#
# Set up some defaults.
#
STLIBEXT=.a
# Default to being unable to build shared libraries.
SHLIBEXT=.so-nobuild
SHLIBVEXT=.so.v-nobuild
SHLIBSEXT=.so.s-nobuild
# Most systems support profiled libraries.
PFLIBEXT=_p.a
# Most systems install shared libs as mode 644, etc. while hpux wants 755
INSTALL_SHLIB='$(INSTALL_DATA)'
# Most systems use the same objects for shared libraries and dynamically
# loadable objects.
DYNOBJEXT='$(SHLIBEXT)'
MAKE_DYNOBJ_COMMAND='$(MAKE_SHLIB_COMMAND)'
DYNOBJ_EXPDEPS='$(SHLIB_EXPDEPS)'
DYNOBJ_EXPFLAGS='$(SHLIB_EXPFLAGS)'
#
use_linker_init_option=no
use_linker_fini_option=no

STOBJEXT=.o
SHOBJEXT=.so
PFOBJEXT=.po
# Default for systems w/o shared libraries
CC_LINK_STATIC='$(CC) $(PROG_LIBPATH) $(CFLAGS) $(LDFLAGS)'
#
SHLIB_EXPORT_FILE_DEP='$(SHLIB_EXPORT_FILE)'
# This will do for most platforms, and we'll substitute for
# LDCOMBINE, SHLIB_EXPFLAGS, and LDCOMBINE_TAIL below.
MAKE_SHLIB_COMMAND=x
INIT_FINI_PREP=:

# Default to static or shared libraries?
default_static=no
default_shared=yes

# Set up architecture-specific variables.
case $krb5_cv_host in
alpha*-dec-osf*)
	SHLIBVEXT='.so.$(LIBMAJOR).$(LIBMINOR)'
	SHLIBSEXT='.so.$(LIBMAJOR)'
	SHLIBEXT=.so
	# Alpha OSF/1 doesn't need separate PIC objects
	SHOBJEXT=.o
	INIT_FINI_PREP=initfini=
	LDCOMBINE='$(CC) $(PTHREAD_CFLAGS) -shared -Wl,-expect_unresolved -Wl,\* -Wl,-update_registry -Wl,$(BUILDTOP)/so_locations -Wl,-soname -Wl,$(LIBPREFIX)$(LIBBASE)$(SHLIBSEXT) -Wl,-hidden -Wl,-input,osf1.exports $$initfini'
	SHLIB_EXPORT_FILE_DEP=osf1.exports
	use_linker_init_option=yes
	use_linker_fini_option=yes
	EXTRA_FILES="$EXTRA_FILES export"
	SHLIB_EXPFLAGS='-rpath $(SHLIB_RDIRS) $(SHLIB_DIRS) $(SHLIB_EXPLIBS)'
	PROFFLAGS=-pg
	RPATH_FLAG='-Wl,-rpath -Wl,'
	CC_LINK_SHARED='$(CC) $(PROG_LIBPATH) $(RPATH_FLAG)$(PROG_RPATH) $(CFLAGS) $(PTHREAD_CFLAGS) $(LDFLAGS)'
	if test "$krb5_cv_prog_gcc" = yes \
		&& test "$krb5_cv_gnu_ld" = yes; then
		# Really should check for gnu ld vs system ld, too.
		CC_LINK_STATIC='$(CC) $(PROG_LIBPATH) $(CFLAGS) $(PTHREAD_CFLAGS) $(LDFLAGS)'
	else
		# Need -oldstyle_liblookup to avoid picking up shared libs from
		# other builds.  OSF/1 / Tru64 ld programs look through the entire
		# library path for shared libs prior to looking through the
		# entire library path for static libs.
		CC_LINK_STATIC='$(CC) $(PROG_LIBPATH) -Wl,-oldstyle_liblookup $(CFLAGS) $(PTHREAD_CFLAGS) $(LDFLAGS)'
	fi
	# _RLD_ROOT hack needed to repoint "root" directory for purposes
	# of searching for shared libs, since RPATHs take precedence over
	# LD_LIBRARY_PATH.
	RUN_ENV='LD_LIBRARY_PATH=`echo $(PROG_LIBPATH) | sed -e "s/-L//g" -e "s/ /:/g"`$${LD_LIBRARY_PATH+:$$LD_LIBRARY_PATH}; export LD_LIBRARY_PATH; _RLD_ROOT=$(FAKEDEST):$${_RLD_ROOT+$$_RLD_ROOT}$${_RLD_ROOT-/}; export _RLD_ROOT;'
	;;

# HPUX *seems* to work under 10.20.
# 
# Note: "-Wl,+s" when building executables enables the use of the
# SHLIB_PATH environment variable for finding shared libraries 
# in non-standard directories.  If a non-standard search-path for
#  shared libraries is compiled into the executable (using 
# -Wl,+b,$KRB5_SHLIBDIR), then the order of "-Wl,+b,..." and "-Wl,+s" 
# on the commandline of the linker will determine which path
# (compiled-in or SHLIB_PATH) will be searched first.
#
# +I initproc routine gets called at load and unload time for
#    shl_load calls, but appears to never be called for link-time
#    specified libraries.
# +e sym exports symbol and supposedly prevents other symbols
#    from being exported, according to the man page, but the
#    latter bit doesn't actually seem to work
# -O +dpv should display any routines eliminated as unused, but -b
#	  apparently turns that off
*-*-hpux*)
	INSTALL_SHLIB='$(INSTALL)'
	SHLIBEXT=.sl
	SHLIBVEXT='.$(LIBMAJOR).$(LIBMINOR)'
	SHLIBSEXT='.$(LIBMAJOR)'
	RPATH_FLAG='-Wl,+b,'
	if test "$krb5_cv_prog_gcc" = yes; then
		PICFLAGS=-fPIC
		SHLIB_EXPFLAGS='-Wl,+s -Wl,+b,$(SHLIB_RDIRS) $(SHLIB_DIRS) $(SHLIB_EXPLIBS)'
		LDCOMBINE='gcc -fPIC -shared -Wl,+h,$(LIBPREFIX)$(LIBBASE)$(SHLIBSEXT) -Wl,-c,hpux10.exports'
	else
		PICFLAGS=+z
		SHLIB_EXPFLAGS='+s +b $(SHLIB_RDIRS) $(SHLIB_DIRS) $(SHLIB_EXPLIBS)'
		LDCOMBINE='ld -b +h $(LIBPREFIX)$(LIBBASE)$(SHLIBSEXT) -c hpux10.exports'
	fi
	CC_LINK_SHARED='$(CC) $(PROG_LIBPATH) -Wl,+s $(RPATH_FLAG)$(PROG_RPATH) $(CFLAGS) $(LDFLAGS)'
	CC_LINK_STATIC='$(CC) $(PROG_LIBPATH) $(CFLAGS) $(LDFLAGS)'
	RUN_ENV='SHLIB_PATH=`echo $(PROG_LIBPATH) | sed -e "s/-L//g" -e "s/ /:/g"`; export SHLIB_PATH;'
	SHLIB_EXPORT_FILE_DEP=hpux10.exports
	# Do *not* set use_linker_init_option=yes here, because in the
	# case where the library is specified at program link time, the
	# initialization function appears not to get called, only for
	# shl_load.  But for finalization functions, the shl_load case
	# is the one we care about.
	#
	# Not setting use_linker_init_option here should cause compilation
	# failures if the user tries to disable delayed initialization.
	use_linker_fini_option=yes
	;;

mips-sgi-irix6.3)	# This is a Kludge; see below
	SHLIBVEXT='.so.$(LIBMAJOR).$(LIBMINOR)'
	SHLIBSEXT='.so.$(LIBMAJOR)'
	SHLIBEXT=.so
	SHOBJEXT=.o
	# Kludge follows: (gcc makes n32 object files but ld expects o32, so we reeducate ld)
	if test "$krb5_cv_prog_gcc" = yes; then
		LDCOMBINE='ld -n32 -shared -ignore_unresolved -update_registry $(BUILDTOP)/so_locations -soname $(LIBPREFIX)$(LIBBASE)$(SHLIBSEXT)'
	else
		LDCOMBINE='ld -shared -ignore_unresolved -update_registry $(BUILDTOP)/so_locations -soname $(LIBPREFIX)$(LIBBASE)$(SHLIBSEXT)'
	fi
	SHLIB_EXPFLAGS='-rpath $(SHLIB_RDIRS) $(SHLIB_DIRS) $(SHLIB_EXPLIBS)'
	# no gprof for Irix...
	PROFFLAGS=-p
	RPATH_FLAG='-Wl,-rpath -Wl,'
	CC_LINK_SHARED='$(CC) $(PROG_LIBPATH) $(RPATH_FLAG)$(PROG_RPATH) $(CFLAGS) $(LDFLAGS)'
	CC_LINK_STATIC='$(CC) $(PROG_LIBPATH) $(CFLAGS) $(LDFLAGS)'
	# This grossness is necessary due to the presence of *three*
	# supported ABIs on Irix, and the precedence of the rpath over
	# LD_LIBRARY*_PATH.  Like OSF/1, _RLD*_ROOT needs to be set to
	# work around this lossage.
	#
	# Set the N32 and 64 variables first because the unqualified
	# variables affect all three and can cause the sed command to fail.
	#
	# This loop is to reduce the clutter a slight bit.
	add='`echo $(PROG_LIBPATH) | sed -e "s/-L//g" -e "s/ /:/g"`'
	RUN_ENV=
	for i in N32 64 ''; do
		RUN_ENV="${RUN_ENV+ $RUN_ENV}LD_LIBRARY${i}_PATH=$add\$\${LD_LIBRARY${i}_PATH+:\$\$LD_LIBRARY${i}_PATH}; export LD_LIBRARY${i}_PATH;"
		RUN_ENV="${RUN_ENV} _RLD${i}_ROOT=\$(FAKEDEST):\$\${_RLD${i}_ROOT+\$\${_RLD${i}_ROOT}}\$\${_RLD${i}_ROOT-/}; export _RLD${i}_ROOT;"
	done
	;;

mips-sgi-irix*)
	SHLIBVEXT='.so.$(LIBMAJOR).$(LIBMINOR)'
	SHLIBSEXT='.so.$(LIBMAJOR)'
	SHLIBEXT=.so
	SHOBJEXT=.o
	if test "$krb5_cv_prog_gcc" = yes; then
		LDCOMBINE_TAIL=""
		INIT_FINI_PREP="initfini="
	else
		use_linker_init_option=yes
		use_linker_fini_option=yes
		INIT_FINI_PREP='initfini=; for f in . $(LIBINITFUNC); do if test $$f = .; then :; else initfini="$$initfini -Wl,-init,$${f}__auxinit"; fi; done; for f in . $(LIBFINIFUNC); do if test $$f = .; then :; else initfini="$$initfini -Wl,-fini,$${f}"; fi; done'
		LDCOMBINE_TAIL='-Wl,-exports_file -Wl,$(SHLIB_EXPORT_FILE)'
	fi
	LDCOMBINE='$(CC) -shared -Wl,-ignore_unresolved -Wl,-update_registry -Wl,$(BUILDTOP)/so_locations -Wl,-soname -Wl,$(LIBPREFIX)$(LIBBASE)$(SHLIBSEXT) $$initfini'
	SHLIB_EXPFLAGS='-rpath $(SHLIB_RDIRS) $(SHLIB_DIRS) $(SHLIB_EXPLIBS)'
	# no gprof for Irix...
	PROFFLAGS=-p
	RPATH_FLAG='-Wl,-rpath -Wl,'
	CC_LINK_SHARED='$(CC) $(PROG_LIBPATH) $(RPATH_FLAG)$(PROG_RPATH) $(CFLAGS) $(LDFLAGS)'
	CC_LINK_STATIC='$(CC) $(PROG_LIBPATH) $(CFLAGS) $(LDFLAGS)'
	# This grossness is necessary due to the presence of *three*
	# supported ABIs on Irix, and the precedence of the rpath over
	# LD_LIBRARY*_PATH.  Like OSF/1, _RLD*_ROOT needs to be set to
	# work around this lossage.
	#
	# Set the N32 and 64 variables first because the unqualified
	# variables affect all three and can cause the sed command to fail.
	#
	# This loop is to reduce the clutter a slight bit.
	add='`echo $(PROG_LIBPATH) | sed -e "s/-L//g" -e "s/ /:/g"`'
	RUN_ENV=
	for i in N32 64 ''; do
		RUN_ENV="${RUN_ENV+ $RUN_ENV}LD_LIBRARY${i}_PATH=$add\$\${LD_LIBRARY${i}_PATH+:\$\$LD_LIBRARY${i}_PATH}; export LD_LIBRARY${i}_PATH;"
		RUN_ENV="${RUN_ENV} _RLD${i}_ROOT=\$(FAKEDEST):\$\${_RLD${i}_ROOT+\$\${_RLD${i}_ROOT}}\$\${_RLD${i}_ROOT-/}; export _RLD${i}_ROOT;"
	done
	;;

# untested...
mips-sni-sysv4)
	if test "$krb5_cv_prog_gcc" = yes; then
		PICFLAGS=-fpic
		LDCOMBINE='$(CC) -G -Wl,-h -Wl,$(LIBPREFIX)$(LIBBASE)$(SHLIBSEXT)'
	else
		PICFLAGS=-Kpic
		LDCOMBINE='$(CC) -G -h $(LIBPREFIX)$(LIBBASE)$(SHLIBSEXT)'
	fi
	SHLIB_EXPFLAGS='-R$(SHLIB_RDIRS) $(SHLIB_DIRS) $(SHLIB_EXPLIBS)'
	SHLIBEXT=.so
	SHLIBVEXT='.so.$(LIBMAJOR).$(LIBMINOR)'
	SHLIBSEXT='.so.$(LIBMAJOR)'
	RPATH_FLAG=-R
	CC_LINK_SHARED='$(CC) $(PROG_LIBPATH) $(RPATH_FLAG)$(PROG_RPATH) $(CFLAGS) $(LDFLAGS)'
	CC_LINK_STATIC='$(CC) $(PROG_LIBPATH) $(CFLAGS) $(LDFLAGS)'
	RUN_ENV='LD_LIBRARY_PATH=`echo $(PROG_LIBPATH) | sed -e "s/-L//g" -e "s/ /:/g"`; export LD_LIBRARY_PATH;'
	PROFFLAGS=-pg
	;;

mips-*-netbsd*)
	PICFLAGS=-fPIC
	SHLIBVEXT='.so.$(LIBMAJOR).$(LIBMINOR)'
	SHLIBSEXT='.so.$(LIBMAJOR)'
	SHLIBEXT=.so
	LDCOMBINE='ld -shared -soname $(LIBPREFIX)$(LIBBASE)$(SHLIBSEXT)'
	SHLIB_EXPFLAGS='-R$(SHLIB_RDIRS) $(SHLIB_DIRS) $(SHLIB_EXPLIBS)'
	RPATH_FLAG='-Wl,-rpath -Wl,'
	CC_LINK_SHARED='$(CC) $(PROG_LIBPATH) $(RPATH_FLAG)$(PROG_RPATH) $(CFLAGS) $(LDFLAGS)'
	CC_LINK_STATIC='$(CC) $(PROG_LIBPATH) $(CFLAGS) $(LDFLAGS)'
	RUN_ENV='LD_LIBRARY_PATH=`echo $(PROG_LIBPATH) | sed -e "s/-L//g" -e "s/ /:/g"`; export LD_LIBRARY_PATH;'
	PROFFLAGS=-pg
	;;

*-*-netbsd*)
	PICFLAGS=-fPIC
	SHLIBVEXT='.so.$(LIBMAJOR).$(LIBMINOR)'
	SHLIBEXT=.so
	LDCOMBINE='ld -Bshareable'
	SHLIB_EXPFLAGS='-R$(SHLIB_RDIRS) $(SHLIB_DIRS) $(SHLIB_EXPLIBS)'
	RPATH_FLAG=-R
	CC_LINK_SHARED='$(CC) $(PROG_LIBPATH) $(RPATH_FLAG)$(PROG_RPATH) $(CFLAGS) $(LDFLAGS)'
	CC_LINK_STATIC='$(CC) $(PROG_LIBPATH) $(CFLAGS) $(LDFLAGS)'
	RUN_ENV='LD_LIBRARY_PATH=`echo $(PROG_LIBPATH) | sed -e "s/-L//g" -e "s/ /:/g"`; export LD_LIBRARY_PATH;'
	PROFFLAGS=-pg
	;;

*-*-freebsd*)
	if test -x /usr/bin/objformat ; then
		objformat=`/usr/bin/objformat`
	else
		objformat="aout"
	fi
	PICFLAGS=-fpic
	if test "x$objformat" = "xelf" ; then
		SHLIBVEXT='.so.$(LIBMAJOR)'
		RPATH_FLAG='-Wl,-rpath -Wl,'
	else
		RPATH_FLAG=-R
		SHLIBVEXT='.so.$(LIBMAJOR).$(LIBMINOR)'
	fi
	CC_LINK_SHARED='$(CC) $(PROG_LIBPATH) $(RPATH_FLAG)$(PROG_RPATH) $(CFLAGS) $(LDFLAGS)'
	SHLIBEXT=.so
	LDCOMBINE='ld -Bshareable'
	SHLIB_EXPFLAGS='-R$(SHLIB_RDIRS) $(SHLIB_DIRS) $(SHLIB_EXPLIBS)'
	CC_LINK_STATIC='$(CC) $(PROG_LIBPATH) $(CFLAGS) $(LDFLAGS)'
	RUN_ENV='LD_LIBRARY_PATH=`echo $(PROG_LIBPATH) | sed -e "s/-L//g" -e "s/ /:/g"`; export LD_LIBRARY_PATH;'
	PROFFLAGS=-pg
	;;

*-*-openbsd*)
	PICFLAGS=-fpic
	SHLIBVEXT='.so.$(LIBMAJOR).$(LIBMINOR)'
	SHLIBEXT=.so
	LDCOMBINE='ld -Bshareable'
	SHLIB_EXPFLAGS='-R$(SHLIB_RDIRS) $(SHLIB_DIRS) $(SHLIB_EXPLIBS)'
	RPATH_FLAG=-R
	CC_LINK_SHARED='$(CC) $(PROG_LIBPATH) $(RPATH_FLAG)$(PROG_RPATH) $(CFLAGS) $(LDFLAGS)'
	CC_LINK_STATIC='$(CC) $(PROG_LIBPATH) $(CFLAGS) $(LDFLAGS)'
	RUN_ENV='LD_LIBRARY_PATH=`echo $(PROG_LIBPATH) | sed -e "s/-L//g" -e "s/ /:/g"`; export LD_LIBRARY_PATH;'
	PROFFLAGS=-pg
	;;

*-*-darwin* | *-*-rhapsody*)
	SHLIBVEXT='.$(LIBMAJOR).$(LIBMINOR).dylib'
	SHLIBSEXT='.$(LIBMAJOR).dylib'
	SHLIB_EXPFLAGS='$(SHLIB_DIRS) $(SHLIB_EXPLIBS)'
	SHLIBEXT=.dylib
	DYNOBJEXT=.so
	SHLIB_EXPORT_FILE_DEP=darwin.exports
	DYNOBJ_EXPDEPS='$(DYNOBJ_EXPDEPS_WITH_LOADER)'
	DYNOBJ_EXPFLAGS='$(SHLIB_DIRS) $(DYNOBJ_EXPLIBS_WITH_LOADER)'
	MAKE_DYNOBJ_COMMAND='$(CC) -bundle $(CFLAGS) -bundle_loader $(DYNOBJ_LOADER_PROG) $(LDFLAGS) -o $@ $$objlist $(DYNOBJ_EXPFLAGS) -exported_symbols_list darwin.exports'
	LDCOMBINE='$(CC) -undefined warning -dynamiclib -compatibility_version $(LIBMAJOR) -current_version $(LIBMAJOR).$(LIBMINOR) -install_name "$(KRB5_LIBDIR)/$(LIBPREFIX)$(LIBBASE)$(SHLIBVEXT)" $(CFLAGS) $(LDFLAGS)'
	CC_LINK_SHARED='$(CC) $(PROG_LIBPATH) -dynamic $(CFLAGS) $(LDFLAGS)'
	CC_LINK_STATIC='$(CC) $(PROG_LIBPATH) $(CFLAGS) $(LDFLAGS)'
	RUN_ENV='DYLD_LIBRARY_PATH=`echo $(PROG_LIBPATH) | sed -e "s/-L//g" -e "s/ /:/g"`; export DYLD_LIBRARY_PATH;'
	# We need some changes for *all* library builds on Darwin, too.
	# (Well, the KfM builds which generate .dylib files, at least.
	# They might not be needed for "dumb" UNIX builds with static
	# libraries, that just happen to be done on Darwin.)
	enable_static=yes
	enable_shared=no
	;;

*-*-solaris*)
	if test "$krb5_cv_prog_gcc" = yes; then
		PICFLAGS=-fPIC
		LDCOMBINE='$(CC) $(CFLAGS) -shared -h $(LIBPREFIX)$(LIBBASE)$(SHLIBSEXT)'
	else
		PICFLAGS=-KPIC
		# Solaris cc doesn't default to stuffing the SONAME field...
		LDCOMBINE='$(CC) $(CFLAGS) -dy -G -z text -h $(LIBPREFIX)$(LIBBASE)$(SHLIBSEXT) $$initfini'
		#
		case $krb5_cv_host in
		*-*-solaris2.[1-7] | *-*-solaris2.[1-7].*)
		    # Did Solaris 7 and earlier have a linker option for this?
		    ;;
		*)
		    INIT_FINI_PREP='initfini=; for f in . $(LIBINITFUNC); do if test $$f = .; then :; else initfini="$$initfini -Wl,-z,initarray=$${f}__auxinit"; fi; done; for f in . $(LIBFINIFUNC); do if test $$f = .; then :; else initfini="$$initfini -Wl,-z,finiarray=$$f"; fi; done'
		    use_linker_init_option=yes
		    use_linker_fini_option=yes
		    ;;
		esac
	fi
	SHLIBVEXT='.so.$(LIBMAJOR).$(LIBMINOR)'
	SHLIBSEXT='.so.$(LIBMAJOR)'
	SHLIBEXT=.so
	SHLIB_EXPFLAGS='-R$(SHLIB_RDIRS) $(SHLIB_DIRS) $(SHLIB_EXPLIBS)'
	PROFFLAGS=-pg
	RPATH_FLAG=-R
	CC_LINK_SHARED='$(PURE) $(CC) $(PROG_LIBPATH) $(RPATH_FLAG)$(PROG_RPATH) $(CFLAGS) $(LDFLAGS)'
	CC_LINK_STATIC='$(PURE) $(CC) $(PROG_LIBPATH) $(CFLAGS) $(LDFLAGS)'
	RUN_ENV='LD_LIBRARY_PATH=`echo $(PROG_LIBPATH) | sed -e "s/-L//g" -e "s/ /:/g"`; export LD_LIBRARY_PATH;'
	;;

*-*-sunos*)
	PICFLAGS=-fpic
	SHLIBVEXT='.so.$(LIBMAJOR).$(LIBMINOR)'
	SHLIBEXT=.so
	# The following grossness is to prevent relative paths from
	# creeping into the RPATH of an executable or library built
	# under SunOS; the explicit setting of LD_LIBRARY_PATH does
	# does not make it into the output file, while directories
	# passed by "-Ldirname" do.
	LDCOMBINE='LD_LIBRARY_PATH=`echo $(SHLIB_DIRS) | sed -e "s/-L//g" -e "s/ /:/g"` ld -dp -assert pure-text'
	SHLIB_EXPFLAGS='-L$(SHLIB_RDIRS) $(SHLIB_EXPLIBS)'
	PROFFLAGS=-pg
	# ick.
	RPATH_FLAG=-L
	CC_LINK_SHARED='LD_LIBRARY_PATH=`echo $(PROG_LIBPATH) | sed -e "s/-L//g" -e "s/ /:/g"` $(PURE) $(CC) $(RPATH_FLAG)$(PROG_RPATH) $(CFLAGS) $(LDFLAGS)'
	CC_LINK_STATIC='LD_LIBRARY_PATH=`echo $(PROG_LIBPATH) | sed -e "s/-L//g" -e "s/ /:/g` $(PURE) $(CC) $(CFLAGS) $(LDFLAGS)'
	RUN_ENV='LD_LIBRARY_PATH=`echo $(PROG_LIBPATH) | sed -e "s/-L//g" -e "s/ /:/g"`; export LD_LIBRARY_PATH;'
	;;
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
	PICFLAGS=-fPIC
	SHLIBVEXT='.so.$(LIBMAJOR).$(LIBMINOR)'
	SHLIBSEXT='.so.$(LIBMAJOR)'
	SHLIBEXT=.so
	# Linux ld doesn't default to stuffing the SONAME field...
	# Use objdump -x to examine the fields of the library
	LDCOMBINE='$(CC) -shared -fPIC -Wl,-h,$(LIBPREFIX)$(LIBBASE)$(SHLIBSEXT)'
	# 
	LDCOMBINE_TAIL='-Wl,--version-script binutils.versions && $(PERL) -w $(SRCTOP)/util/export-check.pl $(SHLIB_EXPORT_FILE) $@'
	SHLIB_EXPORT_FILE_DEP=binutils.versions
	# For cases where we do have dependencies on other libraries
	# built in this tree...
	SHLIB_EXPFLAGS='-Wl,-R$(SHLIB_RDIRS) $(SHLIB_DIRS) $(SHLIB_EXPLIBS)'
	PROFFLAGS=-pg
	RPATH_FLAG='-Wl,-rpath -Wl,'
	CC_LINK_SHARED='$(CC) $(PROG_LIBPATH) $(RPATH_FLAG)$(PROG_RPATH) $(CFLAGS) $(LDFLAGS)'
	CC_LINK_STATIC='$(CC) $(PROG_LIBPATH) $(CFLAGS) $(LDFLAGS)'
	RUN_ENV='LD_LIBRARY_PATH=`echo $(PROG_LIBPATH) | sed -e "s/-L//g" -e "s/ /:/g"`; export LD_LIBRARY_PATH;'

	## old version:
	# Linux libc does weird stuff at shlib link time, must be
	# explicitly listed here.  This also makes it get used even
	# for the libraries marked as not having any dependencies; while
	# that's not strictly correct, the resulting behavior -- not adding
	# extra -R directories -- is still what we want.
	#LDCOMBINE='ld -shared -h $(LIBPREFIX)$(LIBBASE)$(SHLIBSEXT)'
	#LDCOMBINE_TAIL="-lc"
	#SHLIB_EXPFLAGS='-R$(SHLIB_RDIRS) $(SHLIB_DIRS) $(SHLIB_EXPLIBS)'

	;;

*-*-aix5*)
	SHLIBVEXT='.so.$(LIBMAJOR).$(LIBMINOR)'
	SHLIBEXT=.so
	# AIX doesn't need separate PIC objects
	SHOBJEXT=.o
	SHLIB_EXPFLAGS='  $(SHLIB_DIRS) $(SHLIB_EXPLIBS)'
	PROFFLAGS=-pg
	if test "$krb5_cv_prog_gcc" = "yes" ; then
	  wl_prefix=-Wl,
	  RPATH_FLAG='-Wl,-blibpath:'
	  LDCOMBINE='$(CC) -shared -v -o $@ $$objlist -nostartfiles -Xlinker -bgcbypass:1 -Xlinker -bfilelist -Xlinker -bM:SRE -Xlinker -bE:$(SHLIB_EXPORT_FILE) -Xlinker -bernotok -Xlinker -brtl $(SHLIB_EXPFLAGS) -lc $$initfini'
	else
	  wl_prefix=
	  RPATH_FLAG=-blibpath:
	  LDCOMBINE='/bin/ld -o $@ $$objlist -H512 -T512 -bnoentry -bgcbypass:1 -bnodelcsect -bfilelist -bM:SRE -bE:$(SHLIB_EXPORT_FILE) -bernotok -brtl $(SHLIB_EXPFLAGS) -lc $$initfini'
	fi
	# Assume initialization always delayed.
	INIT_FINI_PREP="wl=${wl_prefix}; "'i=1; initfini=; for f in . $(LIBFINIFUNC); do if test $$f != .; then initfini="$$initfini $${wl}-binitfini::$$f:$$i"; else :; fi; i=`expr $$i + 1`; done'
	use_linker_fini_option=yes
	MAKE_SHLIB_COMMAND="${INIT_FINI_PREP} && ${LDCOMBINE}"
	RPATH_TAIL=:/usr/lib:/lib
	CC_LINK_SHARED='$(CC) $(PROG_LIBPATH) $(RPATH_FLAG)$(PROG_RPATH):'"$RPATH_TAIL"' $(CFLAGS) $(LDFLAGS)'
	CC_LINK_STATIC='$(CC) $(PROG_LIBPATH) $(CFLAGS) $(LDFLAGS)'
	# $(PROG_RPATH) is here to handle things like a shared tcl library
	RUN_ENV='LIBPATH=`echo $(PROG_LIBPATH) | sed -e "s/-L//g" -e "s/ /:/g"`:$(PROG_RPATH):/usr/lib:/usr/local/lib; export LIBPATH; '
	;;

*-*-aix4.*)
	SHLIBVEXT='.a.$(LIBMAJOR).$(LIBMINOR)'
	SHLIBEXT=.a
	# AIX doesn't need separate PIC objects
	SHOBJEXT=.o
	SHLIB_EXPFLAGS='  $(SHLIB_DIRS) $(SHLIB_EXPLIBS)'
	PROFFLAGS=-pg
	# Dynamically loaded object can have whatever suffix, but don't
	# make archives like for shared libraries.
	DYNOBJEXT=.so
	#
	if test "$krb5_cv_prog_gcc" = "yes" ; then
	  wl_prefix=-Wl,
	  RPATH_FLAG='-Wl,-blibpath:'
	  LDCOMBINE='$(CC) -shared -v -o shr.o.$(LIBMAJOR).$(LIBMINOR) $$objlist -nostartfiles -Xlinker -bgcbypass:1 -Xlinker -bfilelist -Xlinker -bM:SRE -Xlinker -bE:$(SHLIB_EXPORT_FILE) -Xlinker -bernotok $(SHLIB_EXPFLAGS) -lc $$initfini'
	  LDCOMBINE_DYN='$(CC) -shared -v -o $@ $$objlist -nostartfiles -Xlinker -bgcbypass:1 -Xlinker -bfilelist -Xlinker -bM:SRE -Xlinker -bE:$(SHLIB_EXPORT_FILE) -Xlinker -bernotok $(SHLIB_EXPFLAGS) -lc $$initfini'
	else
	  wl_prefix=
	  RPATH_FLAG=-blibpath:
	  LDCOMBINE='/bin/ld -o shr.o.$(LIBMAJOR).$(LIBMINOR) $$objlist -H512 -T512 -bnoentry -bgcbypass:1 -bnodelcsect -bfilelist -bM:SRE -bE:$(SHLIB_EXPORT_FILE) -bernotok $(SHLIB_EXPFLAGS) -lc $$initfini'
	  LDCOMBINE_DYN='/bin/ld -o $@ $$objlist -H512 -T512 -bnoentry -bgcbypass:1 -bnodelcsect -bfilelist -bM:SRE -bE:$(SHLIB_EXPORT_FILE) -bernotok $(SHLIB_EXPFLAGS) -lc $$initfini'
	fi
	# Assume initialization always delayed.
	INIT_FINI_PREP="wl=${wl_prefix}; "'i=1; initfini=; for f in . $(LIBFINIFUNC); do if test $$f != .; then initfini="$$initfini $${wl}-binitfini::$$f:$$i"; else :; fi; i=`expr $$i + 1`; done'
	use_linker_fini_option=yes
	MAKE_SHLIB_COMMAND="${INIT_FINI_PREP} && ${LDCOMBINE}"' && ar cq $@ shr.o.$(LIBMAJOR).$(LIBMINOR) && chmod +x $@ && rm -f shr.o.$(LIBMAJOR).$(LIBMINOR)'
	MAKE_DYNOBJ_COMMAND="${INIT_FINI_PREP} && ${LDCOMBINE_DYN}"
	RPATH_TAIL=:/usr/lib:/lib
	CC_LINK_SHARED='$(CC) $(PROG_LIBPATH) $(RPATH_FLAG)$(PROG_RPATH):'"$RPATH_TAIL"' $(CFLAGS) $(LDFLAGS)'
	CC_LINK_STATIC='$(CC) $(PROG_LIBPATH) $(CFLAGS) $(LDFLAGS)'
	# $(PROG_RPATH) is here to handle things like a shared tcl library
	RUN_ENV='LIBPATH=`echo $(PROG_LIBPATH) | sed -e "s/-L//g" -e "s/ /:/g"`:$(PROG_RPATH):/usr/lib:/usr/local/lib; export LIBPATH; '
	;;
esac

if test "${MAKE_SHLIB_COMMAND}" = "x" ; then
  if test "${INIT_FINI_PREP}" != ":"; then
    MAKE_SHLIB_COMMAND="${INIT_FINI_PREP} && ${LDCOMBINE} -o \$@ \$\$objlist \$(SHLIB_EXPFLAGS) ${LDCOMBINE_TAIL}"
  else
    MAKE_SHLIB_COMMAND="${LDCOMBINE} -o \$@ \$\$objlist \$(SHLIB_EXPFLAGS) ${LDCOMBINE_TAIL}"
  fi
fi