
+ of base of DRAM + TEXT_OFFSET, the Image will be booted in place, and we have
+ to make sure that the allocation done by the PE/COFF loader is large enough.
+
+ Fix this by growing the PE/COFF .text section to cover the entire static
+ memory footprint. The part of the section that is not covered by the payload
+ will be zero initialised by the PE/COFF loader.
+
+ Acked-by: Mark Salter <msalter@redhat.com>
+ Acked-by: Mark Rutland <mark.rutland@arm.com>
+ Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
+ Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
+ Signed-off-by: Will Deacon <will.deacon@arm.com>
+
+commit 8f5f73c2117c2dc4e8903d162023c34177327ae3
+Author: Mark Rutland <mark.rutland@arm.com>
+Date: Wed Jul 30 11:59:02 2014 +0100
+
+ arm64: spin-table: handle unmapped cpu-release-addrs
+
+ In certain cases the cpu-release-addr of a CPU may not fall in the
+ linear mapping (e.g. when the kernel is loaded above this address due to
+ the presence of other images in memory). This is problematic for the
+ spin-table code as it assumes that it can trivially convert a
+ cpu-release-addr to a valid VA in the linear map.
+
+ This patch modifies the spin-table code to use a temporary cached
+ mapping to write to a given cpu-release-addr, enabling us to support
+ addresses regardless of whether they are covered by the linear mapping.
+
+ Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
+ Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
+ Tested-by: Mark Salter <msalter@redhat.com>
+ Signed-off-by: Mark Rutland <mark.rutland@arm.com>
+ [ardb: added (__force void *) cast]
+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
+ Signed-off-by: Will Deacon <will.deacon@arm.com>
+
+commit b00c56bff1ffb6c77655479fb350ee3d5c8bcf63
+Author: Mark Salter <msalter@redhat.com>
+Date: Tue Jun 24 23:16:45 2014 -0400
+
+ perf: fix arm64 build error
+
+ I'm seeing the following build error on arm64:
+
+ In file included from util/event.c:3:0:
+ util/event.h:95:17: error: 'PERF_REGS_MAX' undeclared here (not in a function)
+ u64 cache_regs[PERF_REGS_MAX];
+ ^
+
+ This patch adds a PEFF_REGS_MAX definition for arm64.
+
+ Signed-off-by: Mark Salter <msalter@redhat.com>
+
+commit f440dcb067bf1367719e8a41b96a2a83c1232690
+Author: Mark Salter <msalter@redhat.com>
+Date: Thu Jul 17 13:34:50 2014 -0400
+
+ ahci_xgene: add errata workaround for ATA_CMD_SMART
+
+ commit 2a0bdff6b958d1b2:
+
+ ahci_xgene: fix the dma state machine lockup for the IDENTIFY DEVICE PIO mode command.
+
+ added a workaround for X-Gene AHCI controller errata. This was done
+ for all ATA_CMD_ID_ATA commands. The errata also appears to affect
+ ATA_CMD_SMART commands as well. This was discovered when running
+ smartd or just smartctl -x. This patch adds a dma engine restart for
+ ATA_CMD_SMART commands which clears up the issues seen with smartd.
+
+ Signed-off-by: Mark Salter <msalter@redhat.com>
+
+commit 93b44dc9e1d73d4864a9350888509792f25e4210
+Author: Kyle McMartin <kmcmarti@redhat.com>
+Date: Tue May 13 22:25:26 2014 -0400
+
+ arm64: don't set READ_IMPLIES_EXEC for EM_AARCH64 ELF objects
+
+ Message-id: <20140513222526.GC26038@redacted.bos.redhat.com>
+ Patchwork-id: 79789
+ O-Subject: [ACADIA PATCH] arm64: don't set READ_IMPLIES_EXEC for EM_AARCH64 ELF objects
+ Bugzilla: 1085528
+
+ BZ: https://bugzilla.redhat.com/show_bug.cgi?id=1085528
+ Upstream: submitted soon
+
+ [Sadly this isn't (yet) sufficient... but it fixes at least one issue
+ here... cat /proc/$$/personality shows READ_IMPLIES_EXEC before. I'll
+ try to figure the rest out tomorrow.]
+
+ Currently, we're accidentally ending up with executable stacks on
+ AArch64 when the ABI says we shouldn't be, and relying on glibc to fix
+ things up for us when we're loaded. However, SELinux will deny us
+ mucking with the stack, and hit us with execmem AVCs.
+
+ The reason this is happening is somewhat complex:
+
+ fs/binfmt_elf.c:load_elf_binary()
+ - initializes executable_stack = EXSTACK_DEFAULT implying the
+ architecture should make up its mind.
+ - does a pile of loading goo
+ - runs through the program headers, looking for PT_GNU_STACK
+ and setting (or unsetting) executable_stack if it finds it.
+
+ This is our first problem, we won't generate these unless an
+ executable stack is explicitly requested.
+
+ - more ELF loading goo
+ - sets whether we're a compat task or not (TIF_32BIT) based on compat.h
+ - for compat reasons (pre-GNU_STACK) checks if the READ_IMPLIES_EXEC
+ flag should be set for ancient toolchains
+
+ Here's our second problem, we test if read_implies_exec based on
+ stk != EXSTACK_DISABLE_X, which is true since stk == EXSTACK_DEFAULT.
+
+ So we set current->personality |= READ_IMPLIES_EXEC like a broken
+ legacy toolchain would want.
+
+ - Now we call setup_arg_pages to set up the stack...
+
+ fs/exec.c:setup_arg_pages()
+ - lots of magic happens here
+ - vm_flags gets initialized to VM_STACK_FLAGS
+
+ Here's our third problem, VM_STACK_FLAGS on arm64 is
+ VM_DEFAULT_DATA_FLAG which tests READ_IMPLIES_EXEC and sets VM_EXEC
+ if it's true. So we end up with an executable stack mapping, since we
+ don't have executable_stack set (it's still EXSTACK_DEFAULT at this
+ point) to unset it anywhere.
+
+ Bang. execstack AVC when the program starts running.
+
+ The easiest way I can see to fix this is to test if we're a legacy task
+ and fix it up there. But that's not as simple as it sounds, because
+ the 32-bit ABI depends on what revision of the CPU we've enabled (not
+ that it matters since we're ARMv8...) Regardless, in the compat case,
+ set READ_IMPLIES_EXEC if we've found a GNU_STACK header which explicitly
+ requested it as in arch/arm/kernel/elf.c:arm_elf_read_implies_exec().
+
+ Signed-off-by: Kyle McMartin <kmcmarti@redhat.com>
+ Signed-off-by: Donald Dutile <ddutile@redhat.com>
+
Documentation/arm64/arm-acpi.txt | 218 +++++++
.../devicetree/bindings/pci/xgene-pci.txt | 57 ++
Documentation/kernel-parameters.txt | 3 +-
@@ -31,13 +1260,13 @@
arch/arm64/kernel/pci.c | 70 +++
arch/arm64/kernel/process.c | 6 +
arch/arm64/kernel/psci.c | 78 ++-
- arch/arm64/kernel/setup.c | 42 +-
+ arch/arm64/kernel/setup.c | 64 +-
arch/arm64/kernel/smp.c | 2 +-
arch/arm64/kernel/smp_parking_protocol.c | 110 ++++
arch/arm64/kernel/smp_spin_table.c | 22 +-
arch/arm64/kernel/time.c | 7 +
arch/arm64/kvm/hyp-init.S | 20 +-
- arch/arm64/mm/dma-mapping.c | 65 +++
+ arch/arm64/mm/dma-mapping.c | 65 ++
arch/arm64/pci/Makefile | 1 +
arch/arm64/pci/pci.c | 28 +
drivers/acpi/Kconfig | 6 +-
@@ -57,12 +1286,18 @@
drivers/irqchip/irq-gic-v3.c | 10 +
drivers/irqchip/irq-gic.c | 116 ++++
drivers/irqchip/irqchip.c | 3 +
+ drivers/net/ethernet/amd/xgbe/xgbe-dev.c | 12 +
+ drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 3 +
+ drivers/net/ethernet/amd/xgbe/xgbe-main.c | 1 +
+ drivers/net/ethernet/amd/xgbe/xgbe.h | 3 +
+ drivers/net/ethernet/smsc/smc91x.c | 10 +
+ drivers/net/phy/amd-xgbe-phy.c | 408 +++++++------
drivers/of/address.c | 154 +++++
drivers/of/of_pci.c | 142 +++++
drivers/pci/host/Kconfig | 10 +
drivers/pci/host/Makefile | 1 +
drivers/pci/host/pci-tegra.c | 10 +-
- drivers/pci/host/pci-xgene.c | 646 +++++++++++++++++++++
+ drivers/pci/host/pci-xgene.c | 659 +++++++++++++++++++++
drivers/pci/host/pcie-rcar.c | 21 +-
drivers/pci/pci.c | 40 ++
drivers/pci/probe.c | 46 +-
@@ -71,6 +1306,7 @@
drivers/tty/Makefile | 1 +
drivers/tty/sbsauart.c | 355 +++++++++++
drivers/tty/serial/8250/8250_dw.c | 9 +
+ drivers/virtio/virtio_mmio.c | 12 +-
include/acpi/acnames.h | 4 +
include/acpi/acpi_bus.h | 2 +
include/acpi/acpi_io.h | 6 +
@@ -92,7 +1328,7 @@
virt/kvm/arm/vgic-v2.c | 75 ++-
virt/kvm/arm/vgic-v3.c | 8 +-
virt/kvm/arm/vgic.c | 32 +-
- 94 files changed, 3840 insertions(+), 275 deletions(-)
+ 101 files changed, 4112 insertions(+), 487 deletions(-)
diff --git a/Documentation/arm64/arm-acpi.txt b/Documentation/arm64/arm-acpi.txt
new file mode 100644
@@ -403,10 +1639,10 @@ index 10d51c2..9464c6d 100644
See also Documentation/power/runtime_pm.txt, pci=noacpi
diff --git a/MAINTAINERS b/MAINTAINERS
-index 670b3dc..b18bc49 100644
+index 3705430..f6b49e4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
-@@ -6942,6 +6942,14 @@ L: linux-pci@vger.kernel.org
+@@ -6940,6 +6940,14 @@ L: linux-pci@vger.kernel.org
S: Maintained
F: drivers/pci/host/*spear*
@@ -2059,7 +3295,7 @@ index 5539547..15ba470 100644
static int __init cpu_psci_cpu_init(struct device_node *dn, unsigned int cpu)
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
-index edb146d..4758443 100644
+index edb146d..a793a20 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -43,6 +43,7 @@
@@ -2142,6 +3378,32 @@ index edb146d..4758443 100644
static int __init arm64_device_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+@@ -505,3 +535,25 @@ const struct seq_operations cpuinfo_op = {
+ .stop = c_stop,
+ .show = c_show
+ };
++
++/*
++ * Temporary hack to avoid need for console= on command line
++ */
++static int __init arm64_console_setup(void)
++{
++ /* Allow cmdline to override our assumed preferences */
++ if (console_set_on_cmdline)
++ return 0;
++
++ if (IS_ENABLED(CONFIG_SBSAUART_TTY))
++ add_preferred_console("ttySBSA", 0, "115200");
++
++ if (IS_ENABLED(CONFIG_SERIAL_AMBA_PL011))
++ add_preferred_console("ttyAMA", 0, "115200");
++
++ if (IS_ENABLED(CONFIG_SERIAL_8250))
++ add_preferred_console("ttyS", 0, "115200");
++
++ return 0;
++}
++early_initcall(arm64_console_setup);
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 4743397..4e390ac 100644
--- a/arch/arm64/kernel/smp.c
@@ -3455,6 +4717,690 @@ index 0fe2f71..9106c6d 100644
+
+ acpi_gic_init();
}
+diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
+index ea27383..d0d3ab5 100644
+--- a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
++++ b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
+@@ -696,6 +696,18 @@ static int xgbe_read_mmd_regs(struct xgbe_prv_data *pdata, int prtad,
+ else
+ mmd_address = (pdata->mdio_mmd << 16) | (mmd_reg & 0xffff);
+
++ if (XGBE_SEATTLE_A0) {
++ /* The PCS implementation has reversed the devices in
++ * package registers so we need to change 05 to 06 and
++ * 06 to 05 if being read (these registers are readonly
++ * so no need to do this in the write function)
++ */
++ if ((mmd_address & 0xffff) == 0x05)
++ mmd_address = (mmd_address & ~0xffff) | 0x06;
++ else if ((mmd_address & 0xffff) == 0x06)
++ mmd_address = (mmd_address & ~0xffff) | 0x05;
++ }
++
+ /* The PCS registers are accessed using mmio. The underlying APB3
+ * management interface uses indirect addressing to access the MMD
+ * register sets. This requires accessing of the PCS register in two
+diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+index b26d758..ca7895c 100644
+--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
++++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+@@ -426,6 +426,9 @@ void xgbe_get_all_hw_features(struct xgbe_prv_data *pdata)
+ hw_feat->rx_ch_cnt++;
+ hw_feat->tx_ch_cnt++;
+
++ /* A0 does not support NUMTC, hardcode it for now */
++ hw_feat->tc_cnt = XGBE_TC_CNT;
++
+ DBGPR("<--xgbe_get_all_hw_features\n");
+ }
+
+diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-main.c b/drivers/net/ethernet/amd/xgbe/xgbe-main.c
+index bdf9cfa..ba53e41 100644
+--- a/drivers/net/ethernet/amd/xgbe/xgbe-main.c
++++ b/drivers/net/ethernet/amd/xgbe/xgbe-main.c
+@@ -533,6 +533,7 @@ static int xgbe_resume(struct device *dev)
+ #endif /* CONFIG_PM */
+
+ static const struct of_device_id xgbe_of_match[] = {
++ { .compatible = "amd,xgbe-seattle-v0a", },
+ { .compatible = "amd,xgbe-seattle-v1a", },
+ {},
+ };
+diff --git a/drivers/net/ethernet/amd/xgbe/xgbe.h b/drivers/net/ethernet/amd/xgbe/xgbe.h
+index e9fe6e6..389bfec 100644
+--- a/drivers/net/ethernet/amd/xgbe/xgbe.h
++++ b/drivers/net/ethernet/amd/xgbe/xgbe.h
+@@ -187,8 +187,11 @@
+ #define XGBE_FIFO_SIZE_B(x) (x)
+ #define XGBE_FIFO_SIZE_KB(x) (x * 1024)
+
++#define XGBE_TC_CNT 2
+ #define XGBE_TC_MIN_QUANTUM 10
+
++#define XGBE_SEATTLE_A0 ((read_cpuid_id() & 0x00f0000f) == 0)
++
+ /* Helper macro for descriptor handling
+ * Always use XGBE_GET_DESC_DATA to access the descriptor data
+ * since the index is free-running and needs to be and-ed
+diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
+index bcaa41a..ebad872 100644
+--- a/drivers/net/ethernet/smsc/smc91x.c
++++ b/drivers/net/ethernet/smsc/smc91x.c
+@@ -81,6 +81,7 @@ static const char version[] =
+ #include <linux/workqueue.h>
+ #include <linux/of.h>
+ #include <linux/of_device.h>
++#include <linux/acpi.h>
+
+ #include <linux/netdevice.h>
+ #include <linux/etherdevice.h>
+@@ -2408,6 +2409,14 @@ static struct dev_pm_ops smc_drv_pm_ops = {
+ .resume = smc_drv_resume,
+ };
+
++#ifdef CONFIG_ACPI
++static const struct acpi_device_id smc91x_acpi_match[] = {
++ { "LNRO0003", },
++ { }
++};
++MODULE_DEVICE_TABLE(acpi, smc91x_acpi_match);
++#endif
++
+ static struct platform_driver smc_driver = {
+ .probe = smc_drv_probe,
+ .remove = smc_drv_remove,
+@@ -2416,6 +2425,7 @@ static struct platform_driver smc_driver = {
+ .owner = THIS_MODULE,
+ .pm = &smc_drv_pm_ops,
+ .of_match_table = of_match_ptr(smc91x_match),
++ .acpi_match_table = ACPI_PTR(smc91x_acpi_match),
+ },
+ };
+
+diff --git a/drivers/net/phy/amd-xgbe-phy.c b/drivers/net/phy/amd-xgbe-phy.c
+index f3230ee..90145d9 100644
+--- a/drivers/net/phy/amd-xgbe-phy.c
++++ b/drivers/net/phy/amd-xgbe-phy.c
+@@ -78,12 +78,14 @@
+
+ MODULE_AUTHOR("Tom Lendacky <thomas.lendacky@amd.com>");
+ MODULE_LICENSE("Dual BSD/GPL");
+-MODULE_VERSION("1.0.0-a");
++MODULE_VERSION("0.0.0-a");
+ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver");
+
+-#define XGBE_PHY_ID 0x000162d0
++#define XGBE_PHY_ID 0x7996ced0
+ #define XGBE_PHY_MASK 0xfffffff0
+
++#define XGBE_PHY_SERDES_RETRY 32
++#define XGBE_PHY_CHANNEL_PROPERTY "amd,serdes-channel"
+ #define XGBE_PHY_SPEEDSET_PROPERTY "amd,speed-set"
+
+ #define XGBE_AN_INT_CMPLT 0x01
+@@ -118,77 +120,6 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver");
+ #define MDIO_CTRL1_SPEED1G (MDIO_CTRL1_SPEED10G & ~BMCR_SPEED100)
+ #endif
+
+-/* SerDes integration register offsets */
+-#define SIR0_KR_RT_1 0x002c
+-#define SIR0_STATUS 0x0040
+-#define SIR1_SPEED 0x0000
+-
+-/* SerDes integration register entry bit positions and sizes */
+-#define SIR0_KR_RT_1_RESET_INDEX 11
+-#define SIR0_KR_RT_1_RESET_WIDTH 1
+-#define SIR0_STATUS_RX_READY_INDEX 0
+-#define SIR0_STATUS_RX_READY_WIDTH 1
+-#define SIR0_STATUS_TX_READY_INDEX 8
+-#define SIR0_STATUS_TX_READY_WIDTH 1
+-#define SIR1_SPEED_DATARATE_INDEX 4
+-#define SIR1_SPEED_DATARATE_WIDTH 2
+-#define SIR1_SPEED_PI_SPD_SEL_INDEX 12
+-#define SIR1_SPEED_PI_SPD_SEL_WIDTH 4
+-#define SIR1_SPEED_PLLSEL_INDEX 3
+-#define SIR1_SPEED_PLLSEL_WIDTH 1
+-#define SIR1_SPEED_RATECHANGE_INDEX 6
+-#define SIR1_SPEED_RATECHANGE_WIDTH 1
+-#define SIR1_SPEED_TXAMP_INDEX 8
+-#define SIR1_SPEED_TXAMP_WIDTH 4
+-#define SIR1_SPEED_WORDMODE_INDEX 0
+-#define SIR1_SPEED_WORDMODE_WIDTH 3
+-
+-#define SPEED_10000_CDR 0x7
+-#define SPEED_10000_PLL 0x1
+-#define SPEED_10000_RATE 0x0
+-#define SPEED_10000_TXAMP 0xa
+-#define SPEED_10000_WORD 0x7
+-
+-#define SPEED_2500_CDR 0x2
+-#define SPEED_2500_PLL 0x0
+-#define SPEED_2500_RATE 0x1
+-#define SPEED_2500_TXAMP 0xf
+-#define SPEED_2500_WORD 0x1
+-
+-#define SPEED_1000_CDR 0x2
+-#define SPEED_1000_PLL 0x0
+-#define SPEED_1000_RATE 0x3
+-#define SPEED_1000_TXAMP 0xf
+-#define SPEED_1000_WORD 0x1
+-
+-
+-/* SerDes RxTx register offsets */
+-#define RXTX_REG20 0x0050
+-#define RXTX_REG114 0x01c8
+-
+-/* SerDes RxTx register entry bit positions and sizes */
+-#define RXTX_REG20_BLWC_ENA_INDEX 2
+-#define RXTX_REG20_BLWC_ENA_WIDTH 1
+-#define RXTX_REG114_PQ_REG_INDEX 9
+-#define RXTX_REG114_PQ_REG_WIDTH 7
+-
+-#define RXTX_10000_BLWC 0
+-#define RXTX_10000_PQ 0x1e
+-
+-#define RXTX_2500_BLWC 1
+-#define RXTX_2500_PQ 0xa
+-
+-#define RXTX_1000_BLWC 1
+-#define RXTX_1000_PQ 0xa
+-
+-/* Bit setting and getting macros
+- * The get macro will extract the current bit field value from within
+- * the variable
+- *
+- * The set macro will clear the current bit field value within the
+- * variable and then set the bit field of the variable to the
+- * specified value
+- */
+ #define GET_BITS(_var, _index, _width) \
+ (((_var) >> (_index)) & ((0x1 << (_width)) - 1))
+
+@@ -198,71 +129,12 @@ do { \
+ (_var) |= (((_val) & ((0x1 << (_width)) - 1)) << (_index)); \
+ } while (0)
+
+-#define XSIR_GET_BITS(_var, _prefix, _field) \
+- GET_BITS((_var), \
+- _prefix##_##_field##_INDEX, \
+- _prefix##_##_field##_WIDTH)
+-
+-#define XSIR_SET_BITS(_var, _prefix, _field, _val) \
+- SET_BITS((_var), \
+- _prefix##_##_field##_INDEX, \
+- _prefix##_##_field##_WIDTH, (_val))
++#define XCMU_IOREAD(_priv, _reg) \
++ ioread16((_priv)->cmu_regs + _reg)
+
+-/* Macros for reading or writing SerDes integration registers
+- * The ioread macros will get bit fields or full values using the
+- * register definitions formed using the input names
+- *
+- * The iowrite macros will set bit fields or full values using the
+- * register definitions formed using the input names
+- */
+-#define XSIR0_IOREAD(_priv, _reg) \
+- ioread16((_priv)->sir0_regs + _reg)
++#define XCMU_IOWRITE(_priv, _reg, _val) \
++ iowrite16((_val), (_priv)->cmu_regs + _reg)
+
+-#define XSIR0_IOREAD_BITS(_priv, _reg, _field) \
+- GET_BITS(XSIR0_IOREAD((_priv), _reg), \
+- _reg##_##_field##_INDEX, \
+- _reg##_##_field##_WIDTH)
+-
+-#define XSIR0_IOWRITE(_priv, _reg, _val) \
+- iowrite16((_val), (_priv)->sir0_regs + _reg)
+-
+-#define XSIR0_IOWRITE_BITS(_priv, _reg, _field, _val) \
+-do { \
+- u16 reg_val = XSIR0_IOREAD((_priv), _reg); \
+- SET_BITS(reg_val, \
+- _reg##_##_field##_INDEX, \
+- _reg##_##_field##_WIDTH, (_val)); \
+- XSIR0_IOWRITE((_priv), _reg, reg_val); \
+-} while (0)
+-
+-#define XSIR1_IOREAD(_priv, _reg) \
+- ioread16((_priv)->sir1_regs + _reg)
+-
+-#define XSIR1_IOREAD_BITS(_priv, _reg, _field) \
+- GET_BITS(XSIR1_IOREAD((_priv), _reg), \
+- _reg##_##_field##_INDEX, \
+- _reg##_##_field##_WIDTH)
+-
+-#define XSIR1_IOWRITE(_priv, _reg, _val) \
+- iowrite16((_val), (_priv)->sir1_regs + _reg)
+-
+-#define XSIR1_IOWRITE_BITS(_priv, _reg, _field, _val) \
+-do { \
+- u16 reg_val = XSIR1_IOREAD((_priv), _reg); \
+- SET_BITS(reg_val, \
+- _reg##_##_field##_INDEX, \
+- _reg##_##_field##_WIDTH, (_val)); \
+- XSIR1_IOWRITE((_priv), _reg, reg_val); \
+-} while (0)
+-
+-
+-/* Macros for reading or writing SerDes RxTx registers
+- * The ioread macros will get bit fields or full values using the
+- * register definitions formed using the input names
+- *
+- * The iowrite macros will set bit fields or full values using the
+- * register definitions formed using the input names
+- */
+ #define XRXTX_IOREAD(_priv, _reg) \
+ ioread16((_priv)->rxtx_regs + _reg)
+
+@@ -283,6 +155,77 @@ do { \
+ XRXTX_IOWRITE((_priv), _reg, reg_val); \
+ } while (0)
+
++/* SerDes CMU register offsets */
++#define CMU_REG15 0x003c
++#define CMU_REG16 0x0040
++
++/* SerDes CMU register entry bit positions and sizes */
++#define CMU_REG16_TX_RATE_CHANGE_BASE 15
++#define CMU_REG16_RX_RATE_CHANGE_BASE 14
++#define CMU_REG16_RATE_CHANGE_DECR 2
++
++
++/* SerDes RxTx register offsets */
++#define RXTX_REG2 0x0008
++#define RXTX_REG3 0x000c
++#define RXTX_REG5 0x0014
++#define RXTX_REG6 0x0018
++#define RXTX_REG20 0x0050
++#define RXTX_REG53 0x00d4
++#define RXTX_REG114 0x01c8
++#define RXTX_REG115 0x01cc
++#define RXTX_REG142 0x0238
++
++/* SerDes RxTx register entry bit positions and sizes */
++#define RXTX_REG2_RESETB_INDEX 15
++#define RXTX_REG2_RESETB_WIDTH 1
++#define RXTX_REG3_TX_DATA_RATE_INDEX 14
++#define RXTX_REG3_TX_DATA_RATE_WIDTH 2
++#define RXTX_REG3_TX_WORD_MODE_INDEX 11
++#define RXTX_REG3_TX_WORD_MODE_WIDTH 3
++#define RXTX_REG5_TXAMP_CNTL_INDEX 7
++#define RXTX_REG5_TXAMP_CNTL_WIDTH 4
++#define RXTX_REG6_RX_DATA_RATE_INDEX 9
++#define RXTX_REG6_RX_DATA_RATE_WIDTH 2
++#define RXTX_REG6_RX_WORD_MODE_INDEX 11
++#define RXTX_REG6_RX_WORD_MODE_WIDTH 3
++#define RXTX_REG20_BLWC_ENA_INDEX 2
++#define RXTX_REG20_BLWC_ENA_WIDTH 1
++#define RXTX_REG53_RX_PLLSELECT_INDEX 15
++#define RXTX_REG53_RX_PLLSELECT_WIDTH 1
++#define RXTX_REG53_TX_PLLSELECT_INDEX 14
++#define RXTX_REG53_TX_PLLSELECT_WIDTH 1
++#define RXTX_REG53_PI_SPD_SEL_CDR_INDEX 10
++#define RXTX_REG53_PI_SPD_SEL_CDR_WIDTH 4
++#define RXTX_REG114_PQ_REG_INDEX 9
++#define RXTX_REG114_PQ_REG_WIDTH 7
++#define RXTX_REG115_FORCE_LAT_CAL_START_INDEX 2
++#define RXTX_REG115_FORCE_LAT_CAL_START_WIDTH 1
++#define RXTX_REG115_FORCE_SUM_CAL_START_INDEX 1
++#define RXTX_REG115_FORCE_SUM_CAL_START_WIDTH 1
++#define RXTX_REG142_SUM_CALIB_DONE_INDEX 15
++#define RXTX_REG142_SUM_CALIB_DONE_WIDTH 1
++#define RXTX_REG142_SUM_CALIB_ERR_INDEX 14
++#define RXTX_REG142_SUM_CALIB_ERR_WIDTH 1
++#define RXTX_REG142_LAT_CALIB_DONE_INDEX 11
++#define RXTX_REG142_LAT_CALIB_DONE_WIDTH 1
++
++#define RXTX_FULL_RATE 0x0
++#define RXTX_HALF_RATE 0x1
++#define RXTX_FIFTH_RATE 0x3
++#define RXTX_66BIT_WORD 0x7
++#define RXTX_10BIT_WORD 0x1
++#define RXTX_10G_TX_AMP 0xa
++#define RXTX_1G_TX_AMP 0xf
++#define RXTX_10G_CDR 0x7
++#define RXTX_1G_CDR 0x2
++#define RXTX_10G_PLL 0x1
++#define RXTX_1G_PLL 0x0
++#define RXTX_10G_PQ 0x1e
++#define RXTX_1G_PQ 0xa
++
++
++DEFINE_SPINLOCK(cmu_lock);
+
+ enum amd_xgbe_phy_an {
+ AMD_XGBE_AN_READY = 0,
+@@ -321,18 +264,18 @@ struct amd_xgbe_phy_priv {
+
+ /* SerDes related mmio resources */
+ struct resource *rxtx_res;
+- struct resource *sir0_res;
+- struct resource *sir1_res;
++ struct resource *cmu_res;
+
+ /* SerDes related mmio registers */
+ void __iomem *rxtx_regs; /* SerDes Rx/Tx CSRs */
+- void __iomem *sir0_regs; /* SerDes integration registers (1/2) */
+- void __iomem *sir1_regs; /* SerDes integration registers (2/2) */
++ void __iomem *cmu_regs; /* SerDes CMU CSRs */
++
++ unsigned int serdes_channel;
++ unsigned int speed_set;
+
+ /* Maintain link status for re-starting auto-negotiation */
+ unsigned int link;
+ enum amd_xgbe_phy_mode mode;
+- unsigned int speed_set;
+
+ /* Auto-negotiation state machine support */
+ struct mutex an_mutex;
+@@ -394,33 +337,51 @@ static int amd_xgbe_phy_pcs_power_cycle(struct phy_device *phydev)
+ static void amd_xgbe_phy_serdes_start_ratechange(struct phy_device *phydev)
+ {
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
++ u16 val, mask;
++
++ /* Assert Rx and Tx ratechange in CMU_reg16 */
++ val = XCMU_IOREAD(priv, CMU_REG16);
+
+- /* Assert Rx and Tx ratechange */
+- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, RATECHANGE, 1);
++ mask = (1 << (CMU_REG16_TX_RATE_CHANGE_BASE -
++ (priv->serdes_channel * CMU_REG16_RATE_CHANGE_DECR))) |
++ (1 << (CMU_REG16_RX_RATE_CHANGE_BASE -
++ (priv->serdes_channel * CMU_REG16_RATE_CHANGE_DECR)));
++ val |= mask;
++
++ XCMU_IOWRITE(priv, CMU_REG16, val);
+ }
+
+ static void amd_xgbe_phy_serdes_complete_ratechange(struct phy_device *phydev)
+ {
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
++ u16 val, mask;
+ unsigned int wait;
+- u16 status;
+
+- /* Release Rx and Tx ratechange */
+- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, RATECHANGE, 0);
++ /* Release Rx and Tx ratechange for proper channel in CMU_reg16 */
++ val = XCMU_IOREAD(priv, CMU_REG16);
++
++ mask = (1 << (CMU_REG16_TX_RATE_CHANGE_BASE -
++ (priv->serdes_channel * CMU_REG16_RATE_CHANGE_DECR))) |
++ (1 << (CMU_REG16_RX_RATE_CHANGE_BASE -
++ (priv->serdes_channel * CMU_REG16_RATE_CHANGE_DECR)));
++ val &= ~mask;
+
+- /* Wait for Rx and Tx ready */
++ XCMU_IOWRITE(priv, CMU_REG16, val);
++
++ /* Wait for Rx and Tx ready in CMU_reg15 */
++ mask = (1 << priv->serdes_channel) |
++ (1 << (priv->serdes_channel + 8));
+ wait = XGBE_PHY_RATECHANGE_COUNT;
+ while (wait--) {
+- usleep_range(50, 75);
++ udelay(50);
+
+- status = XSIR0_IOREAD(priv, SIR0_STATUS);
+- if (XSIR_GET_BITS(status, SIR0_STATUS, RX_READY) &&
+- XSIR_GET_BITS(status, SIR0_STATUS, TX_READY))
++ val = XCMU_IOREAD(priv, CMU_REG15);
++ if ((val & mask) == mask)
+ return;
+ }
+
+ netdev_dbg(phydev->attached_dev, "SerDes rx/tx not ready (%#hx)\n",
+- status);
++ val);
+ }
+
+ static int amd_xgbe_phy_xgmii_mode(struct phy_device *phydev)
+@@ -428,8 +389,8 @@ static int amd_xgbe_phy_xgmii_mode(struct phy_device *phydev)
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
+ int ret;
+
+- /* Enable KR training */
+- ret = amd_xgbe_an_enable_kr_training(phydev);
++ /* Disable KR training */
++ ret = amd_xgbe_an_disable_kr_training(phydev);
+ if (ret < 0)
+ return ret;
+
+@@ -455,19 +416,30 @@ static int amd_xgbe_phy_xgmii_mode(struct phy_device *phydev)
+ return ret;
+
+ /* Set SerDes to 10G speed */
++ spin_lock(&cmu_lock);
++
+ amd_xgbe_phy_serdes_start_ratechange(phydev);
+
+- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_10000_RATE);
+- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_10000_WORD);
+- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP, SPEED_10000_TXAMP);
+- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_10000_PLL);
+- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PI_SPD_SEL, SPEED_10000_CDR);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG3, TX_DATA_RATE, RXTX_FULL_RATE);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG3, TX_WORD_MODE, RXTX_66BIT_WORD);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG5, TXAMP_CNTL, RXTX_10G_TX_AMP);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG6, RX_DATA_RATE, RXTX_FULL_RATE);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG6, RX_WORD_MODE, RXTX_66BIT_WORD);
+
+- XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, RXTX_10000_BLWC);
+- XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, RXTX_10000_PQ);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, 0);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG53, RX_PLLSELECT, RXTX_10G_PLL);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG53, TX_PLLSELECT, RXTX_10G_PLL);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG53, PI_SPD_SEL_CDR, RXTX_10G_CDR);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, RXTX_10G_PQ);
+
+ amd_xgbe_phy_serdes_complete_ratechange(phydev);
+
++ spin_unlock(&cmu_lock);
++
+ priv->mode = AMD_XGBE_MODE_KR;
+
+ return 0;
+@@ -505,19 +477,30 @@ static int amd_xgbe_phy_gmii_2500_mode(struct phy_device *phydev)
+ return ret;
+
+ /* Set SerDes to 2.5G speed */
++ spin_lock(&cmu_lock);
++
+ amd_xgbe_phy_serdes_start_ratechange(phydev);
+
+- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_2500_RATE);
+- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_2500_WORD);
+- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP, SPEED_2500_TXAMP);
+- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_2500_PLL);
+- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PI_SPD_SEL, SPEED_2500_CDR);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG3, TX_DATA_RATE, RXTX_HALF_RATE);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG3, TX_WORD_MODE, RXTX_10BIT_WORD);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG5, TXAMP_CNTL, RXTX_1G_TX_AMP);
+
+- XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, RXTX_2500_BLWC);
+- XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, RXTX_2500_PQ);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG6, RX_DATA_RATE, RXTX_HALF_RATE);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG6, RX_WORD_MODE, RXTX_10BIT_WORD);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, 1);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG53, RX_PLLSELECT, RXTX_1G_PLL);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG53, TX_PLLSELECT, RXTX_1G_PLL);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG53, PI_SPD_SEL_CDR, RXTX_1G_CDR);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, RXTX_1G_PQ);
+
+ amd_xgbe_phy_serdes_complete_ratechange(phydev);
+
++ spin_unlock(&cmu_lock);
++
+ priv->mode = AMD_XGBE_MODE_KX;
+
+ return 0;
+@@ -555,19 +538,30 @@ static int amd_xgbe_phy_gmii_mode(struct phy_device *phydev)
+ return ret;
+
+ /* Set SerDes to 1G speed */
++ spin_lock(&cmu_lock);
++
+ amd_xgbe_phy_serdes_start_ratechange(phydev);
+
+- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_1000_RATE);
+- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_1000_WORD);
+- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP, SPEED_1000_TXAMP);
+- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_1000_PLL);
+- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PI_SPD_SEL, SPEED_1000_CDR);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG3, TX_DATA_RATE, RXTX_FIFTH_RATE);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG3, TX_WORD_MODE, RXTX_10BIT_WORD);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG5, TXAMP_CNTL, RXTX_1G_TX_AMP);
+
+- XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, RXTX_1000_BLWC);
+- XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, RXTX_1000_PQ);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG6, RX_DATA_RATE, RXTX_FIFTH_RATE);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG6, RX_WORD_MODE, RXTX_10BIT_WORD);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, 1);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG53, RX_PLLSELECT, RXTX_1G_PLL);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG53, TX_PLLSELECT, RXTX_1G_PLL);
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG53, PI_SPD_SEL_CDR, RXTX_1G_CDR);
++
++ XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, RXTX_1G_PQ);
+
+ amd_xgbe_phy_serdes_complete_ratechange(phydev);
+
++ spin_unlock(&cmu_lock);
++
+ priv->mode = AMD_XGBE_MODE_KX;
+
+ return 0;
+@@ -639,13 +633,9 @@ static enum amd_xgbe_phy_an amd_xgbe_an_tx_training(struct phy_device *phydev,
+ if (ret < 0)
+ return AMD_XGBE_AN_ERROR;
+
+- XSIR0_IOWRITE_BITS(priv, SIR0_KR_RT_1, RESET, 1);
+-
+ ret |= 0x01;
+ phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, ret);
+
+- XSIR0_IOWRITE_BITS(priv, SIR0_KR_RT_1, RESET, 0);
+-
+ return AMD_XGBE_AN_EVENT;
+ }
+
+@@ -1291,21 +1281,33 @@ static int amd_xgbe_phy_probe(struct phy_device *phydev)
+ goto err_priv;
+ }
+
+- priv->sir0_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+- priv->sir0_regs = devm_ioremap_resource(dev, priv->sir0_res);
+- if (IS_ERR(priv->sir0_regs)) {
+- dev_err(dev, "sir0 ioremap failed\n");
+- ret = PTR_ERR(priv->sir0_regs);
++ /* All xgbe phy devices share the CMU registers so retrieve
++ * the resource and do the ioremap directly rather than
++ * the devm_ioremap_resource call
++ */
++ priv->cmu_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ if (!priv->cmu_res) {
++ dev_err(dev, "cmu invalid resource\n");
++ ret = -EINVAL;
++ goto err_rxtx;
++ }
++ priv->cmu_regs = devm_ioremap_nocache(dev, priv->cmu_res->start,
++ resource_size(priv->cmu_res));
++ if (!priv->cmu_regs) {
++ dev_err(dev, "cmu ioremap failed\n");
++ ret = -ENOMEM;
+ goto err_rxtx;
+ }
+
+- priv->sir1_res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+- priv->sir1_regs = devm_ioremap_resource(dev, priv->sir1_res);
+- if (IS_ERR(priv->sir1_regs)) {
+- dev_err(dev, "sir1 ioremap failed\n");
+- ret = PTR_ERR(priv->sir1_regs);
+- goto err_sir0;
++ /* Get the device serdes channel property */
++ property = of_get_property(dev->of_node, XGBE_PHY_CHANNEL_PROPERTY,
++ NULL);
++ if (!property) {
++ dev_err(dev, "unable to obtain serdes_channel property\n");
++ ret = -EINVAL;
++ goto err_cmu;
+ }
++ priv->serdes_channel = be32_to_cpu(*property);
+
+ /* Get the device speed set property */
+ speed_set = 0;
+@@ -1324,14 +1326,14 @@ static int amd_xgbe_phy_probe(struct phy_device *phydev)
+ default:
+ dev_err(dev, "invalid amd,speed-set property\n");
+ ret = -EINVAL;
+- goto err_sir1;
++ goto err_cmu;
+ }
+
+ priv->link = 1;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2);
+ if (ret < 0)
+- goto err_sir1;
++ goto err_cmu;
+ if ((ret & MDIO_PCS_CTRL2_TYPE) == MDIO_PCS_CTRL2_10GBR)
+ priv->mode = AMD_XGBE_MODE_KR;
+ else
+@@ -1342,7 +1344,7 @@ static int amd_xgbe_phy_probe(struct phy_device *phydev)
+ priv->an_workqueue = create_singlethread_workqueue(wq_name);
+ if (!priv->an_workqueue) {
+ ret = -ENOMEM;
+- goto err_sir1;
++ goto err_cmu;
+ }
+
+ phydev->priv = priv;
+@@ -1352,15 +1354,8 @@ static int amd_xgbe_phy_probe(struct phy_device *phydev)
+
+ return 0;
+
+-err_sir1:
+- devm_iounmap(dev, priv->sir1_regs);
+- devm_release_mem_region(dev, priv->sir1_res->start,
+- resource_size(priv->sir1_res));
+-
+-err_sir0:
+- devm_iounmap(dev, priv->sir0_regs);
+- devm_release_mem_region(dev, priv->sir0_res->start,
+- resource_size(priv->sir0_res));
++err_cmu:
++ devm_iounmap(dev, priv->cmu_regs);
+
+ err_rxtx:
+ devm_iounmap(dev, priv->rxtx_regs);
+@@ -1392,14 +1387,7 @@ static void amd_xgbe_phy_remove(struct phy_device *phydev)
+ flush_workqueue(priv->an_workqueue);
+ destroy_workqueue(priv->an_workqueue);
+
+- /* Release resources */
+- devm_iounmap(dev, priv->sir1_regs);
+- devm_release_mem_region(dev, priv->sir1_res->start,
+- resource_size(priv->sir1_res));
+-
+- devm_iounmap(dev, priv->sir0_regs);
+- devm_release_mem_region(dev, priv->sir0_res->start,
+- resource_size(priv->sir0_res));
++ devm_iounmap(dev, priv->cmu_regs);
+
+ devm_iounmap(dev, priv->rxtx_regs);
+ devm_release_mem_region(dev, priv->rxtx_res->start,
diff --git a/drivers/of/address.c b/drivers/of/address.c
index e371825..afdb782 100644
--- a/drivers/of/address.c
@@ -3879,10 +5825,10 @@ index 0fb0fdb..946935d 100644
case IORESOURCE_IO:
diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c
new file mode 100644
-index 0000000..dae61a6
+index 0000000..41c76b8
--- /dev/null
+++ b/drivers/pci/host/pci-xgene.c
-@@ -0,0 +1,646 @@
+@@ -0,0 +1,659 @@
+/**
+ * APM X-Gene PCIe Driver
+ *
@@ -3930,6 +5876,7 @@ index 0000000..dae61a6
+#define CFGBARH 0x158
+#define CFGCTL 0x15c
+#define RTDID 0x160
++#define BRIDGE_CFG_0 0x2000
+#define BRIDGE_CFG_4 0x2010
+#define BRIDGE_STATUS_0 0x2600
+
@@ -4013,8 +5960,7 @@ index 0000000..dae61a6
+ *val = readl(addr + offset);
+}
+
-+static inline void
-+xgene_pcie_cfg_in16(void __iomem *addr, int offset, u32 *val)
++static inline void xgene_pcie_cfg_in16(void __iomem *addr, int offset, u32 *val)
+{
+ *val = readl(addr + (offset & ~0x3));
+
@@ -4027,8 +5973,7 @@ index 0000000..dae61a6
+ *val &= 0xFFFF;
+}
+
-+static inline void
-+xgene_pcie_cfg_in8(void __iomem *addr, int offset, u32 *val)
++static inline void xgene_pcie_cfg_in8(void __iomem *addr, int offset, u32 *val)
+{
+ *val = readl(addr + (offset & ~0x3));
+
@@ -4046,7 +5991,8 @@ index 0000000..dae61a6
+ *val &= 0xFF;
+}
+
-+/* When the address bit [17:16] is 2'b01, the Configuration access will be
++/*
++ * When the address bit [17:16] is 2'b01, the Configuration access will be
+ * treated as Type 1 and it will be forwarded to external PCIe device.
+ */
+static void __iomem *xgene_pcie_get_cfg_base(struct pci_bus *bus)
@@ -4059,7 +6005,8 @@ index 0000000..dae61a6
+ return port->cfg_base;
+}
+
-+/* For Configuration request, RTDID register is used as Bus Number,
++/*
++ * For Configuration request, RTDID register is used as Bus Number,
+ * Device Number and Function number of the header fields.
+ */
+static void xgene_pcie_set_rtdid_reg(struct pci_bus *bus, uint devfn)
@@ -4080,6 +6027,23 @@ index 0000000..dae61a6
+ readl(port->csr_base + RTDID);
+}
+
++/*
++ * X-Gene PCIe port uses BAR0-BAR1 of RC's configuration space as
++ * the translation between PCI bus to native BUS. Entire DDR region
++ * is mapped on to PCIe space using these registers, so that it is
++ * accessible for EP devices for DMA. The BAR0/1 of bridge should be
++ * hidden during enumeration to avoid the sizing and resource allocation
++ * by PCIe core.
++ */
++static bool xgene_pcie_hide_rc_bars(struct pci_bus *bus, int offset)
++{
++ if (pci_is_root_bus(bus) && ((offset == PCI_BASE_ADDRESS_0) ||
++ (offset == PCI_BASE_ADDRESS_1)))
++ return true;
++
++ return false;
++}
++
+static int xgene_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
@@ -4089,6 +6053,11 @@ index 0000000..dae61a6
+ if ((pci_is_root_bus(bus) && devfn != 0) || !port->link_up)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
++ if (xgene_pcie_hide_rc_bars(bus, offset)) {
++ *val = 0;
++ return PCIBIOS_SUCCESSFUL;
++ }
++
+ xgene_pcie_set_rtdid_reg(bus, devfn);
+ addr = xgene_pcie_get_cfg_base(bus);
+ switch (len) {
@@ -4102,6 +6071,7 @@ index 0000000..dae61a6
+ xgene_pcie_cfg_in32(addr, offset, val);
+ break;
+ }
++
+ return PCIBIOS_SUCCESSFUL;
+}
+
@@ -4114,6 +6084,9 @@ index 0000000..dae61a6
+ if ((pci_is_root_bus(bus) && devfn != 0) || !port->link_up)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
++ if (xgene_pcie_hide_rc_bars(bus, offset))
++ return PCIBIOS_SUCCESSFUL;
++
+ xgene_pcie_set_rtdid_reg(bus, devfn);
+ addr = xgene_pcie_get_cfg_base(bus);
+ switch (len) {
@@ -4197,23 +6170,6 @@ index 0000000..dae61a6
+ return 0;
+}
+
-+static void xgene_pcie_fixup_bridge(struct pci_dev *dev)
-+{
-+ int i;
-+
-+ /* Hide the PCI host BARs from the kernel as their content doesn't
-+ * fit well in the resource management
-+ */
-+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-+ dev->resource[i].start = dev->resource[i].end = 0;
-+ dev->resource[i].flags = 0;
-+ }
-+ dev_info(&dev->dev, "Hiding X-Gene pci host bridge resources %s\n",
-+ pci_name(dev));
-+}
-+DECLARE_PCI_FIXUP_HEADER(XGENE_PCIE_VENDORID, XGENE_PCIE_DEVICEID,
-+ xgene_pcie_fixup_bridge);
-+
+static int xgene_pcie_map_reg(struct xgene_pcie_port *port,
+ struct platform_device *pdev)
+{
@@ -4284,8 +6240,7 @@ index 0000000..dae61a6
+ struct resource *res = window->res;
+ u64 restype = resource_type(res);
+
-+ dev_dbg(port->dev, "0x%08lx 0x%016llx...0x%016llx\n",
-+ res->flags, res->start, res->end);
++ dev_dbg(port->dev, "%pR\n", res);
+
+ switch (restype) {
+ case IORESOURCE_IO:
@@ -4302,7 +6257,7 @@ index 0000000..dae61a6
+ case IORESOURCE_BUS:
+ break;
+ default:
-+ dev_err(dev, "invalid io resource!");
++ dev_err(dev, "invalid io resource - %pR\n", res);
+ return -EINVAL;
+ }
+ }
@@ -4450,11 +6405,15 @@ index 0000000..dae61a6
+ struct list_head *res,
+ resource_size_t io_base)
+{
-+ u32 lanes = 0, speed = 0;
++ u32 val, lanes = 0, speed = 0;
+ int ret;
+
+ xgene_pcie_clear_config(port);
+
++ /* setup the vendor and device IDs correctly */
++ val = (XGENE_PCIE_DEVICEID << 16) | XGENE_PCIE_VENDORID;
++ writel(val, port->csr_base + BRIDGE_CFG_0);
++
+ ret = xgene_pcie_map_ranges(port, res, io_base);
+ if (ret)
+ return ret;
@@ -5204,6 +7163,43 @@ index 57d9df8..e075437 100644
{ },
};
MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
+diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
+index c600ccf..10c4775 100644
+--- a/drivers/virtio/virtio_mmio.c
++++ b/drivers/virtio/virtio_mmio.c
+@@ -100,8 +100,7 @@
+ #include <linux/virtio_config.h>
+ #include <linux/virtio_mmio.h>
+ #include <linux/virtio_ring.h>
+-
+-
++#include <linux/acpi.h>
+
+ /* The alignment to use between consumer and producer parts of vring.
+ * Currently hardcoded to the page size. */
+@@ -637,6 +636,14 @@ static struct of_device_id virtio_mmio_match[] = {
+ };
+ MODULE_DEVICE_TABLE(of, virtio_mmio_match);
+
++#ifdef CONFIG_ACPI
++static const struct acpi_device_id virtio_mmio_acpi_match[] = {
++ { "LNRO0005", },
++ { }
++};
++MODULE_DEVICE_TABLE(acpi, virtio_mmio_acpi_match);
++#endif
++
+ static struct platform_driver virtio_mmio_driver = {
+ .probe = virtio_mmio_probe,
+ .remove = virtio_mmio_remove,
+@@ -644,6 +651,7 @@ static struct platform_driver virtio_mmio_driver = {
+ .name = "virtio-mmio",
+ .owner = THIS_MODULE,
+ .of_match_table = virtio_mmio_match,
++ .acpi_match_table = ACPI_PTR(virtio_mmio_acpi_match),
+ },
+ };
+
diff --git a/include/acpi/acnames.h b/include/acpi/acnames.h
index c728113..f97804b 100644
--- a/include/acpi/acnames.h
@@ -5220,7 +7216,7 @@ index c728113..f97804b 100644
#define METHOD_NAME__SB_ "_SB_"
#define METHOD_NAME__SEG "_SEG"
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
-index d91e59b..68d5ade 100644
+index 57ee052..a483e61 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -68,6 +68,8 @@ bool acpi_check_dsm(acpi_handle handle, const u8 *uuid, int rev, u64 funcs);