diff options
Diffstat (limited to 'docs/textdocs/OS2-Client-HOWTO.txt')
| -rw-r--r-- | docs/textdocs/OS2-Client-HOWTO.txt | 61 |
1 files changed, 0 insertions, 61 deletions
diff --git a/docs/textdocs/OS2-Client-HOWTO.txt b/docs/textdocs/OS2-Client-HOWTO.txt deleted file mode 100644 index cf3033956ea..00000000000 --- a/docs/textdocs/OS2-Client-HOWTO.txt +++ /dev/null @@ -1,61 +0,0 @@ - - -Q. How can I configure OS/2 Warp Connect or OS/2 Warp 4 as a client for Samba? - -A. A more complete answer to this question can be found on: - http://carol.wins.uva.nl/~leeuw/samba/warp.html - - Basically, you need three components: - - * The File and Print Client ('IBM Peer') - * TCP/IP ('Internet support') - * The "NetBIOS over TCP/IP" driver ('TCPBEUI') - - Installing the first two together with the base operating system on a blank - system is explained in the Warp manual. If Warp has already been installed, - but you now want to install the networking support, use the "Selective - Install for Networking" object in the "System Setup" folder. - - Adding the "NetBIOS over TCP/IP" driver is not described in the manual and - just barely in the online documentation. Start MPTS.EXE, click on OK, click - on "Configure LAPS" and click on "IBM OS/2 NETBIOS OVER TCP/IP" in - 'Protocols'. This line is then moved to 'Current Configuration'. Select - that line, click on "Change number" and increase it from 0 to 1. Save this - configuration. - - If the Samba server(s) is not on your local subnet, you can optionally add - IP names and addresses of these servers to the "Names List", or specify a - WINS server ('NetBIOS Nameserver' in IBM and RFC terminology). For Warp - Connect you may need to download an update for 'IBM Peer' to bring it on - the same level as Warp 4. See the webpage mentioned above. - - -Q. How can I configure OS/2 Warp 3 (not Connect), OS/2 1.2, 1.3 or 2.x for - Samba? - -A. You can use the free Microsoft LAN Manager 2.2c Client for OS/2 from - ftp://ftp.microsoft.com/BusSys/Clients/LANMAN.OS2/ - See http://carol.wins.uva.nl/~leeuw/lanman.html for more information on - how to install and use this client. In a nutshell, edit the file \OS2VER - in the root directory of the OS/2 boot partition and add the lines - - 20=setup.exe - 20=netwksta.sys - 20=netvdd.sys - - before you install the client. Also, don't use the included NE2000 driver - because it is buggy. Try the NE2000 or NS2000 driver from - <a href="ftp://ftp.cdrom.com/pub/os2/network/ndis/"> - ftp://ftp.cdrom.com/pub/os2/network/ndis/</a> instead. - - -Q. Are there any other issues when OS/2 (any version) is used as a client? - -A. When you do a NET VIEW or use the "File and Print Client Resource Browser", - no Samba servers show up. This can be fixed by a patch from - http://carol.wins.uva.nl/~leeuw/samba/fix.html - The patch will be included in a later version of Samba. It also fixes a - couple of other problems, such as preserving long filenames when objects - are dragged from the Workplace Shell to the Samba server. - - |