For the most part, SystemTap scripts are the foundation of each SystemTap session. SystemTap scripts instruct SystemTap on what type of information to collect, and what to do once that information is collected. As stated in , SystemTap scripts are made up of two components: events and handlers. Once a SystemTap session is underway, SystemTap monitors the operating system for the specified events and executes the handlers as they occur. An event and its corresponding handler is collectively called a probe. A SystemTap script can have multiple probes. A probe's handler is commonly referred to as a probe body. In terms of application development, using events and handlers is similar to instrumenting the code by inserting diagnostic print statements in a program's sequence of commands. These diagnostic print statements allow you to view a history of commands executed once the program is run. SystemTap scripts allow insertion of the instrumentation code without recompilation of the code and allows more flexibility with regard to handlers. Events serve as the triggers for handlers to run; handlers can be specified to record specified data and print it in a certain manner. SystemTap scripts use the file extension .stp, and are conatains probes written in the following format: probe event {statements} SystemTap supports multiple events per probe; multiple events are delimited by a comma (,). If multiple events are specified in a single probe, SystemTap will execute the handler when any of the specified events occur. Each probe has a corresponding statement block. This statement block is enclosed in braces ({ }) and contains the handlers to be executed per event. SystemTap executes these handlers (i.e. "statements") in sequence; special separators or terminators are generally not necessary between multiple handlers. Statement blocks in SystemTap scripts follow the same syntax and semantics as the C programming language. A statement block can also nest another statement block, although for the most part this is used only to organize code in the script for the benefit of the administrator. Systemtap allows you to write functions to factor out code to be used by a number of probes. Thus, rather than repeatedly writing the same series of statements in multiple probes, you can just place the instructions in a function, as in: function function_name(arguments) {statements} probe event {function_name(arguments)} The statements in function_name are executed when the probe for event executes. The arguments are optional values passed into the function. is designed to introduce readers to the basics of SystemTap scripts. To understand SystemTap scripts better, it is advisable that you refer to ; each section therein provides a detailed explanation of the script, its events, handlers, and expected output.

SystemTap events can be broadly classified into two types: synchronous and asynchronous. A synchronous event occurs when any process executes an instruction that references a particular location in kernel code. This gives other events a reference point from which more contextual data may be available. Examples of synchronous events include: syscall.system_call The entry to the system call system_call. If the exit from a syscall is desired, appending a .return to the event monitor the exit of the system call instead. For example, to specify the entry and exit of the system call close, use syscall.close and syscall.close.return respectively. vfs.file_op The entry to the file_op event for Virtual File System (VFS). Similar to syscall event, appending a .return to the event monitors the exit of the file_op operation. kernel.function("function") The entry to the kernel function function. For example, kernel.function("sys_open") refers to the "event" that occurs when the kernel function sys_open is called by any thread in the system. To specify the return of the kernel function sys_open, append the return string to the event statement; i.e. kernel.function("sys_open").return. When defining functions, you can use asterisk (*) for wildcards. You can also trace the entry or exit of a function in a kernel source file. Consider the following example: probe kernel.function("*@net/socket.c") { } probe kernel.function("*@net/socket.c").return { } Wild cards also work for other things, e.g. syscall.* In the previous example, the first probe's event specifies the entry of ALL functions in the kernel source file net/socket.c. The second probe specifies the exit of all those functions. Note that in this example, no handler was specified; as such, no information will be displayed. module("module").function("function") Allows you to probe functions within modules. For example: probe module("ext3").function("*") { } probe module("ext3").function("*").return { } The first probe in points to the entry of all functions for the ext3 module. The second probe points to the exits of all entries for that same module; the use of the .return suffix is similar to kernel.function(). Note that the probes in also do not contain probe bodies, and as such will not print any useful data (as in ). A system's loaded modules are typically located in /lib/modules/kernel version, where kernel version refers to the currently loaded kernel. Modules use the filename extension .ko. Asynchronous events are not tied to a particular instruction or location in code. This family of probe points consists mainly of counters, timers, and similar constructs. Examples of asynchronous events include: begin The startup of a SystemTap session; i.e. as soon as the SystemTap script is run. end The end of a SystemTap session. timer events An event that specifies a handler to be executed every specified period of time. For example: probe timer.s(4) { printf("hello world\n") } is an example of a probe that prints hello world every 4 seconds. Note that you can also use the following timer events: timer.ms(milliseconds) timer.us(microseconds) timer.ns(nanoseconds) timer.hz(hertz) timer.jiffies(jiffies) When used in conjunction with other probes that collect information, timer events allows you to print out get periodic updates and see how that information changes over time. SystemTap supports the use of a large collection of probe events. For more information about supported events, refer to man stapprobes. The SEE ALSO section of man stapprobes also contains links to other man pages that discuss supported events for specific subsystems and components. is reference appropriate? too advanced for readers (it seems so to me)? please advise.

Consider the following sample script: probe begin { printf ("hello world\n") exit () } In , the event begin (i.e. the start of the session) triggers the handler enclosed in { }, which simply prints hello world, then exits. SystemTap scripts continue to run until the exit() function executes. If the users wants to stop the execution of the script, it can interrupted manually with CtrlC. The printf () statement is one of the simplest functions for printing data. printf () can also be used to display data using a wide variety of SystemTap functions in the following format: printf ("format string\n", argument) The format string specifies how argument should be printed. The format string of simply instructs SystemTap to print hello world, and contains no format specifiers. You can use the format specifiers %s (for strings) and %d (for numbers) in format strings, depending on your list of arguments. Format strings can have multiple format specifiers, each matching a corresponding argument; multiple arguments are delimited by a comma (,). Semantically, the SystemTap printf function is very similar to its C language counterpart. The aforementioned syntax and format for SystemTap's printf function is identical to that of the C-style printf. To illustrate this, consider the following probe example: probe syscall.open { printf ("%s(%d) open\n", execname(), pid()) } instructs SystemTap to probe all entries to the system call open; for each event, it prints the current execname() (which is a string) and pid() (which is a number), followed by the word open. A snippet of this probe's output would look like: editorial review: does a clarification that "format specifier1" is to "argument1", "format specifier2" is to "argument2", or is this clear enough? vmware-guestd(2206) open hald(2360) open hald(2360) open hald(2360) open df(3433) open df(3433) open df(3433) open hald(2360) open SystemTap supports a wide variety of functions that can be used as printf () arguments. uses the SystemTap functions execname() (name of the process that called a kernel function/performed a system call) and pid() (current process ID). is "handler function" an appropriate term? wcohen: use "SystemTap functions" to match up language in man pages The following is a list of commonly-used SystemTap functions: tid() The ID of the current thread. uid() The ID of the current user. cpu() The current CPU number. gettimeofday_s() The number of seconds since UNIX epoch (January 1, 1970). pp() A string describing the probe point currently being handled. thread_indent() This particular function is quite useful, providing you with a way to better organize your print results. When used with an indentation parameter (for example, -1), it allows the probe to internally store an "indentation counter" for each thread (identified by ID, as in tid). It then returns a string with some generic trace data along with an appropriate number of indentation spaces. The generic data included in the returned string includes a timestamp (number of microseconds since the most recent initial indentation), a process name, and the thread ID. This allows you to identify what functions were called, who called them, and the duration of each function call. If call entries and exits immediately precede each other, it is easy to match them. However, in most cases, after a first function call entry is made several other call entries and exits may be made before the first call exits. The indentation counter helps you match an entry with its corresponding exit by indenting the next function call if it is not the exit of the previous one. Consider the following example on the use of thread_indent(): probe kernel.function("*@net/socket.c") { printf ("%s -> %s\n", thread_indent(1), probefunc()) } probe kernel.function("*@net/socket.c").return { printf ("%s <- %s\n", thread_indent(-1), probefunc()) } prints out the thread_indent() and probe functions at each event in the following format: 0 ftp(7223): -> sys_socketcall 1159 ftp(7223): -> sys_socket 2173 ftp(7223): -> __sock_create 2286 ftp(7223): -> sock_alloc_inode 2737 ftp(7223): <- sock_alloc_inode 3349 ftp(7223): -> sock_alloc 3389 ftp(7223): <- sock_alloc 3417 ftp(7223): <- __sock_create 4117 ftp(7223): -> sock_create 4160 ftp(7223): <- sock_create 4301 ftp(7223): -> sock_map_fd 4644 ftp(7223): -> sock_map_file 4699 ftp(7223): <- sock_map_file 4715 ftp(7223): <- sock_map_fd 4732 ftp(7223): <- sys_socket 4775 ftp(7223): <- sys_socketcall remember to add a reference later to "tapsets" from here, to clarify that thread_indent is defined in tapsets as a special function of sorts name Identifies the name of a specific system call. This function can only be used in probes that use the event syscall.system_call. target() Used in conjunction with stap script -x process ID or stap script -c command. If you want to specify a script to take an argument of a process ID or command, use target() as the variable in the script to refer to it. For example: probe syscall.* { if (pid() == target()) printf("%s/n", name) } When is run with the argument -x process ID, it watches all system calls (as specified by the event syscall.*) and prints out the name of all system calls made by the specified process. This has the same effect as specifying if (pid() == process ID) each time you wish to target a specific process. However, using target() makes it easier for you to re-use the script, giving you the ability to simply pass a process ID as an argument each time you wish to run the script (e.g. stap targetexample.stp -x process ID). For more information about supported SystemTap functions, refer to man stapfuncs. will need a complete listing of supported handler functions? also, SystemTap function descriptions seem ambiguous, please advise.