Don't build Exynos4 on lpae kernel, Add dts for BananaPi, Minor ARM updates, Build 6lowpan modules

1 files changed, 209 insertions, 0 deletions

diff --git a/arm-dts-sun7i-bananapi.patch b/arm-dts-sun7i-bananapi.patch
new file mode 100644
index 000000000..4fff64b2d
--- /dev/null
+++ b/arm-dts-sun7i-bananapi.patch
@@ -0,0 +1,209 @@
+The Banana Pi is an A20 based development board using Raspberry Pi compatible
+IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi
+and stereo audio out + various expenansion headers:
+
+
+Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
+---
+ arch/arm/boot/dts/Makefile               |   1 +
+ arch/arm/boot/dts/sun7i-a20-bananapi.dts | 177 +++++++++++++++++++++++++++++++
+ 2 files changed, 184 insertions(+)
+ create mode 100644 arch/arm/boot/dts/sun7i-a20-bananapi.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index bdbc84a..440e037 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -379,6 +379,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
+ 	sun6i-a31-hummingbird.dtb \
+ 	sun6i-a31-m9.dtb
+ dtb-$(CONFIG_MACH_SUN7I) += \
++	sun7i-a20-bananapi.dtb \
+ 	sun7i-a20-cubieboard2.dtb \
+ 	sun7i-a20-cubietruck.dtb \
+ 	sun7i-a20-i12-tvbox.dtb \
+diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+new file mode 100644
+index 0000000..0332b82
+--- /dev/null
++++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+@@ -0,0 +1,177 @@
++/*
++ * Copyright 2014 Hans de Goede <hdegoede@xxxxxxxxxx>
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/dts-v1/;
++/include/ "sun7i-a20.dtsi"
++/include/ "sunxi-common-regulators.dtsi"
++
++/ {
++	model = "LeMaker Banana Pi";
++	compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
++
++	soc@01c00000 {
++		mmc0: mmc@01c0f000 {
++			pinctrl-names = "default";
++			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
++			vmmc-supply = <&reg_vcc3v3>;
++			bus-width = <4>;
++			cd-gpios = <&pio 7 10 0>; /* PH10 */
++			cd-inverted;
++			status = "okay";
++		};
++
++		usbphy: phy@01c13400 {
++			usb1_vbus-supply = <&reg_usb1_vbus>;
++			usb2_vbus-supply = <&reg_usb2_vbus>;
++			status = "okay";
++		};
++
++		ehci0: usb@01c14000 {
++			status = "okay";
++		};
++
++		ohci0: usb@01c14400 {
++			status = "okay";
++		};
++
++		ahci: sata@01c18000 {
++			status = "okay";
++		};
++
++		ehci1: usb@01c1c000 {
++			status = "okay";
++		};
++
++		ohci1: usb@01c1c400 {
++			status = "okay";
++		};
++
++		pinctrl@01c20800 {
++			uart3_pins_bananapi: uart3_pin@0 {
++				allwinner,pins = "PH0", "PH1";
++				allwinner,function = "uart3";
++				allwinner,drive = <0>;
++				allwinner,pull = <0>;
++			};
++
++			mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
++				allwinner,pins = "PH10";
++				allwinner,function = "gpio_in";
++				allwinner,drive = <0>;
++				allwinner,pull = <1>;
++			};
++
++			gmac_power_pin_bananapi: gmac_power_pin@0 {
++				allwinner,pins = "PH23";
++				allwinner,function = "gpio_out";
++				allwinner,drive = <0>;
++				allwinner,pull = <0>;
++			};
++
++			led_pins_bananapi: led_pins@0 {
++				allwinner,pins = "PH24";
++				allwinner,function = "gpio_out";
++				allwinner,drive = <0>;
++				allwinner,pull = <0>;
++			};
++		};
++
++		ir0: ir@01c21800 {
++			pinctrl-names = "default";
++			pinctrl-0 = <&ir0_pins_a>;
++			status = "okay";
++		};
++
++		uart0: serial@01c28000 {
++			pinctrl-names = "default";
++			pinctrl-0 = <&uart0_pins_a>;
++			status = "okay";
++		};
++
++		uart3: serial@01c28c00 {
++			pinctrl-names = "default";
++			pinctrl-0 = <&uart3_pins_bananapi>;
++			status = "okay";
++		};
++
++		uart7: serial@01c29c00 {
++			pinctrl-names = "default";
++			pinctrl-0 = <&uart7_pins_a>;
++			status = "okay";
++		};
++
++		i2c0: i2c@01c2ac00 {
++			pinctrl-names = "default";
++			pinctrl-0 = <&i2c0_pins_a>;
++			status = "okay";
++
++			axp209: pmic@34 {
++				compatible = "x-powers,axp209";
++				reg = <0x34>;
++				interrupt-parent = <&nmi_intc>;
++				interrupts = <0 8>;
++
++				interrupt-controller;
++				#interrupt-cells = <1>;
++			};
++		};
++
++		i2c2: i2c@01c2b400 {
++			pinctrl-names = "default";
++			pinctrl-0 = <&i2c2_pins_a>;
++			status = "okay";
++		};
++
++		gmac: ethernet@01c50000 {
++			pinctrl-names = "default";
++			pinctrl-0 = <&gmac_pins_rgmii_a>;
++			phy = <&phy1>;
++			phy-mode = "rgmii";
++			phy-supply = <&reg_gmac_3v3>;
++			status = "okay";
++
++			phy1: ethernet-phy@1 {
++				reg = <1>;
++			};
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++		pinctrl-names = "default";
++		pinctrl-0 = <&led_pins_bananapi>;
++
++		green {
++			label = "bananapi:green:usr";
++			gpios = <&pio 7 24 0>;
++		};
++	};
++
++	reg_usb1_vbus: usb1-vbus {
++		status = "okay";
++	};
++
++	reg_usb2_vbus: usb2-vbus {
++		status = "okay";
++	};
++
++	reg_gmac_3v3: gmac-3v3 {
++		compatible = "regulator-fixed";
++		pinctrl-names = "default";
++		pinctrl-0 = <&gmac_power_pin_bananapi>;
++		regulator-name = "gmac-3v3";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		startup-delay-us = <50000>;
++		enable-active-high;
++		gpio = <&pio 7 23 0>;
++	};
++};
+-- 
+2.0.0