kernel-5.7.0-0.rc2.20200423git7adc4b399952.1

* Thu Apr 23 2020 CKI@GitLab <cki-project@redhat.com> [5.7.0-0.rc2.20200423git7adc4b399952.1]
- 7adc4b399952 rebase
- Match template format in kernel.spec.template ("Justin M. Forbes")
- Break out the Patches into individual files for dist-git ("Justin M. Forbes")
- Break the Red Hat patch into individual commits (Jeremy Cline)
- Adjust module filtering so CONFIG_DRM_DP_CEC can be set (Jeremy Cline)
- Add a script to generate release tags and branches (Jeremy Cline)
- Set CONFIG_VDPA for fedora ("Justin M. Forbes")
- Provide defaults in ark-rebase-patches.sh (Jeremy Cline)
- Default ark-rebase-patches.sh to not report issues (Jeremy Cline)
Resolves: rhbz#

Signed-off-by: Jeremy Cline <jcline@redhat.com>

1 files changed, 89 insertions, 0 deletions

diff --git a/0001-ahci-thunderx2-Fix-for-errata-that-affects-stop-engi.patch b/0001-ahci-thunderx2-Fix-for-errata-that-affects-stop-engi.patch
new file mode 100644
index 000000000..b43284587
--- /dev/null
+++ b/0001-ahci-thunderx2-Fix-for-errata-that-affects-stop-engi.patch
@@ -0,0 +1,89 @@
+From 432b67a05003234c7b1db6a2355c6cff546e29d8 Mon Sep 17 00:00:00 2001
+From: Robert Richter <rrichter@redhat.com>
+Date: Thu, 7 Jun 2018 22:59:33 -0400
+Subject: [PATCH] ahci: thunderx2: Fix for errata that affects stop engine
+
+Message-id: <1528412373-19128-3-git-send-email-rrichter@redhat.com>
+Patchwork-id: 220952
+O-Subject: [RHEL-8.0 BZ 1563590 v2 2/2] ahci: thunderx2: Fix for errata that affects stop engine
+Bugzilla: 1563590
+RH-Acked-by: Dean Nelson <dnelson@redhat.com>
+RH-Acked-by: Mark Langsdorf <mlangsdo@redhat.com>
+RH-Acked-by: Mark Salter <msalter@redhat.com>
+
+From: Jayachandran C <jnair@caviumnetworks.com>
+
+Apply workaround for this errata:
+  Synopsis: Resetting PxCMD.ST may hang the SATA device
+
+  Description: An internal ping-pong buffer state is not reset
+  correctly for an PxCMD.ST=0 command for a SATA channel. This
+  may cause the SATA interface to hang when a PxCMD.ST=0 command
+  is received.
+
+  Workaround: A SATA_BIU_CORE_ENABLE.sw_init_bsi must be asserted
+  by the driver whenever the PxCMD.ST needs to be de-asserted. This
+  will reset both the ports. So, it may not always work in a 2
+  channel SATA system.
+
+  Resolution: Fix in B0.
+
+Add the code to ahci_stop_engine() to do this. It is not easy to
+stop the other "port" since it is associated with a different AHCI
+interface. Please note that with this fix, SATA reset does not
+hang any more, but it can cause failures on the other interface
+if that is in active use.
+
+Unfortunately, we have nothing other the the CPU ID to check if the
+SATA block has this issue.
+
+RHEL-only:
+
+Both patches are in RHEL-7.6 also. Inclusion of the patches into RHEL-8
+was discussed. Since there are partners with Ax system configurations it
+was decided to carry them in RHEL8 too. See:
+
+ https://bugzilla.redhat.com/show_bug.cgi?id=1563590#c1
+
+[v3 with new delays]
+Signed-off-by: Jayachandran C <jnair@caviumnetworks.com>
+
+Upstream Status: RHEL only
+Signed-off-by: Robert Richter <rrichter@redhat.com>
+Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
+---
+ drivers/ata/libahci.c | 18 ++++++++++++++++++
+ 1 file changed, 18 insertions(+)
+
+diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
+index ea5bf5f4cbed..71c55cae27ac 100644
+--- a/drivers/ata/libahci.c
++++ b/drivers/ata/libahci.c
+@@ -666,6 +666,24 @@ int ahci_stop_engine(struct ata_port *ap)
+ 	tmp &= ~PORT_CMD_START;
+ 	writel(tmp, port_mmio + PORT_CMD);
+ 
++#ifdef CONFIG_ARM64
++	/* Rev Ax of Cavium CN99XX needs a hack for port stop */
++	if (dev_is_pci(ap->host->dev) &&
++	    to_pci_dev(ap->host->dev)->vendor == 0x14e4 &&
++	    to_pci_dev(ap->host->dev)->device == 0x9027 &&
++	    midr_is_cpu_model_range(read_cpuid_id(),
++			MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_VULCAN),
++			MIDR_CPU_VAR_REV(0, 0),
++			MIDR_CPU_VAR_REV(0, MIDR_REVISION_MASK))) {
++		tmp = readl(hpriv->mmio + 0x8000);
++		udelay(100);
++		writel(tmp | (1 << 26), hpriv->mmio + 0x8000);
++		udelay(100);
++		writel(tmp & ~(1 << 26), hpriv->mmio + 0x8000);
++		dev_warn(ap->host->dev, "CN99XX SATA reset workaround applied\n");
++	}
++#endif
++
+ 	/* wait for engine to stop. This could be as long as 500 msec */
+ 	tmp = ata_wait_register(ap, port_mmio + PORT_CMD,
+ 				PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
+-- 
+2.26.0
+