JHT ==> Just tidying up for Release.

1 files changed, 0 insertions, 663 deletions

diff --git a/source/Makefile.RPM b/source/Makefile.RPM
deleted file mode 100644
index ca17cce64ef..00000000000
--- a/source/Makefile.RPM
+++ /dev/null
@@ -1,663 +0,0 @@
-###########################################################################
-# Makefile for Samba SMB client/server for unix
-# Copyright Andrew Tridgell 1992-1996
-###########################################################################
-
-# The base manpages directory to put the man pages in
-# Note: $(MANDIR)/man1, $(MANDIR)/man5 and $(MANDIR)/man8 must exist.
-MANDIR = /usr/man
-
-# The directories to put things in. If you use multiple
-# architectures or share the samba binaries across NFS then
-# you will probably want to change this layout.
-BASEDIR = /usr
-BINDIR = $(BASEDIR)/bin
-SBINDIR = $(BASEDIR)/sbin
-LIBDIR = /etc
-VARDIR = /var
-
-# The permissions to give the executables
-INSTALLPERMS = 0755
-
-# Add any optimisation or debugging flags here
-# add -DSYSLOG for syslog support
-# RPM_OPT_FLAGS is needed when building an RPM distribution package
-# for RedHat Linux.
-FLAGS1 = $(RPM_OPT_FLAGS)
-#FLAGS1 = -O
-LIBS1 = 
-
-# You will need to use a ANSI C compiler. This means under SunOS 4 you can't 
-# use cc, instead you will have to use gcc. 
-CC = gcc
-
-# This may help with some versions of make
-SHELL = /bin/sh
-
-# The following can be useful for compiling on multiple architectures
-# just uncommment them putting the right directory in.
-# srcdir=./
-# VPATH=$(srcdir)
-
-# set these to where to find various files
-# These can be overridden by command line switches (see smbd(8))
-# or in smb.conf (see smb.conf(5))
-SMBLOGFILE = $(VARDIR)/log/log.smb
-NMBLOGFILE = $(VARDIR)/log/log.nmb
-CONFIGFILE = $(LIBDIR)/smb.conf
-LMHOSTSFILE = $(LIBDIR)/lmhosts
-
-# the directory where lock files go
-LOCKDIR = $(VARDIR)/lock/samba
-
-# set this to the default group you want your machine to appear in
-# for browsing. This can also be set in nmbd (see nmbd(8))
-WORKGROUP = WORKGROUP
-
-# set this to the name of the default account, which is the one
-# to use when no username or password is specified.  This can be overridden
-# in the runtime configuration file (see smb.conf(5))
-# NOTE: The account "nobody" may not be a good one as
-# on many unixes it may not be able to print. Thus you
-# might have to create a separate guest account that can print.
-GUESTACCOUNT = nobody
-
-# where you are going to have the smbrun binary. This defaults to the 
-# install directory. This binary is needed for correct printing
-# and magic script execution. This should be an absolute path!
-# Also not that this should include the name "smbrun" on the end (the
-# name of the executable)
-SMBRUN = $(BINDIR)/smbrun
-
-# This is for PAM authentication. RedHat Linux uses PAM.
-# If you use PAM, then uncomment the following lines:
-PAM_FLAGS = -DUSE_PAM
-PAM_LIBS = -ldl -lpam
-
-# This is for AFS authentication.  If you use AFS then set AFS_BASE 
-# according to your system layout, and uncomment the other lines as well.
-# AFS_BASE = /usr/afsws
-# AFS_FLAGS = -DAFS_AUTH -I$(AFS_BASE)/include
-# AFS_LIBDIR = $(AFS_BASE)/lib
-# NOTE: You may need to add -laudit in the line below
-# AFS_LIBS = -L$(AFS_LIBDIR) -L$(AFS_LIBDIR)/afs -lkauth -lprot -lubik \
-#                -lauth -lrxkad -lsys -ldes -lrx -llwp -lcom_err \
-#                $(AFS_LIBDIR)/afs/util.a
-
-# This is for DCE/DFS enablement. Uncomment this so that smbd can
-# operate as an authenticated user identity to operate on files that
-# live in the DCE Distributed Filesystem.
-# DCE_BASE = /opt/dcelocal
-# DCE_FLAGS = -I$(DCE_BASE)/include
-# DCE_LIBDIR = -L$(DCE_BASE)/lib
-# DCE_LIBS =
-
-# This is for SMB encrypted (lanman) passwords.
-# you may wish to add -DREPLACE_GETPASS if your getpass() is limited
-# to 8 chars
-# DES_BASE=/usr/local/libdes
-# DES_FLAGS= -I$(DES_BASE)
-# DES_LIB= -L$(DES_BASE) -ldes
-# PASSWD_FLAGS=-DUSE_LIBDES -DSMB_PASSWD=\"$(BINDIR)/smbpasswd\" -DSMB_PASSWD_FILE=\"$(BASEDIR)/private/smbpasswd\"
-
-######################################
-# VTP-Support
-#
-# uncomment the following two lines to enable VTP-Support
-#VTP_FLAGS = -DWITH_VTP
-#VTP_OBJ = vt_mode.o
-######################################
-
-######################################
-# WHICH AWK? awk is used for automatic prototype generation. GNU awk works
-# where inferior awks don't. Sun is one manufacturer who supplies both
-# a broken awk called 'awk' and a fixed one called 'nawk'. mkproto.awk will
-# only work with the latter, and even that isn't as good as free GNU awk.
-#
-# Leave this uncommented; the OS-specific stuff will override it if required
-AWK = awk
-######################################
-
-#####################################
-# WHICH OPERATING SYSTEM?
-# UNCOMMENT ONE OF THE SECTIONS BELOW
-# MAKE SURE ONLY *ONE* IS UNCOMMENTED
-#
-# The following are additional flags that may apply
-#   -DNETGROUP if your machine supports yp netgroups
-#   -DSHADOW_PWD if you are using shadow passwords
-#   -DGETPWANAM if you wish to use getpwanam() call
-#   -DPWDAUTH if you have and want to use the pwdauth() call
-#   -DUFC_CRYPT if you want the fast crypt routine
-#   -DALLOW_CHANGE_PASSWORD if you want users to be able to set their password
-#                           remotely (only works on some systems)
-#   -DQUOTAS for quota support in disk_free(). This probably only works 
-#            on some systems.
-#   -DFAST_SHARE_MODES=1 if you want the fast shared memory instead of the
-#                      slow description files for share mode locking. This
-#                      requires the mmap() and lockf() system calls.
-#
-#    NOTE: GETPWANAM & PWDAUTH are mutually exclusive, if you
-#          Define one, you should NOT define the other.
-#####################################
-
-#####################################
-# for the JAPANESE EXTENSION
-# select filename's code set for KANJI/KANA in UNIX,
-# apply the following flag
-#   -DKANJI=\"<code>\"
-#        <code> is select character code set for JAPAN.
-#             sjis:   if your machine support SJIS
-#             euc:      if your machine support EUC
-#             jis7:     if your machine support JIS7
-#             jis8:     if your machine support JIS8
-#             junet:    if your machine support jis7 + junet rule
-#             hex:      if your machine only support 7 bits ascii filename only
-#                       convert to hexdecimal code preseeding ':'.
-# see also README.jis
-######################################
-
-
-# This is for SUNOS 4. Use the SUNOS5 entry for Solaris 2.
-# Note that you cannot use Suns "cc" compiler
-# as it's not an Ansi-C compiler. Get gcc or acc. 
-# Note that if you have adjunct passwords you may need the GETPWANAM 
-# or PWDAUTH option. There have been reports that using PWDAUTH may crash
-# your pwdauthd server so GETPWANAM is preferable (and probably faster)
-# contributed by Andrew.Tridgell@anu.edu.au
-# FLAGSM = -DSUNOS4
-# LIBSM =   
-# AWK = nawk 
-
-# Use this for Linux with shadow passwords
-# contributed by Andrew.Tridgell@anu.edu.au
-# add -DLINUX_BIGCRYPT is you have shadow passwords but don't have the
-# right libraries and includes
-# FLAGSM = -DLINUX -DSHADOW_PWD
-# LIBSM = -lshadow
-
-# Use this for Linux without shadow passwords
-# contributed by Andrew.Tridgell@anu.edu.au
-# AXPROC defines DEC Alpha Processor
-# FLAGSM = -DLINUX -DAXPROC
-FLAGSM = -DLINUX
-LIBSM = 
-
-# Use this for Linux with quotas and without shadow passwords
-# contributed by Andrew.Tridgell@anu.edu.au
-# AXPROC defines DEC Alpha Processor
-# FLAGSM = -DLINUX -DAXPROC -DQUOTAS
-# FLAGSM = -DLINUX -DQUOTAS
-# LIBSM = 
-
-# Use this for Linux with quota and glibc2
-# contributed by xeno@mix.hive.no
-# Tested on the 2.0.30 kernel and ext2fs filesystem.
-# FLAGSM = -DLINUX -DQUOTAS -DNO_ASMSIGNALH -DGLIBC2
-# LIBSM = -L/lib/libc5-compat -lcrypt
-
-# This is for SUNOS5.4 and later (also known as Solaris 2.4 and later)
-# contributed by Andrew.Tridgell@anu.edu.au
-# FLAGSM = -DSUNOS5 -DSHADOW_PWD -DNETGROUP 
-# LIBSM = -lsocket -lnsl
-# AWK = nawk 
-
-# This is for SUNOS 5.2 and 5.3 (also known as Solaris 2.2 and 2.3)
-# contributed by hdsi@newtech.net
-# FLAGSM = -DSUNOS5 -DSHADOW_PWD -DNETGROUP -DNO_STRFTIME
-# LIBSM = -lsocket -lnsl
-# AWK = nawk 
-
-# This is for UXP/DS
-# contributed by dsfrost@oai6.yk.fujitsu.co.jp
-# FLAGSM = -DSVR4 -DSHADOW_PWD
-# LIBSM = -lsocket -lnsl
-
-# This is for SVR4
-# Contributed by mark@scot1.ucsalf.ac.uk
-# FLAGSM = -DSVR4 -DSHADOW_PWD -DALLOW_CHANGE_PASSWORD
-# LIBSM = -lsocket -lnsl -lc -L/usr/ucblib -lucb
-
-
-# This is for the Motorola 88xxx/9xx range of machines
-# Contributed by RPE@monnet.com
-# FLAGSM = -DSVR4 -DSHADOW_PWD -DGETTIMEOFDAY1
-# LIBSM = -lsocket -lnsl -lc -L/usr/ucblib -lucb
-
-
-# This is for UNIXWARE
-# FLAGSM = -Xa -DSVR4 -DSHADOW_PWD
-# LIBSM = -lsocket -lnsl -lc -L/usr/ucblib -lucb
-
-
-# This is for ULTRIX. Add -DULTRIX_AUTH for Ultrix enhanced security.
-# contributed by iversen@dsfys1.fi.uib.no
-# FLAGSM = -DULTRIX
-# LIBSM =   
-
-
-# This is for OSF1 (Alpha)
-# contributed by errath@balu.kfunigraz.ac.at
-# NOTE: You may need -warning_unresolved if you get unresolved symbols
-# FLAGSM = -DOSF1
-# LIBSM =
-
-# This is for OSF1 with DCE/DFS
-# contributed by Jim Doyle <doyle@oec.com>
-# FLAGSM = -DOSF1 -DDFS_AUTH -DSIGCLD_IGNORE -DNO_SIGNAL_TEST
-# LIBSM = -ldce -lpthreads -lmach -lc_r
-
-# This is for OSF1 (Alpha) with NIS and Fast Crypt
-# contributed by David Gardiner <dgardine@cssip.edu.au>
-# FLAGSM = -DOSF1 -DNETGROUP -DUFC_CRYPT
-# LIBSM =
-
-
-# This is for OSF1 (Alpha) V2.0 Enhanced Security 
-# contributed by Udo Linauer <ul@eacpc4.tuwien.ac.at>
-# FLAGSM = -DOSF1 -DOSF1_ENH_SEC
-# LIBSM = -lsecurity
-
-
-# This is for AIX
-# contributed by tomc@osi.curtin.edu.au
-# FLAGSM = -DAIX
-# LIBSM =   
-
-# This is for AIX 3.2.5 with DCE/DFS
-# contributed by Jim Doyle <doyle@oec.com>
-# FLAGSM = -DAIX -DDFS_AUTH -DSIGCLD_IGNORE -DNO_SIGNAL_TEST
-# LIBSM = -lc_r -ldce -lpthreads
-# CC = cc_r
-
-# This is for BSDI 
-# contributed by tomh@metrics.com
-# versions of BSDI prior to 2.0 may need to add -DUSE_F_FSIZE for 
-# disk usage stats to be correct
-# FLAGSM = -DBSDI
-# LIBSM =   
-
-
-# This is for NetBSD. Add -DNETBSD_1_0 if you are using 1.0
-# contributed by noses@oink.rhein.de
-# FLAGSM = -DNETBSD -DSHADOW_PWD
-# LIBSM = -lcrypt 
-
-
-# This is for SEQUENT. 
-# Contributed by fwk@ix.netcom.com (Frank Keeney) and 
-# rpwillia@Pentagon-EMH6.army.mil (Ray Williams)
-# tested on DYNIX/ptx(R) V2.1.0
-# FLAGSM = -DSEQUENT -DSHADOW_PWD -DHAVE_TIMEZONE
-# LIBSM = -lrpc -lsocket -lPW -linet -lnsl -lseq -lsec
-
-
-# This is for SEQUENT PTX 4.1.x
-# Contributed by bressler@iftccu.ca.boeing.com (Rick Bressler)
-# based on Keeny and Williams contribution.
-# tested on DYNIX/ptx(R) V4.1.3
-# FLAGSM = -DSEQUENT -DSHADOW_PWD -DHAVE_TIMEZONE -DPTX4
-# LIBSM = -lrpc -lsocket -lPW -lnsl -lseq -lsec
-
-
-# This is for HP-UX. Note that some systems don't like the -Aa switch.
-# contributed by Pasi.Kaara@atk.tpo.fi
-# You will need -DREPLACE_GETPASS if you use smb encryption
-# FLAGSM = -DHPUX -Aa -D_HPUX_SOURCE -D_POSIX_SOURCE
-# LIBSM = 
-
-# This is for HP-UX with DCE/DFS
-# contributed by Jim Doyle <doyle@oec.com>
-# FLAGSM = -DHPUX -Aa -D_HPUX_SOURCE -D_POSIX_SOURCE -DDFS_AUTH -D_REENTRANT -I/usr/include/reentrant
-# LIBSM = -ldce -lM -lc_r
-
-# HP-UX 10.x Trusted System
-# Contributed by David-Michael Lincke (dlincke@sgcl1.unisg.ch)
-# FLAGSM = +O3 -Ae -DHPUX -DHPUX_10_TRUSTED
-# LIBSM = -lsec
-
-
-# This is for SGI.
-# contributed by lpc@solomon.technet.sg (Michael Chua)
-# FOR SGI IRIX 4.x.x, use the following line
-# FLAGSM = -DSGI -DHAVE_TIMEZONE
-# LIBSM = -lsun
-
-# FOR SGI IRIX 5.x.x, use this line instead
-# FLAGSM = -DSGI5 -DSHADOW_PWD -DHAVE_TIMEZONE
-# LIBSM =
-
-
-# This is for FreeBSD
-# contributed by kuku@acds.physik.rwth-aachen.de
-# NOTE: You may need to add -DBSD44 if you have password problems
-# FLAGSM = -DFreeBSD
-# LIBSM = -lcrypt 
-
-
-# This is for NEXTSTEP Release 2.X
-# No Posix.
-# contributed by brad@cac.washington.edu (Brad Greer)
-# FLAGSM = -DNEXT2 
-# LIBSM = 
-
-# This is for NEXTSTEP Release 3.0 and greater (including OPENSTEP for Mach).
-# contributed by brad@cac.washington.edu (Brad Greer)
-# additional configuration by pmarcos@next.com (Paul Marcos)
-# For compiling n-way fat executables, you should append the appropriat -arch 
-# flags to the FLAGSM variable.  Valid flags are:
-#    -arch m68k
-#    -arch i386
-#    -arch hppa
-#    -arch sparc
-# To compile 4-way fat, you would append
-#    -arch m68k -arch i386 -arch hppa -arch sparc
-# FLAGSM = -DNEXT3_0
-# LIBSM = 
-
-
-# NOTE: ISC is also known as "INTERACTIVE"
-# This is for Sunsoft ISC SVR3V4 running in POSIX mode
-# contributed by pim@cti-software.nl (Pim Zandbergen)
-# FLAGSM = -posix -D_SYSV3 -DISC -DSHADOW_PWD
-# LIBSM = -lsec -lcrypt -linet
-
-# This is for Sunsoft ISC SVR3V4 running in iBCS2 mode
-# contributed by pim@cti-software.nl (Pim Zandbergen)
-# FLAGSM = -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_SYSV3\
-#          -DISC -DSHADOW_PWD -DREPLACE_GETWD -DREPLACE_RENAME
-# LIBSM = -lsec -lcrypt -linet -lcposix
-
-
-# This is for A/UX 3.0
-# Contributed by root@dolphin.csudh.edu (Jon S. Stevens)
-# FLAGSM = -DAUX
-# LIBSM =
-
-# This is for Altos Series 386/1000
-# Contributed by cal@zls.com
-# FLAGSM = -DALTOS -DHAS_RDCHK
-# LIBSM = -lsocket -lxenix
-
-
-#Note: The SCO entries require the libcrypt library. You can get it via
-#anonymous ftp from ftp.sco.com:/SLS/lng225b.* or ftp.uu.net:/vendors/sco
-#
-# Use this for SCO with shadow passwords. Tested on "Open enterprise 3.0"
-# SCO changes from Heinz Mauelshagen (mauelsha@ez.da.telekom.de)
-# FLAGSM = -DSCO -DSHADOW_PWD -DNETGROUP
-# LIBSM = -lyp -lrpc -lyp -lsec -lsocket -lcrypt_i -lintl
-
-# Use this for SCO with shadow passwords, without YP.
-# Tested on "Open Enterprise Server 3.0" (John Owens john@micros.com)
-# Also, use "CC = cc" above.
-# FLAGSM = -DSCO -DSHADOW_PWD
-# LIBSM = -lsec -lsocket -lcrypt_i
-
-# Use this for SCO with TCB passwords (default).
-# Tested on "Open enterprise 3.0". Contributed by lance@fox.com.
-# CC     = cc
-# FLAGSM = -DSCO -DSecureWare
-# LIBSM  = -lprot_s -lcrypt -lsocket -lm -lc_s
-
-# Use this for SCO Unix 3.2v2 (ODT 1.1) with TCB passwords (default).
-# Contributed by Stephen.Rothwell@pd.necisa.oz.au
-# N.B. this needs gcc
-# FLAGSM = -DSCO -DSecureWare -DSCO3_2_2
-# LIBSM  = -lprot -lcrypt_i -lsocket -lm -lintl
-
-# This is for the european distribution of SCO. 
-# Contributed by Urmet.Janes@gwhite.goodwin.ee
-# FLAGSM = -DSCO -DSHADOW_PWD 
-# LIBSM = -lsec -lsocket /usr/lib/libcrypt_i.a -lintl
-
-# Use this for SCO OpenServer 5 with TCB passwords (default).
-# contributed by Scott Michel <scottm@intime.intime.com>
-# you may also like to add the -dy switch (recommended by Marnus van 
-# Niekerk, mvn@pixie.co.za)
-# CC     = cc -Xc
-# FLAGSM = -DSCO -DSecureWare -DEVEREST -DUSE_MMAP
-# LIBSM  = -lprot -lcurses -lcrypt -lsocket -lPW -lm -lx -lc_s -lc
-
-
-# This is for intergraph. 
-# contributed by cjkiick@flinx.b11.ingr.com
-# modified by ttj@sknsws61.sjo.statkart.no
-# FLAGSM = -DCLIX -D_INGR_EXTENSIONS=1
-# LIBSM = -lbsd -lc_s
-
-# This is for DGUX. 
-# Contributed by ross@augie.insci.com (Ross Andrus)
-# FLAGSM = -DDGUX 
-# LIBSM  = 
-
-# This is for Apollo Domain/OS sr10.3 (systype = BSD4.3)
-# Added 1994-07-08 Stephen C. Steel <steve@qv3donald.LeidenUniv.nl>
-# additional patches by jmi@csd.cri.dk (John Mills)
-# you may need the "-A ansi" switch to cc
-# FLAGSM = -DAPOLLO -D_INCLUDE_BSD_SOURCE -D_INCLUDE_XOPEN_SOURCE
-# LIBSM =
-
-
-# RiscIX. 
-# contributed by Jim Barry <jim@ilp.com> and 
-# Charles Gay-Jones <charlie@ilp.com>
-# FLAGSM = -DRiscIX -DNOSTRDUP
-# LIBSM =
-
-
-# This is for System V with some berkely extensions (Motorola 88k R32V3.2).
-# contributed by tonyb@plaza.ds.adp.com (Tony D. Birnseth)
-# FLAGSM = -DM88K_R3
-# LIBSM = -lgen -lbsd -lnsl
-
-
-# This is for DNIX.
-# contributed by Peter Olsson <pol@leissner.se>
-# NOTE: You may need an updated libc.a from your vendor as older
-# versions have broken mktime calls and no initgroups() call
-# NOTE2: You may need -lpasswd if you use shadow passwords
-# NOTE3: Please read the file DNIX.txt in the docs directory. It
-# contains important information about uid handling under DNIX, you may
-# need to patch your C library.
-# FLAGSM = -DDNIX -I/usr/include/bsd
-# LIBSM = -ln
-
-
-# This is for Cray, Unicos 8.0
-# contributed by velo@sesun3.epfl.ch (Martin Ouwehand)
-# FLAGSM = -DCRAY -U__STDC__ -DQUOTAS
-# LIBSM =
-
-# This is for Convex
-# contributed by Victor Balashov <balashov@cv.jinr.dubna.su>
-# and Ulrich Hahn <ulrich.hahn@zdv.uni-tuebingen.de>
-# FLAGSM= -DCONVEX -DSHADOW_PWD
-# LIBSM= 
-
-# This is for SMP_DC.OSx v1.1-94c079 on Pyramid S series
-# contributed by jeffrey@itm.org
-# FLAGSM = -DSOLARIS -DSHADOW_PWD -DBSD_COMP
-# LIBSM = -lsocket -lnsl
-
-# This is for QNX 4.22
-# Contributed by eldo@invisa.satlink.net (Eldo Loguzzo)
-# FLAGSM = -DQNX -DGUEST_SESSSETUP=1
-# LIBSM =
-
-
-# This is for SONY NEWS, NEWS-OS 4.2.x
-# contributed by sky@sm.sony.co.jp (Katushi Sato)
-# FLAGSM = -DNEWS42 -DKANJI=\"sjis\"
-# LIBSM =
-
-
-# This is for SONY NEWS, NEWS-OS 6.1.x
-# contributed by kobo@sm.sony.co.jp (Yoichi Kobori)
-# FLAGSM = -Xa -DSVR4 -DNEWS61 -DSHADOW_PWD -DNETGROUP -DGETTIMEOFDAY1 -DKANJI=\"euc\"\ -D_SONYILS_H
-# LIBSM = -lsocket -lnsl
-
-
-# This is for OS/2 using EMX 0.9b
-# Contributed by jasonr@pec.co.nz (Jason Rumney)
-# FLAGSM = -DOS2
-# LIBSM = -Zexe -lsocket
-
-
-# This is for LYNX 2.3.0 (gcc v2.6)
-# Contributed by woelfel@hpe.fzk.de (Manfred Woelfel)
-# FLAGSM = -DLYNX -DUFC_CRYPT -mposix
-# LIBSM = -lbsd
-
-
-# This is for MachTen (a unix like system for Macintoshes)
-# contributed by Trevor Strohman (trev@figment.tenon.com)
-# FLAGSM = -DMACHTEN
-# LIBSM =
-
-
-# RISCOs 5.0B
-# contributed by John Agnew <johna@bfs.Unibol.COM>
-# FLAGSM = -systype svr4 -std -DSVR4
-# LIBSM = -lsocket -lnsl -lc -L/usr/ucblib -lucb
-
-
-# This is for B.O.S. (Bull Operating System)
-# Contributed by koine@fileita.it
-# FLAGSM = -DBOS -DNO_RESOURCEH -DUSE_WAITPID
-# LIBSM = -linet
-
-
-# This for Amiga using GCC and ixemul.library 43.0 or later.
-# contributed by Rask Ingemann Lambertsen <rask@k4315.kampsax.dtu.dk>
-# The binaries will support both AmiTCP and AS225R2 compatible
-# protocol stacks because of the use of ixnet.library.
-# Other protocol stacks will be supported automatically if
-# support for them is added to ixnet.library.
-# The binaries will have automatic stack extension :-)
-# smbd must be run from inetd :-(
-# FLAGSM = -DAMIGA -Dfork=vfork -mstackextend
-# LIBSM =
-
-
-
-######################################################################
-# DON'T EDIT BELOW THIS LINE
-######################################################################
-
-CFLAGS1 = $(FLAGS1) -DSMBLOGFILE=\"$(SMBLOGFILE)\" -DNMBLOGFILE=\"$(NMBLOGFILE)\"
-CFLAGS2 = -DCONFIGFILE=\"$(CONFIGFILE)\" -DLMHOSTSFILE=\"$(LMHOSTSFILE)\" 
-CFLAGS3 = -DLOCKDIR=\"$(LOCKDIR)\" -DSMBRUN=\"$(SMBRUN)\"
-CFLAGS4 = -DWORKGROUP=\"$(WORKGROUP)\" -DGUEST_ACCOUNT=\"$(GUESTACCOUNT)\" 
-CFLAGS5 = $(CFLAGS1) $(CFLAGS2) $(CFLAGS3) $(CFLAGS4) $(FLAGSM) $(AFS_FLAGS) 
-CFLAGS  = $(CFLAGS5) $(PAM_FLAGS) $(DCE_FLAGS) $(DES_FLAGS) $(PASSWD_FLAGS) $(VTP_FLAGS)
-LIBS = $(LIBS1) $(LIBSM) $(PAM_LIBS) $(DCE_LIBS) $(DES_LIB)
-
-SPROGS = smbd nmbd
-PROGS1 = smbclient testparm testprns smbrun smbstatus smbpasswd 
-PROGS = $(PROGS1) nmblookup
-SCRIPTS = smbtar addtosmbpass
-
-all : CHECK $(SPROGS) $(PROGS) 
-
-CHECK :
-	@$(SHELL) $(srcdir)checkos.sh $(FLAGSM)
-	@echo "Using CFLAGS = $(CFLAGS)"
-	@echo "Using LIBS = $(LIBS)"
-
-INCLUDES1 = version.h local.h includes.h smb.h 
-INCLUDES2 = trans2.h 
-INCLUDES = $(INCLUDES1) $(INCLUDES2)
-
-UTILOBJ1 = util.o system.o charset.o kanji.o fault.o smbencrypt.o charcnv.o
-UTILOBJ2 = $(UTILOBJ1) md4.o loadparm.o params.o pcap.o username.o time.o
-UTILOBJ = $(UTILOBJ2) interface.o replace.o
-PARAMOBJ = $(UTILOBJ) ufc.o smbpass.o access.o shmem.o
-SMBDOBJ1 = $(PARAMOBJ) trans2.o pipes.o message.o dir.o printing.o locking.o
-SMBDOBJ2 = ipc.o reply.o mangle.o chgpasswd.o password.o quotas.o uid.o
-SMBDOBJ = predict.o $(SMBDOBJ1) $(SMBDOBJ2) $(VTP_OBJ)
-NMBDOBJ1 = nmblib.o namepacket.o nameresp.o nmbsync.o nameannounce.o nameelect.o
-NMBDOBJ2 = namedbresp.o namedbwork.o namedbserver.o namedbsubnet.o namedbname.o 
-NMBDOBJ3 = nameservresp.o nameservreply.o namelogon.o namebrowse.o namework.o nameserv.o clientutil.o
-NMBDOBJ = $(UTILOBJ) $(NMBDOBJ1) $(NMBDOBJ2) $(NMBDOBJ3)
-.SUFFIXES:
-.SUFFIXES: .c .o .h
-
-.c.o: $(INCLUDES)
-	@echo Compiling $*.c
-	@$(CC) $(CFLAGS) -c $(srcdir)$*.c
-
-smbd: server.o $(SMBDOBJ)
-	@echo Linking smbd
-	@$(CC) $(CFLAGS) -o smbd server.o $(SMBDOBJ) $(LIBS) $(AFS_LIBS)
-
-smbrun: smbrun.o
-	@echo Linking smbrun
-	@$(CC) $(CFLAGS) -o smbrun smbrun.o $(LIBS)
-
-nmblookup: nmblookup.o namequery.o nmblib.o $(UTILOBJ)  
-	@echo Linking nmblookup
-	@$(CC) $(CFLAGS) -o nmblookup nmblookup.o namequery.o nmblib.o $(UTILOBJ) $(LIBS)
-
-nmbd: nmbd.o $(NMBDOBJ)
-	@echo Linking nmbd
-	@$(CC) $(CFLAGS) -o nmbd nmbd.o $(NMBDOBJ) $(LIBS)
-
-smbclient: client.o clitar.o getsmbpass.o namequery.o nmblib.o $(UTILOBJ) 
-	@echo Linking smbclient
-	@$(CC) $(CFLAGS) -o smbclient client.o clitar.o getsmbpass.o namequery.o nmblib.o $(UTILOBJ) $(LIBS)
-
-smbstatus: status.o $(PARAMOBJ) 
-	@echo Linking smbstatus
-	@$(CC) $(CFLAGS) -o smbstatus status.o $(PARAMOBJ) $(LIBS)
-
-testparm: testparm.o $(PARAMOBJ)
-	@echo Linking testparm
-	@$(CC) $(CFLAGS) -o testparm testparm.o $(PARAMOBJ) $(LIBS)
-
-testprns: testprns.o $(PARAMOBJ)
-	@echo Linking testprns
-	@$(CC) $(CFLAGS) -o testprns testprns.o $(PARAMOBJ) $(LIBS)
-
-smbpasswd: smbpasswd.o getsmbpass.o $(PARAMOBJ)
-	@echo Linking smbpasswd
-	@$(CC) $(CFLAGS) -o smbpasswd smbpasswd.o getsmbpass.o $(PARAMOBJ) $(LIBS)
-
-install: installbin installman installscripts
-
-installbin: all
-	@$(SHELL) $(srcdir)installbin.sh $(INSTALLPERMS) $(BASEDIR) $(SBINDIR) $(LIBDIR) $(VARDIR) $(SPROGS)
-	@$(SHELL) $(srcdir)installbin.sh $(INSTALLPERMS) $(BASEDIR) $(BINDIR) $(LIBDIR) $(VARDIR) $(PROGS)
-
-installscripts:
-	@$(SHELL) $(srcdir)installscripts.sh $(INSTALLPERMS) $(BINDIR) $(SCRIPTS)
-
-# revert to the previously installed version
-revert:
-	@$(SHELL) $(srcdir)revert.sh $(SBINDIR) $(SPROGS) $(SCRIPTS)
-	@$(SHELL) $(srcdir)revert.sh $(BINDIR) $(PROGS) $(SCRIPTS)
-
-installman:
-	@$(SHELL) $(srcdir)installman.sh $(MANDIR) $(srcdir)
-
-uninstall: uninstallman uninstallbin uninstallscripts
-
-uninstallman:
-	@$(SHELL) $(srcdir)uninstallman.sh $(MANDIR) $(srcdir)
-
-uninstallbin:
-	@$(SHELL) $(srcdir)uninstallbin.sh $(INSTALLPERMS) $(BASEDIR) $(SBINDIR) $(LIBDIR) $(VARDIR) $(SPROGS)
-	@$(SHELL) $(srcdir)uninstallbin.sh $(INSTALLPERMS) $(BASEDIR) $(BINDIR) $(LIBDIR) $(VARDIR) $(PROGS)
-
-uninstallscripts:
-	@$(SHELL) $(srcdir)uninstallscripts.sh $(INSTALLPERMS) $(BINDIR) $(SCRIPTS)
-
-clean:
-	rm -f core *.o *~ $(PROGS) $(SPROGS)
-
-proto:
-	@$(SHELL) $(srcdir)checkos.sh $(FLAGSM)
-	$(AWK) -f mkproto.awk *.c > proto.h
-
-realclean: clean
-