Add RPi3 GPIO expander, RPi fixes, OMAP serial update, general ARM fixes

1 files changed, 118 insertions, 0 deletions

diff --git a/bcm283x-Fix-probing-of-bcm2835-i2s.patch b/bcm283x-Fix-probing-of-bcm2835-i2s.patch
new file mode 100644
index 000000000..911b2d982
--- /dev/null
+++ b/bcm283x-Fix-probing-of-bcm2835-i2s.patch
@@ -0,0 +1,118 @@
+From patchwork Fri Feb 16 10:55:33 2018
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [V3, 1/2,
+ RESEND] dt-bindings: bcm283x: Fix register ranges of bcm2835-i2s
+From: Stefan Wahren <stefan.wahren@i2se.com>
+X-Patchwork-Id: 10224429
+Message-Id: <1518778534-3328-2-git-send-email-stefan.wahren@i2se.com>
+To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
+ Eric Anholt <eric@anholt.net>
+Cc: Stefan Wahren <stefan.wahren@i2se.com>, devicetree@vger.kernel.org,
+ alsa-devel@alsa-project.org, Liam Girdwood <lgirdwood@gmail.com>,
+ Mark Brown <broonie@kernel.org>, linux-rpi-kernel@lists.infradead.org,
+ linux-arm-kernel@lists.infradead.org
+Date: Fri, 16 Feb 2018 11:55:33 +0100
+
+Since 517e7a1537a ("ASoC: bcm2835: move to use the clock framework")
+the bcm2835-i2s requires a clock as DT property. Unfortunately
+the necessary DT change has never been applied. While we are at it
+also fix the first PCM register range to cover the PCM_GRAY register.
+
+This patch only fixes the affected dt-bindings.
+
+Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
+Reviewed-by: Eric Anholt <eric@anholt.net>
+Reviewed-by: Rob Herring <robh@kernel.org>
+---
+ Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt   | 4 ++--
+ Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt | 9 ++++-----
+ 2 files changed, 6 insertions(+), 7 deletions(-)
+
+diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt
+index baf9b34..b6a8cc0 100644
+--- a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt
++++ b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt
+@@ -74,8 +74,8 @@ Example:
+ 
+ bcm2835_i2s: i2s@7e203000 {
+ 	compatible = "brcm,bcm2835-i2s";
+-	reg = <	0x7e203000 0x20>,
+-	      < 0x7e101098 0x02>;
++	reg = <	0x7e203000 0x24>;
++	clocks = <&clocks BCM2835_CLOCK_PCM>;
+ 
+ 	dmas = <&dma 2>,
+ 	       <&dma 3>;
+diff --git a/Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt b/Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt
+index 65783de..7bb0362 100644
+--- a/Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt
++++ b/Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt
+@@ -2,9 +2,8 @@
+ 
+ Required properties:
+ - compatible: "brcm,bcm2835-i2s"
+-- reg: A list of base address and size entries:
+-	* The first entry should cover the PCM registers
+-	* The second entry should cover the PCM clock registers
++- reg: Should contain PCM registers location and length.
++- clocks: the (PCM) clock to use
+ - dmas: List of DMA controller phandle and DMA request line ordered pairs.
+ - dma-names: Identifier string for each DMA request line in the dmas property.
+   These strings correspond 1:1 with the ordered pairs in dmas.
+@@ -16,8 +15,8 @@ Example:
+ 
+ bcm2835_i2s: i2s@7e203000 {
+ 	compatible = "brcm,bcm2835-i2s";
+-	reg = <0x7e203000 0x20>,
+-	      <0x7e101098 0x02>;
++	reg = <0x7e203000 0x24>;
++	clocks = <&clocks BCM2835_CLOCK_PCM>;
+ 
+ 	dmas = <&dma 2>,
+ 	       <&dma 3>;
+From patchwork Fri Feb 16 10:55:34 2018
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [V3,2/2,RESEND] ARM: dts: bcm283x: Fix probing of bcm2835-i2s
+From: Stefan Wahren <stefan.wahren@i2se.com>
+X-Patchwork-Id: 10224427
+Message-Id: <1518778534-3328-3-git-send-email-stefan.wahren@i2se.com>
+To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
+ Eric Anholt <eric@anholt.net>
+Cc: Stefan Wahren <stefan.wahren@i2se.com>, devicetree@vger.kernel.org,
+ alsa-devel@alsa-project.org, Liam Girdwood <lgirdwood@gmail.com>,
+ Mark Brown <broonie@kernel.org>, linux-rpi-kernel@lists.infradead.org,
+ linux-arm-kernel@lists.infradead.org
+Date: Fri, 16 Feb 2018 11:55:34 +0100
+
+Since 517e7a1537a ("ASoC: bcm2835: move to use the clock framework")
+the bcm2835-i2s requires a clock as DT property. Unfortunately
+the necessary DT change has never been applied. While we are at it
+also fix the first PCM register range to cover the PCM_GRAY register.
+
+Fixes: 517e7a1537a ("ASoC: bcm2835: move to use the clock framework")
+Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
+Reviewed-by: Eric Anholt <eric@anholt.net>
+Tested-by: Matthias Reichl <hias@horus.com>
+---
+ arch/arm/boot/dts/bcm283x.dtsi | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
+index 013431e..e08203c 100644
+--- a/arch/arm/boot/dts/bcm283x.dtsi
++++ b/arch/arm/boot/dts/bcm283x.dtsi
+@@ -396,8 +396,8 @@
+ 
+ 		i2s: i2s@7e203000 {
+ 			compatible = "brcm,bcm2835-i2s";
+-			reg = <0x7e203000 0x20>,
+-			      <0x7e101098 0x02>;
++			reg = <0x7e203000 0x24>;
++			clocks = <&clocks BCM2835_CLOCK_PCM>;
+ 
+ 			dmas = <&dma 2>,
+ 			       <&dma 3>;