actually add the full PocketBeagle DT

1 files changed, 381 insertions, 4 deletions

diff --git a/arm-dts-Add-am335x-pocketbeagle.patch b/arm-dts-Add-am335x-pocketbeagle.patch
index 8ef8a6aae..55c422065 100644
--- a/arm-dts-Add-am335x-pocketbeagle.patch
+++ b/arm-dts-Add-am335x-pocketbeagle.patch
@@ -1,6 +1,6 @@
-From e5cc3a49292980a8e0eb464ca6d0d6cbff243e35 Mon Sep 17 00:00:00 2001
+From bb86b4b0bbae12341df16fedf51aeda480364fbf Mon Sep 17 00:00:00 2001
 From: Peter Robinson <pbrobinson@gmail.com>
-Date: Thu, 19 Apr 2018 17:06:28 +0100
+Date: Thu, 19 Apr 2018 19:35:58 +0100
 Subject: [PATCH] ARM: dts: Add am335x-pocketbeagle
 
 PocketBeagle is an ultra-tiny-yet-complete open-source USB-key-fob computer.
@@ -27,8 +27,12 @@ Changes in v2:
 - Fix: leds remove '_' to fix node_name_chars_strict warning
 - Fix: node_name_chars_strict pinmux_*_pins label's.
 ---
- arch/arm/boot/dts/Makefile | 1 +
- 1 file changed, 1 insertion(+)
+ arch/arm/boot/dts/Makefile                   |   1 +
+ arch/arm/boot/dts/am335x-osd335x-common.dtsi | 124 ++++++++++
+ arch/arm/boot/dts/am335x-pocketbeagle.dts    | 237 +++++++++++++++++++
+ 3 files changed, 362 insertions(+)
+ create mode 100644 arch/arm/boot/dts/am335x-osd335x-common.dtsi
+ create mode 100644 arch/arm/boot/dts/am335x-pocketbeagle.dts
 
 diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
 index ade7a38543dc..a632bbef01f5 100644
@@ -42,6 +46,379 @@ index ade7a38543dc..a632bbef01f5 100644
  	am335x-shc.dtb \
  	am335x-sbc-t335.dtb \
  	am335x-sl50.dtb \
+diff --git a/arch/arm/boot/dts/am335x-osd335x-common.dtsi b/arch/arm/boot/dts/am335x-osd335x-common.dtsi
+new file mode 100644
+index 000000000000..f8ff473f94f0
+--- /dev/null
++++ b/arch/arm/boot/dts/am335x-osd335x-common.dtsi
+@@ -0,0 +1,124 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
++ *
++ * Author: Robert Nelson <robertcnelson@gmail.com>
++ */
++
++/ {
++	cpus {
++		cpu@0 {
++			cpu0-supply = <&dcdc2_reg>;
++		};
++	};
++
++	memory@80000000 {
++		device_type = "memory";
++		reg = <0x80000000 0x20000000>; /* 512 MB */
++	};
++};
++
++&cpu0_opp_table {
++	/*
++	* Octavo Systems:
++	* The EFUSE_SMA register is not programmed for any of the AM335x wafers
++	* we get and we are not programming them during our production test.
++	* Therefore, from a DEVICE_ID revision point of view, the silicon looks
++	* like it is Revision 2.1.  However, from an EFUSE_SMA point of view for
++	* the HW OPP table, the silicon looks like it is Revision 1.0 (ie the
++	* EFUSE_SMA register reads as all zeros).
++	*/
++	oppnitro-1000000000 {
++		opp-supported-hw = <0x06 0x0100>;
++	};
++};
++
++&am33xx_pinmux {
++	i2c0_pins: pinmux-i2c0-pins {
++		pinctrl-single,pins = <
++			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* (C17) I2C0_SDA.I2C0_SDA */
++			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* (C16) I2C0_SCL.I2C0_SCL */
++		>;
++	};
++};
++
++&i2c0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&i2c0_pins>;
++
++	status = "okay";
++	clock-frequency = <400000>;
++
++	tps: tps@24 {
++		reg = <0x24>;
++	};
++};
++
++/include/ "tps65217.dtsi"
++
++&tps {
++	interrupts = <7>; /* NMI */
++	interrupt-parent = <&intc>;
++
++	ti,pmic-shutdown-controller;
++
++	pwrbutton {
++		interrupts = <2>;
++		status = "okay";
++	};
++
++	regulators {
++		dcdc1_reg: regulator@0 {
++			regulator-name = "vdds_dpr";
++			regulator-always-on;
++		};
++
++		dcdc2_reg: regulator@1 {
++			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
++			regulator-name = "vdd_mpu";
++			regulator-min-microvolt = <925000>;
++			regulator-max-microvolt = <1351500>;
++			regulator-boot-on;
++			regulator-always-on;
++		};
++
++		dcdc3_reg: regulator@2 {
++			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
++			regulator-name = "vdd_core";
++			regulator-min-microvolt = <925000>;
++			regulator-max-microvolt = <1150000>;
++			regulator-boot-on;
++			regulator-always-on;
++		};
++
++		ldo1_reg: regulator@3 {
++			regulator-name = "vio,vrtc,vdds";
++			regulator-always-on;
++		};
++
++		ldo2_reg: regulator@4 {
++			regulator-name = "vdd_3v3aux";
++			regulator-always-on;
++		};
++
++		ldo3_reg: regulator@5 {
++			regulator-name = "vdd_1v8";
++			regulator-min-microvolt = <1800000>;
++			regulator-max-microvolt = <1800000>;
++			regulator-always-on;
++		};
++
++		ldo4_reg: regulator@6 {
++			regulator-name = "vdd_3v3a";
++			regulator-always-on;
++		};
++	};
++};
++
++&aes {
++	status = "okay";
++};
++
++&sham {
++	status = "okay";
++};
+diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts
+new file mode 100644
+index 000000000000..62fe5cab9fae
+--- /dev/null
++++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts
+@@ -0,0 +1,237 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
++ *
++ * Author: Robert Nelson <robertcnelson@gmail.com>
++ */
++/dts-v1/;
++
++#include "am33xx.dtsi"
++#include "am335x-osd335x-common.dtsi"
++
++/ {
++	model = "TI AM335x PocketBeagle";
++	compatible = "ti,am335x-pocketbeagle", "ti,am335x-bone", "ti,am33xx";
++
++	chosen {
++		stdout-path = &uart0;
++	};
++
++	leds {
++		pinctrl-names = "default";
++		pinctrl-0 = <&usr_leds_pins>;
++
++		compatible = "gpio-leds";
++
++		usr0 {
++			label = "beaglebone:green:usr0";
++			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "heartbeat";
++			default-state = "off";
++		};
++
++		usr1 {
++			label = "beaglebone:green:usr1";
++			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "mmc0";
++			default-state = "off";
++		};
++
++		usr2 {
++			label = "beaglebone:green:usr2";
++			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "cpu0";
++			default-state = "off";
++		};
++
++		usr3 {
++			label = "beaglebone:green:usr3";
++			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
++			default-state = "off";
++		};
++	};
++
++	vmmcsd_fixed: fixedregulator0 {
++		compatible = "regulator-fixed";
++		regulator-name = "vmmcsd_fixed";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++	};
++};
++
++&am33xx_pinmux {
++	i2c2_pins: pinmux-i2c2-pins {
++		pinctrl-single,pins = <
++			AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3)	/* (D17) uart1_rtsn.I2C2_SCL */
++			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3)	/* (D18) uart1_ctsn.I2C2_SDA */
++		>;
++	};
++
++	ehrpwm0_pins: pinmux-ehrpwm0-pins {
++		pinctrl-single,pins = <
++			AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* (A13) mcasp0_aclkx.ehrpwm0A */
++		>;
++	};
++
++	ehrpwm1_pins: pinmux-ehrpwm1-pins {
++		pinctrl-single,pins = <
++			AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE6)	/* (U14) gpmc_a2.ehrpwm1A */
++		>;
++	};
++
++	mmc0_pins: pinmux-mmc0-pins {
++		pinctrl-single,pins = <
++			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)		/* (C15) spi0_cs1.gpio0[6] */
++			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* (G16) mmc0_dat0.mmc0_dat0 */
++			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* (G15) mmc0_dat1.mmc0_dat1 */
++			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* (F18) mmc0_dat2.mmc0_dat2 */
++			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* (F17) mmc0_dat3.mmc0_dat3 */
++			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* (G18) mmc0_cmd.mmc0_cmd */
++			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* (G17) mmc0_clk.mmc0_clk */
++			AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4)		/* (B12) mcasp0_aclkr.mmc0_sdwp */
++		>;
++	};
++
++	spi0_pins: pinmux-spi0-pins {
++		pinctrl-single,pins = <
++			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0)	/* (A17) spi0_sclk.spi0_sclk */
++			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0)	/* (B17) spi0_d0.spi0_d0 */
++			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)	/* (B16) spi0_d1.spi0_d1 */
++			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0)	/* (A16) spi0_cs0.spi0_cs0 */
++		>;
++	};
++
++	spi1_pins: pinmux-spi1-pins {
++		pinctrl-single,pins = <
++			AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4)	/* (C18) eCAP0_in_PWM0_out.spi1_sclk */
++			AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4)	/* (E18) uart0_ctsn.spi1_d0 */
++			AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4)	/* (E17) uart0_rtsn.spi1_d1 */
++			AM33XX_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE4)	/* (A15) xdma_event_intr0.spi1_cs1 */
++		>;
++	};
++
++	usr_leds_pins: pinmux-usr-leds-pins {
++		pinctrl-single,pins = <
++			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)		/* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
++			AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)		/* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
++			AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7)		/* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
++			AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7)		/* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
++		>;
++	};
++
++	uart0_pins: pinmux-uart0-pins {
++		pinctrl-single,pins = <
++			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* (E15) uart0_rxd.uart0_rxd */
++			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* (E16) uart0_txd.uart0_txd */
++		>;
++	};
++
++	uart4_pins: pinmux-uart4-pins {
++		pinctrl-single,pins = <
++			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)	/* (T17) gpmc_wait0.uart4_rxd */
++			AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6)	/* (U17) gpmc_wpn.uart4_txd */
++		>;
++	};
++};
++
++&epwmss0 {
++	status = "okay";
++};
++
++&ehrpwm0 {
++	status = "okay";
++	pinctrl-names = "default";
++	pinctrl-0 = <&ehrpwm0_pins>;
++};
++
++&epwmss1 {
++	status = "okay";
++};
++
++&ehrpwm1 {
++	status = "okay";
++	pinctrl-names = "default";
++	pinctrl-0 = <&ehrpwm1_pins>;
++};
++
++&i2c0 {
++	eeprom: eeprom@50 {
++		compatible = "atmel,24c256";
++		reg = <0x50>;
++	};
++};
++
++&i2c2 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&i2c2_pins>;
++
++	status = "okay";
++	clock-frequency = <400000>;
++};
++
++&mmc1 {
++	status = "okay";
++	vmmc-supply = <&vmmcsd_fixed>;
++	bus-width = <4>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc0_pins>;
++	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
++};
++
++&rtc {
++	system-power-controller;
++};
++
++&tscadc {
++	status = "okay";
++	adc {
++		ti,adc-channels = <0 1 2 3 4 5 6 7>;
++		ti,chan-step-avg = <16 16 16 16 16 16 16 16>;
++		ti,chan-step-opendelay = <0x98 0x98 0x98 0x98 0x98 0x98 0x98 0x98>;
++		ti,chan-step-sampledelay = <0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0>;
++	};
++};
++
++&uart0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart0_pins>;
++
++	status = "okay";
++};
++
++&uart4 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart4_pins>;
++
++	status = "okay";
++};
++
++&usb {
++	status = "okay";
++};
++
++&usb_ctrl_mod {
++	status = "okay";
++};
++
++&usb0_phy {
++	status = "okay";
++};
++
++&usb0 {
++	status = "okay";
++	dr_mode = "otg";
++};
++
++&usb1_phy {
++	status = "okay";
++};
++
++&usb1 {
++	status = "okay";
++	dr_mode = "host";
++};
++
++&cppi41dma  {
++	status = "okay";
++};
 -- 
 2.17.0