Sync up stabilization with f29

1 files changed, 172 insertions, 0 deletions

diff --git a/arm-sdhci-esdhc-imx-fixes.patch b/arm-sdhci-esdhc-imx-fixes.patch
new file mode 100644
index 000000000..c42f9e195
--- /dev/null
+++ b/arm-sdhci-esdhc-imx-fixes.patch
@@ -0,0 +1,172 @@
+From patchwork Thu Jun 28 07:31:36 2018
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: mmc: sdhci-esdhc-imx: support eMMC DDR mode when running at 3.3V
+From: Stefan Agner <stefan@agner.ch>
+X-Patchwork-Id: 10493185
+Message-Id: <20180628073136.21748-1-stefan@agner.ch>
+To: adrian.hunter@intel.com, ulf.hansson@linaro.org
+Cc: fabio.estevam@nxp.com, haibo.chen@nxp.com, aisheng.dong@nxp.com,
+ michael@amarulasolutions.com, linux-mmc@vger.kernel.org,
+ linux-kernel@vger.kernel.org, Stefan Agner <stefan@agner.ch>
+Date: Thu, 28 Jun 2018 09:31:36 +0200
+
+The uSDHC supports DDR modes for eMMC devices running at 3.3V. This
+allows to run eMMC with 3.3V signaling voltage at DDR52 mode:
+
+  # cat /sys/kernel/debug/mmc1/ios
+  clock:          52000000 Hz
+  vdd:            21 (3.3 ~ 3.4 V)
+  bus mode:       2 (push-pull)
+  chip select:    0 (don't care)
+  power mode:     2 (on)
+  bus width:      3 (8 bits)
+  timing spec:    8 (mmc DDR52)
+  signal voltage: 0 (3.30 V)
+  driver type:    0 (driver type B)
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ drivers/mmc/host/sdhci-esdhc-imx.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
+index b716b933f00a..6f444731754d 100644
+--- a/drivers/mmc/host/sdhci-esdhc-imx.c
++++ b/drivers/mmc/host/sdhci-esdhc-imx.c
+@@ -1324,7 +1324,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
+ 
+ 	if (esdhc_is_usdhc(imx_data)) {
+ 		host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
+-		host->mmc->caps |= MMC_CAP_1_8V_DDR;
++		host->mmc->caps |= MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR;
+ 		if (!(imx_data->socdata->flags & ESDHC_FLAG_HS200))
+ 			host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
+ 
+From patchwork Thu Jun 28 08:13:29 2018
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [1/3] mmc: sdhci-esdhc-imx: get rid of support_vsel
+From: Stefan Agner <stefan@agner.ch>
+X-Patchwork-Id: 10493269
+Message-Id: <20180628081331.13051-2-stefan@agner.ch>
+To: adrian.hunter@intel.com, ulf.hansson@linaro.org
+Cc: fabio.estevam@nxp.com, haibo.chen@nxp.com, aisheng.dong@nxp.com,
+ michael@amarulasolutions.com, rmk+kernel@armlinux.org.uk,
+ linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
+ Stefan Agner <stefan@agner.ch>
+Date: Thu, 28 Jun 2018 10:13:29 +0200
+
+The field support_vsel is currently only used in the device tree
+case. Get rid of it. No change in behavior.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ drivers/mmc/host/sdhci-esdhc-imx.c          | 8 ++------
+ include/linux/platform_data/mmc-esdhc-imx.h | 2 --
+ 2 files changed, 2 insertions(+), 8 deletions(-)
+
+diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
+index 6f444731754d..20a420b765b3 100644
+--- a/drivers/mmc/host/sdhci-esdhc-imx.c
++++ b/drivers/mmc/host/sdhci-esdhc-imx.c
+@@ -1145,18 +1145,14 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
+ 			     &boarddata->tuning_start_tap);
+ 
+ 	if (of_find_property(np, "no-1-8-v", NULL))
+-		boarddata->support_vsel = false;
+-	else
+-		boarddata->support_vsel = true;
++		host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
+ 
+ 	if (of_property_read_u32(np, "fsl,delay-line", &boarddata->delay_line))
+ 		boarddata->delay_line = 0;
+ 
+ 	mmc_of_parse_voltage(np, &host->ocr_mask);
+ 
+-	/* sdr50 and sdr104 need work on 1.8v signal voltage */
+-	if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) &&
+-	    !IS_ERR(imx_data->pins_default)) {
++	if (esdhc_is_usdhc(imx_data) && !IS_ERR(imx_data->pins_default)) {
+ 		imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl,
+ 						ESDHC_PINCTRL_STATE_100MHZ);
+ 		imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl,
+diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h
+index 7daa78a2f342..640dec8b5b0c 100644
+--- a/include/linux/platform_data/mmc-esdhc-imx.h
++++ b/include/linux/platform_data/mmc-esdhc-imx.h
+@@ -34,7 +34,6 @@ enum cd_types {
+  * @cd_gpio:	gpio for card_detect interrupt
+  * @wp_type:	type of write_protect method (see wp_types enum above)
+  * @cd_type:	type of card_detect method (see cd_types enum above)
+- * @support_vsel:  indicate it supports 1.8v switching
+  */
+ 
+ struct esdhc_platform_data {
+@@ -43,7 +42,6 @@ struct esdhc_platform_data {
+ 	enum wp_types wp_type;
+ 	enum cd_types cd_type;
+ 	int max_bus_width;
+-	bool support_vsel;
+ 	unsigned int delay_line;
+ 	unsigned int tuning_step;       /* The delay cell steps in tuning procedure */
+ 	unsigned int tuning_start_tap;	/* The start delay cell point in tuning procedure */
+From patchwork Thu Jun 28 08:13:30 2018
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [2/3] mmc: sdhci: add quirk to prevent higher speed modes
+From: Stefan Agner <stefan@agner.ch>
+X-Patchwork-Id: 10493273
+Message-Id: <20180628081331.13051-3-stefan@agner.ch>
+To: adrian.hunter@intel.com, ulf.hansson@linaro.org
+Cc: fabio.estevam@nxp.com, haibo.chen@nxp.com, aisheng.dong@nxp.com,
+ michael@amarulasolutions.com, rmk+kernel@armlinux.org.uk,
+ linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
+ Stefan Agner <stefan@agner.ch>
+Date: Thu, 28 Jun 2018 10:13:30 +0200
+
+Some hosts are capable of running higher speed modes but do not
+have the board support for it. Introduce a quirk which prevents
+the stack from using modes running at 100MHz or faster.
+
+Signed-off-by: Stefan Agner <stefan@agner.ch>
+---
+ drivers/mmc/host/sdhci.c | 8 ++++++++
+ drivers/mmc/host/sdhci.h | 2 ++
+ 2 files changed, 10 insertions(+)
+
+diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
+index 1c828e0e9905..8ac257dfaab3 100644
+--- a/drivers/mmc/host/sdhci.c
++++ b/drivers/mmc/host/sdhci.c
+@@ -3749,6 +3749,14 @@ int sdhci_setup_host(struct sdhci_host *host)
+ 		}
+ 	}
+ 
++	if (host->quirks2 & SDHCI_QUIRK2_NO_UHS_HS200_HS400) {
++		host->caps1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
++				 SDHCI_SUPPORT_DDR50);
++
++		mmc->caps2 &= ~(MMC_CAP2_HSX00_1_8V | MMC_CAP2_HSX00_1_2V |
++				MMC_CAP2_HS400_ES);
++	}
++
+ 	if (host->quirks2 & SDHCI_QUIRK2_NO_1_8_V) {
+ 		host->caps1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
+ 				 SDHCI_SUPPORT_DDR50);
+diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
+index 23966f887da6..cb2433d6d61f 100644
+--- a/drivers/mmc/host/sdhci.h
++++ b/drivers/mmc/host/sdhci.h
+@@ -450,6 +450,8 @@ struct sdhci_host {
+  * obtainable timeout.
+  */
+ #define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT			(1<<17)
++/* Do not support any higher speeds (>50MHz) */
++#define SDHCI_QUIRK2_NO_UHS_HS200_HS400			(1<<18)
+ 
+ 	int irq;		/* Device IRQ */
+ 	void __iomem *ioaddr;	/* Mapped address */