summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJeremy Cline <jcline@redhat.com>2018-08-24 09:44:58 -0400
committerJeremy Cline <jcline@redhat.com>2018-08-24 09:44:58 -0400
commit28d87ac04509aac2e38c73faf570a121e23318e1 (patch)
tree987db62993ab5014fc09c4ce4df03d989aab02bf
parent9b4f0fa7126b0cc7bacaaeb466e823f812c824c6 (diff)
downloadkernel-28d87ac04509aac2e38c73faf570a121e23318e1.tar.gz
kernel-28d87ac04509aac2e38c73faf570a121e23318e1.tar.xz
kernel-28d87ac04509aac2e38c73faf570a121e23318e1.zip
Linux v4.18-12721-g33e17876ea4e
-rw-r--r--0005-efi-bgrt-Drop-__initdata-from-bgrt_image_size.patch33
-rw-r--r--0006-efifb-Copy-the-ACPI-BGRT-boot-graphics-to-the-frameb.patch201
-rw-r--r--0007-efifb-BGRT-Do-not-copy-the-boot-graphics-for-non-nat.patch85
-rw-r--r--0009-fbcon-Only-defer-console-takeover-if-the-current-con.patch100
-rw-r--r--0010-fbcon-Do-not-takeover-the-console-from-atomic-contex.patch63
-rw-r--r--arm-dts-armada388-helios4.patch352
-rw-r--r--bcm2835-hwmon-Add-support-for-RPi-voltage-sensor.patch373
-rw-r--r--bcm2837-enable-pmu.patch33
-rw-r--r--configs/fedora/generic/CONFIG_ARCH_K31
-rw-r--r--configs/fedora/generic/CONFIG_RESET_QCOM_AOSS1
-rw-r--r--configs/fedora/generic/CONFIG_SUN50I_DE2_BUS1
-rw-r--r--configs/fedora/generic/CONFIG_UBIFS_FS_XATTR1
-rw-r--r--configs/fedora/generic/arm/aarch64/CONFIG_SUN50I_DE2_BUS1
-rw-r--r--gitrev2
-rw-r--r--kernel-aarch64-debug.config4
-rw-r--r--kernel-aarch64.config4
-rw-r--r--kernel-armv7hl-debug.config4
-rw-r--r--kernel-armv7hl-lpae-debug.config4
-rw-r--r--kernel-armv7hl-lpae.config4
-rw-r--r--kernel-armv7hl.config4
-rw-r--r--kernel-i686-PAE.config4
-rw-r--r--kernel-i686-PAEdebug.config4
-rw-r--r--kernel-i686-debug.config4
-rw-r--r--kernel-i686.config4
-rw-r--r--kernel-ppc64le-debug.config4
-rw-r--r--kernel-ppc64le.config4
-rw-r--r--kernel-s390x-debug.config4
-rw-r--r--kernel-s390x.config4
-rw-r--r--kernel-x86_64-debug.config4
-rw-r--r--kernel-x86_64.config4
-rw-r--r--kernel.spec18
-rw-r--r--sources2
32 files changed, 75 insertions, 1256 deletions
diff --git a/0005-efi-bgrt-Drop-__initdata-from-bgrt_image_size.patch b/0005-efi-bgrt-Drop-__initdata-from-bgrt_image_size.patch
deleted file mode 100644
index ec1ff7fbc..000000000
--- a/0005-efi-bgrt-Drop-__initdata-from-bgrt_image_size.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 421b8aef3902426c4c3ebd23218c0ad282786e1d Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Tue, 3 Jul 2018 17:43:10 +0200
-Subject: [PATCH 5/7] efi/bgrt: Drop __initdata from bgrt_image_size
-
-bgrt_image_size is necessary to (optionally) show the boot graphics from
-the efifb code. The efifb driver is a platform driver, using a normal
-driver probe() driver callback. So even though it is always builtin it
-cannot reference __initdata.
-
-Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
----
- drivers/firmware/efi/efi-bgrt.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/drivers/firmware/efi/efi-bgrt.c b/drivers/firmware/efi/efi-bgrt.c
-index 50793fda7819..b22ccfb0c991 100644
---- a/drivers/firmware/efi/efi-bgrt.c
-+++ b/drivers/firmware/efi/efi-bgrt.c
-@@ -20,7 +20,7 @@
- #include <linux/efi-bgrt.h>
-
- struct acpi_table_bgrt bgrt_tab;
--size_t __initdata bgrt_image_size;
-+size_t bgrt_image_size;
-
- struct bmp_header {
- u16 id;
---
-2.18.0
-
diff --git a/0006-efifb-Copy-the-ACPI-BGRT-boot-graphics-to-the-frameb.patch b/0006-efifb-Copy-the-ACPI-BGRT-boot-graphics-to-the-frameb.patch
deleted file mode 100644
index 248b34335..000000000
--- a/0006-efifb-Copy-the-ACPI-BGRT-boot-graphics-to-the-frameb.patch
+++ /dev/null
@@ -1,201 +0,0 @@
-From a5f742d7ba70c702bcf67dd1fd8d5dde3f5042fc Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Tue, 3 Jul 2018 17:43:10 +0200
-Subject: [PATCH 6/7] efifb: Copy the ACPI BGRT boot graphics to the
- framebuffer
-
-On systems where fbcon is configured for deferred console takeover, the
-intend is for the framebuffer to show the boot graphics (e.g a vendor
-logo) until some message (e.g. an error) is printed or a graphical
-session takes over.
-
-Some firmware relies on the OS to show the boot graphics.
-
-This patch adds support to efifb to show the boot graphics and
-automatically enables this when fbcon is configured for deferred
-console takeover.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
----
- drivers/video/fbdev/efifb.c | 140 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 140 insertions(+)
-
-diff --git a/drivers/video/fbdev/efifb.c b/drivers/video/fbdev/efifb.c
-index c6f78d27947b..67684412ba8a 100644
---- a/drivers/video/fbdev/efifb.c
-+++ b/drivers/video/fbdev/efifb.c
-@@ -9,16 +9,39 @@
-
- #include <linux/kernel.h>
- #include <linux/efi.h>
-+#include <linux/efi-bgrt.h>
- #include <linux/errno.h>
- #include <linux/fb.h>
- #include <linux/pci.h>
- #include <linux/platform_device.h>
-+#include <linux/printk.h>
- #include <linux/screen_info.h>
- #include <video/vga.h>
- #include <asm/efi.h>
- #include <drm/drm_utils.h> /* For drm_get_panel_orientation_quirk */
- #include <drm/drm_connector.h> /* For DRM_MODE_PANEL_ORIENTATION_* */
-
-+struct bmp_file_header {
-+ u16 id;
-+ u32 file_size;
-+ u32 reserved;
-+ u32 bitmap_offset;
-+} __packed;
-+
-+struct bmp_dib_header {
-+ u32 dib_header_size;
-+ s32 width;
-+ s32 height;
-+ u16 planes;
-+ u16 bpp;
-+ u32 compression;
-+ u32 bitmap_size;
-+ u32 horz_resolution;
-+ u32 vert_resolution;
-+ u32 colors_used;
-+ u32 colors_important;
-+} __packed;
-+
- static bool request_mem_succeeded = false;
- static u64 mem_flags = EFI_MEMORY_WC | EFI_MEMORY_UC;
-
-@@ -66,6 +89,121 @@ static int efifb_setcolreg(unsigned regno, unsigned red, unsigned green,
- return 0;
- }
-
-+/*
-+ * If fbcon deffered console takeover is configured, the intent is for the
-+ * framebuffer to show the boot graphics (e.g. vendor logo) until there is some
-+ * (error) message to display. But the boot graphics may have been destroyed by
-+ * e.g. option ROM output, detect this and restore the boot graphics.
-+ */
-+#if defined CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER && \
-+ defined CONFIG_ACPI_BGRT
-+static void efifb_copy_bmp(u8 *src, u32 *dst, int width, struct screen_info *si)
-+{
-+ u8 r, g, b;
-+
-+ while (width--) {
-+ b = *src++;
-+ g = *src++;
-+ r = *src++;
-+ *dst++ = (r << si->red_pos) |
-+ (g << si->green_pos) |
-+ (b << si->blue_pos);
-+ }
-+}
-+
-+static void efifb_show_boot_graphics(struct fb_info *info)
-+{
-+ u32 bmp_width, bmp_height, bmp_pitch, screen_pitch, dst_x, y, src_y;
-+ struct screen_info *si = &screen_info;
-+ struct bmp_file_header *file_header;
-+ struct bmp_dib_header *dib_header;
-+ void *bgrt_image = NULL;
-+ u8 *dst = info->screen_base;
-+
-+ if (!bgrt_tab.image_address) {
-+ pr_info("efifb: No BGRT, not showing boot graphics\n");
-+ return;
-+ }
-+
-+ /* Avoid flashing the logo if we're going to print std probe messages */
-+ if (console_loglevel > CONSOLE_LOGLEVEL_QUIET)
-+ return;
-+
-+ /* bgrt_tab.status is unreliable, so we don't check it */
-+
-+ if (si->lfb_depth != 32) {
-+ pr_info("efifb: not 32 bits, not showing boot graphics\n");
-+ return;
-+ }
-+
-+ bgrt_image = memremap(bgrt_tab.image_address, bgrt_image_size,
-+ MEMREMAP_WB);
-+ if (!bgrt_image) {
-+ pr_warn("efifb: Ignoring BGRT: failed to map image memory\n");
-+ return;
-+ }
-+
-+ if (bgrt_image_size < (sizeof(*file_header) + sizeof(*dib_header)))
-+ goto error;
-+
-+ file_header = bgrt_image;
-+ if (file_header->id != 0x4d42 || file_header->reserved != 0)
-+ goto error;
-+
-+ dib_header = bgrt_image + sizeof(*file_header);
-+ if (dib_header->dib_header_size != 40 || dib_header->width < 0 ||
-+ dib_header->planes != 1 || dib_header->bpp != 24 ||
-+ dib_header->compression != 0)
-+ goto error;
-+
-+ bmp_width = dib_header->width;
-+ bmp_height = abs(dib_header->height);
-+ bmp_pitch = round_up(3 * bmp_width, 4);
-+ screen_pitch = si->lfb_linelength;
-+
-+ if ((file_header->bitmap_offset + bmp_pitch * bmp_height) >
-+ bgrt_image_size)
-+ goto error;
-+
-+ if ((bgrt_tab.image_offset_x + bmp_width) > si->lfb_width ||
-+ (bgrt_tab.image_offset_y + bmp_height) > si->lfb_height)
-+ goto error;
-+
-+ pr_info("efifb: showing boot graphics\n");
-+
-+ for (y = 0; y < si->lfb_height; y++, dst += si->lfb_linelength) {
-+ /* Only background? */
-+ if (y < bgrt_tab.image_offset_y ||
-+ y >= (bgrt_tab.image_offset_y + bmp_height)) {
-+ memset(dst, 0, 4 * si->lfb_width);
-+ continue;
-+ }
-+
-+ src_y = y - bgrt_tab.image_offset_y;
-+ /* Positive header height means upside down row order */
-+ if (dib_header->height > 0)
-+ src_y = (bmp_height - 1) - src_y;
-+
-+ memset(dst, 0, bgrt_tab.image_offset_x * 4);
-+ dst_x = bgrt_tab.image_offset_x;
-+ efifb_copy_bmp(bgrt_image + file_header->bitmap_offset +
-+ src_y * bmp_pitch,
-+ (u32 *)dst + dst_x, bmp_width, si);
-+ dst_x += bmp_width;
-+ memset((u32 *)dst + dst_x, 0, (si->lfb_width - dst_x) * 4);
-+ }
-+
-+ memunmap(bgrt_image);
-+ return;
-+
-+error:
-+ memunmap(bgrt_image);
-+ pr_warn("efifb: Ignoring BGRT: unexpected or invalid BMP data\n");
-+}
-+#else
-+static inline void efifb_show_boot_graphics(struct fb_info *info) {}
-+#endif
-+
- static void efifb_destroy(struct fb_info *info)
- {
- if (info->screen_base) {
-@@ -311,6 +449,8 @@ static int efifb_probe(struct platform_device *dev)
- goto err_release_fb;
- }
-
-+ efifb_show_boot_graphics(info);
-+
- pr_info("efifb: framebuffer at 0x%lx, using %dk, total %dk\n",
- efifb_fix.smem_start, size_remap/1024, size_total/1024);
- pr_info("efifb: mode is %dx%dx%d, linelength=%d, pages=%d\n",
---
-2.18.0
-
diff --git a/0007-efifb-BGRT-Do-not-copy-the-boot-graphics-for-non-nat.patch b/0007-efifb-BGRT-Do-not-copy-the-boot-graphics-for-non-nat.patch
deleted file mode 100644
index 4b84688e1..000000000
--- a/0007-efifb-BGRT-Do-not-copy-the-boot-graphics-for-non-nat.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From c4220b3f747ae6dd28171137d85fba0eab64e36d Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Tue, 24 Jul 2018 19:11:28 +0200
-Subject: [PATCH 7/7] efifb: BGRT: Do not copy the boot graphics for non native
- resolutions
-
-On x86 some firmwares use a low non native resolution for the display when
-they have shown some text messages. While keeping the bgrt filled with info
-for the native resolution. If the bgrt image intended for the native
-resolution still fits, it will be displayed very close to the right edge of
-the display looking quite bad.
-
-This commits adds a (heuristics based) checks for this and makes efifb
-not show the boot graphics when this is the case.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
----
- drivers/video/fbdev/efifb.c | 43 +++++++++++++++++++++++++++++++++++++
- 1 file changed, 43 insertions(+)
-
-diff --git a/drivers/video/fbdev/efifb.c b/drivers/video/fbdev/efifb.c
-index fa01eecc0a55..52bf39f93888 100644
---- a/drivers/video/fbdev/efifb.c
-+++ b/drivers/video/fbdev/efifb.c
-@@ -111,6 +111,46 @@ static void efifb_copy_bmp(u8 *src, u32 *dst, int width, struct screen_info *si)
- }
- }
-
-+#ifdef CONFIG_X86
-+/*
-+ * On x86 some firmwares use a low non native resolution for the display when
-+ * they have shown some text messages. While keeping the bgrt filled with info
-+ * for the native resolution. If the bgrt image intended for the native
-+ * resolution still fits, it will be displayed very close to the right edge of
-+ * the display looking quite bad. This function checks for this.
-+ */
-+static bool efifb_bgrt_sanity_check(struct screen_info *si, u32 bmp_width)
-+{
-+ static const int default_resolutions[][2] = {
-+ { 800, 600 },
-+ { 1024, 768 },
-+ { 1280, 1024 },
-+ };
-+ u32 i, right_margin;
-+
-+ for (i = 0; i < ARRAY_SIZE(default_resolutions); i++) {
-+ if (default_resolutions[i][0] == si->lfb_width &&
-+ default_resolutions[i][1] == si->lfb_height)
-+ break;
-+ }
-+ /* If not a default resolution used for textmode, this should be fine */
-+ if (i >= ARRAY_SIZE(default_resolutions))
-+ return true;
-+
-+ /* If the right margin is 5 times smaller then the left one, reject */
-+ right_margin = si->lfb_width - (bgrt_tab.image_offset_x + bmp_width);
-+ if (right_margin < (bgrt_tab.image_offset_x / 5))
-+ return false;
-+
-+ return true;
-+}
-+#else
-+static bool efifb_bgrt_sanity_check(struct screen_info *si, u32 bmp_width)
-+{
-+ return true;
-+}
-+#endif
-+
- static void efifb_show_boot_graphics(struct fb_info *info)
- {
- u32 bmp_width, bmp_height, bmp_pitch, screen_pitch, dst_x, y, src_y;
-@@ -169,6 +209,9 @@ static void efifb_show_boot_graphics(struct fb_info *info)
- (bgrt_tab.image_offset_y + bmp_height) > si->lfb_height)
- goto error;
-
-+ if (!efifb_bgrt_sanity_check(si, bmp_width))
-+ goto error;
-+
- pr_info("efifb: showing boot graphics\n");
-
- for (y = 0; y < si->lfb_height; y++, dst += si->lfb_linelength) {
---
-2.18.0
-
diff --git a/0009-fbcon-Only-defer-console-takeover-if-the-current-con.patch b/0009-fbcon-Only-defer-console-takeover-if-the-current-con.patch
deleted file mode 100644
index 8735a62eb..000000000
--- a/0009-fbcon-Only-defer-console-takeover-if-the-current-con.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From 317b698406457eb97277d4220126683a59c74fd8 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 1 Aug 2018 15:19:52 +0200
-Subject: [PATCH] fbcon: Only defer console takeover if the current
- console driver is the dummycon
-
-We rely on dummycon's output notifier mechanism to defer the takeover.
-
-If say vgacon is the current console driver then dummycon will never get
-used so its output notifier will also never get called and fbcon never
-takes over. This commit fixes this by only deferring the console takeover
-if the current console driver is the dummycon driver.
-
-This commit also moves the entirety of fbcon_start under the console_lock,
-since the conswitchp which fbcon_start now checks is protected by it.
-
-This commit also inlines fbcon_register_output_notifier, since we now
-need a #ifdef CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER in fbcon_start
-anyways because of the write access to the deferred_takeover variable,
-this has the added advantage that it puts the
-dummycon_register_output_notifier() call directly after the "conswitchp !=
-&dummy_con" comparison making it clear why that check is there.
-
-Note the arch setup code will set conswitchp to either dummy_con or
-vga_con, in the cases where it gets set to vga_con even though their is
-no vga_con present we rely on vga_con_startup() to set conswitchp to
-dummy_con. vga_con_startup() is guaranteed to happen before
-fb_console_init() as it gets called as a console_initcall where as
-fb_console_init() gets called as a subsys_initcall.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/video/fbdev/core/fbcon.c | 24 ++++++++++--------------
- 1 file changed, 10 insertions(+), 14 deletions(-)
-
-diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
-index e30d3a138c97..ef8b2d0b7071 100644
---- a/drivers/video/fbdev/core/fbcon.c
-+++ b/drivers/video/fbdev/core/fbcon.c
-@@ -3612,38 +3612,34 @@ static int fbcon_output_notifier(struct notifier_block *nb,
-
- return NOTIFY_OK;
- }
--
--static void fbcon_register_output_notifier(void)
--{
-- fbcon_output_nb.notifier_call = fbcon_output_notifier;
-- dummycon_register_output_notifier(&fbcon_output_nb);
--}
--#else
--static inline void fbcon_register_output_notifier(void) {}
- #endif
-
- static void fbcon_start(void)
- {
-+ WARN_CONSOLE_UNLOCKED();
-+
-+#ifdef CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER
-+ if (conswitchp != &dummy_con)
-+ deferred_takeover = false;
-+
- if (deferred_takeover) {
-- fbcon_register_output_notifier();
-+ fbcon_output_nb.notifier_call = fbcon_output_notifier;
-+ dummycon_register_output_notifier(&fbcon_output_nb);
- return;
- }
-+#endif
-
- if (num_registered_fb) {
- int i;
-
-- console_lock();
--
- for (i = 0; i < FB_MAX; i++) {
- if (registered_fb[i] != NULL) {
- info_idx = i;
- break;
- }
- }
-
- do_fbcon_takeover(0);
-- console_unlock();
--
- }
- }
-
-@@ -3724,8 +3720,8 @@ void __init fb_console_init(void)
- for (i = 0; i < MAX_NR_CONSOLES; i++)
- con2fb_map[i] = -1;
-
-- console_unlock();
- fbcon_start();
-+ console_unlock();
- }
-
- #ifdef MODULE
---
-2.18.0
-
diff --git a/0010-fbcon-Do-not-takeover-the-console-from-atomic-contex.patch b/0010-fbcon-Do-not-takeover-the-console-from-atomic-contex.patch
deleted file mode 100644
index 254834e4b..000000000
--- a/0010-fbcon-Do-not-takeover-the-console-from-atomic-contex.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 8f571bbfc621fd0826bbc7a8924c811f3a3167c9 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Mon, 6 Aug 2018 16:32:27 +0200
-Subject: [PATCH] fbcon: Do not takeover the console from atomic context
-
-Taking over the console involves allocating mem with GFP_KERNEL, talking
-to drm drivers, etc. So this should not be done from an atomic context.
-
-But the console-output trigger deferred console takeover may happen from an
-atomic context, which leads to "BUG: sleeping function called from invalid
-context" errors.
-
-This commit fixes these errors by doing the deferred takeover from a
-workqueue when the notifier runs from an atomic context.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/video/fbdev/core/fbcon.c | 21 +++++++++++++++++++--
- 1 file changed, 19 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
-index a3fd510..f812891 100644
---- a/drivers/video/fbdev/core/fbcon.c
-+++ b/drivers/video/fbdev/core/fbcon.c
-@@ -3596,7 +3596,22 @@ static int fbcon_init_device(void)
- }
-
- #ifdef CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER
-+static void fbcon_register_existing_fbs(struct work_struct *work)
-+{
-+ int i;
-+
-+ console_lock();
-+
-+ for (i = 0; i < FB_MAX; i++) {
-+ if (registered_fb[i])
-+ fbcon_fb_registered(registered_fb[i]);
-+ }
-+
-+ console_unlock();
-+}
-+
- static struct notifier_block fbcon_output_nb;
-+static DECLARE_WORK(fbcon_deferred_takeover_work, fbcon_register_existing_fbs);
-
- static int fbcon_output_notifier(struct notifier_block *nb,
- unsigned long action, void *data)
-@@ -3611,10 +3626,8 @@ static int fbcon_output_notifier(struct notifier_block *nb,
- deferred_takeover = false;
- logo_shown = FBCON_LOGO_DONTSHOW;
-
-- for (i = 0; i < FB_MAX; i++) {
-- if (registered_fb[i])
-- fbcon_fb_registered(registered_fb[i]);
-- }
-+ /* We may get called in atomic context */
-+ schedule_work(&fbcon_deferred_takeover_work);
-
- return NOTIFY_OK;
- }
---
-2.18.0
-
diff --git a/arm-dts-armada388-helios4.patch b/arm-dts-armada388-helios4.patch
deleted file mode 100644
index abfbbc299..000000000
--- a/arm-dts-armada388-helios4.patch
+++ /dev/null
@@ -1,352 +0,0 @@
-From ced8025b569e21c31b52cc80410ed49d0bf13368 Mon Sep 17 00:00:00 2001
-From: Dennis Gilmore <dennis@ausil.us>
-Date: Tue, 5 Jun 2018 17:15:45 -0500
-Subject: ARM: dts: armada388-helios4
-
-The helios4 is a Armada388 based nas board designed by SolidRun and
-based on their SOM. It is sold by kobol.io the dts file came from
-https://raw.githubusercontent.com/armbian/build/master/patch/kernel/mvebu-default/95-helios4-device-tree.patch
-I added a SPDX license line to match the clearfog it says it was based
-on and a compatible line for "kobol,helios4"
-
-Signed-off-by: Dennis Gilmore <dennis@ausil.us>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/armada-388-helios4.dts | 313 +++++++++++++++++++++++++++++++
- 2 files changed, 314 insertions(+)
- create mode 100644 arch/arm/boot/dts/armada-388-helios4.dts
-
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 37a3de760d40..55133fac83ab 100644
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -1138,6 +1138,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
- armada-388-clearfog-pro.dtb \
- armada-388-db.dtb \
- armada-388-gp.dtb \
-+ armada-388-helios4.dtb \
- armada-388-rd.dtb
- dtb-$(CONFIG_MACH_ARMADA_39X) += \
- armada-398-db.dtb
-diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts
-new file mode 100644
-index 000000000000..705adfa8c680
---- /dev/null
-+++ b/arch/arm/boot/dts/armada-388-helios4.dts
-@@ -0,0 +1,313 @@
-+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-+/*
-+ * Device Tree file for Helios4
-+ * based on SolidRun Clearfog revision A1 rev 2.0 (88F6828)
-+ *
-+ * Copyright (C) 2017 Aditya Prayoga <aditya@kobol.io>
-+ *
-+ */
-+
-+/dts-v1/;
-+#include "armada-388.dtsi"
-+#include "armada-38x-solidrun-microsom.dtsi"
-+
-+/ {
-+ model = "Helios4";
-+ compatible = "kobol,helios4", "marvell,armada388",
-+ "marvell,armada385", "marvell,armada380";
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x80000000>; /* 2 GB */
-+ };
-+
-+ aliases {
-+ /* So that mvebu u-boot can update the MAC addresses */
-+ ethernet1 = &eth0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ reg_12v: regulator-12v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "power_brick_12V";
-+ regulator-min-microvolt = <12000000>;
-+ regulator-max-microvolt = <12000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: regulator-3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ vin-supply = <&reg_12v>;
-+ };
-+
-+ reg_5p0v_hdd: regulator-5v-hdd {
-+ compatible = "regulator-fixed";
-+ regulator-name = "5V_HDD";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ vin-supply = <&reg_12v>;
-+ };
-+
-+ reg_5p0v_usb: regulator-5v-usb {
-+ compatible = "regulator-fixed";
-+ regulator-name = "USB-PWR";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ enable-active-high;
-+ gpio = <&expander0 6 GPIO_ACTIVE_HIGH>;
-+ vin-supply = <&reg_12v>;
-+ };
-+
-+ system-leds {
-+ compatible = "gpio-leds";
-+ status-led {
-+ label = "helios4:green:status";
-+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "heartbeat";
-+ default-state = "on";
-+ };
-+
-+ fault-led {
-+ label = "helios4:red:fault";
-+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-+ default-state = "keep";
-+ };
-+ };
-+
-+ io-leds {
-+ compatible = "gpio-leds";
-+ sata1-led {
-+ label = "helios4:green:ata1";
-+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "ata1";
-+ default-state = "off";
-+ };
-+ sata2-led {
-+ label = "helios4:green:ata2";
-+ gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "ata2";
-+ default-state = "off";
-+ };
-+ sata3-led {
-+ label = "helios4:green:ata3";
-+ gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "ata3";
-+ default-state = "off";
-+ };
-+ sata4-led {
-+ label = "helios4:green:ata4";
-+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "ata4";
-+ default-state = "off";
-+ };
-+ usb-led {
-+ label = "helios4:green:usb";
-+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "usb-host";
-+ default-state = "off";
-+ };
-+ };
-+
-+ fan1: j10-pwm {
-+ compatible = "pwm-fan";
-+ pwms = <&gpio1 9 40000>; /* Target freq:25 kHz */
-+ };
-+
-+ fan2: j17-pwm {
-+ compatible = "pwm-fan";
-+ pwms = <&gpio1 23 40000>; /* Target freq:25 kHz */
-+ };
-+
-+ usb2_phy: usb2-phy {
-+ compatible = "usb-nop-xceiv";
-+ vbus-regulator = <&reg_5p0v_usb>;
-+ };
-+
-+ usb3_phy: usb3-phy {
-+ compatible = "usb-nop-xceiv";
-+ };
-+
-+ soc {
-+ internal-regs {
-+ i2c@11000 {
-+ clock-frequency = <400000>;
-+ pinctrl-0 = <&i2c0_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ /*
-+ * PCA9655 GPIO expander, up to 1MHz clock.
-+ * 0-Board Revision bit 0 #
-+ * 1-Board Revision bit 1 #
-+ * 5-USB3 overcurrent
-+ * 6-USB3 power
-+ */
-+ expander0: gpio-expander@20 {
-+ /*
-+ * This is how it should be:
-+ * compatible = "onnn,pca9655",
-+ * "nxp,pca9555";
-+ * but you can't do this because of
-+ * the way I2C works.
-+ */
-+ compatible = "nxp,pca9555";
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ reg = <0x20>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pca0_pins>;
-+ interrupt-parent = <&gpio0>;
-+ interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+
-+ board_rev_bit_0 {
-+ gpio-hog;
-+ gpios = <0 GPIO_ACTIVE_LOW>;
-+ input;
-+ line-name = "board-rev-0";
-+ };
-+ board_rev_bit_1 {
-+ gpio-hog;
-+ gpios = <1 GPIO_ACTIVE_LOW>;
-+ input;
-+ line-name = "board-rev-1";
-+ };
-+ usb3_ilimit {
-+ gpio-hog;
-+ gpios = <5 GPIO_ACTIVE_HIGH>;
-+ input;
-+ line-name = "usb-overcurrent-status";
-+ };
-+ };
-+
-+ temp_sensor: temp@4c {
-+ compatible = "ti,lm75";
-+ reg = <0x4c>;
-+ vcc-supply = <&reg_3p3v>;
-+ };
-+ };
-+
-+ i2c@11100 {
-+ /*
-+ * External I2C Bus for user peripheral
-+ */
-+ clock-frequency = <400000>;
-+ pinctrl-0 = <&helios_i2c1_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+ };
-+
-+ sata@a8000 {
-+ status = "okay";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sata0: sata-port@0 {
-+ reg = <0>;
-+ };
-+
-+ sata1: sata-port@1 {
-+ reg = <1>;
-+ };
-+ };
-+
-+ sata@e0000 {
-+ status = "okay";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ sata2: sata-port@0 {
-+ reg = <0>;
-+ };
-+
-+ sata3: sata-port@1 {
-+ reg = <1>;
-+ };
-+ };
-+
-+ spi@10680 {
-+ pinctrl-0 = <&spi1_pins
-+ &microsom_spi1_cs_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+ };
-+
-+ sdhci@d8000 {
-+ bus-width = <4>;
-+ cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-+ no-1-8-v;
-+ pinctrl-0 = <&helios_sdhci_pins
-+ &helios_sdhci_cd_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+ vmmc = <&reg_3p3v>;
-+ wp-inverted;
-+ };
-+
-+ usb@58000 {
-+ usb-phy = <&usb2_phy>;
-+ status = "okay";
-+ };
-+
-+ usb3@f0000 {
-+ status = "okay";
-+ };
-+
-+ usb3@f8000 {
-+ status = "okay";
-+ };
-+
-+ pinctrl@18000 {
-+ pca0_pins: pca0-pins {
-+ marvell,pins = "mpp23";
-+ marvell,function = "gpio";
-+ };
-+ microsom_phy0_int_pins: microsom-phy0-int-pins {
-+ marvell,pins = "mpp18";
-+ marvell,function = "gpio";
-+ };
-+ helios_i2c1_pins: i2c1-pins {
-+ marvell,pins = "mpp26", "mpp27";
-+ marvell,function = "i2c1";
-+ };
-+ helios_sdhci_cd_pins: helios-sdhci-cd-pins {
-+ marvell,pins = "mpp20";
-+ marvell,function = "gpio";
-+ };
-+ helios_sdhci_pins: helios-sdhci-pins {
-+ marvell,pins = "mpp21", "mpp28",
-+ "mpp37", "mpp38",
-+ "mpp39", "mpp40";
-+ marvell,function = "sd0";
-+ };
-+ helios_led_pins: helios-led-pins {
-+ marvell,pins = "mpp24", "mpp25",
-+ "mpp49", "mpp50",
-+ "mpp52", "mpp53",
-+ "mpp54";
-+ marvell,function = "gpio";
-+ };
-+ helios_fan_pins: helios-fan-pins {
-+ marvell,pins = "mpp41", "mpp43",
-+ "mpp48", "mpp55";
-+ marvell,function = "gpio";
-+ };
-+ microsom_spi1_cs_pins: spi1-cs-pins {
-+ marvell,pins = "mpp59";
-+ marvell,function = "spi1";
-+ };
-+ };
-+ };
-+ };
-+};
---
-cgit 1.2-0.3.lf.el7
diff --git a/bcm2835-hwmon-Add-support-for-RPi-voltage-sensor.patch b/bcm2835-hwmon-Add-support-for-RPi-voltage-sensor.patch
index 3e65ab969..7812084f1 100644
--- a/bcm2835-hwmon-Add-support-for-RPi-voltage-sensor.patch
+++ b/bcm2835-hwmon-Add-support-for-RPi-voltage-sensor.patch
@@ -1,376 +1,3 @@
-From be3035e3627d2570de4c2c612ecd095968986437 Mon Sep 17 00:00:00 2001
-From: Stefan Wahren <stefan.wahren@i2se.com>
-Date: Fri, 25 May 2018 21:24:34 +0200
-Subject: [PATCH 1/4] ARM: bcm2835: Add GET_THROTTLED firmware property
-
-Recent Raspberry Pi firmware provides a mailbox property to detect
-under-voltage conditions. Here is the current definition.
-
-The u32 value returned by the firmware is divided into 2 parts:
- - lower 16-bits are the live value
- - upper 16-bits are the history or sticky value
-
- Bits:
- 0: undervoltage
- 1: arm frequency capped
- 2: currently throttled
- 16: undervoltage has occurred
- 17: arm frequency capped has occurred
- 18: throttling has occurred
-
-Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
-Signed-off-by: Eric Anholt <eric@anholt.net>
-Reviewed-by: Eric Anholt <eric@anholt.net>
----
- include/soc/bcm2835/raspberrypi-firmware.h | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h
-index 8ee8991aa099a..c4a5c9e9fb478 100644
---- a/include/soc/bcm2835/raspberrypi-firmware.h
-+++ b/include/soc/bcm2835/raspberrypi-firmware.h
-@@ -75,6 +75,7 @@ enum rpi_firmware_property_tag {
- RPI_FIRMWARE_GET_EDID_BLOCK = 0x00030020,
- RPI_FIRMWARE_GET_CUSTOMER_OTP = 0x00030021,
- RPI_FIRMWARE_GET_DOMAIN_STATE = 0x00030030,
-+ RPI_FIRMWARE_GET_THROTTLED = 0x00030046,
- RPI_FIRMWARE_SET_CLOCK_STATE = 0x00038001,
- RPI_FIRMWARE_SET_CLOCK_RATE = 0x00038002,
- RPI_FIRMWARE_SET_VOLTAGE = 0x00038003,
---
-2.17.1
-
-From 3c493c885cf8abf0986c9877875161dfd0a29273 Mon Sep 17 00:00:00 2001
-From: Stefan Wahren <stefan.wahren@i2se.com>
-Date: Fri, 25 May 2018 21:24:35 +0200
-Subject: [PATCH 2/4] hwmon: Add support for RPi voltage sensor
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Currently there is no easy way to detect undervoltage conditions on a
-remote Raspberry Pi. This hwmon driver retrieves the state of the
-undervoltage sensor via mailbox interface. The handling based on
-Noralf's modifications to the downstream firmware driver. In case of
-an undervoltage condition only an entry is written to the kernel log.
-
-CC: "Noralf Trønnes" <noralf@tronnes.org>
-Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
-Signed-off-by: Eric Anholt <eric@anholt.net>
-Acked-by: Guenter Roeck <linux@roeck-us.net>
----
- Documentation/hwmon/raspberrypi-hwmon | 22 ++++
- drivers/hwmon/Kconfig | 10 ++
- drivers/hwmon/Makefile | 1 +
- drivers/hwmon/raspberrypi-hwmon.c | 166 ++++++++++++++++++++++++++
- 4 files changed, 199 insertions(+)
- create mode 100644 Documentation/hwmon/raspberrypi-hwmon
- create mode 100644 drivers/hwmon/raspberrypi-hwmon.c
-
-diff --git a/Documentation/hwmon/raspberrypi-hwmon b/Documentation/hwmon/raspberrypi-hwmon
-new file mode 100644
-index 0000000000000..3c92e2cb52d60
---- /dev/null
-+++ b/Documentation/hwmon/raspberrypi-hwmon
-@@ -0,0 +1,22 @@
-+Kernel driver raspberrypi-hwmon
-+===============================
-+
-+Supported boards:
-+ * Raspberry Pi A+ (via GPIO on SoC)
-+ * Raspberry Pi B+ (via GPIO on SoC)
-+ * Raspberry Pi 2 B (via GPIO on SoC)
-+ * Raspberry Pi 3 B (via GPIO on port expander)
-+ * Raspberry Pi 3 B+ (via PMIC)
-+
-+Author: Stefan Wahren <stefan.wahren@i2se.com>
-+
-+Description
-+-----------
-+
-+This driver periodically polls a mailbox property of the VC4 firmware to detect
-+undervoltage conditions.
-+
-+Sysfs entries
-+-------------
-+
-+in0_lcrit_alarm Undervoltage alarm
-diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
-index f10840ad465c2..fdaab8229686f 100644
---- a/drivers/hwmon/Kconfig
-+++ b/drivers/hwmon/Kconfig
-@@ -1298,6 +1298,16 @@ config SENSORS_PWM_FAN
- This driver can also be built as a module. If so, the module
- will be called pwm-fan.
-
-+config SENSORS_RASPBERRYPI_HWMON
-+ tristate "Raspberry Pi voltage monitor"
-+ depends on RASPBERRYPI_FIRMWARE || COMPILE_TEST
-+ help
-+ If you say yes here you get support for voltage sensor on the
-+ Raspberry Pi.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called raspberrypi-hwmon.
-+
- config SENSORS_SHT15
- tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
- depends on GPIOLIB || COMPILE_TEST
-diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
-index e7d52a36e6c4f..a9297703fd6e4 100644
---- a/drivers/hwmon/Makefile
-+++ b/drivers/hwmon/Makefile
-@@ -141,6 +141,7 @@ obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
- obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
- obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o
- obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o
-+obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o
- obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o
- obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
- obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o
-diff --git a/drivers/hwmon/raspberrypi-hwmon.c b/drivers/hwmon/raspberrypi-hwmon.c
-new file mode 100644
-index 0000000000000..fb4e4a6bb1f63
---- /dev/null
-+++ b/drivers/hwmon/raspberrypi-hwmon.c
-@@ -0,0 +1,166 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Raspberry Pi voltage sensor driver
-+ *
-+ * Based on firmware/raspberrypi.c by Noralf Trønnes
-+ *
-+ * Copyright (C) 2018 Stefan Wahren <stefan.wahren@i2se.com>
-+ */
-+#include <linux/device.h>
-+#include <linux/err.h>
-+#include <linux/hwmon.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/workqueue.h>
-+#include <soc/bcm2835/raspberrypi-firmware.h>
-+
-+#define UNDERVOLTAGE_STICKY_BIT BIT(16)
-+
-+struct rpi_hwmon_data {
-+ struct device *hwmon_dev;
-+ struct rpi_firmware *fw;
-+ u32 last_throttled;
-+ struct delayed_work get_values_poll_work;
-+};
-+
-+static void rpi_firmware_get_throttled(struct rpi_hwmon_data *data)
-+{
-+ u32 new_uv, old_uv, value;
-+ int ret;
-+
-+ /* Request firmware to clear sticky bits */
-+ value = 0xffff;
-+
-+ ret = rpi_firmware_property(data->fw, RPI_FIRMWARE_GET_THROTTLED,
-+ &value, sizeof(value));
-+ if (ret) {
-+ dev_err_once(data->hwmon_dev, "Failed to get throttled (%d)\n",
-+ ret);
-+ return;
-+ }
-+
-+ new_uv = value & UNDERVOLTAGE_STICKY_BIT;
-+ old_uv = data->last_throttled & UNDERVOLTAGE_STICKY_BIT;
-+ data->last_throttled = value;
-+
-+ if (new_uv == old_uv)
-+ return;
-+
-+ if (new_uv)
-+ dev_crit(data->hwmon_dev, "Undervoltage detected!\n");
-+ else
-+ dev_info(data->hwmon_dev, "Voltage normalised\n");
-+
-+ sysfs_notify(&data->hwmon_dev->kobj, NULL, "in0_lcrit_alarm");
-+}
-+
-+static void get_values_poll(struct work_struct *work)
-+{
-+ struct rpi_hwmon_data *data;
-+
-+ data = container_of(work, struct rpi_hwmon_data,
-+ get_values_poll_work.work);
-+
-+ rpi_firmware_get_throttled(data);
-+
-+ /*
-+ * We can't run faster than the sticky shift (100ms) since we get
-+ * flipping in the sticky bits that are cleared.
-+ */
-+ schedule_delayed_work(&data->get_values_poll_work, 2 * HZ);
-+}
-+
-+static int rpi_read(struct device *dev, enum hwmon_sensor_types type,
-+ u32 attr, int channel, long *val)
-+{
-+ struct rpi_hwmon_data *data = dev_get_drvdata(dev);
-+
-+ *val = !!(data->last_throttled & UNDERVOLTAGE_STICKY_BIT);
-+ return 0;
-+}
-+
-+static umode_t rpi_is_visible(const void *_data, enum hwmon_sensor_types type,
-+ u32 attr, int channel)
-+{
-+ return 0444;
-+}
-+
-+static const u32 rpi_in_config[] = {
-+ HWMON_I_LCRIT_ALARM,
-+ 0
-+};
-+
-+static const struct hwmon_channel_info rpi_in = {
-+ .type = hwmon_in,
-+ .config = rpi_in_config,
-+};
-+
-+static const struct hwmon_channel_info *rpi_info[] = {
-+ &rpi_in,
-+ NULL
-+};
-+
-+static const struct hwmon_ops rpi_hwmon_ops = {
-+ .is_visible = rpi_is_visible,
-+ .read = rpi_read,
-+};
-+
-+static const struct hwmon_chip_info rpi_chip_info = {
-+ .ops = &rpi_hwmon_ops,
-+ .info = rpi_info,
-+};
-+
-+static int rpi_hwmon_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct rpi_hwmon_data *data;
-+ int ret;
-+
-+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
-+ if (!data)
-+ return -ENOMEM;
-+
-+ /* Parent driver assure that firmware is correct */
-+ data->fw = dev_get_drvdata(dev->parent);
-+
-+ /* Init throttled */
-+ ret = rpi_firmware_property(data->fw, RPI_FIRMWARE_GET_THROTTLED,
-+ &data->last_throttled,
-+ sizeof(data->last_throttled));
-+
-+ data->hwmon_dev = devm_hwmon_device_register_with_info(dev, "rpi_volt",
-+ data,
-+ &rpi_chip_info,
-+ NULL);
-+
-+ INIT_DELAYED_WORK(&data->get_values_poll_work, get_values_poll);
-+ platform_set_drvdata(pdev, data);
-+
-+ if (!PTR_ERR_OR_ZERO(data->hwmon_dev))
-+ schedule_delayed_work(&data->get_values_poll_work, 2 * HZ);
-+
-+ return PTR_ERR_OR_ZERO(data->hwmon_dev);
-+}
-+
-+static int rpi_hwmon_remove(struct platform_device *pdev)
-+{
-+ struct rpi_hwmon_data *data = platform_get_drvdata(pdev);
-+
-+ cancel_delayed_work_sync(&data->get_values_poll_work);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver rpi_hwmon_driver = {
-+ .probe = rpi_hwmon_probe,
-+ .remove = rpi_hwmon_remove,
-+ .driver = {
-+ .name = "raspberrypi-hwmon",
-+ },
-+};
-+module_platform_driver(rpi_hwmon_driver);
-+
-+MODULE_AUTHOR("Stefan Wahren <stefan.wahren@i2se.com>");
-+MODULE_DESCRIPTION("Raspberry Pi voltage sensor driver");
-+MODULE_LICENSE("GPL v2");
---
-2.17.1
-
-From 4ebe8673279b7afbbcbcf92094c9012a3c91f240 Mon Sep 17 00:00:00 2001
-From: Stefan Wahren <stefan.wahren@i2se.com>
-Date: Fri, 25 May 2018 21:24:36 +0200
-Subject: [PATCH 3/4] firmware: raspberrypi: Register hwmon driver
-
-Since the raspberrypi-hwmon driver is tied to the VC4 firmware instead of
-particular hardware its registration should be in the firmware driver.
-
-Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
-Signed-off-by: Eric Anholt <eric@anholt.net>
----
- drivers/firmware/raspberrypi.c | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
-
-diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c
-index 6692888f04cfb..0602626bf72d0 100644
---- a/drivers/firmware/raspberrypi.c
-+++ b/drivers/firmware/raspberrypi.c
-@@ -21,6 +21,8 @@
- #define MBOX_DATA28(msg) ((msg) & ~0xf)
- #define MBOX_CHAN_PROPERTY 8
-
-+static struct platform_device *rpi_hwmon;
-+
- struct rpi_firmware {
- struct mbox_client cl;
- struct mbox_chan *chan; /* The property channel. */
-@@ -183,6 +185,20 @@ rpi_firmware_print_firmware_revision(struct rpi_firmware *fw)
- }
- }
-
-+static void
-+rpi_register_hwmon_driver(struct device *dev, struct rpi_firmware *fw)
-+{
-+ u32 packet;
-+ int ret = rpi_firmware_property(fw, RPI_FIRMWARE_GET_THROTTLED,
-+ &packet, sizeof(packet));
-+
-+ if (ret)
-+ return;
-+
-+ rpi_hwmon = platform_device_register_data(dev, "raspberrypi-hwmon",
-+ -1, NULL, 0);
-+}
-+
- static int rpi_firmware_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
-@@ -209,6 +225,7 @@ static int rpi_firmware_probe(struct platform_device *pdev)
- platform_set_drvdata(pdev, fw);
-
- rpi_firmware_print_firmware_revision(fw);
-+ rpi_register_hwmon_driver(dev, fw);
-
- return 0;
- }
-@@ -217,6 +234,8 @@ static int rpi_firmware_remove(struct platform_device *pdev)
- {
- struct rpi_firmware *fw = platform_get_drvdata(pdev);
-
-+ platform_device_unregister(rpi_hwmon);
-+ rpi_hwmon = NULL;
- mbox_free_channel(fw->chan);
-
- return 0;
---
-2.17.1
-
From a0cf7704b6bc145a9f198a9b2bcf92ccc5d6b6be Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Fri, 20 Jul 2018 12:58:37 +0100
diff --git a/bcm2837-enable-pmu.patch b/bcm2837-enable-pmu.patch
deleted file mode 100644
index 75efbe90c..000000000
--- a/bcm2837-enable-pmu.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 26611da3961755795d58595851eec350e75ae0e7 Mon Sep 17 00:00:00 2001
-From: Eric Anholt <eric@anholt.net>
-Date: Mon, 21 May 2018 11:39:07 -0700
-Subject: arm: bcm2835: Add the PMU to the devicetree.
-
-This only probes on arm64 so far, but hopefully that driver will be
-generalized soon.
-
-Signed-off-by: Eric Anholt <eric@anholt.net>
-Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
----
- arch/arm/boot/dts/bcm2837.dtsi | 6 ++++++
- 1 file changed, 6 insertions(+)
-
-diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
-index 7704bb0..beb6c50 100644
---- a/arch/arm/boot/dts/bcm2837.dtsi
-+++ b/arch/arm/boot/dts/bcm2837.dtsi
-@@ -17,6 +17,12 @@
- };
- };
-
-+ arm-pmu {
-+ compatible = "arm,cortex-a53-pmu";
-+ interrupt-parent = <&local_intc>;
-+ interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
- timer {
- compatible = "arm,armv7-timer";
- interrupt-parent = <&local_intc>;
---
-cgit v1.1
diff --git a/configs/fedora/generic/CONFIG_ARCH_K3 b/configs/fedora/generic/CONFIG_ARCH_K3
new file mode 100644
index 000000000..6929420f8
--- /dev/null
+++ b/configs/fedora/generic/CONFIG_ARCH_K3
@@ -0,0 +1 @@
+# CONFIG_ARCH_K3 is not set
diff --git a/configs/fedora/generic/CONFIG_RESET_QCOM_AOSS b/configs/fedora/generic/CONFIG_RESET_QCOM_AOSS
new file mode 100644
index 000000000..7213d3d92
--- /dev/null
+++ b/configs/fedora/generic/CONFIG_RESET_QCOM_AOSS
@@ -0,0 +1 @@
+# CONFIG_RESET_QCOM_AOSS is not set
diff --git a/configs/fedora/generic/CONFIG_SUN50I_DE2_BUS b/configs/fedora/generic/CONFIG_SUN50I_DE2_BUS
new file mode 100644
index 000000000..8af98239a
--- /dev/null
+++ b/configs/fedora/generic/CONFIG_SUN50I_DE2_BUS
@@ -0,0 +1 @@
+# CONFIG_SUN50I_DE2_BUS is not set
diff --git a/configs/fedora/generic/CONFIG_UBIFS_FS_XATTR b/configs/fedora/generic/CONFIG_UBIFS_FS_XATTR
new file mode 100644
index 000000000..b6b2394de
--- /dev/null
+++ b/configs/fedora/generic/CONFIG_UBIFS_FS_XATTR
@@ -0,0 +1 @@
+CONFIG_UBIFS_FS_XATTR=y
diff --git a/configs/fedora/generic/arm/aarch64/CONFIG_SUN50I_DE2_BUS b/configs/fedora/generic/arm/aarch64/CONFIG_SUN50I_DE2_BUS
new file mode 100644
index 000000000..38c61ab12
--- /dev/null
+++ b/configs/fedora/generic/arm/aarch64/CONFIG_SUN50I_DE2_BUS
@@ -0,0 +1 @@
+CONFIG_SUN50I_DE2_BUS=y
diff --git a/gitrev b/gitrev
index cf6b235cd..a6c1300b8 100644
--- a/gitrev
+++ b/gitrev
@@ -1 +1 @@
-815f0ddb346c196018d4d8f8f55c12b83da1de3f
+33e17876ea4edcd7f5c01efa78e8d02889261abf
diff --git a/kernel-aarch64-debug.config b/kernel-aarch64-debug.config
index 2b3032caf..348b9299e 100644
--- a/kernel-aarch64-debug.config
+++ b/kernel-aarch64-debug.config
@@ -235,6 +235,7 @@ CONFIG_ARCH_HISI=y
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_K3 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_LAYERSCAPE is not set
# CONFIG_ARCH_LG1K is not set
@@ -4837,6 +4838,7 @@ CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_GPIO=y
CONFIG_RESET_HISI=y
# CONFIG_RESET_HSDK_V1 is not set
+# CONFIG_RESET_QCOM_AOSS is not set
CONFIG_RESET_SIMPLE=y
# CONFIG_RESET_TI_SCI is not set
# CONFIG_RESET_TI_SYSCON is not set
@@ -6017,6 +6019,7 @@ CONFIG_ST_UVIS25_SPI=m
CONFIG_SUN4I_GPADC=m
CONFIG_SUN50I_A64_CCU=y
CONFIG_SUN50I_A64_UNSTABLE_TIMER=y
+CONFIG_SUN50I_DE2_BUS=y
CONFIG_SUN50I_H6_CCU=y
CONFIG_SUN50I_H6_R_CCU=y
# CONFIG_SUN8I_A83T_CCU is not set
@@ -6363,6 +6366,7 @@ CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_ENCRYPTION=y
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_SECURITY=y
+CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN is not set
# CONFIG_UBSAN_SANITIZE_ALL is not set
diff --git a/kernel-aarch64.config b/kernel-aarch64.config
index 28a402e64..369b1e463 100644
--- a/kernel-aarch64.config
+++ b/kernel-aarch64.config
@@ -235,6 +235,7 @@ CONFIG_ARCH_HISI=y
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_K3 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_LAYERSCAPE is not set
# CONFIG_ARCH_LG1K is not set
@@ -4814,6 +4815,7 @@ CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_GPIO=y
CONFIG_RESET_HISI=y
# CONFIG_RESET_HSDK_V1 is not set
+# CONFIG_RESET_QCOM_AOSS is not set
CONFIG_RESET_SIMPLE=y
# CONFIG_RESET_TI_SCI is not set
# CONFIG_RESET_TI_SYSCON is not set
@@ -5993,6 +5995,7 @@ CONFIG_ST_UVIS25_SPI=m
CONFIG_SUN4I_GPADC=m
CONFIG_SUN50I_A64_CCU=y
CONFIG_SUN50I_A64_UNSTABLE_TIMER=y
+CONFIG_SUN50I_DE2_BUS=y
CONFIG_SUN50I_H6_CCU=y
CONFIG_SUN50I_H6_R_CCU=y
# CONFIG_SUN8I_A83T_CCU is not set
@@ -6339,6 +6342,7 @@ CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_ENCRYPTION=y
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_SECURITY=y
+CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN is not set
# CONFIG_UBSAN_SANITIZE_ALL is not set
diff --git a/kernel-armv7hl-debug.config b/kernel-armv7hl-debug.config
index 06cef6109..3afb38e29 100644
--- a/kernel-armv7hl-debug.config
+++ b/kernel-armv7hl-debug.config
@@ -223,6 +223,7 @@ CONFIG_ARCH_HIGHBANK=y
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_K3 is not set
# CONFIG_ARCH_KEYSTONE is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_LPC32XX is not set
@@ -5134,6 +5135,7 @@ CONFIG_RENESAS_PHY=m
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_GPIO=y
# CONFIG_RESET_HSDK_V1 is not set
+# CONFIG_RESET_QCOM_AOSS is not set
CONFIG_RESET_SIMPLE=y
# CONFIG_RESET_TI_SCI is not set
# CONFIG_RESET_TI_SYSCON is not set
@@ -6448,6 +6450,7 @@ CONFIG_ST_UVIS25_SPI=m
CONFIG_SUN4I_A10_CCU=y
CONFIG_SUN4I_EMAC=m
CONFIG_SUN4I_GPADC=m
+# CONFIG_SUN50I_DE2_BUS is not set
CONFIG_SUN5I_CCU=y
CONFIG_SUN6I_A31_CCU=y
CONFIG_SUN8I_A23_CCU=y
@@ -6818,6 +6821,7 @@ CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_ENCRYPTION=y
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_SECURITY=y
+CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN is not set
# CONFIG_UBSAN_SANITIZE_ALL is not set
diff --git a/kernel-armv7hl-lpae-debug.config b/kernel-armv7hl-lpae-debug.config
index 0a3e05760..aa59328cf 100644
--- a/kernel-armv7hl-lpae-debug.config
+++ b/kernel-armv7hl-lpae-debug.config
@@ -218,6 +218,7 @@ CONFIG_ARCH_HIGHBANK=y
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_K3 is not set
CONFIG_ARCH_KEYSTONE=y
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_LPC32XX is not set
@@ -4842,6 +4843,7 @@ CONFIG_RENESAS_PHY=m
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_GPIO=y
# CONFIG_RESET_HSDK_V1 is not set
+# CONFIG_RESET_QCOM_AOSS is not set
CONFIG_RESET_SIMPLE=y
# CONFIG_RESET_TI_SCI is not set
# CONFIG_RESET_TI_SYSCON is not set
@@ -6047,6 +6049,7 @@ CONFIG_ST_UVIS25_SPI=m
CONFIG_SUN4I_A10_CCU=y
CONFIG_SUN4I_EMAC=m
CONFIG_SUN4I_GPADC=m
+# CONFIG_SUN50I_DE2_BUS is not set
CONFIG_SUN5I_CCU=y
CONFIG_SUN6I_A31_CCU=y
CONFIG_SUN8I_A23_CCU=y
@@ -6401,6 +6404,7 @@ CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_ENCRYPTION=y
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_SECURITY=y
+CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN is not set
# CONFIG_UBSAN_SANITIZE_ALL is not set
diff --git a/kernel-armv7hl-lpae.config b/kernel-armv7hl-lpae.config
index 0f0059ba1..8c84d19ee 100644
--- a/kernel-armv7hl-lpae.config
+++ b/kernel-armv7hl-lpae.config
@@ -218,6 +218,7 @@ CONFIG_ARCH_HIGHBANK=y
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_K3 is not set
CONFIG_ARCH_KEYSTONE=y
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_LPC32XX is not set
@@ -4819,6 +4820,7 @@ CONFIG_RENESAS_PHY=m
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_GPIO=y
# CONFIG_RESET_HSDK_V1 is not set
+# CONFIG_RESET_QCOM_AOSS is not set
CONFIG_RESET_SIMPLE=y
# CONFIG_RESET_TI_SCI is not set
# CONFIG_RESET_TI_SYSCON is not set
@@ -6023,6 +6025,7 @@ CONFIG_ST_UVIS25_SPI=m
CONFIG_SUN4I_A10_CCU=y
CONFIG_SUN4I_EMAC=m
CONFIG_SUN4I_GPADC=m
+# CONFIG_SUN50I_DE2_BUS is not set
CONFIG_SUN5I_CCU=y
CONFIG_SUN6I_A31_CCU=y
CONFIG_SUN8I_A23_CCU=y
@@ -6377,6 +6380,7 @@ CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_ENCRYPTION=y
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_SECURITY=y
+CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN is not set
# CONFIG_UBSAN_SANITIZE_ALL is not set
diff --git a/kernel-armv7hl.config b/kernel-armv7hl.config
index 85c0e8b85..d071a2d40 100644
--- a/kernel-armv7hl.config
+++ b/kernel-armv7hl.config
@@ -223,6 +223,7 @@ CONFIG_ARCH_HIGHBANK=y
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_K3 is not set
# CONFIG_ARCH_KEYSTONE is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_LPC32XX is not set
@@ -5111,6 +5112,7 @@ CONFIG_RENESAS_PHY=m
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_GPIO=y
# CONFIG_RESET_HSDK_V1 is not set
+# CONFIG_RESET_QCOM_AOSS is not set
CONFIG_RESET_SIMPLE=y
# CONFIG_RESET_TI_SCI is not set
# CONFIG_RESET_TI_SYSCON is not set
@@ -6424,6 +6426,7 @@ CONFIG_ST_UVIS25_SPI=m
CONFIG_SUN4I_A10_CCU=y
CONFIG_SUN4I_EMAC=m
CONFIG_SUN4I_GPADC=m
+# CONFIG_SUN50I_DE2_BUS is not set
CONFIG_SUN5I_CCU=y
CONFIG_SUN6I_A31_CCU=y
CONFIG_SUN8I_A23_CCU=y
@@ -6794,6 +6797,7 @@ CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_ENCRYPTION=y
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_SECURITY=y
+CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN is not set
# CONFIG_UBSAN_SANITIZE_ALL is not set
diff --git a/kernel-i686-PAE.config b/kernel-i686-PAE.config
index 5e2a0052c..90b5a56f8 100644
--- a/kernel-i686-PAE.config
+++ b/kernel-i686-PAE.config
@@ -241,6 +241,7 @@ CONFIG_AR5523=m
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_K3 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_LPC32XX is not set
CONFIG_ARCH_MULTIPLATFORM=y
@@ -4554,6 +4555,7 @@ CONFIG_REMOTEPROC=m
CONFIG_RENESAS_PHY=m
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_RESET_HSDK_V1 is not set
+# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_TI_SYSCON is not set
CONFIG_RETPOLINE=y
# CONFIG_RFD77402 is not set
@@ -5671,6 +5673,7 @@ CONFIG_STRIP_ASM_SYMS=y
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_SPI=m
+# CONFIG_SUN50I_DE2_BUS is not set
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_SUNGEM=m
@@ -5991,6 +5994,7 @@ CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_ENCRYPTION=y
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_SECURITY=y
+CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN is not set
# CONFIG_UBSAN_SANITIZE_ALL is not set
diff --git a/kernel-i686-PAEdebug.config b/kernel-i686-PAEdebug.config
index 3b6458d96..12fca1ddf 100644
--- a/kernel-i686-PAEdebug.config
+++ b/kernel-i686-PAEdebug.config
@@ -241,6 +241,7 @@ CONFIG_AR5523=m
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_K3 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_LPC32XX is not set
CONFIG_ARCH_MULTIPLATFORM=y
@@ -4578,6 +4579,7 @@ CONFIG_REMOTEPROC=m
CONFIG_RENESAS_PHY=m
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_RESET_HSDK_V1 is not set
+# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_TI_SYSCON is not set
CONFIG_RETPOLINE=y
# CONFIG_RFD77402 is not set
@@ -5696,6 +5698,7 @@ CONFIG_STRIP_ASM_SYMS=y
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_SPI=m
+# CONFIG_SUN50I_DE2_BUS is not set
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_SUNGEM=m
@@ -6016,6 +6019,7 @@ CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_ENCRYPTION=y
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_SECURITY=y
+CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN is not set
# CONFIG_UBSAN_SANITIZE_ALL is not set
diff --git a/kernel-i686-debug.config b/kernel-i686-debug.config
index 2072bccd7..be232d635 100644
--- a/kernel-i686-debug.config
+++ b/kernel-i686-debug.config
@@ -241,6 +241,7 @@ CONFIG_AR5523=m
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_K3 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_LPC32XX is not set
CONFIG_ARCH_MULTIPLATFORM=y
@@ -4578,6 +4579,7 @@ CONFIG_REMOTEPROC=m
CONFIG_RENESAS_PHY=m
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_RESET_HSDK_V1 is not set
+# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_TI_SYSCON is not set
CONFIG_RETPOLINE=y
# CONFIG_RFD77402 is not set
@@ -5696,6 +5698,7 @@ CONFIG_STRIP_ASM_SYMS=y
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_SPI=m
+# CONFIG_SUN50I_DE2_BUS is not set
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_SUNGEM=m
@@ -6016,6 +6019,7 @@ CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_ENCRYPTION=y
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_SECURITY=y
+CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN is not set
# CONFIG_UBSAN_SANITIZE_ALL is not set
diff --git a/kernel-i686.config b/kernel-i686.config
index 7824ff3e9..f978f2e20 100644
--- a/kernel-i686.config
+++ b/kernel-i686.config
@@ -241,6 +241,7 @@ CONFIG_AR5523=m
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_K3 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_LPC32XX is not set
CONFIG_ARCH_MULTIPLATFORM=y
@@ -4554,6 +4555,7 @@ CONFIG_REMOTEPROC=m
CONFIG_RENESAS_PHY=m
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_RESET_HSDK_V1 is not set
+# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_TI_SYSCON is not set
CONFIG_RETPOLINE=y
# CONFIG_RFD77402 is not set
@@ -5671,6 +5673,7 @@ CONFIG_STRIP_ASM_SYMS=y
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_SPI=m
+# CONFIG_SUN50I_DE2_BUS is not set
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_SUNGEM=m
@@ -5991,6 +5994,7 @@ CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_ENCRYPTION=y
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_SECURITY=y
+CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN is not set
# CONFIG_UBSAN_SANITIZE_ALL is not set
diff --git a/kernel-ppc64le-debug.config b/kernel-ppc64le-debug.config
index e27ca4bc7..01e4f33a9 100644
--- a/kernel-ppc64le-debug.config
+++ b/kernel-ppc64le-debug.config
@@ -185,6 +185,7 @@ CONFIG_AR5523=m
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_K3 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_LPC32XX is not set
CONFIG_ARCH_MULTIPLATFORM=y
@@ -4315,6 +4316,7 @@ CONFIG_REMOTEPROC=m
CONFIG_RENESAS_PHY=m
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_RESET_HSDK_V1 is not set
+# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_TI_SYSCON is not set
# CONFIG_RFD77402 is not set
# CONFIG_RFD_FTL is not set
@@ -5382,6 +5384,7 @@ CONFIG_STRIP_ASM_SYMS=y
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_SPI=m
+# CONFIG_SUN50I_DE2_BUS is not set
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_SUNGEM=m
@@ -5689,6 +5692,7 @@ CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_ENCRYPTION=y
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_SECURITY=y
+CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN is not set
# CONFIG_UBSAN_SANITIZE_ALL is not set
diff --git a/kernel-ppc64le.config b/kernel-ppc64le.config
index 6a2992c7d..ebdee4d77 100644
--- a/kernel-ppc64le.config
+++ b/kernel-ppc64le.config
@@ -185,6 +185,7 @@ CONFIG_AR5523=m
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_K3 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_LPC32XX is not set
CONFIG_ARCH_MULTIPLATFORM=y
@@ -4289,6 +4290,7 @@ CONFIG_REMOTEPROC=m
CONFIG_RENESAS_PHY=m
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_RESET_HSDK_V1 is not set
+# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_TI_SYSCON is not set
# CONFIG_RFD77402 is not set
# CONFIG_RFD_FTL is not set
@@ -5355,6 +5357,7 @@ CONFIG_STRIP_ASM_SYMS=y
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_SPI=m
+# CONFIG_SUN50I_DE2_BUS is not set
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_SUNGEM=m
@@ -5662,6 +5665,7 @@ CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_ENCRYPTION=y
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_SECURITY=y
+CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN is not set
# CONFIG_UBSAN_SANITIZE_ALL is not set
diff --git a/kernel-s390x-debug.config b/kernel-s390x-debug.config
index f9bc8faf3..3ab31f472 100644
--- a/kernel-s390x-debug.config
+++ b/kernel-s390x-debug.config
@@ -188,6 +188,7 @@ CONFIG_AR5523=m
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_K3 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_LPC32XX is not set
CONFIG_ARCH_MULTIPLATFORM=y
@@ -4207,6 +4208,7 @@ CONFIG_RENESAS_PHY=m
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_RESET_HSDK_V1 is not set
+# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_TI_SYSCON is not set
# CONFIG_RFD77402 is not set
# CONFIG_RFD_FTL is not set
@@ -5277,6 +5279,7 @@ CONFIG_STRIP_ASM_SYMS=y
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_SPI=m
+# CONFIG_SUN50I_DE2_BUS is not set
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_SUNGEM=m
@@ -5587,6 +5590,7 @@ CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_ENCRYPTION=y
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_SECURITY=y
+CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN is not set
# CONFIG_UBSAN_SANITIZE_ALL is not set
diff --git a/kernel-s390x.config b/kernel-s390x.config
index 28069aa72..c62637db7 100644
--- a/kernel-s390x.config
+++ b/kernel-s390x.config
@@ -188,6 +188,7 @@ CONFIG_AR5523=m
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_K3 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_LPC32XX is not set
CONFIG_ARCH_MULTIPLATFORM=y
@@ -4181,6 +4182,7 @@ CONFIG_RENESAS_PHY=m
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_RESET_HSDK_V1 is not set
+# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_TI_SYSCON is not set
# CONFIG_RFD77402 is not set
# CONFIG_RFD_FTL is not set
@@ -5250,6 +5252,7 @@ CONFIG_STRIP_ASM_SYMS=y
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_SPI=m
+# CONFIG_SUN50I_DE2_BUS is not set
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_SUNGEM=m
@@ -5560,6 +5563,7 @@ CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_ENCRYPTION=y
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_SECURITY=y
+CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN is not set
# CONFIG_UBSAN_SANITIZE_ALL is not set
diff --git a/kernel-x86_64-debug.config b/kernel-x86_64-debug.config
index 1ce52907b..cdf54a903 100644
--- a/kernel-x86_64-debug.config
+++ b/kernel-x86_64-debug.config
@@ -243,6 +243,7 @@ CONFIG_AR5523=m
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_K3 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_MEMORY_PROBE is not set
@@ -4620,6 +4621,7 @@ CONFIG_REMOTEPROC=m
CONFIG_RENESAS_PHY=m
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_RESET_HSDK_V1 is not set
+# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_TI_SYSCON is not set
CONFIG_RETPOLINE=y
# CONFIG_RFD77402 is not set
@@ -5746,6 +5748,7 @@ CONFIG_STRIP_ASM_SYMS=y
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_SPI=m
+# CONFIG_SUN50I_DE2_BUS is not set
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_SUNGEM=m
@@ -6066,6 +6069,7 @@ CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_ENCRYPTION=y
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_SECURITY=y
+CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN is not set
# CONFIG_UBSAN_SANITIZE_ALL is not set
diff --git a/kernel-x86_64.config b/kernel-x86_64.config
index 229191cc2..0fd72d081 100644
--- a/kernel-x86_64.config
+++ b/kernel-x86_64.config
@@ -243,6 +243,7 @@ CONFIG_AR5523=m
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_K3 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_MEMORY_PROBE is not set
@@ -4596,6 +4597,7 @@ CONFIG_REMOTEPROC=m
CONFIG_RENESAS_PHY=m
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_RESET_HSDK_V1 is not set
+# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_TI_SYSCON is not set
CONFIG_RETPOLINE=y
# CONFIG_RFD77402 is not set
@@ -5721,6 +5723,7 @@ CONFIG_STRIP_ASM_SYMS=y
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_SPI=m
+# CONFIG_SUN50I_DE2_BUS is not set
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_SUNGEM=m
@@ -6041,6 +6044,7 @@ CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_ENCRYPTION=y
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_SECURITY=y
+CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN is not set
# CONFIG_UBSAN_SANITIZE_ALL is not set
diff --git a/kernel.spec b/kernel.spec
index 558b09195..297b5bb4a 100644
--- a/kernel.spec
+++ b/kernel.spec
@@ -69,7 +69,7 @@ Summary: The Linux kernel
# The rc snapshot level
%global rcrev 0
# The git snapshot level
-%define gitrev 10
+%define gitrev 11
# Set rpm version accordingly
%define rpmversion 4.%{upstream_sublevel}.0
%endif
@@ -579,14 +579,9 @@ Patch305: qcom-msm89xx-fixes.patch
# https://patchwork.kernel.org/project/linux-mmc/list/?submitter=71861
Patch306: arm-sdhci-esdhc-imx-fixes.patch
-Patch310: arm-dts-armada388-helios4.patch
-
# https://www.spinics.net/lists/arm-kernel/msg670137.html
Patch311: arm64-ZynqMP-firmware-clock-drivers-core.patch
-# Enabling Patches for the RPi3+
-Patch330: bcm2837-enable-pmu.patch
-
Patch331: bcm2835-cpufreq-add-CPU-frequency-control-driver.patch
Patch332: bcm2835-hwmon-Add-support-for-RPi-voltage-sensor.patch
@@ -609,14 +604,6 @@ Patch501: Fix-for-module-sig-verification.patch
# rhbz 1431375
Patch502: input-rmi4-remove-the-need-for-artifical-IRQ.patch
-# For quiet / flickerfree boot, all queued for merging into 4.19-rc1
-Patch525: 0005-efi-bgrt-Drop-__initdata-from-bgrt_image_size.patch
-Patch526: 0006-efifb-Copy-the-ACPI-BGRT-boot-graphics-to-the-frameb.patch
-Patch527: 0007-efifb-BGRT-Do-not-copy-the-boot-graphics-for-non-nat.patch
-# Deferred fbcon takeover bugfix, pending upstream
-Patch529: 0009-fbcon-Only-defer-console-takeover-if-the-current-con.patch
-Patch530: 0010-fbcon-Do-not-takeover-the-console-from-atomic-contex.patch
-
# END OF PATCH DEFINITIONS
%endif
@@ -1876,6 +1863,9 @@ fi
#
#
%changelog
+* Fri Aug 24 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc0.git11.1
+- Linux v4.18-12721-g33e17876ea4e
+
* Thu Aug 23 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc0.git10.1
- Linux v4.18-11682-g815f0ddb346c
diff --git a/sources b/sources
index 83776bc31..5ad0b7a5a 100644
--- a/sources
+++ b/sources
@@ -1,2 +1,2 @@
SHA512 (linux-4.18.tar.xz) = 950eb85ac743b291afe9f21cd174d823e25f11883ee62cecfbfff8fe8c5672aae707654b1b8f29a133b1f2e3529e63b9f7fba4c45d6dacccc8000b3a9a9ae038
-SHA512 (patch-4.18-git10.xz) = 19ee46d7e33ba5cb331950a5900fae2a016e4c820085a32d5692ad02465dfb63e9ece769753c7a10d0deff6598ea8ff28f3301caf478b39eef464f7f6c917b46
+SHA512 (patch-4.18-git11.xz) = 37a693cb76d24243d21edf7ba08142eeae92704566049f85cd87369588cef64d69db39f813ee96a196a6367d34163a7c1f587778175dce10070af9ddced0d488