2007-03-18 Martin Hunt * symbols.c (get_sections): Filter out .gnu.linkonce.* sections except for .gnu.linkonce.this_module. 2007-03-18 Martin Hunt * staprun.h (VERSION_CMD): Command to use for version check. Changes to support runtime decision on new or old transport. * mainloop.c (init_staprun): Check the kernel version at runtime instead of at compile time. (cleanup_and_exit): Call the correct relayfs close function. (stp_main_loop): Call the correct relayfs init function. * relay.c: Remove ifdef wrapper. File is always compiled and used if the kernel version is appropriate. * relay_old.c: Ditto. 2007-03-14 Martin Hunt * staprun.c: Renamed from stpd.c. Removed quiet and print_only options. Added "-x" option as an alias for "-t". Removed "-m" option. Updated arg processing to leave 4 slots for modoptions[]. Bump the priority of staprun. * ctl.c: New. Transport control channel functions. * relay.c: New. Relayfs control functions for new transport. * relay_old.c: New. Relayfs control functions for older versions of relayfs. * mainloop.c: New. Staprun main loop. * staprun.h: Renamed from librelay.h. Cleaned up. * stap_merge.c: Renamed. Updated for modified save format. 2006-12-11 Martin Hunt * symbols.c (get_sections): Set buffer sizes to large enough sizes to hold all possible values, but also include checks in case we are wrong. 2006-11-15 Martin Hunt * symbols.c (do_kernel_symbols): Add sizeof(long) to sym_base to preserve 64-bit alignment. 2006-11-09 Martin Hunt * librelay.c: Change all references to transport messages to use the new names with "_stp" prefix. (stp_main_loop): For STP_SYMBOLS, check pointer size and endianess to confirm staprun is compatible with the kernel. * librelay.h: Move a bunch of common includes here. * stpd.c: Cleanup includes. * symbols.c: Ditto. 2006-11-02 Martin Hunt * symbols.c: New file. Sends symbol and module information to the systemtap module. * librelay.c (stp_main_loop): Add STP_MODULE and STP_SYMBOLS message handling. * librelay.h: Add some new function prototypes. * Makefile (CFLAGS): Set to be the same as for building modules. Added symbols.c to sources. 2006-10-10 Tom Zanussi * librelay.c (merge_output): Add check for min when writing output, otherwise last write happens twice. 2006-09-26 David Smith * Makefile: Changed 'stpd' references to 'staprun'. * librelay.c: Ditto. * stpd.c: Ditto. 2006-09-25 Tom Zanussi * librelay.c (kill_percpu_threads): Remove printf. (wait_for_percpu_threads): New. (process_subbufs): Remove processing, processing_mutex, exit thread if exiting flag set. (read_last_buffers): Removed. (cleanup_and_exit): Remove call to read_last_buffers, wait for threads to read flushed buffers instead. (stp_main_loop): Remove mutex init. 2006-09-22 Tom Zanussi * librelay.c (init_relayfs): Cleanup if stp_check fails. 2006-09-19 Tom Zanussi * librelay.c (init_relayfs): Add debugfs path to relay files and add new systemtap directory to path. (init_stp): rmmod module on failure. (merge_output): Remove debugging printfs left in code. (close_relay_files): Clear relay_file descriptor after close. (cleanup_and_exit): Allow cleanup and exit even if there was an error opening relay files. (stp_main_loop): Call cleanup_and_exit() if init_relayfs() fails. 2006-09-18 Martin Hunt * stpd.c (usage): Remove "-m" option. (main): Print warning if "-m" is used. * librelay.c (merge_output): Rewrite to handle new format that support binary. (stp_main_loop): Read merge option from the transport info message. 2006-09-13 Martin Hunt * librelay.c (init_relayfs): Exec stp_check and find relay_filebase. * librelay.h (stp_main_loop): Fix declaration of init_stp(). * stpd.c (usage): Remove "-r" option. (main): Don't find stpd_filebase and don't send it to init_stp(). 2006-08-02 Tom Zanussi * stpd.c (main): Use modname rather than driver_pid in stpd_filebase. 2006-07-20 Martin Hunt * librelay.c (stp_main_loop): If module doesn't start, kill any target command. 2006-06-23 Tom Zanussi * librelay.c (cleanup_and_exit): Close relay files even if not merging. 2006-06-13 Martin Hunt * librelay.c (start_cmd): Rewrite using sigwait() to eliminate a race. 2006-05-18 Martin Hunt * librelay.c (stp_main_loop): Set output to always be line buffered. 2006-04-08 Martin Hunt * librelay.c (stp_main_loop): Write with fwrite() instead of fputs() so we can write binary data. 2006-04-05 Martin Hunt * librelay.c (merge_output): Remove ANSI codes and write warning to stderr. 2006-04-05 Martin Hunt * librelay.c (merge_output): Set the output filename if necessary. (merge_output): * stpd.c (main): Don't reset output_filename just because relayfs is possible. Move that code to librelay.c. 2006-04-04 Roland McGrath * stpd.c (main): Cast f_type when comparing; type differs by machine. 2006-04-04 Tom Zanussi * stpd.c (main): Check that /mnt/relay is actually relayfs. 2006-03-15 Tom Zanussi * stpd.c (main): Add runtime check for relayfs vs relay-on-proc. 2006-03-06 Martin Hunt * librelay.c (start_cmd): Set proper uid/gid before execing command. (system_cmd): New function. (cleanup_and_exit): Wait for any child processes to complete. (stp_main_loop): Recognize STP_SYSTEM message. * stpd.c (main): Add support for "-u username". 2006-02-25 Martin Hunt * librelay.c (init_stp): Better error handling and cleanup. 2006-02-23 Frank Ch. Eigler PR 1304 * stpd.c (mdooptions): New array. (main): Populate it with leftover arguments. * librelay.c (init_stp): Pass it to execve(). 2005-12-08 Frank Ch. Eigler PR 1937 * stpd.c (main): Support new "-d" option. (usage): Document it. * librelay.c (driver_poll): New function to react to death of driver process. (stp_main_loop): Call it if "-d PID" given. Treat SIGHUP like others. 2005-10-19 Tom Zanussi * librelay.c: Move output_file var to stpd.c. (stp_main_loop): If the output_file option was specified, and streaming mode is being used, send output to the file instead of stdout. If !streaming, send output to the file instead of probe.out. * stpd.c (usage): Add comment for -o option. (main): Add -o option. 2005-10-19 Tom Zanussi * librelay.c (merge_output): Switch to binary TIMESTAMP. * stp_dump.c (main): Switch to binary TIMESTAMP. * stp_merge.c (main): Switch to binary TIMESTAMP. 2005-10-14 Tom Zanussi PR 1476 * librelay.c: Add flag for buffer processing. (reader_thread): Disable/enable cancel state around buffer processing, and update flag to show we're busy processing. (cleanup_and_exit): Wait for any threads busy processing. (stp_main_loop): Initialize processing mutex. 2005-09-06 Martin Hunt * librelay.c: Remove all USE_PROCFS ifdefs. (sig_usr): Signal handler for SIGUSR1. (start_cmd): New function to handle "-c" option, forks() off a new process then waits for SIGUSR1 to exec it. (init_stp): Call start_cmd(). (stp_main_loop): Set a signal handler for SIGCHLD. * stpd.c (main): Add "-t" and "-c" options. (usage): Update with new options. 2005-08-29 Martin Hunt * stpd.c main): Add enable_relayfs flag. Turn it off with "-r". 2005-08-24 Martin Hunt * librelay.c (sigproc): Removed the "Exiting..." message for now. 2005-08-24 Martin Hunt * librelay.c (sigproc): Reestablish signal handler so impatient people don't hit ^C twice and terminate the program before it saves the data and removes the module. Also print a message to stderr that it is exiting. (stp_main_loop): Write OOB data (warnings, errors, etc) to stderr instead of stdout. * librelay.h: Write debug info to stderr. * Makefile: add librelay.h to dependencies. 2005-08-23 Martin Hunt * librelay.c (merge_output): Don't add an extra \n. 2005-08-23 Martin Hunt * librelay.c (read_last_buffers): New function. Directly grab the last buffers. (info_pending): Deleted. (request_last_buffers): Deleted. 2005-08-22 Martin Hunt * Makefile (debug): Add debug target. * librelay.h (dbug): Define. * librelay.c: Enable some dbug lines. 2005-08-19 Martin Hunt * librelay.c (reader_thread): Check the return value for write(). 2005-08-19 Frank Ch. Eigler * librelay.c (modpath): New global. Use it for insmod only. * stpd.c (main): Set both modpath and modname, to support modules specified by full path name. 2005-08-19 Martin Hunt * stpd.c (main): Simplify buffer size code. * librelay.c: Major changes to support procfs instead of netlink. 2005-08-03 Tom Zanussi * librelay.c: Track subbuf info requests/replies so we know unequivocally when it's ok to do final processing. (reader_thread): Remove buffer-full warning. 2005-08-03 Martin Hunt * librelay.c (init_stp): Change variable name to eliminate shadow warning. 2005-08-03 Martin Hunt * librelay.c (open_control_channel): Set the receive buffer to 512K, or the max allowed. * stpd.c: Remove "-n" subbug option and change "-b" option so you can specify buffering in different ways. Add a verbose option. Exec the "stp_check" script. 2005-08-01 Frank Ch. Eigler * librelay.c: Correct fwrite api usage. * all: Correct copyright holder name. 2005-08-01 Martin Hunt * librelay.h: Get structs and enums from ../transport/transport_msgs.h to eliminate duplication. * librelay.c (send_request): Retry if send fails. (open_relayfs_files): Use fopen() instead of open() for the percpu tmpfiles. (request_last_buffers): Just send cpu number for STP_BUF_INFO request. (reader_thread): Ditto. (process_subbufs): Use fwrite_unlocked() instead of write(). (sigchld): Removed. (init_stp): Go back to using system() instead of fork and exec to load module. When done, send a TRANSPORT_INFO request. (cleanup_and_exit): Change parameter to simple flag to indicate if the module needs removing. (sigproc): Remove complicated logic and just send STP_EXIT. (stp_main_loop): When receiving STP_TRANSPORT_INFO, set the local params and reply with a STP_START. When receiving STP_START, there was an error, so cleanup and exit. * stpd.c (main): Added new options to set number of buffers and their size. 2005-07-29 Roland McGrath * librelay.c (process_subbufs): Use unsigned for I. (sigproc): Add __attribute__((unused)) on parameter. (sigchld): Likewise. Avoid shadowing global variable name. (stp_main_loop): Add a cast. 2005-07-18 Martin Hunt * stp_merge.c (main): Fix dropped count calculation. 2005-07-14 Tom Zanussi * librelay.c (reader_thread): Add missing pthread_mutex_lock 2005-07-14 Frank Ch. Eigler * stpd.c (main): Pass !quiet mode to init_stp(). * librelay.c (init_relayfs): Be quiet if !print_totals. 2005-07-13 Martin Hunt * stpd.c (usage): Fix usage string. * librelay.c (init_stp): Change last arg to NULL, not 0. 2005-07-08 Martin Hunt * librelay.c (sigchld): Signal handler to detect completion of module loading. (init_stp): Use fork/exec instead of system() so we can get async signal of module load success/failure. (cleanup_and_exit): New function. (sigproc): If module is not loaded, don't send message to it. (stp_main_loop): Call cleanup_and_exit() when STP_EXIT is received. Don't send a request for the transport mode. The module will send notification to the daemon when it is ready. * stpd.c (main): Don't print message until module is loaded. 2005-07-01 Martin Hunt * librelay.c: Removed the color coding of cpu output. 2005-06-28 Martin Hunt * librelay.c (merge_output): Use unlocked stdio to improve speed. * stp_merge.c: New file. * Makefile: Add stp_merge. 2005-06-27 Martin Hunt * stpd.c (main): Add new command line arg, "-m" to disable the per-cpu merging. * librelay.c (merge_output): Replacement for sort_output(). Efficiently merges per-cpu streams. 2005-06-20 Tom Zanussi * librelay.c: Large refactoring, important changes are added transport_mode command, for relayfs transport display results only when probe completes and/or write output file, merge, sort and delete the per-cpu files in postprocessing, refactor so that relayfs files aren't created until transport command received, removed sigalrm, read the final subbuffers on exit * stpd.c: Remove all command-line args except for -p and -q as well as all code related to buffer sizes. * librelay.h: Add transport mode command and struct. 2005-05-16 Martin Hunt * librelay.c (sigproc): If STP_EXIT send fails, keep retrying every 10ms. (init_stp): Don't set n_subbufs and subbuf_size params.