summaryrefslogtreecommitdiffstats
path: root/Schemas/CIM228/DMTF/Network/CIM_iSCSISessionSettings.mof
diff options
context:
space:
mode:
Diffstat (limited to 'Schemas/CIM228/DMTF/Network/CIM_iSCSISessionSettings.mof')
-rw-r--r--Schemas/CIM228/DMTF/Network/CIM_iSCSISessionSettings.mof139
1 files changed, 139 insertions, 0 deletions
diff --git a/Schemas/CIM228/DMTF/Network/CIM_iSCSISessionSettings.mof b/Schemas/CIM228/DMTF/Network/CIM_iSCSISessionSettings.mof
new file mode 100644
index 0000000..a637e5a
--- /dev/null
+++ b/Schemas/CIM228/DMTF/Network/CIM_iSCSISessionSettings.mof
@@ -0,0 +1,139 @@
+// Copyright (c) 2005 DMTF. All rights reserved.
+ [Version ( "2.11.0" ),
+ UMLPackagePath ( "CIM::Network::iSCSI" ),
+ Description (
+ "The default negotiation settings for an iSCSI Session. These "
+ "properties are used as the starting position for login "
+ "negotiations between initiator and target nodes. The "
+ "properties describing the resulting outcome of the login "
+ "negotiation are in the iSCSISession class. Depending on a "
+ "given implementation an instance of iSCSISessionSettings will "
+ "be associated by ElementSettingData to one or more instances "
+ "of iSCSIProtocolEndpoint, SCSIProtocolController, or "
+ "ComputerSystem." )]
+class CIM_iSCSISessionSettings : CIM_SettingData {
+
+ [Write, Description (
+ "The maximum number of connections allowed in each "
+ "session to and/or from this node." ),
+ MinValue ( 1 ),
+ MaxValue ( 65535 ),
+ MappingStrings { "MIB.IETF|iSCSI-MIB.iscsiNodeMaxConnections" },
+ ModelCorrespondence {
+ "CIM_iSCSISession.MaxConnectionsPerSession" }]
+ uint32 MaxConnectionsPerSession = 1;
+
+ [Write, Description (
+ "This property indicates the InitialR2T preference for "
+ "this node: true = YES, false = will try to negotiate NO, "
+ "will accept YES." ),
+ MappingStrings { "MIB.IETF|iSCSI-MIB.iscsiNodeInitialR2T" },
+ ModelCorrespondence { "CIM_iSCSISession.InitialR2T" }]
+ boolean InitialR2TPreference = true;
+
+ [Write, Description (
+ "This property indicates ImmediateData preference for "
+ "this node True = YES (but will accept NO), False = NO." ),
+ MappingStrings { "MIB.IETF|iSCSI-MIB.iscsiNodeImmediateData" },
+ ModelCorrespondence { "CIM_iSCSISession.ImmediateData" }]
+ boolean ImmediateDataPreference = true;
+
+ [Write, Description (
+ "Maximum number of outstanding R2Ts allowed per ISCSI task."
+ ),
+ MinValue ( 1 ),
+ MaxValue ( 65535 ),
+ MappingStrings {
+ "MIB.IETF|iSCSI-MIB.iscsiNodeMaxOutstandingR2T" },
+ ModelCorrespondence { "CIM_iSCSISession.MaxOutstandingR2T" }]
+ uint32 MaxOutstandingR2T = 1;
+
+ [Write, Description (
+ "The maximum length (bytes) supported for unsolicited "
+ "data to/from this node." ),
+ Units ( "Bytes" ),
+ MinValue ( 512 ),
+ MaxValue ( 16777215 ),
+ MappingStrings {
+ "MIB.IETF|iSCSI-MIB.iscsiNodeFirstBurstLength" },
+ ModelCorrespondence {
+ "CIM_iSCSISession.MaxUnsolicitedFirstDataBurstLength" }]
+ uint32 MaxUnsolicitedFirstDataBurstLength = 65536;
+
+ [Write, Description (
+ "The maximum number of bytes which can be sent within a "
+ "single sequence of Data-In or Data-Out PDUs." ),
+ Units ( "Bytes" ),
+ MinValue ( 512 ),
+ MaxValue ( 16777215 ),
+ MappingStrings { "MIB.IETF|iSCSI-MIB.iscsiNodeMaxBurstLength" },
+ ModelCorrespondence { "CIM_iSCSISession.MaxDataBurstLength" }]
+ uint32 MaxDataBurstLength = 262144;
+
+ [Write, Description (
+ "The DataSequenceInOrder preference of this node. False "
+ "(=No) indicates that iSCSI data PDU sequences MAY be "
+ "transferred in any order. True (=Yes) indicates that "
+ "data PDU sequences MUST be transferred using "
+ "continuously increasing offsets, except during error "
+ "recovery." ),
+ MappingStrings {
+ "MIB.IETF|iSCSI-MIB.iscsiNodeDataSequenceInOrder" },
+ ModelCorrespondence { "CIM_iSCSISession.DataSequenceInOrder" }]
+ boolean DataSequenceInOrderPreference = true;
+
+ [Write, Description (
+ "The DataPDUInOrder preference of this node. False (=No) "
+ "indicates that iSCSI data PDUs within sequences MAY be "
+ "in any order. True (=Yes) indicates that data PDUs "
+ "within sequences MUST be at continuously increasing "
+ "addresses, with no gaps or overlay between PDUs." ),
+ MappingStrings { "MIB.IETF|iSCSI-MIB.iscsiNodeDataPDUInOrder" },
+ ModelCorrespondence { "CIM_iSCSISession.DataPDUInOrder" }]
+ boolean DataPDUInOrderPreference = true;
+
+ [Write, Description (
+ "The DefaultTime2Wait preference of this node. This is "
+ "the minimum time, in seconds, to wait before attempting "
+ "an explicit/implicit logout or active iSCSI task "
+ "reassignment after an unexpected connection termination "
+ "or a connection reset." ),
+ Units ( "Seconds" ),
+ MinValue ( 0 ),
+ MaxValue ( 3600 ),
+ MappingStrings {
+ "MIB.IETF|iSCSI-MIB.iscsiNodeDefaultTime2Wait" },
+ ModelCorrespondence { "CIM_iSCSISession.DefaultTimeToWait" }]
+ uint32 DefaultTimeToWaitPreference = 2;
+
+ [Write, Description (
+ "The DefaultTime2Retain preference of this node. This is "
+ "the maximum time, in seconds after an initial wait "
+ "(Time2Wait), before which an active iSCSI task "
+ "reassignment is still possible after an unexpected "
+ "connection termination or a connection reset." ),
+ Units ( "Seconds" ),
+ MinValue ( 0 ),
+ MaxValue ( 3600 ),
+ MappingStrings {
+ "MIB.IETF|iSCSI-MIB.iscsiNodeDefaultTime2Retain" },
+ ModelCorrespondence { "CIM_iSCSISession.DefaultTimeToRetain" }]
+ uint32 DefaultTimeToRetainPreference = 20;
+
+ [Write, Description (
+ "The ErrorRecoveryLevel preference of this node. "
+ "Currently, only 0-2 are valid. This is designed to "
+ "accommodate future error recover levels. \n"
+ "Higher error recovery levels imply support in addition "
+ "to support for the lower error level functions. In other "
+ "words, error level 2 implies support for levels 0-1, "
+ "since those functions are subsets of error level 2." ),
+ MinValue ( 0 ),
+ MaxValue ( 255 ),
+ MappingStrings {
+ "MIB.IETF|iSCSI-MIB.iscsiNodeErrorRecoveryLevel" },
+ ModelCorrespondence { "CIM_iSCSISession.ErrorRecoveryLevel" }]
+ uint32 ErrorRecoveryLevelPreference = 0;
+
+
+};