summaryrefslogtreecommitdiffstats
path: root/Schemas/CIM228/DMTF/Network/CIM_SCSIProtocolEndpoint.mof
diff options
context:
space:
mode:
Diffstat (limited to 'Schemas/CIM228/DMTF/Network/CIM_SCSIProtocolEndpoint.mof')
-rw-r--r--Schemas/CIM228/DMTF/Network/CIM_SCSIProtocolEndpoint.mof74
1 files changed, 74 insertions, 0 deletions
diff --git a/Schemas/CIM228/DMTF/Network/CIM_SCSIProtocolEndpoint.mof b/Schemas/CIM228/DMTF/Network/CIM_SCSIProtocolEndpoint.mof
new file mode 100644
index 0000000..c56de0b
--- /dev/null
+++ b/Schemas/CIM228/DMTF/Network/CIM_SCSIProtocolEndpoint.mof
@@ -0,0 +1,74 @@
+// Copyright (c) 2005 DMTF. All rights reserved.
+ [Version ( "2.11.0" ),
+ UMLPackagePath ( "CIM::Network::ProtocolEndpoints" ),
+ Description (
+ "A SCSIProtocolEndpoint represents the protocol (command) "
+ "aspects of a logical SCSI port, independent of the "
+ "connection/transport. SCSIProtocolEndpoint is either directly "
+ "or indirectly associated to one or more instances of "
+ "LogicalPort (via PortImplementsEndpoint) depending on the "
+ "underlying transport. Indirect associations aggregate one or "
+ "more LogicalPorts using intermediate ProtocolEndpoints (iSCSI, "
+ "etc). SCSIProtocolEndpoint is also associated to a "
+ "SCSIProtocolController, representing the SCSI device." )]
+class CIM_SCSIProtocolEndpoint : CIM_ProtocolEndpoint {
+
+ [Override ( "Name" ),
+ Description (
+ "The SCSI identifier for the target or initiator device, "
+ "in the format appropriate for the ConnectionType. If a "
+ "ConnectionType specific subclass is defined, the "
+ "subclass may override Name to define the format. For "
+ "other ConnectionTypes, the format (and content) should "
+ "match that of PermamnentAddress of the corresponding "
+ "LogicalPort." ),
+ MaxLen ( 256 ),
+ MappingStrings {
+ "SPC.INCITS-T10 |Protocol Specific Parameters | Name" },
+ ModelCorrespondence {
+ "CIM_SCSIProtocolEndpoint.ConnectionType",
+ "CIM_SCSIProtocolEndpoint.OtherConnectionType" }]
+ string Name;
+
+ [Description (
+ "The supported connection type for this endpoint. The "
+ "connection type may be needed before the port(s) are "
+ "associated and also is used in some SCSI commands." ),
+ ValueMap { "1", "2", "3", "4", "5", "6", "7", "8", "9" },
+ Values { "Other", "Fibre Channel", "Parallel SCSI", "SSA",
+ "IEEE 1394", "RDMA", "iSCSI", "SAS", "ADT" },
+ MappingStrings {
+ "SPC.INCITS-T10 | Protocol Identifier | Values" },
+ ModelCorrespondence { "CIM_SCSIProtocolEndpoint.Name",
+ "CIM_SCSIProtocolEndpoint.OtherConnectionType" }]
+ uint16 ConnectionType;
+
+ [Description (
+ "For iSCSI, each SCSIProtocolEndpoint MUST act as either "
+ "a target or an initiator endpoint. Other transports "
+ "allow a SCSI PE to act as both an initiator and target "
+ "endpoint. This property indicates which role this "
+ "ProtocolEndpoint implements." ),
+ ValueMap { "0", "2", "3", "4" },
+ Values { "Unknown", "Initiator", "Target",
+ "Both Initiator and Target" }]
+ uint16 Role;
+
+ [Description (
+ "For ports on a target device, the port number, relative "
+ "to the storage system. 0 is reserved by T10, 1 is port "
+ "A, 2 is port B, etc. These numbers are used in SCSI "
+ "commands that operate on target port groups." ),
+ MinValue ( 1 ),
+ MappingStrings {
+ "SPC.INCITS-T10 | RelativeTargetPort | IdentifierFormat" }]
+ uint32 TargetRelativePortNumber;
+
+ [Description (
+ "The connection type, if ConnectionType is \"Other\"." ),
+ ModelCorrespondence { "CIM_SCSIProtocolEndpoint.Name",
+ "CIM_SCSIProtocolEndpoint.ConnectionType" }]
+ string OtherConnectionType;
+
+
+};