diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/util/db2/test/Makefile | 652 |
1 files changed, 0 insertions, 652 deletions
diff --git a/src/util/db2/test/Makefile b/src/util/db2/test/Makefile deleted file mode 100644 index 6685decb5..000000000 --- a/src/util/db2/test/Makefile +++ /dev/null @@ -1,652 +0,0 @@ -############################################################ -## config/pre.in -## common prefix for all Makefile.in in the Kerberos V5 tree. -## - -WHAT = unix -SHELL=/bin/sh - -all:: all-$(WHAT) - -clean:: clean-$(WHAT) - -distclean:: distclean-$(WHAT) - -install:: install-$(WHAT) - -check:: check-$(WHAT) - -install-headers:: install-headers-$(WHAT) - -############################## -# Recursion rule support -# - -# The commands for the recursion targets live in config/post.in. -# -# General form of recursion rules: -# -# Each recursive target foo-unix has related targets: foo-prerecurse, -# foo-recurse, and foo-postrecurse -# -# The foo-recurse rule is in post.in. It is what actually recursively -# calls make. -# -# foo-recurse depends on foo-prerecurse, so any targets that must be -# built before descending into subdirectories must be dependencies of -# foo-prerecurse. -# -# foo-postrecurse depends on foo-recurse, but targets that must be -# built after descending into subdirectories should be have -# foo-recurse as dependencies in addition to being listed under -# foo-postrecurse, to avoid ordering issues. -# -# The foo-prerecurse, foo-recurse, and foo-postrecurse rules are all -# single-colon rules, to avoid nasty ordering problems with -# double-colon rules. -# -# e.g. -# all:: includes foo -# foo: -# echo foo -# includes:: -# echo bar -# includes:: -# echo baz -# -# will result in "bar", "foo", "baz" on AIX, and possibly others. -all-unix:: all-postrecurse -all-postrecurse: all-recurse -all-recurse: all-prerecurse - -all-prerecurse: -all-postrecurse: - -clean-unix:: clean-postrecurse -clean-postrecurse: clean-recurse -clean-recurse: clean-prerecurse - -clean-prerecurse: -clean-postrecurse: - -distclean-unix: distclean-postrecurse -distclean-postrecurse: distclean-recurse -distclean-recurse: distclean-prerecurse - -distclean-prerecurse: -distclean-postrecurse: - -install-unix:: install-postrecurse -install-postrecurse: install-recurse -install-recurse: install-prerecurse - -install-prerecurse: -install-postrecurse: - -install-headers-unix:: install-headers-postrecurse -install-headers-postrecurse: install-headers-recurse -install-headers-recurse: install-headers-prerecurse - -install-headers-prerecurse: -install-headers-postrecurse: - -check-unix:: check-postrecurse -check-postrecurse: check-recurse -check-recurse: check-prerecurse - -check-prerecurse: -check-postrecurse: - -Makefiles: Makefiles-postrecurse -Makefiles-postrecurse: Makefiles-recurse -Makefiles-recurse: Makefiles-prerecurse - -Makefiles-prerecurse: -Makefiles-postrecurse: - -# -# end recursion rule support -############################## - -# Directory syntax: -# -# begin relative path -REL= -# this is magic... should only be used for preceding a program invocation -C=./ -# "/" for UNIX, "\" for Windows; *sigh* -S=/ - -SUBDIRS = $(LOCAL_SUBDIRS) -srcdir = . -SRCTOP = ./$(BUILDTOP) - -CONFIG_RELTOPDIR = ../.. - -ALL_CFLAGS = $(DEFS) $(DEFINES) $(LOCALINCLUDES) $(CPPFLAGS) $(CFLAGS) -CFLAGS = -g -CPPFLAGS = -I$(BUILDTOP)/include -I$(SRCTOP)/include -I$(BUILDTOP)/include/krb5 -I$(SRCTOP)/include/krb5 -I/usr/athena/include -DKRB5_KRB4_COMPAT -DKRB5_PRIVATE=1 -DEFS = -DHAVE_CONFIG_H -CC = /usr/gcc/bin/gcc -LD = $(PURE) /usr/gcc/bin/gcc -DEPLIBS = @DEPLIBS@ -LDFLAGS = -L/usr/athena/lib -LD_UNRESOLVED_PREFIX = @LD_UNRESOLVED_PREFIX@ -LD_SHLIBDIR_PREFIX = @LD_SHLIBDIR_PREFIX@ -LDARGS = @LDARGS@ -LIBS = -lsocket -lnsl -lresolv -SRVLIBS = @SRVLIBS@ -SRVDEPLIBS = @SRVDEPLIBS@ -CLNTLIBS = @CLNTLIBS@ -CLNTDEPLIBS = @CLNTDEPLIBS@ - -INSTALL=/usr/athena/bin/install -c -INSTALL_STRIP= -INSTALL_PROGRAM=${INSTALL} $(INSTALL_STRIP) -INSTALL_DATA=${INSTALL} -m 644 -INSTALL_SHLIB=$(INSTALL_DATA) -INSTALL_SETUID=$(INSTALL) $(INSTALL_STRIP) -m 4755 -o root -## This is needed because autoconf will sometimes define ${prefix} to be -## ${prefix}. -prefix=/usr/local -INSTALL_PREFIX=$(prefix) -INSTALL_EXEC_PREFIX=${prefix} -exec_prefix=${prefix} -SHLIB_TAIL_COMP=@SHLIB_TAIL_COMP@ - -KRB5MANROOT = ${prefix}/man -ADMIN_BINDIR = ${exec_prefix}/sbin -SERVER_BINDIR = ${exec_prefix}/sbin -CLIENT_BINDIR =${exec_prefix}/bin -ADMIN_MANDIR = $(KRB5MANROOT)/man8 -SERVER_MANDIR = $(KRB5MANROOT)/man8 -CLIENT_MANDIR = $(KRB5MANROOT)/man1 -FILE_MANDIR = $(KRB5MANROOT)/man5 -KRB5_LIBDIR = ${exec_prefix}/lib -KRB5_SHLIBDIR = ${exec_prefix}/lib$(SHLIB_TAIL_COMP) -KRB5_INCDIR = ${prefix}/include -KRB5_INCSUBDIRS = \ - $(KRB5_INCDIR)/gssapi \ - $(KRB5_INCDIR)/kerberosIV - -# -# Macros used by the KADM5 (OV-based) unit test system. -# XXX check which of these are actually used! -# -TESTDIR = $(BUILDTOP)/kadmin/testing -STESTDIR = $(SRCTOP)/kadmin/testing -COMPARE_DUMP = $(TESTDIR)/scripts/compare_dump.pl -FIX_CONF_FILES = $(TESTDIR)/scripts/fixup-conf-files.pl -INITDB = $(STESTDIR)/scripts/init_db -MAKE_KEYTAB = $(TESTDIR)/scripts/make-host-keytab.pl -LOCAL_MAKE_KEYTAB= $(TESTDIR)/scripts/make-host-keytab.pl -RESTORE_FILES = $(STESTDIR)/scripts/restore_files.sh -SAVE_FILES = $(STESTDIR)/scripts/save_files.sh -ENV_SETUP = $(TESTDIR)/scripts/env-setup.sh -CLNTTCL = $(TESTDIR)/util/ovsec_kadm_clnt_tcl -SRVTCL = $(TESTDIR)/util/ovsec_kadm_srv_tcl -# Dejagnu variables. -# We have to set the host with --host so that setup_xfail will work. -# If we don't set it, then the host type used is "native", which -# doesn't match "*-*-*". -host=sparc-sun-solaris2.8 -DEJAFLAGS = $(DEJALFLAGS) $(CLFLAGS) --debug --srcdir $(srcdir) --host \ - $(host) -RUNTEST = runtest $(DEJAFLAGS) - -START_SERVERS = $(STESTDIR)/scripts/start_servers $(TEST_SERVER) $(TEST_PATH) -START_SERVERS_LOCAL = $(STESTDIR)/scripts/start_servers_local - -STOP_SERVERS = $(STESTDIR)/scripts/stop_servers $(TEST_SERVER) $(TEST_PATH) -STOP_SERVERS_LOCAL = $(STESTDIR)/scripts/stop_servers_local -# -# End of macros for the KADM5 unit test system. -# - -transform = s,x,x, - -RM = rm -f -CP = cp -MV = mv -f -CHMOD=chmod -RANLIB = ranlib -ARCHIVE = @ARCHIVE@ -ARADD = @ARADD@ -LN = ln -s -AWK = @AWK@ -LEX = @LEX@ -LEXLIB = @LEXLIB@ -YACC = @YACC@ -AUTOCONF = autoconf -AUTOCONFFLAGS = -AUTOCONFINCFLAGS = --localdir -AUTOHEADER = autoheader -AUTOHEADERFLAGS = - -HOST_TYPE = @HOST_TYPE@ -SHEXT = @SHEXT@ -STEXT=@STEXT@ -VEXT=@VEXT@ -DO_MAKE_SHLIB = @DO_MAKE_SHLIB@ -SHLIB_STATIC_TARGET=@SHLIB_STATIC_TARGET@ - -TOPLIBD = $(BUILDTOP)/lib - -OBJEXT = o -LIBEXT = a -EXEEXT = - -# -# variables for libraries, for use in linking programs -# -- this may want to get broken out into a separate frag later -# -# -# Note: the following variables must be set in any Makefile.in that -# uses KRB5_BUILD_PROGRAM -# -# PROG_LIBPATH list of dirs, in -Ldir form, to search for libraries at link -# PROG_RPATH list of dirs, in dir1:dir2 form, for rpath purposes -# -# invocation is like: -# prog: foo.o bar.o $(KRB5_BASE_DEPLIBS) -# $(CC_LINK) -o $@ foo.o bar.o $(KRB5_BASE_LIBS) - - -CC_LINK=$(PURE) $(CC) $(PROG_LIBPATH) $(LDFLAGS) - -# prefix (with no spaces after) for rpath flag to cc -RPATH_FLAG=-R - -# this gets set by configure to either $(STLIBEXT) or $(SHLIBEXT), -# depending on whether we're building with shared libraries. -DEPLIBEXT=.a - -KADMCLNT_DEPLIB = $(TOPLIBD)/libkadm5clnt$(DEPLIBEXT) -KADMSRV_DEPLIB = $(TOPLIBD)/libkadm5srv$(DEPLIBEXT) -KDB5_DEPLIB = $(TOPLIBD)/libkdb5$(DEPLIBEXT) -DB_DEPLIB = $(DB_DEPLIB-k5) -DB_DEPLIB-k5 = $(TOPLIBD)/libdb$(DEPLIBEXT) -DB_DEPLIB-sys = -GSSRPC_DEPLIB = $(TOPLIBD)/libgssrpc$(DEPLIBEXT) -GSS_DEPLIB = $(TOPLIBD)/libgssapi_krb5$(DEPLIBEXT) -KRB4_DEPLIB = $(TOPLIBD)/libkrb4$(DEPLIBEXT) # $(TOPLIBD)/libkrb4$(DEPLIBEXT) -DES425_DEPLIB = $(TOPLIBD)/libdes425$(DEPLIBEXT) # $(TOPLIBD)/libdes425$(DEPLIBEXT) -KRB5_DEPLIB = $(TOPLIBD)/libkrb5$(DEPLIBEXT) -CRYPTO_DEPLIB = $(TOPLIBD)/libk5crypto$(DEPLIBEXT) -COM_ERR_DEPLIB = $(COM_ERR_DEPLIB-k5) -COM_ERR_DEPLIB-sys = # empty -COM_ERR_DEPLIB-k5 = $(TOPLIBD)/libcom_err$(DEPLIBEXT) - -# These are forced to use ".a" as an extension because they're never -# built shared. -SS_DEPLIB = $(SS_DEPLIB-k5) -SS_DEPLIB-k5 = $(TOPLIBD)/libss.a -SS_DEPLIB-sys = -KRB524_DEPLIB = $(BUILDTOP)/krb524/libkrb524.a -PTY_DEPLIB = $(TOPLIBD)/libpty.a - -KRB5_BASE_DEPLIBS = $(KRB5_DEPLIB) $(CRYPTO_DEPLIB) $(COM_ERR_DEPLIB) -KRB4COMPAT_DEPLIBS = $(KRB4_DEPLIB) $(DES425_DEPLIB) $(KRB5_BASE_DEPLIBS) -KDB5_DEPLIBS = $(KDB5_DEPLIB) $(DB_DEPLIB) -GSS_DEPLIBS = $(GSS_DEPLIB) -GSSRPC_DEPLIBS = $(GSSRPC_DEPLIB) $(GSS_DEPLIBS) -KADM_COMM_DEPLIBS = $(GSSRPC_DEPLIBS) $(KDB5_DEPLIBS) $(GSSRPC_DEPLIBS) -KADMSRV_DEPLIBS = $(KADMSRV_DEPLIB) $(KDB5_DEPLIBS) $(KADM_COMM_DEPLIBS) -KADMCLNT_DEPLIBS = $(KADMCLNT_DEPLIB) $(KADM_COMM_DEPLIBS) - -# Header file dependencies we might override. -# See util/depfix.sed. -# Also see depend-verify-* in post.in, which wants to confirm that we're using -# the in-tree versions. -COM_ERR_VERSION = k5 -COM_ERR_DEPS = $(COM_ERR_DEPS-k5) -COM_ERR_DEPS-sys = -COM_ERR_DEPS-k5 = $(BUILDTOP)/include/com_err.h -SS_VERSION = k5 -SS_DEPS = $(SS_DEPS-k5) -SS_DEPS-sys = -SS_DEPS-k5 = $(BUILDTOP)/include/ss/ss.h $(BUILDTOP)/include/ss/ss_err.h -DB_VERSION = k5 -DB_DEPS = $(DB_DEPS-k5) -DB_DEPS-sys = -DB_DEPS-k5 = $(BUILDTOP)/include/db.h $(BUILDTOP)/include/db-config.h -DB_DEPS-redirect = $(BUILDTOP)/include/db.h - -# Header file dependencies that might depend on whether krb4 support -# is compiled. - -KRB_ERR_H_DEP = $(BUILDTOP)/include/kerberosIV/krb_err.h -KRB524_H_DEP = $(BUILDTOP)/include/krb524.h -KRB524_ERR_H_DEP= $(BUILDTOP)/include/krb524_err.h - -# LIBS gets substituted in... e.g. -lnsl -lsocket - -# GEN_LIB is -lgen if needed for regexp -GEN_LIB = - -SS_LIB = $(SS_LIB-k5) -SS_LIB-sys = -SS_LIB-k5 = $(TOPLIBD)/libss.a -KDB5_LIB = -lkdb5 -DB_LIB = -ldb - -KRB5_LIB = -lkrb5 -K5CRYPTO_LIB = -lk5crypto -COM_ERR_LIB = -lcom_err -GSS_KRB5_LIB = -lgssapi_krb5 - -# KRB4_LIB is -lkrb4 if building --with-krb4 -# needs fixing if ever used on Mac OS X! -KRB4_LIB = -lkrb4 - -# DES425_LIB is -ldes425 if building --with-krb4 -# needs fixing if ever used on Mac OS X! -DES425_LIB = -ldes425 - -# KRB524_LIB is $(BUILDTOP)/krb524/libkrb524.a if building --with-krb4 -# needs fixing if ever used on Mac OS X! -KRB524_LIB = $(BUILDTOP)/krb524/libkrb524.a - -# HESIOD_LIBS is -lhesiod... -HESIOD_LIBS = - -KRB5_BASE_LIBS = $(KRB5_LIB) $(K5CRYPTO_LIB) $(COM_ERR_LIB) $(GEN_LIB) $(LIBS) -KRB4COMPAT_LIBS = $(KRB4_LIB) $(DES425_LIB) $(KRB5_BASE_LIBS) -KDB5_LIBS = $(KDB5_LIB) $(DB_LIB) -GSS_LIBS = $(GSS_KRB5_LIB) -# needs fixing if ever used on Mac OS X! -GSSRPC_LIBS = -lgssrpc $(GSS_LIBS) -KADM_COMM_LIBS = $(GSSRPC_LIBS) -# need fixing if ever used on Mac OS X! -KADMSRV_LIBS = -lkadm5srv $(HESIOD_LIBS) $(KDB5_LIBS) $(KADM_COMM_LIBS) -KADMCLNT_LIBS = -lkadm5clnt $(KADM_COMM_LIBS) - -# need fixing if ever used on Mac OS X! -PTY_LIB = -lpty - -# -# some more stuff for --with-krb4 -KRB4_LIBPATH = -KRB4_INCLUDES = -I$(SRCTOP)/include/kerberosIV -I$(BUILDTOP)/include/kerberosIV - -# -# variables for --with-tcl= -TCL_LIBS = @TCL_LIBS@ -TCL_LIBPATH = @TCL_LIBPATH@ -TCL_RPATH = @TCL_RPATH@ -TCL_MAYBE_RPATH = @TCL_MAYBE_RPATH@ -TCL_INCLUDES = @TCL_INCLUDES@ - -# error table rules -# -### /* these are invoked as $(...) foo.et, which works, but could be better */ -COMPILE_ET= $(COMPILE_ET-k5) -COMPILE_ET-sys= compile_et -COMPILE_ET-k5= $(BUILDTOP)/util/et/compile_et -d $(SRCTOP)/util/et - -.SUFFIXES: .h .c .et .ct - -# These versions cause both .c and .h files to be generated at once. -# But GNU make doesn't understand this, and parallel builds can trigger -# both of them at once, causing them to stomp on each other. The versions -# below only update one of the files, so compile_et has to get run twice, -# but it won't break parallel builds. -#.et.h: ; $(COMPILE_ET) $< -#.et.c: ; $(COMPILE_ET) $< - -.et.h: - d=ettmp$$$$ ; (cp $< $$d.et && $(COMPILE_ET) $$d.et && mv $$d.h $*.h) ; \ - e=$$? ; rm -f $$d.* ; exit $$e - -.et.c: - d=ettmp$$$$ ; (cp $< $$d.et && $(COMPILE_ET) $$d.et && mv $$d.c $*.c) ; \ - e=$$? ; rm -f $$d.* ; exit $$e - -# rule to make object files -# -.SUFFIXES: .c .o -.c.o: - $(CC) $(ALL_CFLAGS) -c $< - -# ss command table rules -# -MAKE_COMMANDS= $(MAKE_COMMANDS-k5) -MAKE_COMMANDS-sys= mk_cmds -MAKE_COMMANDS-k5= $(BUILDTOP)/util/ss/mk_cmds - -.ct.c: - $(MAKE_COMMANDS) $< - -## -## end of pre.in -############################################################ -thisconfigdir=./.. -myfulldir=util/db2/test -mydir=test -BUILDTOP=$(REL)..$(S)..$(S).. - -FCTSH = /usr/bin/sh -TMPDIR=. - -LOCALINCLUDES= -I. -I$(srcdir)/../include -I../include -I$(srcdir)/../mpool \ - -I$(srcdir)/../btree -I$(srcdir)/../hash -I$(srcdir)/../db - -PROG_LIBPATH=-L$(TOPLIBD) -PROG_RPATH=$(KRB5_LIBDIR) - -KRB5_RUN_ENV= - -all:: - -dbtest: dbtest.o $(DB_DEPLIB) - $(CC_LINK) -o $@ dbtest.o $(STRERROR_OBJ) $(DB_LIB) - -check:: dbtest - $(KRB5_RUN_ENV) srcdir=$(srcdir) TMPDIR=$(TMPDIR) $(FCTSH) $(srcdir)/run.test - -bttest.o: $(srcdir)/btree.tests/main.c - $(CC) $(ALL_CFLAGS) -c $(srcdir)/btree.tests/main.c -o $@ - -bttest: bttest.o $(DB_DEPLIB) - $(CC_LINK) -o $@ bttest.o $(STRERROR_OBJ) $(DB_LIB) - -clean-unix:: - $(RM) dbtest.o dbtest __dbtest - $(RM) bttest.o bttest -############################################################ -## config/post.in -## - -# in case there is no default target (very unlikely) -all:: - -check-windows:: - -############################## -# dependency generation -# - -depend:: depend-postrecurse -depend-postrecurse: depend-recurse -depend-recurse: depend-prerecurse - -depend-prerecurse: -depend-postrecurse: - -depend-postrecurse: depend-update-makefile - -ALL_DEP_SRCS= $(SRCS) $(EXTRADEPSRCS) - -# be sure to check ALL_DEP_SRCS against *what it would be if SRCS and -# EXTRADEPSRCS are both empty* -.depend-verify-srcdir: - @if test "$(srcdir)" = "." ; then \ - echo 1>&2 error: cannot build dependencies with srcdir=. ; \ - echo 1>&2 "(can't distinguish generated files from source files)" ; \ - exit 1 ; \ - else \ - if test -r .depend-verify-srcdir; then :; \ - else (set -x; touch .depend-verify-srcdir); fi \ - fi -.depend-verify-et: depend-verify-et-$(COM_ERR_VERSION) -depend-verify-et-k5: - @if test -r .depend-verify-et; then :; \ - else (set -x; touch .depend-verify-et); fi -depend-verify-et-sys: - @echo 1>&2 error: cannot build dependencies using system et package - @exit 1 -.depend-verify-ss: depend-verify-ss-$(SS_VERSION) -depend-verify-ss-k5: - @if test -r .depend-verify-ss; then :; \ - else (set -x; touch .depend-verify-ss); fi -depend-verify-ss-sys: - @echo 1>&2 error: cannot build dependencies using system ss package - @exit 1 -.depend-verify-db: depend-verify-db-$(DB_VERSION) -depend-verify-db-k5: - @if test -r .depend-verify-db; then :; \ - else (set -x; touch .depend-verify-db); fi -depend-verify-db-sys: - @echo 1>&2 error: cannot build dependencies using system db package - @exit 1 -.depend-verify-gcc: depend-verify-gcc-yes -depend-verify-gcc-yes: - @if test -r .depend-verify-gcc; then :; \ - else (set -x; touch .depend-verify-gcc); fi -depend-verify-gcc-no: - @echo 1>&2 error: The '"depend"' rules are written for gcc. - @echo 1>&2 Please use gcc, or update the rules to handle your compiler. - @exit 1 - -DEP_CFG_VERIFY = .depend-verify-srcdir \ - .depend-verify-et .depend-verify-ss .depend-verify-db -DEP_VERIFY = $(DEP_CFG_VERIFY) .depend-verify-gcc - -.d: $(ALL_DEP_SRCS) $(DEP_CFG_VERIFY) depend-dependencies - if test "$(ALL_DEP_SRCS)" != " " ; then \ - $(RM) .dtmp && $(MAKE) .dtmp && mv -f .dtmp .d ; \ - else \ - touch .d ; \ - fi - -# These are dependencies of the depend target that do not get fed to -# the compiler. Examples include generated header files. -depend-dependencies: - -# .dtmp must *always* be out of date so that $? can be used to perform -# VPATH searches on the sources. -# -# NOTE: This will fail when using Make programs whose VPATH support is -# broken. -.dtmp: $(ALL_DEP_SRCS) - $(CC) -M $(ALL_CFLAGS) $? > .dtmp - -# Generate a script for dropping in the appropriate make variables, using -# directory-specific parameters. General substitutions independent of local -# make variables happen in depfix.sed. -.depfix2.sed: .depend-verify-gcc Makefile $(SRCTOP)/util/depgen.sed - x=`$(CC) -print-libgcc-file-name` ; \ - echo '$(SRCTOP)' '$(myfulldir)' '$(srcdir)' '$(BUILDTOP)' "$$x" | sed -f $(SRCTOP)/util/depgen.sed > .depfix2.tmp - mv -f .depfix2.tmp .depfix2.sed - -DEPLIBOBJNAMEFIX = sed -e 's;^\$$(OUTPRE)\([a-zA-Z0-9_\-]*\)\.\$$(OBJEXT):;\1.so \1.po &;' - -# NOTE: This will also generate spurious $(OUTPRE) and $(OBJEXT) -# references in rules for non-library objects in a directory where -# library objects happen to be built. It's mostly harmless. -.depend: .d .depfix2.sed $(SRCTOP)/util/depfix.sed - sed -f .depfix2.sed < .d | sed -f $(SRCTOP)/util/depfix.sed | \ - (if test "x$(STLIBOBJS)" != "x"; then $(DEPLIBOBJNAMEFIX) ; else cat; fi ) \ - > .depend - -depend-update-makefile: .depend depend-recurse - if test -n "$(SRCS)" ; then \ - sed -e '/^# +++ Dependency line eater +++/,$$d' \ - < $(srcdir)/Makefile.in | cat - .depend \ - > $(srcdir)/Makefile.in.new; \ - $(SRCTOP)/config/move-if-changed $(srcdir)/Makefile.in.new $(srcdir)/Makefile.in ; \ - else :; fi - -DEPTARGETS = .depend .d .dtmp .depfix2.sed .depfix2.tmp $(DEP_VERIFY) - -# -# end dependency generation -############################## - -clean:: clean-$(WHAT) - -clean-unix:: - $(RM) $(OBJS) $(DEPTARGETS) - -clean-windows:: - $(RM) *.$(OBJEXT) - $(RM) msvc.pdb *.err - -distclean:: distclean-$(WHAT) - -distclean-normal-clean: - $(MAKE) NORECURSE=true clean -distclean-prerecurse: distclean-normal-clean -distclean-nuke-configure-state: - $(RM) config.log config.cache config.status Makefile -distclean-postrecurse: distclean-nuke-configure-state - -Makefiles-prerecurse: Makefile - -# thisconfigdir = relative path from this Makefile to config.status -# mydir = relative path from config.status to this Makefile -Makefile: $(srcdir)/Makefile.in $(thisconfigdir)/config.status \ - $(SRCTOP)/config/pre.in $(SRCTOP)/config/post.in - cd $(thisconfigdir) && $(SHELL) config.status $(mydir)/Makefile -$(thisconfigdir)/config.status: $(srcdir)/$(thisconfigdir)/configure - cd $(thisconfigdir) && $(SHELL) config.status --recheck -$(srcdir)/$(thisconfigdir)/configure: $(srcdir)/$(thisconfigdir)/configure.in \ - $(SRCTOP)/aclocal.m4 - -$(RM) -r $(srcdir)/$(thisconfigdir)/autom4te.cache - cd $(srcdir)/$(thisconfigdir) && \ - $(AUTOCONF) ${AUTOCONFINCFLAGS}=$(CONFIG_RELTOPDIR) $(AUTOCONFFLAGS) - -$(RM) -r $(srcdir)/$(thisconfigdir)/autom4te.cache - -RECURSE_TARGETS=all-recurse clean-recurse distclean-recurse install-recurse \ - check-recurse depend-recurse Makefiles-recurse install-headers-recurse - -# MY_SUBDIRS overrides any setting of SUBDIRS generated by the -# configure script that generated this Makefile. This is needed when -# the configure script that produced this Makefile creates multiple -# Makefiles in different directories; the setting of SUBDIRS will be -# the same in each. -# -# LOCAL_SUBDIRS seems to account for the case where the configure -# script doesn't call any other subsidiary configure scripts, but -# generates multiple Makefiles. -$(RECURSE_TARGETS): - @case "`echo 'x$(MFLAGS)'|sed -e 's/^x//' -e 's/ --.*$$//'`" \ - in *[ik]*) e="status=1" ;; *) e="exit 1";; esac; \ - if test -z "$(MY_SUBDIRS)" ; then \ - do_subdirs="$(SUBDIRS)" ; \ - else \ - do_subdirs="$(MY_SUBDIRS)" ; \ - fi; \ - status=0; \ - if test -n "$$do_subdirs" && test -z "$(NORECURSE)"; then \ - for i in $$do_subdirs ; do \ - if test -d $$i && test -r $$i/Makefile ; then \ - case $$i in .);; *) \ - target=`echo $@|sed s/-recurse//`; \ - echo "making $$target in $(CURRENT_DIR)$$i..."; \ - if (cd $$i ; $(MAKE) \ - CURRENT_DIR=$(CURRENT_DIR)$$i/ $$target) then :; \ - else eval $$e; fi; \ - ;; \ - esac; \ - else \ - echo "Skipping missing directory $(CURRENT_DIR)$$i" ; \ - fi; \ - done; \ - else :; \ - fi;\ - exit $$status - -## -## end of post.in -############################################################ |