kernel-5.8.0-0.rc5.1

* Mon Jul 13 2020 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.8.0-0.rc5.1]
- v5.8-rc5 rebase
- arm64: dts: sun50i-a64-pinephone: Add touchscreen support (Ondrej Jirman)
- arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone (Icenowy Zheng)
- drm/panel: st7703: Assert reset prior to powering down the regulators (Ondrej Jirman)
- drm/panel: st7703: Enter sleep after display off (Ondrej Jirman)
- drm/panel: st7703: Add support for Xingbangda XBD599 (Ondrej Jirman)
- drm/panel: st7703: Move generic part of init sequence to enable callback (Ondrej Jirman)
- drm/panel: st7703: Move code specific to jh057n closer together (Ondrej Jirman)
- drm/panel: st7703: Prepare for supporting multiple panels (Ondrej Jirman)
- drm/panel: st7703: Rename functions from jh057n prefix to st7703 (Ondrej Jirman)
- drm/panel: rocktech-jh057n00900: Rename the driver to st7703 (Ondrej Jirman)
- dt-bindings: panel: Add compatible for Xingbangda XBD599 panel (Ondrej Jirman)
- dt-bindings: panel: Convert rocktech, jh057n00900 to yaml (Ondrej Jirman)
- dt-bindings: vendor-prefixes: Add Xingbangda (Icenowy Zheng)
- Revert "arm64: allwinner: dts: a64: add LCD-related device nodes for PinePhone" (Peter Robinson)
- Revert "drm/sun4i: sun6i_mipi_dsi: fix horizontal timing calculation" (Peter Robinson)
- Revert "drm: panel: add Xingbangda XBD599 panel" (Peter Robinson)
- Revert "dt-bindings: panel: add binding for Xingbangda XBD599 panel" (Peter Robinson)
- selinux: allow reading labels before policy is loaded (Jonathan Lebon)
- Fixes "acpi: prefer booting with ACPI over DTS" to be RHEL only (Peter Robinson)
- Update config for renamed panel driver. (Peter Robinson)
- Enable SERIAL_SC16IS7XX for SPI interfaces (Peter Robinson)
- Updated changelog for the release based on dcde237b9b0e (Fedora Kernel Team)
Resolves: rhbz#

Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>

1 files changed, 948 insertions, 0 deletions

diff --git a/0001-drm-panel-rocktech-jh057n00900-Rename-the-driver-to-.patch b/0001-drm-panel-rocktech-jh057n00900-Rename-the-driver-to-.patch
new file mode 100644
index 000000000..d78bf5644
--- /dev/null
+++ b/0001-drm-panel-rocktech-jh057n00900-Rename-the-driver-to-.patch
@@ -0,0 +1,948 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Ondrej Jirman <megous@megous.com>
+Date: Fri, 26 Jun 2020 02:55:52 +0200
+Subject: [PATCH] drm/panel: rocktech-jh057n00900: Rename the driver to st7703
+
+This rename is done so that the driver matches the name of the
+display controller and in preparation for adding support for more
+panels to the driver.
+
+This is just a basic file rename, with no code changes.
+
+Signed-off-by: Ondrej Jirman <megous@megous.com>
+---
+ drivers/gpu/drm/panel/Kconfig                 |  26 +-
+ drivers/gpu/drm/panel/Makefile                |   2 +-
+ .../drm/panel/panel-rocktech-jh057n00900.c    | 424 ------------------
+ drivers/gpu/drm/panel/panel-sitronix-st7703.c | 424 ++++++++++++++++++
+ 4 files changed, 438 insertions(+), 438 deletions(-)
+ delete mode 100644 drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
+ create mode 100644 drivers/gpu/drm/panel/panel-sitronix-st7703.c
+
+diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
+index 39055c1f0e2f..de2f2a452be5 100644
+--- a/drivers/gpu/drm/panel/Kconfig
++++ b/drivers/gpu/drm/panel/Kconfig
+@@ -283,19 +283,6 @@ config DRM_PANEL_RAYDIUM_RM68200
+ 	  Say Y here if you want to enable support for Raydium RM68200
+ 	  720x1280 DSI video mode panel.
+
+-config DRM_PANEL_ROCKTECH_JH057N00900
+-	tristate "Rocktech JH057N00900 MIPI touchscreen panel"
+-	depends on OF
+-	depends on DRM_MIPI_DSI
+-	depends on BACKLIGHT_CLASS_DEVICE
+-	help
+-	  Say Y here if you want to enable support for Rocktech JH057N00900
+-	  MIPI DSI panel as e.g. used in the Librem 5 devkit. It has a
+-	  resolution of 720x1440 pixels, a built in backlight and touch
+-	  controller.
+-	  Touch input support is provided by the goodix driver and needs to be
+-	  selected separately.
+-
+ config DRM_PANEL_RONBO_RB070D30
+ 	tristate "Ronbo Electronics RB070D30 panel"
+ 	depends on OF
+@@ -395,6 +382,19 @@ config DRM_PANEL_SITRONIX_ST7701
+ 	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
+ 	  system interfaces.
+
++config DRM_PANEL_SITRONIX_ST7703
++	tristate "Sitronix ST7703 based MIPI touchscreen panels"
++	depends on OF
++	depends on DRM_MIPI_DSI
++	depends on BACKLIGHT_CLASS_DEVICE
++	help
++	  Say Y here if you want to enable support for Sitronix ST7703 based
++	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
++	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
++	  in backlight and touch controller.
++	  Touch input support is provided by the goodix driver and needs to be
++	  selected separately.
++
+ config DRM_PANEL_SITRONIX_ST7789V
+ 	tristate "Sitronix ST7789V panel"
+ 	depends on OF && SPI
+diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
+index de74f282c433..e45ceac6286f 100644
+--- a/drivers/gpu/drm/panel/Makefile
++++ b/drivers/gpu/drm/panel/Makefile
+@@ -27,7 +27,6 @@ obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o
+ obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen.o
+ obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM67191) += panel-raydium-rm67191.o
+ obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o
+-obj-$(CONFIG_DRM_PANEL_ROCKTECH_JH057N00900) += panel-rocktech-jh057n00900.o
+ obj-$(CONFIG_DRM_PANEL_RONBO_RB070D30) += panel-ronbo-rb070d30.o
+ obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
+ obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D16D0) += panel-samsung-s6d16d0.o
+@@ -41,6 +40,7 @@ obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
+ obj-$(CONFIG_DRM_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
+ obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
+ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
++obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
+ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
+ obj-$(CONFIG_DRM_PANEL_SONY_ACX424AKP) += panel-sony-acx424akp.o
+ obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
+diff --git a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
+deleted file mode 100644
+index 38ff742bc120..000000000000
+--- a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
++++ /dev/null
+@@ -1,424 +0,0 @@
+-// SPDX-License-Identifier: GPL-2.0
+-/*
+- * Rockteck jh057n00900 5.5" MIPI-DSI panel driver
+- *
+- * Copyright (C) Purism SPC 2019
+- */
+-
+-#include <linux/debugfs.h>
+-#include <linux/delay.h>
+-#include <linux/gpio/consumer.h>
+-#include <linux/media-bus-format.h>
+-#include <linux/mod_devicetable.h>
+-#include <linux/module.h>
+-#include <linux/regulator/consumer.h>
+-
+-#include <video/display_timing.h>
+-#include <video/mipi_display.h>
+-
+-#include <drm/drm_mipi_dsi.h>
+-#include <drm/drm_modes.h>
+-#include <drm/drm_panel.h>
+-#include <drm/drm_print.h>
+-
+-#define DRV_NAME "panel-rocktech-jh057n00900"
+-
+-/* Manufacturer specific Commands send via DSI */
+-#define ST7703_CMD_ALL_PIXEL_OFF 0x22
+-#define ST7703_CMD_ALL_PIXEL_ON	 0x23
+-#define ST7703_CMD_SETDISP	 0xB2
+-#define ST7703_CMD_SETRGBIF	 0xB3
+-#define ST7703_CMD_SETCYC	 0xB4
+-#define ST7703_CMD_SETBGP	 0xB5
+-#define ST7703_CMD_SETVCOM	 0xB6
+-#define ST7703_CMD_SETOTP	 0xB7
+-#define ST7703_CMD_SETPOWER_EXT	 0xB8
+-#define ST7703_CMD_SETEXTC	 0xB9
+-#define ST7703_CMD_SETMIPI	 0xBA
+-#define ST7703_CMD_SETVDC	 0xBC
+-#define ST7703_CMD_UNKNOWN0	 0xBF
+-#define ST7703_CMD_SETSCR	 0xC0
+-#define ST7703_CMD_SETPOWER	 0xC1
+-#define ST7703_CMD_SETPANEL	 0xCC
+-#define ST7703_CMD_SETGAMMA	 0xE0
+-#define ST7703_CMD_SETEQ	 0xE3
+-#define ST7703_CMD_SETGIP1	 0xE9
+-#define ST7703_CMD_SETGIP2	 0xEA
+-
+-struct jh057n {
+-	struct device *dev;
+-	struct drm_panel panel;
+-	struct gpio_desc *reset_gpio;
+-	struct regulator *vcc;
+-	struct regulator *iovcc;
+-	bool prepared;
+-
+-	struct dentry *debugfs;
+-};
+-
+-static inline struct jh057n *panel_to_jh057n(struct drm_panel *panel)
+-{
+-	return container_of(panel, struct jh057n, panel);
+-}
+-
+-#define dsi_generic_write_seq(dsi, seq...) do {				\
+-		static const u8 d[] = { seq };				\
+-		int ret;						\
+-		ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d));	\
+-		if (ret < 0)						\
+-			return ret;					\
+-	} while (0)
+-
+-static int jh057n_init_sequence(struct jh057n *ctx)
+-{
+-	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+-	struct device *dev = ctx->dev;
+-	int ret;
+-
+-	/*
+-	 * Init sequence was supplied by the panel vendor. Most of the commands
+-	 * resemble the ST7703 but the number of parameters often don't match
+-	 * so it's likely a clone.
+-	 */
+-	dsi_generic_write_seq(dsi, ST7703_CMD_SETEXTC,
+-			      0xF1, 0x12, 0x83);
+-	dsi_generic_write_seq(dsi, ST7703_CMD_SETRGBIF,
+-			      0x10, 0x10, 0x05, 0x05, 0x03, 0xFF, 0x00, 0x00,
+-			      0x00, 0x00);
+-	dsi_generic_write_seq(dsi, ST7703_CMD_SETSCR,
+-			      0x73, 0x73, 0x50, 0x50, 0x00, 0x00, 0x08, 0x70,
+-			      0x00);
+-	dsi_generic_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
+-	dsi_generic_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
+-	dsi_generic_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
+-	dsi_generic_write_seq(dsi, ST7703_CMD_SETDISP, 0xF0, 0x12, 0x30);
+-	dsi_generic_write_seq(dsi, ST7703_CMD_SETEQ,
+-			      0x07, 0x07, 0x0B, 0x0B, 0x03, 0x0B, 0x00, 0x00,
+-			      0x00, 0x00, 0xFF, 0x00, 0xC0, 0x10);
+-	dsi_generic_write_seq(dsi, ST7703_CMD_SETBGP, 0x08, 0x08);
+-	msleep(20);
+-
+-	dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F);
+-	dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN0, 0x02, 0x11, 0x00);
+-	dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1,
+-			      0x82, 0x10, 0x06, 0x05, 0x9E, 0x0A, 0xA5, 0x12,
+-			      0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
+-			      0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
+-			      0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88,
+-			      0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64,
+-			      0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+-			      0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+-			      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+-	dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP2,
+-			      0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+-			      0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
+-			      0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
+-			      0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+-			      0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00,
+-			      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+-			      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x0A,
+-			      0xA5, 0x00, 0x00, 0x00, 0x00);
+-	dsi_generic_write_seq(dsi, ST7703_CMD_SETGAMMA,
+-			      0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41, 0x37,
+-			      0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10, 0x11,
+-			      0x18, 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41,
+-			      0x37, 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10,
+-			      0x11, 0x18);
+-	msleep(20);
+-
+-	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+-	if (ret < 0) {
+-		DRM_DEV_ERROR(dev, "Failed to exit sleep mode: %d\n", ret);
+-		return ret;
+-	}
+-	/* Panel is operational 120 msec after reset */
+-	msleep(60);
+-	ret = mipi_dsi_dcs_set_display_on(dsi);
+-	if (ret)
+-		return ret;
+-
+-	DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n");
+-	return 0;
+-}
+-
+-static int jh057n_enable(struct drm_panel *panel)
+-{
+-	struct jh057n *ctx = panel_to_jh057n(panel);
+-	int ret;
+-
+-	ret = jh057n_init_sequence(ctx);
+-	if (ret < 0) {
+-		DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
+-			      ret);
+-		return ret;
+-	}
+-
+-	return 0;
+-}
+-
+-static int jh057n_disable(struct drm_panel *panel)
+-{
+-	struct jh057n *ctx = panel_to_jh057n(panel);
+-	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+-
+-	return mipi_dsi_dcs_set_display_off(dsi);
+-}
+-
+-static int jh057n_unprepare(struct drm_panel *panel)
+-{
+-	struct jh057n *ctx = panel_to_jh057n(panel);
+-
+-	if (!ctx->prepared)
+-		return 0;
+-
+-	regulator_disable(ctx->iovcc);
+-	regulator_disable(ctx->vcc);
+-	ctx->prepared = false;
+-
+-	return 0;
+-}
+-
+-static int jh057n_prepare(struct drm_panel *panel)
+-{
+-	struct jh057n *ctx = panel_to_jh057n(panel);
+-	int ret;
+-
+-	if (ctx->prepared)
+-		return 0;
+-
+-	DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
+-	ret = regulator_enable(ctx->vcc);
+-	if (ret < 0) {
+-		DRM_DEV_ERROR(ctx->dev,
+-			      "Failed to enable vcc supply: %d\n", ret);
+-		return ret;
+-	}
+-	ret = regulator_enable(ctx->iovcc);
+-	if (ret < 0) {
+-		DRM_DEV_ERROR(ctx->dev,
+-			      "Failed to enable iovcc supply: %d\n", ret);
+-		goto disable_vcc;
+-	}
+-
+-	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+-	usleep_range(20, 40);
+-	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+-	msleep(20);
+-
+-	ctx->prepared = true;
+-
+-	return 0;
+-
+-disable_vcc:
+-	regulator_disable(ctx->vcc);
+-	return ret;
+-}
+-
+-static const struct drm_display_mode default_mode = {
+-	.hdisplay    = 720,
+-	.hsync_start = 720 + 90,
+-	.hsync_end   = 720 + 90 + 20,
+-	.htotal	     = 720 + 90 + 20 + 20,
+-	.vdisplay    = 1440,
+-	.vsync_start = 1440 + 20,
+-	.vsync_end   = 1440 + 20 + 4,
+-	.vtotal	     = 1440 + 20 + 4 + 12,
+-	.vrefresh    = 60,
+-	.clock	     = 75276,
+-	.flags	     = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+-	.width_mm    = 65,
+-	.height_mm   = 130,
+-};
+-
+-static int jh057n_get_modes(struct drm_panel *panel,
+-			    struct drm_connector *connector)
+-{
+-	struct jh057n *ctx = panel_to_jh057n(panel);
+-	struct drm_display_mode *mode;
+-
+-	mode = drm_mode_duplicate(connector->dev, &default_mode);
+-	if (!mode) {
+-		DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n",
+-			      default_mode.hdisplay, default_mode.vdisplay,
+-			      default_mode.vrefresh);
+-		return -ENOMEM;
+-	}
+-
+-	drm_mode_set_name(mode);
+-
+-	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+-	connector->display_info.width_mm = mode->width_mm;
+-	connector->display_info.height_mm = mode->height_mm;
+-	drm_mode_probed_add(connector, mode);
+-
+-	return 1;
+-}
+-
+-static const struct drm_panel_funcs jh057n_drm_funcs = {
+-	.disable   = jh057n_disable,
+-	.unprepare = jh057n_unprepare,
+-	.prepare   = jh057n_prepare,
+-	.enable	   = jh057n_enable,
+-	.get_modes = jh057n_get_modes,
+-};
+-
+-static int allpixelson_set(void *data, u64 val)
+-{
+-	struct jh057n *ctx = data;
+-	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+-
+-	DRM_DEV_DEBUG_DRIVER(ctx->dev, "Setting all pixels on\n");
+-	dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON);
+-	msleep(val * 1000);
+-	/* Reset the panel to get video back */
+-	drm_panel_disable(&ctx->panel);
+-	drm_panel_unprepare(&ctx->panel);
+-	drm_panel_prepare(&ctx->panel);
+-	drm_panel_enable(&ctx->panel);
+-
+-	return 0;
+-}
+-
+-DEFINE_SIMPLE_ATTRIBUTE(allpixelson_fops, NULL,
+-			allpixelson_set, "%llu\n");
+-
+-static void jh057n_debugfs_init(struct jh057n *ctx)
+-{
+-	ctx->debugfs = debugfs_create_dir(DRV_NAME, NULL);
+-
+-	debugfs_create_file("allpixelson", 0600, ctx->debugfs, ctx,
+-			    &allpixelson_fops);
+-}
+-
+-static void jh057n_debugfs_remove(struct jh057n *ctx)
+-{
+-	debugfs_remove_recursive(ctx->debugfs);
+-	ctx->debugfs = NULL;
+-}
+-
+-static int jh057n_probe(struct mipi_dsi_device *dsi)
+-{
+-	struct device *dev = &dsi->dev;
+-	struct jh057n *ctx;
+-	int ret;
+-
+-	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+-	if (!ctx)
+-		return -ENOMEM;
+-
+-	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+-	if (IS_ERR(ctx->reset_gpio)) {
+-		DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
+-		return PTR_ERR(ctx->reset_gpio);
+-	}
+-
+-	mipi_dsi_set_drvdata(dsi, ctx);
+-
+-	ctx->dev = dev;
+-
+-	dsi->lanes = 4;
+-	dsi->format = MIPI_DSI_FMT_RGB888;
+-	dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
+-		MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+-
+-	ctx->vcc = devm_regulator_get(dev, "vcc");
+-	if (IS_ERR(ctx->vcc)) {
+-		ret = PTR_ERR(ctx->vcc);
+-		if (ret != -EPROBE_DEFER)
+-			DRM_DEV_ERROR(dev,
+-				      "Failed to request vcc regulator: %d\n",
+-				      ret);
+-		return ret;
+-	}
+-	ctx->iovcc = devm_regulator_get(dev, "iovcc");
+-	if (IS_ERR(ctx->iovcc)) {
+-		ret = PTR_ERR(ctx->iovcc);
+-		if (ret != -EPROBE_DEFER)
+-			DRM_DEV_ERROR(dev,
+-				      "Failed to request iovcc regulator: %d\n",
+-				      ret);
+-		return ret;
+-	}
+-
+-	drm_panel_init(&ctx->panel, dev, &jh057n_drm_funcs,
+-		       DRM_MODE_CONNECTOR_DSI);
+-
+-	ret = drm_panel_of_backlight(&ctx->panel);
+-	if (ret)
+-		return ret;
+-
+-	drm_panel_add(&ctx->panel);
+-
+-	ret = mipi_dsi_attach(dsi);
+-	if (ret < 0) {
+-		DRM_DEV_ERROR(dev,
+-			      "mipi_dsi_attach failed (%d). Is host ready?\n",
+-			      ret);
+-		drm_panel_remove(&ctx->panel);
+-		return ret;
+-	}
+-
+-	DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
+-		     default_mode.hdisplay, default_mode.vdisplay,
+-		     default_mode.vrefresh,
+-		     mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
+-
+-	jh057n_debugfs_init(ctx);
+-	return 0;
+-}
+-
+-static void jh057n_shutdown(struct mipi_dsi_device *dsi)
+-{
+-	struct jh057n *ctx = mipi_dsi_get_drvdata(dsi);
+-	int ret;
+-
+-	ret = drm_panel_unprepare(&ctx->panel);
+-	if (ret < 0)
+-		DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
+-			      ret);
+-
+-	ret = drm_panel_disable(&ctx->panel);
+-	if (ret < 0)
+-		DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
+-			      ret);
+-}
+-
+-static int jh057n_remove(struct mipi_dsi_device *dsi)
+-{
+-	struct jh057n *ctx = mipi_dsi_get_drvdata(dsi);
+-	int ret;
+-
+-	jh057n_shutdown(dsi);
+-
+-	ret = mipi_dsi_detach(dsi);
+-	if (ret < 0)
+-		DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
+-			      ret);
+-
+-	drm_panel_remove(&ctx->panel);
+-
+-	jh057n_debugfs_remove(ctx);
+-
+-	return 0;
+-}
+-
+-static const struct of_device_id jh057n_of_match[] = {
+-	{ .compatible = "rocktech,jh057n00900" },
+-	{ /* sentinel */ }
+-};
+-MODULE_DEVICE_TABLE(of, jh057n_of_match);
+-
+-static struct mipi_dsi_driver jh057n_driver = {
+-	.probe	= jh057n_probe,
+-	.remove = jh057n_remove,
+-	.shutdown = jh057n_shutdown,
+-	.driver = {
+-		.name = DRV_NAME,
+-		.of_match_table = jh057n_of_match,
+-	},
+-};
+-module_mipi_dsi_driver(jh057n_driver);
+-
+-MODULE_AUTHOR("Guido Günther <agx@sigxcpu.org>");
+-MODULE_DESCRIPTION("DRM driver for Rocktech JH057N00900 MIPI DSI panel");
+-MODULE_LICENSE("GPL v2");
+diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+new file mode 100644
+index 000000000000..38ff742bc120
+--- /dev/null
++++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+@@ -0,0 +1,424 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Rockteck jh057n00900 5.5" MIPI-DSI panel driver
++ *
++ * Copyright (C) Purism SPC 2019
++ */
++
++#include <linux/debugfs.h>
++#include <linux/delay.h>
++#include <linux/gpio/consumer.h>
++#include <linux/media-bus-format.h>
++#include <linux/mod_devicetable.h>
++#include <linux/module.h>
++#include <linux/regulator/consumer.h>
++
++#include <video/display_timing.h>
++#include <video/mipi_display.h>
++
++#include <drm/drm_mipi_dsi.h>
++#include <drm/drm_modes.h>
++#include <drm/drm_panel.h>
++#include <drm/drm_print.h>
++
++#define DRV_NAME "panel-rocktech-jh057n00900"
++
++/* Manufacturer specific Commands send via DSI */
++#define ST7703_CMD_ALL_PIXEL_OFF 0x22
++#define ST7703_CMD_ALL_PIXEL_ON	 0x23
++#define ST7703_CMD_SETDISP	 0xB2
++#define ST7703_CMD_SETRGBIF	 0xB3
++#define ST7703_CMD_SETCYC	 0xB4
++#define ST7703_CMD_SETBGP	 0xB5
++#define ST7703_CMD_SETVCOM	 0xB6
++#define ST7703_CMD_SETOTP	 0xB7
++#define ST7703_CMD_SETPOWER_EXT	 0xB8
++#define ST7703_CMD_SETEXTC	 0xB9
++#define ST7703_CMD_SETMIPI	 0xBA
++#define ST7703_CMD_SETVDC	 0xBC
++#define ST7703_CMD_UNKNOWN0	 0xBF
++#define ST7703_CMD_SETSCR	 0xC0
++#define ST7703_CMD_SETPOWER	 0xC1
++#define ST7703_CMD_SETPANEL	 0xCC
++#define ST7703_CMD_SETGAMMA	 0xE0
++#define ST7703_CMD_SETEQ	 0xE3
++#define ST7703_CMD_SETGIP1	 0xE9
++#define ST7703_CMD_SETGIP2	 0xEA
++
++struct jh057n {
++	struct device *dev;
++	struct drm_panel panel;
++	struct gpio_desc *reset_gpio;
++	struct regulator *vcc;
++	struct regulator *iovcc;
++	bool prepared;
++
++	struct dentry *debugfs;
++};
++
++static inline struct jh057n *panel_to_jh057n(struct drm_panel *panel)
++{
++	return container_of(panel, struct jh057n, panel);
++}
++
++#define dsi_generic_write_seq(dsi, seq...) do {				\
++		static const u8 d[] = { seq };				\
++		int ret;						\
++		ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d));	\
++		if (ret < 0)						\
++			return ret;					\
++	} while (0)
++
++static int jh057n_init_sequence(struct jh057n *ctx)
++{
++	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
++	struct device *dev = ctx->dev;
++	int ret;
++
++	/*
++	 * Init sequence was supplied by the panel vendor. Most of the commands
++	 * resemble the ST7703 but the number of parameters often don't match
++	 * so it's likely a clone.
++	 */
++	dsi_generic_write_seq(dsi, ST7703_CMD_SETEXTC,
++			      0xF1, 0x12, 0x83);
++	dsi_generic_write_seq(dsi, ST7703_CMD_SETRGBIF,
++			      0x10, 0x10, 0x05, 0x05, 0x03, 0xFF, 0x00, 0x00,
++			      0x00, 0x00);
++	dsi_generic_write_seq(dsi, ST7703_CMD_SETSCR,
++			      0x73, 0x73, 0x50, 0x50, 0x00, 0x00, 0x08, 0x70,
++			      0x00);
++	dsi_generic_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
++	dsi_generic_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
++	dsi_generic_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
++	dsi_generic_write_seq(dsi, ST7703_CMD_SETDISP, 0xF0, 0x12, 0x30);
++	dsi_generic_write_seq(dsi, ST7703_CMD_SETEQ,
++			      0x07, 0x07, 0x0B, 0x0B, 0x03, 0x0B, 0x00, 0x00,
++			      0x00, 0x00, 0xFF, 0x00, 0xC0, 0x10);
++	dsi_generic_write_seq(dsi, ST7703_CMD_SETBGP, 0x08, 0x08);
++	msleep(20);
++
++	dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F);
++	dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN0, 0x02, 0x11, 0x00);
++	dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1,
++			      0x82, 0x10, 0x06, 0x05, 0x9E, 0x0A, 0xA5, 0x12,
++			      0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
++			      0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
++			      0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88,
++			      0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64,
++			      0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
++			      0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++			      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
++	dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP2,
++			      0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++			      0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
++			      0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
++			      0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
++			      0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00,
++			      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++			      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x0A,
++			      0xA5, 0x00, 0x00, 0x00, 0x00);
++	dsi_generic_write_seq(dsi, ST7703_CMD_SETGAMMA,
++			      0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41, 0x37,
++			      0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10, 0x11,
++			      0x18, 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41,
++			      0x37, 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10,
++			      0x11, 0x18);
++	msleep(20);
++
++	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
++	if (ret < 0) {
++		DRM_DEV_ERROR(dev, "Failed to exit sleep mode: %d\n", ret);
++		return ret;
++	}
++	/* Panel is operational 120 msec after reset */
++	msleep(60);
++	ret = mipi_dsi_dcs_set_display_on(dsi);
++	if (ret)
++		return ret;
++
++	DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n");
++	return 0;
++}
++
++static int jh057n_enable(struct drm_panel *panel)
++{
++	struct jh057n *ctx = panel_to_jh057n(panel);
++	int ret;
++
++	ret = jh057n_init_sequence(ctx);
++	if (ret < 0) {
++		DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
++			      ret);
++		return ret;
++	}
++
++	return 0;
++}
++
++static int jh057n_disable(struct drm_panel *panel)
++{
++	struct jh057n *ctx = panel_to_jh057n(panel);
++	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
++
++	return mipi_dsi_dcs_set_display_off(dsi);
++}
++
++static int jh057n_unprepare(struct drm_panel *panel)
++{
++	struct jh057n *ctx = panel_to_jh057n(panel);
++
++	if (!ctx->prepared)
++		return 0;
++
++	regulator_disable(ctx->iovcc);
++	regulator_disable(ctx->vcc);
++	ctx->prepared = false;
++
++	return 0;
++}
++
++static int jh057n_prepare(struct drm_panel *panel)
++{
++	struct jh057n *ctx = panel_to_jh057n(panel);
++	int ret;
++
++	if (ctx->prepared)
++		return 0;
++
++	DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
++	ret = regulator_enable(ctx->vcc);
++	if (ret < 0) {
++		DRM_DEV_ERROR(ctx->dev,
++			      "Failed to enable vcc supply: %d\n", ret);
++		return ret;
++	}
++	ret = regulator_enable(ctx->iovcc);
++	if (ret < 0) {
++		DRM_DEV_ERROR(ctx->dev,
++			      "Failed to enable iovcc supply: %d\n", ret);
++		goto disable_vcc;
++	}
++
++	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
++	usleep_range(20, 40);
++	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
++	msleep(20);
++
++	ctx->prepared = true;
++
++	return 0;
++
++disable_vcc:
++	regulator_disable(ctx->vcc);
++	return ret;
++}
++
++static const struct drm_display_mode default_mode = {
++	.hdisplay    = 720,
++	.hsync_start = 720 + 90,
++	.hsync_end   = 720 + 90 + 20,
++	.htotal	     = 720 + 90 + 20 + 20,
++	.vdisplay    = 1440,
++	.vsync_start = 1440 + 20,
++	.vsync_end   = 1440 + 20 + 4,
++	.vtotal	     = 1440 + 20 + 4 + 12,
++	.vrefresh    = 60,
++	.clock	     = 75276,
++	.flags	     = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
++	.width_mm    = 65,
++	.height_mm   = 130,
++};
++
++static int jh057n_get_modes(struct drm_panel *panel,
++			    struct drm_connector *connector)
++{
++	struct jh057n *ctx = panel_to_jh057n(panel);
++	struct drm_display_mode *mode;
++
++	mode = drm_mode_duplicate(connector->dev, &default_mode);
++	if (!mode) {
++		DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n",
++			      default_mode.hdisplay, default_mode.vdisplay,
++			      default_mode.vrefresh);
++		return -ENOMEM;
++	}
++
++	drm_mode_set_name(mode);
++
++	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
++	connector->display_info.width_mm = mode->width_mm;
++	connector->display_info.height_mm = mode->height_mm;
++	drm_mode_probed_add(connector, mode);
++
++	return 1;
++}
++
++static const struct drm_panel_funcs jh057n_drm_funcs = {
++	.disable   = jh057n_disable,
++	.unprepare = jh057n_unprepare,
++	.prepare   = jh057n_prepare,
++	.enable	   = jh057n_enable,
++	.get_modes = jh057n_get_modes,
++};
++
++static int allpixelson_set(void *data, u64 val)
++{
++	struct jh057n *ctx = data;
++	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
++
++	DRM_DEV_DEBUG_DRIVER(ctx->dev, "Setting all pixels on\n");
++	dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON);
++	msleep(val * 1000);
++	/* Reset the panel to get video back */
++	drm_panel_disable(&ctx->panel);
++	drm_panel_unprepare(&ctx->panel);
++	drm_panel_prepare(&ctx->panel);
++	drm_panel_enable(&ctx->panel);
++
++	return 0;
++}
++
++DEFINE_SIMPLE_ATTRIBUTE(allpixelson_fops, NULL,
++			allpixelson_set, "%llu\n");
++
++static void jh057n_debugfs_init(struct jh057n *ctx)
++{
++	ctx->debugfs = debugfs_create_dir(DRV_NAME, NULL);
++
++	debugfs_create_file("allpixelson", 0600, ctx->debugfs, ctx,
++			    &allpixelson_fops);
++}
++
++static void jh057n_debugfs_remove(struct jh057n *ctx)
++{
++	debugfs_remove_recursive(ctx->debugfs);
++	ctx->debugfs = NULL;
++}
++
++static int jh057n_probe(struct mipi_dsi_device *dsi)
++{
++	struct device *dev = &dsi->dev;
++	struct jh057n *ctx;
++	int ret;
++
++	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
++	if (!ctx)
++		return -ENOMEM;
++
++	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
++	if (IS_ERR(ctx->reset_gpio)) {
++		DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
++		return PTR_ERR(ctx->reset_gpio);
++	}
++
++	mipi_dsi_set_drvdata(dsi, ctx);
++
++	ctx->dev = dev;
++
++	dsi->lanes = 4;
++	dsi->format = MIPI_DSI_FMT_RGB888;
++	dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
++		MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
++
++	ctx->vcc = devm_regulator_get(dev, "vcc");
++	if (IS_ERR(ctx->vcc)) {
++		ret = PTR_ERR(ctx->vcc);
++		if (ret != -EPROBE_DEFER)
++			DRM_DEV_ERROR(dev,
++				      "Failed to request vcc regulator: %d\n",
++				      ret);
++		return ret;
++	}
++	ctx->iovcc = devm_regulator_get(dev, "iovcc");
++	if (IS_ERR(ctx->iovcc)) {
++		ret = PTR_ERR(ctx->iovcc);
++		if (ret != -EPROBE_DEFER)
++			DRM_DEV_ERROR(dev,
++				      "Failed to request iovcc regulator: %d\n",
++				      ret);
++		return ret;
++	}
++
++	drm_panel_init(&ctx->panel, dev, &jh057n_drm_funcs,
++		       DRM_MODE_CONNECTOR_DSI);
++
++	ret = drm_panel_of_backlight(&ctx->panel);
++	if (ret)
++		return ret;
++
++	drm_panel_add(&ctx->panel);
++
++	ret = mipi_dsi_attach(dsi);
++	if (ret < 0) {
++		DRM_DEV_ERROR(dev,
++			      "mipi_dsi_attach failed (%d). Is host ready?\n",
++			      ret);
++		drm_panel_remove(&ctx->panel);
++		return ret;
++	}
++
++	DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
++		     default_mode.hdisplay, default_mode.vdisplay,
++		     default_mode.vrefresh,
++		     mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
++
++	jh057n_debugfs_init(ctx);
++	return 0;
++}
++
++static void jh057n_shutdown(struct mipi_dsi_device *dsi)
++{
++	struct jh057n *ctx = mipi_dsi_get_drvdata(dsi);
++	int ret;
++
++	ret = drm_panel_unprepare(&ctx->panel);
++	if (ret < 0)
++		DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
++			      ret);
++
++	ret = drm_panel_disable(&ctx->panel);
++	if (ret < 0)
++		DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
++			      ret);
++}
++
++static int jh057n_remove(struct mipi_dsi_device *dsi)
++{
++	struct jh057n *ctx = mipi_dsi_get_drvdata(dsi);
++	int ret;
++
++	jh057n_shutdown(dsi);
++
++	ret = mipi_dsi_detach(dsi);
++	if (ret < 0)
++		DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
++			      ret);
++
++	drm_panel_remove(&ctx->panel);
++
++	jh057n_debugfs_remove(ctx);
++
++	return 0;
++}
++
++static const struct of_device_id jh057n_of_match[] = {
++	{ .compatible = "rocktech,jh057n00900" },
++	{ /* sentinel */ }
++};
++MODULE_DEVICE_TABLE(of, jh057n_of_match);
++
++static struct mipi_dsi_driver jh057n_driver = {
++	.probe	= jh057n_probe,
++	.remove = jh057n_remove,
++	.shutdown = jh057n_shutdown,
++	.driver = {
++		.name = DRV_NAME,
++		.of_match_table = jh057n_of_match,
++	},
++};
++module_mipi_dsi_driver(jh057n_driver);
++
++MODULE_AUTHOR("Guido Günther <agx@sigxcpu.org>");
++MODULE_DESCRIPTION("DRM driver for Rocktech JH057N00900 MIPI DSI panel");
++MODULE_LICENSE("GPL v2");
+-- 
+2.26.2
+