summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorKyle McMartin <kmcmarti@redhat.com>2014-09-29 14:14:17 -0400
committerKyle McMartin <kmcmarti@redhat.com>2014-09-29 18:09:56 -0400
commit8462484ef2e9db49c8435ac67821f8b97e96159c (patch)
treeb5c5257b4972837c6e1d2fb17081128c3e2e848c
parentc33dae81dc559b3ae2feb151fa3fffa44a0ccb90 (diff)
downloadkernel-8462484ef2e9db49c8435ac67821f8b97e96159c.tar.gz
kernel-8462484ef2e9db49c8435ac67821f8b97e96159c.tar.xz
kernel-8462484ef2e9db49c8435ac67821f8b97e96159c.zip
Update kernel-arm64.patch from git.
-rw-r--r--config-arm6418
-rw-r--r--config-generic2
-rw-r--r--kernel-arm64.patch5298
-rw-r--r--kernel.spec3
4 files changed, 4579 insertions, 742 deletions
diff --git a/config-arm64 b/config-arm64
index f6c244ef6..c9b8861b2 100644
--- a/config-arm64
+++ b/config-arm64
@@ -117,3 +117,21 @@ CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
+
+# CONFIG_PNP_DEBUG_MESSAGES is not set
+CONFIG_NET_SB1000=y
+CONFIG_SBSAUART_TTY=y
+CONFIG_I2C_SCMI=m
+CONFIG_SENSORS_ACPI_POWER=m
+CONFIG_IMX_THERMAL=m
+CONFIG_PWM_LPSS=m
+CONFIG_ACPI=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_EC_DEBUGFS=y
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_IPMI=y
+CONFIG_ACPI_CONTAINER=y
+CONFIG_ACPI_HED=m
+CONFIG_ACPI_CUSTOM_METHOD=m
diff --git a/config-generic b/config-generic
index 3f129610a..414db23ff 100644
--- a/config-generic
+++ b/config-generic
@@ -5390,3 +5390,5 @@ CONFIG_FMC_CHARDEV=m
# CONFIG_NET_XGENE is not set
# CONFIG_GLOB_SELFTEST is not set
+
+# CONFIG_SBSAUART_TTY is not set
diff --git a/kernel-arm64.patch b/kernel-arm64.patch
index 5334f7229..a8813c1fb 100644
--- a/kernel-arm64.patch
+++ b/kernel-arm64.patch
@@ -1,42 +1,329 @@
- .../devicetree/bindings/pci/xgene-pci.txt | 52 ++
- MAINTAINERS | 7 +
- arch/arm64/Kconfig | 19 +-
+ Documentation/arm64/arm-acpi.txt | 218 +++++++
+ .../devicetree/bindings/pci/xgene-pci.txt | 57 ++
+ Documentation/kernel-parameters.txt | 3 +-
+ MAINTAINERS | 8 +
+ arch/arm/include/asm/io.h | 1 +
+ arch/arm/include/asm/kvm_mmu.h | 13 +
+ arch/arm/kvm/arm.c | 23 +-
+ arch/arm/mach-integrator/pci_v3.c | 23 +-
+ arch/arm64/Kconfig | 28 +-
+ arch/arm64/Makefile | 1 +
arch/arm64/boot/dts/apm-mustang.dts | 8 +
- arch/arm64/boot/dts/apm-storm.dtsi | 180 ++++-
+ arch/arm64/boot/dts/apm-storm.dtsi | 165 ++++++
arch/arm64/include/asm/Kbuild | 1 +
+ arch/arm64/include/asm/acenv.h | 18 +
+ arch/arm64/include/asm/acpi.h | 99 ++++
+ arch/arm64/include/asm/cpu_ops.h | 1 +
arch/arm64/include/asm/elf.h | 3 +-
arch/arm64/include/asm/io.h | 3 +-
- arch/arm64/include/asm/pci.h | 49 ++
- arch/arm64/kernel/Makefile | 1 +
+ arch/arm64/include/asm/kvm_arm.h | 17 +-
+ arch/arm64/include/asm/kvm_mmu.h | 75 +++
+ arch/arm64/include/asm/pci.h | 37 ++
+ arch/arm64/include/asm/pgtable.h | 2 +
+ arch/arm64/include/asm/psci.h | 3 +-
+ arch/arm64/include/asm/smp.h | 10 +-
+ arch/arm64/kernel/Makefile | 5 +-
+ arch/arm64/kernel/acpi.c | 397 +++++++++++++
+ arch/arm64/kernel/cpu_ops.c | 8 +-
arch/arm64/kernel/efi-stub.c | 16 +-
arch/arm64/kernel/efi.c | 11 +
arch/arm64/kernel/head.S | 6 +-
- arch/arm64/kernel/pci.c | 38 ++
+ arch/arm64/kernel/pci.c | 70 +++
arch/arm64/kernel/process.c | 6 +
- arch/arm64/kernel/smp_spin_table.c | 21 +-
- drivers/ata/ahci_xgene.c | 3 +-
- drivers/irqchip/irq-gic.c | 32 +-
- drivers/of/address.c | 108 +++
- drivers/of/of_pci.c | 136 ++++
- drivers/pci/host-bridge.c | 18 +-
+ arch/arm64/kernel/psci.c | 78 ++-
+ arch/arm64/kernel/setup.c | 42 +-
+ arch/arm64/kernel/smp.c | 2 +-
+ arch/arm64/kernel/smp_parking_protocol.c | 110 ++++
+ arch/arm64/kernel/smp_spin_table.c | 22 +-
+ arch/arm64/kernel/time.c | 7 +
+ arch/arm64/kvm/hyp-init.S | 20 +-
+ arch/arm64/mm/dma-mapping.c | 65 +++
+ arch/arm64/pci/Makefile | 1 +
+ arch/arm64/pci/pci.c | 28 +
+ drivers/acpi/Kconfig | 6 +-
+ drivers/acpi/Makefile | 6 +-
+ drivers/acpi/acpica/utresrc.c | 4 +-
+ drivers/acpi/bus.c | 3 +
+ drivers/acpi/internal.h | 5 +
+ drivers/acpi/osl.c | 6 +-
+ drivers/acpi/processor_core.c | 37 ++
+ drivers/acpi/sleep-arm.c | 28 +
+ drivers/acpi/tables.c | 115 +++-
+ drivers/acpi/utils.c | 26 +
+ drivers/ata/Kconfig | 2 +-
+ drivers/ata/ahci_platform.c | 13 +
+ drivers/ata/ahci_xgene.c | 30 +-
+ drivers/clocksource/arm_arch_timer.c | 120 +++-
+ drivers/irqchip/irq-gic-v3.c | 10 +
+ drivers/irqchip/irq-gic.c | 116 ++++
+ drivers/irqchip/irqchip.c | 3 +
+ drivers/of/address.c | 154 +++++
+ drivers/of/of_pci.c | 142 +++++
drivers/pci/host/Kconfig | 10 +
drivers/pci/host/Makefile | 1 +
- drivers/pci/host/pci-xgene.c | 725 +++++++++++++++++++++
- drivers/pci/pci.c | 37 ++
- drivers/pci/probe.c | 68 +-
+ drivers/pci/host/pci-tegra.c | 10 +-
+ drivers/pci/host/pci-xgene.c | 646 +++++++++++++++++++++
+ drivers/pci/host/pcie-rcar.c | 21 +-
+ drivers/pci/pci.c | 40 ++
+ drivers/pci/probe.c | 46 +-
+ drivers/pnp/resource.c | 2 +
+ drivers/tty/Kconfig | 6 +
+ drivers/tty/Makefile | 1 +
+ drivers/tty/sbsauart.c | 355 +++++++++++
+ drivers/tty/serial/8250/8250_dw.c | 9 +
+ include/acpi/acnames.h | 4 +
+ include/acpi/acpi_bus.h | 2 +
+ include/acpi/acpi_io.h | 6 +
+ include/acpi/acpixf.h | 2 +-
+ include/acpi/actbl1.h | 19 +-
+ include/acpi/actbl3.h | 9 +-
include/asm-generic/io.h | 2 +-
- include/linux/of_address.h | 14 +-
- include/linux/of_pci.h | 10 +
- include/linux/pci.h | 15 +
+ include/asm-generic/pgtable.h | 4 +
+ include/kvm/arm_vgic.h | 20 +-
+ include/linux/acpi.h | 5 +
+ include/linux/clocksource.h | 6 +
+ include/linux/irqchip/arm-gic-acpi.h | 31 +
+ include/linux/irqchip/arm-gic.h | 2 +
+ include/linux/of_address.h | 17 +-
+ include/linux/of_pci.h | 13 +
+ include/linux/pci.h | 64 +-
tools/perf/arch/arm64/include/perf_regs.h | 2 +
- 31 files changed, 1533 insertions(+), 69 deletions(-)
+ virt/kvm/arm/arch_timer.c | 108 ++--
+ virt/kvm/arm/vgic-v2.c | 75 ++-
+ virt/kvm/arm/vgic-v3.c | 8 +-
+ virt/kvm/arm/vgic.c | 32 +-
+ 94 files changed, 3840 insertions(+), 275 deletions(-)
+diff --git a/Documentation/arm64/arm-acpi.txt b/Documentation/arm64/arm-acpi.txt
+new file mode 100644
+index 0000000..b7dc826
+--- /dev/null
++++ b/Documentation/arm64/arm-acpi.txt
+@@ -0,0 +1,218 @@
++ACPI on ARMv8 Servers
++---------------------
++
++ACPI can be used for ARMv8 general purpose servers designed to follow
++the SBSA specification (currently available to people with an ARM login at
++http://silver.arm.com).
++
++The kernel will implement minimum ACPI version is 5.1 + errata as released by
++the UEFI Forum, which is available at <http://www.uefi.org/acpi/specs>.
++
++If the machine does not meet the requirements of the SBSA, or cannot be
++described in the required ACPI specifications then it is likely that Device Tree
++(DT) is more suitable for the hardware.
++
++Relationship with Device Tree
++-----------------------------
++
++ACPI support in drivers and subsystems for ARMv8 should never be mutually
++exclusive with DT support at compile time.
++
++At boot time the kernel will only use one description method depending on
++parameters passed from the bootloader (including kernel bootargs).
++
++Regardless of whether DT or ACPI is used, the kernel must always be capable
++of booting with either scheme (in kernels with both schemes enabled at compile
++time).
++
++When booting using ACPI tables the /chosen node in DT will still be parsed
++to extract the kernel command line and initrd path. No other section of
++the DT will be used.
++
++Booting using ACPI tables
++-------------------------
++
++Currently, the only defined method to pass ACPI tables to the kernel on ARMv8
++is via the UEFI system configuration table.
++
++The UEFI implementation MUST set the ACPI_20_TABLE_GUID to point to the
++RSDP table (the table with the ACPI signature "RSD PTR ").
++
++The pointer to the RSDP table will be retrieved from EFI by the ACPI core.
++
++Processing of ACPI tables may be disabled by passing acpi=off on the kernel
++command line.
++
++DO use an XSDT; RSDTs are deprecated and should not be used on arm64. They
++only allow for 32-bit addresses.
++
++DO NOT use the 32-bit address fields in the FADT; they are deprecated. The
++64-bit alternatives MUST be used.
++
++The minimum set of tables MUST include RSDP, XSDT, FACS, FADT, DSDT, MADT
++and GTDT. If PCI is used the MCFG table MUST also be present.
++
++ACPI Detection
++--------------
++
++Drivers should determine their probe() type by checking for ACPI_HANDLE,
++or .of_node, or other information in the device structure. This is
++detailed further in the "Driver Recommendations" section.
++
++In non-driver code If the presence of ACPI needs to be detected at runtime,
++then check the value of acpi_disabled. If CONFIG_ACPI is not set,
++acpi_disabled will always be 1.
++
++Device Enumeration
++------------------
++
++Device descriptions in ACPI should use standard recognized ACPI interfaces.
++These are far simpler than the information provided via Device Tree. Drivers
++should take into account this simplicity and work with sensible defaults.
++
++On no account should a Device Tree attempt to be replicated in ASL using such
++constructs as Name(KEY0, "Value1") type constructs. Additional driver specific
++data should be represented with the appropriate _DSD (ACPI Section 6.2.5)
++structure. _DSM (ACPI Section 9.14.1) should only be used if _DSD cannot
++represent the data required.
++
++This data should be rare and not OS specific. For x86 ACPI has taken to
++identifying itself as Windows because it was found that only one path was
++routinely tested. For ARMv8 it would be preferable to have only one well
++tested path.
++
++_DSD covers more than the generic server case and care should be taken not to
++replicate highly specific embedded behaviour from DT into generic servers.
++
++Common _DSD bindings should be submitted to ASWG to be included in the
++document :-
++
++http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel.htm
++
++If these bindings are mirrored from DT care should be taken to ensure they are
++reviewed as DT bindings before submission to limit divergance in bindings.
++
++Programmable Power Control Resources
++------------------------------------
++
++Programmable power control resources include such resources as voltage/current
++providers (regulators) and clock sources.
++
++For power control of these resources they should be represented with Power
++Resource Objects (ACPI Section 7.1). The ACPI core will then handle correctly
++enabling/disabling of resources as they are needed.
++
++The ACPI 5.1 specification does not contain any standard binding for these
++objects to enable programmable levels or rates so this should be avoided if
++possible and the resources set to appropriate levels by the firmware. If this is
++not possible then any manipulation should be abstracted in ASL.
++
++Each device in ACPI has D-states and these can be controlled through
++the optional methods _PS0..._PS3 where _PS0 is full on and _PS3 is full off.
++
++If either _PS0 or _PS3 is implemented, then the other method must also be
++implemented.
++
++If a device requires usage or setup of a power resource when on, the ASL
++should organize that it is allocated/enabled using the _PS0 method.
++
++Resources allocated/enabled in the _PS0 method should be disabled/de-allocated
++in the _PS3 method.
++
++Such code in _PS? methods will of course be very platform specific but
++should allow the driver to operate the device without special non-standard
++values being read from ASL. Further, abstracting the use of these resources
++allows hardware revisions without requiring updates to the kernel.
++
++Clocks
++------
++
++Like clocks that are part of the power resources there is no standard way
++to represent a clock tree in ACPI 5.1 in a similar manner to how it is
++described in DT.
++
++Devices affected by this include things like UARTs, SoC driven LCD displays,
++etc.
++
++The firmware (for example, UEFI) should initialize these clocks to fixed working
++values before the kernel is executed.
++
++Driver Recommendations
++----------------------
++
++DO NOT remove any FDT handling when adding ACPI support for a driver. Different
++systems may use the same device.
++
++DO try and keep complex sections of ACPI and DT functionality separate. This
++may mean a patch to break out some complex DT to another function before
++the patch to add ACPI. This may happen in other functions but is most likely
++in probe function. This gives a clearer flow of data for reviewing driver
++source.
++
++probe() :-
++
++static int device_probe_dt(struct platform_device *pdev)
++{
++ /* DT specific functionality */
++ ...
++}
++
++static int device_probe_acpi(struct platform_device *pdev)
++{
++ /* ACPI specific functionality */
++ ...
++}
++
++static int device_probe(stuct platform_device *pdev)
++{
++ ...
++ struct device_node node = pdev->dev.of_node;
++ ...
++
++ if (node)
++ ret = device_probe_dt(pdev);
++ else if (ACPI_HANDLE(&pdev->dev))
++ ret = device_probe_acpi(pdev);
++ else
++ /* other initialization */
++ ...
++ /* Continue with any generic probe operations */
++ ...
++}
++
++DO keep the MODULE_DEVICE_TABLE entries together in the driver to make it clear
++the different names the driver is probed for, both from DT and from ACPI.
++
++module device tables :-
++
++static struct of_device_id virtio_mmio_match[] = {
++ { .compatible = "virtio,mmio", },
++ { }
++};
++MODULE_DEVICE_TABLE(of, virtio_mmio_match);
++
++static const struct acpi_device_id virtio_mmio_acpi_match[] = {
++ { "LNRO0005", },
++ { }
++};
++MODULE_DEVICE_TABLE(acpi, virtio_mmio_acpi_match);
++
++ASWG
++----
++
++The following areas are not yet well defined for ARM in the current ACPI
++specification and are expected to be worked through in the UEFI ACPI
++Specification Working Group (ASWG) <http://www.uefi.org/workinggroups>.
++Participation in this group is open to all UEFI members.
++
++ - ACPI based CPU topology
++ - ACPI based Power management
++ - CPU idle control based on PSCI
++ - CPU performance control (CPPC)
++ - ACPI based SMMU
++ - ITS support for GIC in MADT
++
++No code shall be accepted into the kernel unless it complies with the released
++standards from UEFI ASWG. If there are features missing from ACPI to make it
++function on a platform, ECRs should be submitted to ASWG and go through the
++approval process.
diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt
new file mode 100644
-index 0000000..e19fdb8
+index 0000000..1070b06
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xgene-pci.txt
-@@ -0,0 +1,52 @@
+@@ -0,0 +1,57 @@
+* AppliedMicro X-Gene PCIe interface
+
+Required properties:
@@ -60,10 +347,12 @@ index 0000000..e19fdb8
+
+Optional properties:
+- status: Either "ok" or "disabled".
++- dma-coherent: Present if dma operations are coherent
+
+Example:
+
+SoC specific DT Entry:
++
+ pcie0: pcie@1f2b0000 {
+ status = "disabled";
+ device_type = "pci";
@@ -72,28 +361,52 @@ index 0000000..e19fdb8
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */
-+ 0xe0 0xd0000000 0x0 0x00200000>; /* PCI config space */
++ 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
-+ ranges = <0x01000000 0x00 0x00000000 0xe0 0x00000000 0x00 0x00010000 /* io */
-+ 0x02000000 0x00 0x10000000 0xe0 0x10000000 0x00 0x80000000>; /* mem */
-+ dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>;
++ ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */
++ 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
++ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
++ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
++ dma-coherent;
+ clocks = <&pcie0clk 0>;
+ };
+
++
+Board specific DT Entry:
+ &pcie0 {
+ status = "ok";
+ };
+diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
+index 10d51c2..9464c6d 100644
+--- a/Documentation/kernel-parameters.txt
++++ b/Documentation/kernel-parameters.txt
+@@ -165,7 +165,7 @@ multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30
+ bytes respectively. Such letter suffixes can also be entirely omitted.
+
+
+- acpi= [HW,ACPI,X86]
++ acpi= [HW,ACPI,X86,ARM]
+ Advanced Configuration and Power Interface
+ Format: { force | off | strict | noirq | rsdt }
+ force -- enable ACPI if default was off
+@@ -175,6 +175,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
+ strictly ACPI specification compliant.
+ rsdt -- prefer RSDT over (default) XSDT
+ copy_dsdt -- copy DSDT to memory
++ For ARM64, ONLY "acpi=off" is available.
+
+ See also Documentation/power/runtime_pm.txt, pci=noacpi
+
diff --git a/MAINTAINERS b/MAINTAINERS
-index 2f85f55..8980971 100644
+index 670b3dc..b18bc49 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
-@@ -6894,6 +6894,13 @@ L: linux-pci@vger.kernel.org
+@@ -6942,6 +6942,14 @@ L: linux-pci@vger.kernel.org
S: Maintained
F: drivers/pci/host/*spear*
@@ -102,16 +415,202 @@ index 2f85f55..8980971 100644
+L: linux-pci@vger.kernel.org
+L: linux-arm-kernel@lists.infradead.org
+S: Maintained
++F: Documentation/devicetree/bindings/pci/xgene-pci.txt
+F: drivers/pci/host/pci-xgene.c
+
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: linux-pcmcia@lists.infradead.org
+diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
+index 3d23418..22b7529 100644
+--- a/arch/arm/include/asm/io.h
++++ b/arch/arm/include/asm/io.h
+@@ -178,6 +178,7 @@ static inline void __iomem *__typesafe_io(unsigned long addr)
+
+ /* PCI fixed i/o mapping */
+ #define PCI_IO_VIRT_BASE 0xfee00000
++#define PCI_IOBASE PCI_IO_VIRT_BASE
+
+ #if defined(CONFIG_PCI)
+ void pci_ioremap_set_mem_type(int mem_type);
+diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h
+index 5cc0b0f..03a08bb 100644
+--- a/arch/arm/include/asm/kvm_mmu.h
++++ b/arch/arm/include/asm/kvm_mmu.h
+@@ -21,6 +21,7 @@
+
+ #include <asm/memory.h>
+ #include <asm/page.h>
++#include <asm/kvm_arm.h>
+
+ /*
+ * We directly use the kernel VA for the HYP, as we can directly share
+@@ -178,6 +179,18 @@ static inline void coherent_cache_guest_page(struct kvm_vcpu *vcpu, hva_t hva,
+
+ void stage2_flush_vm(struct kvm *kvm);
+
++static inline int kvm_get_phys_addr_shift(void)
++{
++ return KVM_PHYS_SHIFT;
++}
++
++
++static inline u32 get_vttbr_baddr_mask(void)
++{
++ return VTTBR_BADDR_MASK;
++}
++
++
+ #endif /* !__ASSEMBLY__ */
+
+ #endif /* __ARM_KVM_MMU_H__ */
+diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
+index a99e0cd..d0fca8f 100644
+--- a/arch/arm/kvm/arm.c
++++ b/arch/arm/kvm/arm.c
+@@ -37,6 +37,7 @@
+ #include <asm/mman.h>
+ #include <asm/tlbflush.h>
+ #include <asm/cacheflush.h>
++#include <asm/cputype.h>
+ #include <asm/virt.h>
+ #include <asm/kvm_arm.h>
+ #include <asm/kvm_asm.h>
+@@ -61,6 +62,12 @@ static atomic64_t kvm_vmid_gen = ATOMIC64_INIT(1);
+ static u8 kvm_next_vmid;
+ static DEFINE_SPINLOCK(kvm_vmid_lock);
+
++#ifdef CONFIG_ARM64
++static u64 vttbr_baddr_mask;
++#else
++static u32 vttbr_baddr_mask;
++#endif
++
+ static bool vgic_present;
+
+ static void kvm_arm_set_running_vcpu(struct kvm_vcpu *vcpu)
+@@ -429,8 +436,14 @@ static void update_vttbr(struct kvm *kvm)
+ /* update vttbr to be used with the new vmid */
+ pgd_phys = virt_to_phys(kvm->arch.pgd);
+ vmid = ((u64)(kvm->arch.vmid) << VTTBR_VMID_SHIFT) & VTTBR_VMID_MASK;
+- kvm->arch.vttbr = pgd_phys & VTTBR_BADDR_MASK;
+- kvm->arch.vttbr |= vmid;
++
++ /*
++ * If the VTTBR isn't aligned there is something wrong with the system
++ * or kernel.
++ */
++ BUG_ON(pgd_phys & ~vttbr_baddr_mask);
++
++ kvm->arch.vttbr = pgd_phys | vmid;
+
+ spin_unlock(&kvm_vmid_lock);
+ }
+@@ -1015,6 +1028,12 @@ int kvm_arch_init(void *opaque)
+ }
+ }
+
++ vttbr_baddr_mask = get_vttbr_baddr_mask();
++ if (vttbr_baddr_mask == ~0) {
++ kvm_err("Cannot set vttbr_baddr_mask\n");
++ return -EINVAL;
++ }
++
+ cpu_notifier_register_begin();
+
+ err = init_hyp_mode();
+diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
+index 05e1f73..c186a17 100644
+--- a/arch/arm/mach-integrator/pci_v3.c
++++ b/arch/arm/mach-integrator/pci_v3.c
+@@ -660,6 +660,7 @@ static void __init pci_v3_preinit(void)
+ {
+ unsigned long flags;
+ unsigned int temp;
++ phys_addr_t io_address = pci_pio_to_address(io_mem.start);
+
+ pcibios_min_mem = 0x00100000;
+
+@@ -701,7 +702,7 @@ static void __init pci_v3_preinit(void)
+ /*
+ * Setup window 2 - PCI IO
+ */
+- v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_mem.start) |
++ v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_address) |
+ V3_LB_BASE_ENABLE);
+ v3_writew(V3_LB_MAP2, v3_addr_to_lb_map2(0));
+
+@@ -742,6 +743,7 @@ static void __init pci_v3_preinit(void)
+ static void __init pci_v3_postinit(void)
+ {
+ unsigned int pci_cmd;
++ phys_addr_t io_address = pci_pio_to_address(io_mem.start);
+
+ pci_cmd = PCI_COMMAND_MEMORY |
+ PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
+@@ -758,7 +760,7 @@ static void __init pci_v3_postinit(void)
+ "interrupt: %d\n", ret);
+ #endif
+
+- register_isa_ports(non_mem.start, io_mem.start, 0);
++ register_isa_ports(non_mem.start, io_address, 0);
+ }
+
+ /*
+@@ -867,33 +869,32 @@ static int __init pci_v3_probe(struct platform_device *pdev)
+
+ for_each_of_pci_range(&parser, &range) {
+ if (!range.flags) {
+- of_pci_range_to_resource(&range, np, &conf_mem);
++ ret = of_pci_range_to_resource(&range, np, &conf_mem);
+ conf_mem.name = "PCIv3 config";
+ }
+ if (range.flags & IORESOURCE_IO) {
+- of_pci_range_to_resource(&range, np, &io_mem);
++ ret = of_pci_range_to_resource(&range, np, &io_mem);
+ io_mem.name = "PCIv3 I/O";
+ }
+ if ((range.flags & IORESOURCE_MEM) &&
+ !(range.flags & IORESOURCE_PREFETCH)) {
+ non_mem_pci = range.pci_addr;
+ non_mem_pci_sz = range.size;
+- of_pci_range_to_resource(&range, np, &non_mem);
++ ret = of_pci_range_to_resource(&range, np, &non_mem);
+ non_mem.name = "PCIv3 non-prefetched mem";
+ }
+ if ((range.flags & IORESOURCE_MEM) &&
+ (range.flags & IORESOURCE_PREFETCH)) {
+ pre_mem_pci = range.pci_addr;
+ pre_mem_pci_sz = range.size;
+- of_pci_range_to_resource(&range, np, &pre_mem);
++ ret = of_pci_range_to_resource(&range, np, &pre_mem);
+ pre_mem.name = "PCIv3 prefetched mem";
+ }
+- }
+
+- if (!conf_mem.start || !io_mem.start ||
+- !non_mem.start || !pre_mem.start) {
+- dev_err(&pdev->dev, "missing ranges in device node\n");
+- return -EINVAL;
++ if (ret < 0) {
++ dev_err(&pdev->dev, "missing ranges in device node\n");
++ return ret;
++ }
+ }
+
+ pci_v3.map_irq = of_irq_parse_and_map_pci;
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
-index fd4e81a..e8559bb 100644
+index fd4e81a..e57b91a 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
-@@ -81,7 +81,7 @@ config MMU
+@@ -1,5 +1,6 @@
+ config ARM64
+ def_bool y
++ select ACPI_REDUCED_HARDWARE_ONLY if ACPI
+ select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+ select ARCH_HAS_SG_CHAIN
+ select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
+@@ -81,7 +82,7 @@ config MMU
def_bool y
config NO_IOPORT_MAP
@@ -120,20 +619,23 @@ index fd4e81a..e8559bb 100644
config STACKTRACE_SUPPORT
def_bool y
-@@ -156,6 +156,23 @@ menu "Bus support"
+@@ -156,6 +157,26 @@ menu "Bus support"
config ARM_AMBA
bool
+config PCI
+ bool "PCI support"
+ help
-+ This feature enables support for PCIe bus system. If you say Y
++ This feature enables support for PCI bus system. If you say Y
+ here, the kernel will include drivers and infrastructure code
-+ to support PCIe bus devices.
++ to support PCI bus devices.
+
+config PCI_DOMAINS
+ def_bool PCI
+
++config PCI_DOMAINS_GENERIC
++ def_bool PCI
++
+config PCI_SYSCALL
+ def_bool PCI
+
@@ -144,15 +646,45 @@ index fd4e81a..e8559bb 100644
endmenu
menu "Kernel Features"
+@@ -235,6 +256,9 @@ config SMP
+
+ If you don't know what to do here, say N.
+
++config ARM_PARKING_PROTOCOL
++ def_bool y if SMP
++
+ config SCHED_MC
+ bool "Multi-core scheduler support"
+ depends on SMP
+@@ -421,6 +445,8 @@ source "drivers/Kconfig"
+
+ source "drivers/firmware/Kconfig"
+
++source "drivers/acpi/Kconfig"
++
+ source "fs/Kconfig"
+
+ source "arch/arm64/kvm/Kconfig"
+diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
+index 2df5e5d..bddd4e3 100644
+--- a/arch/arm64/Makefile
++++ b/arch/arm64/Makefile
+@@ -50,6 +50,7 @@ core-y += arch/arm64/kernel/ arch/arm64/mm/
+ core-$(CONFIG_KVM) += arch/arm64/kvm/
+ core-$(CONFIG_XEN) += arch/arm64/xen/
+ core-$(CONFIG_CRYPTO) += arch/arm64/crypto/
++drivers-$(CONFIG_PCI) += arch/arm64/pci/
+ libs-y := arch/arm64/lib/ $(libs-y)
+ libs-y += $(LIBGCC)
+ libs-$(CONFIG_EFI_STUB) += drivers/firmware/efi/libstub/
diff --git a/arch/arm64/boot/dts/apm-mustang.dts b/arch/arm64/boot/dts/apm-mustang.dts
-index b2f5622..0cb67fc 100644
+index b2f5622..f649000 100644
--- a/arch/arm64/boot/dts/apm-mustang.dts
+++ b/arch/arm64/boot/dts/apm-mustang.dts
-@@ -32,3 +32,11 @@
- &menet {
- status = "ok";
+@@ -25,6 +25,14 @@
+ };
};
-+
+
+&pcie0clk {
+ status = "ok";
+};
@@ -160,88 +692,15 @@ index b2f5622..0cb67fc 100644
+&pcie0 {
+ status = "ok";
+};
++
+ &serial0 {
+ status = "ok";
+ };
diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi
-index c0aceef..fb2ee54 100644
+index c0aceef..403197a 100644
--- a/arch/arm64/boot/dts/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm-storm.dtsi
-@@ -24,56 +24,56 @@
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x000>;
- enable-method = "spin-table";
-- cpu-release-addr = <0x1 0x0000fff8>;
-+ cpu-release-addr = <0x40 0x0000f000>;
- };
- cpu@001 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x001>;
- enable-method = "spin-table";
-- cpu-release-addr = <0x1 0x0000fff8>;
-+ cpu-release-addr = <0x40 0x0000f000>;
- };
- cpu@100 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x100>;
- enable-method = "spin-table";
-- cpu-release-addr = <0x1 0x0000fff8>;
-+ cpu-release-addr = <0x40 0x0000f000>;
- };
- cpu@101 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x101>;
- enable-method = "spin-table";
-- cpu-release-addr = <0x1 0x0000fff8>;
-+ cpu-release-addr = <0x40 0x0000f000>;
- };
- cpu@200 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x200>;
- enable-method = "spin-table";
-- cpu-release-addr = <0x1 0x0000fff8>;
-+ cpu-release-addr = <0x40 0x0000f000>;
- };
- cpu@201 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x201>;
- enable-method = "spin-table";
-- cpu-release-addr = <0x1 0x0000fff8>;
-+ cpu-release-addr = <0x40 0x0000f000>;
- };
- cpu@300 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x300>;
- enable-method = "spin-table";
-- cpu-release-addr = <0x1 0x0000fff8>;
-+ cpu-release-addr = <0x40 0x0000f000>;
- };
- cpu@301 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x301>;
- enable-method = "spin-table";
-- cpu-release-addr = <0x1 0x0000fff8>;
-+ cpu-release-addr = <0x40 0x0000f000>;
- };
- };
-
-@@ -97,6 +97,11 @@
- clock-frequency = <50000000>;
- };
-
-+ pmu {
-+ compatible = "arm,armv8-pmuv3";
-+ interrupts = <1 12 0xff04>;
-+ };
-+
- soc {
- compatible = "simple-bus";
- #address-cells = <2>;
-@@ -269,6 +274,161 @@
+@@ -269,6 +269,171 @@
enable-mask = <0x2>;
clock-output-names = "rtcclk";
};
@@ -305,16 +764,18 @@ index c0aceef..fb2ee54 100644
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */
-+ 0xe0 0xd0000000 0x0 0x00200000>; /* PCI config space */
++ 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
-+ ranges = <0x01000000 0x00 0x00000000 0xe0 0x00000000 0x00 0x00010000 /* io */
-+ 0x02000000 0x00 0x10000000 0xe0 0x10000000 0x00 0x80000000>; /* mem */
-+ dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>;
++ ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */
++ 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
++ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
++ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
++ dma-coherent;
+ clocks = <&pcie0clk 0>;
+ };
+
@@ -326,16 +787,18 @@ index c0aceef..fb2ee54 100644
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f2c0000 0x0 0x00010000 /* Controller registers */
-+ 0xd0 0xd0000000 0x0 0x00200000>; /* PCI config space */
++ 0xd0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
-+ ranges = <0x01000000 0x0 0x00000000 0xd0 0x00000000 0x00 0x00010000 /* io */
-+ 0x02000000 0x0 0x10000000 0xd0 0x10000000 0x00 0x80000000>; /* mem */
-+ dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>;
++ ranges = <0x01000000 0x0 0x00000000 0xd0 0x10000000 0x00 0x00010000 /* io */
++ 0x02000000 0x0 0x80000000 0xd1 0x80000000 0x00 0x80000000>; /* mem */
++ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
++ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x1>;
++ dma-coherent;
+ clocks = <&pcie1clk 0>;
+ };
+
@@ -347,16 +810,18 @@ index c0aceef..fb2ee54 100644
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f2d0000 0x0 0x00010000 /* Controller registers */
-+ 0x90 0xd0000000 0x0 0x00200000>; /* PCI config space */
++ 0x90 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
-+ ranges = <0x01000000 0x0 0x00000000 0x90 0x00000000 0x0 0x00010000 /* io */
-+ 0x02000000 0x0 0x10000000 0x90 0x10000000 0x0 0x80000000>; /* mem */
-+ dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>;
++ ranges = <0x01000000 0x0 0x00000000 0x90 0x10000000 0x0 0x00010000 /* io */
++ 0x02000000 0x0 0x80000000 0x91 0x80000000 0x0 0x80000000>; /* mem */
++ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
++ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x1>;
++ dma-coherent;
+ clocks = <&pcie2clk 0>;
+ };
+
@@ -368,16 +833,18 @@ index c0aceef..fb2ee54 100644
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f500000 0x0 0x00010000 /* Controller registers */
-+ 0xa0 0xd0000000 0x0 0x00200000>; /* PCI config space */
++ 0xa0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
-+ ranges = <0x01000000 0x0 0x00000000 0xa0 0x00000000 0x0 0x00010000 /* io */
-+ 0x02000000 0x0 0x10000000 0xa0 0x10000000 0x0 0x80000000>; /* mem */
-+ dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>;
++ ranges = <0x01000000 0x0 0x00000000 0xa0 0x10000000 0x0 0x00010000 /* io */
++ 0x02000000 0x0 0x80000000 0xa1 0x80000000 0x0 0x80000000>; /* mem */
++ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
++ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x1>;
++ dma-coherent;
+ clocks = <&pcie3clk 0>;
+ };
+
@@ -391,36 +858,20 @@ index c0aceef..fb2ee54 100644
+ reg = < 0x00 0x1f510000 0x0 0x00010000 /* Controller registers */
+ 0xc0 0xd0000000 0x0 0x00200000>; /* PCI config space */
+ reg-names = "csr", "cfg";
-+ ranges = <0x01000000 0x0 0x00000000 0xc0 0x00000000 0x0 0x00010000 /* io */
-+ 0x02000000 0x0 0x10000000 0xc0 0x10000000 0x0 0x80000000>; /* mem */
-+ dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>;
++ ranges = <0x01000000 0x0 0x00000000 0xc0 0x10000000 0x0 0x00010000 /* io */
++ 0x02000000 0x0 0x80000000 0xc1 0x80000000 0x0 0x80000000>; /* mem */
++ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
++ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x1>;
++ dma-coherent;
+ clocks = <&pcie4clk 0>;
};
serial0: serial@1c020000 {
-@@ -277,7 +437,7 @@
- compatible = "ns16550a";
- reg = <0 0x1c020000 0x0 0x1000>;
- reg-shift = <2>;
-- clock-frequency = <10000000>; /* Updated by bootloader */
-+ clock-frequency = <50000000>; /* Updated by bootloader */
- interrupt-parent = <&gic>;
- interrupts = <0x0 0x4c 0x4>;
- };
-@@ -407,7 +567,7 @@
- interrupts = <0x0 0x3c 0x4>;
- dma-coherent;
- clocks = <&menetclk 0>;
-- local-mac-address = [00 01 73 00 00 01];
-+ local-mac-address = [00 00 00 00 00 00];
- phy-connection-type = "rgmii";
- phy-handle = <&menetphy>;
- mdio {
diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild
index 0b3fcf8..07cb417 100644
--- a/arch/arm64/include/asm/Kbuild
@@ -433,6 +884,147 @@ index 0b3fcf8..07cb417 100644
generic-y += poll.h
generic-y += preempt.h
generic-y += resource.h
+diff --git a/arch/arm64/include/asm/acenv.h b/arch/arm64/include/asm/acenv.h
+new file mode 100644
+index 0000000..b49166f
+--- /dev/null
++++ b/arch/arm64/include/asm/acenv.h
+@@ -0,0 +1,18 @@
++/*
++ * ARM64 specific ACPICA environments and implementation
++ *
++ * Copyright (C) 2014, Linaro Ltd.
++ * Author: Hanjun Guo <hanjun.guo@linaro.org>
++ * Author: Graeme Gregory <graeme.gregory@linaro.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef _ASM_ACENV_H
++#define _ASM_ACENV_H
++
++/* It is required unconditionally by ACPI core, update it when needed. */
++
++#endif /* _ASM_ACENV_H */
+diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
+new file mode 100644
+index 0000000..7f6cd91
+--- /dev/null
++++ b/arch/arm64/include/asm/acpi.h
+@@ -0,0 +1,99 @@
++/*
++ * Copyright (C) 2013-2014, Linaro Ltd.
++ * Author: Al Stone <al.stone@linaro.org>
++ * Author: Graeme Gregory <graeme.gregory@linaro.org>
++ * Author: Hanjun Guo <hanjun.guo@linaro.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation;
++ */
++
++#ifndef _ASM_ACPI_H
++#define _ASM_ACPI_H
++
++#include <asm/smp_plat.h>
++
++/* Basic configuration for ACPI */
++#ifdef CONFIG_ACPI
++#define acpi_strict 1 /* No out-of-spec workarounds on ARM64 */
++extern int acpi_disabled;
++extern int acpi_noirq;
++extern int acpi_pci_disabled;
++
++/* 1 to indicate PSCI 0.2+ is implemented */
++static inline bool acpi_psci_present(void)
++{
++ return acpi_gbl_FADT.arm_boot_flags & ACPI_FADT_PSCI_COMPLIANT;
++}
++
++/* 1 to indicate HVC must be used instead of SMC as the PSCI conduit */
++static inline bool acpi_psci_use_hvc(void)
++{
++ return acpi_gbl_FADT.arm_boot_flags & ACPI_FADT_PSCI_USE_HVC;
++}
++
++static inline void disable_acpi(void)
++{
++ acpi_disabled = 1;
++ acpi_pci_disabled = 1;
++ acpi_noirq = 1;
++}
++
++/* MPIDR value provided in GICC structure is 64 bits, but
++ * the acpi processor driver use the 32 bits cpu hardware
++ * ID (apic_id on intel platform) everywhere, it is pretty
++ * hard to modify the acpi processor driver to accept the
++ * 64 bits MPIDR value, at the same time, only 32 bits of
++ * the MPIDR is used in the 64 bits MPIDR, just pack the
++ * Affx fields into a single 32 bit identifier to accommodate
++ * the acpi processor drivers.
++ */
++static inline u32 pack_mpidr_into_32_bits(u64 mpidr)
++{
++ /*
++ * Bits [0:7] Aff0;
++ * Bits [8:15] Aff1;
++ * Bits [16:23] Aff2;
++ * Bits [32:39] Aff3;
++ */
++ return (u32) ((mpidr & 0xff00000000) >> 8) | mpidr;
++}
++
++/*
++ * The ACPI processor driver for ACPI core code needs this macro
++ * to find out this cpu was already mapped (mapping from CPU hardware
++ * ID to CPU logical ID) or not.
++ *
++ * cpu_logical_map(cpu) is the mapping of MPIDR and the logical cpu,
++ * and MPIDR is the cpu hardware ID we needed to pack.
++ */
++#define cpu_physical_id(cpu) pack_mpidr_into_32_bits(cpu_logical_map(cpu))
++
++/*
++ * It's used from ACPI core in kdump to boot UP system with SMP kernel,
++ * with this check the ACPI core will not override the CPU index
++ * obtained from GICC with 0 and not print some error message as well.
++ * Since MADT must provide at least one GICC structure for GIC
++ * initialization, CPU will be always available in MADT on ARM64.
++ */
++static inline bool acpi_has_cpu_in_madt(void)
++{
++ return true;
++}
++
++static inline void arch_fix_phys_package_id(int num, u32 slot) { }
++void __init acpi_smp_init_cpus(void);
++
++extern int acpi_get_cpu_parked_address(int cpu, u64 *addr);
++
++#else
++
++static inline bool acpi_psci_present(void) { return false; }
++static inline bool acpi_psci_use_hvc(void) { return false; }
++static inline void acpi_smp_init_cpus(void) { }
++static inline int acpi_get_cpu_parked_address(int cpu, u64 *addr) { return -EOPNOTSUPP; }
++
++#endif /* CONFIG_ACPI */
++
++#endif /*_ASM_ACPI_H*/
+diff --git a/arch/arm64/include/asm/cpu_ops.h b/arch/arm64/include/asm/cpu_ops.h
+index d7b4b38..d149580 100644
+--- a/arch/arm64/include/asm/cpu_ops.h
++++ b/arch/arm64/include/asm/cpu_ops.h
+@@ -61,6 +61,7 @@ struct cpu_operations {
+ };
+
+ extern const struct cpu_operations *cpu_ops[NR_CPUS];
++const struct cpu_operations *cpu_get_ops(const char *name);
+ extern int __init cpu_read_ops(struct device_node *dn, int cpu);
+ extern void __init cpu_read_bootcpu_ops(void);
+
diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h
index 01d3aab..8186df6 100644
--- a/arch/arm64/include/asm/elf.h
@@ -448,7 +1040,7 @@ index 01d3aab..8186df6 100644
#define CORE_DUMP_USE_REGSET
#define ELF_EXEC_PAGESIZE PAGE_SIZE
diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
-index e0ecdcf..dc34039 100644
+index e0ecdcf..f998d90 100644
--- a/arch/arm64/include/asm/io.h
+++ b/arch/arm64/include/asm/io.h
@@ -121,7 +121,8 @@ static inline u64 __raw_readq(const volatile void __iomem *addr)
@@ -457,16 +1049,162 @@ index e0ecdcf..dc34039 100644
*/
-#define IO_SPACE_LIMIT 0xffff
+#define arch_has_dev_port() (1)
-+#define IO_SPACE_LIMIT 0x1ffffff
++#define IO_SPACE_LIMIT (SZ_32M - 1)
#define PCI_IOBASE ((void __iomem *)(MODULES_VADDR - SZ_32M))
static inline u8 inb(unsigned long addr)
+diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
+index cc83520..ff4a4fa 100644
+--- a/arch/arm64/include/asm/kvm_arm.h
++++ b/arch/arm64/include/asm/kvm_arm.h
+@@ -95,7 +95,6 @@
+ /* TCR_EL2 Registers bits */
+ #define TCR_EL2_TBI (1 << 20)
+ #define TCR_EL2_PS (7 << 16)
+-#define TCR_EL2_PS_40B (2 << 16)
+ #define TCR_EL2_TG0 (1 << 14)
+ #define TCR_EL2_SH0 (3 << 12)
+ #define TCR_EL2_ORGN0 (3 << 10)
+@@ -104,8 +103,6 @@
+ #define TCR_EL2_MASK (TCR_EL2_TG0 | TCR_EL2_SH0 | \
+ TCR_EL2_ORGN0 | TCR_EL2_IRGN0 | TCR_EL2_T0SZ)
+
+-#define TCR_EL2_FLAGS (TCR_EL2_PS_40B)
+-
+ /* VTCR_EL2 Registers bits */
+ #define VTCR_EL2_PS_MASK (7 << 16)
+ #define VTCR_EL2_TG0_MASK (1 << 14)
+@@ -120,36 +117,28 @@
+ #define VTCR_EL2_SL0_MASK (3 << 6)
+ #define VTCR_EL2_SL0_LVL1 (1 << 6)
+ #define VTCR_EL2_T0SZ_MASK 0x3f
+-#define VTCR_EL2_T0SZ_40B 24
++#define VTCR_EL2_T0SZ(bits) (64 - (bits))
+
+ #ifdef CONFIG_ARM64_64K_PAGES
+ /*
+ * Stage2 translation configuration:
+- * 40bits output (PS = 2)
+- * 40bits input (T0SZ = 24)
+ * 64kB pages (TG0 = 1)
+ * 2 level page tables (SL = 1)
+ */
+ #define VTCR_EL2_FLAGS (VTCR_EL2_TG0_64K | VTCR_EL2_SH0_INNER | \
+ VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \
+- VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B)
+-#define VTTBR_X (38 - VTCR_EL2_T0SZ_40B)
++ VTCR_EL2_SL0_LVL1)
+ #else
+ /*
+ * Stage2 translation configuration:
+- * 40bits output (PS = 2)
+- * 40bits input (T0SZ = 24)
+ * 4kB pages (TG0 = 0)
+ * 3 level page tables (SL = 1)
+ */
+ #define VTCR_EL2_FLAGS (VTCR_EL2_TG0_4K | VTCR_EL2_SH0_INNER | \
+ VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \
+- VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B)
+-#define VTTBR_X (37 - VTCR_EL2_T0SZ_40B)
++ VTCR_EL2_SL0_LVL1)
+ #endif
+
+-#define VTTBR_BADDR_SHIFT (VTTBR_X - 1)
+-#define VTTBR_BADDR_MASK (((1LLU << (40 - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT)
+ #define VTTBR_VMID_SHIFT (48LLU)
+ #define VTTBR_VMID_MASK (0xffLLU << VTTBR_VMID_SHIFT)
+
+diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
+index 8e138c7..1c70b2f 100644
+--- a/arch/arm64/include/asm/kvm_mmu.h
++++ b/arch/arm64/include/asm/kvm_mmu.h
+@@ -167,5 +167,80 @@ static inline void coherent_cache_guest_page(struct kvm_vcpu *vcpu, hva_t hva,
+
+ void stage2_flush_vm(struct kvm *kvm);
+
++/*
++ * ARMv8 64K architecture limitations:
++ * 16 <= T0SZ <= 21 is valid under 3 level of translation tables
++ * 18 <= T0SZ <= 34 is valid under 2 level of translation tables
++ * 31 <= T0SZ <= 39 is valid under 1 level of transltaion tables
++ *
++ * ARMv8 4K architecture limitations:
++ * 16 <= T0SZ <= 24 is valid under 4 level of translation tables
++ * 21 <= T0SZ <= 33 is valid under 3 level of translation tables
++ * 30 <= T0SZ <= 39 is valid under 2 level of translation tables
++ *
++ * For 4K pages we only support 3 or 4 level, giving T0SZ a range of 16 to 33.
++ * For 64K pages we only support 2 or 3 level, giving T0SZ a range of 16 to 34.
++ *
++ * See Table D4-23 and Table D4-25 in ARM DDI 0487A.b to figure out
++ * the origin of the hardcoded values, 38 and 37.
++ */
++
++#ifdef CONFIG_ARM64_64K_PAGES
++static inline int t0sz_to_vttbr_x(int t0sz)
++{
++ if (t0sz < 16 || t0sz > 34) {
++ kvm_err("Cannot support %d-bit address space\n", 64 - t0sz);
++ return -EINVAL;
++ }
++
++ return 38 - t0sz;
++}
++#else /* 4K pages */
++static inline int t0sz_to_vttbr_x(int t0sz)
++{
++ if (t0sz < 16 || t0sz > 33) {
++ kvm_err("Cannot support %d-bit address space\n", 64 - t0sz);
++ return -EINVAL;
++ }
++ return 37 - t0sz;
++}
++#endif
++static inline int kvm_get_phys_addr_shift(void)
++{
++ int pa_range = read_cpuid(ID_AA64MMFR0_EL1) & 0xf;
++
++ switch (pa_range) {
++ case 0: return 32;
++ case 1: return 36;
++ case 2: return 40;
++ case 3: return 42;
++ case 4: return 44;
++ case 5: return 48;
++ default:
++ BUG();
++ return 0;
++ }
++}
++
++/**
++ * get_vttbr_baddr_mask - get mask value for vttbr base address
++ *
++ * In ARMv8, vttbr_baddr_mask cannot be determined in compile time since the
++ * stage2 input address size depends on hardware capability. Thus, we first
++ * need to read ID_AA64MMFR0_EL1.PARange and then set vttbr_baddr_mask with
++ * consideration of both the granule size and the level of translation tables.
++ */
++static inline u64 get_vttbr_baddr_mask(void)
++{
++ int t0sz, vttbr_x;
++
++ t0sz = VTCR_EL2_T0SZ(kvm_get_phys_addr_shift());
++ vttbr_x = t0sz_to_vttbr_x(t0sz);
++ if (vttbr_x < 0)
++ return ~0;
++ return GENMASK_ULL(48, (vttbr_x - 1));
++
++}
++
+ #endif /* __ASSEMBLY__ */
+ #endif /* __ARM64_KVM_MMU_H__ */
diff --git a/arch/arm64/include/asm/pci.h b/arch/arm64/include/asm/pci.h
new file mode 100644
-index 0000000..3f7856e
+index 0000000..872ba93
--- /dev/null
+++ b/arch/arm64/include/asm/pci.h
-@@ -0,0 +1,49 @@
+@@ -0,0 +1,37 @@
+#ifndef __ASM_PCI_H
+#define __ASM_PCI_H
+#ifdef __KERNEL__
@@ -482,8 +1220,6 @@ index 0000000..3f7856e
+#define PCIBIOS_MIN_IO 0x1000
+#define PCIBIOS_MIN_MEM 0
+
-+struct pci_host_bridge *find_pci_host_bridge(struct pci_bus *bus);
-+
+/*
+ * Set to 1 if the kernel should re-assign all PCI bus numbers
+ */
@@ -498,16 +1234,6 @@ index 0000000..3f7856e
+extern int isa_dma_bridge_buggy;
+
+#ifdef CONFIG_PCI
-+static inline int pci_domain_nr(struct pci_bus *bus)
-+{
-+ struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
-+
-+ if (bridge)
-+ return bridge->domain_nr;
-+
-+ return 0;
-+}
-+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+ return 1;
@@ -516,18 +1242,517 @@ index 0000000..3f7856e
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_PCI_H */
+diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
+index ffe1ba0..a968523 100644
+--- a/arch/arm64/include/asm/pgtable.h
++++ b/arch/arm64/include/asm/pgtable.h
+@@ -296,6 +296,8 @@ static inline int has_transparent_hugepage(void)
+ __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRnE) | PTE_PXN | PTE_UXN)
+ #define pgprot_writecombine(prot) \
+ __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC) | PTE_PXN | PTE_UXN)
++#define pgprot_device(prot) \
++ __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRE) | PTE_PXN | PTE_UXN)
+ #define __HAVE_PHYS_MEM_ACCESS_PROT
+ struct file;
+ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+diff --git a/arch/arm64/include/asm/psci.h b/arch/arm64/include/asm/psci.h
+index e5312ea..2454bc5 100644
+--- a/arch/arm64/include/asm/psci.h
++++ b/arch/arm64/include/asm/psci.h
+@@ -14,6 +14,7 @@
+ #ifndef __ASM_PSCI_H
+ #define __ASM_PSCI_H
+
+-int psci_init(void);
++int psci_dt_init(void);
++int psci_acpi_init(void);
+
+ #endif /* __ASM_PSCI_H */
+diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h
+index a498f2c..2ebbd55 100644
+--- a/arch/arm64/include/asm/smp.h
++++ b/arch/arm64/include/asm/smp.h
+@@ -39,9 +39,10 @@ extern void show_ipi_list(struct seq_file *p, int prec);
+ extern void handle_IPI(int ipinr, struct pt_regs *regs);
+
+ /*
+- * Setup the set of possible CPUs (via set_cpu_possible)
++ * Discover the set of possible CPUs and determine their
++ * SMP operations.
+ */
+-extern void smp_init_cpus(void);
++extern void of_smp_init_cpus(void);
+
+ /*
+ * Provide a function to raise an IPI cross call on CPUs in callmap.
+@@ -49,6 +50,11 @@ extern void smp_init_cpus(void);
+ extern void set_smp_cross_call(void (*)(const struct cpumask *, unsigned int));
+
+ /*
++ * Provide a function to signal a parked secondary CPU.
++ */
++extern void set_smp_boot_wakeup_call(void (*)(int cpu));
++
++/*
+ * Called from the secondary holding pen, this is the secondary CPU entry point.
+ */
+ asmlinkage void secondary_start_kernel(void);
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
-index df7ef87..1ed5a06 100644
+index df7ef87..b0bad2e 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
-@@ -29,6 +29,7 @@ arm64-obj-$(CONFIG_ARM64_CPU_SUSPEND) += sleep.o suspend.o
+@@ -21,7 +21,8 @@ arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \
+ sys_compat.o
+ arm64-obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o entry-ftrace.o
+ arm64-obj-$(CONFIG_MODULES) += arm64ksyms.o module.o
+-arm64-obj-$(CONFIG_SMP) += smp.o smp_spin_table.o topology.o
++arm64-obj-$(CONFIG_SMP) += smp.o smp_spin_table.o topology.o \
++ smp_parking_protocol.o
+ arm64-obj-$(CONFIG_PERF_EVENTS) += perf_regs.o
+ arm64-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o
+ arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
+@@ -29,6 +30,8 @@ arm64-obj-$(CONFIG_ARM64_CPU_SUSPEND) += sleep.o suspend.o
arm64-obj-$(CONFIG_JUMP_LABEL) += jump_label.o
arm64-obj-$(CONFIG_KGDB) += kgdb.o
arm64-obj-$(CONFIG_EFI) += efi.o efi-stub.o efi-entry.o
+arm64-obj-$(CONFIG_PCI) += pci.o
++arm64-obj-$(CONFIG_ACPI) += acpi.o
obj-y += $(arm64-obj-y) vdso/
obj-m += $(arm64-obj-m)
+diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
+new file mode 100644
+index 0000000..5486426
+--- /dev/null
++++ b/arch/arm64/kernel/acpi.c
+@@ -0,0 +1,397 @@
++/*
++ * ARM64 Specific Low-Level ACPI Boot Support
++ *
++ * Copyright (C) 2013-2014, Linaro Ltd.
++ * Author: Al Stone <al.stone@linaro.org>
++ * Author: Graeme Gregory <graeme.gregory@linaro.org>
++ * Author: Hanjun Guo <hanjun.guo@linaro.org>
++ * Author: Tomasz Nowicki <tomasz.nowicki@linaro.org>
++ * Author: Naresh Bhat <naresh.bhat@linaro.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#define pr_fmt(fmt) "ACPI: " fmt
++
++#include <linux/init.h>
++#include <linux/acpi.h>
++#include <linux/cpumask.h>
++#include <linux/memblock.h>
++#include <linux/irq.h>
++#include <linux/irqdomain.h>
++#include <linux/bootmem.h>
++#include <linux/smp.h>
++#include <linux/irqchip/arm-gic-acpi.h>
++
++#include <asm/cputype.h>
++#include <asm/cpu_ops.h>
++
++#define ARM64_ACPI_DISABLED_DEFAULT 1
++
++int acpi_noirq; /* skip ACPI IRQ initialization */
++int acpi_disabled = ARM64_ACPI_DISABLED_DEFAULT;
++EXPORT_SYMBOL(acpi_disabled);
++
++int acpi_pci_disabled; /* skip ACPI PCI scan and IRQ initialization */
++EXPORT_SYMBOL(acpi_pci_disabled);
++
++static int enabled_cpus; /* Processors (GICC) with enabled flag in MADT */
++
++static char *boot_method;
++static u64 parked_address[NR_CPUS];
++
++/*
++ * Since we're on ARM, the default interrupt routing model
++ * clearly has to be GIC.
++ */
++enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_GIC;
++
++/*
++ * __acpi_map_table() will be called before page_init(), so early_ioremap()
++ * or early_memremap() should be called here to for ACPI table mapping.
++ */
++char *__init __acpi_map_table(unsigned long phys, unsigned long size)
++{
++ if (!phys || !size)
++ return NULL;
++
++ return early_memremap(phys, size);
++}
++
++void __init __acpi_unmap_table(char *map, unsigned long size)
++{
++ if (!map || !size)
++ return;
++
++ early_memunmap(map, size);
++}
++
++/**
++ * acpi_map_gic_cpu_interface - generates a logical cpu number
++ * and map to MPIDR represented by GICC structure
++ * @mpidr: CPU's hardware id to register, MPIDR represented in MADT
++ * @enabled: this cpu is enabled or not
++ *
++ * Returns the logical cpu number which maps to MPIDR
++ */
++static int acpi_map_gic_cpu_interface(u64 mpidr, u64 parked_addr, u8 enabled)
++{
++ int cpu;
++
++ if (mpidr == INVALID_HWID) {
++ pr_info("Skip invalid cpu hardware ID\n");
++ return -EINVAL;
++ }
++
++ total_cpus++;
++ if (!enabled)
++ return -EINVAL;
++
++ if (enabled_cpus >= NR_CPUS) {
++ pr_warn("NR_CPUS limit of %d reached, Processor %d/0x%llx ignored.\n",
++ NR_CPUS, total_cpus, mpidr);
++ return -EINVAL;
++ }
++
++ /* No need to check duplicate MPIDRs for the first CPU */
++ if (enabled_cpus) {
++ /*
++ * Duplicate MPIDRs are a recipe for disaster. Scan
++ * all initialized entries and check for
++ * duplicates. If any is found just ignore the CPU.
++ */
++ for_each_possible_cpu(cpu) {
++ if (cpu_logical_map(cpu) == mpidr) {
++ pr_err("Firmware bug, duplicate CPU MPIDR: 0x%llx in MADT\n",
++ mpidr);
++ return -EINVAL;
++ }
++ }
++
++ /* allocate a logical cpu id for the new comer */
++ cpu = cpumask_next_zero(-1, cpu_possible_mask);
++ } else {
++ /* First GICC entry must be BSP as ACPI spec said */
++ if (cpu_logical_map(0) != mpidr) {
++ pr_err("First GICC entry with MPIDR 0x%llx is not BSP\n",
++ mpidr);
++ return -EINVAL;
++ }
++
++ /*
++ * boot_cpu_init() already hold bit 0 in cpu_present_mask
++ * for BSP, no need to allocate again.
++ */
++ cpu = 0;
++ }
++
++ parked_address[cpu] = parked_addr;
++
++ /* CPU 0 was already initialized */
++ if (cpu) {
++ cpu_ops[cpu] = cpu_get_ops(boot_method);
++ if (!cpu_ops[cpu])
++ return -EINVAL;
++
++ if (cpu_ops[cpu]->cpu_init(NULL, cpu))
++ return -EOPNOTSUPP;
++
++ /* map the logical cpu id to cpu MPIDR */
++ cpu_logical_map(cpu) = mpidr;
++
++ set_cpu_possible(cpu, true);
++ } else {
++ /* get cpu0's ops, no need to return if ops is null */
++ cpu_ops[0] = cpu_get_ops(boot_method);
++ }
++
++ enabled_cpus++;
++ return cpu;
++}
++
++static int __init
++acpi_parse_gic_cpu_interface(struct acpi_subtable_header *header,
++ const unsigned long end)
++{
++ struct acpi_madt_generic_interrupt *processor;
++
++ processor = (struct acpi_madt_generic_interrupt *)header;
++
++ if (BAD_MADT_ENTRY(processor, end))
++ return -EINVAL;
++
++ acpi_table_print_madt_entry(header);
++
++ acpi_map_gic_cpu_interface(processor->arm_mpidr & MPIDR_HWID_BITMASK,
++ processor->parked_address, processor->flags & ACPI_MADT_ENABLED);
++
++ return 0;
++}
++
++/* Parse GIC cpu interface entries in MADT for SMP init */
++void __init acpi_smp_init_cpus(void)
++{
++ int count;
++
++ /*
++ * do a partial walk of MADT to determine how many CPUs
++ * we have including disabled CPUs, and get information
++ * we need for SMP init
++ */
++ count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
++ acpi_parse_gic_cpu_interface, 0);
++
++ if (!count) {
++ pr_err("No GIC CPU interface entries present\n");
++ return;
++ } else if (count < 0) {
++ pr_err("Error parsing GIC CPU interface entry\n");
++ return;
++ }
++
++ /* Make boot-up look pretty */
++ pr_info("%d CPUs enabled, %d CPUs total\n", enabled_cpus, total_cpus);
++}
++
++int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
++{
++ *irq = irq_find_mapping(NULL, gsi);
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(acpi_gsi_to_irq);
++
++/*
++ * success: return IRQ number (>0)
++ * failure: return =< 0
++ */
++int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
++{
++ unsigned int irq;
++ unsigned int irq_type;
++
++ /*
++ * ACPI have no bindings to indicate SPI or PPI, so we
++ * use different mappings from DT in ACPI.
++ *
++ * For FDT
++ * PPI interrupt: in the range [0, 15];
++ * SPI interrupt: in the range [0, 987];
++ *
++ * For ACPI, GSI should be unique so using
++ * the hwirq directly for the mapping:
++ * PPI interrupt: in the range [16, 31];
++ * SPI interrupt: in the range [32, 1019];
++ */
++
++ if (trigger == ACPI_EDGE_SENSITIVE &&
++ polarity == ACPI_ACTIVE_LOW)
++ irq_type = IRQ_TYPE_EDGE_FALLING;
++ else if (trigger == ACPI_EDGE_SENSITIVE &&
++ polarity == ACPI_ACTIVE_HIGH)
++ irq_type = IRQ_TYPE_EDGE_RISING;
++ else if (trigger == ACPI_LEVEL_SENSITIVE &&
++ polarity == ACPI_ACTIVE_LOW)
++ irq_type = IRQ_TYPE_LEVEL_LOW;
++ else if (trigger == ACPI_LEVEL_SENSITIVE &&
++ polarity == ACPI_ACTIVE_HIGH)
++ irq_type = IRQ_TYPE_LEVEL_HIGH;
++ else
++ irq_type = IRQ_TYPE_NONE;
++
++ /*
++ * Since only one GIC is supported in ACPI 5.0, we can
++ * create mapping refer to the default domain
++ */
++ irq = irq_create_mapping(NULL, gsi);
++ if (!irq)
++ return irq;
++
++ /* Set irq type if specified and different than the current one */
++ if (irq_type != IRQ_TYPE_NONE &&
++ irq_type != irq_get_trigger_type(irq))
++ irq_set_irq_type(irq, irq_type);
++ return irq;
++}
++EXPORT_SYMBOL_GPL(acpi_register_gsi);
++
++void acpi_unregister_gsi(u32 gsi)
++{
++}
++EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
++
++static int __init acpi_parse_fadt(struct acpi_table_header *table)
++{
++ struct acpi_table_fadt *fadt = (struct acpi_table_fadt *)table;
++
++ /*
++ * Revision in table header is the FADT Major revision,
++ * and there is a minor revision of FADT which was introduced
++ * by ACPI 5.1, we only deal with ACPI 5.1 or higher revision
++ * to get arm boot flags, or we will disable ACPI.
++ */
++ if (table->revision > 5 ||
++ (table->revision == 5 && fadt->minor_revision >= 1)) {
++ /*
++ * ACPI 5.1 only has two explicit methods to boot up SMP,
++ * PSCI and Parking protocol, but the Parking protocol is
++ * only specified for ARMv7 now, so make PSCI as the only
++ * way for the SMP boot protocol before some updates for
++ * the ACPI spec or the Parking protocol spec.
++ */
++ if (acpi_psci_present())
++ boot_method = "psci";
++ else if (IS_ENABLED(CONFIG_ARM_PARKING_PROTOCOL))
++ boot_method = "parking-protocol";
++
++ if (!boot_method)
++ pr_warn("has no boot support, will not bring up secondary CPUs\n");
++ return -EOPNOTSUPP;
++ }
++
++ pr_warn("Unsupported FADT revision %d.%d, should be 5.1+, will disable ACPI\n",
++ table->revision, fadt->minor_revision);
++ disable_acpi();
++
++ return -EINVAL;
++}
++
++/*
++ * acpi_boot_table_init() called from setup_arch(), always.
++ * 1. find RSDP and get its address, and then find XSDT
++ * 2. extract all tables and checksums them all
++ * 3. check ACPI FADT revisoin
++ *
++ * We can parse ACPI boot-time tables such as MADT after
++ * this function is called.
++ */
++void __init acpi_boot_table_init(void)
++{
++ /* If acpi_disabled, bail out */
++ if (acpi_disabled)
++ return;
++
++ /* Initialize the ACPI boot-time table parser. */
++ if (acpi_table_init()) {
++ disable_acpi();
++ return;
++ }
++
++ if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt))
++ pr_err("Can't find FADT or error happened during parsing FADT\n");
++}
++
++void __init acpi_gic_init(void)
++{
++ struct acpi_table_header *table;
++ acpi_status status;
++ acpi_size tbl_size;
++ int err;
++
++ status = acpi_get_table_with_size(ACPI_SIG_MADT, 0, &table, &tbl_size);
++ if (ACPI_FAILURE(status)) {
++ const char *msg = acpi_format_exception(status);
++
++ pr_err("Failed to get MADT table, %s\n", msg);
++ return;
++ }
++
++ err = gic_v2_acpi_init(table);
++ if (err)
++ pr_err("Failed to initialize GIC IRQ controller");
++
++ early_acpi_os_unmap_memory((char *)table, tbl_size);
++}
++
++/*
++ * Parked Address in ACPI GIC structure will be used as the CPU
++ * release address
++ */
++int acpi_get_cpu_parked_address(int cpu, u64 *addr)
++{
++ if (!addr || !parked_address[cpu])
++ return -EINVAL;
++
++ *addr = parked_address[cpu];
++
++ return 0;
++}
++
++static int __init parse_acpi(char *arg)
++{
++ if (!arg)
++ return -EINVAL;
++
++ /* "acpi=off" disables both ACPI table parsing and interpreter */
++ if (strcmp(arg, "off") == 0)
++ acpi_disabled = 1;
++ else if (strcmp(arg, "on") == 0)
++ acpi_disabled = 0;
++ else
++ return -EINVAL; /* Core will print when we return error */
++
++ return 0;
++}
++early_param("acpi", parse_acpi);
++
++int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi)
++{
++ return -1;
++}
++
++int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
++{
++ /* TBD */
++ return -EINVAL;
++}
++EXPORT_SYMBOL(acpi_register_ioapic);
++
++int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
++{
++ /* TBD */
++ return -EINVAL;
++}
++EXPORT_SYMBOL(acpi_unregister_ioapic);
++
+diff --git a/arch/arm64/kernel/cpu_ops.c b/arch/arm64/kernel/cpu_ops.c
+index cce9524..1d90f31 100644
+--- a/arch/arm64/kernel/cpu_ops.c
++++ b/arch/arm64/kernel/cpu_ops.c
+@@ -23,19 +23,23 @@
+ #include <linux/string.h>
+
+ extern const struct cpu_operations smp_spin_table_ops;
++extern const struct cpu_operations smp_parking_protocol_ops;
+ extern const struct cpu_operations cpu_psci_ops;
+
+ const struct cpu_operations *cpu_ops[NR_CPUS];
+
+-static const struct cpu_operations *supported_cpu_ops[] __initconst = {
++static const struct cpu_operations *supported_cpu_ops[] = {
+ #ifdef CONFIG_SMP
+ &smp_spin_table_ops,
++#ifdef CONFIG_ARM_PARKING_PROTOCOL
++ &smp_parking_protocol_ops,
++#endif
+ #endif
+ &cpu_psci_ops,
+ NULL,
+ };
+
+-static const struct cpu_operations * __init cpu_get_ops(const char *name)
++const struct cpu_operations *cpu_get_ops(const char *name)
+ {
+ const struct cpu_operations **ops = supported_cpu_ops;
+
diff --git a/arch/arm64/kernel/efi-stub.c b/arch/arm64/kernel/efi-stub.c
index 1317fef..d27dd98 100644
--- a/arch/arm64/kernel/efi-stub.c
@@ -560,10 +1785,10 @@ index 1317fef..d27dd98 100644
diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c
-index e72f310..72ee260 100644
+index 03aaa99..6c4de44 100644
--- a/arch/arm64/kernel/efi.c
+++ b/arch/arm64/kernel/efi.c
-@@ -475,3 +475,14 @@ err_unmap:
+@@ -479,3 +479,14 @@ err_unmap:
return -1;
}
early_initcall(arm64_enter_virtual_mode);
@@ -579,7 +1804,7 @@ index e72f310..72ee260 100644
+ return pm_power_off == NULL;
+}
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
-index 144f105..b6ca95a 100644
+index 8730690..0a6e4f9 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -151,7 +151,7 @@ optional_header:
@@ -611,10 +1836,10 @@ index 144f105..b6ca95a 100644
.long stext - efi_head // PointerToRawData
diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
new file mode 100644
-index 0000000..955d6d1
+index 0000000..ce5836c
--- /dev/null
+++ b/arch/arm64/kernel/pci.c
-@@ -0,0 +1,38 @@
+@@ -0,0 +1,70 @@
+/*
+ * Code borrowed from powerpc/kernel/pci-common.c
+ *
@@ -653,8 +1878,40 @@ index 0000000..955d6d1
+{
+ return res->start;
+}
++
++/*
++ * Try to assign the IRQ number from DT when adding a new device
++ */
++int pcibios_add_device(struct pci_dev *dev)
++{
++ dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
++
++ return 0;
++}
++
++
++#ifdef CONFIG_PCI_DOMAINS_GENERIC
++static bool dt_domain_found = false;
++
++void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent)
++{
++ int domain = of_get_pci_domain_nr(parent->of_node);
++
++ if (domain >= 0) {
++ dt_domain_found = true;
++ } else if (dt_domain_found == true) {
++ dev_err(parent, "Node %s is missing \"linux,pci-domain\" property in DT\n",
++ parent->of_node->full_name);
++ return;
++ } else {
++ domain = pci_get_new_domain_nr();
++ }
++
++ bus->domain_nr = domain;
++}
++#endif
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
-index 1309d64..8ff5208 100644
+index 29d4869..c0427bc 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -43,6 +43,7 @@
@@ -677,8 +1934,345 @@ index 1309d64..8ff5208 100644
* Whoops - the architecture was unable to reboot.
*/
printk("Reboot failed -- System halted\n");
+diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
+index 5539547..15ba470 100644
+--- a/arch/arm64/kernel/psci.c
++++ b/arch/arm64/kernel/psci.c
+@@ -15,6 +15,7 @@
+
+ #define pr_fmt(fmt) "psci: " fmt
+
++#include <linux/acpi.h>
+ #include <linux/init.h>
+ #include <linux/of.h>
+ #include <linux/smp.h>
+@@ -23,6 +24,7 @@
+ #include <linux/delay.h>
+ #include <uapi/linux/psci.h>
+
++#include <asm/acpi.h>
+ #include <asm/compiler.h>
+ #include <asm/cpu_ops.h>
+ #include <asm/errno.h>
+@@ -231,6 +233,33 @@ static void psci_sys_poweroff(void)
+ invoke_psci_fn(PSCI_0_2_FN_SYSTEM_OFF, 0, 0, 0);
+ }
+
++static void psci_0_2_set_functions(void)
++{
++ pr_info("Using standard PSCI v0.2 function IDs\n");
++ psci_function_id[PSCI_FN_CPU_SUSPEND] = PSCI_0_2_FN64_CPU_SUSPEND;
++ psci_ops.cpu_suspend = psci_cpu_suspend;
++
++ psci_function_id[PSCI_FN_CPU_OFF] = PSCI_0_2_FN_CPU_OFF;
++ psci_ops.cpu_off = psci_cpu_off;
++
++ psci_function_id[PSCI_FN_CPU_ON] = PSCI_0_2_FN64_CPU_ON;
++ psci_ops.cpu_on = psci_cpu_on;
++
++ psci_function_id[PSCI_FN_MIGRATE] = PSCI_0_2_FN64_MIGRATE;
++ psci_ops.migrate = psci_migrate;
++
++ psci_function_id[PSCI_FN_AFFINITY_INFO] = PSCI_0_2_FN64_AFFINITY_INFO;
++ psci_ops.affinity_info = psci_affinity_info;
++
++ psci_function_id[PSCI_FN_MIGRATE_INFO_TYPE] =
++ PSCI_0_2_FN_MIGRATE_INFO_TYPE;
++ psci_ops.migrate_info_type = psci_migrate_info_type;
++
++ arm_pm_restart = psci_sys_reset;
++
++ pm_power_off = psci_sys_poweroff;
++}
++
+ /*
+ * PSCI Function IDs for v0.2+ are well defined so use
+ * standard values.
+@@ -264,29 +293,7 @@ static int __init psci_0_2_init(struct device_node *np)
+ }
+ }
+
+- pr_info("Using standard PSCI v0.2 function IDs\n");
+- psci_function_id[PSCI_FN_CPU_SUSPEND] = PSCI_0_2_FN64_CPU_SUSPEND;
+- psci_ops.cpu_suspend = psci_cpu_suspend;
+-
+- psci_function_id[PSCI_FN_CPU_OFF] = PSCI_0_2_FN_CPU_OFF;
+- psci_ops.cpu_off = psci_cpu_off;
+-
+- psci_function_id[PSCI_FN_CPU_ON] = PSCI_0_2_FN64_CPU_ON;
+- psci_ops.cpu_on = psci_cpu_on;
+-
+- psci_function_id[PSCI_FN_MIGRATE] = PSCI_0_2_FN64_MIGRATE;
+- psci_ops.migrate = psci_migrate;
+-
+- psci_function_id[PSCI_FN_AFFINITY_INFO] = PSCI_0_2_FN64_AFFINITY_INFO;
+- psci_ops.affinity_info = psci_affinity_info;
+-
+- psci_function_id[PSCI_FN_MIGRATE_INFO_TYPE] =
+- PSCI_0_2_FN_MIGRATE_INFO_TYPE;
+- psci_ops.migrate_info_type = psci_migrate_info_type;
+-
+- arm_pm_restart = psci_sys_reset;
+-
+- pm_power_off = psci_sys_poweroff;
++ psci_0_2_set_functions();
+
+ out_put_node:
+ of_node_put(np);
+@@ -339,7 +346,7 @@ static const struct of_device_id psci_of_match[] __initconst = {
+ {},
+ };
+
+-int __init psci_init(void)
++int __init psci_dt_init(void)
+ {
+ struct device_node *np;
+ const struct of_device_id *matched_np;
+@@ -354,6 +361,29 @@ int __init psci_init(void)
+ return init_fn(np);
+ }
+
++/*
++ * We use PSCI 0.2+ when ACPI is deployed on ARM64 and it's
++ * explicitly clarified in SBBR
++ */
++int __init psci_acpi_init(void)
++{
++ if (!acpi_psci_present()) {
++ pr_info("is not implemented in ACPI.\n");
++ return -EOPNOTSUPP;
++ }
++
++ pr_info("probing for conduit method from ACPI.\n");
++
++ if (acpi_psci_use_hvc())
++ invoke_psci_fn = __invoke_psci_fn_hvc;
++ else
++ invoke_psci_fn = __invoke_psci_fn_smc;
++
++ psci_0_2_set_functions();
++
++ return 0;
++}
++
+ #ifdef CONFIG_SMP
+
+ static int __init cpu_psci_cpu_init(struct device_node *dn, unsigned int cpu)
+diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
+index edb146d..4758443 100644
+--- a/arch/arm64/kernel/setup.c
++++ b/arch/arm64/kernel/setup.c
+@@ -43,6 +43,7 @@
+ #include <linux/of_fdt.h>
+ #include <linux/of_platform.h>
+ #include <linux/efi.h>
++#include <linux/acpi.h>
+
+ #include <asm/fixmap.h>
+ #include <asm/cpu.h>
+@@ -59,6 +60,10 @@
+ #include <asm/memblock.h>
+ #include <asm/psci.h>
+ #include <asm/efi.h>
++#include <asm/acpi.h>
++
++int acadia_kvm_acpi=0;
++EXPORT_SYMBOL(acadia_kvm_acpi);
+
+ unsigned int processor_id;
+ EXPORT_SYMBOL(processor_id);
+@@ -385,22 +390,34 @@ void __init setup_arch(char **cmdline_p)
+
+ parse_early_param();
+
++ if (acpi_disabled)
++ disable_acpi();
++
+ efi_init();
+ arm64_memblock_init();
+
++ /* Parse the ACPI tables for possible boot-time configuration */
++ acpi_boot_table_init();
++
+ paging_init();
+ request_standard_resources();
+
+ efi_idmap_init();
+
+- unflatten_device_tree();
+-
+- psci_init();
+-
+ cpu_logical_map(0) = read_cpuid_mpidr() & MPIDR_HWID_BITMASK;
+- cpu_read_bootcpu_ops();
++ if (acpi_disabled) {
++ unflatten_device_tree();
++ psci_dt_init();
++ cpu_read_bootcpu_ops();
++#ifdef CONFIG_SMP
++ of_smp_init_cpus();
++#endif
++ } else {
++ psci_acpi_init();
++ acpi_smp_init_cpus();
++ }
++
+ #ifdef CONFIG_SMP
+- smp_init_cpus();
+ smp_build_mpidr_hash();
+ #endif
+
+@@ -413,6 +430,19 @@ void __init setup_arch(char **cmdline_p)
+ #endif
+ }
+
++static int __init parse_kvm_acpi(char *arg)
++{
++ if (!arg)
++ return -EINVAL;
++
++ if (strcmp(arg, "on") == 0) {
++ acadia_kvm_acpi = 1;
++ }
++
++ return 0;
++}
++early_param("kvmacpi", parse_kvm_acpi);
++
+ static int __init arm64_device_init(void)
+ {
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
+index 4743397..4e390ac 100644
+--- a/arch/arm64/kernel/smp.c
++++ b/arch/arm64/kernel/smp.c
+@@ -321,7 +321,7 @@ void __init smp_prepare_boot_cpu(void)
+ * cpu logical map array containing MPIDR values related to logical
+ * cpus. Assumes that cpu_logical_map(0) has already been initialized.
+ */
+-void __init smp_init_cpus(void)
++void __init of_smp_init_cpus(void)
+ {
+ struct device_node *dn = NULL;
+ unsigned int i, cpu = 1;
+diff --git a/arch/arm64/kernel/smp_parking_protocol.c b/arch/arm64/kernel/smp_parking_protocol.c
+new file mode 100644
+index 0000000..e1153ce
+--- /dev/null
++++ b/arch/arm64/kernel/smp_parking_protocol.c
+@@ -0,0 +1,110 @@
++/*
++ * Parking Protocol SMP initialisation
++ *
++ * Based largely on spin-table method.
++ *
++ * Copyright (C) 2013 ARM Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++#include <linux/delay.h>
++#include <linux/init.h>
++#include <linux/of.h>
++#include <linux/smp.h>
++#include <linux/types.h>
++#include <linux/acpi.h>
++
++#include <asm/cacheflush.h>
++#include <asm/cpu_ops.h>
++#include <asm/cputype.h>
++#include <asm/smp_plat.h>
++
++static phys_addr_t cpu_mailbox_addr[NR_CPUS];
++
++static void (*__smp_boot_wakeup)(int cpu);
++
++void set_smp_boot_wakeup_call(void (*fn)(int cpu))
++{
++ __smp_boot_wakeup = fn;
++}
++
++static int smp_parking_protocol_cpu_init(struct device_node *dn,
++ unsigned int cpu)
++{
++ /*
++ * Determine the mailbox address.
++ */
++ if (!acpi_get_cpu_parked_address(cpu, &cpu_mailbox_addr[cpu])) {
++ pr_info("%s: ACPI parked addr=%llx\n",
++ __func__, cpu_mailbox_addr[cpu]);
++ return 0;
++ }
++
++ pr_err("CPU %d: missing or invalid parking protocol mailbox\n", cpu);
++
++ return -1;
++}
++
++static int smp_parking_protocol_cpu_prepare(unsigned int cpu)
++{
++ return 0;
++}
++
++struct parking_protocol_mailbox {
++ __le32 cpu_id;
++ __le32 reserved;
++ __le64 entry_point;
++};
++
++static int smp_parking_protocol_cpu_boot(unsigned int cpu)
++{
++ struct parking_protocol_mailbox __iomem *mailbox;
++
++ if (!cpu_mailbox_addr[cpu] || !__smp_boot_wakeup)
++ return -ENODEV;
++
++ /*
++ * The mailbox may or may not be inside the linear mapping.
++ * As ioremap_cache will either give us a new mapping or reuse the
++ * existing linear mapping, we can use it to cover both cases. In
++ * either case the memory will be MT_NORMAL.
++ */
++ mailbox = ioremap_cache(cpu_mailbox_addr[cpu], sizeof(*mailbox));
++ if (!mailbox)
++ return -ENOMEM;
++
++ /*
++ * We write the entry point and cpu id as LE regardless of the
++ * native endianess of the kernel. Therefore, any boot-loaders
++ * that read this address need to convert this address to the
++ * Boot-Loader's endianess before jumping.
++ */
++ writeq(__pa(secondary_entry), &mailbox->entry_point);
++ writel(cpu, &mailbox->cpu_id);
++ __flush_dcache_area(mailbox, sizeof(*mailbox));
++ __smp_boot_wakeup(cpu);
++
++ /* temp hack for broken firmware */
++ sev();
++
++ iounmap(mailbox);
++
++ return 0;
++}
++
++const struct cpu_operations smp_parking_protocol_ops = {
++ .name = "parking-protocol",
++ .cpu_init = smp_parking_protocol_cpu_init,
++ .cpu_prepare = smp_parking_protocol_cpu_prepare,
++ .cpu_boot = smp_parking_protocol_cpu_boot,
++};
diff --git a/arch/arm64/kernel/smp_spin_table.c b/arch/arm64/kernel/smp_spin_table.c
-index 0347d38..70181c1 100644
+index 0347d38..4f93c67 100644
--- a/arch/arm64/kernel/smp_spin_table.c
+++ b/arch/arm64/kernel/smp_spin_table.c
@@ -20,6 +20,7 @@
@@ -713,7 +2307,7 @@ index 0347d38..70181c1 100644
/*
* We write the release address as LE regardless of the native
-@@ -79,15 +89,16 @@ static int smp_spin_table_cpu_prepare(unsigned int cpu)
+@@ -79,15 +89,17 @@ static int smp_spin_table_cpu_prepare(unsigned int cpu)
* boot-loader's endianess before jumping. This is mandated by
* the boot protocol.
*/
@@ -721,7 +2315,8 @@ index 0347d38..70181c1 100644
-
- __flush_dcache_area(release_addr, sizeof(release_addr[0]));
+ writeq_relaxed(__pa(secondary_holding_pen), release_addr);
-+ __flush_dcache_area(release_addr, sizeof(*release_addr));
++ __flush_dcache_area((__force void *)release_addr,
++ sizeof(*release_addr));
/*
* Send an event to wake up the secondary CPU.
@@ -733,11 +2328,702 @@ index 0347d38..70181c1 100644
return 0;
}
+diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c
+index 1a7125c..42f9195 100644
+--- a/arch/arm64/kernel/time.c
++++ b/arch/arm64/kernel/time.c
+@@ -35,6 +35,7 @@
+ #include <linux/delay.h>
+ #include <linux/clocksource.h>
+ #include <linux/clk-provider.h>
++#include <linux/acpi.h>
+
+ #include <clocksource/arm_arch_timer.h>
+
+@@ -72,6 +73,12 @@ void __init time_init(void)
+
+ tick_setup_hrtimer_broadcast();
+
++ /*
++ * Since ACPI or FDT will only one be available in the system,
++ * we can use acpi_generic_timer_init() here safely
++ */
++ acpi_generic_timer_init();
++
+ arch_timer_rate = arch_timer_get_rate();
+ if (!arch_timer_rate)
+ panic("Unable to initialise architected timer.\n");
+diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S
+index c319116..fa7e67e 100644
+--- a/arch/arm64/kvm/hyp-init.S
++++ b/arch/arm64/kvm/hyp-init.S
+@@ -63,17 +63,21 @@ __do_hyp_init:
+ mrs x4, tcr_el1
+ ldr x5, =TCR_EL2_MASK
+ and x4, x4, x5
+- ldr x5, =TCR_EL2_FLAGS
+- orr x4, x4, x5
+- msr tcr_el2, x4
+-
+- ldr x4, =VTCR_EL2_FLAGS
+ /*
+ * Read the PARange bits from ID_AA64MMFR0_EL1 and set the PS bits in
+- * VTCR_EL2.
++ * TCR_EL2 and both PS bits and T0SZ bits in VTCR_EL2.
+ */
+ mrs x5, ID_AA64MMFR0_EL1
+ bfi x4, x5, #16, #3
++ msr tcr_el2, x4
++
++ ldr x4, =VTCR_EL2_FLAGS
++ bfi x4, x5, #16, #3
++ and x5, x5, #0xf
++ adr x6, t0sz
++ add x6, x6, x5, lsl #2
++ ldr w5, [x6]
++ orr x4, x4, x5
+ msr vtcr_el2, x4
+
+ mrs x4, mair_el1
+@@ -113,6 +117,10 @@ target: /* We're now in the trampoline code, switch page tables */
+
+ /* Hello, World! */
+ eret
++
++t0sz:
++ .word VTCR_EL2_T0SZ(32), VTCR_EL2_T0SZ(36), VTCR_EL2_T0SZ(40)
++ .word VTCR_EL2_T0SZ(42), VTCR_EL2_T0SZ(44), VTCR_EL2_T0SZ(48)
+ ENDPROC(__kvm_hyp_init)
+
+ .ltorg
+diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
+index 4164c5a..b864a24 100644
+--- a/arch/arm64/mm/dma-mapping.c
++++ b/arch/arm64/mm/dma-mapping.c
+@@ -23,10 +23,13 @@
+ #include <linux/dma-mapping.h>
+ #include <linux/dma-contiguous.h>
+ #include <linux/of.h>
++#include <linux/of_address.h>
+ #include <linux/platform_device.h>
+ #include <linux/vmalloc.h>
+ #include <linux/swiotlb.h>
+ #include <linux/amba/bus.h>
++#include <linux/acpi.h>
++#include <linux/pci.h>
+
+ #include <asm/cacheflush.h>
+
+@@ -319,6 +322,63 @@ static int dma_bus_notifier(struct notifier_block *nb,
+ if (of_property_read_bool(dev->of_node, "dma-coherent"))
+ set_dma_ops(dev, &coherent_swiotlb_dma_ops);
+
++#ifdef CONFIG_ACPI
++ else if (ACPI_HANDLE(dev)) {
++ acpi_status status;
++ int coherent;
++
++ /*
++ * Kernel defaults to noncoherent ops but ACPI 5.1 spec says arm64
++ * defaults to coherent. Set coherent ops if _CCA not found or _CCA
++ * found and non-zero.
++ */
++ status = acpi_check_coherency(ACPI_HANDLE(dev), &coherent);
++ if (ACPI_FAILURE(status) || coherent)
++ set_dma_ops(dev, &coherent_swiotlb_dma_ops);
++ }
++#endif
++ return NOTIFY_OK;
++}
++
++static int dma_bus_notifier_pci(struct notifier_block *nb,
++ unsigned long event, void *_dev)
++{
++ struct device *dev = _dev;
++
++ if (event != BUS_NOTIFY_ADD_DEVICE)
++ return NOTIFY_DONE;
++
++ /*
++ * PCI devices won't have an of_node but the bridge will.
++ * Search up the device chain until we find an of_node
++ * to check.
++ */
++ while (dev) {
++ if (dev->of_node) {
++ if (of_dma_is_coherent(dev->of_node))
++ set_dma_ops(_dev, &coherent_swiotlb_dma_ops);
++ break;
++ }
++#ifdef CONFIG_ACPI
++ if (ACPI_HANDLE(dev)) {
++ acpi_status status;
++ int coherent;
++
++ /*
++ * Kernel defaults to noncoherent ops but ACPI 5.1 spec says arm64
++ * defaults to coherent. Set coherent ops if _CCA not found or _CCA
++ * found and non-zero.
++ */
++ status = acpi_check_coherency(ACPI_HANDLE(dev), &coherent);
++ if (ACPI_FAILURE(status) || coherent) {
++ set_dma_ops(dev, &coherent_swiotlb_dma_ops);
++ break;
++ }
++ }
++#endif
++ dev = dev->parent;
++ }
++
+ return NOTIFY_OK;
+ }
+
+@@ -330,6 +390,10 @@ static struct notifier_block amba_bus_nb = {
+ .notifier_call = dma_bus_notifier,
+ };
+
++static struct notifier_block pci_bus_nb = {
++ .notifier_call = dma_bus_notifier_pci,
++};
++
+ extern int swiotlb_late_init_with_default_size(size_t default_size);
+
+ static int __init swiotlb_late_init(void)
+@@ -341,6 +405,7 @@ static int __init swiotlb_late_init(void)
+ */
+ bus_register_notifier(&platform_bus_type, &platform_bus_nb);
+ bus_register_notifier(&amba_bustype, &amba_bus_nb);
++ bus_register_notifier(&pci_bus_type, &pci_bus_nb);
+
+ dma_ops = &noncoherent_swiotlb_dma_ops;
+
+diff --git a/arch/arm64/pci/Makefile b/arch/arm64/pci/Makefile
+new file mode 100644
+index 0000000..b8d5dbd
+--- /dev/null
++++ b/arch/arm64/pci/Makefile
+@@ -0,0 +1 @@
++obj-y += pci.o
+diff --git a/arch/arm64/pci/pci.c b/arch/arm64/pci/pci.c
+new file mode 100644
+index 0000000..b03b0eb
+--- /dev/null
++++ b/arch/arm64/pci/pci.c
+@@ -0,0 +1,28 @@
++#include <linux/acpi.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/pci.h>
++
++/**
++ * raw_pci_read - Platform-specific PCI config space access.
++ *
++ * Default empty implementation. Replace with an architecture-specific setup
++ * routine, if necessary.
++ */
++int __weak raw_pci_read(unsigned int domain, unsigned int bus,
++ unsigned int devfn, int reg, int len, u32 *val)
++{
++ return -EINVAL;
++}
++
++int __weak raw_pci_write(unsigned int domain, unsigned int bus,
++ unsigned int devfn, int reg, int len, u32 val)
++{
++ return -EINVAL;
++}
++
++/* Root bridge scanning */
++struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
++{
++ return NULL;
++}
+diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
+index d0f3265..3343080 100644
+--- a/drivers/acpi/Kconfig
++++ b/drivers/acpi/Kconfig
+@@ -5,8 +5,7 @@
+ menuconfig ACPI
+ bool "ACPI (Advanced Configuration and Power Interface) Support"
+ depends on !IA64_HP_SIM
+- depends on IA64 || X86
+- depends on PCI
++ depends on ((IA64 || X86) && PCI) || ARM64
+ select PNP
+ default y
+ help
+@@ -163,6 +162,7 @@ config ACPI_PROCESSOR
+ tristate "Processor"
+ select THERMAL
+ select CPU_IDLE
++ depends on X86 || IA64
+ default y
+ help
+ This driver installs ACPI as the idle handler for Linux and uses
+@@ -263,7 +263,7 @@ config ACPI_DEBUG
+
+ config ACPI_PCI_SLOT
+ bool "PCI slot detection driver"
+- depends on SYSFS
++ depends on SYSFS && PCI
+ default n
+ help
+ This driver creates entries in /sys/bus/pci/slots/ for all PCI
+diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
+index 505d4d7..6f3a74d 100644
+--- a/drivers/acpi/Makefile
++++ b/drivers/acpi/Makefile
+@@ -23,7 +23,11 @@ acpi-y += nvs.o
+
+ # Power management related files
+ acpi-y += wakeup.o
++ifeq ($(ARCH), arm64)
++acpi-y += sleep-arm.o
++else # X86, IA64
+ acpi-y += sleep.o
++endif
+ acpi-y += device_pm.o
+ acpi-$(CONFIG_ACPI_SLEEP) += proc.o
+
+@@ -39,7 +43,7 @@ acpi-y += processor_core.o
+ acpi-$(CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC) += processor_pdc.o
+ acpi-y += ec.o
+ acpi-$(CONFIG_ACPI_DOCK) += dock.o
+-acpi-y += pci_root.o pci_link.o pci_irq.o
++acpi-$(CONFIG_PCI) += pci_root.o pci_link.o pci_irq.o
+ acpi-y += acpi_lpss.o
+ acpi-y += acpi_platform.o
+ acpi-y += acpi_pnp.o
+diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c
+index 14cb6c0..5cd017c 100644
+--- a/drivers/acpi/acpica/utresrc.c
++++ b/drivers/acpi/acpica/utresrc.c
+@@ -87,7 +87,9 @@ const char *acpi_gbl_io_decode[] = {
+
+ const char *acpi_gbl_ll_decode[] = {
+ "ActiveHigh",
+- "ActiveLow"
++ "ActiveLow",
++ "ActiveBoth",
++ "Reserved"
+ };
+
+ const char *acpi_gbl_max_decode[] = {
+diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
+index 8b67bd0..c412fdb 100644
+--- a/drivers/acpi/bus.c
++++ b/drivers/acpi/bus.c
+@@ -448,6 +448,9 @@ static int __init acpi_bus_init_irq(void)
+ case ACPI_IRQ_MODEL_IOSAPIC:
+ message = "IOSAPIC";
+ break;
++ case ACPI_IRQ_MODEL_GIC:
++ message = "GIC";
++ break;
+ case ACPI_IRQ_MODEL_PLATFORM:
+ message = "platform specific model";
+ break;
+diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
+index 4c5cf77..e1e6487 100644
+--- a/drivers/acpi/internal.h
++++ b/drivers/acpi/internal.h
+@@ -26,8 +26,13 @@
+ acpi_status acpi_os_initialize1(void);
+ int init_acpi_device_notify(void);
+ int acpi_scan_init(void);
++#ifdef CONFIG_PCI
+ void acpi_pci_root_init(void);
+ void acpi_pci_link_init(void);
++#else
++static inline void acpi_pci_root_init(void) {}
++static inline void acpi_pci_link_init(void) {}
++#endif
+ void acpi_processor_init(void);
+ void acpi_platform_init(void);
+ void acpi_pnp_init(void);
+diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
+index 3abe9b2..c50757b 100644
+--- a/drivers/acpi/osl.c
++++ b/drivers/acpi/osl.c
+@@ -326,11 +326,11 @@ acpi_map_lookup_virt(void __iomem *virt, acpi_size size)
+ return NULL;
+ }
+
+-#ifndef CONFIG_IA64
+-#define should_use_kmap(pfn) page_is_ram(pfn)
+-#else
++#if defined(CONFIG_IA64) || defined(CONFIG_ARM) || defined(CONFIG_ARM64)
+ /* ioremap will take care of cache attributes */
+ #define should_use_kmap(pfn) 0
++#else
++#define should_use_kmap(pfn) page_is_ram(pfn)
+ #endif
+
+ static void __iomem *acpi_map(acpi_physical_address pg_off, unsigned long pg_sz)
+diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
+index e32321c..4007313 100644
+--- a/drivers/acpi/processor_core.c
++++ b/drivers/acpi/processor_core.c
+@@ -64,6 +64,38 @@ static int map_lsapic_id(struct acpi_subtable_header *entry,
+ return 0;
+ }
+
++/*
++ * On ARM platform, MPIDR value is the hardware ID as apic ID
++ * on Intel platforms
++ */
++static int map_gicc_mpidr(struct acpi_subtable_header *entry,
++ int device_declaration, u32 acpi_id, int *mpidr)
++{
++ struct acpi_madt_generic_interrupt *gicc =
++ container_of(entry, struct acpi_madt_generic_interrupt, header);
++
++ if (!(gicc->flags & ACPI_MADT_ENABLED))
++ return -ENODEV;
++
++ /* In the GIC interrupt model, logical processors are
++ * required to have a Processor Device object in the DSDT,
++ * so we should check device_declaration here
++ */
++ if (device_declaration && (gicc->uid == acpi_id)) {
++ /*
++ * Only bits [0:7] Aff0, bits [8:15] Aff1, bits [16:23] Aff2
++ * and bits [32:39] Aff3 are meaningful, so pack the Affx
++ * fields into a single 32 bit identifier to accommodate the
++ * acpi processor drivers.
++ */
++ *mpidr = ((gicc->arm_mpidr & 0xff00000000) >> 8)
++ | gicc->arm_mpidr;
++ return 0;
++ }
++
++ return -EINVAL;
++}
++
+ static int map_madt_entry(int type, u32 acpi_id)
+ {
+ unsigned long madt_end, entry;
+@@ -99,6 +131,9 @@ static int map_madt_entry(int type, u32 acpi_id)
+ } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) {
+ if (!map_lsapic_id(header, type, acpi_id, &apic_id))
+ break;
++ } else if (header->type == ACPI_MADT_TYPE_GENERIC_INTERRUPT) {
++ if (!map_gicc_mpidr(header, type, acpi_id, &apic_id))
++ break;
+ }
+ entry += header->length;
+ }
+@@ -131,6 +166,8 @@ static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id)
+ map_lsapic_id(header, type, acpi_id, &apic_id);
+ } else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC) {
+ map_x2apic_id(header, type, acpi_id, &apic_id);
++ } else if (header->type == ACPI_MADT_TYPE_GENERIC_INTERRUPT) {
++ map_gicc_mpidr(header, type, acpi_id, &apic_id);
+ }
+
+ exit:
+diff --git a/drivers/acpi/sleep-arm.c b/drivers/acpi/sleep-arm.c
+new file mode 100644
+index 0000000..54578ef
+--- /dev/null
++++ b/drivers/acpi/sleep-arm.c
+@@ -0,0 +1,28 @@
++/*
++ * ARM64 Specific Sleep Functionality
++ *
++ * Copyright (C) 2013-2014, Linaro Ltd.
++ * Author: Graeme Gregory <graeme.gregory@linaro.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/acpi.h>
++
++/*
++ * Currently the ACPI 5.1 standard does not define S states in a
++ * manner which is usable for ARM64. These two stubs are sufficient
++ * that system initialises and device PM works.
++ */
++u32 acpi_target_system_state(void)
++{
++ return ACPI_STATE_S0;
++}
++EXPORT_SYMBOL_GPL(acpi_target_system_state);
++
++int __init acpi_sleep_init(void)
++{
++ return -ENOSYS;
++}
+diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
+index 6d5a6cd..47f36d4 100644
+--- a/drivers/acpi/tables.c
++++ b/drivers/acpi/tables.c
+@@ -183,6 +183,49 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
+ }
+ break;
+
++ case ACPI_MADT_TYPE_GENERIC_INTERRUPT:
++ {
++ struct acpi_madt_generic_interrupt *p =
++ (struct acpi_madt_generic_interrupt *)header;
++ pr_info("GICC (acpi_id[0x%04x] address[%p] MPDIR[0x%llx] %s)\n",
++ p->uid, (void *)(unsigned long)p->base_address,
++ p->arm_mpidr,
++ (p->flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled");
++
++ }
++ break;
++
++ case ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR:
++ {
++ struct acpi_madt_generic_distributor *p =
++ (struct acpi_madt_generic_distributor *)header;
++ pr_info("GIC Distributor (gic_id[0x%04x] address[%p] gsi_base[%d])\n",
++ p->gic_id,
++ (void *)(unsigned long)p->base_address,
++ p->global_irq_base);
++ }
++ break;
++
++ case ACPI_MADT_TYPE_GENERIC_MSI_FRAME:
++ {
++ struct acpi_madt_generic_msi_frame *p =
++ (struct acpi_madt_generic_msi_frame *)header;
++ pr_info("GIC MSI Frame (msi_fame_id[%d] address[%p])\n",
++ p->msi_frame_id,
++ (void *)(unsigned long)p->base_address);
++ }
++ break;
++
++ case ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR:
++ {
++ struct acpi_madt_generic_redistributor *p =
++ (struct acpi_madt_generic_redistributor *)header;
++ pr_info("GIC Redistributor (address[%p] region_size[0x%x])\n",
++ (void *)(unsigned long)p->base_address,
++ p->length);
++ }
++ break;
++
+ default:
+ pr_warn("Found unsupported MADT entry (type = 0x%x)\n",
+ header->type);
+@@ -192,17 +235,14 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
+
+
+ int __init
+-acpi_table_parse_entries(char *id,
+- unsigned long table_size,
+- int entry_id,
+- acpi_tbl_entry_handler handler,
+- unsigned int max_entries)
++acpi_parse_entries(unsigned long table_size,
++ acpi_tbl_entry_handler handler,
++ struct acpi_table_header *table_header,
++ int entry_id, unsigned int max_entries)
+ {
+- struct acpi_table_header *table_header = NULL;
+ struct acpi_subtable_header *entry;
+- unsigned int count = 0;
++ int count = 0;
+ unsigned long table_end;
+- acpi_size tbl_size;
+
+ if (acpi_disabled)
+ return -ENODEV;
+@@ -210,13 +250,11 @@ acpi_table_parse_entries(char *id,
+ if (!handler)
+ return -EINVAL;
+
+- if (strncmp(id, ACPI_SIG_MADT, 4) == 0)
+- acpi_get_table_with_size(id, acpi_apic_instance, &table_header, &tbl_size);
+- else
+- acpi_get_table_with_size(id, 0, &table_header, &tbl_size);
++ if (!table_size)
++ return -EINVAL;
+
+ if (!table_header) {
+- pr_warn("%4.4s not present\n", id);
++ pr_warn("Table header not present\n");
+ return -ENODEV;
+ }
+
+@@ -230,32 +268,67 @@ acpi_table_parse_entries(char *id,
+ while (((unsigned long)entry) + sizeof(struct acpi_subtable_header) <
+ table_end) {
+ if (entry->type == entry_id
+- && (!max_entries || count++ < max_entries))
++ && (!max_entries || count < max_entries)) {
+ if (handler(entry, table_end))
+- goto err;
++ return -EINVAL;
++
++ count++;
++ }
+
+ /*
+ * If entry->length is 0, break from this loop to avoid
+ * infinite loop.
+ */
+ if (entry->length == 0) {
+- pr_err("[%4.4s:0x%02x] Invalid zero length\n", id, entry_id);
+- goto err;
++ pr_err("[0x%02x] Invalid zero length\n", entry_id);
++ return -EINVAL;
+ }
+
+ entry = (struct acpi_subtable_header *)
+ ((unsigned long)entry + entry->length);
+ }
++
+ if (max_entries && count > max_entries) {
+ pr_warn("[%4.4s:0x%02x] ignored %i entries of %i found\n",
+- id, entry_id, count - max_entries, count);
++ table_header->signature, entry_id, count - max_entries,
++ count);
+ }
+
+- early_acpi_os_unmap_memory((char *)table_header, tbl_size);
+ return count;
+-err:
++}
++
++int __init
++acpi_table_parse_entries(char *id,
++ unsigned long table_size,
++ int entry_id,
++ acpi_tbl_entry_handler handler,
++ unsigned int max_entries)
++{
++ struct acpi_table_header *table_header = NULL;
++ acpi_size tbl_size;
++ int count;
++
++ if (acpi_disabled)
++ return -ENODEV;
++
++ if (!handler)
++ return -EINVAL;
++
++ if (strncmp(id, ACPI_SIG_MADT, 4) == 0)
++ acpi_get_table_with_size(id, acpi_apic_instance, &table_header, &tbl_size);
++ else
++ acpi_get_table_with_size(id, 0, &table_header, &tbl_size);
++
++ if (!table_header) {
++ pr_warn("%4.4s not present\n", id);
++ return -ENODEV;
++ }
++
++ count = acpi_parse_entries(table_size, handler, table_header,
++ entry_id, max_entries);
++
+ early_acpi_os_unmap_memory((char *)table_header, tbl_size);
+- return -EINVAL;
++ return count;
+ }
+
+ int __init
+diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
+index 07c8c5a..aec9656 100644
+--- a/drivers/acpi/utils.c
++++ b/drivers/acpi/utils.c
+@@ -698,3 +698,29 @@ bool acpi_check_dsm(acpi_handle handle, const u8 *uuid, int rev, u64 funcs)
+ return false;
+ }
+ EXPORT_SYMBOL(acpi_check_dsm);
++
++/**
++ * acpi_check_coherency - check for memory coherency of a device
++ * @handle: ACPI device handle
++ * @val: Pointer to returned value
++ *
++ * Search a device and its parents for a _CCA method and return
++ * its value.
++ */
++acpi_status acpi_check_coherency(acpi_handle handle, int *val)
++{
++ unsigned long long data;
++ acpi_status status;
++
++ do {
++ status = acpi_evaluate_integer(handle, "_CCA", NULL, &data);
++ if (!ACPI_FAILURE(status)) {
++ *val = data;
++ break;
++ }
++ status = acpi_get_parent(handle, &handle);
++ } while (!ACPI_FAILURE(status));
++
++ return status;
++}
++EXPORT_SYMBOL(acpi_check_coherency);
+diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
+index e1b9278..f2e6c9e 100644
+--- a/drivers/ata/Kconfig
++++ b/drivers/ata/Kconfig
+@@ -48,7 +48,7 @@ config ATA_VERBOSE_ERROR
+
+ config ATA_ACPI
+ bool "ATA ACPI Support"
+- depends on ACPI && PCI
++ depends on ACPI
+ default y
+ help
+ This option adds support for ATA-related ACPI objects.
+diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
+index f61ddb9..3499bab 100644
+--- a/drivers/ata/ahci_platform.c
++++ b/drivers/ata/ahci_platform.c
+@@ -20,6 +20,9 @@
+ #include <linux/platform_device.h>
+ #include <linux/libata.h>
+ #include <linux/ahci_platform.h>
++#ifdef CONFIG_ATA_ACPI
++#include <linux/acpi.h>
++#endif
+ #include "ahci.h"
+
+ static const struct ata_port_info ahci_port_info = {
+@@ -87,6 +90,13 @@ static const struct of_device_id ahci_of_match[] = {
+ };
+ MODULE_DEVICE_TABLE(of, ahci_of_match);
+
++#ifdef CONFIG_ATA_ACPI
++static const struct acpi_device_id ahci_acpi_match[] = {
++ { "AMDI0600", 0 }, /* AMD Seattle AHCI */
++ { },
++};
++#endif
++
+ static struct platform_driver ahci_driver = {
+ .probe = ahci_probe,
+ .remove = ata_platform_remove_one,
+@@ -94,6 +104,9 @@ static struct platform_driver ahci_driver = {
+ .name = "ahci",
+ .owner = THIS_MODULE,
+ .of_match_table = ahci_of_match,
++#ifdef CONFIG_ATA_ACPI
++ .acpi_match_table = ACPI_PTR(ahci_acpi_match),
++#endif
+ .pm = &ahci_pm_ops,
+ },
+ };
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
-index bc28111..00e5a0c 100644
+index f03aab1..b02ba9d 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
-@@ -134,7 +134,8 @@ static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
+@@ -28,6 +28,7 @@
+ #include <linux/of_address.h>
+ #include <linux/of_irq.h>
+ #include <linux/phy/phy.h>
++#include <linux/acpi.h>
+ #include "ahci.h"
+
+ /* Max # of disk per a controller */
+@@ -137,7 +138,8 @@ static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
struct xgene_ahci_context *ctx = hpriv->plat_data;
int rc = 0;
@@ -747,165 +3033,445 @@ index bc28111..00e5a0c 100644
xgene_ahci_restart_engine(ap);
rc = ahci_qc_issue(qc);
-diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
-index 4b959e6..c36c7ab55 100644
---- a/drivers/irqchip/irq-gic.c
-+++ b/drivers/irqchip/irq-gic.c
-@@ -381,6 +381,7 @@ static void gic_cpu_init(struct gic_chip_data *gic)
- void __iomem *dist_base = gic_data_dist_base(gic);
- void __iomem *base = gic_data_cpu_base(gic);
- unsigned int cpu_mask, cpu = smp_processor_id();
-+ unsigned int ctrl_mask;
- int i;
+@@ -148,14 +150,6 @@ static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
+ return rc;
+ }
- /*
-@@ -401,13 +402,29 @@ static void gic_cpu_init(struct gic_chip_data *gic)
- gic_cpu_config(dist_base, NULL);
+-static bool xgene_ahci_is_memram_inited(struct xgene_ahci_context *ctx)
+-{
+- void __iomem *diagcsr = ctx->csr_diag;
+-
+- return (readl(diagcsr + CFG_MEM_RAM_SHUTDOWN) == 0 &&
+- readl(diagcsr + BLOCK_MEM_RDY) == 0xFFFFFFFF);
+-}
+-
+ /**
+ * xgene_ahci_read_id - Read ID data from the specified device
+ * @dev: device
+@@ -495,11 +489,6 @@ static int xgene_ahci_probe(struct platform_device *pdev)
+ return -ENODEV;
+ }
- writel_relaxed(0xf0, base + GIC_CPU_PRIMASK);
-- writel_relaxed(1, base + GIC_CPU_CTRL);
-+
-+ ctrl_mask = readl(base + GIC_CPU_CTRL);
-+
-+ /* Mask out the gic v2 bypass bits */
-+ ctrl_mask &= 0x1e0;
+- if (xgene_ahci_is_memram_inited(ctx)) {
+- dev_info(dev, "skip clock and PHY initialization\n");
+- goto skip_clk_phy;
+- }
+-
+ /* Due to errata, HW requires full toggle transition */
+ rc = ahci_platform_enable_clks(hpriv);
+ if (rc)
+@@ -512,7 +501,7 @@ static int xgene_ahci_probe(struct platform_device *pdev)
+
+ /* Configure the host controller */
+ xgene_ahci_hw_init(hpriv);
+-skip_clk_phy:
+
-+ /* Enable group 0 */
-+ ctrl_mask |= 0x1;
-+ writel_relaxed(ctrl_mask, base + GIC_CPU_CTRL);
+ hpriv->flags = AHCI_HFLAG_NO_PMP | AHCI_HFLAG_NO_NCQ;
+
+ rc = ahci_platform_init_host(pdev, hpriv, &xgene_ahci_port_info);
+@@ -527,6 +516,16 @@ disable_resources:
+ return rc;
}
- void gic_cpu_if_down(void)
- {
-+ unsigned int ctrl_mask;
- void __iomem *cpu_base = gic_data_cpu_base(&gic_data[0]);
-- writel_relaxed(0, cpu_base + GIC_CPU_CTRL);
++#ifdef CONFIG_ACPI
++static const struct acpi_device_id xgene_ahci_acpi_match[] = {
++ { "APMC0D00", },
++ { "APMC0D0D", },
++ { "APMC0D09", },
++ { }
++};
++MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match);
++#endif
+
-+ ctrl_mask = readl(cpu_base + GIC_CPU_CTRL);
+ static const struct of_device_id xgene_ahci_of_match[] = {
+ {.compatible = "apm,xgene-ahci"},
+ {},
+@@ -540,6 +539,7 @@ static struct platform_driver xgene_ahci_driver = {
+ .name = "xgene-ahci",
+ .owner = THIS_MODULE,
+ .of_match_table = xgene_ahci_of_match,
++ .acpi_match_table = ACPI_PTR(xgene_ahci_acpi_match),
+ },
+ };
+
+diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
+index 5163ec1..1bec05b 100644
+--- a/drivers/clocksource/arm_arch_timer.c
++++ b/drivers/clocksource/arm_arch_timer.c
+@@ -21,6 +21,7 @@
+ #include <linux/io.h>
+ #include <linux/slab.h>
+ #include <linux/sched_clock.h>
++#include <linux/acpi.h>
+
+ #include <asm/arch_timer.h>
+ #include <asm/virt.h>
+@@ -61,7 +62,8 @@ enum ppi_nr {
+ MAX_TIMER_PPI
+ };
+
+-static int arch_timer_ppi[MAX_TIMER_PPI];
++int arch_timer_ppi[MAX_TIMER_PPI];
++EXPORT_SYMBOL(arch_timer_ppi);
+
+ static struct clock_event_device __percpu *arch_timer_evt;
+
+@@ -338,8 +340,12 @@ arch_timer_detect_rate(void __iomem *cntbase, struct device_node *np)
+ if (arch_timer_rate)
+ return;
+
+- /* Try to determine the frequency from the device tree or CNTFRQ */
+- if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) {
+ /*
-+ * Disable grp enable bit, leave the bypass bits alone as changing
-+ * them could leave the system unstable
++ * Try to determine the frequency from the device tree or CNTFRQ,
++ * if ACPI is enabled, get the frequency from CNTFRQ ONLY.
+ */
-+ ctrl_mask &= 0x1e0;
-+ writel_relaxed(ctrl_mask, cpu_base + GIC_CPU_CTRL);
++ if (!acpi_disabled ||
++ of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) {
+ if (cntbase)
+ arch_timer_rate = readl_relaxed(cntbase + CNTFRQ);
+ else
+@@ -635,20 +641,8 @@ static void __init arch_timer_common_init(void)
+ arch_timer_arch_init();
}
- #ifdef CONFIG_CPU_PM
-@@ -518,6 +535,7 @@ static void gic_cpu_restore(unsigned int gic_nr)
+-static void __init arch_timer_init(struct device_node *np)
++static void __init arch_timer_init(void)
{
- int i;
- u32 *ptr;
-+ unsigned int ctrl_mask;
- void __iomem *dist_base;
- void __iomem *cpu_base;
+- int i;
+-
+- if (arch_timers_present & ARCH_CP15_TIMER) {
+- pr_warn("arch_timer: multiple nodes in dt, skipping\n");
+- return;
+- }
+-
+- arch_timers_present |= ARCH_CP15_TIMER;
+- for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++)
+- arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
+- arch_timer_detect_rate(NULL, np);
+-
+ /*
+ * If HYP mode is available, we know that the physical timer
+ * has been configured to be accessible from PL1. Use it, so
+@@ -667,13 +661,31 @@ static void __init arch_timer_init(struct device_node *np)
+ }
+ }
-@@ -542,7 +560,15 @@ static void gic_cpu_restore(unsigned int gic_nr)
- writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4);
+- arch_timer_c3stop = !of_property_read_bool(np, "always-on");
+-
+ arch_timer_register();
+ arch_timer_common_init();
+ }
+-CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_init);
+-CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_init);
++
++static void __init arch_timer_of_init(struct device_node *np)
++{
++ int i;
++
++ if (arch_timers_present & ARCH_CP15_TIMER) {
++ pr_warn("arch_timer: multiple nodes in dt, skipping\n");
++ return;
++ }
++
++ arch_timers_present |= ARCH_CP15_TIMER;
++ for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++)
++ arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
++
++ arch_timer_detect_rate(NULL, np);
++
++ arch_timer_c3stop = !of_property_read_bool(np, "always-on");
++
++ arch_timer_init();
++}
++CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init);
++CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init);
- writel_relaxed(0xf0, cpu_base + GIC_CPU_PRIMASK);
-- writel_relaxed(1, cpu_base + GIC_CPU_CTRL);
+ static void __init arch_timer_mem_init(struct device_node *np)
+ {
+@@ -740,3 +752,71 @@ static void __init arch_timer_mem_init(struct device_node *np)
+ }
+ CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
+ arch_timer_mem_init);
++
++#ifdef CONFIG_ACPI
++static int __init
++map_generic_timer_interrupt(u32 interrupt, u32 flags)
++{
++ int trigger, polarity;
++
++ if (!interrupt)
++ return 0;
++
++ trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE
++ : ACPI_LEVEL_SENSITIVE;
++
++ polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW
++ : ACPI_ACTIVE_HIGH;
++
++ return acpi_register_gsi(NULL, interrupt, trigger, polarity);
++}
++
++/* Initialize per-processor generic timer */
++static int __init arch_timer_acpi_init(struct acpi_table_header *table)
++{
++ struct acpi_table_gtdt *gtdt;
++
++ if (arch_timers_present & ARCH_CP15_TIMER) {
++ pr_warn("arch_timer: already initialized, skipping\n");
++ return -EINVAL;
++ }
++
++ gtdt = container_of(table, struct acpi_table_gtdt, header);
++
++ arch_timers_present |= ARCH_CP15_TIMER;
+
-+ ctrl_mask = readl(cpu_base + GIC_CPU_CTRL);
++ arch_timer_ppi[PHYS_SECURE_PPI] =
++ map_generic_timer_interrupt(gtdt->secure_el1_interrupt,
++ gtdt->secure_el1_flags);
+
-+ /* Mask out the gic v2 bypass bits */
-+ ctrl_mask &= 0x1e0;
++ arch_timer_ppi[PHYS_NONSECURE_PPI] =
++ map_generic_timer_interrupt(gtdt->non_secure_el1_interrupt,
++ gtdt->non_secure_el1_flags);
+
-+ /* Enable group 0 */
-+ ctrl_mask |= 0x1;
-+ writel_relaxed(ctrl_mask, cpu_base + GIC_CPU_CTRL);
++ arch_timer_ppi[VIRT_PPI] =
++ map_generic_timer_interrupt(gtdt->virtual_timer_interrupt,
++ gtdt->virtual_timer_flags);
++
++ arch_timer_ppi[HYP_PPI] =
++ map_generic_timer_interrupt(gtdt->non_secure_el2_interrupt,
++ gtdt->non_secure_el2_flags);
++
++ /* Get the frequency from CNTFRQ */
++ arch_timer_detect_rate(NULL, NULL);
++
++ /* Always-on capability */
++ arch_timer_c3stop = !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON);
++
++ arch_timer_init();
++ return 0;
++}
++
++/* Initialize all the generic timers presented in GTDT */
++void __init acpi_generic_timer_init(void)
++{
++ if (acpi_disabled)
++ return;
++
++ acpi_table_parse(ACPI_SIG_GTDT, arch_timer_acpi_init);
++}
++#endif
+diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
+index a0698b4..d2da911 100644
+--- a/drivers/irqchip/irq-gic-v3.c
++++ b/drivers/irqchip/irq-gic-v3.c
+@@ -490,9 +490,19 @@ static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
+ isb();
}
- static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v)
-diff --git a/drivers/of/address.c b/drivers/of/address.c
-index e371825..5eaadae 100644
---- a/drivers/of/address.c
-+++ b/drivers/of/address.c
-@@ -5,6 +5,7 @@
- #include <linux/module.h>
++#ifdef CONFIG_ARM_PARKING_PROTOCOL
++static void gic_wakeup_parked_cpu(int cpu)
++{
++ gic_raise_softirq(cpumask_of(cpu), 0);
++}
++#endif
++
+ static void gic_smp_init(void)
+ {
+ set_smp_cross_call(gic_raise_softirq);
++#ifdef CONFIG_ARM_PARKING_PROTOCOL
++ set_smp_boot_wakeup_call(gic_wakeup_parked_cpu);
++#endif
+ register_cpu_notifier(&gic_cpu_notifier);
+ }
+
+diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
+index dda6dbc..5d9bdd3 100644
+--- a/drivers/irqchip/irq-gic.c
++++ b/drivers/irqchip/irq-gic.c
+@@ -33,12 +33,14 @@
+ #include <linux/of.h>
#include <linux/of_address.h>
- #include <linux/pci_regs.h>
-+#include <linux/slab.h>
- #include <linux/string.h>
+ #include <linux/of_irq.h>
++#include <linux/acpi.h>
+ #include <linux/irqdomain.h>
+ #include <linux/interrupt.h>
+ #include <linux/percpu.h>
+ #include <linux/slab.h>
+ #include <linux/irqchip/chained_irq.h>
+ #include <linux/irqchip/arm-gic.h>
++#include <linux/irqchip/arm-gic-acpi.h>
- /* Max address size we deal with */
-@@ -601,12 +602,72 @@ const __be32 *of_get_address(struct device_node *dev, int index, u64 *size,
+ #include <asm/cputype.h>
+ #include <asm/irq.h>
+@@ -622,6 +624,13 @@ static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
+
+ raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
}
- EXPORT_SYMBOL(of_get_address);
++
++#ifdef CONFIG_ARM_PARKING_PROTOCOL
++static void gic_wakeup_parked_cpu(int cpu)
++{
++ gic_raise_softirq(cpumask_of(cpu), GIC_DIST_SOFTINT_NSATT);
++}
++#endif
+ #endif
-+struct io_range {
-+ struct list_head list;
-+ phys_addr_t start;
-+ resource_size_t size;
-+};
+ #ifdef CONFIG_BL_SWITCHER
+@@ -977,6 +986,9 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
+ #ifdef CONFIG_SMP
+ set_smp_cross_call(gic_raise_softirq);
+ register_cpu_notifier(&gic_cpu_notifier);
++#ifdef CONFIG_ARM_PARKING_PROTOCOL
++ set_smp_boot_wakeup_call(gic_wakeup_parked_cpu);
++#endif
+ #endif
+ set_handle_irq(gic_handle_irq);
+ }
+@@ -1029,3 +1041,107 @@ IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
+ IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
+
+ #endif
+
-+static LIST_HEAD(io_range_list);
++#ifdef CONFIG_ACPI
++static phys_addr_t dist_phy_base, cpu_phy_base;
++static int cpu_base_assigned;
+
-+/*
-+ * Record the PCI IO range (expressed as CPU physical address + size).
-+ * Return a negative value if an error has occured, zero otherwise
-+ */
-+int __weak pci_register_io_range(phys_addr_t addr, resource_size_t size)
++static int __init
++gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
++ const unsigned long end)
+{
-+#ifdef PCI_IOBASE
-+ struct io_range *res;
-+ resource_size_t allocated_size = 0;
++ struct acpi_madt_generic_interrupt *processor;
++ phys_addr_t gic_cpu_base;
+
-+ /* check if the range hasn't been previously recorded */
-+ list_for_each_entry(res, &io_range_list, list) {
-+ if (addr >= res->start && addr + size <= res->start + size)
-+ return 0;
-+ allocated_size += res->size;
-+ }
++ processor = (struct acpi_madt_generic_interrupt *)header;
+
-+ /* range not registed yet, check for available space */
-+ if (allocated_size + size - 1 > IO_SPACE_LIMIT)
-+ return -E2BIG;
++ if (BAD_MADT_ENTRY(processor, end))
++ return -EINVAL;
+
-+ /* add the range to the list */
-+ res = kzalloc(sizeof(*res), GFP_KERNEL);
-+ if (!res)
-+ return -ENOMEM;
++ /*
++ * There is no support for non-banked GICv1/2 register in ACPI spec.
++ * All CPU interface addresses have to be the same.
++ */
++ gic_cpu_base = processor->base_address;
++ if (cpu_base_assigned && gic_cpu_base != cpu_phy_base)
++ return -EFAULT;
+
-+ res->start = addr;
-+ res->size = size;
++ cpu_phy_base = gic_cpu_base;
++ cpu_base_assigned = 1;
++ return 0;
++}
++
++static int __init
++gic_acpi_parse_madt_distributor(struct acpi_subtable_header *header,
++ const unsigned long end)
++{
++ struct acpi_madt_generic_distributor *dist;
+
-+ list_add_tail(&res->list, &io_range_list);
++ dist = (struct acpi_madt_generic_distributor *)header;
+
++ if (BAD_MADT_ENTRY(dist, end))
++ return -EINVAL;
++
++ dist_phy_base = dist->base_address;
+ return 0;
-+#else
-+ return -EINVAL;
-+#endif
+}
+
- unsigned long __weak pci_address_to_pio(phys_addr_t address)
- {
-+#ifdef PCI_IOBASE
-+ struct io_range *res;
-+ resource_size_t offset = 0;
++int __init
++gic_v2_acpi_init(struct acpi_table_header *table)
++{
++ void __iomem *cpu_base, *dist_base;
++ int count;
++
++ /* Collect CPU base addresses */
++ count = acpi_parse_entries(sizeof(struct acpi_table_madt),
++ gic_acpi_parse_madt_cpu, table,
++ ACPI_MADT_TYPE_GENERIC_INTERRUPT, 0);
++ if (count < 0) {
++ pr_err("Error during GICC entries parsing\n");
++ return -EFAULT;
++ } else if (!count) {
++ pr_err("No valid GICC entries exist\n");
++ return -EINVAL;
++ }
+
-+ list_for_each_entry(res, &io_range_list, list) {
-+ if (address >= res->start &&
-+ address < res->start + res->size) {
-+ return res->start - address + offset;
-+ }
-+ offset += res->size;
++ /*
++ * Find distributor base address. We expect one distributor entry since
++ * ACPI 5.1 spec neither support multi-GIC instances nor GIC cascade.
++ */
++ count = acpi_parse_entries(sizeof(struct acpi_table_madt),
++ gic_acpi_parse_madt_distributor, table,
++ ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR, 0);
++ if (count <= 0) {
++ pr_err("Error during GICD entries parsing\n");
++ return -EFAULT;
++ } else if (!count) {
++ pr_err("No valid GICD entries exist\n");
++ return -EINVAL;
++ } else if (count > 1) {
++ pr_err("More than one GICD entry detected\n");
++ return -EINVAL;
+ }
+
-+ return (unsigned long)-1;
-+#else
- if (address > IO_SPACE_LIMIT)
- return (unsigned long)-1;
-
- return (unsigned long) address;
++ cpu_base = ioremap(cpu_phy_base, ACPI_GIC_CPU_IF_MEM_SIZE);
++ if (!cpu_base) {
++ pr_err("Unable to map GICC registers\n");
++ return -ENOMEM;
++ }
++
++ dist_base = ioremap(dist_phy_base, ACPI_GICV2_DIST_MEM_SIZE);
++ if (!dist_base) {
++ pr_err("Unable to map GICD registers\n");
++ iounmap(cpu_base);
++ return -ENOMEM;
++ }
++
++ /*
++ * Initialize zero GIC instance (no multi-GIC support). Also, set GIC
++ * as default IRQ domain to allow for GSI registration and GSI to IRQ
++ * number translation (see acpi_register_gsi() and acpi_gsi_to_irq()).
++ */
++ gic_init_bases(0, -1, dist_base, cpu_base, 0, NULL);
++ irq_set_default_host(gic_data[0].domain);
++ return 0;
++}
+#endif
+diff --git a/drivers/irqchip/irqchip.c b/drivers/irqchip/irqchip.c
+index 0fe2f71..9106c6d 100644
+--- a/drivers/irqchip/irqchip.c
++++ b/drivers/irqchip/irqchip.c
+@@ -11,6 +11,7 @@
+ #include <linux/init.h>
+ #include <linux/of_irq.h>
+ #include <linux/irqchip.h>
++#include <linux/irqchip/arm-gic-acpi.h>
+
+ /*
+ * This special of_device_id is the sentinel at the end of the
+@@ -26,4 +27,6 @@ extern struct of_device_id __irqchip_of_table[];
+ void __init irqchip_init(void)
+ {
+ of_irq_init(__irqchip_of_table);
++
++ acpi_gic_init();
}
+diff --git a/drivers/of/address.c b/drivers/of/address.c
+index e371825..afdb782 100644
+--- a/drivers/of/address.c
++++ b/drivers/of/address.c
+@@ -5,6 +5,8 @@
+ #include <linux/module.h>
+ #include <linux/of_address.h>
+ #include <linux/pci_regs.h>
++#include <linux/sizes.h>
++#include <linux/slab.h>
+ #include <linux/string.h>
- static int __of_address_to_resource(struct device_node *dev,
-@@ -847,3 +908,50 @@ bool of_dma_is_coherent(struct device_node *np)
- return false;
+ /* Max address size we deal with */
+@@ -293,6 +295,51 @@ struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser,
}
- EXPORT_SYMBOL_GPL(of_dma_is_coherent);
-+
+ EXPORT_SYMBOL_GPL(of_pci_range_parser_one);
+
+/*
+ * of_pci_range_to_resource - Create a resource from an of_pci_range
+ * @range: the PCI range that describes the resource
@@ -922,7 +3488,7 @@ index e371825..5eaadae 100644
+ * If that fails we know that pci_address_to_pio() will do too.
+ */
+int of_pci_range_to_resource(struct of_pci_range *range,
-+ struct device_node *np, struct resource *res)
++ struct device_node *np, struct resource *res)
+{
+ int err;
+ res->flags = range->flags;
@@ -930,7 +3496,7 @@ index e371825..5eaadae 100644
+ res->name = np->full_name;
+
+ if (res->flags & IORESOURCE_IO) {
-+ unsigned long port = -1;
++ unsigned long port;
+ err = pci_register_io_range(range->cpu_addr, range->size);
+ if (err)
+ goto invalid_range;
@@ -951,61 +3517,242 @@ index e371825..5eaadae 100644
+ res->end = (resource_size_t)OF_BAD_ADDR;
+ return err;
+}
+ #endif /* CONFIG_PCI */
+
+ /*
+@@ -601,12 +648,119 @@ const __be32 *of_get_address(struct device_node *dev, int index, u64 *size,
+ }
+ EXPORT_SYMBOL(of_get_address);
+
++#ifdef PCI_IOBASE
++struct io_range {
++ struct list_head list;
++ phys_addr_t start;
++ resource_size_t size;
++};
+
++static LIST_HEAD(io_range_list);
++static DEFINE_SPINLOCK(io_range_lock);
++#endif
++
++/*
++ * Record the PCI IO range (expressed as CPU physical address + size).
++ * Return a negative value if an error has occured, zero otherwise
++ */
++int __weak pci_register_io_range(phys_addr_t addr, resource_size_t size)
++{
++ int err = 0;
++
++#ifdef PCI_IOBASE
++ struct io_range *range;
++ resource_size_t allocated_size = 0;
++
++ /* check if the range hasn't been previously recorded */
++ spin_lock(&io_range_lock);
++ list_for_each_entry(range, &io_range_list, list) {
++ if (addr >= range->start && addr + size <= range->start + size) {
++ /* range already registered, bail out */
++ goto end_register;
++ }
++ allocated_size += range->size;
++ }
++
++ /* range not registed yet, check for available space */
++ if (allocated_size + size - 1 > IO_SPACE_LIMIT) {
++ /* if it's too big check if 64K space can be reserved */
++ if (allocated_size + SZ_64K - 1 > IO_SPACE_LIMIT) {
++ err = -E2BIG;
++ goto end_register;
++ }
++
++ size = SZ_64K;
++ pr_warn("Requested IO range too big, new size set to 64K\n");
++ }
++
++ /* add the range to the list */
++ range = kzalloc(sizeof(*range), GFP_KERNEL);
++ if (!range) {
++ err = -ENOMEM;
++ goto end_register;
++ }
++
++ range->start = addr;
++ range->size = size;
++
++ list_add_tail(&range->list, &io_range_list);
++
++end_register:
++ spin_unlock(&io_range_lock);
++#endif
++
++ return err;
++}
++
++phys_addr_t pci_pio_to_address(unsigned long pio)
++{
++ phys_addr_t address = (phys_addr_t)OF_BAD_ADDR;
++
++#ifdef PCI_IOBASE
++ struct io_range *range;
++ resource_size_t allocated_size = 0;
++
++ if (pio > IO_SPACE_LIMIT)
++ return address;
++
++ spin_lock(&io_range_lock);
++ list_for_each_entry(range, &io_range_list, list) {
++ if (pio >= allocated_size && pio < allocated_size + range->size) {
++ address = range->start + pio - allocated_size;
++ break;
++ }
++ allocated_size += range->size;
++ }
++ spin_unlock(&io_range_lock);
++#endif
++
++ return address;
++}
++
+ unsigned long __weak pci_address_to_pio(phys_addr_t address)
+ {
++#ifdef PCI_IOBASE
++ struct io_range *res;
++ resource_size_t offset = 0;
++ unsigned long addr = -1;
++
++ spin_lock(&io_range_lock);
++ list_for_each_entry(res, &io_range_list, list) {
++ if (address >= res->start && address < res->start + res->size) {
++ addr = res->start - address + offset;
++ break;
++ }
++ offset += res->size;
++ }
++ spin_unlock(&io_range_lock);
++
++ return addr;
++#else
+ if (address > IO_SPACE_LIMIT)
+ return (unsigned long)-1;
+
+ return (unsigned long) address;
++#endif
+ }
+
+ static int __of_address_to_resource(struct device_node *dev,
diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
-index 8481996..e81402a 100644
+index 8481996..8882b46 100644
--- a/drivers/of/of_pci.c
+++ b/drivers/of/of_pci.c
-@@ -1,6 +1,7 @@
+@@ -1,7 +1,9 @@
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_pci.h>
++#include <linux/slab.h>
static inline int __of_pci_pci_compare(struct device_node *node,
-@@ -89,6 +90,141 @@ int of_pci_parse_bus_range(struct device_node *node, struct resource *res)
+ unsigned int data)
+@@ -89,6 +91,146 @@ int of_pci_parse_bus_range(struct device_node *node, struct resource *res)
}
EXPORT_SYMBOL_GPL(of_pci_parse_bus_range);
+/**
-+ * pci_host_bridge_of_get_ranges - Parse PCI host bridge resources from DT
++ * This function will try to obtain the host bridge domain number by
++ * finding a property called "linux,pci-domain" of the given device node.
++ *
++ * @node: device tree node with the domain information
++ *
++ * Returns the associated domain number from DT in the range [0-0xffff], or
++ * a negative value if the required property is not found.
++ */
++int of_get_pci_domain_nr(struct device_node *node)
++{
++ const __be32 *value;
++ int len;
++ u16 domain;
++
++ value = of_get_property(node, "linux,pci-domain", &len);
++ if (!value || len < sizeof(*value))
++ return -EINVAL;
++
++ domain = (u16)be32_to_cpup(value);
++
++ return domain;
++}
++EXPORT_SYMBOL_GPL(of_get_pci_domain_nr);
++
++#if defined(CONFIG_OF_ADDRESS)
++/**
++ * of_pci_get_host_bridge_resources - Parse PCI host bridge resources from DT
+ * @dev: device node of the host bridge having the range property
++ * @busno: bus number associated with the bridge root bus
++ * @bus_max: maximum number of buses for this bridge
+ * @resources: list where the range of resources will be added after DT parsing
-+ * @io_base: pointer to a variable that will contain the physical address for
-+ * the start of the I/O range.
++ * @io_base: pointer to a variable that will contain on return the physical
++ * address for the start of the I/O range. Can be NULL if the caller doesn't
++ * expect IO ranges to be present in the device tree.
+ *
-+ * It is the callers job to free the @resources list if an error is returned.
++ * It is the caller's job to free the @resources list.
+ *
+ * This function will parse the "ranges" property of a PCI host bridge device
+ * node and setup the resource mapping based on its content. It is expected
+ * that the property conforms with the Power ePAPR document.
+ *
-+ * Each architecture is then offered the chance of applying their own
-+ * filtering of pci_host_bridge_windows based on their own restrictions by
-+ * calling pcibios_fixup_bridge_ranges(). The filtered list of windows
-+ * can then be used when creating a pci_host_bridge structure.
++ * It returns zero if the range parsing has been successful or a standard error
++ * value if it failed.
+ */
-+static int pci_host_bridge_of_get_ranges(struct device_node *dev,
-+ struct list_head *resources, resource_size_t *io_base)
++int of_pci_get_host_bridge_resources(struct device_node *dev,
++ unsigned char busno, unsigned char bus_max,
++ struct list_head *resources, resource_size_t *io_base)
+{
+ struct resource *res;
++ struct resource *bus_range;
+ struct of_pci_range range;
+ struct of_pci_range_parser parser;
++ char range_type[4];
+ int err;
+
++ if (io_base)
++ *io_base = (resource_size_t)OF_BAD_ADDR;
++
++ bus_range = kzalloc(sizeof(*bus_range), GFP_KERNEL);
++ if (!bus_range)
++ return -ENOMEM;
++
+ pr_info("PCI host bridge %s ranges:\n", dev->full_name);
+
++ err = of_pci_parse_bus_range(dev, bus_range);
++ if (err) {
++ bus_range->start = busno;
++ bus_range->end = bus_max;
++ bus_range->flags = IORESOURCE_BUS;
++ pr_info(" No bus range found for %s, using %pR\n",
++ dev->full_name, bus_range);
++ } else {
++ if (bus_range->end > bus_range->start + bus_max)
++ bus_range->end = bus_range->start + bus_max;
++ }
++ pci_add_resource(resources, bus_range);
++
+ /* Check for ranges property */
+ err = of_pci_range_parser_init(&parser, dev);
+ if (err)
-+ return err;
++ goto parse_failed;
+
+ pr_debug("Parsing ranges property...\n");
+ for_each_of_pci_range(&parser, &range) {
+ /* Read next ranges element */
-+ pr_debug("pci_space: 0x%08x pci_addr:0x%016llx cpu_addr:0x%016llx size:0x%016llx\n",
-+ range.pci_space, range.pci_addr, range.cpu_addr, range.size);
++ if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_IO)
++ snprintf(range_type, 4, " IO");
++ else if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_MEM)
++ snprintf(range_type, 4, "MEM");
++ else
++ snprintf(range_type, 4, "err");
++ pr_info(" %s %#010llx..%#010llx -> %#010llx\n", range_type,
++ range.cpu_addr, range.cpu_addr + range.size - 1,
++ range.pci_addr);
+
+ /*
+ * If we failed translation or got a zero-sized region
@@ -1015,140 +3762,50 @@ index 8481996..e81402a 100644
+ continue;
+
+ res = kzalloc(sizeof(struct resource), GFP_KERNEL);
-+ if (!res)
-+ return -ENOMEM;
++ if (!res) {
++ err = -ENOMEM;
++ goto parse_failed;
++ }
+
+ err = of_pci_range_to_resource(&range, dev, res);
+ if (err)
-+ return err;
-+
-+ if (resource_type(res) == IORESOURCE_IO)
++ goto conversion_failed;
++
++ if (resource_type(res) == IORESOURCE_IO) {
++ if (!io_base) {
++ pr_err("I/O range found for %s. Please provide an io_base pointer to save CPU base address\n",
++ dev->full_name);
++ err = -EINVAL;
++ goto conversion_failed;
++ }
++ if (*io_base != (resource_size_t)OF_BAD_ADDR)
++ pr_warn("More than one I/O resource converted for %s. CPU base address for old range lost!\n",
++ dev->full_name);
+ *io_base = range.cpu_addr;
++ }
+
-+ pci_add_resource_offset(resources, res,
-+ res->start - range.pci_addr);
-+ }
-+
-+ /* Apply architecture specific fixups for the ranges */
-+ return pcibios_fixup_bridge_ranges(resources);
-+}
-+
-+static atomic_t domain_nr = ATOMIC_INIT(-1);
-+
-+/**
-+ * of_create_pci_host_bridge - Create a PCI host bridge structure using
-+ * information passed in the DT.
-+ * @parent: device owning this host bridge
-+ * @ops: pci_ops associated with the host controller
-+ * @host_data: opaque data structure used by the host controller.
-+ *
-+ * returns a pointer to the newly created pci_host_bridge structure, or
-+ * NULL if the call failed.
-+ *
-+ * This function will try to obtain the host bridge domain number by
-+ * using of_alias_get_id() call with "pci-domain" as a stem. If that
-+ * fails, a local allocator will be used that will put each host bridge
-+ * in a new domain.
-+ */
-+struct pci_host_bridge *
-+of_create_pci_host_bridge(struct device *parent, struct pci_ops *ops, void *host_data)
-+{
-+ int err, domain, busno;
-+ struct resource *bus_range;
-+ struct pci_bus *root_bus;
-+ struct pci_host_bridge *bridge;
-+ resource_size_t io_base = 0;
-+ LIST_HEAD(res);
-+
-+ bus_range = kzalloc(sizeof(*bus_range), GFP_KERNEL);
-+ if (!bus_range)
-+ return ERR_PTR(-ENOMEM);
-+
-+ domain = of_alias_get_id(parent->of_node, "pci-domain");
-+ if (domain == -ENODEV)
-+ domain = atomic_inc_return(&domain_nr);
-+
-+ err = of_pci_parse_bus_range(parent->of_node, bus_range);
-+ if (err) {
-+ dev_info(parent, "No bus range for %s, using default [0-255]\n",
-+ parent->of_node->full_name);
-+ bus_range->start = 0;
-+ bus_range->end = 255;
-+ bus_range->flags = IORESOURCE_BUS;
-+ }
-+ busno = bus_range->start;
-+ pci_add_resource(&res, bus_range);
-+
-+ /* now parse the rest of host bridge bus ranges */
-+ err = pci_host_bridge_of_get_ranges(parent->of_node, &res, &io_base);
-+ if (err)
-+ goto err_create;
-+
-+ /* then create the root bus */
-+ root_bus = pci_create_root_bus_in_domain(parent, domain, busno,
-+ ops, host_data, &res);
-+ if (IS_ERR(root_bus)) {
-+ err = PTR_ERR(root_bus);
-+ goto err_create;
++ pci_add_resource_offset(resources, res, res->start - range.pci_addr);
+ }
+
-+ bridge = to_pci_host_bridge(root_bus->bridge);
-+ bridge->io_base = io_base;
-+
-+ return bridge;
++ return 0;
+
-+err_create:
-+ pci_free_resource_list(&res);
-+ return ERR_PTR(err);
++conversion_failed:
++ kfree(res);
++parse_failed:
++ pci_free_resource_list(resources);
++ return err;
+}
-+EXPORT_SYMBOL_GPL(of_create_pci_host_bridge);
++EXPORT_SYMBOL_GPL(of_pci_get_host_bridge_resources);
++#endif /* CONFIG_OF_ADDRESS */
+
#ifdef CONFIG_PCI_MSI
static LIST_HEAD(of_pci_msi_chip_list);
-diff --git a/drivers/pci/host-bridge.c b/drivers/pci/host-bridge.c
-index 0e5f3c9..54ceafd 100644
---- a/drivers/pci/host-bridge.c
-+++ b/drivers/pci/host-bridge.c
-@@ -16,12 +16,13 @@ static struct pci_bus *find_pci_root_bus(struct pci_bus *bus)
- return bus;
- }
-
--static struct pci_host_bridge *find_pci_host_bridge(struct pci_bus *bus)
-+struct pci_host_bridge *find_pci_host_bridge(struct pci_bus *bus)
- {
- struct pci_bus *root_bus = find_pci_root_bus(bus);
-
- return to_pci_host_bridge(root_bus->bridge);
- }
-+EXPORT_SYMBOL_GPL(find_pci_host_bridge);
-
- void pci_set_host_bridge_release(struct pci_host_bridge *bridge,
- void (*release_fn)(struct pci_host_bridge *),
-@@ -82,3 +83,18 @@ void pcibios_bus_to_resource(struct pci_bus *bus, struct resource *res,
- res->end = region->end + offset;
- }
- EXPORT_SYMBOL(pcibios_bus_to_resource);
-+
-+/**
-+ * Simple version of the platform specific code for filtering the list
-+ * of resources obtained from the ranges declaration in DT.
-+ *
-+ * Platforms can override this function in order to impose stronger
-+ * constraints onto the list of resources that a host bridge can use.
-+ * The filtered list will then be used to create a root bus and associate
-+ * it with the host bridge.
-+ *
-+ */
-+int __weak pcibios_fixup_bridge_ranges(struct list_head *resources)
-+{
-+ return 0;
-+}
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
-index 2d8a4d0..e17a28e 100644
+index 90f5cca..382fd3d 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
-@@ -54,4 +54,14 @@ config PCIE_SPEAR13XX
+@@ -63,4 +63,14 @@ config PCIE_SPEAR13XX
help
Say Y here if you want PCIe support on SPEAr13XX SoCs.
@@ -1164,24 +3821,72 @@ index 2d8a4d0..e17a28e 100644
+
endmenu
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
-index 0daec79..7600482 100644
+index d0e88f1..845611f 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
-@@ -7,3 +7,4 @@ obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
+@@ -8,3 +8,4 @@ obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
obj-$(CONFIG_PCI_RCAR_GEN2_PCIE) += pcie-rcar.o
obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
+obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
+diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
+index 0fb0fdb..946935d 100644
+--- a/drivers/pci/host/pci-tegra.c
++++ b/drivers/pci/host/pci-tegra.c
+@@ -626,13 +626,14 @@ DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable);
+ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
+ {
+ struct tegra_pcie *pcie = sys_to_pcie(sys);
++ phys_addr_t io_start = pci_pio_to_address(pcie->io.start);
+
+ pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, &pcie->prefetch,
+ sys->mem_offset);
+ pci_add_resource(&sys->resources, &pcie->busn);
+
+- pci_ioremap_io(nr * SZ_64K, pcie->io.start);
++ pci_ioremap_io(nr * SZ_64K, io_start);
+
+ return 1;
+ }
+@@ -737,6 +738,7 @@ static irqreturn_t tegra_pcie_isr(int irq, void *arg)
+ static void tegra_pcie_setup_translations(struct tegra_pcie *pcie)
+ {
+ u32 fpci_bar, size, axi_address;
++ phys_addr_t io_start = pci_pio_to_address(pcie->io.start);
+
+ /* Bar 0: type 1 extended configuration space */
+ fpci_bar = 0xfe100000;
+@@ -749,7 +751,7 @@ static void tegra_pcie_setup_translations(struct tegra_pcie *pcie)
+ /* Bar 1: downstream IO bar */
+ fpci_bar = 0xfdfc0000;
+ size = resource_size(&pcie->io);
+- axi_address = pcie->io.start;
++ axi_address = io_start;
+ afi_writel(pcie, axi_address, AFI_AXI_BAR1_START);
+ afi_writel(pcie, size >> 12, AFI_AXI_BAR1_SZ);
+ afi_writel(pcie, fpci_bar, AFI_FPCI_BAR1);
+@@ -1520,7 +1522,9 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
+ }
+
+ for_each_of_pci_range(&parser, &range) {
+- of_pci_range_to_resource(&range, np, &res);
++ err = of_pci_range_to_resource(&range, np, &res);
++ if (err < 0)
++ return err;
+
+ switch (res.flags & IORESOURCE_TYPE_BITS) {
+ case IORESOURCE_IO:
diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c
new file mode 100644
-index 0000000..7bf4ac7
+index 0000000..dae61a6
--- /dev/null
+++ b/drivers/pci/host/pci-xgene.c
-@@ -0,0 +1,725 @@
+@@ -0,0 +1,646 @@
+/**
+ * APM X-Gene PCIe Driver
+ *
-+ * Copyright (c) 2013 Applied Micro Circuits Corporation.
++ * Copyright (c) 2014 Applied Micro Circuits Corporation.
+ *
+ * Author: Tanmay Inamdar <tinamdar@apm.com>.
+ *
@@ -1210,9 +3915,7 @@ index 0000000..7bf4ac7
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
-+#define PCIECORE_LTSSM 0x4c
+#define PCIECORE_CTLANDSTATUS 0x50
-+#define INTXSTATUSMASK 0x6c
+#define PIM1_1L 0x80
+#define IBAR2 0x98
+#define IR2MSK 0x9c
@@ -1227,37 +3930,16 @@ index 0000000..7bf4ac7
+#define CFGBARH 0x158
+#define CFGCTL 0x15c
+#define RTDID 0x160
-+#define BRIDGE_CFG_0 0x2000
-+#define BRIDGE_CFG_1 0x2004
+#define BRIDGE_CFG_4 0x2010
-+#define BRIDGE_CFG_32 0x2030
-+#define BRIDGE_CFG_14 0x2038
-+#define BRIDGE_CTRL_1 0x2204
-+#define BRIDGE_CTRL_2 0x2208
-+#define BRIDGE_CTRL_5 0x2214
+#define BRIDGE_STATUS_0 0x2600
-+#define MEM_RAM_SHUTDOWN 0xd070
-+#define BLOCK_MEM_RDY 0xd074
+
-+#define DEVICE_PORT_TYPE_MASK 0x03c00000
-+#define PM_FORCE_RP_MODE_MASK 0x00000400
-+#define SWITCH_PORT_MODE_MASK 0x00000800
-+#define CLASS_CODE_MASK 0xffffff00
+#define LINK_UP_MASK 0x00000100
-+#define AER_OPTIONAL_ERROR_EN 0xffc00000
-+#define XGENE_PCIE_DEV_CTRL 0x2f0f
+#define AXI_EP_CFG_ACCESS 0x10000
-+#define ENABLE_ASPM 0x08000000
-+#define XGENE_PORT_TYPE_RC 0x05000000
-+#define BLOCK_MEM_RDY_VAL 0xFFFFFFFF
+#define EN_COHERENCY 0xF0000000
+#define EN_REG 0x00000001
+#define OB_LO_IO 0x00000002
-+#define XGENE_PCIE_VENDORID 0xE008
++#define XGENE_PCIE_VENDORID 0x10E8
+#define XGENE_PCIE_DEVICEID 0xE004
-+#define XGENE_PCIE_ECC_TIMEOUT 10 /* ms */
-+#define XGENE_LTSSM_DETECT_WAIT 20 /* ms */
-+#define XGENE_LTSSM_L0_WAIT 4 /* ms */
+#define SZ_1T (SZ_1G*1024ULL)
+#define PIPE_PHY_RATE_RD(src) ((0xc000 & (u32)(src)) >> 0xe)
+
@@ -1267,7 +3949,8 @@ index 0000000..7bf4ac7
+ struct clk *clk;
+ void __iomem *csr_base;
+ void __iomem *cfg_base;
-+ u8 link_up;
++ unsigned long cfg_addr;
++ bool link_up;
+};
+
+static inline u32 pcie_bar_low_val(u32 addr, u32 flags)
@@ -1444,6 +4127,7 @@ index 0000000..7bf4ac7
+ xgene_pcie_cfg_out32(addr, offset, val);
+ break;
+ }
++
+ return PCIBIOS_SUCCESSFUL;
+}
+
@@ -1452,19 +4136,6 @@ index 0000000..7bf4ac7
+ .write = xgene_pcie_write_config
+};
+
-+static void xgene_pcie_program_core(void __iomem *csr_base)
-+{
-+ u32 val;
-+
-+ val = readl(csr_base + BRIDGE_CFG_0);
-+ val |= AER_OPTIONAL_ERROR_EN;
-+ writel(val, csr_base + BRIDGE_CFG_0);
-+ writel(0x0, csr_base + INTXSTATUSMASK);
-+ val = readl(csr_base + BRIDGE_CTRL_1);
-+ val = (val & ~0xffff) | XGENE_PCIE_DEV_CTRL;
-+ writel(val, csr_base + BRIDGE_CTRL_1);
-+}
-+
+static u64 xgene_pcie_set_ib_mask(void __iomem *csr_base, u32 addr,
+ u32 flags, u64 size)
+{
@@ -1491,86 +4162,22 @@ index 0000000..7bf4ac7
+ return mask;
+}
+
-+static void xgene_pcie_poll_linkup(struct xgene_pcie_port *port,
++static void xgene_pcie_linkup(struct xgene_pcie_port *port,
+ u32 *lanes, u32 *speed)
+{
+ void __iomem *csr_base = port->csr_base;
-+ ulong timeout;
+ u32 val32;
+
-+ /*
-+ * A component enters the LTSSM Detect state within
-+ * 20ms of the end of fundamental core reset.
-+ */
-+ msleep(XGENE_LTSSM_DETECT_WAIT);
-+ port->link_up = 0;
-+ timeout = jiffies + msecs_to_jiffies(XGENE_LTSSM_L0_WAIT);
-+ while (time_before(jiffies, timeout)) {
-+ val32 = readl(csr_base + PCIECORE_CTLANDSTATUS);
-+ if (val32 & LINK_UP_MASK) {
-+ port->link_up = 1;
-+ *speed = PIPE_PHY_RATE_RD(val32);
-+ val32 = readl(csr_base + BRIDGE_STATUS_0);
-+ *lanes = val32 >> 26;
-+ break;
-+ }
-+ msleep(1);
++ port->link_up = false;
++ val32 = readl(csr_base + PCIECORE_CTLANDSTATUS);
++ if (val32 & LINK_UP_MASK) {
++ port->link_up = true;
++ *speed = PIPE_PHY_RATE_RD(val32);
++ val32 = readl(csr_base + BRIDGE_STATUS_0);
++ *lanes = val32 >> 26;
+ }
+}
+
-+static void xgene_pcie_setup_root_complex(struct xgene_pcie_port *port)
-+{
-+ void __iomem *csr_base = port->csr_base;
-+ u32 val;
-+
-+ val = (XGENE_PCIE_DEVICEID << 16) | XGENE_PCIE_VENDORID;
-+ writel(val, csr_base + BRIDGE_CFG_0);
-+
-+ val = readl(csr_base + BRIDGE_CFG_1);
-+ val &= ~CLASS_CODE_MASK;
-+ val |= PCI_CLASS_BRIDGE_PCI << 16;
-+ writel(val, csr_base + BRIDGE_CFG_1);
-+
-+ val = readl(csr_base + BRIDGE_CFG_14);
-+ val |= SWITCH_PORT_MODE_MASK;
-+ val &= ~PM_FORCE_RP_MODE_MASK;
-+ writel(val, csr_base + BRIDGE_CFG_14);
-+
-+ val = readl(csr_base + BRIDGE_CTRL_5);
-+ val &= ~DEVICE_PORT_TYPE_MASK;
-+ val |= XGENE_PORT_TYPE_RC;
-+ writel(val, csr_base + BRIDGE_CTRL_5);
-+
-+ val = readl(csr_base + BRIDGE_CTRL_2);
-+ val |= ENABLE_ASPM;
-+ writel(val, csr_base + BRIDGE_CTRL_2);
-+
-+ val = readl(csr_base + BRIDGE_CFG_32);
-+ writel(val | (1 << 19), csr_base + BRIDGE_CFG_32);
-+}
-+
-+/* Return 0 on success */
-+static int xgene_pcie_init_ecc(struct xgene_pcie_port *port)
-+{
-+ void __iomem *csr_base = port->csr_base;
-+ ulong timeout;
-+ u32 val;
-+
-+ val = readl(csr_base + MEM_RAM_SHUTDOWN);
-+ if (!val)
-+ return 0;
-+ writel(0x0, csr_base + MEM_RAM_SHUTDOWN);
-+ timeout = jiffies + msecs_to_jiffies(XGENE_PCIE_ECC_TIMEOUT);
-+ while (time_before(jiffies, timeout)) {
-+ val = readl(csr_base + BLOCK_MEM_RDY);
-+ if (val == BLOCK_MEM_RDY_VAL)
-+ return 0;
-+ msleep(1);
-+ }
-+
-+ return 1;
-+}
-+
+static int xgene_pcie_init_port(struct xgene_pcie_port *port)
+{
+ int rc;
@@ -1587,12 +4194,6 @@ index 0000000..7bf4ac7
+ return rc;
+ }
+
-+ rc = xgene_pcie_init_ecc(port);
-+ if (rc) {
-+ dev_err(port->dev, "memory init failed\n");
-+ return rc;
-+ }
-+
+ return 0;
+}
+
@@ -1614,7 +4215,7 @@ index 0000000..7bf4ac7
+ xgene_pcie_fixup_bridge);
+
+static int xgene_pcie_map_reg(struct xgene_pcie_port *port,
-+ struct platform_device *pdev, u64 *cfg_addr)
++ struct platform_device *pdev)
+{
+ struct resource *res;
+
@@ -1627,37 +4228,35 @@ index 0000000..7bf4ac7
+ port->cfg_base = devm_ioremap_resource(port->dev, res);
+ if (IS_ERR(port->cfg_base))
+ return PTR_ERR(port->cfg_base);
-+ *cfg_addr = res->start;
++ port->cfg_addr = res->start;
+
+ return 0;
+}
+
+static void xgene_pcie_setup_ob_reg(struct xgene_pcie_port *port,
-+ struct resource *res, u32 offset, u64 addr)
++ struct resource *res, u32 offset,
++ u64 cpu_addr, u64 pci_addr)
+{
+ void __iomem *base = port->csr_base + offset;
+ resource_size_t size = resource_size(res);
+ u64 restype = resource_type(res);
-+ u64 cpu_addr, pci_addr;
+ u64 mask = 0;
+ u32 min_size;
+ u32 flag = EN_REG;
+
+ if (restype == IORESOURCE_MEM) {
-+ cpu_addr = res->start;
-+ pci_addr = addr;
+ min_size = SZ_128M;
+ } else {
-+ cpu_addr = addr;
-+ pci_addr = res->start;
+ min_size = 128;
+ flag |= OB_LO_IO;
+ }
++
+ if (size >= min_size)
+ mask = ~(size - 1) | flag;
+ else
+ dev_warn(port->dev, "res size 0x%llx less than minimum 0x%x\n",
+ (u64)size, min_size);
++
+ writel(lower_32_bits(cpu_addr), base);
+ writel(upper_32_bits(cpu_addr), base + 0x04);
+ writel(lower_32_bits(mask), base + 0x08);
@@ -1674,29 +4273,30 @@ index 0000000..7bf4ac7
+}
+
+static int xgene_pcie_map_ranges(struct xgene_pcie_port *port,
-+ struct pci_host_bridge *bridge,
-+ u64 cfg_addr)
++ struct list_head *res,
++ resource_size_t io_base)
+{
-+ struct device *dev = port->dev;
+ struct pci_host_bridge_window *window;
++ struct device *dev = port->dev;
+ int ret;
+
-+ list_for_each_entry(window, &bridge->windows, list) {
++ list_for_each_entry(window, res, list) {
+ struct resource *res = window->res;
+ u64 restype = resource_type(res);
++
+ dev_dbg(port->dev, "0x%08lx 0x%016llx...0x%016llx\n",
+ res->flags, res->start, res->end);
+
+ switch (restype) {
+ case IORESOURCE_IO:
-+ xgene_pcie_setup_ob_reg(port, res, OMR2BARL,
-+ bridge->io_base);
-+ ret = pci_remap_iospace(res, bridge->io_base);
++ xgene_pcie_setup_ob_reg(port, res, OMR3BARL, io_base,
++ res->start - window->offset);
++ ret = pci_remap_iospace(res, io_base);
+ if (ret < 0)
+ return ret;
+ break;
+ case IORESOURCE_MEM:
-+ xgene_pcie_setup_ob_reg(port, res, OMR3BARL,
++ xgene_pcie_setup_ob_reg(port, res, OMR1BARL, res->start,
+ res->start - window->offset);
+ break;
+ case IORESOURCE_BUS:
@@ -1706,7 +4306,8 @@ index 0000000..7bf4ac7
+ return -EINVAL;
+ }
+ }
-+ xgene_pcie_setup_cfg_reg(port->csr_base, cfg_addr);
++ xgene_pcie_setup_cfg_reg(port->csr_base, port->cfg_addr);
++
+ return 0;
+}
+
@@ -1738,6 +4339,7 @@ index 0000000..7bf4ac7
+ *ib_reg_mask |= (1 << 2);
+ return 2;
+ }
++
+ return -EINVAL;
+}
+
@@ -1748,7 +4350,6 @@ index 0000000..7bf4ac7
+ void __iomem *cfg_base = port->cfg_base;
+ void *bar_addr;
+ void *pim_addr;
-+ u64 restype = range->flags & IORESOURCE_TYPE_BITS;
+ u64 cpu_addr = range->cpu_addr;
+ u64 pci_addr = range->pci_addr;
+ u64 size = range->size;
@@ -1763,7 +4364,7 @@ index 0000000..7bf4ac7
+ return;
+ }
+
-+ if (restype == PCI_BASE_ADDRESS_MEM_PREFETCH)
++ if (range->flags & IORESOURCE_PREFETCH)
+ flags |= PCI_BASE_ADDRESS_MEM_PREFETCH;
+
+ bar_low = pcie_bar_low_val((u32)cpu_addr, flags);
@@ -1791,7 +4392,7 @@ index 0000000..7bf4ac7
+ break;
+ }
+
-+ xgene_pcie_setup_pims(pim_addr, pci_addr, size);
++ xgene_pcie_setup_pims(pim_addr, pci_addr, ~(size - 1));
+}
+
+static int pci_dma_range_parser_init(struct of_pci_range_parser *parser,
@@ -1807,8 +4408,8 @@ index 0000000..7bf4ac7
+ parser->range = of_get_property(node, "dma-ranges", &rlen);
+ if (!parser->range)
+ return -ENOENT;
-+
+ parser->end = parser->range + rlen / sizeof(__be32);
++
+ return 0;
+}
+
@@ -1828,6 +4429,7 @@ index 0000000..7bf4ac7
+ /* Get the dma-ranges from DT */
+ for_each_of_pci_range(&parser, &range) {
+ u64 end = range.cpu_addr + range.size - 1;
++
+ dev_dbg(port->dev, "0x%08x 0x%016llx..0x%016llx -> 0x%016llx\n",
+ range.flags, range.cpu_addr, end, range.pci_addr);
+ xgene_pcie_setup_ib_reg(port, &range, &ib_reg_mask);
@@ -1835,53 +4437,77 @@ index 0000000..7bf4ac7
+ return 0;
+}
+
++/* clear bar configuration which was done by firmware */
++static void xgene_pcie_clear_config(struct xgene_pcie_port *port)
++{
++ int i;
++
++ for (i = PIM1_1L; i <= CFGCTL; i += 4)
++ writel(0x0, port->csr_base + i);
++}
++
++static int xgene_pcie_setup(struct xgene_pcie_port *port,
++ struct list_head *res,
++ resource_size_t io_base)
++{
++ u32 lanes = 0, speed = 0;
++ int ret;
++
++ xgene_pcie_clear_config(port);
++
++ ret = xgene_pcie_map_ranges(port, res, io_base);
++ if (ret)
++ return ret;
++
++ ret = xgene_pcie_parse_map_dma_ranges(port);
++ if (ret)
++ return ret;
++
++ xgene_pcie_linkup(port, &lanes, &speed);
++ if (!port->link_up)
++ dev_info(port->dev, "(rc) link down\n");
++ else
++ dev_info(port->dev, "(rc) x%d gen-%d link up\n",
++ lanes, speed + 1);
++ return 0;
++}
++
+static int xgene_pcie_probe_bridge(struct platform_device *pdev)
+{
-+ struct device_node *np = of_node_get(pdev->dev.of_node);
++ struct device_node *dn = pdev->dev.of_node;
+ struct xgene_pcie_port *port;
-+ struct pci_host_bridge *bridge;
-+ resource_size_t lastbus;
-+ u32 lanes = 0, speed = 0;
-+ u64 cfg_addr = 0;
++ resource_size_t iobase = 0;
++ struct pci_bus *bus;
+ int ret;
++ LIST_HEAD(res);
+
+ port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
+ if (!port)
+ return -ENOMEM;
-+ port->node = np;
++ port->node = of_node_get(pdev->dev.of_node);
+ port->dev = &pdev->dev;
+
-+ ret = xgene_pcie_map_reg(port, pdev, &cfg_addr);
++ ret = xgene_pcie_map_reg(port, pdev);
+ if (ret)
+ return ret;
+
+ ret = xgene_pcie_init_port(port);
+ if (ret)
+ return ret;
-+ xgene_pcie_program_core(port->csr_base);
-+ xgene_pcie_setup_root_complex(port);
+
-+ bridge = of_create_pci_host_bridge(&pdev->dev, &xgene_pcie_ops, port);
-+ if (IS_ERR_OR_NULL(bridge))
-+ return PTR_ERR(bridge);
-+
-+ ret = xgene_pcie_map_ranges(port, bridge, cfg_addr);
++ ret = of_pci_get_host_bridge_resources(dn, 0, 0xff, &res, &iobase);
+ if (ret)
+ return ret;
+
-+ ret = xgene_pcie_parse_map_dma_ranges(port);
++ ret = xgene_pcie_setup(port, &res, iobase);
+ if (ret)
+ return ret;
+
-+ xgene_pcie_poll_linkup(port, &lanes, &speed);
-+ if (!port->link_up)
-+ dev_info(port->dev, "(rc) link down\n");
-+ else
-+ dev_info(port->dev, "(rc) x%d gen-%d link up\n",
-+ lanes, speed + 1);
++ bus = pci_scan_root_bus(&pdev->dev, 0, &xgene_pcie_ops, port, &res);
++ if (!bus)
++ return -ENOMEM;
++
+ platform_set_drvdata(pdev, port);
-+ lastbus = pci_rescan_bus(bridge->bus);
-+ pci_bus_update_busn_res_end(bridge->bus, lastbus);
+ return 0;
+}
+
@@ -1903,73 +4529,143 @@ index 0000000..7bf4ac7
+MODULE_AUTHOR("Tanmay Inamdar <tinamdar@apm.com>");
+MODULE_DESCRIPTION("APM X-Gene PCIe driver");
+MODULE_LICENSE("GPL v2");
+diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
+index 4884ee5..61158e0 100644
+--- a/drivers/pci/host/pcie-rcar.c
++++ b/drivers/pci/host/pcie-rcar.c
+@@ -323,6 +323,7 @@ static void rcar_pcie_setup_window(int win, struct rcar_pcie *pcie)
+
+ /* Setup PCIe address space mappings for each resource */
+ resource_size_t size;
++ resource_size_t res_start;
+ u32 mask;
+
+ rcar_pci_write_reg(pcie, 0x00000000, PCIEPTCTLR(win));
+@@ -335,8 +336,13 @@ static void rcar_pcie_setup_window(int win, struct rcar_pcie *pcie)
+ mask = (roundup_pow_of_two(size) / SZ_128) - 1;
+ rcar_pci_write_reg(pcie, mask << 7, PCIEPAMR(win));
+
+- rcar_pci_write_reg(pcie, upper_32_bits(res->start), PCIEPARH(win));
+- rcar_pci_write_reg(pcie, lower_32_bits(res->start), PCIEPARL(win));
++ if (res->flags & IORESOURCE_IO)
++ res_start = pci_pio_to_address(res->start);
++ else
++ res_start = res->start;
++
++ rcar_pci_write_reg(pcie, upper_32_bits(res_start), PCIEPARH(win));
++ rcar_pci_write_reg(pcie, lower_32_bits(res_start), PCIEPARL(win));
+
+ /* First resource is for IO */
+ mask = PAR_ENABLE;
+@@ -363,9 +369,10 @@ static int rcar_pcie_setup(int nr, struct pci_sys_data *sys)
+
+ rcar_pcie_setup_window(i, pcie);
+
+- if (res->flags & IORESOURCE_IO)
+- pci_ioremap_io(nr * SZ_64K, res->start);
+- else
++ if (res->flags & IORESOURCE_IO) {
++ phys_addr_t io_start = pci_pio_to_address(res->start);
++ pci_ioremap_io(nr * SZ_64K, io_start);
++ } else
+ pci_add_resource(&sys->resources, res);
+ }
+ pci_add_resource(&sys->resources, &pcie->busn);
+@@ -935,8 +942,10 @@ static int rcar_pcie_probe(struct platform_device *pdev)
+ }
+
+ for_each_of_pci_range(&parser, &range) {
+- of_pci_range_to_resource(&range, pdev->dev.of_node,
++ err = of_pci_range_to_resource(&range, pdev->dev.of_node,
+ &pcie->res[win++]);
++ if (err < 0)
++ return err;
+
+ if (win > RCAR_PCI_MAX_RESOURCES)
+ break;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
-index 2c9ac70..7bae0f9 100644
+index 2c9ac70..6e994fc 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
-@@ -17,6 +17,7 @@
- #include <linux/spinlock.h>
- #include <linux/string.h>
- #include <linux/log2.h>
-+#include <linux/of_pci.h>
- #include <linux/pci-aspm.h>
- #include <linux/pm_wakeup.h>
- #include <linux/interrupt.h>
-@@ -1453,6 +1454,9 @@ EXPORT_SYMBOL(pcim_pin_device);
- */
- int __weak pcibios_add_device(struct pci_dev *dev)
- {
-+#ifdef CONFIG_OF
-+ dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
-+#endif
- return 0;
- }
-
-@@ -2704,6 +2708,39 @@ int pci_request_regions_exclusive(struct pci_dev *pdev, const char *res_name)
+@@ -2704,6 +2704,37 @@ int pci_request_regions_exclusive(struct pci_dev *pdev, const char *res_name)
}
EXPORT_SYMBOL(pci_request_regions_exclusive);
+/**
+ * pci_remap_iospace - Remap the memory mapped I/O space
+ * @res: Resource describing the I/O space
-+ * @phys_addr: physical address where the range will be mapped.
++ * @phys_addr: physical address of range to be mapped
+ *
+ * Remap the memory mapped I/O space described by the @res
-+ * into the CPU physical address space. Only architectures
-+ * that have memory mapped IO defined (and hence PCI_IOBASE)
-+ * should call this function.
++ * and the CPU physical address @phys_addr into virtual address space.
++ * Only architectures that have memory mapped IO functions defined
++ * (and the PCI_IOBASE value defined) should call this function.
+ */
+int __weak pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
+{
-+ int err = -ENODEV;
++#if defined(PCI_IOBASE) && defined(CONFIG_MMU)
++ unsigned long vaddr = (unsigned long)PCI_IOBASE + res->start;
+
-+#ifdef PCI_IOBASE
+ if (!(res->flags & IORESOURCE_IO))
+ return -EINVAL;
+
+ if (res->end > IO_SPACE_LIMIT)
+ return -EINVAL;
+
-+ err = ioremap_page_range(res->start + (unsigned long)PCI_IOBASE,
-+ res->end + 1 + (unsigned long)PCI_IOBASE,
-+ phys_addr, __pgprot(PROT_DEVICE_nGnRE));
++ return ioremap_page_range(vaddr, vaddr + resource_size(res), phys_addr,
++ pgprot_device(PAGE_KERNEL));
+#else
+ /* this architecture does not have memory mapped I/O space,
+ so this function should never be called */
-+ WARN_ON(1);
++ WARN_ONCE(1, "This architecture does not support memory mapped I/O\n");
++ return -ENODEV;
+#endif
-+
-+ return err;
+}
+
static void __pci_set_master(struct pci_dev *dev, bool enable)
{
u16 old_cmd, cmd;
+@@ -4406,6 +4437,15 @@ static void pci_no_domains(void)
+ #endif
+ }
+
++#ifdef CONFIG_PCI_DOMAINS
++static atomic_t __domain_nr = ATOMIC_INIT(-1);
++
++int pci_get_new_domain_nr(void)
++{
++ return atomic_inc_return(&__domain_nr);
++}
++#endif
++
+ /**
+ * pci_ext_cfg_avail - can we access extended PCI config space?
+ *
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
-index e3cf8a2..abf5e82 100644
+index 4170113..c3cec34 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
-@@ -515,7 +515,7 @@ static void pci_release_host_bridge_dev(struct device *dev)
+@@ -485,7 +485,7 @@ void pci_read_bridge_bases(struct pci_bus *child)
+ }
+ }
+
+-static struct pci_bus *pci_alloc_bus(void)
++static struct pci_bus *pci_alloc_bus(struct pci_bus *parent)
+ {
+ struct pci_bus *b;
+
+@@ -500,6 +500,10 @@ static struct pci_bus *pci_alloc_bus(void)
+ INIT_LIST_HEAD(&b->resources);
+ b->max_bus_speed = PCI_SPEED_UNKNOWN;
+ b->cur_bus_speed = PCI_SPEED_UNKNOWN;
++#ifdef CONFIG_PCI_DOMAINS_GENERIC
++ if (parent)
++ b->domain_nr = parent->domain_nr;
++#endif
+ return b;
+ }
+
+@@ -515,7 +519,7 @@ static void pci_release_host_bridge_dev(struct device *dev)
kfree(bridge);
}
@@ -1978,56 +4674,50 @@ index e3cf8a2..abf5e82 100644
{
struct pci_host_bridge *bridge;
-@@ -524,7 +524,6 @@ static struct pci_host_bridge *pci_alloc_host_bridge(struct pci_bus *b)
+@@ -524,7 +528,8 @@ static struct pci_host_bridge *pci_alloc_host_bridge(struct pci_bus *b)
return NULL;
INIT_LIST_HEAD(&bridge->windows);
- bridge->bus = b;
++ bridge->dev.release = pci_release_host_bridge_dev;
++
return bridge;
}
-@@ -1749,8 +1748,9 @@ void __weak pcibios_remove_bus(struct pci_bus *bus)
- {
- }
+@@ -671,7 +676,7 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
+ /*
+ * Allocate a new bus, and inherit stuff from the parent..
+ */
+- child = pci_alloc_bus();
++ child = pci_alloc_bus(parent);
+ if (!child)
+ return NULL;
--struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
-- struct pci_ops *ops, void *sysdata, struct list_head *resources)
-+struct pci_bus *pci_create_root_bus_in_domain(struct device *parent,
-+ int domain, int bus, struct pci_ops *ops, void *sysdata,
-+ struct list_head *resources)
- {
- int error;
- struct pci_host_bridge *bridge;
-@@ -1761,37 +1761,41 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
+@@ -1751,37 +1756,37 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
char bus_addr[64];
char *fmt;
+- b = pci_alloc_bus();
+- if (!b)
+ bridge = pci_alloc_host_bridge();
+ if (!bridge)
-+ return ERR_PTR(-ENOMEM);
-+
+ return NULL;
+
+ bridge->dev.parent = parent;
-+ bridge->dev.release = pci_release_host_bridge_dev;
-+ bridge->domain_nr = domain;
+
- b = pci_alloc_bus();
-- if (!b)
-- return NULL;
-+ if (!b) {
-+ error = -ENOMEM;
++ b = pci_alloc_bus(NULL);
++ if (!b)
+ goto err_out;
-+ }
-
++
b->sysdata = sysdata;
b->ops = ops;
b->number = b->busn_res.start = bus;
-- b2 = pci_find_bus(pci_domain_nr(b), bus);
-+ b2 = pci_find_bus(bridge->domain_nr, bus);
++ pci_bus_assign_domain_nr(b, parent);
+ b2 = pci_find_bus(pci_domain_nr(b), bus);
if (b2) {
/* If we already got to this bus through a different bridge, ignore it */
dev_dbg(&b2->dev, "bus already known\n");
- goto err_out;
-+ error = -EEXIST;
+ goto err_bus_out;
}
@@ -2037,9 +4727,8 @@ index e3cf8a2..abf5e82 100644
-
- bridge->dev.parent = parent;
- bridge->dev.release = pci_release_host_bridge_dev;
-- dev_set_name(&bridge->dev, "pci%04x:%02x", pci_domain_nr(b), bus);
+ bridge->bus = b;
-+ dev_set_name(&bridge->dev, "pci%04x:%02x", bridge->domain_nr, bus);
+ dev_set_name(&bridge->dev, "pci%04x:%02x", pci_domain_nr(b), bus);
error = pcibios_root_bridge_prepare(bridge);
- if (error) {
- kfree(bridge);
@@ -2055,48 +4744,595 @@ index e3cf8a2..abf5e82 100644
}
b->bridge = get_device(&bridge->dev);
device_enable_async_suspend(b->bridge);
-@@ -1802,7 +1806,7 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
-
- b->dev.class = &pcibus_class;
- b->dev.parent = b->bridge;
-- dev_set_name(&b->dev, "%04x:%02x", pci_domain_nr(b), bus);
-+ dev_set_name(&b->dev, "%04x:%02x", bridge->domain_nr, bus);
- error = device_register(&b->dev);
- if (error)
- goto class_dev_reg_err;
-@@ -1848,9 +1852,31 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
+@@ -1838,8 +1843,10 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
class_dev_reg_err:
put_device(&bridge->dev);
device_unregister(&bridge->dev);
+-err_out:
+err_bus_out:
-+ kfree(b);
- err_out:
+ kfree(b);
++err_out:
+ kfree(bridge);
-+ return ERR_PTR(error);
+ return NULL;
+ }
+
+@@ -1936,6 +1943,9 @@ struct pci_bus *pci_scan_root_bus(struct device *parent, int bus,
+ if (!found)
+ pci_bus_update_busn_res_end(b, max);
+
++ if (!pci_has_flag(PCI_PROBE_ONLY))
++ pci_assign_unassigned_bus_resources(b);
++
+ pci_bus_add_devices(b);
+ return b;
+ }
+diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c
+index 782e822..d952462 100644
+--- a/drivers/pnp/resource.c
++++ b/drivers/pnp/resource.c
+@@ -313,6 +313,7 @@ static int pci_dev_uses_irq(struct pnp_dev *pnp, struct pci_dev *pci,
+ progif = class & 0xff;
+ class >>= 8;
+
++#ifdef HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ
+ if (class == PCI_CLASS_STORAGE_IDE) {
+ /*
+ * Unless both channels are native-PCI mode only,
+@@ -326,6 +327,7 @@ static int pci_dev_uses_irq(struct pnp_dev *pnp, struct pci_dev *pci,
+ return 1;
+ }
+ }
++#endif /* HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ */
+
+ return 0;
+ }
+diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
+index b24aa01..50fe279 100644
+--- a/drivers/tty/Kconfig
++++ b/drivers/tty/Kconfig
+@@ -419,4 +419,10 @@ config DA_CONSOLE
+ help
+ This enables a console on a Dash channel.
+
++config SBSAUART_TTY
++ tristate "SBSA UART TTY Driver"
++ help
++ Console and system TTY driver for the SBSA UART which is defined
++ in the Server Base System Architecure document for ARM64 servers.
++
+ endif # TTY
+diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
+index 58ad1c0..c3211c0 100644
+--- a/drivers/tty/Makefile
++++ b/drivers/tty/Makefile
+@@ -29,5 +29,6 @@ obj-$(CONFIG_SYNCLINK) += synclink.o
+ obj-$(CONFIG_PPC_EPAPR_HV_BYTECHAN) += ehv_bytechan.o
+ obj-$(CONFIG_GOLDFISH_TTY) += goldfish.o
+ obj-$(CONFIG_DA_TTY) += metag_da.o
++obj-$(CONFIG_SBSAUART_TTY) += sbsauart.o
+
+ obj-y += ipwireless/
+diff --git a/drivers/tty/sbsauart.c b/drivers/tty/sbsauart.c
+new file mode 100644
+index 0000000..402f168
+--- /dev/null
++++ b/drivers/tty/sbsauart.c
+@@ -0,0 +1,355 @@
++/*
++ * SBSA (Server Base System Architecture) Compatible UART driver
++ *
++ * Copyright (C) 2014 Linaro Ltd
++ *
++ * Author: Graeme Gregory <graeme.gregory@linaro.org>
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/acpi.h>
++#include <linux/amba/serial.h>
++#include <linux/console.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/serial_core.h>
++#include <linux/tty.h>
++#include <linux/tty_flip.h>
++
++struct sbsa_tty {
++ struct tty_port port;
++ spinlock_t lock;
++ void __iomem *base;
++ u32 irq;
++ int opencount;
++ struct console console;
++};
++
++static struct tty_driver *sbsa_tty_driver;
++static struct sbsa_tty *sbsa_tty;
++
++#define SBSAUART_CHAR_MASK 0xFF
++
++static void sbsa_raw_putc(struct uart_port *port, int c)
++{
++ while (readw(port->membase + UART01x_FR) & UART01x_FR_TXFF)
++ ;
++ writew(c & 0xFF, port->membase + UART01x_DR);
+}
+
-+struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
-+ struct pci_ops *ops, void *sysdata, struct list_head *resources)
++static void sbsa_uart_early_write(struct console *con, const char *buf,
++ unsigned count)
+{
-+ int domain_nr;
-+ struct pci_bus *b = pci_alloc_bus();
-+ if (!b)
-+ return NULL;
++ struct earlycon_device *dev = con->data;
+
-+ b->sysdata = sysdata;
-+ domain_nr = pci_domain_nr(b);
- kfree(b);
-- return NULL;
++ uart_console_write(&dev->port, buf, count, sbsa_raw_putc);
++}
+
-+ b = pci_create_root_bus_in_domain(parent, domain_nr, bus,
-+ ops, sysdata, resources);
-+ if (IS_ERR(b))
-+ return NULL;
++static int __init sbsa_uart_early_console_setup(struct earlycon_device *device,
++ const char *opt)
++{
++ if (!device->port.membase)
++ return -ENODEV;
++
++ device->con->write = sbsa_uart_early_write;
++ return 0;
++}
++EARLYCON_DECLARE(sbsauart, sbsa_uart_early_console_setup);
++
++static void sbsa_tty_do_write(const char *buf, unsigned count)
++{
++ unsigned long irq_flags;
++ struct sbsa_tty *qtty = sbsa_tty;
++ void __iomem *base = qtty->base;
++ unsigned n;
++
++ spin_lock_irqsave(&qtty->lock, irq_flags);
++ for (n = 0; n < count; n++) {
++ while (readw(base + UART01x_FR) & UART01x_FR_TXFF)
++ ;
++ writew(buf[n], base + UART01x_DR);
++ }
++ spin_unlock_irqrestore(&qtty->lock, irq_flags);
++}
++
++static void sbsauart_fifo_to_tty(struct sbsa_tty *qtty)
++{
++ void __iomem *base = qtty->base;
++ unsigned int flag, max_count = 32;
++ u16 status, ch;
++
++ while (max_count--) {
++ status = readw(base + UART01x_FR);
++ if (status & UART01x_FR_RXFE)
++ break;
++
++ /* Take chars from the FIFO and update status */
++ ch = readw(base + UART01x_DR);
++ flag = TTY_NORMAL;
++
++ if (ch & UART011_DR_BE)
++ flag = TTY_BREAK;
++ else if (ch & UART011_DR_PE)
++ flag = TTY_PARITY;
++ else if (ch & UART011_DR_FE)
++ flag = TTY_FRAME;
++ else if (ch & UART011_DR_OE)
++ flag = TTY_OVERRUN;
++
++ ch &= SBSAUART_CHAR_MASK;
++
++ tty_insert_flip_char(&qtty->port, ch, flag);
++ }
++
++ tty_schedule_flip(&qtty->port);
++
++ /* Clear the RX IRQ */
++ writew(UART011_RXIC | UART011_RXIC, base + UART011_ICR);
++}
++
++static irqreturn_t sbsa_tty_interrupt(int irq, void *dev_id)
++{
++ struct sbsa_tty *qtty = sbsa_tty;
++ unsigned long irq_flags;
++
++ spin_lock_irqsave(&qtty->lock, irq_flags);
++ sbsauart_fifo_to_tty(qtty);
++ spin_unlock_irqrestore(&qtty->lock, irq_flags);
++
++ return IRQ_HANDLED;
++}
++
++static int sbsa_tty_open(struct tty_struct *tty, struct file *filp)
++{
++ struct sbsa_tty *qtty = sbsa_tty;
++
++ return tty_port_open(&qtty->port, tty, filp);
++}
++
++static void sbsa_tty_close(struct tty_struct *tty, struct file *filp)
++{
++ tty_port_close(tty->port, tty, filp);
++}
++
++static void sbsa_tty_hangup(struct tty_struct *tty)
++{
++ tty_port_hangup(tty->port);
++}
++
++static int sbsa_tty_write(struct tty_struct *tty, const unsigned char *buf,
++ int count)
++{
++ sbsa_tty_do_write(buf, count);
++ return count;
++}
++
++static int sbsa_tty_write_room(struct tty_struct *tty)
++{
++ return 32;
++}
++
++static void sbsa_tty_console_write(struct console *co, const char *b,
++ unsigned count)
++{
++ sbsa_tty_do_write(b, count);
++
++ if (b[count - 1] == '\n')
++ sbsa_tty_do_write("\r", 1);
++}
++
++static struct tty_driver *sbsa_tty_console_device(struct console *c,
++ int *index)
++{
++ *index = c->index;
++ return sbsa_tty_driver;
++}
++
++static int sbsa_tty_console_setup(struct console *co, char *options)
++{
++ if ((unsigned)co->index > 0)
++ return -ENODEV;
++ if (sbsa_tty->base == NULL)
++ return -ENODEV;
++ return 0;
++}
++
++static struct tty_port_operations sbsa_port_ops = {
++};
++
++static const struct tty_operations sbsa_tty_ops = {
++ .open = sbsa_tty_open,
++ .close = sbsa_tty_close,
++ .hangup = sbsa_tty_hangup,
++ .write = sbsa_tty_write,
++ .write_room = sbsa_tty_write_room,
++};
++
++static int sbsa_tty_create_driver(void)
++{
++ int ret;
++ struct tty_driver *tty;
++
++ sbsa_tty = kzalloc(sizeof(*sbsa_tty), GFP_KERNEL);
++ if (sbsa_tty == NULL) {
++ ret = -ENOMEM;
++ goto err_alloc_sbsa_tty_failed;
++ }
++ tty = alloc_tty_driver(1);
++ if (tty == NULL) {
++ ret = -ENOMEM;
++ goto err_alloc_tty_driver_failed;
++ }
++ tty->driver_name = "sbsauart";
++ tty->name = "ttySBSA";
++ tty->type = TTY_DRIVER_TYPE_SERIAL;
++ tty->subtype = SERIAL_TYPE_NORMAL;
++ tty->init_termios = tty_std_termios;
++ tty->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW |
++ TTY_DRIVER_DYNAMIC_DEV;
++ tty_set_operations(tty, &sbsa_tty_ops);
++ ret = tty_register_driver(tty);
++ if (ret)
++ goto err_tty_register_driver_failed;
++
++ sbsa_tty_driver = tty;
++ return 0;
++
++err_tty_register_driver_failed:
++ put_tty_driver(tty);
++err_alloc_tty_driver_failed:
++ kfree(sbsa_tty);
++ sbsa_tty = NULL;
++err_alloc_sbsa_tty_failed:
++ return ret;
++}
++
++static void sbsa_tty_delete_driver(void)
++{
++ tty_unregister_driver(sbsa_tty_driver);
++ put_tty_driver(sbsa_tty_driver);
++ sbsa_tty_driver = NULL;
++ kfree(sbsa_tty);
++ sbsa_tty = NULL;
++}
++
++static int sbsa_tty_probe(struct platform_device *pdev)
++{
++ struct sbsa_tty *qtty;
++ int ret = -EINVAL;
++ int i;
++ struct resource *r;
++ struct device *ttydev;
++ void __iomem *base;
++ u32 irq;
++
++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (r == NULL)
++ return -EINVAL;
++
++ base = ioremap(r->start, r->end - r->start);
++ if (base == NULL)
++ pr_err("sbsa_tty: unable to remap base\n");
++
++ r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++ if (r == NULL)
++ goto err_unmap;
++
++ irq = r->start;
++
++ if (pdev->id > 0)
++ goto err_unmap;
++
++ ret = sbsa_tty_create_driver();
++ if (ret)
++ goto err_unmap;
++
++ qtty = sbsa_tty;
++ spin_lock_init(&qtty->lock);
++ tty_port_init(&qtty->port);
++ qtty->port.ops = &sbsa_port_ops;
++ qtty->base = base;
++ qtty->irq = irq;
++
++ /* Clear and Mask all IRQs */
++ writew(0, base + UART011_IMSC);
++ writew(0xFFFF, base + UART011_ICR);
++
++ ret = request_irq(irq, sbsa_tty_interrupt, IRQF_SHARED,
++ "sbsa_tty", pdev);
++ if (ret)
++ goto err_request_irq_failed;
++
++ /* Unmask the RX IRQ */
++ writew(UART011_RXIM | UART011_RTIM, base + UART011_IMSC);
++
++ ttydev = tty_port_register_device(&qtty->port, sbsa_tty_driver,
++ 0, &pdev->dev);
++ if (IS_ERR(ttydev)) {
++ ret = PTR_ERR(ttydev);
++ goto err_tty_register_device_failed;
++ }
++
++ strcpy(qtty->console.name, "ttySBSA");
++ qtty->console.write = sbsa_tty_console_write;
++ qtty->console.device = sbsa_tty_console_device;
++ qtty->console.setup = sbsa_tty_console_setup;
++ qtty->console.flags = CON_PRINTBUFFER;
++ qtty->console.index = pdev->id;
++ register_console(&qtty->console);
++
++ return 0;
++
++ tty_unregister_device(sbsa_tty_driver, i);
++err_tty_register_device_failed:
++ free_irq(irq, pdev);
++err_request_irq_failed:
++ sbsa_tty_delete_driver();
++err_unmap:
++ iounmap(base);
++ return ret;
++}
+
-+ return b;
++static int sbsa_tty_remove(struct platform_device *pdev)
++{
++ struct sbsa_tty *qtty;
++
++ qtty = sbsa_tty;
++ unregister_console(&qtty->console);
++ tty_unregister_device(sbsa_tty_driver, pdev->id);
++ iounmap(qtty->base);
++ qtty->base = 0;
++ free_irq(qtty->irq, pdev);
++ sbsa_tty_delete_driver();
++ return 0;
++}
++
++static const struct acpi_device_id sbsa_acpi_match[] = {
++ { "ARMH0011", 0 },
++ { }
++};
++
++static struct platform_driver sbsa_tty_platform_driver = {
++ .probe = sbsa_tty_probe,
++ .remove = sbsa_tty_remove,
++ .driver = {
++ .name = "sbsa_tty",
++ .acpi_match_table = ACPI_PTR(sbsa_acpi_match),
++ }
++};
++
++module_platform_driver(sbsa_tty_platform_driver);
++
++MODULE_LICENSE("GPL v2");
+diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
+index 57d9df8..e075437 100644
+--- a/drivers/tty/serial/8250/8250_dw.c
++++ b/drivers/tty/serial/8250/8250_dw.c
+@@ -313,10 +313,18 @@ static int dw8250_probe_of(struct uart_port *p,
+ static int dw8250_probe_acpi(struct uart_8250_port *up,
+ struct dw8250_data *data)
+ {
++ const struct acpi_device_id *id;
+ struct uart_port *p = &up->port;
+
+ dw8250_setup_port(up);
+
++ id = acpi_match_device(p->dev->driver->acpi_match_table, p->dev);
++ if (!id)
++ return -ENODEV;
++
++ if (!p->uartclk)
++ p->uartclk = (unsigned int)id->driver_data;
++
+ p->iotype = UPIO_MEM32;
+ p->serial_in = dw8250_serial_in32;
+ p->serial_out = dw8250_serial_out32;
+@@ -541,6 +549,7 @@ static const struct acpi_device_id dw8250_acpi_match[] = {
+ { "INT3435", 0 },
+ { "80860F0A", 0 },
+ { "8086228A", 0 },
++ { "APMC0D08", 50000000},
+ { },
+ };
+ MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
+diff --git a/include/acpi/acnames.h b/include/acpi/acnames.h
+index c728113..f97804b 100644
+--- a/include/acpi/acnames.h
++++ b/include/acpi/acnames.h
+@@ -59,6 +59,10 @@
+ #define METHOD_NAME__PRS "_PRS"
+ #define METHOD_NAME__PRT "_PRT"
+ #define METHOD_NAME__PRW "_PRW"
++#define METHOD_NAME__PS0 "_PS0"
++#define METHOD_NAME__PS1 "_PS1"
++#define METHOD_NAME__PS2 "_PS2"
++#define METHOD_NAME__PS3 "_PS3"
+ #define METHOD_NAME__REG "_REG"
+ #define METHOD_NAME__SB_ "_SB_"
+ #define METHOD_NAME__SEG "_SEG"
+diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
+index d91e59b..68d5ade 100644
+--- a/include/acpi/acpi_bus.h
++++ b/include/acpi/acpi_bus.h
+@@ -68,6 +68,8 @@ bool acpi_check_dsm(acpi_handle handle, const u8 *uuid, int rev, u64 funcs);
+ union acpi_object *acpi_evaluate_dsm(acpi_handle handle, const u8 *uuid,
+ int rev, int func, union acpi_object *argv4);
+
++acpi_status acpi_check_coherency(acpi_handle handle, int *val);
++
+ static inline union acpi_object *
+ acpi_evaluate_dsm_typed(acpi_handle handle, const u8 *uuid, int rev, int func,
+ union acpi_object *argv4, acpi_object_type type)
+diff --git a/include/acpi/acpi_io.h b/include/acpi/acpi_io.h
+index 444671e..9d573db 100644
+--- a/include/acpi/acpi_io.h
++++ b/include/acpi/acpi_io.h
+@@ -1,11 +1,17 @@
+ #ifndef _ACPI_IO_H_
+ #define _ACPI_IO_H_
+
++#include <linux/mm.h>
+ #include <linux/io.h>
+
+ static inline void __iomem *acpi_os_ioremap(acpi_physical_address phys,
+ acpi_size size)
+ {
++#ifdef CONFIG_ARM64
++ if (!page_is_ram(phys >> PAGE_SHIFT))
++ return ioremap(phys, size);
++#endif
++
+ return ioremap_cache(phys, size);
}
- int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int bus_max)
+diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
+index b7c89d4..dc9d037 100644
+--- a/include/acpi/acpixf.h
++++ b/include/acpi/acpixf.h
+@@ -46,7 +46,7 @@
+
+ /* Current ACPICA subsystem version in YYYYMMDD format */
+
+-#define ACPI_CA_VERSION 0x20140724
++#define ACPI_CA_VERSION 0x20140828
+
+ #include <acpi/acconfig.h>
+ #include <acpi/actypes.h>
+diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h
+index 7626bfe..29e7937 100644
+--- a/include/acpi/actbl1.h
++++ b/include/acpi/actbl1.h
+@@ -952,7 +952,8 @@ enum acpi_srat_type {
+ ACPI_SRAT_TYPE_CPU_AFFINITY = 0,
+ ACPI_SRAT_TYPE_MEMORY_AFFINITY = 1,
+ ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY = 2,
+- ACPI_SRAT_TYPE_RESERVED = 3 /* 3 and greater are reserved */
++ ACPI_SRAT_TYPE_GICC_AFFINITY = 3,
++ ACPI_SRAT_TYPE_RESERVED = 4 /* 4 and greater are reserved */
+ };
+
+ /*
+@@ -968,7 +969,7 @@ struct acpi_srat_cpu_affinity {
+ u32 flags;
+ u8 local_sapic_eid;
+ u8 proximity_domain_hi[3];
+- u32 reserved; /* Reserved, must be zero */
++ u32 clock_domain;
+ };
+
+ /* Flags */
+@@ -1010,6 +1011,20 @@ struct acpi_srat_x2apic_cpu_affinity {
+
+ #define ACPI_SRAT_CPU_ENABLED (1) /* 00: Use affinity structure */
+
++/* 3: GICC Affinity (ACPI 5.1) */
++
++struct acpi_srat_gicc_affinity {
++ struct acpi_subtable_header header;
++ u32 proximity_domain;
++ u32 acpi_processor_uid;
++ u32 flags;
++ u32 clock_domain;
++};
++
++/* Flags for struct acpi_srat_gicc_affinity */
++
++#define ACPI_SRAT_GICC_ENABLED (1) /* 00: Use affinity structure */
++
+ /* Reset to default packing */
+
+ #pragma pack()
+diff --git a/include/acpi/actbl3.h b/include/acpi/actbl3.h
+index 787bcc8..5480cb2 100644
+--- a/include/acpi/actbl3.h
++++ b/include/acpi/actbl3.h
+@@ -310,10 +310,15 @@ struct acpi_gtdt_timer_entry {
+ u32 common_flags;
+ };
+
++/* Flag Definitions: timer_flags and virtual_timer_flags above */
++
++#define ACPI_GTDT_GT_IRQ_MODE (1)
++#define ACPI_GTDT_GT_IRQ_POLARITY (1<<1)
++
+ /* Flag Definitions: common_flags above */
+
+-#define ACPI_GTDT_GT_IS_SECURE_TIMER (1)
+-#define ACPI_GTDT_GT_ALWAYS_ON (1<<1)
++#define ACPI_GTDT_GT_IS_SECURE_TIMER (1)
++#define ACPI_GTDT_GT_ALWAYS_ON (1<<1)
+
+ /* 1: SBSA Generic Watchdog Structure */
+
diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h
index 975e1cc..2e2161b 100644
--- a/include/asm-generic/io.h
@@ -2110,11 +5346,147 @@ index 975e1cc..2e2161b 100644
}
static inline void ioport_unmap(void __iomem *p)
+diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
+index 53b2acc..977e545 100644
+--- a/include/asm-generic/pgtable.h
++++ b/include/asm-generic/pgtable.h
+@@ -249,6 +249,10 @@ static inline int pmd_same(pmd_t pmd_a, pmd_t pmd_b)
+ #define pgprot_writecombine pgprot_noncached
+ #endif
+
++#ifndef pgprot_device
++#define pgprot_device pgprot_noncached
++#endif
++
+ /*
+ * When walking page tables, get the address of the next boundary,
+ * or the end address of the range if that comes earlier. Although no
+diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
+index 35b0c12..d98e96b 100644
+--- a/include/kvm/arm_vgic.h
++++ b/include/kvm/arm_vgic.h
+@@ -237,17 +237,19 @@ bool vgic_handle_mmio(struct kvm_vcpu *vcpu, struct kvm_run *run,
+ #define irqchip_in_kernel(k) (!!((k)->arch.vgic.in_kernel))
+ #define vgic_initialized(k) ((k)->arch.vgic.ready)
+
+-int vgic_v2_probe(struct device_node *vgic_node,
+- const struct vgic_ops **ops,
+- const struct vgic_params **params);
++int vgic_v2_dt_probe(struct device_node *vgic_node,
++ const struct vgic_ops **ops,
++ const struct vgic_params **params);
++int vgic_v2_acpi_probe(const struct vgic_ops **ops,
++ const struct vgic_params **params);
+ #ifdef CONFIG_ARM_GIC_V3
+-int vgic_v3_probe(struct device_node *vgic_node,
+- const struct vgic_ops **ops,
+- const struct vgic_params **params);
++int vgic_v3_dt_probe(struct device_node *vgic_node,
++ const struct vgic_ops **ops,
++ const struct vgic_params **params);
+ #else
+-static inline int vgic_v3_probe(struct device_node *vgic_node,
+- const struct vgic_ops **ops,
+- const struct vgic_params **params)
++static inline int vgic_v3_dt_probe(struct device_node *vgic_node,
++ const struct vgic_ops **ops,
++ const struct vgic_params **params)
+ {
+ return -ENODEV;
+ }
+diff --git a/include/linux/acpi.h b/include/linux/acpi.h
+index 807cbc4..4615eb1 100644
+--- a/include/linux/acpi.h
++++ b/include/linux/acpi.h
+@@ -71,6 +71,7 @@ enum acpi_irq_model_id {
+ ACPI_IRQ_MODEL_IOAPIC,
+ ACPI_IRQ_MODEL_IOSAPIC,
+ ACPI_IRQ_MODEL_PLATFORM,
++ ACPI_IRQ_MODEL_GIC,
+ ACPI_IRQ_MODEL_COUNT
+ };
+
+@@ -123,6 +124,10 @@ int acpi_numa_init (void);
+
+ int acpi_table_init (void);
+ int acpi_table_parse(char *id, acpi_tbl_table_handler handler);
++int __init acpi_parse_entries(unsigned long table_size,
++ acpi_tbl_entry_handler handler,
++ struct acpi_table_header *table_header,
++ int entry_id, unsigned int max_entries);
+ int __init acpi_table_parse_entries(char *id, unsigned long table_size,
+ int entry_id,
+ acpi_tbl_entry_handler handler,
+diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
+index 653f0e2..5839f98 100644
+--- a/include/linux/clocksource.h
++++ b/include/linux/clocksource.h
+@@ -346,4 +346,10 @@ extern void clocksource_of_init(void);
+ static inline void clocksource_of_init(void) {}
+ #endif
+
++#ifdef CONFIG_ACPI
++void acpi_generic_timer_init(void);
++#else
++static inline void acpi_generic_timer_init(void) {}
++#endif
++
+ #endif /* _LINUX_CLOCKSOURCE_H */
+diff --git a/include/linux/irqchip/arm-gic-acpi.h b/include/linux/irqchip/arm-gic-acpi.h
+new file mode 100644
+index 0000000..ad5b577
+--- /dev/null
++++ b/include/linux/irqchip/arm-gic-acpi.h
+@@ -0,0 +1,31 @@
++/*
++ * Copyright (C) 2014, Linaro Ltd.
++ * Author: Tomasz Nowicki <tomasz.nowicki@linaro.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef ARM_GIC_ACPI_H_
++#define ARM_GIC_ACPI_H_
++
++#ifdef CONFIG_ACPI
++
++/*
++ * Hard code here, we can not get memory size from MADT (but FDT does),
++ * Actually no need to do that, because this size can be inferred
++ * from GIC spec.
++ */
++#define ACPI_GICV2_DIST_MEM_SIZE (SZ_4K)
++#define ACPI_GIC_CPU_IF_MEM_SIZE (SZ_8K)
++
++struct acpi_table_header;
++
++void acpi_gic_init(void);
++int gic_v2_acpi_init(struct acpi_table_header *table);
++#else
++static inline void acpi_gic_init(void) { }
++#endif
++
++#endif /* ARM_GIC_ACPI_H_ */
+diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h
+index 45e2d8c..2b0f246 100644
+--- a/include/linux/irqchip/arm-gic.h
++++ b/include/linux/irqchip/arm-gic.h
+@@ -39,6 +39,8 @@
+ #define GIC_DIST_SGI_PENDING_CLEAR 0xf10
+ #define GIC_DIST_SGI_PENDING_SET 0xf20
+
++#define GIC_DIST_SOFTINT_NSATT 0x8000
++
+ #define GICH_HCR 0x0
+ #define GICH_VTR 0x4
+ #define GICH_VMCR 0x8
diff --git a/include/linux/of_address.h b/include/linux/of_address.h
-index fb7b722..cb9479e4 100644
+index fb7b722..7ebb877 100644
--- a/include/linux/of_address.h
+++ b/include/linux/of_address.h
-@@ -23,17 +23,8 @@ struct of_pci_range {
+@@ -23,17 +23,6 @@ struct of_pci_range {
#define for_each_of_pci_range(parser, range) \
for (; of_pci_range_parser_one(parser, range);)
@@ -2129,71 +5501,96 @@ index fb7b722..cb9479e4 100644
- res->name = np->full_name;
-}
-
-+extern int of_pci_range_to_resource(struct of_pci_range *range,
-+ struct device_node *np, struct resource *res);
/* Translate a DMA address from device space to CPU space */
extern u64 of_translate_dma_address(struct device_node *dev,
const __be32 *in_addr);
-@@ -55,6 +46,7 @@ extern void __iomem *of_iomap(struct device_node *device, int index);
+@@ -55,7 +44,9 @@ extern void __iomem *of_iomap(struct device_node *device, int index);
extern const __be32 *of_get_address(struct device_node *dev, int index,
u64 *size, unsigned int *flags);
+extern int pci_register_io_range(phys_addr_t addr, resource_size_t size);
extern unsigned long pci_address_to_pio(phys_addr_t addr);
++extern phys_addr_t pci_pio_to_address(unsigned long pio);
extern int of_pci_range_parser_init(struct of_pci_range_parser *parser,
+ struct device_node *node);
+@@ -138,6 +129,9 @@ extern const __be32 *of_get_pci_address(struct device_node *dev, int bar_no,
+ u64 *size, unsigned int *flags);
+ extern int of_pci_address_to_resource(struct device_node *dev, int bar,
+ struct resource *r);
++extern int of_pci_range_to_resource(struct of_pci_range *range,
++ struct device_node *np,
++ struct resource *res);
+ #else /* CONFIG_OF_ADDRESS && CONFIG_PCI */
+ static inline int of_pci_address_to_resource(struct device_node *dev, int bar,
+ struct resource *r)
+@@ -153,4 +147,3 @@ static inline const __be32 *of_get_pci_address(struct device_node *dev,
+ #endif /* CONFIG_OF_ADDRESS && CONFIG_PCI */
+
+ #endif /* __OF_ADDRESS_H */
+-
diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
-index dde3a4a..71e36d0 100644
+index dde3a4a..1fd207e 100644
--- a/include/linux/of_pci.h
+++ b/include/linux/of_pci.h
-@@ -15,6 +15,9 @@ struct device_node *of_pci_find_child_device(struct device_node *parent,
+@@ -15,6 +15,7 @@ struct device_node *of_pci_find_child_device(struct device_node *parent,
int of_pci_get_devfn(struct device_node *np);
int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin);
int of_pci_parse_bus_range(struct device_node *node, struct resource *res);
-+struct pci_host_bridge *of_create_pci_host_bridge(struct device *parent,
-+ struct pci_ops *ops, void *host_data);
-+
++int of_get_pci_domain_nr(struct device_node *node);
#else
static inline int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq)
{
-@@ -43,6 +46,13 @@ of_pci_parse_bus_range(struct device_node *node, struct resource *res)
+@@ -43,6 +44,18 @@ of_pci_parse_bus_range(struct device_node *node, struct resource *res)
{
return -EINVAL;
}
+
-+static inline struct pci_host_bridge *
-+of_create_pci_host_bridge(struct device *parent, struct pci_ops *ops,
-+ void *host_data)
++static inline int
++of_get_pci_domain_nr(struct device_node *node)
+{
-+ return NULL;
++ return -1;
+}
++#endif
++
++#if defined(CONFIG_OF_ADDRESS)
++int of_pci_get_host_bridge_resources(struct device_node *dev,
++ unsigned char busno, unsigned char bus_max,
++ struct list_head *resources, resource_size_t *io_base);
#endif
#if defined(CONFIG_OF) && defined(CONFIG_PCI_MSI)
diff --git a/include/linux/pci.h b/include/linux/pci.h
-index 61978a4..f582746 100644
+index 96453f9..6d540b9 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
-@@ -401,6 +401,8 @@ struct pci_host_bridge_window {
- struct pci_host_bridge {
- struct device dev;
- struct pci_bus *bus; /* root bus */
-+ int domain_nr;
-+ resource_size_t io_base; /* physical address for the start of I/O area */
- struct list_head windows; /* pci_host_bridge_windows */
- void (*release_fn)(struct pci_host_bridge *);
- void *release_data;
-@@ -769,6 +771,9 @@ struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata);
- struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
- struct pci_ops *ops, void *sysdata,
- struct list_head *resources);
-+struct pci_bus *pci_create_root_bus_in_domain(struct device *parent,
-+ int domain, int bus, struct pci_ops *ops,
-+ void *sysdata, struct list_head *resources);
- int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int busmax);
- int pci_bus_update_busn_res_end(struct pci_bus *b, int busmax);
- void pci_bus_release_busn_res(struct pci_bus *b);
-@@ -1097,6 +1102,9 @@ int __must_check pci_bus_alloc_resource(struct pci_bus *bus,
+@@ -457,6 +457,9 @@ struct pci_bus {
+ unsigned char primary; /* number of primary bridge */
+ unsigned char max_bus_speed; /* enum pci_bus_speed */
+ unsigned char cur_bus_speed; /* enum pci_bus_speed */
++#ifdef CONFIG_PCI_DOMAINS_GENERIC
++ int domain_nr;
++#endif
+
+ char name[48];
+
+@@ -559,15 +562,6 @@ struct pci_ops {
+ int (*write)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
+ };
+
+-/*
+- * ACPI needs to be able to access PCI config space before we've done a
+- * PCI bus scan and created pci_bus structures.
+- */
+-int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
+- int reg, int len, u32 *val);
+-int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
+- int reg, int len, u32 val);
+-
+ struct pci_bus_region {
+ dma_addr_t start;
+ dma_addr_t end;
+@@ -1103,6 +1097,9 @@ int __must_check pci_bus_alloc_resource(struct pci_bus *bus,
resource_size_t),
void *alignf_data);
@@ -2203,22 +5600,89 @@ index 61978a4..f582746 100644
static inline dma_addr_t pci_bus_address(struct pci_dev *pdev, int bar)
{
struct pci_bus_region region;
-@@ -1815,8 +1823,15 @@ static inline void pci_set_of_node(struct pci_dev *dev) { }
- static inline void pci_release_of_node(struct pci_dev *dev) { }
- static inline void pci_set_bus_of_node(struct pci_bus *bus) { }
- static inline void pci_release_bus_of_node(struct pci_bus *bus) { }
+@@ -1288,17 +1285,47 @@ void pci_cfg_access_unlock(struct pci_dev *dev);
+ */
+ #ifdef CONFIG_PCI_DOMAINS
+ extern int pci_domains_supported;
++int pci_get_new_domain_nr(void);
+ #else
+ enum { pci_domains_supported = 0 };
+ static inline int pci_domain_nr(struct pci_bus *bus) { return 0; }
+ static inline int pci_proc_domain(struct pci_bus *bus) { return 0; }
++static inline int pci_get_new_domain_nr(void) { return -ENOSYS; }
+ #endif /* CONFIG_PCI_DOMAINS */
+
++/*
++ * Generic implementation for PCI domain support. If your
++ * architecture does not need custom management of PCI
++ * domains then this implementation will be used
++ */
++#ifdef CONFIG_PCI_DOMAINS_GENERIC
++static inline int pci_domain_nr(struct pci_bus *bus)
++{
++ return bus->domain_nr;
++}
++void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent);
++#else
++static inline void pci_bus_assign_domain_nr(struct pci_bus *bus,
++ struct device *parent)
++{
++}
++#endif
+
- #endif /* CONFIG_OF */
+ /* some architectures require additional setup to direct VGA traffic */
+ typedef int (*arch_set_vga_state_t)(struct pci_dev *pdev, bool decode,
+ unsigned int command_bits, u32 flags);
+ void pci_register_set_vga_state(arch_set_vga_state_t func);
-+/* Used by architecture code to apply any quirks to the list of
-+ * pci_host_bridge resource ranges before they are being used
-+ * by of_create_pci_host_bridge()
++/*
++ * ACPI needs to be able to access PCI config space before we've done a
++ * PCI bus scan and created pci_bus structures.
+ */
-+extern int pcibios_fixup_bridge_ranges(struct list_head *resources);
++int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
++ int reg, int len, u32 *val);
++int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
++ int reg, int len, u32 val);
++void pcibios_penalize_isa_irq(int irq, int active);
+
- #ifdef CONFIG_EEH
- static inline struct eeh_dev *pci_dev_to_eeh_dev(struct pci_dev *pdev)
- {
+ #else /* CONFIG_PCI is not enabled */
+
+ /*
+@@ -1400,8 +1427,26 @@ static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus,
+ unsigned int devfn)
+ { return NULL; }
+
++static inline struct pci_bus *pci_find_bus(int domain, int busnr)
++{ return NULL; }
++
++static inline int pci_bus_write_config_byte(struct pci_bus *bus,
++ unsigned int devfn, int where, u8 val)
++{ return -ENOSYS; }
++
++static inline int raw_pci_read(unsigned int domain, unsigned int bus,
++ unsigned int devfn, int reg, int len, u32 *val)
++{ return -ENOSYS; }
++
++static inline int raw_pci_write(unsigned int domain, unsigned int bus,
++ unsigned int devfn, int reg, int len, u32 val)
++{ return -ENOSYS; }
++
++static inline void pcibios_penalize_isa_irq(int irq, int active) { }
++
+ static inline int pci_domain_nr(struct pci_bus *bus) { return 0; }
+ static inline struct pci_dev *pci_dev_get(struct pci_dev *dev) { return NULL; }
++static inline int pci_get_new_domain_nr(void) { return -ENOSYS; }
+
+ #define dev_is_pci(d) (false)
+ #define dev_is_pf(d) (false)
+@@ -1613,7 +1658,6 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev,
+ enum pcie_reset_state state);
+ int pcibios_add_device(struct pci_dev *dev);
+ void pcibios_release_device(struct pci_dev *dev);
+-void pcibios_penalize_isa_irq(int irq, int active);
+
+ #ifdef CONFIG_HIBERNATE_CALLBACKS
+ extern struct dev_pm_ops pcibios_pm_ops;
diff --git a/tools/perf/arch/arm64/include/perf_regs.h b/tools/perf/arch/arm64/include/perf_regs.h
index e9441b9..1d3f39c 100644
--- a/tools/perf/arch/arm64/include/perf_regs.h
@@ -2232,3 +5696,353 @@ index e9441b9..1d3f39c 100644
#define PERF_REG_IP PERF_REG_ARM64_PC
#define PERF_REG_SP PERF_REG_ARM64_SP
+diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
+index 22fa819..9cd5dbd 100644
+--- a/virt/kvm/arm/arch_timer.c
++++ b/virt/kvm/arm/arch_timer.c
+@@ -21,9 +21,11 @@
+ #include <linux/kvm.h>
+ #include <linux/kvm_host.h>
+ #include <linux/interrupt.h>
++#include <linux/acpi.h>
+
+ #include <clocksource/arm_arch_timer.h>
+ #include <asm/arch_timer.h>
++#include <asm/acpi.h>
+
+ #include <kvm/arm_vgic.h>
+ #include <kvm/arm_arch_timer.h>
+@@ -244,60 +246,92 @@ static const struct of_device_id arch_timer_of_match[] = {
+ {},
+ };
+
+-int kvm_timer_hyp_init(void)
++static int kvm_timer_ppi_parse_dt(unsigned int *ppi)
+ {
+ struct device_node *np;
+- unsigned int ppi;
+- int err;
+-
+- timecounter = arch_timer_get_timecounter();
+- if (!timecounter)
+- return -ENODEV;
+
+ np = of_find_matching_node(NULL, arch_timer_of_match);
+ if (!np) {
+- kvm_err("kvm_arch_timer: can't find DT node\n");
+ return -ENODEV;
+ }
+
+- ppi = irq_of_parse_and_map(np, 2);
+- if (!ppi) {
+- kvm_err("kvm_arch_timer: no virtual timer interrupt\n");
+- err = -EINVAL;
+- goto out;
++ *ppi = irq_of_parse_and_map(np, 2);
++ if (*ppi == 0) {
++ of_node_put(np);
++ return -EINVAL;
+ }
+
+- err = request_percpu_irq(ppi, kvm_arch_timer_handler,
+- "kvm guest timer", kvm_get_running_vcpus());
+- if (err) {
+- kvm_err("kvm_arch_timer: can't request interrupt %d (%d)\n",
+- ppi, err);
+- goto out;
+- }
++ return 0;
++}
+
+- host_vtimer_irq = ppi;
++extern int acadia_kvm_acpi;
++extern int arch_timer_ppi[];
+
+- err = __register_cpu_notifier(&kvm_timer_cpu_nb);
+- if (err) {
+- kvm_err("Cannot register timer CPU notifier\n");
+- goto out_free;
+- }
++static int kvm_timer_ppi_parse_acpi(unsigned int *ppi)
+
+- wqueue = create_singlethread_workqueue("kvm_arch_timer");
+- if (!wqueue) {
+- err = -ENOMEM;
+- goto out_free;
+- }
++{
++ /* retrieve VIRT_PPI info */
++ *ppi = arch_timer_ppi[2];
+
+- kvm_info("%s IRQ%d\n", np->name, ppi);
+- on_each_cpu(kvm_timer_init_interrupt, NULL, 1);
++ if (*ppi == 0)
++ return -EINVAL;
++ else
++ return 0;
++}
++
++int kvm_timer_hyp_init(void)
++{
++ unsigned int ppi;
++ int err;
++
++ timecounter = arch_timer_get_timecounter();
++ if (!timecounter)
++ return -ENODEV;
++
++ /* PPI DT parsing */
++ err = kvm_timer_ppi_parse_dt(&ppi);
+
+- goto out;
++ /* if DT parsing fails, try ACPI next */
++ if (err && !acpi_disabled && acadia_kvm_acpi )
++ err = kvm_timer_ppi_parse_acpi(&ppi);
++
++ if (err) {
++ kvm_err("kvm_timer_hyp_init: can't find virtual timer info or "
++ "config virtual timer interrupt\n");
++ return err;
++ }
++
++ /* configure IRQ handler */
++ err = request_percpu_irq(ppi, kvm_arch_timer_handler,
++ "kvm guest timer", kvm_get_running_vcpus());
++ if (err) {
++ kvm_err("kvm_arch_timer: can't request interrupt %d (%d)\n",
++ ppi, err);
++ goto out;
++ }
++
++ host_vtimer_irq = ppi;
++
++ err = __register_cpu_notifier(&kvm_timer_cpu_nb);
++ if (err) {
++ kvm_err("Cannot register timer CPU notifier\n");
++ goto out_free;
++ }
++
++ wqueue = create_singlethread_workqueue("kvm_arch_timer");
++ if (!wqueue) {
++ err = -ENOMEM;
++ goto out_free;
++ }
++
++ kvm_info("timer IRQ%d\n", ppi);
++ on_each_cpu(kvm_timer_init_interrupt, NULL, 1);
++
++ goto out;
+ out_free:
+- free_percpu_irq(ppi, kvm_get_running_vcpus());
++ free_percpu_irq(ppi, kvm_get_running_vcpus());
+ out:
+- of_node_put(np);
+- return err;
++ return err;
+ }
+
+ void kvm_timer_vcpu_terminate(struct kvm_vcpu *vcpu)
+diff --git a/virt/kvm/arm/vgic-v2.c b/virt/kvm/arm/vgic-v2.c
+index 416baed..53bdd33 100644
+--- a/virt/kvm/arm/vgic-v2.c
++++ b/virt/kvm/arm/vgic-v2.c
+@@ -19,6 +19,7 @@
+ #include <linux/kvm.h>
+ #include <linux/kvm_host.h>
+ #include <linux/interrupt.h>
++#include <linux/acpi.h>
+ #include <linux/io.h>
+ #include <linux/of.h>
+ #include <linux/of_address.h>
+@@ -26,6 +27,7 @@
+
+ #include <linux/irqchip/arm-gic.h>
+
++#include <asm/acpi.h>
+ #include <asm/kvm_emulate.h>
+ #include <asm/kvm_arm.h>
+ #include <asm/kvm_mmu.h>
+@@ -177,7 +179,7 @@ static const struct vgic_ops vgic_v2_ops = {
+ static struct vgic_params vgic_v2_params;
+
+ /**
+- * vgic_v2_probe - probe for a GICv2 compatible interrupt controller in DT
++ * vgic_v2_dt_probe - probe for a GICv2 compatible interrupt controller in DT
+ * @node: pointer to the DT node
+ * @ops: address of a pointer to the GICv2 operations
+ * @params: address of a pointer to HW-specific parameters
+@@ -186,7 +188,7 @@ static struct vgic_params vgic_v2_params;
+ * in *ops and the HW parameters in *params. Returns an error code
+ * otherwise.
+ */
+-int vgic_v2_probe(struct device_node *vgic_node,
++int vgic_v2_dt_probe(struct device_node *vgic_node,
+ const struct vgic_ops **ops,
+ const struct vgic_params **params)
+ {
+@@ -263,3 +265,72 @@ out:
+ of_node_put(vgic_node);
+ return ret;
+ }
++
++struct acpi_madt_generic_interrupt *vgic_acpi;
++static void gic_get_acpi_header(struct acpi_subtable_header *header)
++{
++ vgic_acpi = (struct acpi_madt_generic_interrupt *)header;
++}
++
++int vgic_v2_acpi_probe(const struct vgic_ops **ops,
++ const struct vgic_params **params)
++{
++ struct vgic_params *vgic = &vgic_v2_params;
++ int irq_mode, ret;
++
++ /* MADT table */
++ ret = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
++ (acpi_tbl_entry_handler)gic_get_acpi_header, 0);
++ if (!ret) {
++ pr_err("Failed to get MADT VGIC CPU entry\n");
++ ret = -ENODEV;
++ goto out;
++ }
++
++ /* IRQ trigger mode */
++ irq_mode = (vgic_acpi->flags & ACPI_MADT_VGIC_IRQ_MODE) ?
++ ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
++ /* According to GIC-400 manual, all PPIs are active-LOW, level
++ * sensative. We register IRQ as active-low.
++ */
++ vgic->maint_irq = acpi_register_gsi(NULL, vgic_acpi->vgic_interrupt,
++ irq_mode, ACPI_ACTIVE_LOW);
++ if (!vgic->maint_irq) {
++ pr_err("Cannot register VGIC ACPI maintenance irq\n");
++ ret = -ENXIO;
++ goto out;
++ }
++
++ /* GICH resource */
++ vgic->vctrl_base = ioremap(vgic_acpi->gich_base_address, SZ_8K);
++ if (!vgic->vctrl_base) {
++ pr_err("cannot ioremap GICH memory\n");
++ ret = -ENOMEM;
++ goto out;
++ }
++
++ vgic->nr_lr = readl_relaxed(vgic->vctrl_base + GICH_VTR);
++ vgic->nr_lr = (vgic->nr_lr & 0x3f) + 1;
++
++ ret = create_hyp_io_mappings(vgic->vctrl_base,
++ vgic->vctrl_base + SZ_8K,
++ vgic_acpi->gich_base_address);
++ if (ret) {
++ kvm_err("Cannot map GICH into hyp\n");
++ goto out;
++ }
++
++ vgic->vcpu_base = vgic_acpi->gicv_base_address;
++
++ kvm_info("GICH base=0x%llx, GICV base=0x%llx, IRQ=%d\n",
++ (unsigned long long)vgic_acpi->gich_base_address,
++ (unsigned long long)vgic_acpi->gicv_base_address,
++ vgic->maint_irq);
++
++ vgic->type = VGIC_V2;
++ *ops = &vgic_v2_ops;
++ *params = vgic;
++
++out:
++ return ret;
++}
+diff --git a/virt/kvm/arm/vgic-v3.c b/virt/kvm/arm/vgic-v3.c
+index 1c2c8ee..8b56920 100644
+--- a/virt/kvm/arm/vgic-v3.c
++++ b/virt/kvm/arm/vgic-v3.c
+@@ -173,7 +173,7 @@ static const struct vgic_ops vgic_v3_ops = {
+ static struct vgic_params vgic_v3_params;
+
+ /**
+- * vgic_v3_probe - probe for a GICv3 compatible interrupt controller in DT
++ * vgic_v3_dt_probe - probe for a GICv3 compatible interrupt controller in DT
+ * @node: pointer to the DT node
+ * @ops: address of a pointer to the GICv3 operations
+ * @params: address of a pointer to HW-specific parameters
+@@ -182,9 +182,9 @@ static struct vgic_params vgic_v3_params;
+ * in *ops and the HW parameters in *params. Returns an error code
+ * otherwise.
+ */
+-int vgic_v3_probe(struct device_node *vgic_node,
+- const struct vgic_ops **ops,
+- const struct vgic_params **params)
++int vgic_v3_dt_probe(struct device_node *vgic_node,
++ const struct vgic_ops **ops,
++ const struct vgic_params **params)
+ {
+ int ret = 0;
+ u32 gicv_idx;
+diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
+index 73eba79..ca98a3b 100644
+--- a/virt/kvm/arm/vgic.c
++++ b/virt/kvm/arm/vgic.c
+@@ -25,9 +25,11 @@
+ #include <linux/of_address.h>
+ #include <linux/of_irq.h>
+ #include <linux/uaccess.h>
++#include <linux/acpi.h>
+
+ #include <linux/irqchip/arm-gic.h>
+
++#include <asm/acpi.h>
+ #include <asm/kvm_emulate.h>
+ #include <asm/kvm_arm.h>
+ #include <asm/kvm_mmu.h>
+@@ -1549,31 +1551,39 @@ static struct notifier_block vgic_cpu_nb = {
+ };
+
+ static const struct of_device_id vgic_ids[] = {
+- { .compatible = "arm,cortex-a15-gic", .data = vgic_v2_probe, },
+- { .compatible = "arm,gic-v3", .data = vgic_v3_probe, },
++ { .compatible = "arm,cortex-a15-gic", .data = vgic_v2_dt_probe, },
++ { .compatible = "arm,gic-v3", .data = vgic_v3_dt_probe, },
+ {},
+ };
+
++extern int acadia_kvm_acpi;
++
+ int kvm_vgic_hyp_init(void)
+ {
+ const struct of_device_id *matched_id;
+ int (*vgic_probe)(struct device_node *,const struct vgic_ops **,
+ const struct vgic_params **);
+ struct device_node *vgic_node;
+- int ret;
++ int ret = -ENODEV;
+
+- vgic_node = of_find_matching_node_and_match(NULL,
+- vgic_ids, &matched_id);
+- if (!vgic_node) {
+- kvm_err("error: no compatible GIC node found\n");
+- return -ENODEV;
++ /* probe VGIC */
++ if (vgic_node = of_find_matching_node_and_match(NULL,
++ vgic_ids, &matched_id)) {
++ /* probe VGIC in DT */
++ vgic_probe = matched_id->data;
++ ret = vgic_probe(vgic_node, &vgic_ops, &vgic);
++ }
++ else if (!acpi_disabled && acadia_kvm_acpi) {
++ /* probe VGIC in ACPI */
++ ret = vgic_v2_acpi_probe(&vgic_ops, &vgic);
+ }
+
+- vgic_probe = matched_id->data;
+- ret = vgic_probe(vgic_node, &vgic_ops, &vgic);
+- if (ret)
++ if (ret) {
++ kvm_err("error: no compatible GIC info found\n");
+ return ret;
++ }
+
++ /* configuration */
+ ret = request_percpu_irq(vgic->maint_irq, vgic_maintenance_handler,
+ "vgic", kvm_get_running_vcpus());
+ if (ret) {
diff --git a/kernel.spec b/kernel.spec
index 47787cfb7..7196ab85f 100644
--- a/kernel.spec
+++ b/kernel.spec
@@ -2223,6 +2223,9 @@ fi
# ||----w |
# || ||
%changelog
+* Mon Sep 29 2014 Kyle McMartin <kyle@fedoraproject.org>
+- Update kernel-arm64.patch from git.
+
* Mon Sep 29 2014 Josh Boyer <jwboyer@fedoraproject.org> - 3.17.0-0.rc7.git0.1
- Linux v3.17-rc7