Version bumps for the 1.0 release

4 files changed, 990 insertions, 681 deletions

diff --git a/testsuite/Makefile.in b/testsuite/Makefile.in
index c0f0b19c..7358bd2c 100644
--- a/testsuite/Makefile.in
+++ b/testsuite/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 # Makefile.am --- automake input file for systemtap testsuite
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -42,6 +44,7 @@ am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DEJATOOL = $(PACKAGE)
 ACLOCAL = @ACLOCAL@
@@ -114,6 +117,7 @@ sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 AUTOMAKE_OPTIONS = dejagnu no-dist
@@ -140,15 +144,15 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
-	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 		&& exit 0; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -164,9 +168,10 @@ $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENC
 	$(SHELL) ./config.status --recheck
 
 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(srcdir) && $(AUTOCONF)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
 tags: TAGS
 TAGS:
 
@@ -228,6 +233,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -247,6 +253,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -255,18 +263,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -289,7 +307,7 @@ ps-am:
 
 uninstall-am:
 
-.MAKE: install-am install-strip
+.MAKE: check-am install-am install-strip
 
 .PHONY: all all-am all-local am--refresh check check-DEJAGNU check-am \
 	check-local clean clean-generic clean-local distclean \
@@ -322,6 +340,7 @@ check-local:
 installcheck: site.exp
 	-$(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU RUNTESTFLAGS="$(RUNTESTFLAGS) --tool_opts \'install $(TOOL_OPTS)\'"
 	if test -n "$(DEJAZILLA)"; then mail $(DEJAZILLA) < systemtap.sum; fi
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/testsuite/aclocal.m4 b/testsuite/aclocal.m4
index 5aee677e..a237cb5a 100644
--- a/testsuite/aclocal.m4
+++ b/testsuite/aclocal.m4
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.10 -*- Autoconf -*-
+# generated automatically by aclocal 1.11 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006  Free Software Foundation, Inc.
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -11,12 +11,15 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
-m4_if(m4_PACKAGE_VERSION, [2.61],,
-[m4_fatal([this file was generated for autoconf 2.61.
-You have another version of autoconf.  If you want to use that,
-you should regenerate the build system entirely.], [63])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],,
+[m4_warning([this file was generated for autoconf 2.63.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
 
-# Copyright (C) 2002, 2003, 2005, 2006  Free Software Foundation, Inc.
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -28,10 +31,10 @@ you should regenerate the build system entirely.], [63])])
 # generated from the m4 files accompanying Automake X.Y.
 # (This private macro should not be called outside this file.)
 AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.10'
+[am__api_version='1.11'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.10], [],
+m4_if([$1], [1.11], [],
       [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
 ])
 
@@ -45,10 +48,12 @@ m4_define([_AM_AUTOCONF_VERSION], [])
 # AM_SET_CURRENT_AUTOMAKE_VERSION
 # -------------------------------
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.10])dnl
-_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
+[AM_AUTOMAKE_VERSION([1.11])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
@@ -105,14 +110,14 @@ am_aux_dir=`cd $ac_aux_dir && pwd`
 
 # AM_CONDITIONAL                                            -*- Autoconf -*-
 
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 8
+# serial 9
 
 # AM_CONDITIONAL(NAME, SHELL-CONDITION)
 # -------------------------------------
@@ -125,6 +130,7 @@ AC_SUBST([$1_TRUE])dnl
 AC_SUBST([$1_FALSE])dnl
 _AM_SUBST_NOTMAKE([$1_TRUE])dnl
 _AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
 if $2; then
   $1_TRUE=
   $1_FALSE='#'
@@ -141,13 +147,13 @@ fi])])
 # Do all the work for Automake.                             -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006 Free Software Foundation, Inc.
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 12
+# serial 16
 
 # This macro actually does too much.  Some checks are only needed if
 # your package does certain things.  But this isn't really a big deal.
@@ -164,7 +170,7 @@ fi])])
 # arguments mandatory, and then we can depend on a new Autoconf
 # release and drop the old call support.
 AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.60])dnl
+[AC_PREREQ([2.62])dnl
 dnl Autoconf wants to disallow AM_ names.  We explicitly allow
 dnl the ones we care about.
 m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
@@ -215,8 +221,8 @@ AM_MISSING_PROG(AUTOCONF, autoconf)
 AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
 AM_MISSING_PROG(AUTOHEADER, autoheader)
 AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
 AC_REQUIRE([AM_PROG_MKDIR_P])dnl
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
@@ -224,24 +230,37 @@ AC_REQUIRE([AC_PROG_AWK])dnl
 AC_REQUIRE([AC_PROG_MAKE_SET])dnl
 AC_REQUIRE([AM_SET_LEADING_DOT])dnl
 _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-	      		     [_AM_PROG_TAR([v7])])])
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
 _AM_IF_OPTION([no-dependencies],,
 [AC_PROVIDE_IFELSE([AC_PROG_CC],
-                  [_AM_DEPENDENCIES(CC)],
-                  [define([AC_PROG_CC],
-                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+		  [_AM_DEPENDENCIES(CC)],
+		  [define([AC_PROG_CC],
+			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
 AC_PROVIDE_IFELSE([AC_PROG_CXX],
-                  [_AM_DEPENDENCIES(CXX)],
-                  [define([AC_PROG_CXX],
-                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+		  [_AM_DEPENDENCIES(CXX)],
+		  [define([AC_PROG_CXX],
+			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
 AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-                  [_AM_DEPENDENCIES(OBJC)],
-                  [define([AC_PROG_OBJC],
-                          defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+		  [_AM_DEPENDENCIES(OBJC)],
+		  [define([AC_PROG_OBJC],
+			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
 ])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
 ])
 
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
 
 # When config.status generates a header, we must update the stamp-h file.
 # This file resides in the same directory as the config header
@@ -252,18 +271,19 @@ AC_PROVIDE_IFELSE([AC_PROG_OBJC],
 # our stamp files there.
 AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
 [# Compute $1's index in $config_headers.
+_am_arg=$1
 _am_stamp_count=1
 for _am_header in $config_headers :; do
   case $_am_header in
-    $1 | $1:* )
+    $_am_arg | $_am_arg:* )
       break ;;
     * )
       _am_stamp_count=`expr $_am_stamp_count + 1` ;;
   esac
 done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
 
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -274,7 +294,14 @@ echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
 # Define $install_sh.
 AC_DEFUN([AM_PROG_INSTALL_SH],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
 AC_SUBST(install_sh)])
 
 # Copyright (C) 2003, 2005  Free Software Foundation, Inc.
@@ -301,27 +328,38 @@ AC_SUBST([am__leading_dot])])
 # Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
 # From Jim Meyering
 
-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
+# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 4
+# serial 5
 
+# AM_MAINTAINER_MODE([DEFAULT-MODE])
+# ----------------------------------
+# Control maintainer-specific portions of Makefiles.
+# Default is to disable them, unless `enable' is passed literally.
+# For symmetry, `disable' may be passed as well.  Anyway, the user
+# can override the default with the --enable/--disable switch.
 AC_DEFUN([AM_MAINTAINER_MODE],
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode  enable make rules and dependencies not useful
+[m4_case(m4_default([$1], [disable]),
+       [enable], [m4_define([am_maintainer_other], [disable])],
+       [disable], [m4_define([am_maintainer_other], [enable])],
+       [m4_define([am_maintainer_other], [enable])
+        m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
+AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])
+  dnl maintainer-mode's default is 'disable' unless 'enable' is passed
+  AC_ARG_ENABLE([maintainer-mode],
+[  --][am_maintainer_other][-maintainer-mode  am_maintainer_other make rules and dependencies not useful
 			  (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
+      [USE_MAINTAINER_MODE=$enableval],
+      [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
   AC_MSG_RESULT([$USE_MAINTAINER_MODE])
-  AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
+  AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
   MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
+  AC_SUBST([MAINT])dnl
 ]
 )
 
@@ -329,14 +367,14 @@ AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
 
 # Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 5
+# serial 6
 
 # AM_MISSING_PROG(NAME, PROGRAM)
 # ------------------------------
@@ -353,7 +391,14 @@ AC_SUBST($1)])
 AC_DEFUN([AM_MISSING_HAS_RUN],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
 AC_REQUIRE_AUX_FILE([missing])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
 # Use eval to expand $SHELL
 if eval "$MISSING --run true"; then
   am_missing_run="$MISSING --run "
@@ -391,13 +436,13 @@ esac
 
 # Helper functions for option handling.                     -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 3
+# serial 4
 
 # _AM_MANGLE_OPTION(NAME)
 # -----------------------
@@ -414,7 +459,7 @@ AC_DEFUN([_AM_SET_OPTION],
 # ----------------------------------
 # OPTIONS is a space-separated list of Automake options.
 AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
 
 # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
 # -------------------------------------------
@@ -424,14 +469,14 @@ AC_DEFUN([_AM_IF_OPTION],
 
 # Check to make sure that the build environment is sane.    -*- Autoconf -*-
 
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 4
+# serial 5
 
 # AM_SANITY_CHECK
 # ---------------
@@ -440,16 +485,29 @@ AC_DEFUN([AM_SANITY_CHECK],
 # Just in case
 sleep 1
 echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
 # Do `set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
    if test "$[*]" = "X"; then
       # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
+      set X `ls -t "$srcdir/configure" conftest.file`
    fi
    rm -f conftest.file
    if test "$[*]" != "X $srcdir/configure conftest.file" \
@@ -502,18 +560,25 @@ fi
 INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 AC_SUBST([INSTALL_STRIP_PROGRAM])])
 
-# Copyright (C) 2006  Free Software Foundation, Inc.
+# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
+# serial 2
+
 # _AM_SUBST_NOTMAKE(VARIABLE)
 # ---------------------------
-# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
 # This macro is traced by Automake.
 AC_DEFUN([_AM_SUBST_NOTMAKE])
 
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
 # Check how to create a tarball.                            -*- Autoconf -*-
 
 # Copyright (C) 2004, 2005  Free Software Foundation, Inc.
diff --git a/testsuite/configure b/testsuite/configure
index 5e195385..5e75929c 100755
--- a/testsuite/configure
+++ b/testsuite/configure
@@ -1,11 +1,11 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.61 for systemtap 0.9.9.
+# Generated by GNU Autoconf 2.63 for systemtap 1.0.
 #
 # Report bugs to <systemtap@sources.redhat.com>.
 #
 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
 ## --------------------- ##
@@ -17,7 +17,7 @@ DUALCASE=1; export DUALCASE # for MKS sh
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
@@ -39,17 +39,45 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS
 as_cr_digits='0123456789'
 as_cr_alnum=$as_cr_Letters$as_cr_digits
 
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
   else
-    PATH_SEPARATOR=:
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
   fi
-  rm -f conf$$.sh
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
 fi
 
 # Support unset when possible.
@@ -65,8 +93,6 @@ fi
 # there to prevent editors from complaining about space-tab.
 # (If _AS_PATH_WALK were called with IFS unset, it would disable word
 # splitting by setting IFS to empty value.)
-as_nl='
-'
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
@@ -89,7 +115,7 @@ if test "x$as_myself" = x; then
   as_myself=$0
 fi
 if test ! -f "$as_myself"; then
-  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
   { (exit 1); exit 1; }
 fi
 
@@ -102,17 +128,10 @@ PS2='> '
 PS4='+ '
 
 # NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-  fi
-done
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
 
 # Required to use basename.
 if expr a : '\(a\)' >/dev/null 2>&1 &&
@@ -134,7 +153,7 @@ as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
 	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
+$as_echo X/"$0" |
     sed '/^.*\/\([^/][^/]*\)\/*$/{
 	    s//\1/
 	    q
@@ -160,7 +179,7 @@ else
   as_have_required=no
 fi
 
-  if test $as_have_required = yes && 	 (eval ":
+  if test $as_have_required = yes &&	 (eval ":
 (as_func_return () {
   (exit \$1)
 }
@@ -242,7 +261,7 @@ IFS=$as_save_IFS
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
@@ -263,7 +282,7 @@ _ASEOF
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
@@ -343,10 +362,10 @@ fi
 
       if test "x$CONFIG_SHELL" != x; then
   for as_var in BASH_ENV ENV
-        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-        done
-        export CONFIG_SHELL
-        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+	do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+	done
+	export CONFIG_SHELL
+	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
 fi
 
 
@@ -415,9 +434,10 @@ fi
 
 test \$exitcode = 0") || {
   echo No shell found that supports shell functions.
-  echo Please tell autoconf@gnu.org about your system,
-  echo including any error possibly output before this
-  echo message
+  echo Please tell bug-autoconf@gnu.org about your system,
+  echo including any error possibly output before this message.
+  echo This can help us improve future autoconf versions.
+  echo Configuration will now proceed without shell functions.
 }
 
 
@@ -453,7 +473,7 @@ test \$exitcode = 0") || {
       s/-\n.*//
     ' >$as_me.lineno &&
   chmod +x "$as_me.lineno" ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
@@ -481,7 +501,6 @@ case `echo -n x` in
 *)
   ECHO_N='-n';;
 esac
-
 if expr a : '\(a\)' >/dev/null 2>&1 &&
    test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
@@ -494,19 +513,22 @@ if test -d conf$$.dir; then
   rm -f conf$$.dir/conf$$.file
 else
   rm -f conf$$.dir
-  mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s='ln -s'
-  # ... but there are two gotchas:
-  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-  # In both cases, we have to default to `cp -p'.
-  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
     as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
+  fi
 else
   as_ln_s='cp -p'
 fi
@@ -531,10 +553,10 @@ else
   as_test_x='
     eval sh -c '\''
       if test -d "$1"; then
-        test -d "$1/.";
+	test -d "$1/.";
       else
 	case $1 in
-        -*)set "./$1";;
+	-*)set "./$1";;
 	esac;
 	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
 	???[sx]*):;;*)false;;esac;fi
@@ -574,76 +596,82 @@ SHELL=${CONFIG_SHELL-/bin/sh}
 # Identity of this package.
 PACKAGE_NAME='systemtap'
 PACKAGE_TARNAME='systemtap'
-PACKAGE_VERSION='0.9.9'
-PACKAGE_STRING='systemtap 0.9.9'
+PACKAGE_VERSION='1.0'
+PACKAGE_STRING='systemtap 1.0'
 PACKAGE_BUGREPORT='systemtap@sources.redhat.com'
 
-ac_subst_vars='SHELL
-PATH_SEPARATOR
-PACKAGE_NAME
-PACKAGE_TARNAME
-PACKAGE_VERSION
-PACKAGE_STRING
-PACKAGE_BUGREPORT
-exec_prefix
-prefix
-program_transform_name
-bindir
-sbindir
-libexecdir
-datarootdir
-datadir
-sysconfdir
-sharedstatedir
-localstatedir
-includedir
-oldincludedir
-docdir
-infodir
-htmldir
-dvidir
-pdfdir
-psdir
-libdir
-localedir
-mandir
-DEFS
-ECHO_C
-ECHO_N
-ECHO_T
-LIBS
-build_alias
-host_alias
-target_alias
-INSTALL_PROGRAM
-INSTALL_SCRIPT
-INSTALL_DATA
-am__isrc
-CYGPATH_W
-PACKAGE
-VERSION
-ACLOCAL
-AUTOCONF
-AUTOMAKE
-AUTOHEADER
-MAKEINFO
-install_sh
-STRIP
-INSTALL_STRIP_PROGRAM
-mkdir_p
-AWK
-SET_MAKE
-am__leading_dot
-AMTAR
-am__tar
-am__untar
-MAINTAINER_MODE_TRUE
-MAINTAINER_MODE_FALSE
-MAINT
-dejazilla
+ac_subst_vars='LTLIBOBJS
 LIBOBJS
-LTLIBOBJS'
+dejazilla
+MAINT
+MAINTAINER_MODE_FALSE
+MAINTAINER_MODE_TRUE
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
 ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_maintainer_mode
+enable_dejazilla
+'
       ac_precious_vars='build_alias
 host_alias
 target_alias'
@@ -652,6 +680,8 @@ target_alias'
 # Initialize some variables set by options.
 ac_init_help=
 ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
 # The variables have the same names as the options, with
 # dashes changed to underlines.
 cache_file=/dev/null
@@ -750,13 +780,21 @@ do
     datarootdir=$ac_optarg ;;
 
   -disable-* | --disable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-    eval enable_$ac_feature=no ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
 
   -docdir | --docdir | --docdi | --doc | --do)
     ac_prev=docdir ;;
@@ -769,13 +807,21 @@ do
     dvidir=$ac_optarg ;;
 
   -enable-* | --enable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-    eval enable_$ac_feature=\$ac_optarg ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
 
   -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
   | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -966,22 +1012,38 @@ do
     ac_init_version=: ;;
 
   -with-* | --with-*)
-    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-    eval with_$ac_package=\$ac_optarg ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
 
   -without-* | --without-*)
-    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-    eval with_$ac_package=no ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
 
   --x)
     # Obsolete; use --with-x.
@@ -1001,7 +1063,7 @@ do
   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
     x_libraries=$ac_optarg ;;
 
-  -*) { echo "$as_me: error: unrecognized option: $ac_option
+  -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
 Try \`$0 --help' for more information." >&2
    { (exit 1); exit 1; }; }
     ;;
@@ -1010,16 +1072,16 @@ Try \`$0 --help' for more information." >&2
     ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
     # Reject names that are not valid shell variable names.
     expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+      { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
    { (exit 1); exit 1; }; }
     eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
 
   *)
     # FIXME: should be removed in autoconf 3.0.
-    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
     expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
     : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
     ;;
 
@@ -1028,22 +1090,38 @@ done
 
 if test -n "$ac_prev"; then
   ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { echo "$as_me: error: missing argument to $ac_option" >&2
+  { $as_echo "$as_me: error: missing argument to $ac_option" >&2
    { (exit 1); exit 1; }; }
 fi
 
-# Be sure to have absolute directory names.
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2
+   { (exit 1); exit 1; }; } ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
 for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
 		datadir sysconfdir sharedstatedir localstatedir includedir \
 		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
 		libdir localedir mandir
 do
   eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
   case $ac_val in
     [\\/$]* | ?:[\\/]* )  continue;;
     NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
   esac
-  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+  { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
    { (exit 1); exit 1; }; }
 done
 
@@ -1058,7 +1136,7 @@ target=$target_alias
 if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then
     cross_compiling=maybe
-    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+    $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
     If a cross compiler is detected then cross compile mode will be used." >&2
   elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes
@@ -1074,10 +1152,10 @@ test "$silent" = yes && exec 6>/dev/null
 ac_pwd=`pwd` && test -n "$ac_pwd" &&
 ac_ls_di=`ls -di .` &&
 ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  { echo "$as_me: error: Working directory cannot be determined" >&2
+  { $as_echo "$as_me: error: working directory cannot be determined" >&2
    { (exit 1); exit 1; }; }
 test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  { echo "$as_me: error: pwd does not report name of working directory" >&2
+  { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
    { (exit 1); exit 1; }; }
 
 
@@ -1085,12 +1163,12 @@ test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
 if test -z "$srcdir"; then
   ac_srcdir_defaulted=yes
   # Try the directory containing this script, then the parent directory.
-  ac_confdir=`$as_dirname -- "$0" ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$0" : 'X\(//\)[^/]' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$0" |
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -1117,12 +1195,12 @@ else
 fi
 if test ! -r "$srcdir/$ac_unique_file"; then
   test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+  { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
    { (exit 1); exit 1; }; }
 fi
 ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
 ac_abs_confdir=`(
-	cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
+	cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
    { (exit 1); exit 1; }; }
 	pwd)`
 # When building in place, set srcdir=.
@@ -1149,7 +1227,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures systemtap 0.9.9 to adapt to many kinds of systems.
+\`configure' configures systemtap 1.0 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1171,9 +1249,9 @@ Configuration:
 
 Installation directories:
   --prefix=PREFIX         install architecture-independent files in PREFIX
-			  [$ac_default_prefix]
+                          [$ac_default_prefix]
   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-			  [PREFIX]
+                          [PREFIX]
 
 By default, \`make install' will install all the files in
 \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
@@ -1183,25 +1261,25 @@ for instance \`--prefix=\$HOME'.
 For better control, use the options below.
 
 Fine tuning of the installation directories:
-  --bindir=DIR           user executables [EPREFIX/bin]
-  --sbindir=DIR          system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
-  --libdir=DIR           object code libraries [EPREFIX/lib]
-  --includedir=DIR       C header files [PREFIX/include]
-  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --datarootdir=DIR      read-only arch.-independent data root [PREFIX/share]
-  --datadir=DIR          read-only architecture-independent data [DATAROOTDIR]
-  --infodir=DIR          info documentation [DATAROOTDIR/info]
-  --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]
-  --mandir=DIR           man documentation [DATAROOTDIR/man]
-  --docdir=DIR           documentation root [DATAROOTDIR/doc/systemtap]
-  --htmldir=DIR          html documentation [DOCDIR]
-  --dvidir=DIR           dvi documentation [DOCDIR]
-  --pdfdir=DIR           pdf documentation [DOCDIR]
-  --psdir=DIR            ps documentation [DOCDIR]
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/systemtap]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
 _ACEOF
 
   cat <<\_ACEOF
@@ -1215,11 +1293,12 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of systemtap 0.9.9:";;
+     short | recursive ) echo "Configuration of systemtap 1.0:";;
    esac
   cat <<\_ACEOF
 
 Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
   --enable-maintainer-mode  enable make rules and dependencies not useful
@@ -1238,15 +1317,17 @@ fi
 if test "$ac_init_help" = "recursive"; then
   # If there are subdirs, report their specific --help.
   for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d "$ac_dir" || continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
     ac_builddir=.
 
 case "$ac_dir" in
 .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
 *)
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
   # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
   case $ac_top_builddir_sub in
   "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
   *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
@@ -1282,7 +1363,7 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
       echo &&
       $SHELL "$ac_srcdir/configure" --help=recursive
     else
-      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
     fi || ac_status=$?
     cd "$ac_pwd" || { ac_status=$?; break; }
   done
@@ -1291,11 +1372,11 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-systemtap configure 0.9.9
-generated by GNU Autoconf 2.61
+systemtap configure 1.0
+generated by GNU Autoconf 2.63
 
 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
@@ -1305,8 +1386,8 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by systemtap $as_me 0.9.9, which was
-generated by GNU Autoconf 2.61.  Invocation command line was
+It was created by systemtap $as_me 1.0, which was
+generated by GNU Autoconf 2.63.  Invocation command line was
 
   $ $0 $@
 
@@ -1342,7 +1423,7 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  echo "PATH: $as_dir"
+  $as_echo "PATH: $as_dir"
 done
 IFS=$as_save_IFS
 
@@ -1377,7 +1458,7 @@ do
     | -silent | --silent | --silen | --sile | --sil)
       continue ;;
     *\'*)
-      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
     esac
     case $ac_pass in
     1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
@@ -1429,11 +1510,12 @@ _ASBOX
     case $ac_val in #(
     *${as_nl}*)
       case $ac_var in #(
-      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
       esac
       case $ac_var in #(
       _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
       *) $as_unset $ac_var ;;
       esac ;;
     esac
@@ -1463,9 +1545,9 @@ _ASBOX
     do
       eval ac_val=\$$ac_var
       case $ac_val in
-      *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
       esac
-      echo "$ac_var='\''$ac_val'\''"
+      $as_echo "$ac_var='\''$ac_val'\''"
     done | sort
     echo
 
@@ -1480,9 +1562,9 @@ _ASBOX
       do
 	eval ac_val=\$$ac_var
 	case $ac_val in
-	*\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
 	esac
-	echo "$ac_var='\''$ac_val'\''"
+	$as_echo "$ac_var='\''$ac_val'\''"
       done | sort
       echo
     fi
@@ -1498,8 +1580,8 @@ _ASBOX
       echo
     fi
     test "$ac_signal" != 0 &&
-      echo "$as_me: caught signal $ac_signal"
-    echo "$as_me: exit $exit_status"
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
   } >&5
   rm -f core *.core core.conftest.* &&
     rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
@@ -1541,21 +1623,24 @@ _ACEOF
 
 
 # Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
 if test -n "$CONFIG_SITE"; then
-  set x "$CONFIG_SITE"
+  ac_site_file1=$CONFIG_SITE
 elif test "x$prefix" != xNONE; then
-  set x "$prefix/share/config.site" "$prefix/etc/config.site"
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
 else
-  set x "$ac_default_prefix/share/config.site" \
-	"$ac_default_prefix/etc/config.site"
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
 fi
-shift
-for ac_site_file
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
 do
+  test "x$ac_site_file" = xNONE && continue
   if test -r "$ac_site_file"; then
-    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
+    { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
     sed 's/^/| /' "$ac_site_file" >&5
     . "$ac_site_file"
   fi
@@ -1565,16 +1650,16 @@ if test -r "$cache_file"; then
   # Some versions of bash will fail to source /dev/null (special
   # files actually), so we avoid doing that.
   if test -f "$cache_file"; then
-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
+    { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
     case $cache_file in
       [\\/]* | ?:[\\/]* ) . "$cache_file";;
       *)                      . "./$cache_file";;
     esac
   fi
 else
-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
+  { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
   >$cache_file
 fi
 
@@ -1588,29 +1673,38 @@ for ac_var in $ac_precious_vars; do
   eval ac_new_val=\$ac_env_${ac_var}_value
   case $ac_old_set,$ac_new_set in
     set,)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,set)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,);;
     *)
       if test "x$ac_old_val" != "x$ac_new_val"; then
-	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
-echo "$as_me:   former value:  $ac_old_val" >&2;}
-	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
-echo "$as_me:   current value: $ac_new_val" >&2;}
-	ac_cache_corrupted=:
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:$LINENO:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:$LINENO:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
       fi;;
   esac
   # Pass precious variables to config.status.
   if test "$ac_new_set" = set; then
     case $ac_new_val in
-    *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
     *) ac_arg=$ac_var=$ac_new_val ;;
     esac
     case " $ac_configure_args " in
@@ -1620,10 +1714,12 @@ echo "$as_me:   current value: $ac_new_val" >&2;}
   fi
 done
 if $ac_cache_corrupted; then
-  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+  { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -1677,8 +1773,8 @@ for ac_dir in .. "$srcdir"/..; do
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in .. \"$srcdir\"/.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in .. \"$srcdir\"/.." >&2;}
+  { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in .. \"$srcdir\"/.." >&5
+$as_echo "$as_me: error: cannot find install-sh or install.sh in .. \"$srcdir\"/.." >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -1691,7 +1787,7 @@ ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
 ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
 
 
-am__api_version='1.10'
+am__api_version='1.11'
 
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
@@ -1706,11 +1802,12 @@ am__api_version='1.10'
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
-{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
 if test -z "$INSTALL"; then
 if test "${ac_cv_path_install+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
@@ -1739,17 +1836,29 @@ case $as_dir/ in
 	    # program-specific install script used by HP pwplus--don't use.
 	    :
 	  else
-	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-	    break 3
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
 	  fi
 	fi
       done
     done
     ;;
 esac
+
 done
 IFS=$as_save_IFS
 
+rm -rf conftest.one conftest.two conftest.dir
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
@@ -1762,8 +1871,8 @@ fi
     INSTALL=$ac_install_sh
   fi
 fi
-{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
 # It thinks the first close brace ends the variable substitution.
@@ -1773,21 +1882,38 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
 # Just in case
 sleep 1
 echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    { { $as_echo "$as_me:$LINENO: error: unsafe absolute working directory name" >&5
+$as_echo "$as_me: error: unsafe absolute working directory name" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    { { $as_echo "$as_me:$LINENO: error: unsafe srcdir value: \`$srcdir'" >&5
+$as_echo "$as_me: error: unsafe srcdir value: \`$srcdir'" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
+
 # Do `set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
    if test "$*" = "X"; then
       # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
+      set X `ls -t "$srcdir/configure" conftest.file`
    fi
    rm -f conftest.file
    if test "$*" != "X $srcdir/configure conftest.file" \
@@ -1797,9 +1923,9 @@ if (
       # if, for instance, CONFIG_SHELL is bash and it inherits a
       # broken ls alias from the environment.  This has actually
       # happened.  Such a system could not be considered "sane".
-      { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
+      { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
 alias in your environment" >&5
-echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
+$as_echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
 alias in your environment" >&2;}
    { (exit 1); exit 1; }; }
    fi
@@ -1810,45 +1936,158 @@ then
    # Ok.
    :
 else
-   { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+   { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
 Check your system clock" >&5
-echo "$as_me: error: newly created file is older than distributed files!
+$as_echo "$as_me: error: newly created file is older than distributed files!
 Check your system clock" >&2;}
    { (exit 1); exit 1; }; }
 fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+{ $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
 test "$program_prefix" != NONE &&
   program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
   program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $.  echo might interpret backslashes.
+# Double any \ or $.
 # By default was `s,x,x', remove it if useless.
-cat <<\_ACEOF >conftest.sed
-s/[\\$]/&&/g;s/;s,x,x,$//
-_ACEOF
-program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm -f conftest.sed
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
 
 # expand $ac_aux_dir to an absolute path
 am_aux_dir=`cd $ac_aux_dir && pwd`
 
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
 # Use eval to expand $SHELL
 if eval "$MISSING --run true"; then
   am_missing_run="$MISSING --run "
 else
   am_missing_run=
-  { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+  { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
 fi
 
-{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
-echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; }
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
 if test -z "$MKDIR_P"; then
   if test "${ac_cv_path_mkdir+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
@@ -1883,8 +2122,8 @@ fi
     MKDIR_P="$ac_install_sh -d"
   fi
 fi
-{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5
-echo "${ECHO_T}$MKDIR_P" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
 
 mkdir_p="$MKDIR_P"
 case $mkdir_p in
@@ -1896,10 +2135,10 @@ for ac_prog in gawk mawk nawk awk
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_AWK+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$AWK"; then
   ac_cv_prog_AWK="$AWK" # Let the user override the test.
@@ -1912,7 +2151,7 @@ do
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AWK="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -1923,22 +2162,23 @@ fi
 fi
 AWK=$ac_cv_prog_AWK
 if test -n "$AWK"; then
-  { echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
   test -n "$AWK" && break
 done
 
-{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
-set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
 if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   cat >conftest.make <<\_ACEOF
 SHELL = /bin/sh
@@ -1955,12 +2195,12 @@ esac
 rm -f conftest.make
 fi
 if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-  { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
   SET_MAKE=
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
   SET_MAKE="MAKE=${MAKE-make}"
 fi
 
@@ -1979,8 +2219,8 @@ if test "`cd $srcdir && pwd`" != "`pwd`"; then
   am__isrc=' -I$(srcdir)'
   # test to see if srcdir already configured
   if test -f $srcdir/config.status; then
-    { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+    { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
    { (exit 1); exit 1; }; }
   fi
 fi
@@ -1997,7 +2237,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='systemtap'
- VERSION='0.9.9'
+ VERSION='1.0'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -2025,112 +2265,6 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
 
 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  { echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-  if test "x$ac_ct_STRIP" = x; then
-    STRIP=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    STRIP=$ac_ct_STRIP
-  fi
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
 # Always define AMTAR for backward compatibility.
@@ -2143,8 +2277,9 @@ am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
 
 
 
-{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
-echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; }
+
+{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
     # Check whether --enable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
@@ -2152,8 +2287,8 @@ else
   USE_MAINTAINER_MODE=no
 fi
 
-  { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
-echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
    if test $USE_MAINTAINER_MODE = yes; then
   MAINTAINER_MODE_TRUE=
   MAINTAINER_MODE_FALSE='#'
@@ -2177,8 +2312,8 @@ case "$enable_dejazilla" in
      *) dejazilla="$enable_dejazilla" ;;
 esac
 if test -n "$dejazilla"; then
-   { echo "$as_me:$LINENO: A \"make *check\" will email results to $dejazilla" >&5
-echo "$as_me: A \"make *check\" will email results to $dejazilla" >&6;}
+   { $as_echo "$as_me:$LINENO: A \"make *check\" will email results to $dejazilla" >&5
+$as_echo "$as_me: A \"make *check\" will email results to $dejazilla" >&6;}
 fi
 
 
@@ -2211,11 +2346,12 @@ _ACEOF
     case $ac_val in #(
     *${as_nl}*)
       case $ac_var in #(
-      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
       esac
       case $ac_var in #(
       _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
       *) $as_unset $ac_var ;;
       esac ;;
     esac
@@ -2248,12 +2384,12 @@ echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
 if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
   if test -w "$cache_file"; then
     test "x$cache_file" != "x/dev/null" &&
-      { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-echo "$as_me: updating cache $cache_file" >&6;}
+      { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
     cat confcache >$cache_file
   else
-    { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+    { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
   fi
 fi
 rm -f confcache
@@ -2270,6 +2406,12 @@ test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 # take arguments), then branch to the quote section.  Otherwise,
 # look for a macro that doesn't take arguments.
 ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
 t clear
 :clear
 s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
@@ -2299,7 +2441,7 @@ ac_ltlibobjs=
 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
   ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-  ac_i=`echo "$ac_i" | sed "$ac_script"`
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
   # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
   #    will be set to the directory where LIBOBJS objects are built.
   ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
@@ -2310,20 +2452,22 @@ LIBOBJS=$ac_libobjs
 LTLIBOBJS=$ac_ltlibobjs
 
 
+
 if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
-  { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
+  { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
 Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
+$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
 Usually this means the macro was only invoked conditionally." >&2;}
    { (exit 1); exit 1; }; }
 fi
 
 : ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
 ac_clean_files_save=$ac_clean_files
 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
+{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 #! $SHELL
 # Generated by $as_me.
 # Run this file to recreate the current configuration.
@@ -2336,7 +2480,7 @@ ac_cs_silent=false
 SHELL=\${CONFIG_SHELL-$SHELL}
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 ## --------------------- ##
 ## M4sh Initialization.  ##
 ## --------------------- ##
@@ -2346,7 +2490,7 @@ DUALCASE=1; export DUALCASE # for MKS sh
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
@@ -2368,17 +2512,45 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS
 as_cr_digits='0123456789'
 as_cr_alnum=$as_cr_Letters$as_cr_digits
 
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
   else
-    PATH_SEPARATOR=:
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
   fi
-  rm -f conf$$.sh
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
 fi
 
 # Support unset when possible.
@@ -2394,8 +2566,6 @@ fi
 # there to prevent editors from complaining about space-tab.
 # (If _AS_PATH_WALK were called with IFS unset, it would disable word
 # splitting by setting IFS to empty value.)
-as_nl='
-'
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
@@ -2418,7 +2588,7 @@ if test "x$as_myself" = x; then
   as_myself=$0
 fi
 if test ! -f "$as_myself"; then
-  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
   { (exit 1); exit 1; }
 fi
 
@@ -2431,17 +2601,10 @@ PS2='> '
 PS4='+ '
 
 # NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-  fi
-done
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
 
 # Required to use basename.
 if expr a : '\(a\)' >/dev/null 2>&1 &&
@@ -2463,7 +2626,7 @@ as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
 	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
+$as_echo X/"$0" |
     sed '/^.*\/\([^/][^/]*\)\/*$/{
 	    s//\1/
 	    q
@@ -2514,7 +2677,7 @@ $as_unset CDPATH
       s/-\n.*//
     ' >$as_me.lineno &&
   chmod +x "$as_me.lineno" ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
@@ -2542,7 +2705,6 @@ case `echo -n x` in
 *)
   ECHO_N='-n';;
 esac
-
 if expr a : '\(a\)' >/dev/null 2>&1 &&
    test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
@@ -2555,19 +2717,22 @@ if test -d conf$$.dir; then
   rm -f conf$$.dir/conf$$.file
 else
   rm -f conf$$.dir
-  mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s='ln -s'
-  # ... but there are two gotchas:
-  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-  # In both cases, we have to default to `cp -p'.
-  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
     as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
+  fi
 else
   as_ln_s='cp -p'
 fi
@@ -2592,10 +2757,10 @@ else
   as_test_x='
     eval sh -c '\''
       if test -d "$1"; then
-        test -d "$1/.";
+	test -d "$1/.";
       else
 	case $1 in
-        -*)set "./$1";;
+	-*)set "./$1";;
 	esac;
 	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
 	???[sx]*):;;*)false;;esac;fi
@@ -2617,8 +2782,8 @@ exec 6>&1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by systemtap $as_me 0.9.9, which was
-generated by GNU Autoconf 2.61.  Invocation command line was
+This file was extended by systemtap $as_me 1.0, which was
+generated by GNU Autoconf 2.63.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -2631,26 +2796,33 @@ on `(hostname || uname -n) 2>/dev/null | sed 1q`
 
 _ACEOF
 
-cat >>$CONFIG_STATUS <<_ACEOF
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 # Files that config.status was made for.
 config_files="$ac_config_files"
 
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 ac_cs_usage="\
 \`$as_me' instantiates files from templates according to the
 current configuration.
 
-Usage: $0 [OPTIONS] [FILE]...
+Usage: $0 [OPTION]... [FILE]...
 
   -h, --help       print this help, then exit
   -V, --version    print version number and configuration settings, then exit
-  -q, --quiet      do not print progress messages
+  -q, --quiet, --silent
+                   do not print progress messages
   -d, --debug      don't remove temporary files
       --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-		   instantiate the configuration file FILE
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
 
 Configuration files:
 $config_files
@@ -2658,13 +2830,13 @@ $config_files
 Report bugs to <bug-autoconf@gnu.org>."
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_version="\\
-systemtap config.status 0.9.9
-configured by $0, generated by GNU Autoconf 2.61,
-  with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+systemtap config.status 1.0
+configured by $0, generated by GNU Autoconf 2.63,
+  with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
 
-Copyright (C) 2006 Free Software Foundation, Inc.
+Copyright (C) 2008 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
 
@@ -2672,11 +2844,12 @@ ac_pwd='$ac_pwd'
 srcdir='$srcdir'
 INSTALL='$INSTALL'
 MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
 ac_need_defaults=:
 while test $# != 0
 do
@@ -2698,21 +2871,24 @@ do
   -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
     ac_cs_recheck=: ;;
   --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-    echo "$ac_cs_version"; exit ;;
+    $as_echo "$ac_cs_version"; exit ;;
   --debug | --debu | --deb | --de | --d | -d )
     debug=: ;;
   --file | --fil | --fi | --f )
     $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
     ac_need_defaults=false;;
   --he | --h |  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit ;;
+    $as_echo "$ac_cs_usage"; exit ;;
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil | --si | --s)
     ac_cs_silent=: ;;
 
   # This is an error.
-  -*) { echo "$as_me: error: unrecognized option: $1
+  -*) { $as_echo "$as_me: error: unrecognized option: $1
 Try \`$0 --help' for more information." >&2
    { (exit 1); exit 1; }; } ;;
 
@@ -2731,30 +2907,32 @@ if $ac_cs_silent; then
 fi
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 if \$ac_cs_recheck; then
-  echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  CONFIG_SHELL=$SHELL
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
   export CONFIG_SHELL
-  exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  exec "\$@"
 fi
 
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 exec 5>>config.log
 {
   echo
   sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
 ## Running $as_me. ##
 _ASBOX
-  echo "$ac_log"
+  $as_echo "$ac_log"
 } >&5
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 
 # Handling of arguments.
 for ac_config_target in $ac_config_targets
@@ -2762,8 +2940,8 @@ do
   case $ac_config_target in
     "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
 
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+  *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
    { (exit 1); exit 1; }; };;
   esac
 done
@@ -2802,130 +2980,144 @@ $debug ||
   (umask 077 && mkdir "$tmp")
 } ||
 {
-   echo "$me: cannot create a temporary directory in ." >&2
+   $as_echo "$as_me: cannot create a temporary directory in ." >&2
    { (exit 1); exit 1; }
 }
 
-#
-# Set up the sed scripts for CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
 if test -n "$CONFIG_FILES"; then
 
-_ACEOF
 
+ac_cr='
'
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
+_ACEOF
 
 
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
 ac_delim='%!_!# '
 for ac_last_try in false false false false false :; do
-  cat >conf$$subs.sed <<_ACEOF
-SHELL!$SHELL$ac_delim
-PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-exec_prefix!$exec_prefix$ac_delim
-prefix!$prefix$ac_delim
-program_transform_name!$program_transform_name$ac_delim
-bindir!$bindir$ac_delim
-sbindir!$sbindir$ac_delim
-libexecdir!$libexecdir$ac_delim
-datarootdir!$datarootdir$ac_delim
-datadir!$datadir$ac_delim
-sysconfdir!$sysconfdir$ac_delim
-sharedstatedir!$sharedstatedir$ac_delim
-localstatedir!$localstatedir$ac_delim
-includedir!$includedir$ac_delim
-oldincludedir!$oldincludedir$ac_delim
-docdir!$docdir$ac_delim
-infodir!$infodir$ac_delim
-htmldir!$htmldir$ac_delim
-dvidir!$dvidir$ac_delim
-pdfdir!$pdfdir$ac_delim
-psdir!$psdir$ac_delim
-libdir!$libdir$ac_delim
-localedir!$localedir$ac_delim
-mandir!$mandir$ac_delim
-DEFS!$DEFS$ac_delim
-ECHO_C!$ECHO_C$ac_delim
-ECHO_N!$ECHO_N$ac_delim
-ECHO_T!$ECHO_T$ac_delim
-LIBS!$LIBS$ac_delim
-build_alias!$build_alias$ac_delim
-host_alias!$host_alias$ac_delim
-target_alias!$target_alias$ac_delim
-INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-INSTALL_DATA!$INSTALL_DATA$ac_delim
-am__isrc!$am__isrc$ac_delim
-CYGPATH_W!$CYGPATH_W$ac_delim
-PACKAGE!$PACKAGE$ac_delim
-VERSION!$VERSION$ac_delim
-ACLOCAL!$ACLOCAL$ac_delim
-AUTOCONF!$AUTOCONF$ac_delim
-AUTOMAKE!$AUTOMAKE$ac_delim
-AUTOHEADER!$AUTOHEADER$ac_delim
-MAKEINFO!$MAKEINFO$ac_delim
-install_sh!$install_sh$ac_delim
-STRIP!$STRIP$ac_delim
-INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
-mkdir_p!$mkdir_p$ac_delim
-AWK!$AWK$ac_delim
-SET_MAKE!$SET_MAKE$ac_delim
-am__leading_dot!$am__leading_dot$ac_delim
-AMTAR!$AMTAR$ac_delim
-am__tar!$am__tar$ac_delim
-am__untar!$am__untar$ac_delim
-MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim
-MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim
-MAINT!$MAINT$ac_delim
-dejazilla!$dejazilla$ac_delim
-LIBOBJS!$LIBOBJS$ac_delim
-LTLIBOBJS!$LTLIBOBJS$ac_delim
-_ACEOF
+  . ./conf$$subs.sh ||
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
 
-  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 65; then
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
     break
   elif $ac_last_try; then
-    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
    { (exit 1); exit 1; }; }
   else
     ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
 done
+rm -f conf$$subs.sh
 
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
-  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-  ac_eof=`expr $ac_eof + 1`
-fi
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\).*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\).*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
 
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
 _ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-:end
-s/|#_!!_#|//g
-CEOF$ac_eof
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+  || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
+$as_echo "$as_me: error: could not setup config files machinery" >&2;}
+   { (exit 1); exit 1; }; }
 _ACEOF
 
-
 # VPATH may cause trouble with some makes, so we remove $(srcdir),
 # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
 # trailing colons and then remove the whole line if VPATH becomes empty
@@ -2941,19 +3133,21 @@ s/^[^=]*=[	 ]*$//
 }'
 fi
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 fi # test -n "$CONFIG_FILES"
 
 
-for ac_tag in  :F $CONFIG_FILES
+eval set X "  :F $CONFIG_FILES      "
+shift
+for ac_tag
 do
   case $ac_tag in
   :[FHLC]) ac_mode=$ac_tag; continue;;
   esac
   case $ac_mode$ac_tag in
   :[FHL]*:*);;
-  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+  :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
+$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
    { (exit 1); exit 1; }; };;
   :[FH]-) ac_tag=-:-;;
   :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
@@ -2982,26 +3176,38 @@ echo "$as_me: error: Invalid tag $ac_tag." >&2;}
 	   [\\/$]*) false;;
 	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
 	   esac ||
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+	   { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
    { (exit 1); exit 1; }; };;
       esac
-      ac_file_inputs="$ac_file_inputs $ac_f"
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      ac_file_inputs="$ac_file_inputs '$ac_f'"
     done
 
     # Let's still pretend it is `configure' which instantiates (i.e., don't
     # use $as_me), people would be surprised to read:
     #    /* config.h.  Generated by config.status.  */
-    configure_input="Generated from "`IFS=:
-	  echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
     if test x"$ac_file" != x-; then
       configure_input="$ac_file.  $configure_input"
-      { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
+      { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
     fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
 
     case $ac_tag in
-    *:-:* | *:-) cat >"$tmp/stdin";;
+    *:-:* | *:-) cat >"$tmp/stdin" \
+      || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; } ;;
     esac
     ;;
   esac
@@ -3011,7 +3217,7 @@ $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$ac_file" : 'X\(//\)[^/]' \| \
 	 X"$ac_file" : 'X\(//\)$' \| \
 	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$ac_file" |
+$as_echo X"$ac_file" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -3037,7 +3243,7 @@ echo X"$ac_file" |
     as_dirs=
     while :; do
       case $as_dir in #(
-      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
       *) as_qdir=$as_dir;;
       esac
       as_dirs="'$as_qdir' $as_dirs"
@@ -3046,7 +3252,7 @@ $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$as_dir" : 'X\(//\)[^/]' \| \
 	 X"$as_dir" : 'X\(//\)$' \| \
 	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
+$as_echo X"$as_dir" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -3067,17 +3273,17 @@ echo X"$as_dir" |
       test -d "$as_dir" && break
     done
     test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
+  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
    { (exit 1); exit 1; }; }; }
   ac_builddir=.
 
 case "$ac_dir" in
 .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
 *)
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
   # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
   case $ac_top_builddir_sub in
   "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
   *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
@@ -3122,12 +3328,13 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
   esac
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # If the template does not know about datarootdir, expand it.
 # FIXME: This hack should be removed a few years after 2.60.
 ac_datarootdir_hack=; ac_datarootdir_seen=
 
-case `sed -n '/datarootdir/ {
+ac_sed_dataroot='
+/datarootdir/ {
   p
   q
 }
@@ -3136,13 +3343,14 @@ case `sed -n '/datarootdir/ {
 /@infodir@/p
 /@localedir@/p
 /@mandir@/p
-' $ac_file_inputs` in
+'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
 *datarootdir*) ac_datarootdir_seen=yes;;
 *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+  { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
   ac_datarootdir_hack='
   s&@datadir@&$datadir&g
   s&@docdir@&$docdir&g
@@ -3156,15 +3364,16 @@ _ACEOF
 # Neutralize VPATH when `$srcdir' = `.'.
 # Shell code in configure.ac might set extrasub.
 # FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF
-  sed "$ac_vpsub
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
 $extrasub
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 :t
 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s&@configure_input@&$configure_input&;t t
+s|@configure_input@|$ac_sed_conf_input|;t t
 s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
 s&@srcdir@&$ac_srcdir&;t t
 s&@abs_srcdir@&$ac_abs_srcdir&;t t
 s&@top_srcdir@&$ac_top_srcdir&;t t
@@ -3175,21 +3384,28 @@ s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
 s&@INSTALL@&$ac_INSTALL&;t t
 s&@MKDIR_P@&$ac_MKDIR_P&;t t
 $ac_datarootdir_hack
-" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
 
 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
   { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
   { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+  { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined." >&5
-echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined." >&2;}
 
   rm -f "$tmp/stdin"
   case $ac_file in
-  -) cat "$tmp/out"; rm -f "$tmp/out";;
-  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
-  esac
+  -) cat "$tmp/out" && rm -f "$tmp/out";;
+  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+  esac \
+  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
  ;;
 
 
@@ -3204,6 +3420,11 @@ _ACEOF
 chmod +x $CONFIG_STATUS
 ac_clean_files=$ac_clean_files_save
 
+test $ac_write_fail = 0 ||
+  { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+
 
 # configure is writing to config.log, and then calls config.status.
 # config.status does its own redirection, appending to config.log.
@@ -3225,4 +3446,8 @@ if test "$no_create" != yes; then
   # would make configure fail if this is the last instruction.
   $ac_cs_success || { (exit 1); exit 1; }
 fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
 
diff --git a/testsuite/configure.ac b/testsuite/configure.ac
index 655ef45c..5166d226 100644
--- a/testsuite/configure.ac
+++ b/testsuite/configure.ac
@@ -1,7 +1,7 @@
 dnl configure.ac --- autoconf input file for systemtap testsuite
 dnl Process this file with autoconf to produce a configure script.
 
-AC_INIT([systemtap], 0.9.9, systemtap@sources.redhat.com, systemtap)
+AC_INIT([systemtap], 1.0, systemtap@sources.redhat.com, systemtap)
 
 AC_PREREQ(2.59)
 AC_CONFIG_AUX_DIR(..)