diff options
Diffstat (limited to 'runtime/staprun/ChangeLog')
| -rw-r--r-- | runtime/staprun/ChangeLog | 910 |
1 files changed, 0 insertions, 910 deletions
diff --git a/runtime/staprun/ChangeLog b/runtime/staprun/ChangeLog deleted file mode 100644 index 4a483b3e..00000000 --- a/runtime/staprun/ChangeLog +++ /dev/null @@ -1,910 +0,0 @@ -2009-01-28 David Smith <dsmith@redhat.com> - - PR9788 - * mainloop.c (cleanup_and_exit): Added workaround for bug 9788 by - fork'ing/exec'ing staprun. - -2008-01-11 Mark Wielaard <mjw@redhat.com> - - * staprun.h: include config.h for dependency. - -2008-12-08 Frank Ch. Eigler <fche@elastic.org> - - PR7062 - * staprun.c (enable_uprobes): Find uprobes.ko based on - SYSTEMTAP_RUNTIME. - (main): Unset SYSTEMTAP_* environment vars if setuid. - -2008-12-03 Roland McGrath <roland@redhat.com> - - PR7063 - * staprun.c (main): Use $SYSTEMTAP_STAPIO instead of hard-coded path. - Remove SYSTEMTAP_STAPRUN and SYSTEMTAP_STAPIO - environment variables when setuid is in effect. - * mainloop.c (cleanup_and_exit): Use $SYSTEMTAP_STAPRUN to re-exec, - not hard-coded path. - -2008-12-03 Frank Ch. Eigler <fche@elastic.org> - - PR6925 - * staprun (init_staprun): If a stap_* module load fails, try - to unload possible leftover, and try again. - -2008-11-28 Frank Ch. Eigler <fche@elastic.org> - - PR4783 - * staprun.c (remove_module): Don't reset with setpriority(0), - as we never set it to high-priority any more anyway. - * mainloop.c (system_cmd): Ditto. - -2008-11-12 Frank Ch. Eigler <fche@elastic.org> - - PR6964 redux. - * mainloop (WORKAROUND_BZ467568): New macro to control - behavior. - (start_cmd, stp_main_loop): Use signal/pause-based - synchronization as a fallback for rhbz 467568. - -2008-10-28 Frank Ch. Eigler <fche@elastic.org> - - PR6964, from Wenji Huang <wenji.huang@oracle.com>: - * mainloop.c (start_cmd, stp_main_loop): Temporarily - disable ptrace calls. - -2008-10-15 Frank Ch. Eigler <fche@elastic.org> - - * mainloop.c (start_cmd): Fix wordexp error handling. - -2008-09-18 David Smith <dsmith@redhat.com> - - PR 6903. - * staprun_funcs.c (check_permissions): Instead of checking the - effective uid, check the real uid for root permissions. - -2008-09-06 Frank Ch. Eigler <fche@elastic.org> - - * mainloop.c (start_cmd): Rewrite to use wordexp/execvp/ptrace. - (stp_main_loop): Use ptrace detach to resume target process. - -2008-09-05 Frank Ch. Eigler <fche@elastic.org> - - * staprun.c (run_as): Teach it to exec too. Update callers. - Always do set[ug]id as dictated. - * staprun.h (do_cap): Remove. Update all callers. - * staprun_funcs.c: Ditto. - * cap.c: Removed. Update headers. - -2008-07-10 Frank Ch. Eigler <fche@elastic.org> - - PR 6736. - * common.c (send_request): Move here ... - * mainloop.c: from here. - * staprun.c (send_relocations): New function to send kernel - and module relocation bases to probe module. - * staprun.h: Corresponding changes. - -2008-06-03 Frank Ch. Eigler <fche@elastic.org> - - PR 6429. - * mainloop.c (stp_main_loop): Remove STP_UNWIND message support. - -2008-05-05 Martin Hunt <hunt@redhat.com> - - * mainloop.c (child_proc): Handle sig_chld - in the proper thread. - (signal_thread): Don't call send_request() - because it isn't thread-safe. - -2008-05-05 Martin Hunt <hunt@redhat.com> - - * mainloop.c (signal_thread): New thread to handle signals - better. - (setup_main_signals): Create signal thread. - -2008-04-30 Masami Hiramatsu <mhiramat@redhat.com> - - PR 6008 - * common.c (parse_args): Increase the limitation of the buffer size - to 4095MB. - * common.c (usage): Ditto. - -2008-04-30 Masami Hiramatsu <mhiramat@redhat.com> - - * stapio.c (main): Fix a typo in a debug message. - * staprun.c (main): Ditto. - -2008-04-24 Frank Ch. Eigler <fche@elastic.org> - - PR 6451. - * common.c (control_channel): Initialize to -1. - * ctl.c (close_ctl_channel): Tolerate fd=0. - -2008-04-22 Martin Hunt <hunt@redhat.com> - - * cap.c (init_cap): Detect capabilities failure and - run with them disabled. - -2008-04-22 Martin Hunt <hunt@redhat.com> - - * mainloop.c (send_request): Move here from common.c - staprun no longer send any messages. - -2008-04-22 hunt <hunt@redhat.com> - - * common.c (usage): Add -d option. - -2008-04-21 Martin Hunt <hunt@redhat.com> - - * staprun.c, stapio.c, staprun.h, mainloop.c, staprun_funcs.c, - ctl.c, common.c: Add "-d" option to have staprun remove - modules. Have staprun exec stapio and then have stapio - exec "staprun -d" to remove the module when finished. - -2008-04-16 Martin Hunt <hunt@redhat.com> - - * ctl.c (init_ctl_channel): Remove unused parameter. - Just opens one channel now. - -2008-02-21 David Smith <dsmith@redhat.com> - - * staprun_funcs.c (check_path): Small security fix. - -2008-01-21 Martin Hunt <hunt@redhat.com> - - * symbols.c (send_module): Simplify and use new send_data() - function to keep longword alignment. - -2008-01-14 Martin Hunt <hunt@redhat.com> - - PR4037 and fixes to better synchronize staprun and stapio. - * symbols.c (send_data): Send header and data seperately, saving - a memcpy and avoiding any alignment issues. - (get_sections): Return -1 on error instead of just exiting - and leaving stapio hanging. Send data in proper format even if kernel - pointers are different size. - (send_module): Return -1 on error instead of just exiting - and leaving stapio hanging. - (do_module): Ditto. - (compar): Removed. - (do_kernel_symbols): Rewrite to be more robust. Return -1 on - error instead of just exiting and leaving stapio hanging. - - * staprun_funcs.c (handle_symbols): Signal stapio if we error out. - Set kernel_ptr_size; - - * staprun.h (kernel_ptr_size): Declare. - - * mainloop.c (stp_main_loop): When ready, send STP_READY. - -2008-01-12 Frank Ch. Eigler <fche@elastic.org> - - PR 5603 horrible hack. - * symbols.c (do_kernel_symbols): Make buf[256] instead of [128]. - -2007-12-11 Martin Hunt <hunt@redhat.com> - PR5368 - * relay_old.c (init_oldrelayfs): Don't start threads - if load_only. - * relay.c (init_relayfs): Ditto. - -2007-11-09 Martin Hunt <hunt@redhat.com> - - * mainloop.c (stp_main_loop): Bump recvbuf to 8196 for - compatibility with old transport. - -2007-10-26 Martin Hunt <hunt@redhat.com> - PR5218 - * stapio.c (main): Set initialized properly when - attached. - -2007-10-12 Martin Hunt <hunt@redhat.com> - Changes to separate the symbols from the command channel. - - * cap.c (init_cap): Add CAP_DAC_OVERRIDE. - * staprun.h: Change init_ctl_channel prototype. - * ctl.c (init_ctl_channel): Modify to open either - a command or symbol channel. Use ".cmd" and ".symbols" - as the new names. - * mainloop.c (init_stapio): Call init_ctl_channel(0); - * staprun.c (cleanup): Call stop_symbol_thread(). - (main): Call start_symbol_thread(). - * staprun_funcs.c (handle_symbols): Make a thread. - (start_symbol_thread): New. - (stop_symbol_thread): New. - -2007-10-11 Frank Ch. Eigler <fche@elastic.org> - - * staprun.c (main): Move checks for init_cap and getuid - from just before command line argument parsing to just after. - -2007-10-09 Martin Hunt <hunt@redhat.com> - - * common.c (set_clexec): New. - * staprun.h: Add prototype for set_clexec. - * relay*.c, ctl.c: Call set_clexec after - file opens. - -2007-09-14 Martin Hunt <hunt@redhat.com> - - * ctl.c (init_ctl_channel): Return 1 if the ctl file opened - was for the old relayfs transport. - - * mainloop.c (init_stapio): Don't call using_old_transport(). - Use the return of init_ctl_channel() instead. - (using_old_transport): Deleted. - -2007-08-31 Martin Hunt <hunt@redhat.com> - - * mainloop.c (start_cmd): Set the priority to - forked processes back to normal. - (system_cmd): Ditto. - -2007-08-21 Martin Hunt <hunt@redhat.com> - - * mainloop.c (start_cmd): Send SIGINT to target_cmd, - not stapio. - -2007-08-20 David Smith <dsmith@redhat.com> - - From Lai Jiangshan <laijs@cn.fujitsu.com> - * common.c (parse_args): Make sure the '-c' and '-x' options can't - be specified together. - -2007-08-15 David Smith <dsmith@redhat.com> - - * staprun.c (main): Quit if effective uid is not root. - -2007-08-15 Martin Hunt <hunt@redhat.com> - PR4736 - * staprun.c (cleanup): Set priority back to normal - before removing module. - -2007-08-15 Martin Hunt <hunt@redhat.com> - - * stap_merge.tcl: New. - -2007-08-14 David Smith <dsmith@redhat.com> - - Merge from setuid-branch. Changes also by Martin Hunt - <hunt@redhat.com>. - - * staprun.c (init_staprun): Drop CAP_SYS_ADMIN when we're done - with it. - (main): Calls parse_modpath instead of path_parse_modname. Just - call parse_modpath with argv[optind]. Let it allocate and set - modpath and modname. If no modulename was given, display usage - and exit. Drop CAP_SYS_NICE when we're done with it. Set - atexit(exit_cleanup) so cleanup always gets called and modules get - removed. Call handle_symbols. - (run_stapio): Set argv[0] to stapio so that it executes as itself - instead of staprun. - (cleanup): Only do cleanups once and only try to remove module - when appropriate. - (exit_cleanup): New. Calls cleanup(). - (mountfs): Sets uid to root before making directory and then - restores uid. - (setup_ctl_channel): Uses DEBUGFS define and improved - error message. - (setup_relayfs): Ditto. - (setup_oldrelayfs): Uses DEBUGFS and RELAYFS defines. - (run_stp_check): Replaced by mountfs(). - (mountfs): New function. Replaces an external script with C code. - (init_staprun): Calls mountfs() instead of run_stp_check(). - - * staprun.h: Renamed path_parse_modname to parse_modpath. Added - MODULE_NAME_LEN define. Added [_][p]err macros. Removed - VERSION_CMD. - - * mainloop.c (cleanup_and_exit): Make sure initialized is 2 - before exiting with code 2. - (stp_main_loop): Set initialized to 2 when STP_TRANSPORT - is received. Call cleanup_and_exit() with proper status. - (start_cmd): exit 1 instead of -1. - (system_cmd): Ditto. - (init_staprun): Renamed init_stapio. - (cleanup_and_exit): Set exit status. - - * cap.c: New file. - * common.c: New file. - * stapio.c: New file. - * staprun_funcs.c: New file. - * Makefile: Removed. - - * symbols.c (get_sections): Move the filter code up so that - uninteresting section names are filtered out before - attempting to open them. - (do_kernel_symbols): Better detect overfow conditions and realloc - new space. - (do_module): After sending all modules, send a null message to - indicate we are finished. - - * ctl.c (init_ctl_channel): When attempting to attach, if the - control channel doesn't exist, print a better error message. - - * relay_old.c (init_oldrelayfs): Errors out if - open_relayfs_files() couldn't open any files. - - PR 4795 - * mainloop.c (send_request): Fixed buffer overflow check. - * staprun.h: Added buffer overflow checking versions of - strcpy/sprintf/snprintf. - * common.c (path_parse_modname): Checks for overflows on - strcpy/sprintf/snprintf. - (read_buffer_info): Ditto. - * ctl.c (init_ctl_channel): Ditto. - * relay.c (init_relayfs): Ditto. - * relay_old.c (open_relayfs_files): Ditto. - (init_oldrelayfs): Ditto. - * staprun_funcs.c (insert_module): Ditto. - (check_path): Ditto. - * symbols.c (get_sections): Ditto. - -2007-07-09 David Smith <dsmith@redhat.com> - - * relay.c (init_relayfs): Fixed a buffer size bug introduced by - the last change. - -2007-07-09 David Smith <dsmith@redhat.com> - - * relay.c (init_relayfs): Make sure buffers are big enough to hold - a full path. - * relay_old.c (init_oldrelayfs): Ditto. - -2007-07-09 David Smith <dsmith@redhat.com> - - * ctl.c (read_buffer_info): Make sure buffer is big enough to hold - a full path. - (init_ctl_channel): Ditto. - -2007-07-02 Martin Hunt <hunt@redhat.com> - - * symbols.c (get_sections): Set data pointer to the lowest address - of any data section. - -2007-06-21 Martin Hunt <hunt@redhat.com> - - * relay.c (init_relayfs): Send message to check for bulkmode. - -2007-06-20 Martin Hunt <hunt@redhat.com> - - * stap_merge.c (main): Add verbose option. Will realloc - buffer if current size is too small. Check return codes - from writes so gcc won't complain. - -2007-06-07 Martin Hunt <hunt@redhat.com> - - * relay_old.c (open_relayfs_files): Add support for - output file names (-o) with bulk (relayfs) mode. - -2007-06-04 Martin Hunt <hunt@redhat.com> - - * mainloop.c (cleanup_and_exit): Disable signals - while exiting. - (fatal_handler): Use return values from write() to - avoid warnings. - -2007-05-24 Martin Hunt <hunt@redhat.com> - - * mainloop.c (cleanup_and_exit): Fix typo. - -2007-05-22 Martin Hunt <hunt@redhat.com> - - * mainloop.c (init_staprun): Change dbug() call. - - * relay.c: Fix ppoll() call and some race conditions involving - signals. - -2007-05-10 Martin Hunt <hunt@redhat.com> - - * relay.c (reader_thread): Set timeout for streaming to - 200ms. - -2007-05-09 Martin Hunt <hunt@redhat.com> - - * relay.c (reader_thread): For bulk mode, set timeout to NULL - so ppoll never times out. - -2007-05-08 Martin Hunt <hunt@redhat.com> - - * relay.c (ppoll): Add a compatibility function for - glibc < 2.4. - -2007-05-08 Martin Hunt <hunt@redhat.com> - Signal handler cleanup. - * mainloop.c (fatal_handler): New. Cleanly handle - unexpected fatal signals. - (setup_main_signals): New. Set signals once mainloop - is entered. - (setup_signals): New. Block certain signals during initialization. - Set handler for fatal signals. - * relay.c (reader_thread): Use ppoll(). Terminate on - SIGUSR2 after reading any remaining data. - (close_relayfs): Remove sleep hack. Send SIGUSR2 to all threads. - - Runtime debug messages. - * staprun.h: Change dbug() to accept a debuglevel and - enable it. - * *.c: Modify dbug() calls. - -2007-05-07 Martin Hunt <hunt@redhat.com> - Patch from David Smith - * mainloop.c (stp_main_loop): Properly handle write() - return value. Fixes build problem with some compilers. - -2007-04-10 Martin Hunt <hunt@redhat.com> - - * relay.c (close_relayfs): Give threads some time to - run before closing. - -2007-04-06 Martin Hunt <hunt@redhat.com> - - * stp_merge.c (main): Remove extra newline in output. - * stap_merge.c: Renamed from stp_merge.c. - * Makefile: Updated. - -2007-04-02 Martin Hunt <hunt@redhat.com> - - * relay_old.c (close_oldrelayfs): If just detaching, call - pthread_cancel. - (open_relayfs_files): Just return 0 if relay_fd[cpu] not opened. - (init_oldrelayfs): Scan percpu files to calculate ncpus. - - * mainloop.c (init_staprun): Call old transport init when necessary. - (cleanup_and_exit): Ignore signals when cleaning up. - - * ctl.c (read_buffer_info): For old transport, need to read transport - parameters. - -2007-03-26 Martin Hunt <hunt@redhat.com> - - * mainloop.c (run_stp_check): Just use system() call. - (init_staprun): Remove _stp_pid module parameter. - (cleanup_and_exit): If closed==2, just exit without removing module. - (driver_poll): Remove. We no longer require stap running. - (_stp_main_loop): Remove call to driver_poll. - - * ctl.c (init_ctl_channel): Don't put files in systemtap_pid, - revert back to systemtap/modulename. - - * relay.c: Revert back to systemtap/modulename paths. - * relay_old.c: Ditto. - - * staprun.c: Add -L and -A args. - -2007-03-20 Martin Hunt <hunt@redhat.com> - - * symbols.c (send_module): If send returns < 0 then - cleanup and exit. - (do_kernel_symbols): Ditto. - -2007-03-18 Martin Hunt <hunt@redhat.com> - * staprun.h (err): Define. - * symbols.c (get_sections): More overflow checking. - -2007-03-18 Martin Hunt <hunt@redhat.com> - * symbols.c (get_sections): Filter out .gnu.linkonce.* sections - except for .gnu.linkonce.this_module. - -2007-03-18 Martin Hunt <hunt@redhat.com> - * staprun.h (VERSION_CMD): Command to use for version check. - Changes to support runtime decision on new or old transport. - * mainloop.c (init_staprun): Check the kernel version at runtime - instead of at compile time. - (cleanup_and_exit): Call the correct relayfs close function. - (stp_main_loop): Call the correct relayfs init function. - * relay.c: Remove ifdef wrapper. File is always compiled and used - if the kernel version is appropriate. - * relay_old.c: Ditto. - -2007-03-14 Martin Hunt <hunt@redhat.com> - - * staprun.c: Renamed from stpd.c. Removed quiet and print_only - options. Added "-x" option as an alias for "-t". Removed "-m" - option. Updated arg processing to leave 4 slots for modoptions[]. - Bump the priority of staprun. - * ctl.c: New. Transport control channel functions. - * relay.c: New. Relayfs control functions for new transport. - * relay_old.c: New. Relayfs control functions for older - versions of relayfs. - * mainloop.c: New. Staprun main loop. - * staprun.h: Renamed from librelay.h. Cleaned up. - - * stap_merge.c: Renamed. Updated for modified save format. - - -2006-12-11 Martin Hunt <hunt@redhat.com> - - * symbols.c (get_sections): Set buffer sizes to large enough - sizes to hold all possible values, but also include checks in case - we are wrong. - -2006-11-15 Martin Hunt <hunt@redhat.com> - - * symbols.c (do_kernel_symbols): Add sizeof(long) to sym_base - to preserve 64-bit alignment. - -2006-11-09 Martin Hunt <hunt@redhat.com> - - * librelay.c: Change all references to transport messages - to use the new names with "_stp" prefix. - (stp_main_loop): For STP_SYMBOLS, check pointer size and - endianess to confirm staprun is compatible with the kernel. - - * librelay.h: Move a bunch of common includes here. - * stpd.c: Cleanup includes. - * symbols.c: Ditto. - -2006-11-02 Martin Hunt <hunt@redhat.com> - - * symbols.c: New file. Sends symbol and module information to - the systemtap module. - - * librelay.c (stp_main_loop): Add STP_MODULE and STP_SYMBOLS - message handling. - - * librelay.h: Add some new function prototypes. - - * Makefile (CFLAGS): Set to be the same as for building modules. - Added symbols.c to sources. - -2006-10-10 Tom Zanussi <zanussi@us.ibm.com> - - * librelay.c (merge_output): Add check for min when writing - output, otherwise last write happens twice. - -2006-09-26 David Smith <dsmith@redhat.com> - - * Makefile: Changed 'stpd' references to 'staprun'. - * librelay.c: Ditto. - * stpd.c: Ditto. - -2006-09-25 Tom Zanussi <zanussi@us.ibm.com> - - * librelay.c (kill_percpu_threads): Remove printf. - (wait_for_percpu_threads): New. - (process_subbufs): Remove processing, processing_mutex, exit - thread if exiting flag set. - (read_last_buffers): Removed. - (cleanup_and_exit): Remove call to read_last_buffers, wait for - threads to read flushed buffers instead. - (stp_main_loop): Remove mutex init. - -2006-09-22 Tom Zanussi <zanussi@us.ibm.com> - - * librelay.c (init_relayfs): Cleanup if stp_check fails. - -2006-09-19 Tom Zanussi <zanussi@us.ibm.com> - - * librelay.c (init_relayfs): Add debugfs path to relay files and - add new systemtap directory to path. - (init_stp): rmmod module on failure. - (merge_output): Remove debugging printfs left in code. - (close_relay_files): Clear relay_file descriptor after close. - (cleanup_and_exit): Allow cleanup and exit even if there was an - error opening relay files. - (stp_main_loop): Call cleanup_and_exit() if init_relayfs() fails. - -2006-09-18 Martin Hunt <hunt@redhat.com> - - * stpd.c (usage): Remove "-m" option. - (main): Print warning if "-m" is used. - * librelay.c (merge_output): Rewrite to handle - new format that support binary. - (stp_main_loop): Read merge option from the - transport info message. - -2006-09-13 Martin Hunt <hunt@redhat.com> - - * librelay.c (init_relayfs): Exec stp_check and find - relay_filebase. - - * librelay.h (stp_main_loop): Fix declaration of init_stp(). - - * stpd.c (usage): Remove "-r" option. - (main): Don't find stpd_filebase and don't send it to init_stp(). - - -2006-08-02 Tom Zanussi <zanussi@us.ibm.com> - - * stpd.c (main): Use modname rather than driver_pid in - stpd_filebase. - -2006-07-20 Martin Hunt <hunt@redhat.com> - - * librelay.c (stp_main_loop): If module doesn't start, kill any - target command. - -2006-06-23 Tom Zanussi <zanussi@us.ibm.com> - - * librelay.c (cleanup_and_exit): Close relay files even if - not merging. - -2006-06-13 Martin Hunt <hunt@redhat.com> - - * librelay.c (start_cmd): Rewrite using sigwait() to eliminate - a race. - -2006-05-18 Martin Hunt <hunt@redhat.com> - - * librelay.c (stp_main_loop): Set output to always be line - buffered. - -2006-04-08 Martin Hunt <hunt@redhat.com> - - * librelay.c (stp_main_loop): Write with fwrite() instead - of fputs() so we can write binary data. - -2006-04-05 Martin Hunt <hunt@redhat.com> - * librelay.c (merge_output): Remove ANSI codes and write - warning to stderr. - -2006-04-05 Martin Hunt <hunt@redhat.com> - * librelay.c (merge_output): Set the output filename if necessary. - (merge_output): - - * stpd.c (main): Don't reset output_filename just because - relayfs is possible. Move that code to librelay.c. - -2006-04-04 Roland McGrath <roland@redhat.com> - - * stpd.c (main): Cast f_type when comparing; type differs by machine. - -2006-04-04 Tom Zanussi <zanussi@us.ibm.com> - - * stpd.c (main): Check that /mnt/relay is actually relayfs. - -2006-03-15 Tom Zanussi <zanussi@us.ibm.com> - - * stpd.c (main): Add runtime check for relayfs vs relay-on-proc. - -2006-03-06 Martin Hunt <hunt@redhat.com> - - * librelay.c (start_cmd): Set proper uid/gid before execing - command. - (system_cmd): New function. - (cleanup_and_exit): Wait for any child processes to complete. - (stp_main_loop): Recognize STP_SYSTEM message. - - * stpd.c (main): Add support for "-u username". - -2006-02-25 Martin Hunt <hunt@redhat.com> - - * librelay.c (init_stp): Better error handling and cleanup. - -2006-02-23 Frank Ch. Eigler <fche@elastic.org> - - PR 1304 - * stpd.c (mdooptions): New array. - (main): Populate it with leftover arguments. - * librelay.c (init_stp): Pass it to execve(). - -2005-12-08 Frank Ch. Eigler <fche@elastic.org> - - PR 1937 - * stpd.c (main): Support new "-d" option. - (usage): Document it. - * librelay.c (driver_poll): New function to react to death of - driver process. - (stp_main_loop): Call it if "-d PID" given. Treat SIGHUP like others. - -2005-10-19 Tom Zanussi <zanussi@us.ibm.com> - - * librelay.c: Move output_file var to stpd.c. - (stp_main_loop): If the output_file option was specified, - and streaming mode is being used, send output to the file - instead of stdout. If !streaming, send output to the file - instead of probe.out. - * stpd.c (usage): Add comment for -o option. - (main): Add -o option. - -2005-10-19 Tom Zanussi <zanussi@us.ibm.com> - - * librelay.c (merge_output): Switch to binary TIMESTAMP. - * stp_dump.c (main): Switch to binary TIMESTAMP. - * stp_merge.c (main): Switch to binary TIMESTAMP. - -2005-10-14 Tom Zanussi <zanussi@us.ibm.com> - - PR 1476 - * librelay.c: Add flag for buffer processing. - (reader_thread): Disable/enable cancel state around buffer - processing, and update flag to show we're busy processing. - (cleanup_and_exit): Wait for any threads busy processing. - (stp_main_loop): Initialize processing mutex. - -2005-09-06 Martin Hunt <hunt@redhat.com> - - * librelay.c: Remove all USE_PROCFS ifdefs. - (sig_usr): Signal handler for SIGUSR1. - (start_cmd): New function to handle "-c" option, forks() - off a new process then waits for SIGUSR1 to exec it. - (init_stp): Call start_cmd(). - (stp_main_loop): Set a signal handler for SIGCHLD. - - * stpd.c (main): Add "-t" and "-c" options. - (usage): Update with new options. - -2005-08-29 Martin Hunt <hunt@redhat.com> - - * stpd.c main): Add enable_relayfs flag. - Turn it off with "-r". - -2005-08-24 Martin Hunt <hunt@redhat.com> - - * librelay.c (sigproc): Removed the "Exiting..." - message for now. - -2005-08-24 Martin Hunt <hunt@redhat.com> - - * librelay.c (sigproc): Reestablish signal handler so - impatient people don't hit ^C twice and terminate the - program before it saves the data and removes the module. - Also print a message to stderr that it is exiting. - (stp_main_loop): Write OOB data (warnings, errors, etc) - to stderr instead of stdout. - * librelay.h: Write debug info to stderr. - * Makefile: add librelay.h to dependencies. - -2005-08-23 Martin Hunt <hunt@redhat.com> - - * librelay.c (merge_output): Don't add an extra \n. - -2005-08-23 Martin Hunt <hunt@redhat.com> - - * librelay.c (read_last_buffers): New function. Directly grab the - last buffers. - (info_pending): Deleted. - (request_last_buffers): Deleted. - -2005-08-22 Martin Hunt <hunt@redhat.com> - - * Makefile (debug): Add debug target. - * librelay.h (dbug): Define. - * librelay.c: Enable some dbug lines. - -2005-08-19 Martin Hunt <hunt@redhat.com> - - * librelay.c (reader_thread): Check the return value for write(). - -2005-08-19 Frank Ch. Eigler <fche@elastic.org> - - * librelay.c (modpath): New global. Use it for insmod only. - * stpd.c (main): Set both modpath and modname, to support - modules specified by full path name. - -2005-08-19 Martin Hunt <hunt@redhat.com> - - * stpd.c (main): Simplify buffer size code. - * librelay.c: Major changes to support procfs instead of netlink. - -2005-08-03 Tom Zanussi <trz@us.ibm.com> - - * librelay.c: Track subbuf info requests/replies - so we know unequivocally when it's ok to do final - processing. - (reader_thread): Remove buffer-full warning. - -2005-08-03 Martin Hunt <hunt@redhat.com> - * librelay.c (init_stp): Change variable name to eliminate shadow warning. - -2005-08-03 Martin Hunt <hunt@redhat.com> - * librelay.c (open_control_channel): Set the receive buffer - to 512K, or the max allowed. - - * stpd.c: Remove "-n" subbug option and change "-b" option - so you can specify buffering in different ways. Add a verbose option. - Exec the "stp_check" script. - -2005-08-01 Frank Ch. Eigler <fche@redhat.com> - - * librelay.c: Correct fwrite api usage. - * all: Correct copyright holder name. - -2005-08-01 Martin Hunt <hunt@redhat.com> - - * librelay.h: Get structs and enums from - ../transport/transport_msgs.h to eliminate duplication. - - * librelay.c (send_request): Retry if send fails. - (open_relayfs_files): Use fopen() instead of open() for the - percpu tmpfiles. - (request_last_buffers): Just send cpu number for STP_BUF_INFO request. - (reader_thread): Ditto. - (process_subbufs): Use fwrite_unlocked() instead of write(). - (sigchld): Removed. - (init_stp): Go back to using system() instead of fork and exec - to load module. When done, send a TRANSPORT_INFO request. - (cleanup_and_exit): Change parameter to simple flag to - indicate if the module needs removing. - (sigproc): Remove complicated logic and just send STP_EXIT. - (stp_main_loop): When receiving STP_TRANSPORT_INFO, set - the local params and reply with a STP_START. When - receiving STP_START, there was an error, so cleanup and exit. - - * stpd.c (main): Added new options to set number of - buffers and their size. - -2005-07-29 Roland McGrath <roland@redhat.com> - - * librelay.c (process_subbufs): Use unsigned for I. - (sigproc): Add __attribute__((unused)) on parameter. - (sigchld): Likewise. Avoid shadowing global variable name. - (stp_main_loop): Add a cast. - -2005-07-18 Martin Hunt <hunt@redhat.com> - - * stp_merge.c (main): Fix dropped count calculation. - -2005-07-14 Tom Zanussi <zanussi@us.ibm.com> - - * librelay.c (reader_thread): Add missing pthread_mutex_lock - -2005-07-14 Frank Ch. Eigler <fche@redhat.com> - - * stpd.c (main): Pass !quiet mode to init_stp(). - * librelay.c (init_relayfs): Be quiet if !print_totals. - -2005-07-13 Martin Hunt <hunt@redhat.com> - - * stpd.c (usage): Fix usage string. - - * librelay.c (init_stp): Change last arg to NULL, not 0. - -2005-07-08 Martin Hunt <hunt@redhat.com> - - * librelay.c (sigchld): Signal handler to detect - completion of module loading. - (init_stp): Use fork/exec instead of system() so - we can get async signal of module load success/failure. - (cleanup_and_exit): New function. - (sigproc): If module is not loaded, don't send message to it. - (stp_main_loop): Call cleanup_and_exit() when STP_EXIT - is received. Don't send a request for the transport - mode. The module will send notification to the daemon - when it is ready. - - * stpd.c (main): Don't print message until module - is loaded. - -2005-07-01 Martin Hunt <hunt@redhat.com> - - * librelay.c: Removed the color coding of cpu output. - -2005-06-28 Martin Hunt <hunt@redhat.com> - - * librelay.c (merge_output): Use unlocked stdio - to improve speed. - - * stp_merge.c: New file. - - * Makefile: Add stp_merge. - -2005-06-27 Martin Hunt <hunt@redhat.com> - - * stpd.c (main): Add new command line arg, "-m" - to disable the per-cpu merging. - - * librelay.c (merge_output): Replacement for sort_output(). - Efficiently merges per-cpu streams. - - -2005-06-20 Tom Zanussi <zanussi@us.ibm.com> - - * librelay.c: Large refactoring, important changes are - added transport_mode command, for relayfs transport - display results only when probe completes and/or write - output file, merge, sort and delete the per-cpu files - in postprocessing, refactor so that relayfs files aren't - created until transport command received, removed sigalrm, - read the final subbuffers on exit - - * stpd.c: Remove all command-line args except for -p - and -q as well as all code related to buffer sizes. - - * librelay.h: Add transport mode command and struct. - -2005-05-16 Martin Hunt <hunt@redhat.com> - - * librelay.c (sigproc): If STP_EXIT send fails, keep retrying - every 10ms. - (init_stp): Don't set n_subbufs and subbuf_size params. |