fix for firmware recovery on certain RPi4 HW revs

2 files changed, 93 insertions, 0 deletions

diff --git a/kernel.spec b/kernel.spec
index ae4a7ca60..1716bb1e0 100644
--- a/kernel.spec
+++ b/kernel.spec
@@ -826,6 +826,8 @@ Patch311: ARM-Enable-thermal-support-for-Raspberry-Pi-4.patch
 Patch312: bcm283x-gpu-drm-v3d-Add-ARCH_BCM2835-to-DRM_V3D-Kconfig.patch
 # https://patchwork.kernel.org/cover/11353083/
 Patch313: arm64-pinctrl-bcm2835-Add-support-for-all-BCM2711-GPIOs.patch
+# https://github.com/raspberrypi/linux/commit/c74b1b53254016fd83b580b8d49bb02d72ce4836
+Patch314: usb-xhci-Raspberry-Pi-FW-loader-for-VIA-VL805.patch
 
 # Tegra bits
 Patch320: arm64-tegra-jetson-tx1-fixes.patch
diff --git a/usb-xhci-Raspberry-Pi-FW-loader-for-VIA-VL805.patch b/usb-xhci-Raspberry-Pi-FW-loader-for-VIA-VL805.patch
new file mode 100644
index 000000000..7bf875c6d
--- /dev/null
+++ b/usb-xhci-Raspberry-Pi-FW-loader-for-VIA-VL805.patch
@@ -0,0 +1,91 @@
+From eb05efbfe58a7815957844e6dbe28735e85393cf Mon Sep 17 00:00:00 2001
+From: Tim Gover <990920+timg236@users.noreply.github.com>
+Date: Wed, 15 Jan 2020 11:26:19 +0000
+Subject: [PATCH] usb: xhci: Raspberry Pi FW loader for VIA VL805
+
+The VL805 FW may either be loaded from an SPI EEPROM or alternatively
+loaded directly by the VideoCore firmware. A PCI reset will reset
+the VL805 XHCI controller on the Raspberry Pi4 requiring the firmware
+to be reloaded if an SPI EEPROM is not present.
+
+Use a VideoCore mailbox to trigger the loading of the VL805
+firmware (if necessary) after a PCI reset.
+
+Signed-off-by: Tim Gover <tim.gover@raspberrypi.org>
+---
+ drivers/usb/host/pci-quirks.c              | 31 +++++++++++++++++++++-
+ include/soc/bcm2835/raspberrypi-firmware.h |  2 +-
+ 2 files changed, 31 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
+index 6c7f0a876b96..c3367b053044 100644
+--- a/drivers/usb/host/pci-quirks.c
++++ b/drivers/usb/host/pci-quirks.c
+@@ -18,7 +18,7 @@
+ #include <linux/dmi.h>
+ #include "pci-quirks.h"
+ #include "xhci-ext-caps.h"
+-
++#include <soc/bcm2835/raspberrypi-firmware.h>
+ 
+ #define UHCI_USBLEGSUP		0xc0		/* legacy support */
+ #define UHCI_USBCMD		0		/* command register */
+@@ -630,6 +630,32 @@ bool usb_amd_pt_check_port(struct device *device, int port)
+ }
+ EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
+ 
++/* The VL805 firmware may either be loaded from an EEPROM or by the BIOS into
++ * memory. If run from memory it must be reloaded after a PCI fundmental reset.
++ * The Raspberry Pi firmware acts as the BIOS in this case.
++ */
++static void usb_vl805_init(struct pci_dev *pdev)
++{
++#if IS_ENABLED(CONFIG_RASPBERRYPI_FIRMWARE)
++	struct rpi_firmware *fw;
++	struct {
++		u32 dev_addr;
++	} packet;
++	int ret;
++
++	fw = rpi_firmware_get(NULL);
++	if (!fw)
++		return;
++
++	packet.dev_addr = (pdev->bus->number << 20) |
++		(PCI_SLOT(pdev->devfn) << 15) | (PCI_FUNC(pdev->devfn) << 12);
++
++	dev_dbg(&pdev->dev, "RPI_FIRMWARE_NOTIFY_XHCI_RESET %x", packet.dev_addr);
++	ret = rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET,
++			&packet, sizeof(packet));
++#endif
++}
++
+ /*
+  * Make sure the controller is completely inactive, unable to
+  * generate interrupts or do DMA.
+@@ -1207,6 +1233,9 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev)
+ 	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+ 		usb_enable_intel_xhci_ports(pdev);
+ 
++	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483)
++		usb_vl805_init(pdev);
++
+ 	op_reg_base = base + XHCI_HC_LENGTH(readl(base));
+ 
+ 	/* Wait for the host controller to be ready before writing any
+diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h
+index 7800e12ee042..cc9cdbc66403 100644
+--- a/include/soc/bcm2835/raspberrypi-firmware.h
++++ b/include/soc/bcm2835/raspberrypi-firmware.h
+@@ -90,7 +90,7 @@ enum rpi_firmware_property_tag {
+ 	RPI_FIRMWARE_SET_PERIPH_REG =                         0x00038045,
+ 	RPI_FIRMWARE_GET_POE_HAT_VAL =                        0x00030049,
+ 	RPI_FIRMWARE_SET_POE_HAT_VAL =                        0x00030050,
+-
++	RPI_FIRMWARE_NOTIFY_XHCI_RESET =                      0x00030058,
+ 
+ 	/* Dispmanx TAGS */
+ 	RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE =                   0x00040001,
+-- 
+2.24.1
+