@value{PRODUCT} uses a configuration system built using the Free
Software Foundation's @samp{autoconf} program.  This system makes
Kerberos V5 much simpler to build and reduces the amount of effort
required in porting Kerberos V5 to a new platform.

@menu
* Organization of the Source Directory::  Description of the source tree.
* Build Requirements::          How much disk space, etc. you need to
                                           build Kerberos.
* Unpacking the Sources::       Preparing the source tree.
* Doing the Build::             Compiling Kerberos.
* Installing the Binaries::     Installing the compiled binaries.
* Testing the Build::           Making sure Kerberos built correctly.
* Options to Configure::        Command-line options to Configure
* osconf.h::                    Header file-specific configurations
* Shared Library Support::      Building Shared Libraries for Kerberos V5
* OS Incompatibilities::        Special cases to watch for.
* Using Autoconf::              Modifying Kerberos V5's 
                                            configuration scripts.
@end menu

@node Organization of the Source Directory, Build Requirements, Building Kerberos V5, Building Kerberos V5
@section Organization of the Source Directory

Below is a brief overview of the organization of the complete source
directory.  More detailed descriptions follow.

@table @b
@itemx appl
applications with @value{PRODUCT} extensions
@itemx clients
@value{PRODUCT} user programs
@itemx gen-manpages
manpages for @value{PRODUCT} and the @value{PRODUCT} login program
@itemx include
include files
@itemx kadmin
administrative interface to the Kerberos master database
@itemx kdc
the @value{PRODUCT} Authentication Service and Key Distribution Center
@itemx krb524
utilities for converting between Kerberos 4 and Kerberos 5
@itemx lib
libraries for use with/by @value{PRODUCT}
@itemx mac
source code for building @value{PRODUCT} on MacOS
@itemx prototype
templates for source code files
@itemx slave
utilities for propagating the database to slave KDCs
@itemx tests
test suite
@itemx util
various utilities for building/configuring the code, sending bug reports, etc.
@itemx windows
source code for building @value{PRODUCT} on Windows (see windows/README)
@end table

@menu
* The appl Directory::          
* The clients Directory::       
* The gen-manpages Directory::  
* The include Directory::       
* The kadmin Directory::        
* The kdc Directory::           
* The krb524 Directory::        
* The lib Directory::           
* The prototype Directory::     
* The slave Directory::         
* The util Directory::          
@end menu

@node The appl Directory, The clients Directory, Organization of the Source Directory, Organization of the Source Directory
@subsection The appl Directory

The Kerberos release provides certain UNIX utilities, modified to use
Kerberos authentication.  In the @i{appl/bsd} directory are the
Berkeley utilities @i{login}, @i{rlogin}, @i{rsh}, and @i{rcp}, as well as
the associated daemons @i{kshd} and @i{klogind}.  The @i{login} program
obtains ticket-granting tickets for users upon login; the other utilities
provide authenticated Unix network services.

The @i{appl} directory also contains Kerberized telnet and ftp programs,
as well as sample Kerberos application client and server programs.

@node The clients Directory, The gen-manpages Directory, The appl Directory, Organization of the Source Directory
@subsection The clients Directory

This directory contains the code for several user-oriented programs.

@table @b
@itemx kdestroy
This program destroys the user's active Kerberos authorization tickets.
@value{COMPANY} recommends that users @code{kdestroy} before logging out.

@itemx kinit
This program prompts users for their Kerberos principal name and password,
and attempts to get an initial ticket-granting-ticket for that principal.

@itemx klist
This program lists the Kerberos principal and Kerberos tickets held in
a credentials cache, or the keys held in a keytab file.

@itemx kpasswd
This program changes a user's Kerberos password.

@itemx ksu
This program is a Kerberized version of the @code{su} program that is
meant to securely change the real and effective user ID to that of the
target user and to create a new security context.

@itemx kvno
This program acquires a service ticket for the specified Kerberos
principals and prints out the key version numbers of each.
@end table

@node The gen-manpages Directory, The include Directory, The clients Directory, Organization of the Source Directory
@subsection The gen-manpages Directory

There are two manual pages in this directory.  One is an introduction
to the Kerberos system.  The other describes the @code{.k5login} file
which allows users to give access with their UID to other users
authenticated by the Kerberos system.

@node The include Directory, The kadmin Directory, The gen-manpages Directory, Organization of the Source Directory
@subsection The include Directory

This directory contains the @i{include} files needed to build the
Kerberos system.

@node The kadmin Directory, The kdc Directory, The include Directory, Organization of the Source Directory
@subsection The kadmin Directory

In this directory is the code for the utilities @code{kadmin},
@code{kadmin.local}, @code{kdb5_util}, and @code{ktutil}.
@code{ktutil} is the Kerberos keytab file maintenance utility from
which a Kerberos administrator can read, write, or edit entries in a
Kerberos V5 keytab or Kerberos V4 srvtab.  @code{kadmin} and
@code{kadmin.local} are command-line interfaces to the Kerberos V5 KADM5
administration system.  @code{kadmin.local} runs on the master KDC and
does not use Kerberos to authenticate to the database, while
@code{kadmin} uses Kerberos authentication and an encrypted RPC.  The
two provide identical functionalities, which allow administrators to
modify the database of Kerberos principals.  @code{kdb5_util} allows
administrators to perform low-level maintenance procedures on Kerberos
and the KADM5 database.  With this utility, databases can be created,
destroyed, or dumped to and loaded from ASCII files.  It can also be
used to create master key stash files.

@node The kdc Directory, The krb524 Directory, The kadmin Directory, Organization of the Source Directory
@subsection The kdc Directory

This directory contains the code for the @code{krb5kdc} daemon, the
Kerberos Authentication Service and Key Distribution Center.

@node The krb524 Directory, The lib Directory, The kdc Directory, Organization of the Source Directory
@subsection The krb524 Directory

This directory contains the code for @code{krb524}, a service that
converts Kerberos V5 credentials into Kerberos V4 credentials suitable
for use with applications that for whatever reason do not use V5
directly.

@node The lib Directory, The prototype Directory, The krb524 Directory, Organization of the Source Directory
@subsection The lib Directory

The @i{lib} directory contain 10 subdirectories as well as some
definition and glue files.  The @i{crypto} subdirectory contains the
Kerberos V5 encryption library.  The @i{des425} subdirectory exports
the Kerberos V4 encryption API, and translates these functions into
calls to the Kerberos V5 encryption API.  The @i{gssapi} library
contains the Generic Security Services API, which is a library of
commands to be used in secure client-server communication.  The
@i{kadm5} directory contains the libraries for the KADM5 administration
utilities.  The Kerberos 5 database libraries are contained in
@i{kdb}.  The directories @i{krb4} and @i{krb5} contain the Kerberos 4
and Kerberos 5 APIs, respectively.  The @i{rpc} directory contains the
API for the Kerberos Remote Procedure Call protocol.

@node The prototype Directory, The slave Directory, The lib Directory, Organization of the Source Directory
@subsection The prototype Directory

This directory contains several template files.  The @code{prototype.h}
and @code{prototype.c} files contain the MIT copyright message and a
placeholder for the title and description of the file.
@code{prototype.h} also has a short template for writing @code{ifdef}
and @code{ifndef} preprocessor statements.  The @code{getopt.c} file
provides a template for writing code that will parse the options with
which a program was called.

@node The slave Directory, The util Directory, The prototype Directory, Organization of the Source Directory
@subsection The slave Directory

This directory contains code which allows for the propagation of the
Kerberos principal database from the master KDC to slave KDCs over an
encrypted, secure channel.  @code{kprop} is the program which actually
propagates the database dump file.  @code{kpropd} is the Kerberos V5
slave KDC update server which accepts connections from the @code{kprop}
program.  @code{kslave_update} is a script that takes the name of a
slave server, and propagates the database to that server if the
database has been modified since the last dump or if the database has
been dumped since the last propagation.

@node The util Directory,  , The slave Directory, Organization of the Source Directory
@subsection The util Directory

This directory contains several utility programs and libraries.  The
programs used to configure and build the code, such as @code{autoconf},
@code{lndir}, @code{kbuild}, @code{reconf},  and @code{makedepend},
are in this directory.  The @i{profile} directory contains most of the
functions which parse the Kerberos configuration files (@code{krb5.conf}
and @code{kdc.conf}).  Also in this directory are the Kerberos error table
library and utilities (@i{et}), the Sub-system library and utilities
(@i{ss}), database utilities (@i{db2}), pseudo-terminal utilities
(@i{pty}), bug-reporting program @code{send-pr}, and a generic
support library @code{support} used by several of our other libraries.

@node Build Requirements, Unpacking the Sources, Organization of the Source Directory, Building Kerberos V5
@section Build Requirements

In order to build Kerberos V5, you will need approximately 60-70
megabytes of disk space.  The exact amount will vary depending on the
platform and whether the distribution is compiled with debugging symbol
tables or not.

Your C compiler must conform to ANSI C (ISO/IEC 9899:1990, ``c89'').
Some operating systems do not have an ANSI C compiler, or their
default compiler requires extra command-line options to enable ANSI C
conformance.

If you wish to keep a separate @dfn{build tree}, which contains the compiled
@file{*.o} file and executables, separate from your source tree, you
will need a @samp{make} program which supports @samp{VPATH}, or
you will need to use a tool such as @samp{lndir} to produce a symbolic
link tree for your build tree.

@c Library support...

@node Unpacking the Sources, Doing the Build, Build Requirements, Building Kerberos V5
@section Unpacking the Sources

The first step in each of these build procedures is to unpack the
source distribution.  The Kerberos V5 distribution comes in a tar file,
generally named @file{krb5-@value{RELEASE}.tar}, which contains a
compressed tar file consisting of the sources for all of Kerberos
(generally @file{krb5-@value{RELEASE}.tar.gz}) and a PGP signature for
this source tree (generally @file{krb5-@value{RELEASE}.tar.gz.asc}).
@value{COMPANY} highly recommends that you verify the integrity of the
source code using this signature.

Unpack the compressed tar file in some directory, such as
@file{/u1/krb5-@value{RELEASE}}.  (In the rest of this document, we
will assume that you have chosen to unpack the Kerberos V5 source
distribution in this directory.  Note that the tarfiles will by default
all unpack into the @file{./krb5-@value{RELEASE}} directory, so that if
your current directory is @file{/u1} when you unpack the tarfiles, you
will get @file{/u1/krb5-@value{RELEASE}/src}, etc.)


@node Doing the Build, Installing the Binaries, Unpacking the Sources, Building Kerberos V5
@section Doing the Build

You have a number of different options in how to build Kerberos.  If you
only need to build Kerberos for one platform, using a single directory
tree which contains both the source files and the object files is the
simplest.  However, if you need to maintain Kerberos for a large number
of platforms, you will probably want to use separate build trees for
each platform. We recommend that you look at @ref{OS
Incompatibilities}, for notes that we have on particular operating
systems. 

@menu
* Building Within a Single Tree::  
* Building with Separate Build Directories::  
* Building using lndir::        
@end menu

@node Building Within a Single Tree, Building with Separate Build Directories, Doing the Build, Doing the Build
@subsection Building Within a Single Tree

If you don't want separate build trees for each architecture, then
use the following abbreviated procedure.

@enumerate
@item
 @code{cd /u1/krb5-@value{RELEASE}/src}
@item
 @code{./configure}
@item
 @code{make}
@end enumerate

That's it!

@node Building with Separate Build Directories, Building using lndir, Building Within a Single Tree, Doing the Build
@subsection Building with Separate Build Directories

If you wish to keep separate build directories for each platform, you
can do so using the following procedure.  (Note, this requires that your
@samp{make} program support @samp{VPATH}.  GNU's make will provide this
functionality, for example.)  If your @samp{make} program does not
support this, see the next section.

For example, if you wish to create a build directory for @code{pmax} binaries
you might use the following procedure:

@enumerate
@item 
@code{mkdir /u1/krb5-@value{RELEASE}/pmax}
@item
 @code{cd /u1/krb5-@value{RELEASE}/pmax}
@item
 @code{../src/configure}
@item
 @code{make}
@end enumerate

@node Building using lndir,  , Building with Separate Build Directories, Doing the Build
@subsection Building Using @samp{lndir}

If you wish to keep separate build directories for each platform, and
you do not have access to a @samp{make} program which supports @samp{VPATH},
all is not lost.  You can use the @samp{lndir} program to create
symbolic link trees in your build directory.

For example, if you wish to create a build directory for solaris binaries
you might use the following procedure:

@enumerate
@item
 @code{mkdir /u1/krb5-@value{RELEASE}/solaris}
@item
 @code{cd /u1/krb5-@value{RELEASE}/solaris}
@item
 @code{/u1/krb5-@value{RELEASE}/src/util/lndir `pwd`/../src}
@item
 @code{./configure}
@item
 @code{make}
@end enumerate

You must give an absolute pathname to @samp{lndir} because it has a bug that
makes it fail for relative pathnames. Note that this version differs
from the latest version as distributed and installed by the XConsortium
with X11R6. Either version should be acceptable.

@node Installing the Binaries, Testing the Build, Doing the Build, Building Kerberos V5
@section Installing the Binaries

Once you have built Kerberos, you should install the binaries.  You
can do this by running:

@example
% make install
@end example

If you want to install the binaries into a destination directory that
is not their final destination, which may be convenient if you want to
build a binary distribution to be deployed on multiple hosts, you may
use:

@example
% make install DESTDIR=/path/to/destdir
@end example

This will install the binaries under @code{DESTDIR/PREFIX}, e.g., the
user programs will install into @code{DESTDIR/PREFIX/bin}, the
libraries into @code{DESTDIR/PREFIX/lib}, etc.

Note that if you want to test the build (see @ref{Testing the Build}),
you usually do not need to do a @code{make install} first.

Some implementations of @samp{make} allow multiple commands to be run in
parallel, for faster builds.  We test our Makefiles in parallel builds with
GNU @samp{make} only; they may not be compatible with other parallel build
implementations.

@node Testing the Build, Options to Configure, Installing the Binaries, Building Kerberos V5
@section Testing the Build

The Kerberos V5 distribution comes with built-in regression tests.  To
run them, simply type the following command while in the top-level build
directory (i.e., the directory where you sent typed @samp{make} to start
building Kerberos; see @ref{Doing the Build}.): 

@example
% make check
@end example

@menu
* The DejaGnu Tests::           
* The KADM5 Tests::             
@end menu

@node The DejaGnu Tests, The KADM5 Tests, Testing the Build, Testing the Build
@subsection The DejaGnu Tests 

Some of the built-in regression tests are setup to use the DejaGnu
framework for running tests. These tests tend to be more comprehensive
than the normal built-in tests as they setup test servers and test
client/server activities. 

DejaGnu may be found wherever GNU software is archived.  

Most of the tests are setup to run as a non-privileged user.  For some
of the krb-root tests to work properly, either (a) the user running the
tests must not have a .k5login file in the home directory or (b) the
.k5login file must contain an entry for @code{<username>@@KRBTEST.COM}.
There are two series of tests (@samp{rlogind} and @samp{telnetd}) which
require the ability to @samp{rlogin} as root to the local
machine. Admittedly, this does require the use of a @file{.rhosts} file
or some authenticated means. @footnote{If you are fortunate enough to
have a previous version of Kerberos V5 or V4 installed, and the Kerberos
rlogin is first in your path, you can setup @file{.k5login} or
@file{.klogin} respectively to allow you access.}

If you cannot obtain root access to your machine, all the other tests
will still run. Note however, with DejaGnu 1.2, the "untested testcases"
will cause the testsuite to exit with a non-zero exit status which
@samp{make} will consider a failure of the testing process. Do not worry
about this, as these tests are the last run when @samp{make check} is
executed from the top level of the build tree.  This problem does not
exist with DejaGnu 1.3.

@node The KADM5 Tests,  , The DejaGnu Tests, Testing the Build
@subsection The KADM5 Tests

Regression tests for the KADM5 system, including the GSS-RPC, KADM5
client and server libraries, and kpasswd, are also included in this
release.  Each set of KADM5 tests is contained in a sub-directory called
@code{unit-test} directly below the system being tested.  For example,
lib/rpc/unit-test contains the tests for GSS-RPC.  The tests are all
based on DejaGnu (but they are not actually called part of "The DejaGnu
tests," whose naming predates the inclusion of the KADM5 system).  In
addition, they require the Tool Command Language (TCL) header files and
libraries to be available during compilation and some of the tests also
require Perl in order to operate.  If all of these resources are not
available during configuration, the KADM5 tests will not run.  The TCL
installation directory can be specified with the @code{--with-tcl}
configure option.  (See @xref{Options to Configure}.)  The runtest and
perl programs must be in the current execution path.

If you install DejaGnu, TCL, or Perl after configuring and building
Kerberos and then want to run the KADM5 tests, you will need to
re-configure the tree and run @code{make} at the top level again to make
sure all the proper programs are built.  To save time, you actually only
need to reconfigure and build in the directories src/kadmin/testing,
src/lib/rpc, src/lib/kadm5.

@node Options to Configure, osconf.h, Testing the Build, Building Kerberos V5
@section Options to Configure 

There are a number of options to @samp{configure} which you can use to
control how the Kerberos distribution is built.  The following table
lists the most commonly used options to Kerberos V5's @samp{configure}
program.

@table @code

@item --help

Provides help to configure. This will list the set of commonly used
options for building Kerberos.

@item --prefix=PREFIX

By default, Kerberos will install the package's files rooted at
`/usr/local' as in `/usr/local/bin', `/usr/local/sbin', etc. If you
desire a different location, use this option.

@item --exec-prefix=EXECPREFIX

This option allows one to separate the architecture independent programs
from the configuration files and manual pages. 

@item --localstatedir=LOCALSTATEDIR

This option sets the directory for locally modifiable single-machine
data.  In Kerberos, this mostly is useful for setting a location for the
KDC data files, as they will be installed in
@code{LOCALSTATEDIR/krb5kdc}, which is by default
@code{PREFIX/var/krb5kdc}.

@item CC=COMPILER

Use @code{COMPILER} as the C compiler.

@item CFLAGS=FLAGS

Use @code{FLAGS} as the default set of C compiler flags.

Note that if you use the native Ultrix compiler on a
DECstation you are likely to lose if you pass no flags to cc; md4.c
takes an estimated 3,469 billion years to compile if you provide neither
the @samp{-g} flag nor the @samp{-O} flag to @samp{cc}.

@item CPPFLAGS=CPPOPTS 

Use @code{CPPOPTS} as the default set of C preprocessor flags.  The most
common use of this option is to select certain @code{#define}'s for use
with the operating system's include files.

@item LD=LINKER

Use @code{LINKER} as the default loader if it should be different from C
compiler as specified above.

@item LDFLAGS=LDOPTS

This option allows one to specify optional arguments to be passed to the
linker. This might be used to specify optional library paths.

@item  --with-krb4

This option enables Kerberos V4 backwards compatibility using the
builtin Kerberos V4 library.

@item  --with-krb4=KRB4DIR 

This option enables Kerberos V4 backwards compatibility using a
pre-existing Kerberos V4 installation.  The directory specified by
@code{KRB4DIR} specifies where the V4 header files should be found
(@file{KRB4DIR/include}) as well as where the V4 Kerberos library should
be found (@file{KRB4DIR/lib}).

@item  --without-krb4

Disables Kerberos V4 backwards compatibility. This prevents Kerberos V4
clients from using the V5 services including the KDC. This would be
useful if you know you will never install or need to interact with V4
clients. 

@item --with-netlib[=libs]

Allows for suppression of or replacement of network libraries. By
default, Kerberos V5 configuration will look for @code{-lnsl} and
@code{-lsocket}. If your operating system has a broken resolver library
(see @ref{Solaris versions 2.0 through 2.3}) or fails to pass the tests in
@file{src/tests/resolv} you will need to use this option.

@item --with-tcl=TCLPATH

Some of the unit-tests in the build tree rely upon using a program in
Tcl. The directory specified by @code{TCLPATH} specifies where the Tcl
header file (@file{TCLPATH/include/tcl.h} as well as where the Tcl
library should be found (@file{TCLPATH/lib}).

@item --enable-shared

This option will turn on the building and use of shared library objects
in the Kerberos build. This option is only supported on certain
platforms. 

@item --enable-dns
@item --enable-dns-for-kdc
@item --enable-dns-for-realm

Enable the use of DNS to look up a host's Kerberos realm, or a realm's
KDCs, if the information is not provided in krb5.conf. See @ref{Hostnames
for the Master and Slave KDCs} for information about using DNS to
locate the KDCs, and @ref{Mapping Hostnames onto Kerberos Realms} for
information about using DNS to determine the default realm.  By default,
DNS lookups are enabled for the former but not for the latter.

@item --enable-kdc-replay-cache

Enable a cache in the KDC to detect retransmitted messages, and resend
the previous responses to them.  This protects against certain types of
attempts to extract information from the KDC through some of the
hardware preauthentication systems.

@item --with-system-et

Use an installed version of the error-table support software, the
@samp{compile_et} program, the @file{com_err.h} header file and the
@file{com_err} library.  If these are not in the default locations,
you may wish to specify @code{CPPFLAGS=-I/some/dir} and
@code{LDFLAGS=-L/some/other/dir} options at configuration time as
well.

If this option is not given, a version supplied with the Kerberos
sources will be built and installed along with the rest of the
Kerberos tree, for Kerberos applications to link against.

@item --with-system-ss

Use an installed version of the subsystem command-line interface
software, the @samp{mk_cmds} program, the @file{ss/ss.h} header file
and the @file{ss} library.  If these are not in the default locations,
you may wish to specify @code{CPPFLAGS=-I/some/dir} and
@code{LDFLAGS=-L/some/other/dir} options at configuration time as
well.  See also the @samp{SS_LIB} option.

If this option is not given, the @file{ss} library supplied with the
Kerberos sources will be compiled and linked into those programs that
need it; it will not be installed separately.

@item SS_LIB=libs...

If @samp{-lss} is not the correct way to link in your installed
@file{ss} library, for example if additional support libraries are
needed, specify the correct link options here.  Some variants of this
library are around which allow for Emacs-like line editing, but
different versions require different support libraries to be
explicitly specified.

This option is ignored if @samp{--with-system-ss} is not specified.

@item --with-system-db

Use an installed version of the Berkeley DB package, which must
provide an API compatible with version 1.85.  This option is
@emph{unsupported} and untested.  In particular, we do not know if the
database-rename code used in the dumpfile load operation will behave
properly.

If this option is not given, a version supplied with the Kerberos
sources will be built and installed.  (We are not updating this
version at this time because of licensing issues with newer versions
that we haven't investigated sufficiently yet.)

@item DB_HEADER=headername.h

If @samp{db.h} is not the correct header file to include to compile
against the Berkeley DB 1.85 API, specify the correct header file name
with this option.  For example, @samp{DB_HEADER=db3/db_185.h}.

@item DB_LIB=libs...

If @samp{-ldb} is not the correct library specification for the
Berkeley DB library version to be used, override it with this option.
For example, @samp{DB_LIB=-ldb-3.3}.

@end table

For example, in order to configure Kerberos on a Solaris machine using
the @samp{suncc} compiler with the optimizer turned on, run the configure
script with the following options:

@example
% ./configure CC=suncc CFLAGS=-O
@end example

For a slightly more complicated example, consider a system where
several packages to be used by Kerberos are installed in
@samp{/usr/foobar}, including Berkeley DB 3.3, and an @samp{ss}
library that needs to link against the @samp{curses} library.  The
configuration of Kerberos might be done thus:

@example
% ./configure CPPFLAGS=-I/usr/foobar/include LDFLAGS=-L/usr/foobar/lib \
              --with-system-et --with-system-ss --with-system-db \
              SS_LIB='-lss -lcurses' \
              DB_HEADER=db3/db_185.h DB_LIB=-ldb-3.3
@end example

In previous releases, @code{--with-} options were used to specify the
compiler and linker and their options.

@node osconf.h, Shared Library Support, Options to Configure, Building Kerberos V5
@section @file{osconf.h}

There is one configuration file which you may wish to edit to control
various compile-time parameters in the Kerberos distribution:
@file{include/stock/osconf.h}. The list that follows is by no means
complete, just some of the more interesting variables.

Please note: The former configuration file @file{config.h} no longer
exists as its functionality has been merged into the auto-configuration
process. @xref{Options to Configure}.


@table @code

@item DEFAULT_PROFILE_PATH

The pathname to the file which contains the profiles for the known realms,
their KDCs, etc.  The default value is @value{DefaultDefaultProfilePath}.

The profile file format is no longer the same format as Kerberos V4's
@file{krb.conf} file. 

@item DEFAULT_KEYTAB_NAME

The type and pathname to the default server keytab file (the
equivalent of Kerberos V4's @file{/etc/srvtab}).  The default is
@value{DefaultDefaultKeytabName}.

@item DEFAULT_KDC_ENCTYPE

The default encryption type for the KDC.  The default value is
@value{DefaultMasterKeyType}.

@item KDCRCACHE

The name of the replay cache used by the KDC.  The default value is
@value{DefaultKDCRCache}.

@item RCTMPDIR

The directory which stores replay caches.  The default is to try
@value{DefaultRCTmpDirs}.

@item DEFAULT_KDB_FILE

The location of the default database.  The default value is
@value{DefaultDatabaseName}.

@end table

@node Shared Library Support, OS Incompatibilities, osconf.h, Building Kerberos V5
@section Shared Library Support

Shared library support is provided for a few operating systems. There
are restrictions as to which compiler to use when using shared
libraries. In all cases, executables linked with the shared libraries in
this build process will have built in the location of the libraries,
therefore obliterating the need for special LD_LIBRARY_PATH, et al environment
variables when using the programs. Except where noted, multiple versions
of the libraries may be installed on the same system and continue to
work.

Currently the supported platforms are Solaris 2.6-2.9 (aka SunOS
5.6-5.9), Irix 6.5, Redhat Linux, MacOS 8-10, and Microsoft Windows
(using DLLs).

Shared library support has been tested on the following platforms but
not exhaustively (they have been built but not necessarily tested in an
installed state): Tru64 (aka Alpha OSF/1 or Digital Unix) 4.0, and
HP/UX 10.20.

Platforms for which there is shared library support but not significant
testing include FreeBSD, OpenBSD, AIX (4.3.3), Linux, NetBSD 1.4.x
(i386), and SunOS 4.x.

To enable shared libraries on the above platforms, run the configure
script with the option @samp{--enable-shared}.

@ifset notdef

XXX What does this mean?

One special note is that if the Kerberos V4 compatibility is compiled
in, you @b{must not} specify an alternate Kerberos V4 library from the
one in the tree or you will be missing references.

@end ifset

@node OS Incompatibilities, Using Autoconf, Shared Library Support, Building Kerberos V5
@section Operating System Incompatibilities

This section details operating system incompatibilities with Kerberos V5
which have been reported to the developers at MIT.  If you find
additional incompatibilities, and/or discover workarounds to such
problems, please send a report via the @code{krb5-send-pr} program.
Thanks!

@menu
* AIX::                         
* Alpha OSF/1 V1.3::            
* Alpha OSF/1 V2.0::            
* Alpha OSF/1 V4.0::            
* BSDI::                        
* HPUX::                        
* Solaris versions 2.0 through 2.3::  
* Solaris 2.X::                 
* Solaris 9::                   
* SGI Irix 5.X::                
* Ultrix 4.2/3::                
@end menu

@node AIX, Alpha OSF/1 V1.3, OS Incompatibilities, OS Incompatibilities
@subsection AIX

The AIX 3.2.5 linker dumps core trying to build a shared
@samp{libkrb5.a} produced with the GNU C compiler.  The native AIX
compiler works fine.  This problem is fixed using the AIX 4.1 linker.

@node Alpha OSF/1 V1.3, Alpha OSF/1 V2.0, AIX, OS Incompatibilities
@subsection Alpha OSF/1 V1.3

Using the native compiler, compiling with the @samp{-O} compiler flag
causes the @code{asn.1} library to be compiled incorrectly.  

Using GCC version 2.6.3 or later instead of the native compiler will also work
fine, both with or without optimization.

@node Alpha OSF/1 V2.0, Alpha OSF/1 V4.0, Alpha OSF/1 V1.3, OS Incompatibilities
@subsection Alpha OSF/1 V2.0

There used to be a bug when using the native compiler in compiling
@file{md4.c} when compiled without either the @samp{-O} or @samp{-g}
compiler options.  We have changed the code and there is no problem
under V2.1, but we do not have access to V2.0 to test and see if the
problem would exist there. (We welcome feedback on this issue). There
was never a problem in using GCC version 2.6.3.

In version 3.2 and beyond of the operating system, we have not seen
this sort of problem with the native compiler.

@node Alpha OSF/1 V4.0, BSDI, Alpha OSF/1 V2.0, OS Incompatibilities
@subsection Alpha OSF/1 (Digital UNIX) V4.0

The C compiler provided with Alpha OSF/1 V4.0 (a.k.a. Digital UNIX)
defaults to an extended K&R C mode, not ANSI C.  You need to provide
the @samp{-std} argument to the compiler (i.e., @samp{./configure
CC='cc -std'}) to enable extended ANSI C mode.  More recent versions
of the operating system, such as 5.0, seem to have C compilers which
default to @samp{-std}.

@c @node Alpha Tru64 UNIX 5.0
@c @subsection Alpha Tru64 UNIX 5.0
@c ... login.krb5 problems

@node BSDI, HPUX, Alpha OSF/1 V4.0, OS Incompatibilities
@subsection BSDI

BSDI versions 1.0 and 1.1 reportedly has a bad @samp{sed} which causes
it to go into an infinite loop during the build.  The work around is
to use a @samp{sed} from somewhere else, such as GNU.  (This may be
true for some versions of other systems derived from BSD 4.4, such as
NetBSD and FreeBSD.)

@node HPUX, Solaris versions 2.0 through 2.3, BSDI, OS Incompatibilities
@subsection HPUX

The native (bundled) compiler for HPUX currently will not work,
because it is not a full ANSI C compiler.  The optional ANSI C
compiler should work as long as you give it the @samp{-Ae} flag
(i.e. @samp{./configure CC='cc -Ae'}).  This is equivalent to
@samp{./configure CC='c89 -D_HPUX_SOURCE'}, which was the previous
recommendation.  This has only been tested recently for HPUX 10.20.

You will need to configure with @samp{--disable-shared
--enable-static}, because as of 1.4 we don't have support for HPUX
shared library finalization routines, nor the option (yet) to ignore
that lack of support (which means repeated
@code{dlopen}/@code{dlclose} cycles on the Kerberos libraries may not
be safe) and build the shared libraries anyways.

You will also need to configure the build tree with
@samp{--disable-thread-support} if you are on HPUX 10 and do not have
the DCE development package installed, because that's where the
@code{pthread.h} header file is found.  (We don't know if our code
will work with such a package installed, because according to some HP
documentation, their @code{pthread.h} has to be included before any
other header files, and our code doesn't do that.)

If you use GCC, it may work, but some versions of GCC have omitted
certain important preprocessor defines, like @code{__STDC_EXT__} and
@code{__hpux}.

@node Solaris versions 2.0 through 2.3, Solaris 2.X, HPUX, OS Incompatibilities
@subsection Solaris versions 2.0 through 2.3

The @code{gethostbyname()} routine is broken; it does not return a fully
qualified domain name, even if you are using the Domain Name Service
routines.  Since Kerberos V5 uses the fully qualified domain name as the
second component of a service principal (i.e,
@samp{host/tsx-11.mit.edu@@ATHENA.MIT.EDU}), this causes problems for servers
who try to figure out their own fully qualified domain name.  

Workarounds:  

@enumerate

@item
   Supply your own resolver library. (such as bind-4.9.3pl1 available
from ftp.vix.com)

@item
   Upgrade to Solaris 2.4

@item
   Make sure your /etc/nsswitch.conf has `files' before `dns' like:

@example
hosts:      files dns
@end example

and then in /etc/hosts, make sure there is a line with your
workstation's IP address and hostname, with the fully qualified domain
name first.  Example:

@example
18.172.1.4      dcl.mit.edu dcl
@end example

Note that making this change may cause other programs in your
environment to break or behave differently.

@end enumerate

@node Solaris 2.X, Solaris 9, Solaris versions 2.0 through 2.3, OS Incompatibilities
@subsection Solaris 2.X

You @b{must} compile Kerberos V5 without the UCB compatibility
libraries.  This means that @file{/usr/ucblib} must not be in the
LD_LIBRARY_PATH environment variable when you compile it.  Alternatively
you can use the @code{-i} option to @samp{cc}, by using the specifying
@code{CFLAGS=-i} option to @samp{configure}.

If you are compiling for a 64-bit execution environment, you may need
to configure with the option @code{CFLAGS="-D_XOPEN_SOURCE=500
-D__EXTENSIONS__"}.  This is not well tested; at MIT we work primarily
with the 32-bit execution environment.

@node Solaris 9, SGI Irix 5.X, Solaris 2.X, OS Incompatibilities
@subsection Solaris 9

Solaris 9 has a kernel race condition which causes the final output
written to the slave side of a pty to be lost upon the final close()
of the slave device.  This causes the dejagnu-based tests to fail
intermittently.  A workaround exists, but requires some help from the
scheduler, and the ``make check'' must be executed from a shell with
elevated priority limits.

Run something like

@code{priocntl -s -c FX -m 30 -p 30 -i pid nnnn}

as root, where @code{nnnn} is the pid of the shell whose priority
limit you wish to raise.

Sun has released kernel patches for this race condition.  Apply patch
117171-11 for sparc, or patch 117172-11 for x86.  Later revisions of
the patches should also work.  It is not necessary to run ``make
check'' from a shell with elevated priority limits once the patch has
been applied.

@node SGI Irix 5.X, Ultrix 4.2/3, Solaris 9, OS Incompatibilities
@subsection SGI Irix 5.X

If you are building in a tree separate from the source tree, the vendors
version of make does not work properly with regards to
@samp{VPATH}. It also has problems with standard inference rules in 5.2
(not tested yet in 5.3) so one needs to use GNU's make.

Under 5.2, there is a bug in the optional System V @code{-lsocket}
library in which the routine @code{gethostbyname()} is broken. The
system supplied version in @code{-lc} appears to work though so one may
simply specify @code{--with-netlib} option to @samp{configure}. 

In 5.3, @code{gethostbyname()} is no longer present in @code{-lsocket} and
is no longer an issue. 

@node Ultrix 4.2/3,  , SGI Irix 5.X, OS Incompatibilities
@subsection Ultrix 4.2/3

The DEC MIPS platform currently will not support the native compiler,
since the Ultrix compiler is not a full ANSI C compiler.  You should use
GCC instead.

@ifset notdef

On the DEC MIPS platform, using the native compiler, @file{md4.c} and
@file{md5.c} can not be compiled with the optimizer set at level 1.
That is, you must specify either @samp{CFLAGS=-O} and
@samp{CFLAGS=-g} to configure.  If you don't specify either, the
compile will never complete.

The optimizer isn't hung; it just takes an exponentially long time.
Compiling 6 out of the 48 algorithmic steps takes 3 seconds; compiling 7
steps takes 9 seconds; compiling 8 steps takes 27 seconds, and so on.
Calculations estimate it will finish in approximately 3,469 billion
years....

Using GCC instead of the native compiler will also work fine, both with
or without optimization.

@end ifset

@node Using Autoconf,  , OS Incompatibilities, Building Kerberos V5
@section Using @samp{Autoconf}

(If you are not a developer, you can skip this section.)

In most of the Kerberos V5 source directories, there is a
@file{configure} script which automatically determines the compilation
environment and creates the proper Makefiles for a particular
platform.  These @file{configure} files are generated using
@samp{autoconf}, which can be found in the @file{src/util/autoconf}
directory in the distribution.

Normal users will not need to worry about running @samp{autoconf}; the
distribution comes with the @file{configure} files already prebuilt.
Developers who wish to modify the @file{configure.in} files should see
@ref{Top, , Overview, autoconf, The Autoconf Manual}.  

Note that in order to run @samp{autoconf}, you must have GNU @samp{m4}
in your path.  Before you use the @samp{autoconf} in the Kerberos V5
source tree, you may also need to run @samp{configure}, and then run
@samp{make} in the @file{src/util/autoconf} directory in order to
properly set up @samp{autoconf}.

One tool which is provided for the convenience of developers can be
found in @file{src/util/reconf}.  This program should be run while the
current directory is the top source directory.  It will automatically
rebuild any @file{configure} files which need rebuilding.  If you know
that you have made a change that will require that all the
@file{configure} files need to be rebuilt from scratch, specify the
@code{--force} option:

@example
% cd /u1/krb5-@value{RELEASE}/src
% ./util/reconf --force
@end example

The developmental sources are a raw source tree (before it's been packaged
for public release), without the pre-built @file{configure} files.
In order to build from such a source tree, you must do:

@example
% cd krb5/util/autoconf
% ./configure
% make
% cd ../..
% util/reconf
@end example

Then follow the instructions for building packaged source trees (above).
To install the binaries into a binary tree, do:

@example
% cd /u1/krb5-@value{RELEASE}/src
% make all
% make install DESTDIR=somewhere-else
@end example