summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPeter Robinson <pbrobinson@gmail.com>2019-06-13 10:49:31 +0100
committerPeter Robinson <pbrobinson@gmail.com>2019-06-13 10:49:31 +0100
commit437fb97beced8bc1fe621a062370e2e3ea75ed0a (patch)
tree123e16e3bfbbba80e09868137b0071101104db0a
parent5faed67f4758b6ac2e49f4d62e3008f13e9f5979 (diff)
downloadkernel-437fb97beced8bc1fe621a062370e2e3ea75ed0a.tar.gz
kernel-437fb97beced8bc1fe621a062370e2e3ea75ed0a.tar.xz
kernel-437fb97beced8bc1fe621a062370e2e3ea75ed0a.zip
Raspberry Pi: move to cpufreq driver accepted for upstream \o/
-rw-r--r--ARM-cpufreq-support-for-Raspberry-Pi.patch706
-rw-r--r--bcm2835-cpufreq-add-CPU-frequency-control-driver.patch399
-rw-r--r--configs/fedora/generic/arm/CONFIG_ARM_RASPBERRYPI_CPUFREQ1
-rw-r--r--configs/fedora/generic/arm/CONFIG_CLK_RASPBERRYPI1
-rw-r--r--configs/fedora/generic/arm/CONFIG_CLK_RASPBERRYPI_CPU1
-rw-r--r--kernel-aarch64-debug.config3
-rw-r--r--kernel-aarch64.config3
-rw-r--r--kernel-armv7hl-debug.config3
-rw-r--r--kernel-armv7hl-lpae-debug.config3
-rw-r--r--kernel-armv7hl-lpae.config3
-rw-r--r--kernel-armv7hl.config3
-rw-r--r--kernel.spec5
12 files changed, 724 insertions, 407 deletions
diff --git a/ARM-cpufreq-support-for-Raspberry-Pi.patch b/ARM-cpufreq-support-for-Raspberry-Pi.patch
new file mode 100644
index 000000000..e259724ac
--- /dev/null
+++ b/ARM-cpufreq-support-for-Raspberry-Pi.patch
@@ -0,0 +1,706 @@
+From ba60a01e02086b0a242cf5ea3c59419108ada40b Mon Sep 17 00:00:00 2001
+From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+Date: Tue, 11 Jun 2019 19:58:34 +0200
+Subject: [PATCH 1/5] clk: bcm2835: remove pllb
+
+Raspberry Pi's firmware controls this pll, we should use the firmware
+interface to access it.
+
+Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+Acked-by: Eric Anholt <eric@anholt.net>
+---
+ drivers/clk/bcm/clk-bcm2835.c | 28 ++++------------------------
+ 1 file changed, 4 insertions(+), 24 deletions(-)
+
+diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
+index 770bb01f523e..867ae3c20041 100644
+--- a/drivers/clk/bcm/clk-bcm2835.c
++++ b/drivers/clk/bcm/clk-bcm2835.c
+@@ -1651,30 +1651,10 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
+ .fixed_divider = 1,
+ .flags = CLK_SET_RATE_PARENT),
+
+- /* PLLB is used for the ARM's clock. */
+- [BCM2835_PLLB] = REGISTER_PLL(
+- .name = "pllb",
+- .cm_ctrl_reg = CM_PLLB,
+- .a2w_ctrl_reg = A2W_PLLB_CTRL,
+- .frac_reg = A2W_PLLB_FRAC,
+- .ana_reg_base = A2W_PLLB_ANA0,
+- .reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE,
+- .lock_mask = CM_LOCK_FLOCKB,
+-
+- .ana = &bcm2835_ana_default,
+-
+- .min_rate = 600000000u,
+- .max_rate = 3000000000u,
+- .max_fb_rate = BCM2835_MAX_FB_RATE),
+- [BCM2835_PLLB_ARM] = REGISTER_PLL_DIV(
+- .name = "pllb_arm",
+- .source_pll = "pllb",
+- .cm_reg = CM_PLLB,
+- .a2w_reg = A2W_PLLB_ARM,
+- .load_mask = CM_PLLB_LOADARM,
+- .hold_mask = CM_PLLB_HOLDARM,
+- .fixed_divider = 1,
+- .flags = CLK_SET_RATE_PARENT),
++ /*
++ * PLLB is used for the ARM's clock. Controlled by firmware, see
++ * clk-raspberrypi.c.
++ */
+
+ /*
+ * PLLC is the core PLL, used to drive the core VPU clock.
+--
+2.21.0
+
+From 64482a97a0a2f14ebdbfe80a8eb0e063d293807b Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Wed, 12 Jun 2019 17:23:12 +0100
+Subject: [PATCH 2/5] clk: bcm283x: add driver interfacing with Raspberry Pi's
+ firmware
+
+Raspberry Pi's firmware offers an interface though which update it's
+clock's frequencies. This is specially useful in order to change the CPU
+clock (pllb_arm) which is 'owned' by the firmware and we're unable to
+scale using the register interface provided by clk-bcm2835.
+
+Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+Acked-by: Eric Anholt <eric@anholt.net>
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ drivers/clk/bcm/Kconfig | 7 +
+ drivers/clk/bcm/Makefile | 1 +
+ drivers/clk/bcm/clk-raspberrypi.c | 300 ++++++++++++++++++++++++++++++
+ 3 files changed, 308 insertions(+)
+ create mode 100644 drivers/clk/bcm/clk-raspberrypi.c
+
+diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
+index 29ee7b776cd4..a4a2775d65e1 100644
+--- a/drivers/clk/bcm/Kconfig
++++ b/drivers/clk/bcm/Kconfig
+@@ -64,3 +64,10 @@ config CLK_BCM_SR
+ default ARCH_BCM_IPROC
+ help
+ Enable common clock framework support for the Broadcom Stingray SoC
++
++config CLK_RASPBERRYPI
++ tristate "Raspberry Pi firmware based clock support"
++ depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE)
++ help
++ Enable common clock framework support for Raspberry Pi's firmware
++ dependent clocks
+diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
+index 002661d39128..eb7159099d82 100644
+--- a/drivers/clk/bcm/Makefile
++++ b/drivers/clk/bcm/Makefile
+@@ -7,6 +7,7 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o
+ obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
+ obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
+ obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835-aux.o
++obj-$(CONFIG_CLK_RASPBERRYPI) += clk-raspberrypi.o
+ obj-$(CONFIG_ARCH_BCM_53573) += clk-bcm53573-ilp.o
+ obj-$(CONFIG_CLK_BCM_CYGNUS) += clk-cygnus.o
+ obj-$(CONFIG_CLK_BCM_HR2) += clk-hr2.o
+diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
+new file mode 100644
+index 000000000000..467933767106
+--- /dev/null
++++ b/drivers/clk/bcm/clk-raspberrypi.c
+@@ -0,0 +1,300 @@
++// SPDX-License-Identifier: GPL-2.0+
++/*
++ * Raspberry Pi driver for firmware controlled clocks
++ *
++ * Even though clk-bcm2835 provides an interface to the hardware registers for
++ * the system clocks we've had to factor out 'pllb' as the firmware 'owns' it.
++ * We're not allowed to change it directly as we might race with the
++ * over-temperature and under-voltage protections provided by the firmware.
++ *
++ * Copyright (C) 2019 Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
++ */
++
++#include <linux/clkdev.h>
++#include <linux/clk-provider.h>
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <soc/bcm2835/raspberrypi-firmware.h>
++
++#define RPI_FIRMWARE_ARM_CLK_ID 0x000000003
++
++#define RPI_FIRMWARE_STATE_ENABLE_BIT BIT(0)
++#define RPI_FIRMWARE_STATE_WAIT_BIT BIT(1)
++
++/*
++ * Even though the firmware interface alters 'pllb' the frequencies are
++ * provided as per 'pllb_arm'. We need to scale before passing them trough.
++ */
++#define RPI_FIRMWARE_PLLB_ARM_DIV_RATE 2
++
++#define A2W_PLL_FRAC_BITS 20
++
++struct raspberrypi_clk {
++ struct device *dev;
++ struct rpi_firmware *firmware;
++
++ unsigned long min_rate;
++ unsigned long max_rate;
++
++ struct clk_hw pllb;
++ struct clk_hw *pllb_arm;
++ struct clk_lookup *pllb_arm_lookup;
++};
++
++/*
++ * Structure of the message passed to Raspberry Pi's firmware in order to
++ * change clock rates. The 'disable_turbo' option is only available to the ARM
++ * clock (pllb) which we enable by default as turbo mode will alter multiple
++ * clocks at once.
++ *
++ * Even though we're able to access the clock registers directly we're bound to
++ * use the firmware interface as the firmware ultimately takes care of
++ * mitigating overheating/undervoltage situations and we would be changing
++ * frequencies behind his back.
++ *
++ * For more information on the firmware interface check:
++ * https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface
++ */
++struct raspberrypi_firmware_prop {
++ __le32 id;
++ __le32 val;
++ __le32 disable_turbo;
++} __packed;
++
++static int raspberrypi_clock_property(struct rpi_firmware *firmware, u32 tag,
++ u32 clk, u32 *val)
++{
++ struct raspberrypi_firmware_prop msg = {
++ .id = clk,
++ .val = *val,
++ .disable_turbo = 1,
++ };
++ int ret;
++
++ ret = rpi_firmware_property(firmware, tag, &msg, sizeof(msg));
++ if (ret)
++ return ret;
++
++ *val = msg.val;
++
++ return 0;
++}
++
++static int raspberrypi_fw_pll_is_on(struct clk_hw *hw)
++{
++ struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
++ pllb);
++ u32 val = 0;
++ int ret;
++
++ ret = raspberrypi_clock_property(rpi->firmware,
++ RPI_FIRMWARE_GET_CLOCK_STATE,
++ RPI_FIRMWARE_ARM_CLK_ID, &val);
++ if (ret)
++ return 0;
++
++ return !!(val & RPI_FIRMWARE_STATE_ENABLE_BIT);
++}
++
++
++static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw,
++ unsigned long parent_rate)
++{
++ struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
++ pllb);
++ u32 val = 0;
++ int ret;
++
++ ret = raspberrypi_clock_property(rpi->firmware,
++ RPI_FIRMWARE_GET_CLOCK_RATE,
++ RPI_FIRMWARE_ARM_CLK_ID,
++ &val);
++ if (ret)
++ return ret;
++
++ return val * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
++}
++
++static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate,
++ unsigned long parent_rate)
++{
++ struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
++ pllb);
++ u32 new_rate = rate / RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
++ int ret;
++
++ ret = raspberrypi_clock_property(rpi->firmware,
++ RPI_FIRMWARE_SET_CLOCK_RATE,
++ RPI_FIRMWARE_ARM_CLK_ID,
++ &new_rate);
++ if (ret)
++ dev_err_ratelimited(rpi->dev, "Failed to change %s frequency: %d",
++ clk_hw_get_name(hw), ret);
++
++ return ret;
++}
++
++/*
++ * Sadly there is no firmware rate rounding interface. We borrowed it from
++ * clk-bcm2835.
++ */
++static int raspberrypi_pll_determine_rate(struct clk_hw *hw,
++ struct clk_rate_request *req)
++{
++ struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
++ pllb);
++ u64 div, final_rate;
++ u32 ndiv, fdiv;
++
++ /* We can't use req->rate directly as it would overflow */
++ final_rate = clamp(req->rate, rpi->min_rate, rpi->max_rate);
++
++ div = (u64)final_rate << A2W_PLL_FRAC_BITS;
++ do_div(div, req->best_parent_rate);
++
++ ndiv = div >> A2W_PLL_FRAC_BITS;
++ fdiv = div & ((1 << A2W_PLL_FRAC_BITS) - 1);
++
++ final_rate = ((u64)req->best_parent_rate *
++ ((ndiv << A2W_PLL_FRAC_BITS) + fdiv));
++
++ req->rate = final_rate >> A2W_PLL_FRAC_BITS;
++
++ return 0;
++}
++
++static const struct clk_ops raspberrypi_firmware_pll_clk_ops = {
++ .is_prepared = raspberrypi_fw_pll_is_on,
++ .recalc_rate = raspberrypi_fw_pll_get_rate,
++ .set_rate = raspberrypi_fw_pll_set_rate,
++ .determine_rate = raspberrypi_pll_determine_rate,
++};
++
++static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi)
++{
++ u32 min_rate = 0, max_rate = 0;
++ struct clk_init_data init;
++ int ret;
++
++ memset(&init, 0, sizeof(init));
++
++ /* All of the PLLs derive from the external oscillator. */
++ init.parent_names = (const char *[]){ "osc" };
++ init.num_parents = 1;
++ init.name = "pllb";
++ init.ops = &raspberrypi_firmware_pll_clk_ops;
++ init.flags = CLK_GET_RATE_NOCACHE | CLK_IGNORE_UNUSED;
++
++ /* Get min & max rates set by the firmware */
++ ret = raspberrypi_clock_property(rpi->firmware,
++ RPI_FIRMWARE_GET_MIN_CLOCK_RATE,
++ RPI_FIRMWARE_ARM_CLK_ID,
++ &min_rate);
++ if (ret) {
++ dev_err(rpi->dev, "Failed to get %s min freq: %d\n",
++ init.name, ret);
++ return ret;
++ }
++
++ ret = raspberrypi_clock_property(rpi->firmware,
++ RPI_FIRMWARE_GET_MAX_CLOCK_RATE,
++ RPI_FIRMWARE_ARM_CLK_ID,
++ &max_rate);
++ if (ret) {
++ dev_err(rpi->dev, "Failed to get %s max freq: %d\n",
++ init.name, ret);
++ return ret;
++ }
++
++ if (!min_rate || !max_rate) {
++ dev_err(rpi->dev, "Unexpected frequency range: min %u, max %u\n",
++ min_rate, max_rate);
++ return -EINVAL;
++ }
++
++ dev_info(rpi->dev, "CPU frequency range: min %u, max %u\n",
++ min_rate, max_rate);
++
++ rpi->min_rate = min_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
++ rpi->max_rate = max_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
++
++ rpi->pllb.init = &init;
++
++ return devm_clk_hw_register(rpi->dev, &rpi->pllb);
++}
++
++static int raspberrypi_register_pllb_arm(struct raspberrypi_clk *rpi)
++{
++ rpi->pllb_arm = clk_hw_register_fixed_factor(rpi->dev,
++ "pllb_arm", "pllb",
++ CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
++ 1, 2);
++ if (IS_ERR(rpi->pllb_arm)) {
++ dev_err(rpi->dev, "Failed to initialize pllb_arm\n");
++ return PTR_ERR(rpi->pllb_arm);
++ }
++
++ rpi->pllb_arm_lookup = clkdev_hw_create(rpi->pllb_arm, NULL, "cpu0");
++ if (!rpi->pllb_arm_lookup) {
++ dev_err(rpi->dev, "Failed to initialize pllb_arm_lookup\n");
++ clk_hw_unregister_fixed_factor(rpi->pllb_arm);
++ return -ENOMEM;
++ }
++
++ return 0;
++}
++
++static int raspberrypi_clk_probe(struct platform_device *pdev)
++{
++ struct device_node *firmware_node;
++ struct device *dev = &pdev->dev;
++ struct rpi_firmware *firmware;
++ struct raspberrypi_clk *rpi;
++ int ret;
++
++ firmware_node = of_find_compatible_node(NULL, NULL,
++ "raspberrypi,bcm2835-firmware");
++ if (!firmware_node) {
++ dev_err(dev, "Missing firmware node\n");
++ return -ENOENT;
++ }
++
++ firmware = rpi_firmware_get(firmware_node);
++ of_node_put(firmware_node);
++ if (!firmware)
++ return -EPROBE_DEFER;
++
++ rpi = devm_kzalloc(dev, sizeof(*rpi), GFP_KERNEL);
++ if (!rpi)
++ return -ENOMEM;
++
++ rpi->dev = dev;
++ rpi->firmware = firmware;
++
++ ret = raspberrypi_register_pllb(rpi);
++ if (ret) {
++ dev_err(dev, "Failed to initialize pllb, %d\n", ret);
++ return ret;
++ }
++
++ ret = raspberrypi_register_pllb_arm(rpi);
++ if (ret)
++ return ret;
++
++ return 0;
++}
++
++static struct platform_driver raspberrypi_clk_driver = {
++ .driver = {
++ .name = "raspberrypi-clk",
++ },
++ .probe = raspberrypi_clk_probe,
++};
++module_platform_driver(raspberrypi_clk_driver);
++
++MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de>");
++MODULE_DESCRIPTION("Raspberry Pi firmware clock driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:raspberrypi-clk");
+--
+2.21.0
+
+From e750e62addb9ee00f47ab4a73c0645d44172ab12 Mon Sep 17 00:00:00 2001
+From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+Date: Tue, 11 Jun 2019 19:58:38 +0200
+Subject: [PATCH 3/5] firmware: raspberrypi: register clk device
+
+Since clk-raspberrypi is tied to the VC4 firmware instead of particular
+hardware it's registration should be performed by the firmware driver.
+
+Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+Acked-by: Eric Anholt <eric@anholt.net>
+---
+ drivers/firmware/raspberrypi.c | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c
+index 61be15d9df7d..da26a584dca0 100644
+--- a/drivers/firmware/raspberrypi.c
++++ b/drivers/firmware/raspberrypi.c
+@@ -20,6 +20,7 @@
+ #define MBOX_CHAN_PROPERTY 8
+
+ static struct platform_device *rpi_hwmon;
++static struct platform_device *rpi_clk;
+
+ struct rpi_firmware {
+ struct mbox_client cl;
+@@ -207,6 +208,12 @@ rpi_register_hwmon_driver(struct device *dev, struct rpi_firmware *fw)
+ -1, NULL, 0);
+ }
+
++static void rpi_register_clk_driver(struct device *dev)
++{
++ rpi_clk = platform_device_register_data(dev, "raspberrypi-clk",
++ -1, NULL, 0);
++}
++
+ static int rpi_firmware_probe(struct platform_device *pdev)
+ {
+ struct device *dev = &pdev->dev;
+@@ -234,6 +241,7 @@ static int rpi_firmware_probe(struct platform_device *pdev)
+
+ rpi_firmware_print_firmware_revision(fw);
+ rpi_register_hwmon_driver(dev, fw);
++ rpi_register_clk_driver(dev);
+
+ return 0;
+ }
+@@ -254,6 +262,8 @@ static int rpi_firmware_remove(struct platform_device *pdev)
+
+ platform_device_unregister(rpi_hwmon);
+ rpi_hwmon = NULL;
++ platform_device_unregister(rpi_clk);
++ rpi_clk = NULL;
+ mbox_free_channel(fw->chan);
+
+ return 0;
+--
+2.21.0
+
+From a94ed1abc52b51c55454b3f1a7181af9d91d9d73 Mon Sep 17 00:00:00 2001
+From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+Date: Tue, 11 Jun 2019 19:58:40 +0200
+Subject: [PATCH 4/5] cpufreq: add driver for Raspbery Pi
+
+Raspberry Pi's firmware offers and interface though which update it's
+performance requirements. It allows us to request for specific runtime
+frequencies, which the firmware might or might not respect, depending on
+the firmware configuration and thermals.
+
+As the maximum and minimum frequencies are configurable in the firmware
+there is no way to know in advance their values. So the Raspberry Pi
+cpufreq driver queries them, builds an opp frequency table to then
+launch cpufreq-dt.
+
+Also, as the firmware interface might be configured as a module, making
+the cpu clock unavailable during init, this implements a full fledged
+driver, as opposed to most drivers registering cpufreq-dt, which only
+make use of an init routine.
+
+Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+Acked-by: Eric Anholt <eric@anholt.net>
+Reviewed-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/cpufreq/Kconfig.arm | 8 +++
+ drivers/cpufreq/Makefile | 1 +
+ drivers/cpufreq/raspberrypi-cpufreq.c | 97 +++++++++++++++++++++++++++
+ 3 files changed, 106 insertions(+)
+ create mode 100644 drivers/cpufreq/raspberrypi-cpufreq.c
+
+diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
+index f8129edc145e..5e9204d443ff 100644
+--- a/drivers/cpufreq/Kconfig.arm
++++ b/drivers/cpufreq/Kconfig.arm
+@@ -133,6 +133,14 @@ config ARM_QCOM_CPUFREQ_HW
+ The driver implements the cpufreq interface for this HW engine.
+ Say Y if you want to support CPUFreq HW.
+
++config ARM_RASPBERRYPI_CPUFREQ
++ tristate "Raspberry Pi cpufreq support"
++ depends on CLK_RASPBERRYPI || COMPILE_TEST
++ help
++ This adds the CPUFreq driver for Raspberry Pi
++
++ If in doubt, say N.
++
+ config ARM_S3C_CPUFREQ
+ bool
+ help
+diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
+index 689b26c6f949..121c1acb66c0 100644
+--- a/drivers/cpufreq/Makefile
++++ b/drivers/cpufreq/Makefile
+@@ -64,6 +64,7 @@ obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
+ obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
+ obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW) += qcom-cpufreq-hw.o
+ obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRYO) += qcom-cpufreq-kryo.o
++obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) += raspberrypi-cpufreq.o
+ obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
+ obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o
+ obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
+diff --git a/drivers/cpufreq/raspberrypi-cpufreq.c b/drivers/cpufreq/raspberrypi-cpufreq.c
+new file mode 100644
+index 000000000000..2bc7d9734272
+--- /dev/null
++++ b/drivers/cpufreq/raspberrypi-cpufreq.c
+@@ -0,0 +1,97 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Raspberry Pi cpufreq driver
++ *
++ * Copyright (C) 2019, Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
++ */
++
++#include <linux/clk.h>
++#include <linux/cpu.h>
++#include <linux/cpufreq.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/pm_opp.h>
++
++#define RASPBERRYPI_FREQ_INTERVAL 100000000
++
++static struct platform_device *cpufreq_dt;
++
++static int raspberrypi_cpufreq_probe(struct platform_device *pdev)
++{
++ struct device *cpu_dev;
++ unsigned long min, max;
++ unsigned long rate;
++ struct clk *clk;
++ int ret;
++
++ cpu_dev = get_cpu_device(0);
++ if (!cpu_dev) {
++ pr_err("Cannot get CPU for cpufreq driver\n");
++ return -ENODEV;
++ }
++
++ clk = clk_get(cpu_dev, NULL);
++ if (IS_ERR(clk)) {
++ dev_err(cpu_dev, "Cannot get clock for CPU0\n");
++ return PTR_ERR(clk);
++ }
++
++ /*
++ * The max and min frequencies are configurable in the Raspberry Pi
++ * firmware, so we query them at runtime.
++ */
++ min = roundup(clk_round_rate(clk, 0), RASPBERRYPI_FREQ_INTERVAL);
++ max = roundup(clk_round_rate(clk, ULONG_MAX), RASPBERRYPI_FREQ_INTERVAL);
++ clk_put(clk);
++
++ for (rate = min; rate <= max; rate += RASPBERRYPI_FREQ_INTERVAL) {
++ ret = dev_pm_opp_add(cpu_dev, rate, 0);
++ if (ret)
++ goto remove_opp;
++ }
++
++ cpufreq_dt = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
++ ret = PTR_ERR_OR_ZERO(cpufreq_dt);
++ if (ret) {
++ dev_err(cpu_dev, "Failed to create platform device, %d\n", ret);
++ goto remove_opp;
++ }
++
++ return 0;
++
++remove_opp:
++ dev_pm_opp_remove_all_dynamic(cpu_dev);
++
++ return ret;
++}
++
++static int raspberrypi_cpufreq_remove(struct platform_device *pdev)
++{
++ struct device *cpu_dev;
++
++ cpu_dev = get_cpu_device(0);
++ if (cpu_dev)
++ dev_pm_opp_remove_all_dynamic(cpu_dev);
++
++ platform_device_unregister(cpufreq_dt);
++
++ return 0;
++}
++
++/*
++ * Since the driver depends on clk-raspberrypi, which may return EPROBE_DEFER,
++ * all the activity is performed in the probe, which may be defered as well.
++ */
++static struct platform_driver raspberrypi_cpufreq_driver = {
++ .driver = {
++ .name = "raspberrypi-cpufreq",
++ },
++ .probe = raspberrypi_cpufreq_probe,
++ .remove = raspberrypi_cpufreq_remove,
++};
++module_platform_driver(raspberrypi_cpufreq_driver);
++
++MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de");
++MODULE_DESCRIPTION("Raspberry Pi cpufreq driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:raspberrypi-cpufreq");
+--
+2.21.0
+
+From af32d83d10976ff357c56adba79fa3cb06e1c32d Mon Sep 17 00:00:00 2001
+From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+Date: Tue, 11 Jun 2019 19:58:42 +0200
+Subject: [PATCH 5/5] clk: raspberrypi: register platform device for
+ raspberrypi-cpufreq
+
+As 'clk-raspberrypi' depends on RPi's firmware interface, which might be
+configured as a module, the cpu clock might not be available for the
+cpufreq driver during it's init process. So we register the
+'raspberrypi-cpufreq' platform device after the probe sequence succeeds.
+
+Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+Acked-by: Eric Anholt <eric@anholt.net>
+---
+ drivers/clk/bcm/clk-raspberrypi.c | 15 +++++++++++++++
+ 1 file changed, 15 insertions(+)
+
+diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
+index 467933767106..7f9b001f8d70 100644
+--- a/drivers/clk/bcm/clk-raspberrypi.c
++++ b/drivers/clk/bcm/clk-raspberrypi.c
+@@ -34,6 +34,7 @@
+ struct raspberrypi_clk {
+ struct device *dev;
+ struct rpi_firmware *firmware;
++ struct platform_device *cpufreq;
+
+ unsigned long min_rate;
+ unsigned long max_rate;
+@@ -272,6 +273,7 @@ static int raspberrypi_clk_probe(struct platform_device *pdev)
+
+ rpi->dev = dev;
+ rpi->firmware = firmware;
++ platform_set_drvdata(pdev, rpi);
+
+ ret = raspberrypi_register_pllb(rpi);
+ if (ret) {
+@@ -283,6 +285,18 @@ static int raspberrypi_clk_probe(struct platform_device *pdev)
+ if (ret)
+ return ret;
+
++ rpi->cpufreq = platform_device_register_data(dev, "raspberrypi-cpufreq",
++ -1, NULL, 0);
++
++ return 0;
++}
++
++static int raspberrypi_clk_remove(struct platform_device *pdev)
++{
++ struct raspberrypi_clk *rpi = platform_get_drvdata(pdev);
++
++ platform_device_unregister(rpi->cpufreq);
++
+ return 0;
+ }
+
+@@ -291,6 +305,7 @@ static struct platform_driver raspberrypi_clk_driver = {
+ .name = "raspberrypi-clk",
+ },
+ .probe = raspberrypi_clk_probe,
++ .remove = raspberrypi_clk_remove,
+ };
+ module_platform_driver(raspberrypi_clk_driver);
+
+--
+2.21.0
+
diff --git a/bcm2835-cpufreq-add-CPU-frequency-control-driver.patch b/bcm2835-cpufreq-add-CPU-frequency-control-driver.patch
deleted file mode 100644
index 36c3eea75..000000000
--- a/bcm2835-cpufreq-add-CPU-frequency-control-driver.patch
+++ /dev/null
@@ -1,399 +0,0 @@
-From fbdb31e061b67941342fc5afa714488f75174632 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Thu, 31 May 2018 19:08:12 +0100
-Subject: [PATCH 1/3] bcm2835: cpufreq: add CPU frequency control driver
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- arch/arm/boot/dts/bcm2835-rpi.dtsi | 7 ++
- arch/arm/boot/dts/bcm2837.dtsi | 33 +++++++
- drivers/clk/bcm/Kconfig | 8 ++
- drivers/clk/bcm/Makefile | 1 +
- drivers/clk/bcm/clk-raspberrypi.c | 138 +++++++++++++++++++++++++++++
- 5 files changed, 187 insertions(+)
- create mode 100644 drivers/clk/bcm/clk-raspberrypi.c
-
-diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
-index 29f970f864dc..6d0f43957af4 100644
---- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
-+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
-@@ -35,6 +35,13 @@
- reg = <0x7e00b840 0x3c>;
- interrupts = <0 2>;
- };
-+
-+ arm_clk: arm_clk {
-+ compatible = "raspberrypi,bcm2835-cpu";
-+ clocks = <&clocks BCM2835_CLOCK_VPU>;
-+ #clock-cells = <0>;
-+ clock-output-names = "arm";
-+ };
- };
- };
-
-diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
-index beb6c502dadc..9cfc553a3633 100644
---- a/arch/arm/boot/dts/bcm2837.dtsi
-+++ b/arch/arm/boot/dts/bcm2837.dtsi
-@@ -44,6 +44,9 @@
- reg = <0>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x000000d8>;
-+ clocks = <&arm_clk>;
-+ clock-names = "cpu";
-+ operating-points-v2 = <&cpu0_opp_table>;
- };
-
- cpu1: cpu@1 {
-@@ -52,6 +55,9 @@
- reg = <1>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x000000e0>;
-+ clocks = <&arm_clk>;
-+ clock-names = "cpu";
-+ operating-points-v2 = <&cpu0_opp_table>;
- };
-
- cpu2: cpu@2 {
-@@ -60,6 +66,9 @@
- reg = <2>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x000000e8>;
-+ clocks = <&arm_clk>;
-+ clock-names = "cpu";
-+ operating-points-v2 = <&cpu0_opp_table>;
- };
-
- cpu3: cpu@3 {
-@@ -68,6 +77,30 @@
- reg = <3>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x000000f0>;
-+ clocks = <&arm_clk>;
-+ clock-names = "cpu";
-+ operating-points-v2 = <&cpu0_opp_table>;
-+ };
-+ };
-+
-+ cpu0_opp_table: opp_table0 {
-+ compatible = "operating-points-v2";
-+ opp-shared;
-+
-+ opp@600000000 {
-+ opp-hz = /bits/ 64 <600000000>;
-+ clock-latency-ns = <355000>;
-+ opp-suspend;
-+ };
-+
-+ opp@900000000 {
-+ opp-hz = /bits/ 64 <900000000>;
-+ clock-latency-ns = <355000>;
-+ };
-+
-+ opp@1200000000 {
-+ opp-hz = /bits/ 64 <1200000000>;
-+ clock-latency-ns = <355000>;
- };
- };
- };
-diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
-index 4c4bd85f707c..e40bd19da22b 100644
---- a/drivers/clk/bcm/Kconfig
-+++ b/drivers/clk/bcm/Kconfig
-@@ -63,3 +63,11 @@ config CLK_BCM_SR
- default ARCH_BCM_IPROC
- help
- Enable common clock framework support for the Broadcom Stingray SoC
-+
-+config CLK_RASPBERRYPI_CPU
-+ bool "Raspberry Pi CPU clock driver"
-+ depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
-+ depends on RASPBERRYPI_FIRMWARE=y
-+ help
-+ This enables support for the RPi CPU clock which can be adjusted
-+ via the RPi firmware.
-diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
-index 002661d39128..a028b0a90b6e 100644
---- a/drivers/clk/bcm/Makefile
-+++ b/drivers/clk/bcm/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-a
- obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
- obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835-aux.o
- obj-$(CONFIG_ARCH_BCM_53573) += clk-bcm53573-ilp.o
-+obj-$(CONFIG_CLK_RASPBERRYPI_CPU) += clk-raspberrypi.o
- obj-$(CONFIG_CLK_BCM_CYGNUS) += clk-cygnus.o
- obj-$(CONFIG_CLK_BCM_HR2) += clk-hr2.o
- obj-$(CONFIG_CLK_BCM_NSP) += clk-nsp.o
-diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
-new file mode 100644
-index 000000000000..046efc822a59
---- /dev/null
-+++ b/drivers/clk/bcm/clk-raspberrypi.c
-@@ -0,0 +1,138 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Raspberry Pi CPU clock driver
-+ *
-+ * Copyright (C) 2018 Stefan Wahren <stefan.wahren@i2se.com>
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/clk-provider.h>
-+#include <linux/device.h>
-+#include <linux/err.h>
-+#include <linux/module.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <soc/bcm2835/raspberrypi-firmware.h>
-+
-+#define VCMSG_ID_ARM_CLOCK 0x000000003 /* Clock/Voltage ID's */
-+
-+struct rpi_cpu_clkgen {
-+ struct clk_hw hw;
-+ struct rpi_firmware *fw;
-+};
-+
-+/* tag part of the message */
-+struct prop {
-+ u32 id; /* the ID of the clock/voltage to get or set */
-+ u32 val; /* the value (e.g. rate (in Hz)) to set */
-+} __packed;
-+
-+static int rpi_cpu_clock_property(struct rpi_firmware *fw, u32 tag, u32 *val)
-+{
-+ int ret;
-+ struct prop msg = {
-+ .id = VCMSG_ID_ARM_CLOCK,
-+ .val = *val,
-+ };
-+
-+ ret = rpi_firmware_property(fw, tag, &msg, sizeof(msg));
-+ if (ret)
-+ return ret;
-+
-+ *val = msg.val;
-+
-+ return 0;
-+}
-+
-+static unsigned long rpi_cpu_get_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ struct rpi_cpu_clkgen *cpu = container_of(hw, struct rpi_cpu_clkgen, hw);
-+ u32 rate = 0;
-+
-+ rpi_cpu_clock_property(cpu->fw, RPI_FIRMWARE_GET_CLOCK_RATE, &rate);
-+
-+ return rate;
-+}
-+
-+static long rpi_cpu_round_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long *parent_rate)
-+{
-+ return rate;
-+}
-+
-+static int rpi_cpu_set_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long parent_rate)
-+{
-+ struct rpi_cpu_clkgen *cpu = container_of(hw, struct rpi_cpu_clkgen, hw);
-+ u32 new_rate = rate;
-+
-+ return rpi_cpu_clock_property(cpu->fw, RPI_FIRMWARE_SET_CLOCK_RATE,
-+ &new_rate);
-+}
-+
-+static const struct clk_ops rpi_cpu_ops = {
-+ .recalc_rate = rpi_cpu_get_rate,
-+ .round_rate = rpi_cpu_round_rate,
-+ .set_rate = rpi_cpu_set_rate,
-+};
-+
-+static int rpi_cpu_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct device_node *fw_node;
-+ struct rpi_cpu_clkgen *cpu;
-+ struct clk_init_data *init;
-+ int ret;
-+
-+ cpu = devm_kzalloc(dev, sizeof(*cpu), GFP_KERNEL);
-+ if (!cpu)
-+ return -ENOMEM;
-+
-+ init = devm_kzalloc(dev, sizeof(*init), GFP_KERNEL);
-+ if (!init)
-+ return -ENOMEM;
-+
-+ fw_node = of_find_compatible_node(NULL, NULL,
-+ "raspberrypi,bcm2835-firmware");
-+ if (!fw_node) {
-+ dev_err(dev, "Missing firmware node\n");
-+ return -ENOENT;
-+ }
-+
-+ cpu->fw = rpi_firmware_get(fw_node);
-+ of_node_put(fw_node);
-+ if (!cpu->fw)
-+ return -EPROBE_DEFER;
-+
-+ init->name = dev->of_node->name;
-+ init->ops = &rpi_cpu_ops;
-+
-+ cpu->hw.init = init;
-+ ret = devm_clk_hw_register(dev, &cpu->hw);
-+ if (ret)
-+ return ret;
-+
-+ return of_clk_add_hw_provider(dev->of_node, of_clk_hw_simple_get,
-+ &cpu->hw);
-+}
-+
-+static const struct of_device_id rpi_cpu_of_match[] = {
-+ { .compatible = "raspberrypi,bcm2835-cpu", },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, rpi_cpu_of_match);
-+
-+static struct platform_driver rpi_cpu_driver = {
-+ .driver = {
-+ .name = "raspberrypi-cpu",
-+ .of_match_table = rpi_cpu_of_match,
-+ },
-+ .probe = rpi_cpu_probe,
-+};
-+builtin_platform_driver(rpi_cpu_driver);
-+
-+MODULE_AUTHOR("Stefan Wahren <stefan.wahren@i2se.com>");
-+MODULE_DESCRIPTION("Raspberry Pi CPU clock driver");
-+MODULE_LICENSE("GPL v2");
---
-2.20.1
-
-
-From 0681db63db37cf9015ef9b667c237c3974de04e6 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Mon, 4 Jun 2018 09:14:10 +0100
-Subject: [PATCH 2/3] add 1.4 ghz OPP for the 3B+
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 7 +++++++
- 1 file changed, 7 insertions(+)
-
-diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
-index 42bb09044cc7..3333c080696c 100644
---- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
-+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
-@@ -106,3 +106,10 @@
- pinctrl-0 = <&uart1_gpio14>;
- status = "okay";
- };
-+
-+&cpu0_opp_table {
-+ opp@1400000000 {
-+ opp-hz = /bits/ 64 <1400000000>;
-+ clock-latency-ns = <355000>;
-+ };
-+};
---
-2.20.1
-
-
-From 65f821f03ac635f28c8c79c5e436b398194521f2 Mon Sep 17 00:00:00 2001
-From: Stefan Wahren <stefan.wahren@i2se.com>
-Date: Wed, 26 Sep 2018 21:13:22 +0200
-Subject: [PATCH 3/3] ARM: bcm2837: Use CPU0 as cooling device
-
-Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
----
- arch/arm/boot/dts/bcm2837.dtsi | 25 +++++++++++++++++++++++++
- arch/arm/boot/dts/bcm283x.dtsi | 2 +-
- 2 files changed, 26 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
-index 9cfc553a3633..1590d94b618e 100644
---- a/arch/arm/boot/dts/bcm2837.dtsi
-+++ b/arch/arm/boot/dts/bcm2837.dtsi
-@@ -1,4 +1,5 @@
- #include "bcm283x.dtsi"
-+#include <dt-bindings/thermal/thermal.h>
-
- / {
- compatible = "brcm,bcm2837";
-@@ -47,6 +48,7 @@
- clocks = <&arm_clk>;
- clock-names = "cpu";
- operating-points-v2 = <&cpu0_opp_table>;
-+ #cooling-cells = <2>;
- };
-
- cpu1: cpu@1 {
-@@ -58,6 +60,7 @@
- clocks = <&arm_clk>;
- clock-names = "cpu";
- operating-points-v2 = <&cpu0_opp_table>;
-+ #cooling-cells = <2>;
- };
-
- cpu2: cpu@2 {
-@@ -69,6 +72,7 @@
- clocks = <&arm_clk>;
- clock-names = "cpu";
- operating-points-v2 = <&cpu0_opp_table>;
-+ #cooling-cells = <2>;
- };
-
- cpu3: cpu@3 {
-@@ -80,6 +84,7 @@
- clocks = <&arm_clk>;
- clock-names = "cpu";
- operating-points-v2 = <&cpu0_opp_table>;
-+ #cooling-cells = <2>;
- };
- };
-
-@@ -117,6 +122,26 @@
-
- &cpu_thermal {
- coefficients = <(-538) 412000>;
-+
-+ trips {
-+ cpu_alert0: cpu-alert0 {
-+ temperature = <70000>;
-+ hysteresis = <0>;
-+ type = "passive";
-+ };
-+ };
-+
-+ cooling-maps {
-+ map0 {
-+ trip = <&cpu_alert0>;
-+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-+ };
-+
-+ map1 {
-+ trip = <&cpu_crit>;
-+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-+ };
-+ };
- };
-
- /* enable thermal sensor with the correct compatible property set */
-diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
-index 31b29646b14c..2def0684d198 100644
---- a/arch/arm/boot/dts/bcm283x.dtsi
-+++ b/arch/arm/boot/dts/bcm283x.dtsi
-@@ -38,7 +38,7 @@
- thermal-sensors = <&thermal>;
-
- trips {
-- cpu-crit {
-+ cpu_crit: cpu-crit {
- temperature = <80000>;
- hysteresis = <0>;
- type = "critical";
---
-2.20.1
-
diff --git a/configs/fedora/generic/arm/CONFIG_ARM_RASPBERRYPI_CPUFREQ b/configs/fedora/generic/arm/CONFIG_ARM_RASPBERRYPI_CPUFREQ
new file mode 100644
index 000000000..01f6e4534
--- /dev/null
+++ b/configs/fedora/generic/arm/CONFIG_ARM_RASPBERRYPI_CPUFREQ
@@ -0,0 +1 @@
+CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
diff --git a/configs/fedora/generic/arm/CONFIG_CLK_RASPBERRYPI b/configs/fedora/generic/arm/CONFIG_CLK_RASPBERRYPI
new file mode 100644
index 000000000..3ebdfbc86
--- /dev/null
+++ b/configs/fedora/generic/arm/CONFIG_CLK_RASPBERRYPI
@@ -0,0 +1 @@
+CONFIG_CLK_RASPBERRYPI=y
diff --git a/configs/fedora/generic/arm/CONFIG_CLK_RASPBERRYPI_CPU b/configs/fedora/generic/arm/CONFIG_CLK_RASPBERRYPI_CPU
deleted file mode 100644
index 566c678d3..000000000
--- a/configs/fedora/generic/arm/CONFIG_CLK_RASPBERRYPI_CPU
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_CLK_RASPBERRYPI_CPU=y
diff --git a/kernel-aarch64-debug.config b/kernel-aarch64-debug.config
index 4fc36d8a3..2bf1faceb 100644
--- a/kernel-aarch64-debug.config
+++ b/kernel-aarch64-debug.config
@@ -355,6 +355,7 @@ CONFIG_ARM_PSCI=y
CONFIG_ARM_PTDUMP_DEBUGFS=y
CONFIG_ARM_QCOM_CPUFREQ_HW=m
CONFIG_ARM_QCOM_CPUFREQ_KRYO=m
+CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
CONFIG_ARM_RK3399_DMC_DEVFREQ=m
CONFIG_ARM_SBSA_WATCHDOG=m
CONFIG_ARM_SCMI_CPUFREQ=m
@@ -937,7 +938,7 @@ CONFIG_CLK_IMX8MM=y
CONFIG_CLK_IMX8MQ=y
CONFIG_CLK_IMX8QXP=y
# CONFIG_CLK_QORIQ is not set
-CONFIG_CLK_RASPBERRYPI_CPU=y
+CONFIG_CLK_RASPBERRYPI=y
# CONFIG_CLK_SIFIVE is not set
CONFIG_CLK_SP810=y
CONFIG_CLKSRC_VERSATILE=y
diff --git a/kernel-aarch64.config b/kernel-aarch64.config
index 9fef50687..2406f26ab 100644
--- a/kernel-aarch64.config
+++ b/kernel-aarch64.config
@@ -355,6 +355,7 @@ CONFIG_ARM_PSCI=y
# CONFIG_ARM_PTDUMP_DEBUGFS is not set
CONFIG_ARM_QCOM_CPUFREQ_HW=m
CONFIG_ARM_QCOM_CPUFREQ_KRYO=m
+CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
CONFIG_ARM_RK3399_DMC_DEVFREQ=m
CONFIG_ARM_SBSA_WATCHDOG=m
CONFIG_ARM_SCMI_CPUFREQ=m
@@ -937,7 +938,7 @@ CONFIG_CLK_IMX8MM=y
CONFIG_CLK_IMX8MQ=y
CONFIG_CLK_IMX8QXP=y
# CONFIG_CLK_QORIQ is not set
-CONFIG_CLK_RASPBERRYPI_CPU=y
+CONFIG_CLK_RASPBERRYPI=y
# CONFIG_CLK_SIFIVE is not set
CONFIG_CLK_SP810=y
CONFIG_CLKSRC_VERSATILE=y
diff --git a/kernel-armv7hl-debug.config b/kernel-armv7hl-debug.config
index dd6a52b6d..8266866d2 100644
--- a/kernel-armv7hl-debug.config
+++ b/kernel-armv7hl-debug.config
@@ -348,6 +348,7 @@ CONFIG_ARM_PSCI=y
CONFIG_ARM_PTDUMP_DEBUGFS=y
CONFIG_ARM_QCOM_CPUFREQ_HW=m
CONFIG_ARM_QCOM_CPUFREQ_KRYO=m
+CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
CONFIG_ARM_RK3399_DMC_DEVFREQ=m
CONFIG_ARM_SCMI_CPUFREQ=m
CONFIG_ARM_SCMI_POWER_DOMAIN=m
@@ -939,7 +940,7 @@ CONFIG_CIFS_XATTR=y
CONFIG_CLEANCACHE=y
# CONFIG_CLK_HSDK is not set
# CONFIG_CLK_QORIQ is not set
-CONFIG_CLK_RASPBERRYPI_CPU=y
+CONFIG_CLK_RASPBERRYPI=y
# CONFIG_CLK_SIFIVE is not set
CONFIG_CLK_SP810=y
CONFIG_CLKSRC_VERSATILE=y
diff --git a/kernel-armv7hl-lpae-debug.config b/kernel-armv7hl-lpae-debug.config
index 5e76c5e29..86af290a7 100644
--- a/kernel-armv7hl-lpae-debug.config
+++ b/kernel-armv7hl-lpae-debug.config
@@ -338,6 +338,7 @@ CONFIG_ARM_PSCI=y
CONFIG_ARM_PTDUMP_DEBUGFS=y
CONFIG_ARM_QCOM_CPUFREQ_HW=m
CONFIG_ARM_QCOM_CPUFREQ_KRYO=m
+CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
CONFIG_ARM_RK3399_DMC_DEVFREQ=m
CONFIG_ARM_SCMI_CPUFREQ=m
CONFIG_ARM_SCMI_POWER_DOMAIN=m
@@ -913,7 +914,7 @@ CONFIG_CIFS_XATTR=y
CONFIG_CLEANCACHE=y
# CONFIG_CLK_HSDK is not set
# CONFIG_CLK_QORIQ is not set
-CONFIG_CLK_RASPBERRYPI_CPU=y
+CONFIG_CLK_RASPBERRYPI=y
# CONFIG_CLK_SIFIVE is not set
CONFIG_CLK_SP810=y
CONFIG_CLKSRC_VERSATILE=y
diff --git a/kernel-armv7hl-lpae.config b/kernel-armv7hl-lpae.config
index 64dea9608..c5684a356 100644
--- a/kernel-armv7hl-lpae.config
+++ b/kernel-armv7hl-lpae.config
@@ -338,6 +338,7 @@ CONFIG_ARM_PSCI=y
# CONFIG_ARM_PTDUMP_DEBUGFS is not set
CONFIG_ARM_QCOM_CPUFREQ_HW=m
CONFIG_ARM_QCOM_CPUFREQ_KRYO=m
+CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
CONFIG_ARM_RK3399_DMC_DEVFREQ=m
CONFIG_ARM_SCMI_CPUFREQ=m
CONFIG_ARM_SCMI_POWER_DOMAIN=m
@@ -913,7 +914,7 @@ CONFIG_CIFS_XATTR=y
CONFIG_CLEANCACHE=y
# CONFIG_CLK_HSDK is not set
# CONFIG_CLK_QORIQ is not set
-CONFIG_CLK_RASPBERRYPI_CPU=y
+CONFIG_CLK_RASPBERRYPI=y
# CONFIG_CLK_SIFIVE is not set
CONFIG_CLK_SP810=y
CONFIG_CLKSRC_VERSATILE=y
diff --git a/kernel-armv7hl.config b/kernel-armv7hl.config
index 104b3eed9..c847d6f88 100644
--- a/kernel-armv7hl.config
+++ b/kernel-armv7hl.config
@@ -348,6 +348,7 @@ CONFIG_ARM_PSCI=y
# CONFIG_ARM_PTDUMP_DEBUGFS is not set
CONFIG_ARM_QCOM_CPUFREQ_HW=m
CONFIG_ARM_QCOM_CPUFREQ_KRYO=m
+CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
CONFIG_ARM_RK3399_DMC_DEVFREQ=m
CONFIG_ARM_SCMI_CPUFREQ=m
CONFIG_ARM_SCMI_POWER_DOMAIN=m
@@ -939,7 +940,7 @@ CONFIG_CIFS_XATTR=y
CONFIG_CLEANCACHE=y
# CONFIG_CLK_HSDK is not set
# CONFIG_CLK_QORIQ is not set
-CONFIG_CLK_RASPBERRYPI_CPU=y
+CONFIG_CLK_RASPBERRYPI=y
# CONFIG_CLK_SIFIVE is not set
CONFIG_CLK_SP810=y
CONFIG_CLKSRC_VERSATILE=y
diff --git a/kernel.spec b/kernel.spec
index a30cddb0b..49011998c 100644
--- a/kernel.spec
+++ b/kernel.spec
@@ -551,7 +551,7 @@ Patch305: arm-sdhci-esdhc-imx-fixes.patch
Patch306: arm64-rock960-enable-tsadc.patch
-Patch330: bcm2835-cpufreq-add-CPU-frequency-control-driver.patch
+Patch330: ARM-cpufreq-support-for-Raspberry-Pi.patch
Patch331: watchdog-bcm2835_wdt-Fix-module-autoload.patch
@@ -1821,6 +1821,9 @@ fi
#
#
%changelog
+* Wed Jun 12 2019 Peter Robinson <pbrobinson@fedoraproject.org>
+- Raspberry Pi: move to cpufreq driver accepted for upstream \o/
+
* Wed Jun 12 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc4.git1.1
- Linux v5.2-rc4-20-gaa7235483a83
- Reenable debugging options.