Patch file cleanup

Do a couple things here:

- Split the mega-patches into individual patches.  Should help with rebasing.
- Make all patches 'git am' acceptable.

There should be no functional or actual code differences from before

1 files changed, 180 insertions, 0 deletions

diff --git a/arm-dts-am335x-bone-common-setup-default-pinmux-http.patch b/arm-dts-am335x-bone-common-setup-default-pinmux-http.patch
new file mode 100644
index 000000000..095618331
--- /dev/null
+++ b/arm-dts-am335x-bone-common-setup-default-pinmux-http.patch
@@ -0,0 +1,180 @@
+From 4546ddeebfc63fcb8ea157d6d730be0e4f122344 Mon Sep 17 00:00:00 2001
+From: Robert Nelson <robertcnelson@gmail.com>
+Date: Tue, 31 Dec 2013 14:18:00 -0600
+Subject: [PATCH] arm: dts: am335x-bone-common: setup default pinmux
+ http://elinux.org/Basic_Proto_Cape
+
+Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
+---
+ arch/arm/boot/dts/am335x-bone-common.dtsi | 130 ++++++++++++++++++++++++++++++
+ 1 file changed, 130 insertions(+)
+
+diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
+index c7357bcc7d5c..86cdb52dbf8a 100644
+--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
++++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
+@@ -98,6 +98,13 @@
+ 		>;
+ 	};
+ 
++	uart1_pins: pinmux_uart1_pins {
++		pinctrl-single,pins = <
++			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
++			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
++		>;
++	};
++
+ 	clkout2_pin: pinmux_clkout2_pin {
+ 		pinctrl-single,pins = <
+ 			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+@@ -178,6 +185,33 @@
+ 			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ 		>;
+ 	};
++
++	spi0_pins: pinmux_spi0_pins {
++		pinctrl-single,pins = <
++			0x150 (PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_sclk.spi0_sclk */
++			0x154 (PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_d0.spi0_d0 */
++			0x158 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* spi0_d1.spi0_d1 */
++			0x15c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* spi0_cs0.spi0_cs0 */
++		>;
++	};
++
++	ehrpwm1_pin_p9_14: pinmux_ehrpwm1_pin_p9_14 {
++		pinctrl-single,pins = <
++			0x048 0x6	/* P9_14 (ZCZ ball U14) | MODE 6 */
++		>;
++	};
++
++	ehrpwm1_pin_p9_16: pinmux_ehrpwm1_pin_p9_16 {
++		pinctrl-single,pins = <
++			0x04c 0x6	/* P9_16 (ZCZ ball T14) | MODE 6 */
++		>;
++	};
++
++	ecap0_pin_p9_42: pinmux_ecap0_pin_p9_42 {
++		pinctrl-single,pins = <
++			0x164 0x0	/* P9_42 (ZCZ ball C18) | MODE 0 */
++		>;
++	};
+ };
+ 
+ &uart0 {
+@@ -187,6 +221,13 @@
+ 	status = "okay";
+ };
+ 
++&uart1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart1_pins>;
++
++	status = "okay";
++};
++
+ &usb {
+ 	status = "okay";
+ };
+@@ -261,6 +302,56 @@
+ 	};
+ };
+ 
++&epwmss0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&ecap0_pin_p9_42>;
++	status = "okay";
++
++	ecap@48300100 {
++		status = "okay";
++	};
++};
++
++&epwmss1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <
++		&ehrpwm1_pin_p9_14
++		&ehrpwm1_pin_p9_16
++	>;
++
++	status = "okay";
++
++	ehrpwm@48302200 {
++		status = "okay";
++	};
++};
++
++&spi0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi0_pins>;
++	status = "okay";
++
++	spidev0: spi@0 {
++		compatible = "spidev";
++		reg = <0>;
++		spi-max-frequency = <16000000>;
++		spi-cpha;
++	};
++
++	spidev1: spi@1 {
++		compatible = "spidev";
++		reg = <1>;
++		spi-max-frequency = <16000000>;
++	};
++};
++
++&tscadc {
++	status = "okay";
++	adc {
++		ti,adc-channels = <4 5 6>;
++	};
++};
++
+ /include/ "tps65217.dtsi"
+ 
+ &tps {
+@@ -337,3 +428,42 @@
+ 	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ 	cd-inverted;
+ };
++
++/ {
++	ocp {
++		//FIXME: these pwm's still need work, this guild isn't working..
++		//http://elinux.org/EBC_Exercise_13_Pulse_Width_Modulation
++		pwm_test_P9_14@0 {
++			compatible = "pwm_test";
++			pwms = <&ehrpwm1 0 500000 1>;
++			pwm-names = "PWM_P9_14";
++			pinctrl-names = "default";
++			pinctrl-0 = <&ehrpwm1_pin_p9_14>;
++			enabled = <1>;
++			duty = <0>;
++			status = "okay";
++		};
++
++		pwm_test_P9_16@0 {
++			compatible = "pwm_test";
++			pwms = <&ehrpwm1 0 500000 1>;
++			pwm-names = "PWM_P9_16";
++			pinctrl-names = "default";
++			pinctrl-0 = <&ehrpwm1_pin_p9_16>;
++			enabled = <1>;
++			duty = <0>;
++			status = "okay";
++		};
++
++		pwm_test_P9_42 {
++			compatible = "pwm_test";
++			pwms = <&ecap0 0 500000 1>;
++			pwm-names = "PWM_P9_42";
++			pinctrl-names = "default";
++			pinctrl-0 = <&ecap0_pin_p9_42>;
++			enabled = <1>;
++			duty = <0>;
++			status = "okay";
++		};
++	};
++};
+-- 
+1.9.3
+