kernel-5.8.0-0.rc5.1

* Mon Jul 13 2020 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.8.0-0.rc5.1]
- v5.8-rc5 rebase
- arm64: dts: sun50i-a64-pinephone: Add touchscreen support (Ondrej Jirman)
- arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone (Icenowy Zheng)
- drm/panel: st7703: Assert reset prior to powering down the regulators (Ondrej Jirman)
- drm/panel: st7703: Enter sleep after display off (Ondrej Jirman)
- drm/panel: st7703: Add support for Xingbangda XBD599 (Ondrej Jirman)
- drm/panel: st7703: Move generic part of init sequence to enable callback (Ondrej Jirman)
- drm/panel: st7703: Move code specific to jh057n closer together (Ondrej Jirman)
- drm/panel: st7703: Prepare for supporting multiple panels (Ondrej Jirman)
- drm/panel: st7703: Rename functions from jh057n prefix to st7703 (Ondrej Jirman)
- drm/panel: rocktech-jh057n00900: Rename the driver to st7703 (Ondrej Jirman)
- dt-bindings: panel: Add compatible for Xingbangda XBD599 panel (Ondrej Jirman)
- dt-bindings: panel: Convert rocktech, jh057n00900 to yaml (Ondrej Jirman)
- dt-bindings: vendor-prefixes: Add Xingbangda (Icenowy Zheng)
- Revert "arm64: allwinner: dts: a64: add LCD-related device nodes for PinePhone" (Peter Robinson)
- Revert "drm/sun4i: sun6i_mipi_dsi: fix horizontal timing calculation" (Peter Robinson)
- Revert "drm: panel: add Xingbangda XBD599 panel" (Peter Robinson)
- Revert "dt-bindings: panel: add binding for Xingbangda XBD599 panel" (Peter Robinson)
- selinux: allow reading labels before policy is loaded (Jonathan Lebon)
- Fixes "acpi: prefer booting with ACPI over DTS" to be RHEL only (Peter Robinson)
- Update config for renamed panel driver. (Peter Robinson)
- Enable SERIAL_SC16IS7XX for SPI interfaces (Peter Robinson)
- Updated changelog for the release based on dcde237b9b0e (Fedora Kernel Team)
Resolves: rhbz#

Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>

1 files changed, 46 insertions, 0 deletions

diff --git a/0001-arm64-dts-sun50i-a64-pinephone-Add-touchscreen-suppo.patch b/0001-arm64-dts-sun50i-a64-pinephone-Add-touchscreen-suppo.patch
new file mode 100644
index 000000000..d2511ae64
--- /dev/null
+++ b/0001-arm64-dts-sun50i-a64-pinephone-Add-touchscreen-suppo.patch
@@ -0,0 +1,46 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Ondrej Jirman <megous@megous.com>
+Date: Fri, 26 Jun 2020 02:56:01 +0200
+Subject: [PATCH] arm64: dts: sun50i-a64-pinephone: Add touchscreen support
+
+Pinephone has a Goodix GT917S capacitive touchscreen controller on
+I2C0 bus. Add support for it.
+
+Signed-off-by: Ondrej Jirman <megous@megous.com>
+---
+ .../dts/allwinner/sun50i-a64-pinephone.dtsi   | 19 +++++++++++++++++++
+ 1 file changed, 19 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+index 85a7aa5efd32..2d5694446d17 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+@@ -123,6 +123,25 @@ &ehci1 {
+ 	status = "okay";
+ };
+
++&i2c0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&i2c0_pins>;
++	status = "okay";
++
++	touchscreen@5d {
++		compatible = "goodix,gt917s", "goodix,gt911";
++		reg = <0x5d>;
++		interrupt-parent = <&pio>;
++		interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
++		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
++		reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
++		AVDD28-supply = <&reg_ldo_io0>;
++		VDDIO-supply = <&reg_ldo_io0>;
++		touchscreen-size-x = <720>;
++		touchscreen-size-y = <1440>;
++	};
++};
++
+ &i2c1 {
+ 	status = "okay";
+
+-- 
+2.26.2
+