pull in new utilite patch for 4.7

1 files changed, 133 insertions, 16 deletions

diff --git a/arm-i.MX6-Utilite-device-dtb.patch b/arm-i.MX6-Utilite-device-dtb.patch
index 4437560b5..efffd77bd 100644
--- a/arm-i.MX6-Utilite-device-dtb.patch
+++ b/arm-i.MX6-Utilite-device-dtb.patch
@@ -176,42 +176,159 @@ Signed-off-by: Christopher Spinrath <christopher.spinrath@xxxxxxxxxxxxxx>
  1 file changed, 136 insertions(+)
 
 diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
-index 99b46f8030ad..8b6ddd16dcc5 100644
+index 99b46f8..f4fc22e 100644
 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
 +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
-@@ -97,11 +97,49 @@
+@@ -31,6 +31,61 @@
+ 			linux,default-trigger = "heartbeat";
+ 		};
+ 	};
++
++	regulators {
++		compatible = "simple-bus";
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		reg_usb_otg_vbus: usb_otg_vbus {
++			compatible = "regulator-fixed";
++			regulator-name = "usb_otg_vbus";
++			regulator-min-microvolt = <5000000>;
++			regulator-max-microvolt = <5000000>;
++			gpio = <&gpio3 22 0>;
++			enable-active-high;
++		};
++
++		reg_usb_h1_vbus: usb_h1_vbus {
++			compatible = "regulator-fixed";
++			regulator-name = "usb_h1_vbus";
++			regulator-min-microvolt = <5000000>;
++			regulator-max-microvolt = <5000000>;
++			gpio = <&gpio7 8 0>;
++			enable-active-high;
++		};
++	};
++};
++
++&ecspi1 {
++	fsl,spi-num-chipselects = <2>;
++	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_ecspi1>;
++	status = "okay";
++
++	flash: m25p80@0 {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		compatible = "st,m25p", "jedec,spi-nor";
++		spi-max-frequency = <20000000>;
++		reg = <0>;
++
++		partition@0 {
++			label = "uboot";
++			reg = <0x0 0xc0000>;
++		};
++
++		partition@c0000 {
++			label = "uboot environment";
++			reg = <0xc0000 0x40000>;
++		};
++
++		partition@100000 {
++			label = "reserved";
++			reg = <0x100000 0x100000>;
++		};
++	};
+ };
+ 
+ &fec {
+@@ -46,8 +101,31 @@
+ 	status = "okay";
+ };
+ 
++&i2c3 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_i2c3>;
++	status = "okay";
++	clock-frequency = <100000>;
++
++	eeprom@50 {
++		compatible = "at24,24c02";
++		reg = <0x50>;
++		pagesize = <16>;
++	};
++};
++
+ &iomuxc {
+ 	imx6q-cm-fx6 {
++		pinctrl_ecspi1: ecspi1grp {
++			fsl,pins = <
++				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		 0x100b1
++				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		 0x100b1
++				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		 0x100b1
++				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x100b1
++				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x100b1
++			>;
++		};
++
+ 		pinctrl_enet: enetgrp {
+ 			fsl,pins = <
+ 				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+@@ -91,17 +169,75 @@
+ 			>;
+ 		};
+ 
++		pinctrl_i2c3: i2c3grp {
++			fsl,pins = <
++				MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
++				MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
++			>;
++		};
++
++		pinctrl_pcie: pciegrp {
++			fsl,pins = <
++				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000
++				MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x80000000
++			>;
++		};
++
+ 		pinctrl_uart4: uart4grp {
+ 			fsl,pins = <
+ 				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
  				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
  			>;
  		};
 +
-+		pinctrl_usdhc1: usdhc1grp {
++		pinctrl_usbh1: usbh1grp {
 +			fsl,pins = <
-+				MX6QDL_PAD_SD1_CMD__SD1_CMD             0x17059
-+				MX6QDL_PAD_SD1_CLK__SD1_CLK             0x10059
-+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0          0x17059
-+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1          0x17059
-+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2          0x17059
-+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3          0x17059
++				MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x80000000
 +			>;
 +		};
 +
-+		pinctrl_usdhc3: usdhc3grp {
++		pinctrl_usbotg: usbotggrp {
 +			fsl,pins = <
-+				MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
-+				MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
-+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
-+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
-+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
-+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
++				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
++				MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000
 +			>;
 +		};
  	};
  };
  
++&pcie {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_pcie>;
++	reset-gpio = <&gpio1 26 0>;
++	power-on-gpio = <&gpio2 24 0>;
++	status = "okay";
++};
++
 +&sata {
 +	status = "okay";
 +};
 +
++&snvs_poweroff {
++	status = "okay";
++};
++
  &uart4 {
  	pinctrl-names = "default";
  	pinctrl-0 = <&pinctrl_uart4>;