Merge remote-tracking branch 'origin/master'kernel-4.10.0-0.rc4.git4.1.vanilla.knurd.1.fc26kernel-4.10.0-0.rc4.git4.1.vanilla.knurd.1.fc25kernel-4.10.0-0.rc4.git4.1.vanilla.knurd.1.fc24

5 files changed, 805 insertions, 3 deletions

diff --git a/arm-imx6-hummingboard2.patch b/arm-imx6-hummingboard2.patch
new file mode 100644
index 000000000..bcf2961dc
--- /dev/null
+++ b/arm-imx6-hummingboard2.patch
@@ -0,0 +1,733 @@
+From e2b55af60f9f498b95ffb458955f4ff787bd55a1 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <pbrobinson@gmail.com>
+Date: Fri, 20 Jan 2017 08:32:55 +0000
+Subject: [PATCH] Add support for Hummingobard2 (Edge/Gate)
+
+http://www.spinics.net/lists/arm-kernel/msg552554.html
+
+Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
+---
+ arch/arm/boot/dts/Makefile                   |   2 +
+ arch/arm/boot/dts/imx6dl-hummingboard2.dts   |  52 +++
+ arch/arm/boot/dts/imx6q-hummingboard2.dts    |  60 +++
+ arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi | 562 +++++++++++++++++++++++++++
+ 4 files changed, 676 insertions(+)
+ create mode 100644 arch/arm/boot/dts/imx6dl-hummingboard2.dts
+ create mode 100644 arch/arm/boot/dts/imx6q-hummingboard2.dts
+ create mode 100644 arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 7327250..09227cc 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -348,6 +348,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
+ 	imx6dl-gw552x.dtb \
+ 	imx6dl-gw553x.dtb \
+ 	imx6dl-hummingboard.dtb \
++	imx6dl-hummingboard2.dtb \
+ 	imx6dl-icore.dtb \
+ 	imx6dl-nit6xlite.dtb \
+ 	imx6dl-nitrogen6x.dtb \
+@@ -390,6 +391,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
+ 	imx6q-gw553x.dtb \
+ 	imx6q-h100.dtb \
+ 	imx6q-hummingboard.dtb \
++	imx6q-hummingboard2.dtb \
+ 	imx6q-icore.dtb \
+ 	imx6q-icore-rqs.dtb \
+ 	imx6q-marsboard.dtb \
+diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2.dts b/arch/arm/boot/dts/imx6dl-hummingboard2.dts
+new file mode 100644
+index 0000000..990b505
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6dl-hummingboard2.dts
+@@ -0,0 +1,52 @@
++/*
++ * Device Tree file for SolidRun HummingBoard2
++ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
++ * Based on work by Russell King
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ *  a) This file is free software; you can redistribute it and/or
++ *     modify it under the terms of the GNU General Public License as
++ *     published by the Free Software Foundation; either version 2 of the
++ *     License.
++ *
++ *     This file is distributed in the hope that it will be useful
++ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *     GNU General Public License for more details.
++ *
++ * Or, alternatively
++ *
++ *  b) Permission is hereby granted, free of charge, to any person
++ *     obtaining a copy of this software and associated documentation
++ *     files (the "Software"), to deal in the Software without
++ *     restriction, including without limitation the rights to use
++ *     copy, modify, merge, publish, distribute, sublicense, and/or
++ *     sell copies of the Software, and to permit persons to whom the
++ *     Software is furnished to do so, subject to the following
++ *     conditions:
++ *
++ *     The above copyright notice and this permission notice shall be
++ *     included in all copies or substantial portions of the Software.
++ *
++ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
++ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
++ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ *     OTHER DEALINGS IN THE SOFTWARE.
++ */
++/dts-v1/;
++
++#include "imx6dl.dtsi"
++#include "imx6qdl-hummingboard2.dtsi"
++
++/ {
++	model = "SolidRun HummingBoard2 Solo/DualLite";
++	compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl";
++};
+diff --git a/arch/arm/boot/dts/imx6q-hummingboard2.dts b/arch/arm/boot/dts/imx6q-hummingboard2.dts
+new file mode 100644
+index 0000000..f5eec91
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6q-hummingboard2.dts
+@@ -0,0 +1,60 @@
++/*
++ * Device Tree file for SolidRun HummingBoard2
++ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
++ * Based on work by Russell King
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ *  a) This file is free software; you can redistribute it and/or
++ *     modify it under the terms of the GNU General Public License as
++ *     published by the Free Software Foundation; either version 2 of the
++ *     License.
++ *
++ *     This file is distributed in the hope that it will be useful
++ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *     GNU General Public License for more details.
++ *
++ * Or, alternatively
++ *
++ *  b) Permission is hereby granted, free of charge, to any person
++ *     obtaining a copy of this software and associated documentation
++ *     files (the "Software"), to deal in the Software without
++ *     restriction, including without limitation the rights to use
++ *     copy, modify, merge, publish, distribute, sublicense, and/or
++ *     sell copies of the Software, and to permit persons to whom the
++ *     Software is furnished to do so, subject to the following
++ *     conditions:
++ *
++ *     The above copyright notice and this permission notice shall be
++ *     included in all copies or substantial portions of the Software.
++ *
++ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
++ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
++ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ *     OTHER DEALINGS IN THE SOFTWARE.
++ */
++/dts-v1/;
++
++#include "imx6q.dtsi"
++#include "imx6qdl-hummingboard2.dtsi"
++
++/ {
++	model = "SolidRun HummingBoard2 Dual/Quad";
++	compatible = "solidrun,hummingboard2/q", "fsl,imx6q";
++};
++
++&sata {
++	status = "okay";
++	fsl,transmit-level-mV = <1104>;
++	fsl,transmit-boost-mdB = <0>;
++	fsl,transmit-atten-16ths = <9>;
++	fsl,no-spread-spectrum;
++};
+diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
+new file mode 100644
+index 0000000..66098a5
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
+@@ -0,0 +1,562 @@
++/*
++ * Device Tree file for SolidRun HummingBoard2
++ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ *  a) This file is free software; you can redistribute it and/or
++ *     modify it under the terms of the GNU General Public License as
++ *     published by the Free Software Foundation; either version 2 of the
++ *     License.
++ *
++ *     This file is distributed in the hope that it will be useful
++ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *     GNU General Public License for more details.
++ *
++ * Or, alternatively
++ *
++ *  b) Permission is hereby granted, free of charge, to any person
++ *     obtaining a copy of this software and associated documentation
++ *     files (the "Software"), to deal in the Software without
++ *     restriction, including without limitation the rights to use
++ *     copy, modify, merge, publish, distribute, sublicense, and/or
++ *     sell copies of the Software, and to permit persons to whom the
++ *     Software is furnished to do so, subject to the following
++ *     conditions:
++ *
++ *     The above copyright notice and this permission notice shall be
++ *     included in all copies or substantial portions of the Software.
++ *
++ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
++ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
++ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ *     OTHER DEALINGS IN THE SOFTWARE.
++ */
++#include "imx6qdl-microsom.dtsi"
++#include "imx6qdl-microsom-ar8035.dtsi"
++
++/ {
++	chosen {
++		stdout-path = &uart1;
++	};
++
++	ir_recv: ir-receiver {
++		compatible = "gpio-ir-receiver";
++		gpios = <&gpio7 9 GPIO_ACTIVE_LOW>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&pinctrl_hummingboard2_gpio7_9>;
++		linux,rc-map-name = "rc-rc6-mce";
++	};
++
++	regulators {
++		compatible = "simple-bus";
++
++		reg_3p3v: 3p3v {
++			compatible = "regulator-fixed";
++			regulator-name = "3P3V";
++			regulator-min-microvolt = <3300000>;
++			regulator-max-microvolt = <3300000>;
++			regulator-always-on;
++		};
++
++		reg_1p8v: 1p8v {
++			compatible = "regulator-fixed";
++			regulator-name = "1P8V";
++			regulator-min-microvolt = <1800000>;
++			regulator-max-microvolt = <1800000>;
++			regulator-always-on;
++		};
++
++		reg_usdhc2_vmmc: reg-usdhc2-vmmc {
++			compatible = "regulator-fixed";
++			gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
++			pinctrl-names = "default";
++			pinctrl-0 = <&pinctrl_hummingboard2_vmmc>;
++			regulator-boot-on;
++			regulator-max-microvolt = <3300000>;
++			regulator-min-microvolt = <3300000>;
++			regulator-name = "usdhc2_vmmc";
++			startup-delay-us = <1000>;
++		};
++
++		reg_usbh1_vbus: usb-h1-vbus {
++			compatible = "regulator-fixed";
++			enable-active-high;
++			gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
++			pinctrl-names = "default";
++			pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>;
++			regulator-name = "usb_h1_vbus";
++			regulator-min-microvolt = <5000000>;
++			regulator-max-microvolt = <5000000>;
++		};
++
++		reg_usbotg_vbus: usb-otg-vbus {
++			compatible = "regulator-fixed";
++			enable-active-high;
++			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
++			pinctrl-names = "default";
++			pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>;
++			regulator-name = "usb_otg_vbus";
++			regulator-min-microvolt = <5000000>;
++			regulator-max-microvolt = <5000000>;
++		};
++
++		reg_usbh2_vbus: usb-h2-vbus {
++			compatible = "regulator-gpio";
++			enable-active-high;
++			enable-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
++			pinctrl-names = "default";
++			pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>;
++			regulator-name = "usb_h2_vbus";
++			regulator-min-microvolt = <5000000>;
++			regulator-max-microvolt = <5000000>;
++			regulator-boot-on;
++		};
++
++		reg_usbh3_vbus: usb-h3-vbus {
++			compatible = "regulator-gpio";
++			enable-active-high;
++			enable-gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
++			pinctrl-names = "default";
++			pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>;
++			regulator-name = "usb_h3_vbus";
++			regulator-min-microvolt = <5000000>;
++			regulator-max-microvolt = <5000000>;
++			regulator-boot-on;
++		};
++	};
++
++	sound-sgtl5000 {
++		audio-codec = <&sgtl5000>;
++		audio-routing =
++			"MIC_IN", "Mic Jack",
++			"Mic Jack", "Mic Bias",
++			"Headphone Jack", "HP_OUT";
++		compatible = "fsl,imx-audio-sgtl5000";
++		model = "On-board Codec";
++		mux-ext-port = <5>;
++		mux-int-port = <1>;
++		ssi-controller = <&ssi1>;
++	};
++};
++
++&audmux {
++	status = "okay";
++};
++
++&ecspi2 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>;
++	fsl,spi-num-chipselects = <1>;
++	cs-gpios = <&gpio2 26 0>;
++	status = "okay";
++};
++
++&hdmi {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_hummingboard2_hdmi>;
++	ddc-i2c-bus = <&i2c2>;
++	status = "okay";
++};
++
++&i2c1 {
++	clock-frequency = <100000>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_hummingboard2_i2c1>;
++	status = "okay";
++
++	rtc: pcf8523@68 {
++		compatible = "nxp,pcf8523";
++		reg = <0x68>;
++		nxp,12p5_pf;
++	};
++
++	sgtl5000: sgtl5000@0a {
++		clocks = <&clks IMX6QDL_CLK_CKO>;
++		compatible = "fsl,sgtl5000";
++		pinctrl-names = "default";
++		pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>;
++		reg = <0x0a>;
++		VDDA-supply = <&reg_3p3v>;
++		VDDIO-supply = <&reg_3p3v>;
++	};
++};
++
++&i2c2 {
++	clock-frequency = <100000>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_hummingboard2_i2c2>;
++	status = "okay";
++};
++
++&i2c3 {
++	clock-frequency = <100000>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_hummingboard2_i2c3>;
++	status = "okay";
++};
++
++&iomuxc {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_hog>;
++	hummingboard2 {
++		pinctrl_hog: hoggrp {
++		fsl,pins = <
++				/*
++				 * 36 pin headers GPIO description. The pins
++				 * numbering as following -
++				 *
++				 * 	3.2v	5v	74	75
++				 *	73	72	71	70
++				 *	69	68	67	66
++				 *
++				 *	77	78	79	76
++				 *	65	64	61	60
++				 *	53	52	51	50
++				 *	49	48	166	132
++				 *	95	94	90	91
++				 *	GND	54	24	204
++				 *
++				 * The GPIO numbers can be extracted using
++				 * signal name from below.
++				 * Example -
++				 * MX6QDL_PAD_EIM_DA10__GPIO3_IO10 is
++				 * GPIO(3,10) which is (3-1)*32+10 = gpio 74
++				 *
++				 * i.e. The mapping of GPIO(X,Y) to Linux gpio
++				 * number is : gpio number = (X-1) * 32 + Y
++				 */
++				/* DI1_PIN15 */
++				MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x400130b1
++				/* DI1_PIN02 */
++				MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x400130b1
++				/* DISP1_DATA00 */
++				MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x400130b1
++				/* DISP1_DATA01 */
++				MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x400130b1
++				/* DISP1_DATA02 */
++				MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x400130b1
++				/* DISP1_DATA03 */
++				MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x400130b1
++				/* DISP1_DATA04 */
++				MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x400130b1
++				/* DISP1_DATA05 */
++				MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x400130b1
++				/* DISP1_DATA06 */
++				MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x400130b1
++				/* DISP1_DATA07 */
++				MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x400130b1
++				/* DI1_D0_CS */
++				MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x400130b1
++				/* DI1_D1_CS */
++				MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x400130b1
++				/* DI1_PIN01 */
++				MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x400130b1
++				/* DI1_PIN03 */
++				MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x400130b1
++				/* DISP1_DATA08 */
++				MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x400130b1
++				/* DISP1_DATA09 */
++				MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x400130b1
++				/* DISP1_DATA10 */
++				MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x400130b1
++				/* DISP1_DATA11 */
++				MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x400130b1
++				/* DISP1_DATA12 */
++				MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x400130b1
++				/* DISP1_DATA13 */
++				MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x400130b1
++				/* DISP1_DATA14 */
++				MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x400130b1
++				/* DISP1_DATA15 */
++				MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x400130b1
++				/* DISP1_DATA16 */
++				MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x400130b1
++				/* DISP1_DATA17 */
++				MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x400130b1
++				/* DISP1_DATA18 */
++				MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x400130b1
++				/* DISP1_DATA19 */
++				MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x400130b1
++				/* DISP1_DATA20 */
++				MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x400130b1
++				/* DISP1_DATA21 */
++				MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x400130b1
++				/* DISP1_DATA22 */
++				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x400130b1
++				/* DISP1_DATA23 */
++				MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400130b1
++				/* DI1_DISP_CLK */
++				MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x400130b1
++				/* SPDIF_IN */
++				MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x400130b1
++				/* SPDIF_OUT */
++				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x400130b1
++
++				/* MikroBUS GPIO pin number 10 */
++				MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1
++			>;
++		};
++
++		pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9 {
++			fsl,pins = <
++				MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000
++			>;
++		};
++
++		pinctrl_hummingboard2_hdmi: hummingboard2-hdmi {
++			fsl,pins = <
++				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
++			>;
++		};
++
++		pinctrl_hummingboard2_i2c1: hummingboard2-i2c1 {
++			fsl,pins = <
++				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
++				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
++			>;
++		};
++
++		pinctrl_hummingboard2_i2c2: hummingboard2-i2c2 {
++			fsl,pins = <
++				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
++				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
++			>;
++		};
++
++		pinctrl_hummingboard2_i2c3: hummingboard2-i2c3 {
++			fsl,pins = <
++				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
++				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
++			>;
++		};
++
++                pinctrl_hummingboard2_mipi: hummingboard2_mipi {
++                        fsl,pins = <
++                                MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x4001b8b1
++                                MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x4001b8b1
++                                MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
++                        >;
++                };
++
++		pinctrl_hummingboard2_pcie_reset: hummingboard2-pcie-reset {
++			fsl,pins = <
++				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b1
++			>;
++		};
++
++		pinctrl_hummingboard2_pwm1: pwm1grp {
++			fsl,pins = <
++				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1
++			>;
++		};
++
++		pinctrl_hummingboard2_sgtl5000: hummingboard2-sgtl5000 {
++			fsl,pins = <
++				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
++				MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
++				MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
++				MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
++				MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
++			>;
++		};
++
++		pinctrl_hummingboard2_usbh1_vbus: hummingboard2-usbh1-vbus {
++			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
++		};
++
++		pinctrl_hummingboard2_usbh2_vbus: hummingboard2-usbh2-vbus {
++			fsl,pins = <MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0>;
++		};
++
++		pinctrl_hummingboard2_usbh3_vbus: hummingboard2-usbh3-vbus {
++			fsl,pins = <MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x1b0b0>;
++		};
++
++		pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-id {
++			/*
++			 * Similar to pinctrl_usbotg_2, but we want it
++			 * pulled down for a fixed host connection.
++			 */
++			fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
++		};
++
++		pinctrl_hummingboard2_usbotg_vbus: hummingboard2-usbotg-vbus {
++			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
++		};
++
++		pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-aux {
++			fsl,pins = <
++				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
++				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
++			>;
++		};
++
++		pinctrl_hummingboard2_usdhc2: hummingboard2-usdhc2 {
++			fsl,pins = <
++				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
++				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
++				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
++				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
++				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
++				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
++			>;
++		};
++
++		pinctrl_hummingboard2_usdhc2_100mhz: hummingboard2-usdhc2-100mhz {
++			fsl,pins = <
++				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170b9
++				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100b9
++				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
++				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
++				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
++				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9
++			>;
++		};
++
++		pinctrl_hummingboard2_usdhc2_200mhz: hummingboard2-usdhc2-200mhz {
++			fsl,pins = <
++				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170f9
++				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100f9
++				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
++				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
++				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
++				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9
++			>;
++		};
++
++		pinctrl_hummingboard2_vmmc: hummingboard2-vmmc {
++			fsl,pins = <
++				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
++			>;
++		};
++
++		pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3 {
++			fsl,pins = <
++				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
++				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
++				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
++				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
++				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
++				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
++				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
++				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
++				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
++				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
++				MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
++			>;
++		};
++
++		pinctrl_hummingboard2_uart3: hummingboard2-uart3 {
++			fsl,pins = <
++				MX6QDL_PAD_EIM_D25__UART3_TX_DATA	0x1b0b1
++				MX6QDL_PAD_EIM_D24__UART3_RX_DATA	0x40013000
++			>;
++		};
++
++		pinctrl_hummingboard2_ecspi2: hummingboard2-ecspi2grp {
++			fsl,pins = <
++				MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
++				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
++				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
++				MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x000b1 /* CS */
++			>;
++		};
++	};
++};
++
++&ldb {
++	status = "disabled";
++
++	lvds-channel@0 {
++		fsl,data-mapping = "spwg";
++		fsl,data-width = <18>;
++	};
++};
++
++&pcie {
++	pinctrl-names = "default";
++	pinctrl-0 = <
++		&pinctrl_hummingboard2_pcie_reset
++	>;
++	reset-gpio = <&gpio2 11 0>;
++	status = "okay";
++};
++
++&pwm1 {
++        pinctrl-names = "default";
++        pinctrl-0 = <&pinctrl_hummingboard2_pwm1>;
++        status = "okay";
++};
++
++&pwm3 {
++	status = "disabled";
++};
++
++&pwm4 {
++	status = "disabled";
++};
++
++&ssi1 {
++	fsl,mode = "i2s-slave";
++	status = "okay";
++};
++
++&usbh1 {
++	disable-over-current;
++	vbus-supply = <&reg_usbh1_vbus>;
++	status = "okay";
++};
++
++&usbotg {
++	disable-over-current;
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_hummingboard2_usbotg_id>;
++	vbus-supply = <&reg_usbotg_vbus>;
++	status = "okay";
++};
++
++&usdhc2 {
++	pinctrl-names = "default", "state_100mhz", "state_200mhz";
++	pinctrl-0 = <
++		&pinctrl_hummingboard2_usdhc2_aux
++		&pinctrl_hummingboard2_usdhc2
++	>;
++	pinctrl-1 = <
++		&pinctrl_hummingboard2_usdhc2_aux
++		&pinctrl_hummingboard2_usdhc2_100mhz
++	>;
++	pinctrl-2 = <
++		&pinctrl_hummingboard2_usdhc2_aux
++		&pinctrl_hummingboard2_usdhc2_200mhz
++	>;
++	vmmc-supply = <&reg_usdhc2_vmmc>;
++	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
++	status = "okay";
++};
++
++&usdhc3 {
++	pinctrl-names = "default";
++	pinctrl-0 = <
++		&pinctrl_hummingboard2_usdhc3
++	>;
++	vmmc-supply = <&reg_3p3v>;
++	vqmmc-supply = <&reg_3p3v>;
++	bus-width = <8>;
++	non-removable;
++	status = "okay";
++};
++
++&uart3 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_hummingboard2_uart3>;
++	status = "okay";
++};
+-- 
+2.9.3
+
diff --git a/gitrev b/gitrev
index 52e6b4ebb..f2a25dfda 100644
--- a/gitrev
+++ b/gitrev
@@ -1 +1 @@
-81aaeaac461071c591cbd188748ad875e0efae7e
+e90665a5d38b17fdbe484a85fbba917a7006522d
diff --git a/kernel.spec b/kernel.spec
index c5215f13f..ab764c31a 100644
--- a/kernel.spec
+++ b/kernel.spec
@@ -77,7 +77,7 @@ Summary: The Linux kernel
 # The rc snapshot level
 %global rcrev 4
 # The git snapshot level
-%define gitrev 3
+%define gitrev 4
 # Set rpm version accordingly
 %define rpmversion 4.%{upstream_sublevel}.0
 %endif
@@ -541,6 +541,9 @@ Patch431: bcm283x-mmc-imp-speed.patch
 
 Patch432: bcm283x-VEC.patch
 
+# http://www.spinics.net/lists/arm-kernel/msg552554.html
+Patch434: arm-imx6-hummingboard2.patch
+
 Patch460: lib-cpumask-Make-CPUMASK_OFFSTACK-usable-without-deb.patch
 
 Patch466: input-kill-stupid-messages.patch
@@ -601,6 +604,9 @@ Patch849: 0001-iio-Use-event-header-from-kernel-tree.patch
 # Fix build issue with armada_trace
 Patch851: Armada-trace-build-fix.patch
 
+# selinux: allow context mounts on tmpfs, ramfs, devpts within user namespaces
+Patch852: selinux-allow-context-mounts-on-tmpfs-etc.patch
+
 # END OF PATCH DEFINITIONS
 
 %endif
@@ -2174,6 +2180,12 @@ fi
 #
 #
 %changelog
+* Fri Jan 20 2017 Justin M. Forbes <jforbes@fedoraproject.org> - 4.10.0-0.rc4.git4.1
+- Linux v4.10-rc4-199-ge90665a
+
+* Fri Jan 20 2017 Peter Robinson <pbrobinson@fedoraproject.org>
+- Initial DT support for Hummingboard 2 (Edge/Gate)
+
 * Thu Jan 19 2017 Justin M. Forbes <jforbes@fedoraproject.org> - 4.10.0-0.rc4.git3.1
 - Linux v4.10-rc4-122-g81aaeaa
 
diff --git a/selinux-allow-context-mounts-on-tmpfs-etc.patch b/selinux-allow-context-mounts-on-tmpfs-etc.patch
new file mode 100644
index 000000000..cbb5b8cdf
--- /dev/null
+++ b/selinux-allow-context-mounts-on-tmpfs-etc.patch
@@ -0,0 +1,57 @@
+From 01593d3299a1cfdb5e08acf95f63ec59dd674906 Mon Sep 17 00:00:00 2001
+From: Stephen Smalley <sds@tycho.nsa.gov>
+Date: Mon, 9 Jan 2017 10:07:31 -0500
+Subject: [PATCH] selinux: allow context mounts on tmpfs, ramfs, devpts within
+ user namespaces
+
+commit aad82892af261b9903cc11c55be3ecf5f0b0b4f8 ("selinux: Add support for
+unprivileged mounts from user namespaces") prohibited any use of context
+mount options within non-init user namespaces.  However, this breaks
+use of context mount options for tmpfs mounts within user namespaces,
+which are being used by Docker/runc.  There is no reason to block such
+usage for tmpfs, ramfs or devpts.  Exempt these filesystem types
+from this restriction.
+
+Before:
+sh$ userns_child_exec  -p -m -U -M '0 1000 1' -G '0 1000 1' bash
+sh# mount -t tmpfs -o context=system_u:object_r:user_tmp_t:s0:c13 none /tmp
+mount: tmpfs is write-protected, mounting read-only
+mount: cannot mount tmpfs read-only
+
+After:
+sh$ userns_child_exec  -p -m -U -M '0 1000 1' -G '0 1000 1' bash
+sh# mount -t tmpfs -o context=system_u:object_r:user_tmp_t:s0:c13 none /tmp
+sh# ls -Zd /tmp
+unconfined_u:object_r:user_tmp_t:s0:c13 /tmp
+
+Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
+Signed-off-by: Paul Moore <paul@paul-moore.com>
+---
+ security/selinux/hooks.c | 10 +++++++---
+ 1 file changed, 7 insertions(+), 3 deletions(-)
+
+diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
+index e4b953f..e32f4b5 100644
+--- a/security/selinux/hooks.c
++++ b/security/selinux/hooks.c
+@@ -834,10 +834,14 @@ static int selinux_set_mnt_opts(struct super_block *sb,
+ 	}
+ 
+ 	/*
+-	 * If this is a user namespace mount, no contexts are allowed
+-	 * on the command line and security labels must be ignored.
++	 * If this is a user namespace mount and the filesystem type is not
++	 * explicitly whitelisted, then no contexts are allowed on the command
++	 * line and security labels must be ignored.
+ 	 */
+-	if (sb->s_user_ns != &init_user_ns) {
++	if (sb->s_user_ns != &init_user_ns &&
++	    strcmp(sb->s_type->name, "tmpfs") &&
++	    strcmp(sb->s_type->name, "ramfs") &&
++	    strcmp(sb->s_type->name, "devpts")) {
+ 		if (context_sid || fscontext_sid || rootcontext_sid ||
+ 		    defcontext_sid) {
+ 			rc = -EACCES;
+-- 
+2.9.3
+
diff --git a/sources b/sources
index 84f18db54..3b44b8531 100644
--- a/sources
+++ b/sources
@@ -1,4 +1,4 @@
 SHA512 (linux-4.9.tar.xz) = bf67ff812cc3cb7e5059e82cc5db0d9a7c5637f7ed9a42e4730c715bf7047c81ed3a571225f92a33ef0b6d65f35595bc32d773356646df2627da55e9bc7f1f1a
 SHA512 (perf-man-4.9.tar.gz) = d23bb3da1eadd6623fddbf4696948de7675f3dcf57c711a7427dd7ae111394f58d8f42752938bbea7cd219f1e7f6f116fc67a1c74f769711063940a065f37b99
 SHA512 (patch-4.10-rc4.xz) = 89d903d52ff907f3911ac09214d1299c310fd67b7ff36170c6233e6348049fb0f669ba245a8ca310f52c91eb523aa5f91a9b52f4c67ca932b951fe2c60f25ae5
-SHA512 (patch-4.10-rc4-git3.xz) = f828c62b03e2814b2cf6aadab27a1d262917871cb2d4d696360dd0dee0765aaec0bf1621de6d67d133613b455be1c6251437d59920fde31c0f52cd9e081339b0
+SHA512 (patch-4.10-rc4-git4.xz) = aac2b5ff9120aab1c7aa539eca02c7e743e064f8788c51338cf8855a17cd225ebc36261c9e27da398fbbb42ec2742f202a084fef01ddf3e18861d1fdd1483897