summaryrefslogtreecommitdiffstats
path: root/support/include
Commit message (Collapse)AuthorAgeFilesLines
* libnfs.a: Fix API for getfh() & friendsChuck Lever2010-09-161-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is more of a clean-up than a behavioral change. POSIX requires that a "struct sockaddr" is the same size as a "struct sockaddr_in". Therefore, a variable or field of type "struct sockaddr" cannot contain an AF_INET6 address. However, "struct sockaddr *" is often used to reference a generic (ie non-address family specific) socket address, generating some confusion about this. The nfsctl_arg struct uses a struct sockaddr (not a pointer) to pass the client's IP address to the kernel. This means the legacy nfsctl() kernel API can never support IPv6. Fortunately for us, this legacy interface was replaced by a text-based cache interface a few years back. We don't need to support non-AF_INET addresses here. The getfh() functions in nfs-utils provide a handy C API for the kernel's nfsctl interface. The getfh() functions still take a struct sockaddr *, though, and that can imply that a non-IPv4 address can be passed via this API. To make it abundantly clear that only IPv4 addresses can be used with this interface, change the synopses of getfh() and friends to take a struct sockaddr_in * instead of a struct sockaddr * . This makes these functions conform with other places in mountd and exportfs that already grok the difference between a struct sockaddr and a struct sockaddr_in. While we're here... Introduce some nice documenting comments for the get_fh() functions, and... Since mountd will support IPv6 in the near future, assert that the family of client addresses passed to this API is indeed AF_INET, in order to prevent non-AF_INET addresses from ever being passed to the legacy nfsctl() interface. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* getport: Recognize "rdma" and "rdma6" netidChuck Lever2010-09-091-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | The mount.nfs command must recognize the values of "rdma" and "rdma6" with the "proto=" mount option. Typically the mount.nfs command relies on libtirpc or getprotobyname(3) to recognize netids and translate them to protocol numbers. RFCs 5665 and 5666 define the "rdma" and "rdma6" netids. IANA defines a specific port number for NFS over RDMA (20049), but has not provided a protocol name and number for RDMA transports, and is not expected to. The best we can do is translate these by hand, as needed, to get RDMA mount requests to the kernel without erroring out. Only the forward translation is needed until such time that "rdma" and "rdma6" start to appear in rpcbind registries. For now, the version and transport negotiation logic is skipped, avoiding rpcbind queries for RDMA mounts. Note: As of kernel 2.6.36, the kernel's NFS over RDMA transport capability does not support IPv6. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* Removed warnings from network.cSteve Dickson2010-08-091-0/+3
| | | | | | | network.c: In function 'nfs_verify_family': network.c:1366: warning: unused parameter 'family' Signed-off-by: Steve Dickson <steved@redhat.com>
* Removed warnings from cache.cSteve Dickson2010-08-091-1/+1
| | | | | | | | | | | | | | | | | | cache.c:812: warning: missing initializer cache.c:812: warning: (near initialization for 'cachelist[0].f') cache.c:813: warning: missing initializer cache.c:813: warning: (near initialization for 'cachelist[1].f') cache.c:814: warning: missing initializer cache.c:814: warning: (near initialization for 'cachelist[2].f') cache.c:815: warning: missing initializer cache.c:815: warning: (near initialization for 'cachelist[3].f') cache.c:816: warning: missing initializer cache.c:816: warning: (near initialization for 'cachelist[4].f') cache.c: In function 'cache_export_ent': cache.c:887: warning: comparison between signed and unsigned integer expressions cache.c:907: warning: comparison between signed and unsigned integer expressions Signed-off-by: Steve Dickson <steved@redhat.com>
* Remove warnings from svc_socket.cSteve Dickson2010-08-091-1/+1
| | | | | | | svc_socket.c: In function 'svcudp_socket': svc_socket.c:160: warning: unused parameter 'reuse' Signed-off-by: Steve Dickson <steved@redhat.com>
* nfs-utils: Fix C aliasing rules violation in nfs_getrpccaller()Chuck Lever2010-07-191-2/+2
| | | | | | | | | | | | | | | Squelch compiler warnings reported with -Wextra: In file included from statd.c:24: ../../support/include/rpcmisc.h: In function nfs_getrpccaller_in: ../../support/include/rpcmisc.h:58: warning: dereferencing type-punned pointer might break strict-aliasing rules ../../support/include/rpcmisc.h: In function nfs_getrpccaller: ../../support/include/rpcmisc.h:63: warning: dereferencing type-punned pointer might break strict-aliasing rules Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* libexport.a: Remove unused hostent-based DNS helper functionsChuck Lever2010-06-221-5/+0
| | | | | | | | | | | Clean up: Get rid of hostent-based DNS helper functions in libexport.a that have been replaced by addrinfo-based DNS helpers. None of the original code remains, so replace the copyright notice as well. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* libexport.a: Replace matchhostname()Chuck Lever2010-06-221-2/+0
| | | | | | | | | | | | | | | | | So that exportfs can eventually support IPv6 addresses, copy statd's getaddrinfo(3)-based matchhostname to exportfs, with adjustments for dealing with export wildcards and netgroups. Until exportfs has full IPv6 support, however, we want to ensure that IPv6 addresses continue to remain blocked in the address comparison code used by exportfs. At a later point we'll replace much of this with the generic functions in sockaddr.h. Since it contains special logic for handling wildcard and netgroups, this function is specialized for exportfs, and does not belong in one of the shared libraries. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* libexport.a: Make export_add() staticChuck Lever2010-06-221-1/+0
| | | | | | | | Clean up: export_add() is not called from outside of export.c, so make it a static helper. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* libexport.a: Make export_read() return voidChuck Lever2010-06-221-1/+1
| | | | | | | | Clean up: export_read()'s return value is always zero, and its only caller never checks it. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* mountd: Replace "struct hostent" with "struct addrinfo"Chuck Lever2010-06-221-7/+10
| | | | | | | | | | | | | | | | | | | struct hostent can store either IPv4 or IPv6 addresses, but it can't store both address families concurrently for the same host. Neither can hostent deal with parts of socket addresses that are outside of the sin{,6}_addr field. Replace the use of "struct hostent" everywhere in libexport.a, mountd, and exportfs with "struct addrinfo". This is a large change, but there are so many strong dependencies on struct hostent that this can't easily be broken into smaller pieces. One benefit of this change is that hostent_dup() is no longer required, since the results of getaddrinfo(3) are already dynamically allocated. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* libexport.a: Add helpers to manage DNS lookupsChuck Lever2010-06-221-0/+13
| | | | | | | | | | | | | | | Introduce DNS query helpers based on getaddrinfo(3) and getnameinfo(3). These will eventually replace the existing hostent-based functions in support/export/hostname.c. Put some of these new helpers to immediate use, where convenient. As they are part of libexport.a, I've added the forward declarations for these new functions in exportfs.h rather than misc.h, where the hostent-based forward declarations are currently. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* mountd/exportfs: Make m_addrlist field a nfs_sockaddrChuck Lever2010-05-051-1/+48
| | | | | | | | | | | | | | | | | | | | | | | | To store non-AF_INET addresses in the nfs_client structure, we need to use more than in_addr for the m_addrlist field. Make m_addrlist larger, then add a few helper functions to handle type casting and array indexing cleanly. We could treat the nfs_client address list as if all the addresses in the list were the same family. This might work for MCL_SUBNETWORK type nfs_clients. However, during the transition to IPv6, most hosts will have at least one IPv4 and one IPv6 address. For MCL_FQDN, I think we need to have the ability to store addresses from both families in one nfs_client. Additionally, IPv6 scope IDs are not part of struct sin6_addr. To support link-local IPv6 addresses and the like, a scope ID must be stored. Thus, each slot in the address list needs to be capable of storing an entire socket address, and not simply the network address part. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* libexport.a: Clean up client_add()Chuck Lever2010-05-051-1/+0
| | | | | | | | | | | Clean up: client_add()'s current callers never set unknown m_type values, so the m_type check is unnecessary. All of client_add()'s callers are in the same source file where it is defined, so make it a static helper function. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* Remove some warnings that were introduced by commit 6ca440cSteve Dickson2010-04-081-0/+2
| | | | Signed-off-by: Steve Dickson <steved@redhat.com>
* libexport.a: Clean up client_compose() and client_member()Chuck Lever2010-03-221-1/+2
| | | | | | | | Clean up: Replace outdated comments, and fix some function declarations. Use proper type for a couple of automatic variables. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* libexport.a: Remove dead codeChuck Lever2010-03-221-2/+0
| | | | | | | | Clean up: I can't find any call sites for client_find() or client_match(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* nfs-utils: add and use nfs_authsys_createJeff Layton2010-03-011-0/+3
| | | | | | | | | | | | | | | | | | The current mount, umount and showmount code uses authunix_create_default to get an auth handle. The one provided by glibc returned a truncated list of groups when there were more than 16 groups. libtirpc however currently does an abort() in this case, which causes the program to crash and dump core. nfs-utils just uses these auth handles for the MNT protocol, so the group list doesn't make a lot of difference here. Add a new function that creates an auth handle with a supplemental gids list that consists only of the primary gid. Have nfs-utils use that function anywhere that it currently uses authunix_create_default. Also, have the caller properly check for a NULL return from that function. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* nfsd: Disble NFS 4.1 functionality by defaultSteve Dickson2010-02-171-0/+6
| | | | | | | | | | | | Due to the fact the current kernel code do not completely conform to the NFS 4.1 RFC, this patch disable the 4.1 support on the server. To control this 41 functionality, the NFS41_SUPPORTED configuration variable now exist that will allow us to re enable the functionality without any code changes. Signed-off-by: Steve Dickson <steved@redhat.com>
* Teach nfs_compare_sockaddr() to handle NULL arguments.Steve Dickson2010-01-251-0/+4
| | | | | Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* tcpwrapper: Add support for IPv6Chuck Lever2010-01-171-1/+2
| | | | | | | | | | Assuming the tcp_wrappers library can actually support IPv6 addresses, here's a crack at IPv6 support in nfs-utils' TCP wrapper shim. Some reorganization is done to limit the number of times that @sap is converted to a presentation address string. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
* tcpwrapper: Eliminated shadowed declaration warningsChuck Lever2010-01-171-2/+1
| | | | | | | | | | | | | | | | | | | | | | Clean up: the use of identifiers called "access" and "daemon" shadow function declarations in unistd.h. Seen with "-Wextra -pedantic". tcpwrapper.c: In function haccess_add: tcpwrapper.c:112: warning: declaration of access shadows a global declaration /usr/include/unistd.h:288: warning: shadowed declaration is here tcpwrapper.c: In function good_client: tcpwrapper.c:161: warning: declaration of daemon shadows a global declaration /usr/include/unistd.h:953: warning: shadowed declaration is here tcpwrapper.c: In function check_default: tcpwrapper.c:212: warning: declaration of daemon shadows a global declaration /usr/include/unistd.h:953: warning: shadowed declaration is here good_client() is used only in support/misc/tcpwrapper.c, so make it static (and update its prototype to c99 standard form). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* tcp_wrapper: Clean up logit()Chuck Lever2010-01-171-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Eliminate these compiler warnings: tcpwrapper.c: In function logit tcpwrapper.c:225: warning: unused parameter procnum tcpwrapper.c:225: warning: unused parameter prognum Actually, @procnum is not used anywhere in our tcpwrapper.c, so let's just get rid of it. Since there is only one logit() call site in tcpwrapper.c, the macro wrapper just adds needless clutter. Let's get rid of that too. Finally, both mountd and statd now use xlog(), which adds an appropriate program name prefix to every message. Replace the open-coded syslog(2) call with an xlog() call in order to consistently identify the RPC service reporting the intrusion. Since logit() no longer references "deny_severity" and no nfs-utils caller sets either allow_severity or deny_severity, we remove them. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* tcp_wrappers: Use getifaddrs(3) if it is availableChuck Lever2010-01-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After glibc 2.3.3, getifaddrs(3) can return AF_INET6 addresses for local network interfaces. Using the library call is easier than trying to update the open code in from_local(), and means we have less to maintain in nfs-utils going forward. And, since from_local() can now support IPv6, change its synopsis to take a "struct sockaddr *" . Note that the original code discovers local addresses once. These days, with wifi, DHCP, and NetworkManager, the local network configuration can change dynamically over time. So, call getifaddrs() more often to ensure from_local() has up-to-date network configuration information. This implementation refreshes the list if from_local() has not been called in the last second. This is actually not terribly honerous. check_default() invokes from_local() only when the remote host is not in its access cache, or the access/deny files have changed. So new hosts will cause a refresh, but previously seen hosts (including localhost) should not. On the other hand, it still may not be often enough. After the first call, if only previously seen hosts attempt to access our daemons, from_local() would never be called, and the local list would never be updated. This might be possible during steady-state operation with a small number of servers and clients. It would also be nice if we could free the local interface address list at shutdown time, but that would be a lot of trouble for little gain. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
* statd: Support TI-RPC statd listenerChuck Lever2010-01-151-1/+6
| | | | | | | | | | | | | | | | | | | | If TI-RPC is available, use it to create statd's svc listener. If not, use the old function, rpc_init(), to create statd's listener. IPv6 can be supported if TI-RPC is available. In this case, /etc/netconfig is searched to determine which transports to advertise. Add the new listener creation API in libnfs.a since other components of nfs-utils (such as rpc.mountd) will eventually want to share it. A little re-arrangement of when the statd listener is created is done to make unregistration of the statd service more reliable. As it is now, the statd service is never unregistered when it exits. After it is gone, other programs usually hang when trying to access statd or see if it's running, since the registration is still there but statd itself does not respond. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
* libnsm.a: Add support for multiple lines in monitor record filesChuck Lever2010-01-151-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To support IPv6, statd must support multi-homed remote peers. For our purposes, "multi-homed peer" means that more than one unique IP address maps to the one canonical host name for that peer. An SM_MON request from the local lockd has a "mon_name" argument that statd reverse maps to a canonical hostname (ie the A record for that host). statd assumes the canonical hostname is unique enough that it stores the callback data for this mon_name in a file named after that canonical hostname. Because lockd can't distinguish between two unique IP addresses that may be from the same physical host, the kernel can hand statd a mon_name that maps to the same canonical hostname as some previous mon_name. So that the kernel can keep this instance of the mon_name unique, it creates a fresh priv cookie for each new address. Note that a mon_name can be a presentation address string, or the caller_name string sent in each NLMPROC_LOCK request. There's nothing that requires the caller_name to be a fully-qualified hostname, thus it's uniqueness is not guaranteed. The current design of statd assumes that canonical hostnames will be unique enough. When a mon_name for a fresh SM_MON request maps to the same canonical hostname as an existing monitored peer, but the priv cookie is new, statd will try to write the information for the fresh request into an existing monitor record file, wiping out the contents of the file. This is because the mon_name/cookie combination won't match any record statd already has. Currently, statd doesn't check if a record file already exists before writing into it. statd's logic assumes that the svc routine has already checked that no matching record exists in the in-core monitor list. And, it doesn't use O_EXCL when opening the record file. Not only is the old data in that file wiped out, but statd's in-core monitor list will no longer match what's in the on-disk monitor list. Note that IPv6 isn't needed to exercise multi-homed peer support. Any IPv4 peer that has multiple addresses that map to its canonical hostname will trigger this behavior. However, this scenario will become quite common when all hosts on a network automatically get both an IPv4 address and an IPv6 address. I can think of a few ways to address this: 1. Replace the current on-disk format with a database that has a uniqueness constraint on the monitor records 2. Create a new file naming scheme; eg. one that uses a truly unique name such as a hash generated from the mon_name, my_name, and priv cookie 3. Support multiple lines in each monitor record file Since statd's on-disk format constitutes a formal API, options 1 and 2 are right out. This patch implements option 3. There are two parts: adding a new line to an existing file; and deleting a line from a file with more than one line. Interestingly, the existing code already supports reading more than one line from these files, so we don't need to add extra code here to do that. One file may contain a line for every unique mon_name / priv cookie where the mon_name reverse maps to the same canonical hostname. We use the atomic write facility added by a previous patch to ensure the on-disk monitor record list is updated atomically. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
* nfs-utils: Collect socket address helpers into one locationChuck Lever2010-01-152-11/+238
| | | | | | | | | | | | | Introduce generic helpers for managing socket addresses. These are general enough that they are useful for pretty much any component of nfs-utils. We also include the definition of nfs_sockaddr here, so it can be shared. See: https://bugzilla.redhat.com/show_bug.cgi?id=448743 Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
* libnsm.a: Add RPC construction helper functionsChuck Lever2010-01-151-0/+25
| | | | | | | | | | | | | | | | | | | To manage concurrency, both statd and sm-notify construct raw RPC requests in socket buffers, and use a minimal request scheduler to send these requests and manage replies. Both statd and sm-notify open code the RPC request construction. Introduce helper functions that can construct and send raw NSMPROC_NOTIFY, NLM downcalls, and portmapper calls over a datagram socket, and receive and parse their replies. Support for IPv6 and RPCB_GETADDR is featured. This code (and the IPv6 support it introduces) can now be shared by statd and sm-notify, eliminating code and bug duplication. This implementation is based on what's in utils/statd/rmtcall.c now, but is wrapped up in a nice API and includes extra error checking. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
* exports: NFSv4 pseudoroot support routinesSteve Dickson2010-01-132-0/+17
| | | | | | | | | Create v4root exports for each directory that is a parent of an explicit export. Give each the minimal security required to traverse to any of its children. Signed-off-by: Steve Dickson <steved@redhat.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* exports: add new flag for NFSv4 pseudorootSteve Dickson2010-01-131-0/+1
| | | | Signed-off-by: Steve Dickson <steved@redhat.com>
* exports: let kernel decide which flags vary by flavorJ. Bruce Fields2010-01-132-1/+18
| | | | | | | | | Query the kernel to ask which flavors vary by pseudoflavor, and use that instead of a fixed constant. To allow the possibility of more flags varying by pseudoflavor, use the set/clear_flags functions for all options instead of setting some by hand. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* nfs-utils: make private cookie to hex conversion a library routineJeff Layton2010-01-121-0/+2
| | | | | Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* libnsm.a: Introduce common routines to handle persistent storageChuck Lever2010-01-122-0/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | rpc.statd and sm-notify access the same set of files under /var/lib/nfs/statd, but both have their own code base to handle this. They should share this code. In addition, the on-disk format used by statd and friends is considered a formal interface, so this new code will codify the API and provide documentation for it. The shared code handles switching from the default parent statd directory, reducing privileges at start-up, and managing the NSM state files, in addition to handling normal operations on the monitored host and notification lists on disk. The new code is simply a copy of the same logic that was used in rpc.statd and sm-notify, but wrapped in a nice API. There should be minimal behavioral and no on-disk format changes with the new libnsm.a code. The new code is more careful to check for bad corner cases. Occassionally this code may not allow an operation that was permitted in the past, but hopefully the error reporting has improved enough that it should be easy to track down any problems. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* libnfs.a: Provide shared helpers for managing netidsChuck Lever2009-12-111-0/+12
| | | | | | | | Introduce a couple of shared functions that can convert netids to protocol numbers and families, and back. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* statd: Replace note() with xlog() in rpc.statdChuck Lever2009-11-241-4/+0
| | | | | | | | | | | To facilitate code sharing between statd and sm-notify (and with other components of nfs-utils), replace sm-notify's nsm_log() with xlog(). Since opt_quiet is used in only a handful of insignificant cases, it is removed. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* Added wrappers around the setting of default valuesSteve Dickson2009-10-271-5/+0
| | | | | | | from the config file which will be compiled out when the config file is not enabled. Signed-off-by: Steve Dickson <steved@redhat.com>
* Introducing the parsing of both 'defaultvers' and 'defaultproto'Steve Dickson2009-10-221-0/+7
| | | | | | | | | | | config variables which will be used to set the the default version and network protocol. A global variable will be set for each option with the corresponding value. The value will be used as the initial value in the server negation. Signed-off-by: Steve Dickson <steved@redhat.com>
* Cleaned up some warnings in the mount config file code.Steve Dickson2009-08-271-0/+1
| | | | Signed-off-by: Steve Dickson <steved@redhat.com>
* Now that only the Section names are case-insensitiveSteve Dickson2009-08-161-0/+10
| | | | | | | | | the mount code has to make sure the the mount options given to the kernel are in the correct case. Fixed a couple of warnings on #ifndefs Signed-off-by: Steve Dickson <steved@redhat.com>
* Added an conditional argument to the Section namesSteve Dickson2009-08-161-1/+1
| | | | | | | | | | | | | | with the format being: [ Section <"argument"> ] This will help group similar functioning Section together. The argument is conditional but must be surrounded by the '"' characters. The new conf_get_section() interface can used to locate a Section by its Section name and/or argument. Signed-off-by: Steve Dickson <steved@redhat.com>
* Move idmapd's configuration file parsing routines intoSteve Dickson2009-08-162-1/+69
| | | | | | | the shared libnfs.a library, making them available to\ other daemons and programs. Signed-off-by: Steve Dickson <steved@redhat.com>
* nfs-utils: clean up NFSCTL_* macros for handling protocol bitsJeff Layton2009-08-011-4/+11
| | | | | | | | | | They are a little hard to follow currently. Clean them up and add new macros that can set these bits in addition to the ones that unset them. Also add a new macro that reports when any valid protocol bit is set. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* nfs-utils: move nfssvc.c to nfsd dir and clean up linking of nfsdJeff Layton2009-08-011-1/+0
| | | | | | | | | | rpc.nfsd is the only user of nfssvc.c, so we might as well move it out of libnfs.a. Also, don't link in libexport.a and libmisc.a, they aren't needed. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* support: Introduce sockaddr helpers to get and set IP port numbersChuck Lever2009-07-141-0/+10
| | | | | | | | | | Introduce address family-agnostic functions that get and set IP port numbers in socket addresses. We can already replace a few similar functions in the mount command, and a few more will come up with statd and sm-notify. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* getport: Clear shared error fields before trying rpcbind queriesChuck Lever2009-07-141-0/+9
| | | | | | | | | Some RPC errors set fields in rpc_createerr.cf_error in addition to cf_stat. Be sure to clear _all_ error fields in rpc_createerr each time through the rpcbind API. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* getport: Remove unneeded @salen argumentsChuck Lever2009-07-141-3/+1
| | | | | | | | Clean up: Now that getnameinfo(3) is no longer used, the @salen argument to nfs_sockaddr2universal() is no longer needed. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* utils/nfsd: add support for minorvers4Benny Halevy2009-05-042-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | minorvers4 can be used to either enable or disable nfsv4.x. If minorvers4 is a positive integer n, in the allowed range (only minorversion 1 is supported for now), the string "+4.n" is appended to the versions string written onto /proc/fs/nfsd/versions. Correspondingly, if minorver4 is a negative integer -n, the string "-4.n" is written. With the default value, minorvers4==0, the minor version setting is not changed. Note that unlike the protocol versions 2, 3, or 4. The minor version setting controls the *maximum* minor version nfsd supports. Particular minor version cannot be controlled on their own. With only minor version 1 supported at the moment the difference doesn't matter, but for future minor versions greater than 1, enabling minor version X will enable support for all minor versions 1 through X. Disabling minor version X will disable support for minor versions X and up, enabling 1 through X-1. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* support: Provide an API for creating a privileged RPC clientChuck Lever2009-04-181-1/+10
| | | | | | | | | | | | | | We needed to guarantee that some RPC programs, such as PMAP, got an unprivileged port, to prevent exhausting the local privileged port space sending RPC requests that don't need such privileges. nfs_get_rpcclient() provides that feature. However, some RPC programs, such as MNT and UMNT, require a privileged port. So, let's provide an additional API for this that also supports IPv6 and setting a destination port. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* Mountd should use separate lockfilesBen Myers2009-04-031-0/+9
| | | | | | | | | | | | | | | | Mountd keeps file descriptors used for locks separate from those used for io and seems to assume that the lock will only be released on close of the file descriptor that was used with fcntl. Actually the lock is released when any file descriptor for that file is closed. When setexportent() is called after xflock() he closes and reopens the io file descriptor and defeats the lock. This patch fixes that by using a separate file for locking, cleaning them up when finished. Signed-off-by: Ben Myers <bpm@sgi.com> Signed-off-by: Steve Dickson <steved@redhat.com>
* nfs-utils: Provide type-checked version of svc_getcaller()Chuck Lever2009-03-051-0/+9
| | | | | | | | | | | | | TI-RPC's version of the svc_getcaller() macro points to a sockaddr_in6, not a sockaddr_in, though for AF_INET callers, an AF_INET address resides there. To squelch compiler warnings when the TI-RPC version of the svc_req structure is used, add inline helpers with appropriate type casting. Note that tcp_wrappers support only AF_INET addresses for now. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-25 08:35:45 +0000