Remove nroff man pages

We generate man pages from RST sources now; they are checked into
the tree in src/man/.

The gen-manpages directory is no longer needed.

1 files changed, 0 insertions, 276 deletions

diff --git a/src/kadmin/dbutil/kdb5_util.M b/src/kadmin/dbutil/kdb5_util.M
deleted file mode 100644
index b834a225a..000000000
--- a/src/kadmin/dbutil/kdb5_util.M
+++ /dev/null
@@ -1,276 +0,0 @@
-.TH KDB5_UTIL 8
-.SH NAME
-kdb5_util \- Kerberos database maintenance utility
-.SH SYNOPSIS
-.B kdb5_util
-[\fB\-r\fP\ \fIrealm\fP] [\fB\-d\fP\ \fIdbname\fP]
-[\fB\-k\fP\ \fImkeytype\fP] [\fB\-M\fP\ \fImkeyname\fP]
-[\fB\-kv\fP\ \fImkeyVNO\fP] 
-[\fB\-sf\fP\ \fIstashfilename\fP]
-[\fB\-m\fP]
-.I command
-.I [command_options]
-.SH DESCRIPTION
-.B kdb5_util
-allows an administrator to perform low-level maintenance procedures on
-the Kerberos and KADM5 database.  Databases can be created, destroyed,
-and dumped to and loaded from
-.SM ASCII
-files.  Additionally,
-.B kdb5_util
-can create a Kerberos master key stash file.
-.B kdb5_util
-subsumes the functionality of and makes obsolete the previous database
-maintenance programs
-.BR kdb5_create ,
-.BR kdb5_edit ,
-.BR kdb5_destroy ,
-and
-.BR kdb5_stash .
-.PP
-When
-.B kdb5_util
-is run, it attempts to acquire the master key and open the database.
-However, execution continues regardless of whether or not
-.B kdb5_util
-successfully opens the database, because the database may not exist yet
-or the stash file may be corrupt.
-.PP
-Note that some KDB plugins may not support all
-.B kdb5_util
-commands.
-.SH COMMAND-LINE OPTIONS
-.TP
-\fB\-r\fP\ \fIrealm\fP
-specifies the Kerberos realm of the database; by default the realm
-returned by
-.IR krb5_default_local_realm (3)
-is used.
-.TP
-\fB\-d\fP\ \fIdbname\fP
-specifies the name under which the principal database is stored; by
-default the database is that listed in
-.IR kdc.conf (5).
-The KADM5 policy database and lock file are also derived from this
-value.
-.TP
-\fB\-k\fP\ \fImkeytype\fP
-specifies the key type of the master key in the database; the default is
-that given in
-.IR kdc.conf .
-.TP
-\fB\-kv\fP\ \fImkeyVNO\fP
-Specifies the version number of the master key in the database; the default is
-1.  Note that 0 is not allowed.
-.TP
-\fB\-M\fP\ \fImkeyname\fP
-principal name for the master key in the database; the default is
-that given in
-.IR kdc.conf .
-.TP
-.B \-m
-specifies that the master database password should be read from the TTY
-rather than fetched from a file on disk.
-.TP
-\fB\-sf\fP \fIstash_file\fP
-specifies the stash file of the master database password.
-.TP
-\fB\-P\fP \fIpassword\fP
-specifies the master database password.  This option is not recommended.
-.SH COMMANDS
-.TP
-\fBcreate\fP [\fB\-s\fP]
-Creates a new database.  If the
-.B \-s
-option is specified, the stash file is also created.  This command fails
-if the database already exists.  If the command is successful, the
-database is opened just as if it had already existed when the program
-was first run.
-.TP
-\fBdestroy\fP [\fB\-f\fP]
-Destroys the database, first overwriting the disk sectors and then
-unlinking the files, after prompting the user for confirmation.  With
-the
-.B \-f
-argument, does not prompt the user.
-.TP
-\fBstash\fP [\fB\-f\fP\ \fIkeyfile\fP]
-Stores the master principal's keys in a stash file.  The
-.B \-f
-argument can be used to override the keyfile specified at startup.
-.TP
-\fBdump\fP [\fB\-old\fP|\fB-b6\fP|\fB-b7\fP|\fB-ov\fP|\fB-r13\fP]
-[\fB\-verbose\fP] [\fB\-mkey_convert\fP]
-[\fB\-new_mkey_file\fP \fImkey_file\fP] [\fB\-rev\fP] [\fB\-recurse\fP]
-[\fIfilename\fP [\fIprincipals...\fP]]
-.br
-Dumps the current Kerberos and KADM5 database into an ASCII file.  By
-default, the database is dumped in current format, "kdb5_util
-load_dump version 6".  If
-.I filename
-is not specified, or is the string "\-", the dump is sent to standard
-output.  Options:
-.RS
-.TP
-.B \-old
-causes the dump to be in the Kerberos 5 Beta 5 and earlier dump format
-("kdb5_edit load_dump version 2.0").
-.TP
-.B \-b6
-causes the dump to be in the Kerberos 5 Beta 6 format ("kdb5_edit
-load_dump version 3.0").
-.TP
-.B \-b7
-causes the dump to be in the Kerberos 5 Beta 7 format ("kdb5_util load_dump version 4").  This was the dump format produced on releases prior to 1.2.2.
-.TP
-.B \-ov
-causes the dump to be in
-.I ovsec_adm_export
-format.
-.TP
-.B \-r13
-causes the dump to be in the Kerberos 5 1.3 format ("kdb5_util load_dump version 5").  This was the dump format produced on releases prior to 1.8.
-.TP
-.B \-verbose
-causes the name of each principal and policy to be printed as it is
-dumped.
-.TP
-.B \-mkey_convert
-prompts for a new master key.  This new master key will be used to
-re-encrypt the key data in the dumpfile.  The key data in the database
-will not be changed.
-.TP
-.B \-new_mkey_file \fImkey_file\fP
-the filename of a stash file.  The master key in this stash file will
-be used to re-encrypt the key data in the dumpfile.  The key data in
-the database will not be changed.
-.TP
-.B \-rev
-dumps in reverse order.  This may recover principals that do not dump
-normally, in cases where database corruption has occurred.
-.TP
-.B \-recurse
-causes the dump to walk the database recursively (btree only).  This
-may recover principals that do not dump normally, in cases where
-database corruption has occurred.  In cases of such corruption, this
-option will probably retrieve more principals than the \fB\-rev\fP
-option will.
-.RE
-.TP
-\fBload\fP \fB\-old\fP|\fB-b6\fP|\fB-b7\fP|\fB-ov\fP|\fB-r13\fP] [\fB\-hash\fP]
-[\fB\-verbose\fP] [\fB\-update\fP] \fIfilename dbname\fP
-.br
-Loads a database dump from the named file into the named database.
-Unless the 
-.B \-old
-or 
-.B \-b6
-option is given, the format of the dump file is detected
-automatically and handled as appropriate.  Unless the
-.B \-update
-option is given, 
-.B load
-creates a new database containing only the principals in the dump file,
-overwriting the contents of any previously existing database.  Note that
-when using the LDAP KDB plugin the
-.B \-update
-must be given.  Options:
-.RS
-.TP
-.B \-old
-requires the database to be in the Kerberos 5 Beta 5 and earlier format
-("kdb5_edit load_dump version 2.0").
-.TP
-.B \-b6
-requires the database to be in the Kerberos 5 Beta 6 format ("kdb5_edit
-load_dump version 3.0").
-.TP
-.B \-b7
-requires the database to be in the Kerberos 5 Beta 7 format ("kdb5_util
-load_dump version 4").
-.TP
-.B \-ov
-requires the database to be in
-.I ovsec_adm_import
-format.  Must be used with the
-.B \-update
-option.
-.TP
-.B \-hash
-requires the database to be stored as a hash.  If this option is not
-specified, the database will be stored as a btree.  This option
-is not recommended, as databases stored in hash format are known to
-corrupt data and lose principals.
-.TP
-.B \-verbose
-causes the name of each principal and policy to be printed as it is
-dumped.
-.TP
-.B \-update
-records from the dump file are added to or updated in the existing
-database; otherwise, a new database is created containing only what is
-in the dump file and the old one destroyed upon successful completion.
-.TP
-.B dbname
-is required and overrides the value specified on the command line or the
-default.
-.RE
-.TP
-\fBark\fP
-Adds a random key.
-.TP
-\fBadd_mkey\fP [\fB\-e etype\fP] [\fB\-s\fP] 
-Adds a new master key to the K/M (master key) principal.  Existing master keys will remain.
-The
-.B \-e etype
-option allows specification of the enctype of the new master key.  The
-.B \-s
-option stashes the new master key in a local stash file which will be created if it doesn't already exist.
-.TP
-\fBuse_mkey\fP \fImkeyVNO [\fBtime\fP]
-Sets the activation time of the master key specified by 
-.B mkeyVNO.
-Once a master key is active (i.e. its activation time has been reached) it will then be used to encrypt principal keys either when the principal keys change, are newly created or when the update_princ_encryption command is run.  If the
-.B time 
-argument is provided then that will be the activation time otherwise the current time is used by default.  The format of the optional
-.B time 
-argument is that specified in the Time Formats section of the kadmin man page.
-.TP
-\fBlist_mkeys\fP
-List all master keys from most recent to earliest in K/M principal. The output will show the KVNO, enctype and salt for each mkey similar to kadmin getprinc output.  A * following an mkey denotes the currently active master key. 
-.TP
-\fBpurge_mkeys\fP [\fB-f\fP] [\fB-n\fP] [\fB-v\fP]
-Delete master keys from the K/M principal that are not used to protect any principals.  This command can be used to remove old master keys from a K/M principal once all principal keys are protected by a newer master key.
-.TP
-.B \-f
-does not prompt user.
-.TP
-.B \-n
-do a dry run, shows master keys that would be purged, does not actually purge any keys.
-.TP
-.B \-v
-verbose output.
-.TP
-\fBupdate_princ_encryption\fP [\fB\-f\fP] [\fB\-n\fP] [\fB\-v\fP] [\fBprinc\-pattern\fP]
-Update all principal records (or only those matching the
-.B princ\-pattern
-glob pattern) to re-encrypt the key data using the active
-database master key, if they are encrypted using older versions,
-and give a count at the end of the number of principals updated.
-If the
-.B \-f
-option is not given, ask for confirmation before starting to make
-changes.  The
-.B \-v
-option causes each principal processed (each one matching the pattern)
-to be listed, and an indication given as to whether it needed updating
-or not.
-The
-.B \-n
-option causes the actions not to be taken, only the normal or verbose
-status messages displayed; this implies
-.B \-f
-since no database changes will be performed and thus there's little
-reason to seek confirmation.
-.SH SEE ALSO
-kadmin(8)