diff options
author | Jeremy Cline <jcline@redhat.com> | 2019-12-04 13:38:43 -0500 |
---|---|---|
committer | Jeremy Cline <jcline@redhat.com> | 2019-12-04 13:38:43 -0500 |
commit | 079e0f545a491903a6acb0dc783d162ae84a2e6c (patch) | |
tree | 7a030bec812ab5e3e50079ebf0015ce8504a5b3e /Revert-ARM-bcm283x-Switch-V3D-over-to-using-the-PM-driver-instead-of-firmware.patch | |
parent | c1e2dca7bf02f21854445669ab48f82dead65dfc (diff) | |
download | kernel-079e0f545a491903a6acb0dc783d162ae84a2e6c.tar.gz kernel-079e0f545a491903a6acb0dc783d162ae84a2e6c.tar.xz kernel-079e0f545a491903a6acb0dc783d162ae84a2e6c.zip |
Sync up stabilization with f31
Diffstat (limited to 'Revert-ARM-bcm283x-Switch-V3D-over-to-using-the-PM-driver-instead-of-firmware.patch')
-rw-r--r-- | Revert-ARM-bcm283x-Switch-V3D-over-to-using-the-PM-driver-instead-of-firmware.patch | 78 |
1 files changed, 78 insertions, 0 deletions
diff --git a/Revert-ARM-bcm283x-Switch-V3D-over-to-using-the-PM-driver-instead-of-firmware.patch b/Revert-ARM-bcm283x-Switch-V3D-over-to-using-the-PM-driver-instead-of-firmware.patch new file mode 100644 index 000000000..8627b6087 --- /dev/null +++ b/Revert-ARM-bcm283x-Switch-V3D-over-to-using-the-PM-driver-instead-of-firmware.patch @@ -0,0 +1,78 @@ +From 9d1a8ad3c56f4e84a0ec46246b4c08a6d139f638 Mon Sep 17 00:00:00 2001 +From: Peter Robinson <pbrobinson@gmail.com> +Date: Sun, 13 Oct 2019 14:33:23 +0100 +Subject: [PATCH] Revert "ARM: bcm283x: Switch V3D over to using the PM driver + instead of firmware." + +Since release of the new BCM2835 PM driver there has been several reports +of V3D probing issues. This is caused by timeouts during powering-up the +GRAFX PM domain: + + bcm2835-power: Timeout waiting for grafx power OK + +I was able to reproduce this reliable on my Raspberry Pi 3B+ after setting +force_turbo=1 in the firmware configuration. Since there are no issues +using the firmware PM driver with the same setup, there must be an issue +in the BCM2835 PM driver. + +Unfortunately there hasn't been much progress in identifying the root cause +since June (mostly in the lack of documentation), so i decided to switch +back until the issue in the BCM2835 PM driver is fixed. + +Link: https://github.com/raspberrypi/linux/issues/3046 +Fixes: e1dc2b2e1bef (" ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware.") +Cc: stable@vger.kernel.org +Signed-off-by: Stefan Wahren <wahrenst@gmx.net> +Acked-by: Eric Anholt <eric@anholt.net> +--- + a/arch/arm/boot/dts/bcm2835-rpi.dtsi | 4 ++++ + b/arch/arm/boot/dts/bcm283x.dtsi | 4 +--- + 2 files changed, 5 insertions(+), 3 deletions(-) + +diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi +index 715d50c64529..d136867c317f 100644 +--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi +@@ -90,6 +90,10 @@ + status = "okay"; + }; + ++&v3d { ++ power-domains = <&power RPI_POWER_DOMAIN_V3D>; ++}; ++ + &vec { + power-domains = <&power RPI_POWER_DOMAIN_VEC>; + status = "okay"; +diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi +index 4b21ddb26aa5..0c6a6611f285 100644 +--- a/arch/arm/boot/dts/bcm283x.dtsi ++++ b/arch/arm/boot/dts/bcm283x.dtsi +@@ -3,7 +3,6 @@ + #include <dt-bindings/clock/bcm2835-aux.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> +-#include <dt-bindings/soc/bcm2835-pm.h> + + /* firmware-provided startup stubs live here, where the secondary CPUs are + * spinning. +@@ -121,7 +120,7 @@ + #interrupt-cells = <2>; + }; + +- pm: watchdog@7e100000 { ++ watchdog@7e100000 { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; +@@ -641,7 +640,6 @@ + compatible = "brcm,bcm2835-v3d"; + reg = <0x7ec00000 0x1000>; + interrupts = <1 10>; +- power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; + }; + + vc4: gpu { +-- +2.21.0 + |