diff options
| -rw-r--r-- | contrib/nova-CC-installer.sh | 481 |
1 files changed, 0 insertions, 481 deletions
diff --git a/contrib/nova-CC-installer.sh b/contrib/nova-CC-installer.sh deleted file mode 100644 index f42b6f49a..000000000 --- a/contrib/nova-CC-installer.sh +++ /dev/null @@ -1,481 +0,0 @@ -#!/bin/bash - -# Copyright (c) 2010 OpenStack, LLC. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at - -# http://www.apache.org/licenses/LICENSE-2.0 - -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or -# implied. - -# See the License for the specific language governing permissions and -# limitations under the License. - -# Written by Wayne A. Walls (dubsquared) with the amazing help of Jordan Rinke (JordanRinke), Vish Ishaya (vishy), -# and a lot of input from the fine folks in #openstack on irc.freenode.net! - -# Please contact script maintainers for questions, comments, or concerns: -# Wayne -> wayne@openstack.org -# Jordan -> jordan@openstack.org - -# This script is intended to be ran on a fresh install on Ubuntu 10.04 64-bit. Once ran with -# the appropriate variables, will produce a fully functioning Nova Cloud Controller. I am working on -# getting this working on all flavors of Ubuntu, and eventually RPM based distros. Please feel free -# to reach out to script maintainers for anything that can be done better. I'm pretty new to this scripting business -# so I'm sure there is room for improvement! - -#Usage: bash nova-CC-installer.sh - -#This is a Linux check -if [ `uname -a | grep -i linux | wc -l` -lt 1 ]; then -echo "Not Linux, not compatible." -exit 1 -fi - -#Compatible OS Check - DEB_OS=`cat /etc/issue | grep -i 'ubuntu'` - RH_OS=`cat /etc/issue | grep -i 'centos'` - if [[ ${#DEB_OS} -gt 0 ]] ; then - echo "Valid OS, continuing..." - CUR_OS="Ubuntu" - elif [[ ${#RH_OS} -gt 0 ]] ; then - echo "Unsupported OS, sorry!" - CUR_OS="CentOS" - exit 1 - else - echo "Unsupported OS, sorry!" - CUR_OS="Unknown" - exit 1 - fi - echo $CUR_OS detected! - - #Set up log file for debugging -LOGFILE=/var/log/nova/nova-install.log -mkdir /var/log/nova -touch /var/log/nova/nova-install.log - -echo "Nova Cloud Controller install script v1.0" -echo -echo "Setting up the Nova cloud controller is a multi-step process. After you seed information, \ -the script will take over and finish off the install for you. Full log of commands will be available at \ -/var/log/nova/nova-install.log" - -read -p "Press any key to continue..." -n1 -s -echo - -#Setting up sanity check function -valid_ipv4(){ - newmember=$(echo $1 | egrep '^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$'); - members=$(echo $newmember | tr "." "\n"); - memcount=$(echo $newmember | tr "." "\n" | wc -l); - if [ $memcount -ne 4 ]; then - echo "fail"; - exit; - fi - for i in $members; do - if [ $i -lt 0 ] || [ $i -gt 255 ]; then - echo "fail"; - exit; - fi; - done; - echo "success"; -} - -#Enforcing root user to execute the script -USER=root -USER2=`whoami` - - if [ $USER != $USER2 ]; then - echo "Please run this as the user, 'root'!"; exit 1 - else - echo -fi - -echo - -echo -echo "Step 1: Setting up the database." -#mySQL only for now, will update to include others in next release - - -echo "mySQL User Config" -echo "#################" - -#Setting up mySQL root password, and verify -while true; do - read -s -p "Desired mySQL Password: " MYSQL_PASS - echo ""; - read -s -p "Verify password: " MYSQL_PASS2 - echo ""; - - if [ $MYSQL_PASS != $MYSQL_PASS2 ] - then - echo "Passwords do not match...try again."; - continue; - fi - break; -done - -cat <<MYSQL_PRESEED | debconf-set-selections -mysql-server-5.1 mysql-server/root_password password $MYSQL_PASS -mysql-server-5.1 mysql-server/root_password_again password $MYSQL_PASS -mysql-server-5.1 mysql-server/start_on_boot boolean true -MYSQL_PRESEED -echo - -echo "Step 2: Setting up the controller configuration." -echo "This includes setting the S3 IP, RabbitMQ IP, Cloud Controller IP, and mySQL host IP" - -echo "Nova Cloud Controller Configuration" -echo "###################################" -sleep 1 - -#Configuring S3 Host IP -set -o nounset -echo - -debug=":" -debug="echo" - -echo - -#Grabs the first real IP of ifconfig, and set it as the default entry -default=`/sbin/ifconfig -a | egrep '.*inet ' | head -n 1|perl -pe 's/.*addr:(.+).*Bcast.*/$1/g' | tr -d " "` - -while true; do -read -p "S3 Host IP (Default is $default -- ENTER to accept):" -e t1 -if [ -n "$t1" ] -then - S3_HOST_IP="$t1" -else - S3_HOST_IP="$default" -fi -if [ $(valid_ipv4 $S3_HOST_IP) == "fail" ]; then - echo "You have entered an invalid IP address, please try again." - continue -fi -break; -done; - -echo -echo " S3 Host IP set as \"$S3_HOST_IP\"" - -#Configuring RabbitMQ IP -set -o nounset -echo - -debug=":" -debug="echo" - -echo - -#default=`/sbin/ifconfig -a | egrep '.*inet ' | head -n 1|perl -pe 's/.*addr:(.+).*Bcast.*/$1/g' | tr -d " "` -while true; do -read -p "RabbitMQ Host IP (Default is $default -- ENTER to accept): " -e t1 -if [ -n "$t1" ] -then - RABBIT_IP="$t1" -else - RABBIT_IP="$default" -fi - -if [ $(valid_ipv4 $RABBIT_IP) == "fail" ]; then - echo "You have entered an invalid IP address, please try again." - continue -fi -break; -done; - -echo -echo " RabbitMQ Host IP set as \"$RABBIT_IP\"" - -echo "There is an issue bypassing the rabbit package splash screen, so installing here and allowing you to proceed. There is currently no \ -way to background/preseed this, so it will output to terminal..." - -echo -sleep 5 -apt-get -y install rabbitmq-server -echo - -#Configuring Cloud Controller Host IP -set -o nounset -echo - -debug=":" -debug="echo" - -echo - -#default=`/sbin/ifconfig -a | egrep '.*inet ' | head -n 1|perl -pe 's/.*addr:(.+).*Bcast.*/$1/g' | tr -d " "` -while true; do -read -p "Cloud Controller Host IP (Default is $default -- ENTER to accept): " -e t1 -if [ -n "$t1" ] -then - CC_HOST_IP="$t1" -else - CC_HOST_IP="$default" -fi - -if [ $(valid_ipv4 $CC_HOST_IP) == "fail" ]; then - echo "You have entered an invalid IP address, please try again." - continue -fi -break; -done; - -echo -echo " Cloud Controller Host IP set as \"$CC_HOST_IP\"" - -#Configuring mySQL Host IP -set -o nounset -echo - -debug=":" -debug="echo" - - -echo - -#default=`/sbin/ifconfig -a | egrep '.*inet ' | head -n 1|perl -pe 's/.*addr:(.+).*Bcast.*/$1/g' | tr -d " "` -while true; do -read -p "mySQL Host IP (Default is $default -- ENTER to accept): " -e t1 -if [ -n "$t1" ] -then - MYSQL_HOST_IP="$t1" -else - MYSQL_HOST_IP="$default" -fi - -if [ $(valid_ipv4 $MYSQL_HOST_IP) == "fail" ]; then - echo "You have entered an invalid IP address, please try again." - continue -fi -break; -done; - -echo -echo "mySQL Host IP set as \"$MYSQL_HOST_IP\"" - -echo - -echo "Step 3: Building the network for your controller." - -echo "Here you will set the network range that ALL your projects will reside in. This is typically \ -a large block such as a /12. You will also choose how many IPs in this block are availible for use." - -echo - -echo "Nova Network Setup" -echo "##################" - -echo - -#Set network range and sanity check - -while true; do -read -p "Controller network range for ALL projects (normally x.x.x.x/12):" FIXED_RANGE -IP=$(echo $FIXED_RANGE | awk -F/ '{print $1}'); -CIDR=$(echo $FIXED_RANGE | awk -F/ '{print $2}' | perl -pe 'if(!($_>=1 && $_<=32)){undef $_;}'); -if [ $(valid_ipv4 $IP) == "fail" ] || [ -z "$CIDR" ] -then - echo "You failed at entering a correct range, try again" - continue -fi; - -break; -done; - -while true; do -read -p "Total amount of usable IPs for ALL projects:" NETWORK_SIZE -if [ ! "$( echo $NETWORK_SIZE | egrep '^[0-9]{1,9}$' )" ]; -then echo "Not a valid entry, please try again" -continue -fi -break; -done; - -echo - -echo "Step 4: Creating a project for Nova" - -echo "You will choose an admin for the project, and also name the project here. \ -Also, you will build out the network configuration for the project." -sleep 1 -echo - -read -p "Nova project user name:" NOVA_PROJECT_USER -read -p "Nova project name:" NOVA_PROJECT - -while true; do -read -p "Desired network + CIDR for project (normally x.x.x.x/24):" PROJECT_CIDR - if [ ! "$( echo $PROJECT_CIDR | egrep '^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\/[0-9]{1,2}$' )" ]; - then echo "You failed at entering a correct range, try again" - continue -fi -break; -done; - -while true; do -read -p "How many networks for project:" NOVA_NETWORK_NUMBER -if [ ! "$( echo $NOVA_NETWORK_NUMBER | egrep '^[0-9]{1,3}$' )" ]; -then echo "You have not entered a valid network number, try again" -continue -fi -break; -done; - -while true; do -read -p "How many available IPs per project network:" IPS_PER_NETWORK -if [ ! "$( echo $IPS_PER_NETWORK | egrep '^[0-9]{1,9}$' )" ]; -then echo "You have not entered amount of IPs" -continue -fi -break; -done; - -echo - -echo "At this point, you've entered all the information needed to finish deployment of your controller!" -echo "Feel free to get some coffee, you have earned it!" -sleep 5 - -echo - -echo "Entering auto-pilot mode..." -sleep 2 - -echo - -#Package installation function, and sanity check - -echo "Installing packages" -echo "###################" - -install_package() { - for packages in $@ - do - printf "%-40s" "Installing package '$packages' ... " - if dpkg -l | egrep "^ii.* $packages " &>> $LOGFILE - then - echo "Already installed"; - continue; - fi - apt-get install -y $packages &>> $LOGFILE - if dpkg -l | egrep "^ii.* $packages " &>> $LOGFILE - then - echo "ok"; - else - echo "Failed"; - #exit -1 - fi - done -# return 0; -} - -REQUIRED_PACKAGES="python-software-properties" -install_package ${REQUIRED_PACKAGES} -add-apt-repository ppa:nova-core/ppa &>> $LOGFILE -add-apt-repository ppa:nova-core/trunk &>> $LOGFILE -apt-get update &>> $LOGFILE -REQUIRED_PACKAGES="mysql-server bzr nova-common nova-doc nova-api nova-network nova-objectstore nova-scheduler nova-compute unzip vim euca2ools dnsmasq open-iscsi kpartx gawk iptables ebtables user-mode-linux kvm libvirt-bin screen iscsitarget vlan curl python-twisted python-sqlalchemy python-mox python-greenlet python-carrot python-daemon python-eventlet python-gflags python-libvirt python-libxml2 python-routes python-mysqldb python-greenlet python-nova" -#REQUIRED_PACKAGES="mysql-server bzr nova-common nova-doc python-mysqldb python-greenlet python-nova nova-api nova-network nova-objectstore nova-scheduler nova-compute unzip vim euca2ools dnsmasq open-iscsi kpartx kvm gawk iptables ebtables user-mode-linux kvm libvirt-bin screen iscsitarget euca2ools vlan curl python-twisted python-sqlalchemy python-mox python-greenlet python-carrot python-daemon python-eventlet python-gflags python-libvirt python-libxml2 python-routes" -install_package ${REQUIRED_PACKAGES} - -echo "Finalizing mySQL setup" -echo "######################" - -sed -i 's/127.0.0.1/0.0.0.0/g' /etc/mysql/my.cnf -service mysql restart &>> $LOGFILE - -mysql -uroot -p$MYSQL_PASS -e "CREATE DATABASE nova;" -mysql -uroot -p$MYSQL_PASS -e "GRANT ALL PRIVILEGES ON *.* TO 'root'@'%' WITH GRANT OPTION;" -mysql -uroot -p$MYSQL_PASS -e "SET PASSWORD FOR 'root'@'%' = PASSWORD('$MYSQL_PASS');" -echo "...done..." - -echo "Setting up Nova configuration files" -echo "###################################" -sleep 1 - -# Passing info into config files -cat >> /etc/nova/nova.conf << NOVA_CONF_EOF ---s3_host=$S3_HOST_IP ---rabbit_host=$RABBIT_IP ---cc_host=$CC_HOST_IP ---ec2_url=http://$S3_HOST_IP:8773/services/Cloud ---fixed_range=$FIXED_RANGE ---network_size=$NETWORK_SIZE ---FAKE_subdomain=ec2 ---routing_source_ip=$CC_HOST_IP ---verbose ---sql_connection=mysql://root:$MYSQL_PASS@$MYSQL_HOST_IP/nova -NOVA_CONF_EOF - -/usr/bin/python /usr/bin/nova-manage user admin $NOVA_PROJECT_USER &>> $LOGFILE -/usr/bin/python /usr/bin/nova-manage project create $NOVA_PROJECT $NOVA_PROJECT_USER &>> $LOGFILE -/usr/bin/python /usr/bin/nova-manage network create $PROJECT_CIDR $NOVA_NETWORK_NUMBER $IPS_PER_NETWORK &>> $LOGFILE -echo "...done..." - - -echo "Generating Nova credentials" -echo "###########################" - -mkdir -p /root/creds -/usr/bin/python /usr/bin/nova-manage project zipfile $NOVA_PROJECT $NOVA_PROJECT_USER /root/creds/novacreds.zip &>> $LOGFILE -sleep 3 -unzip -d /root/creds /root/creds/novacreds.zip &>> $LOGFILE -. /root/creds/novarc -cat /root/creds/novarc >> ~/.bashrc -sed -i.bak "s/127.0.0.1/$CC_HOST_IP/g" /root/creds/novarc -echo "...done..." - -###### -####This is where the bridge info will go for other network managers -###### - -echo "#################NOTE#####NOTE#####NOTE#####NOTE#####NOTE#####NOTE#################" -echo "#Be sure to source your credential file into your environment after config changes#" -echo "###########################e.g. source /root/creds/novarc##########################" -sleep 1 - - -#Sourcing creds file and restarting all Nova services -. /root/creds/novarc -sleep 1 -restart libvirt-bin &>> $LOGFILE; service nova-api restart &>> $LOGFILE; service nova-scheduler restart &>> $LOGFILE; service nova-network restart &>> $LOGFILE; service nova-objectstore restart &>> $LOGFILE; service nova-compute restart &>> $LOGFILE - -echo "Ensure all five Nova services are running" -echo "#########################################" -ps aux | grep -i nova -sleep 5 - -echo "Setup default ICMP and SSH access to your future VMs" -echo "####################################################" - -echo "Allowing ping and SSH to your running instances" -euca-authorize -P icmp -t -1:-1 default &>> $LOGFILE -euca-authorize -P tcp -p 22 default &>> $LOGFILE -echo "...done..." - -echo "######################################################################" -echo "#You /MUST/ re-source your 'novarc' to use the API commands since the#" -echo "##script cannot pass the source information out of it's own process###" -echo "######################################################################" - -#Only one dnsmasq process starts, supposed to two running at different priorities. This fixes that...possible bug. -killall dnsmasq -service nova-network restart &>> $LOGFILE - -#Needed for KVM to initialize, VMs run in qemu mode otherwise and is very slow -chgrp kvm /dev/kvm -chmod g+rwx /dev/kvm -echo -echo 'The next thing you are going to want to do it get a VM to test with. You can find a test VM how-to, and read more about custom image creation at "http://nova.openstack.org/adminguide/multi.node.install.html" and "http://wiki.openstack.org/GettingImages' -echo -echo 'Enjoy your new private cloud!' - -#If you run into any problems, please feel free to contact the script maintainers. -#You can also get assistance by stopping by irc.freenode.net - #openstack, sending a message to the OpenStack Users maillist - openstack@lists.launchpad.net, or posting at "https://answers.launchpad.net/openstack" |