r22138: * Sync up with the SAMBA_3_0_25 as of svn r22132.

* Set VERSION to 3.0.25rc1
* Update release notes.

14 files changed, 0 insertions, 1108 deletions

diff --git a/packaging/RedHat-9/README b/packaging/RedHat-9/README
deleted file mode 100644
index 646b10dbbbf..00000000000
--- a/packaging/RedHat-9/README
+++ /dev/null
@@ -1,13 +0,0 @@
-Preparer:	Gerald Carter <jerry@samba.org>
-
-Instructions:	Preparing Samba Packages for Red Hat Linux
-===============================================================
-
-We provide support only for the latest stable release of major 
-branches (e.g 6.2, 7.3, and 8.0).  The makerpms.sh script
-supports rpm  version 2.x, 3.x, and 4.x
-
-To produce the RPMS simply type:
-
-	root# sh makerpms.sh
-
diff --git a/packaging/RedHat-9/filter-requires-samba_rh8.sh b/packaging/RedHat-9/filter-requires-samba_rh8.sh
deleted file mode 100755
index 1fe7aca70ae..00000000000
--- a/packaging/RedHat-9/filter-requires-samba_rh8.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-#!/bin/sh
-
-/usr/lib/rpm/find-requires $* | grep -E -v '(Net::LDAP|Crypt::SmbHash|CGI|Unicode::MapUTF8)'
diff --git a/packaging/RedHat-9/filter-requires-samba_rh9.sh b/packaging/RedHat-9/filter-requires-samba_rh9.sh
deleted file mode 100755
index f90085ce359..00000000000
--- a/packaging/RedHat-9/filter-requires-samba_rh9.sh
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/sh
-
-/usr/lib/rpm/perl.req $* | grep -E -v '(Net::LDAP|Crypt::SmbHash|CGI|Unicode::MapUTF8)'
-
diff --git a/packaging/RedHat-9/makerpms.sh.tmpl b/packaging/RedHat-9/makerpms.sh.tmpl
deleted file mode 100644
index e54467f4931..00000000000
--- a/packaging/RedHat-9/makerpms.sh.tmpl
+++ /dev/null
@@ -1,91 +0,0 @@
-#!/bin/sh
-# Copyright (C) John H Terpstra 1998-2002
-# Updated for RPM 3 by Jochen Wiedmann, joe@ispsoft.de
-# Changed for a generic tar file rebuild by abartlet@pcug.org.au
-# Changed by John H Terpstra to build on RH7.2 - should also work for earlier versions jht@samba.org
-
-# The following allows environment variables to override the target directories
-#   the alternative is to have a file in your home directory calles .rpmmacros
-#   containing the following:
-#   %_topdir  /home/mylogin/redhat
-#
-# Note: Under this directory rpm expects to find the same directories that are under the
-#   /usr/src/redhat directory
-#
-
-SPECDIR=`rpm --eval %_specdir`
-SRCDIR=`rpm --eval %_sourcedir`
-
-# At this point the SPECDIR and SRCDIR vaiables must have a value!
-
-USERID=`id -u`
-GRPID=`id -g`
-VERSION='PVERSION'
-REVISION='PREVISION'
-SPECFILE="samba3.spec"
-RPMVER=`rpm --version | awk '{print $3}'`
-RPM="rpm"
-echo The RPM Version on this machine is: $RPMVER
-
-##
-## fix the mandir macro
-##
-case $RPMVER in
-    [23]*)
-       sed -e "s/MANDIR_MACRO/\%\{prefix\}\/man/g" < samba.spec > $SPECFILE
-       ;;
-    4*)
-       sed -e "s/MANDIR_MACRO/\%\{_mandir\}/g" < samba.spec > $SPECFILE
-       ;;
-    *)
-       echo "Unknown RPM version: `rpm --version`"
-       exit 1
-       ;;
-esac
-
-##
-## now catch the right command to build an RPM (defaults ro 'rpm'
-##
-case $RPMVER in
-    4.[123]*)
-       RPM="rpmbuild"
-       ;;
-esac
-
-echo "RPM build command is \"$RPM\""
-
-pushd .
-cd ../../source
-if [ -f Makefile ]; then
-        make distclean
-fi
-popd
-
-pushd .
-cd ../../../
-chown -R ${USERID}.${GRPID} samba-${VERSION}${REVISION}
-if [ ! -d samba-${VERSION} ]; then
-        ln -s samba-${VERSION}${REVISION} samba-${VERSION} || exit 1
-fi
-echo -n "Creating samba-${VERSION}.tar.bz2 ... "
-tar --exclude=.svn -cf - samba-${VERSION}/. | bzip2 > ${SRCDIR}/samba-${VERSION}.tar.bz2
-echo "Done."
-if [ $? -ne 0 ]; then
-        echo "Build failed!"
-        exit 1
-fi
-
-popd
-
-
-/bin/cp -p filter-requires-samba_rh8.sh ${SRCDIR}
-/bin/cp -p filter-requires-samba_rh9.sh ${SRCDIR}
-chmod 755 ${SRCDIR}/filter-requires-samba_rh?.sh
-/bin/cp -av $SPECFILE ${SPECDIR}
-
-echo Getting Ready to build release package
-cd ${SPECDIR}
-${RPM} -ba --clean --rmsource $SPECFILE
-
-echo Done.
-
diff --git a/packaging/RedHat-9/samba.log b/packaging/RedHat-9/samba.log
deleted file mode 100644
index a3c000ea788..00000000000
--- a/packaging/RedHat-9/samba.log
+++ /dev/null
@@ -1,9 +0,0 @@
-/var/log/samba/*.log /var/log/samba/log.smbd /var/log/samba/log.nmbd {
-    notifempty
-    missingok
-    sharedscripts
-    copytruncate
-    postrotate
-	/bin/kill -HUP `cat /var/run/smbd.pid /var/run/nmbd.pid /var/run/winbindd.pid 2> /dev/null` 2> /dev/null || true
-    endscript
-}
diff --git a/packaging/RedHat-9/samba.pamd b/packaging/RedHat-9/samba.pamd
deleted file mode 100644
index bf7a5b392ca..00000000000
--- a/packaging/RedHat-9/samba.pamd
+++ /dev/null
@@ -1,4 +0,0 @@
-auth		required	/lib/security/pam_pwdb.so nullok
-account		required	/lib/security/pam_pwdb.so
-session		required	/lib/security/pam_pwdb.so
-password	required	/lib/security/pam_pwdb.so # shadow md5 nullok audit
diff --git a/packaging/RedHat-9/samba.pamd.stack b/packaging/RedHat-9/samba.pamd.stack
deleted file mode 100644
index 6a948f92cbd..00000000000
--- a/packaging/RedHat-9/samba.pamd.stack
+++ /dev/null
@@ -1,6 +0,0 @@
-#%PAM-1.0
-auth       required	pam_nologin.so
-auth       required	pam_stack.so service=system-auth
-account    required	pam_stack.so service=system-auth
-session    required	pam_stack.so service=system-auth
-password   required	pam_stack.so service=system-auth
diff --git a/packaging/RedHat-9/samba.spec.tmpl b/packaging/RedHat-9/samba.spec.tmpl
deleted file mode 100644
index 5de6a5fae65..00000000000
--- a/packaging/RedHat-9/samba.spec.tmpl
+++ /dev/null
@@ -1,476 +0,0 @@
-## grab the major and minor version of rpm 
-%define rpm_version `rpm --version | awk '{print $3}' | awk -F. '{print $1$2}'`
-
-Summary: Samba SMB client and server
-Vendor: Samba Team
-Name: samba
-Version: PVERSION
-Release: PRELEASEPRPMREV
-License: GNU GPL version 2
-Group: Networking
-Source: http://download.samba.org/samba/ftp/samba-%{version}.tar.bz2
-
-# Don't depend on Net::LDAP
-# one filter for RH 8 and one for 9
-Source998: filter-requires-samba_rh8.sh
-Source999: filter-requires-samba_rh9.sh
-
-Packager: Gerald Carter [Samba-Team] <jerry@samba.org>
-Requires: pam openldap krb5-libs cups
-BuildRequires: openldap-devel krb5-devel pam-devel cups-devel
-Prereq: chkconfig fileutils /sbin/ldconfig
-Provides: samba = %{version}
-Obsoletes: samba-common, samba-client, samba-swat
-BuildRoot: %{_tmppath}/%{name}-%{version}-root
-Prefix: /usr
-
-%description
-Samba provides an SMB/CIFS server which can be used to provide
-network file and print services to SMB/CIFS clients, including 
-various versions of MS Windows, OS/2, and other Linux machines. 
-Samba also provides some SMB clients, which complement the 
-built-in SMB filesystem in Linux. Samba uses NetBIOS over TCP/IP 
-(NetBT) protocols and does NOT need NetBEUI (Microsoft Raw NetBIOS 
-frame) protocol.
-
-Samba 3.0 also introduces UNICODE support and kerberos/ldap
-integration as a member server in a Windows 2000 domain.
-
-Please refer to the WHATSNEW.txt document for fixup information.
-docs directory for implementation details.
-
-%changelog
-* Mon Nov 18 2002 Gerald Carter <jerry@samba.org>
-  - removed change log entries since history
-    is being maintained in CVS
-
-%prep
-%setup
-
-%build
-
-# Working around perl dependency problem from docs
-# Only > RH 8.0 seems to care here
-
-echo "rpm_version == %{rpm_version}"
-if [ "%{rpm_version}" == "42" ]; then
-   %define __perl_requires %{SOURCE999}
-   echo "%{__perl_requires}"
-elif [ "%{rpm_version}" == "41" ]; then
-   %define __find_requires %{SOURCE998}
-   echo "%{__find_requires}"
-fi
-
-## Build main Samba source
-cd source
-
-%ifarch ia64
-libtoolize --copy --force     # get it to recognize IA-64
-autoheader
-autoconf
-EXTRA="-D_LARGEFILE64_SOURCE"
-%endif
-
-## Get number of cpu's, default for 1 cpu on error 
-NUMCPU=`grep processor /proc/cpuinfo | wc -l`
-if [ $NUMCPU -eq 0 ]; then
-	NUMCPU=1;
-fi 
-
-## run autogen if missing the configure script
-if [ ! -f "configure" ]; then
-	./autogen.sh
-fi
-
-CFLAGS="$RPM_OPT_FLAGS $EXTRA" ./configure \
-	--prefix=%{prefix} \
-	--localstatedir=/var \
-	--with-configdir=/etc/samba \
-	--with-privatedir=/etc/samba \
-	--with-fhs \
-	--with-quotas \
-	--with-smbmount \
-	--enable-cups \
-	--with-pam \
-	--with-pam_smbpass \
-	--with-syslog \
-	--with-utmp \
-	--with-swatdir=%{prefix}/share/swat \
-	--with-shared-modules=idmap_rid \
-	--with-libsmbclient 
-make -j${NUMCPU} proto
-make -j${NUMCPU} all modules nsswitch/libnss_wins.so 
-make -j${NUMCPU} debug2html
-
-# Remove some permission bits to avoid to many dependencies
-cd ..
-find examples docs -type f | xargs -r chmod -x
-
-%install
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/sbin
-mkdir -p $RPM_BUILD_ROOT/etc/samba
-mkdir -p $RPM_BUILD_ROOT/etc/{logrotate.d,pam.d,samba}
-mkdir -p $RPM_BUILD_ROOT/etc/rc.d/init.d
-mkdir -p $RPM_BUILD_ROOT%{prefix}/{bin,sbin}
-mkdir -p $RPM_BUILD_ROOT%{prefix}/share/swat/{help,include,using_samba}
-mkdir -p $RPM_BUILD_ROOT%{prefix}/share/swat/help/using_samba/{figs,gifs}
-mkdir -p $RPM_BUILD_ROOTMANDIR_MACRO
-mkdir -p $RPM_BUILD_ROOT/var/lib/samba
-mkdir -p $RPM_BUILD_ROOT/var/{log,run}/samba
-mkdir -p $RPM_BUILD_ROOT/var/spool/samba
-mkdir -p $RPM_BUILD_ROOT/lib/security
-mkdir -p $RPM_BUILD_ROOT%{prefix}/lib/samba/vfs
-mkdir -p $RPM_BUILD_ROOT%{prefix}/{lib,include}
-
-# Install standard binary files
-for i in nmblookup smbget smbclient smbpasswd smbstatus testparm \
-	rpcclient smbspool smbcacls smbcontrol wbinfo smbmnt net \
-	smbcacls pdbedit eventlogadm tdbbackup smbtree ntlm_auth smbcquotas
-do
-	install -m755 source/bin/$i $RPM_BUILD_ROOT%{prefix}/bin
-done
-
-for i in mksmbpasswd.sh smbtar findsmb
-do
-	install -m755 source/script/$i $RPM_BUILD_ROOT%{prefix}/bin
-done
-
-# Install secure binary files
-for i in smbd nmbd swat smbmount smbumount debug2html winbindd 
-do
-	install -m755 source/bin/$i $RPM_BUILD_ROOT%{prefix}/sbin
-done
-
-# we need a symlink for mount to recognise the smb and smbfs filesystem types
-ln -sf %{prefix}/sbin/smbmount $RPM_BUILD_ROOT/sbin/mount.smbfs
-ln -sf %{prefix}/sbin/smbmount $RPM_BUILD_ROOT/sbin/mount.smb
-
-# This allows us to get away without duplicating code that 
-#  sombody else can maintain for us.  
-cd source
-make DESTDIR=$RPM_BUILD_ROOT \
-	BASEDIR=/usr \
-	CONFIGDIR=/etc/samba \
-	LIBDIR=%{prefix}/lib/samba \
-	VARDIR=/var \
-	SBINDIR=%{prefix}/sbin \
-	BINDIR=%{prefix}/bin \
-	MANDIR=MANDIR_MACRO \
-	SWATDIR=%{prefix}/share/swat \
-	SAMBABOOK=%{prefix}/share/swat/using_samba \
-	installman installswat installdat installmodules
-cd ..
-
-## don't duplicate the docs.  These are installed with SWAT
-rm -rf docs/htmldocs
-rm -rf docs/manpages
-( cd docs; ln -s %{prefix}/share/swat/help htmldocs )
-
-
-
-# Install the nsswitch wins library
-install -m755 source/nsswitch/libnss_wins.so $RPM_BUILD_ROOT/lib
-( cd $RPM_BUILD_ROOT/lib; ln -sf libnss_wins.so libnss_wins.so.2 )
-
-# Install winbind shared libraries
-install -m755 source/nsswitch/libnss_winbind.so $RPM_BUILD_ROOT/lib
-( cd $RPM_BUILD_ROOT/lib; ln -sf libnss_winbind.so libnss_winbind.so.2 )
-install -m755 source/bin/pam_winbind.so $RPM_BUILD_ROOT/lib/security
-
-# Install pam_smbpass.so
-install -m755 source/bin/pam_smbpass.so $RPM_BUILD_ROOT/lib/security
-
-# libsmbclient
-install -m 755 source/bin/libsmbclient.so $RPM_BUILD_ROOT%{prefix}/lib/
-install -m 755 source/bin/libsmbclient.a $RPM_BUILD_ROOT%{prefix}/lib/
-install -m 644 source/include/libsmbclient.h $RPM_BUILD_ROOT%{prefix}/include/
-
-# libmsrpc
-install -m 755 source/bin/libmsrpc.so $RPM_BUILD_ROOT%{prefix}/lib/
-install -m 755 source/bin/libmsrpc.a $RPM_BUILD_ROOT%{prefix}/lib/
-install -m 644 source/include/libmsrpc.h $RPM_BUILD_ROOT%{prefix}/include/
-
-# Install the miscellany
-install -m755 packaging/RedHat-9/smbprint $RPM_BUILD_ROOT%{prefix}/bin
-install -m755 packaging/RedHat-9/smb.init $RPM_BUILD_ROOT/etc/rc.d/init.d/smb
-install -m755 packaging/RedHat-9/winbind.init $RPM_BUILD_ROOT/etc/rc.d/init.d/winbind
-install -m755 packaging/RedHat-9/smb.init $RPM_BUILD_ROOT%{prefix}/sbin/samba
-install -m644 packaging/RedHat-9/samba.log $RPM_BUILD_ROOT/etc/logrotate.d/samba
-install -m644 packaging/RedHat-9/smb.conf $RPM_BUILD_ROOT/etc/samba/smb.conf
-install -m644 packaging/RedHat-9/smbusers $RPM_BUILD_ROOT/etc/samba/smbusers
-install -m644 packaging/RedHat-9/samba.pamd $RPM_BUILD_ROOT/etc/pam.d/samba
-install -m644 packaging/RedHat-9/samba.pamd.stack $RPM_BUILD_ROOT/etc/samba/samba.stack
-install -m644 packaging/RedHat-9/samba.xinetd $RPM_BUILD_ROOT/etc/samba/samba.xinetd
-echo 127.0.0.1 localhost > $RPM_BUILD_ROOT/etc/samba/lmhosts
-
-# Remove "*.old" files
-find $RPM_BUILD_ROOT -name "*.old" -exec rm -f {} \;
-
-##
-## Clean out man pages for tools not installed here
-##
-rm -f $RPM_BUILD_ROOT/%{_mandir}/man1/editreg.1*
-rm -f $RPM_BUILD_ROOT%{_mandir}/man1/log2pcap.1*
-rm -f $RPM_BUILD_ROOT%{_mandir}/man1/smbsh.1*
-rm -f $RPM_BUILD_ROOT/%{_mandir}/man8/mount.cifs.8*
-
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%post
-## 
-## only needed if this is a new install (not an upgrade)
-##
-if [ "$1" -eq "1" ]; then
-	/sbin/chkconfig --add smb
-	/sbin/chkconfig --add winbind
-	/sbin/chkconfig smb off
-	/sbin/chkconfig winbind off
-fi
-
-##
-## we only have to wory about this if we are upgrading
-##
-if [ "$1" -eq "2" ]; then
-	if [ -f /etc/smb.conf -a ! -f /etc/samba/smb.conf ]; then
-		echo "Moving old /etc/smb.conf to /etc/samba/smb.conf"
-		mv /etc/smb.conf /etc/samba/smb.conf
-	fi
-
-	if [ -f /etc/smbusers -a ! -f /etc/samba/smbusers ]; then
-		echo "Moving old /etc/smbusers to /etc/samba/smbusers"
-		mv /etc/smbusers /etc/samba/smbusers
-	fi
-
-	if [ -f /etc/lmhosts -a ! -f /etc/samba/lmhosts ]; then
-		echo "Moving old /etc/lmhosts to /etc/samba/lmhosts"
-		mv /etc/lmhosts /etc/samba/lmhosts
-	fi
-
-	if [ -f /etc/MACHINE.SID -a ! -f /etc/samba/MACHINE.SID ]; then
-		echo "Moving old /etc/MACHINE.SID to /etc/samba/MACHINE.SID"
-		mv /etc/MACHINE.SID /etc/samba/MACHINE.SID
-	fi
-
-	if [ -f /etc/smbpasswd -a ! -f /etc/samba/smbpasswd ]; then
-		echo "Moving old /etc/smbpasswd to /etc/samba/smbpasswd"
-		mv /etc/smbpasswd /etc/samba/smbpasswd
-	fi
-
-	#
-	# For 2.2.1 we move the tdb files from /var/lock/samba to /var/cache/samba
-	# to preserve across reboots.
-	#
-	for i in /var/lock/samba/*.tdb; do
-		if [ -f $i ]; then
-			newname="/var/lib/samba/`basename $i`"
-			echo "Moving $i to $newname"
-			mv $i $newname
-		fi
-	done
-
-	#
-	# For 3.0.1 we move the tdb files from /var/cache/samba to /var/lib/samba
-	#
-	echo "Moving tdb files in /var/cache/samba/*.tdb to /var/lib/samba/*.tdb"
-	for i in /var/cache/samba/*.tdb; do
-		if [ -f $i ]; then
-		        newname="/var/lib/samba/`basename $i`"
-	        	echo "Moving $i to $newname"
-	       		mv $i $newname
-		fi
-	done
-fi
-
-##
-## New things
-##
-
-# Add swat entry to /etc/services if not already there.
-if [ ! "`grep ^\s**swat /etc/services`" ]; then
-	echo 'swat		901/tcp				# Add swat service used via inetd' >> /etc/services
-fi
-
-# Add swat entry to /etc/inetd.conf if needed.
-if [ -f /etc/inetd.conf ]; then
-	if [ ! "`grep ^\s*swat /etc/inetd.conf`" ]; then
-		echo 'swat	stream	tcp	nowait.400	root	%{prefix}/sbin/swat swat' >> /etc/inetd.conf
-	killall -HUP inetd || :
-	fi
-fi
-
-# Add swat entry to xinetd.d if needed.
-if [ -d /etc/xinetd.d -a ! -f /etc/xinetd.d/swat ]; then
-	mv /etc/samba/samba.xinetd /etc/xinetd.d/swat
-else
-	rm -f /etc/samba/samba.xinetd
-fi
-
-# Install the correct version of the samba pam file
-if [ -f /lib/security/pam_stack.so ]; then
-	echo "Installing stack version of /etc/pam.d/samba..."
-	mv /etc/samba/samba.stack /etc/pam.d/samba
-else
-	echo "Installing non-stack version of /etc/pam.d/samba..."
-	rm -f /etc/samba/samba.stack
-fi
-
-## call ldconfig to create the version symlink for libsmbclient.so
-/sbin/ldconfig
-
-%preun
-if [ "$1" -eq "0" ] ; then
-	/sbin/chkconfig --del smb
-	/sbin/chkconfig --del winbind
-
-	# We want to remove the browse.dat and wins.dat files 
-	# so they can not interfer with a new version of samba!
-	if [ -e /var/lib/samba/browse.dat ]; then
-		rm -f /var/lib/samba/browse.dat
-	fi
-	if [ -e /var/lib/samba/wins.dat ]; then
-		rm -f /var/lib/samba/wins.dat
-	fi
-
-	# Remove the transient tdb files.
-	if [ -e /var/lib/samba/brlock.tdb ]; then
-		rm -f /var/lib/samba/brlock.tdb
-	fi
-
-	if [ -e /var/lib/samba/unexpected.tdb ]; then
-		rm -f /var/lib/samba/unexpected.tdb
-	fi
-
-	if [ -e /var/lib/samba/connections.tdb ]; then
-		rm -f /var/lib/samba/connections.tdb
-	fi
-
-	if [ -e /var/lib/samba/locking.tdb ]; then
-		rm -f /var/lib/samba/locking.tdb
-	fi
-
-	if [ -e /var/lib/samba/messages.tdb ]; then
-		rm -f /var/lib/samba/messages.tdb
-	fi
-fi
-
-%postun
-# Only delete remnants of samba if this is the final deletion.
-if [ "$1" -eq  "0" ] ; then
-    if [ -x /etc/pam.d/samba ]; then
-      rm -f /etc/pam.d/samba
-    fi
-
-    if [ -e /var/log/samba ]; then
-      rm -rf /var/log/samba
-    fi
-
-    if [ -e /var/lib/samba ]; then
-      rm -rf /var/lib/samba
-    fi
-
-    # Remove swat entries from /etc/inetd.conf and /etc/services
-    cd /etc
-    tmpfile=/etc/tmp.$$
-    if [ -f /etc/inetd.conf ]; then
-      # preserve inetd.conf permissions.
-      cp -p /etc/inetd.conf $tmpfile
-      sed -e '/^[:space:]*swat.*$/d' /etc/inetd.conf > $tmpfile
-      mv $tmpfile inetd.conf
-    fi
-
-    # preserve services permissions.
-    cp -p /etc/services $tmpfile
-    sed -e '/^[:space:]*swat.*$/d' /etc/services > $tmpfile
-    mv $tmpfile /etc/services
-
-    # Remove swat entry from /etc/xinetd.d
-    if [ -f /etc/xinetd.d/swat ]; then
-      rm -r /etc/xinetd.d/swat
-    fi
-fi
-
-/sbin/ldconfig
-
-%files
-%defattr(-,root,root)
-%doc README COPYING Manifest Read-Manifest-Now
-%doc WHATSNEW.txt Roadmap
-%doc docs
-%doc examples
-%{prefix}/sbin/smbd
-%{prefix}/sbin/nmbd
-%{prefix}/sbin/swat
-%{prefix}/bin/smbmnt
-%{prefix}/sbin/smbmount
-%{prefix}/sbin/smbumount
-%{prefix}/sbin/winbindd
-%{prefix}/sbin/samba
-%{prefix}/sbin/debug2html
-/sbin/mount.smbfs
-/sbin/mount.smb
-%{prefix}/bin/mksmbpasswd.sh
-%{prefix}/bin/smbclient
-%{prefix}/bin/smbget
-%{prefix}/bin/smbspool
-%{prefix}/bin/rpcclient
-%{prefix}/bin/testparm
-%{prefix}/bin/findsmb
-%{prefix}/bin/smbstatus
-%{prefix}/bin/nmblookup
-%{prefix}/bin/smbpasswd
-%{prefix}/bin/smbtar
-%{prefix}/bin/smbprint
-%{prefix}/bin/smbcontrol
-%{prefix}/bin/wbinfo
-%{prefix}/bin/net
-%{prefix}/bin/ntlm_auth
-%{prefix}/bin/smbcquotas
-%{prefix}/bin/smbcacls
-%{prefix}/bin/pdbedit
-%{prefix}/bin/eventlogadm
-%{prefix}/bin/tdbbackup
-%{prefix}/bin/smbtree
-%attr(755,root,root) /lib/libnss_wins.s*
-%attr(755,root,root) %{prefix}/lib/samba/vfs/*.so
-%attr(755,root,root) %{prefix}/lib/samba/auth/*.so
-%attr(755,root,root) %{prefix}/lib/samba/charset/*.so
-%attr(755,root,root) %{prefix}/lib/samba/idmap/*.so
-#%attr(755,root,root) %{prefix}/lib/samba/pdb/*.so
-%attr(755,root,root) %{prefix}/lib/samba/*.dat
-%attr(755,root,root) %{prefix}/lib/samba/*.msg
-%{prefix}/include/libsmbclient.h
-%{prefix}/lib/libsmbclient.a
-%{prefix}/lib/libsmbclient.so
-%{prefix}/include/libmsrpc.h
-%{prefix}/lib/libmsrpc.a
-%{prefix}/lib/libmsrpc.so
-%{prefix}/share/swat/help/*
-%{prefix}/share/swat/using_samba/*
-%{prefix}/share/swat/include/*.html
-%{prefix}/share/swat/images/*
-%{prefix}/share/swat/lang/*/help/*
-%{prefix}/share/swat/lang/*/images/*
-%config(noreplace) /etc/samba/lmhosts
-%config(noreplace) /etc/samba/smb.conf
-%config(noreplace) /etc/samba/smbusers
-/etc/samba/samba.stack
-/etc/samba/samba.xinetd
-/etc/rc.d/init.d/smb
-/etc/rc.d/init.d/winbind
-/etc/logrotate.d/samba
-%config(noreplace) /etc/pam.d/samba
-MANDIR_MACRO/man1/*
-MANDIR_MACRO/man5/*
-MANDIR_MACRO/man7/*
-MANDIR_MACRO/man8/*
-%attr(755,root,root) %dir /var/lib/samba
-%dir /var/log/samba
-%dir /var/run/samba
-%attr(1777,root,root) %dir /var/spool/samba
-%attr(-,root,root) /lib/libnss_winbind.so*
-%attr(-,root,root) /lib/security/pam_winbind.so
-%attr(-,root,root) /lib/security/pam_smbpass.so
diff --git a/packaging/RedHat-9/samba.xinetd b/packaging/RedHat-9/samba.xinetd
deleted file mode 100644
index 8c38b354218..00000000000
--- a/packaging/RedHat-9/samba.xinetd
+++ /dev/null
@@ -1,15 +0,0 @@
-# default: off
-# description: SWAT is the Samba Web Admin Tool. Use swat \
-#	       to configure your Samba server. To use SWAT, \
-#	       connect to port 901 with your favorite web browser.
-service swat
-{
-	port	= 901
-	socket_type	= stream
-	wait 	= no
-	only_from = localhost
-	user	= root
-	server	= /usr/sbin/swat
-	log_on_failure	+= USERID
-	disable = yes
-}
diff --git a/packaging/RedHat-9/smb.conf b/packaging/RedHat-9/smb.conf
deleted file mode 100644
index 971ca19c830..00000000000
--- a/packaging/RedHat-9/smb.conf
+++ /dev/null
@@ -1,271 +0,0 @@
-# This is the main Samba configuration file. You should read the
-# smb.conf(5) manual page in order to understand the options listed
-# here. Samba has a huge number of configurable options (perhaps too
-# many!) most of which are not shown in this example
-#
-# For a step to step guide on installing, configuring and using samba, 
-# read the Samba-HOWTO-Collection. This may be obtained from:
-#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
-#
-# Many working examples of smb.conf files can be found in the 
-# Samba-Guide which is generated daily and can be downloaded from: 
-#  http://www.samba.org/samba/docs/Samba-Guide.pdf
-#
-# Any line which starts with a ; (semi-colon) or a # (hash) 
-# is a comment and is ignored. In this example we will use a #
-# for commentry and a ; for parts of the config file that you
-# may wish to enable
-#
-# NOTE: Whenever you modify this file you should run the command "testparm"
-# to check that you have not made any basic syntactic errors. 
-#
-#======================= Global Settings =====================================
-[global]
-
-# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
-   workgroup = MYGROUP
-
-# server string is the equivalent of the NT Description field
-   server string = Samba Server
-
-# Security mode. Defines in which mode Samba will operate. Possible 
-# values are share, user, server, domain and ads. Most people will want 
-# user level security. See the Samba-HOWTO-Collection for details.
-   security = user
-
-# This option is important for security. It allows you to restrict
-# connections to machines which are on your local network. The
-# following example restricts access to two C class networks and
-# the "loopback" interface. For more examples of the syntax see
-# the smb.conf man page
-;   hosts allow = 192.168.1. 192.168.2. 127.
-
-# If you want to automatically load your printer list rather
-# than setting them up individually then you'll need this
-   load printers = yes
-
-# you may wish to override the location of the printcap file
-;   printcap name = /etc/printcap
-
-# on SystemV system setting printcap name to lpstat should allow
-# you to automatically obtain a printer list from the SystemV spool
-# system
-;   printcap name = lpstat
-
-# It should not be necessary to specify the print system type unless
-# it is non-standard. Currently supported print systems include:
-# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
-;   printing = cups
-
-# Uncomment this if you want a guest account, you must add this to /etc/passwd
-# otherwise the user "nobody" is used
-;  guest account = pcguest
-
-# this tells Samba to use a separate log file for each machine
-# that connects
-   log file = /usr/local/samba/var/log.%m
-
-# Put a capping on the size of the log files (in Kb).
-   max log size = 50
-
-# Use password server option only with security = server
-# The argument list may include:
-#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
-# or to auto-locate the domain controller/s
-#   password server = *
-;   password server = <NT-Server-Name>
-
-# Use the realm option only with security = ads
-# Specifies the Active Directory realm the host is part of
-;   realm = MY_REALM
-
-# Backend to store user information in. New installations should 
-# use either tdbsam or ldapsam. smbpasswd is available for backwards 
-# compatibility. tdbsam requires no further configuration.
-;   passdb backend = tdbsam
-
-# Using the following line enables you to customise your configuration
-# on a per machine basis. The %m gets replaced with the netbios name
-# of the machine that is connecting.
-# Note: Consider carefully the location in the configuration file of
-#       this line.  The included file is read at that point.
-;   include = /usr/local/samba/lib/smb.conf.%m
-
-# Configure Samba to use multiple interfaces
-# If you have multiple network interfaces then you must list them
-# here. See the man page for details.
-;   interfaces = 192.168.12.2/24 192.168.13.2/24 
-
-# Browser Control Options:
-# set local master to no if you don't want Samba to become a master
-# browser on your network. Otherwise the normal election rules apply
-;   local master = no
-
-# OS Level determines the precedence of this server in master browser
-# elections. The default value should be reasonable
-;   os level = 33
-
-# Domain Master specifies Samba to be the Domain Master Browser. This
-# allows Samba to collate browse lists between subnets. Don't use this
-# if you already have a Windows NT domain controller doing this job
-;   domain master = yes 
-
-# Preferred Master causes Samba to force a local browser election on startup
-# and gives it a slightly higher chance of winning the election
-;   preferred master = yes
-
-# Enable this if you want Samba to be a domain logon server for 
-# Windows95 workstations. 
-;   domain logons = yes
-
-# if you enable domain logons then you may want a per-machine or
-# per user logon script
-# run a specific logon batch file per workstation (machine)
-;   logon script = %m.bat
-# run a specific logon batch file per username
-;   logon script = %U.bat
-
-# Where to store roving profiles (only for Win95 and WinNT)
-#        %L substitutes for this servers netbios name, %U is username
-#        You must uncomment the [Profiles] share below
-;   logon path = \\%L\Profiles\%U
-
-# Windows Internet Name Serving Support Section:
-# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
-;   wins support = yes
-
-# WINS Server - Tells the NMBD components of Samba to be a WINS Client
-#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
-;   wins server = w.x.y.z
-
-# WINS Proxy - Tells Samba to answer name resolution queries on
-# behalf of a non WINS capable client, for this to work there must be
-# at least one	WINS Server on the network. The default is NO.
-;   wins proxy = yes
-
-# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
-# via DNS nslookups. The default is NO.
-   dns proxy = no 
-
-# These scripts are used on a domain controller or stand-alone 
-# machine to add or delete corresponding unix accounts
-;  add user script = /usr/sbin/useradd %u
-;  add group script = /usr/sbin/groupadd %g
-;  add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
-;  delete user script = /usr/sbin/userdel %u
-;  delete user from group script = /usr/sbin/deluser %u %g
-;  delete group script = /usr/sbin/groupdel %g
-
-
-#============================ Share Definitions ==============================
-[homes]
-   comment = Home Directories
-   browseable = no
-   writable = yes
-
-# Un-comment the following and create the netlogon directory for Domain Logons
-; [netlogon]
-;   comment = Network Logon Service
-;   path = /usr/local/samba/lib/netlogon
-;   guest ok = yes
-;   writable = no
-;   share modes = no
-
-
-# Un-comment the following to provide a specific roving profile share
-# the default is to use the user's home directory
-;[Profiles]
-;    path = /usr/local/samba/profiles
-;    browseable = no
-;    guest ok = yes
-
-
-# NOTE: If you have a BSD-style print system there is no need to 
-# specifically define each individual printer
-[printers]
-   comment = All Printers
-   path = /usr/spool/samba
-   browseable = no
-# Set public = yes to allow user 'guest account' to print
-   guest ok = no
-   writable = no
-   printable = yes
-
-# This one is useful for people to share files
-;[tmp]
-;   comment = Temporary file space
-;   path = /tmp
-;   read only = no
-;   public = yes
-
-# A publicly accessible directory, but read only, except for people in
-# the "staff" group
-;[public]
-;   comment = Public Stuff
-;   path = /home/samba
-;   public = yes
-;   writable = yes
-;   printable = no
-;   write list = @staff
-
-# Other examples. 
-#
-# A private printer, usable only by fred. Spool data will be placed in fred's
-# home directory. Note that fred must have write access to the spool directory,
-# wherever it is.
-;[fredsprn]
-;   comment = Fred's Printer
-;   valid users = fred
-;   path = /homes/fred
-;   printer = freds_printer
-;   public = no
-;   writable = no
-;   printable = yes
-
-# A private directory, usable only by fred. Note that fred requires write
-# access to the directory.
-;[fredsdir]
-;   comment = Fred's Service
-;   path = /usr/somewhere/private
-;   valid users = fred
-;   public = no
-;   writable = yes
-;   printable = no
-
-# a service which has a different directory for each machine that connects
-# this allows you to tailor configurations to incoming machines. You could
-# also use the %U option to tailor it by user name.
-# The %m gets replaced with the machine name that is connecting.
-;[pchome]
-;  comment = PC Directories
-;  path = /usr/pc/%m
-;  public = no
-;  writable = yes
-
-# A publicly accessible directory, read/write to all users. Note that all files
-# created in the directory by users will be owned by the default user, so
-# any user with access can delete any other user's files. Obviously this
-# directory must be writable by the default user. Another user could of course
-# be specified, in which case all files would be owned by that user instead.
-;[public]
-;   path = /usr/somewhere/else/public
-;   public = yes
-;   only guest = yes
-;   writable = yes
-;   printable = no
-
-# The following two entries demonstrate how to share a directory so that two
-# users can place files there that will be owned by the specific users. In this
-# setup, the directory should be writable by both users and should have the
-# sticky bit set on it to prevent abuse. Obviously this could be extended to
-# as many users as required.
-;[myshare]
-;   comment = Mary's and Fred's stuff
-;   path = /usr/somewhere/shared
-;   valid users = mary fred
-;   public = no
-;   writable = yes
-;   printable = no
-;   create mask = 0765
-
-
diff --git a/packaging/RedHat-9/smb.init b/packaging/RedHat-9/smb.init
deleted file mode 100755
index 9b45ebabb34..00000000000
--- a/packaging/RedHat-9/smb.init
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/sh
-#
-# chkconfig: 345 81 35
-# description: Starts and stops the Samba smbd and nmbd daemons \
-#	       used to provide SMB network services.
-
-# Source function library.
-. /etc/rc.d/init.d/functions
-
-# Source networking configuration.
-. /etc/sysconfig/network
-
-# Check that networking is up.
-[ ${NETWORKING} = "no" ] && exit 0
-
-CONFIG=/etc/samba/smb.conf
-
-# Check that smb.conf exists.
-[ -f $CONFIG ] || exit 0
-
-# See how we were called.
-case "$1" in
-  start)
-	echo -n "Starting SMB services: "
-	daemon smbd -D 	
-	daemon nmbd -D 
-	echo
-	touch /var/lock/subsys/smb
-	;;
-  stop)
-	echo -n "Shutting down SMB services: "
-
-	killproc smbd 
-	killproc nmbd 
-	rm -f /var/lock/subsys/smb
-	echo ""
-	;;
-  status)
-	status smbd
-	status nmbd
-	;;
-  restart)
-	echo -n "Restarting SMB services: "
-	$0 stop
-	$0 start
-	echo "done."
-	;;
-  *)
-	echo "Usage: smb {start|stop|restart|status}"
-	exit 1
-esac
-
diff --git a/packaging/RedHat-9/smbprint b/packaging/RedHat-9/smbprint
deleted file mode 100755
index a0fd2e481b5..00000000000
--- a/packaging/RedHat-9/smbprint
+++ /dev/null
@@ -1,77 +0,0 @@
-#!/bin/sh
-
-# This script is an input filter for printcap printing on a unix machine. It
-# uses the smbclient program to print the file to the specified smb-based 
-# server and service.
-# For example you could have a printcap entry like this
-#
-# smb:lp=/dev/null:sd=/usr/spool/smb:sh:if=/usr/local/samba/smbprint
-#
-# which would create a unix printer called "smb" that will print via this 
-# script. You will need to create the spool directory /usr/spool/smb with
-# appropriate permissions and ownerships for your system.
-
-# Set these to the server and service you wish to print to 
-# In this example I have a WfWg PC called "lapland" that has a printer 
-# exported called "printer" with no password.
-
-#
-# Script further altered by hamiltom@ecnz.co.nz (Michael Hamilton)
-# so that the server, service, and password can be read from 
-# a /var/spool/lpd/PRINTNAME/.config file.
-#
-# In order for this to work the /etc/printcap entry must include an 
-# accounting file (af=...):
-#
-#   cdcolour:\
-#	:cm=CD IBM Colorjet on 6th:\
-#	:sd=/var/spool/lpd/cdcolour:\
-#	:af=/var/spool/lpd/cdcolour/acct:\
-#	:if=/usr/local/etc/smbprint:\
-#	:mx=0:\
-#	:lp=/dev/null:
-#
-# The /usr/var/spool/lpd/PRINTNAME/.config file should contain:
-#   server=PC_SERVER
-#   service=PR_SHARENAME
-#   password="password"
-#
-# E.g.
-#   server=PAULS_PC
-#   service=CJET_371
-#   password=""
-
-#
-# Debugging log file, change to /dev/null if you like.
-#
-# logfile=/tmp/smb-print.log
-logfile=/dev/null
-
-
-#
-# The last parameter to the filter is the accounting file name.
-#   Extract the directory name from the file name.
-#   Concat this with /.config to get the config file.
-#
-eval acct_file=\${$#}
-spool_dir=`dirname $acct_file` 
-config_file=$spool_dir/.config
-
-# Should read the following variables set in the config file:
-#   server
-#   service
-#   password
-eval `cat $config_file`
-
-#
-# Some debugging help, change the >> to > if you want to same space.
-#
-echo "server $server, service $service" >> $logfile
-
-(
-# NOTE You may wish to add the line `echo translate' if you want automatic
-# CR/LF translation when printing.
-#       echo translate
-	echo "print -"
-	cat
-) | /usr/bin/smbclient "\\\\$server\\$service" $password -U $server -N >> $logfile
diff --git a/packaging/RedHat-9/smbusers b/packaging/RedHat-9/smbusers
deleted file mode 100644
index ae3389f53f8..00000000000
--- a/packaging/RedHat-9/smbusers
+++ /dev/null
@@ -1,3 +0,0 @@
-# Unix_name = SMB_name1 SMB_name2 ...
-root = administrator admin
-nobody = guest pcguest smbguest
diff --git a/packaging/RedHat-9/winbind.init b/packaging/RedHat-9/winbind.init
deleted file mode 100644
index 289ca590834..00000000000
--- a/packaging/RedHat-9/winbind.init
+++ /dev/null
@@ -1,84 +0,0 @@
-#!/bin/sh
-#
-# chkconfig: 345 91 45
-# description: Starts and stops the Samba winbind daemon to provide \
-# user and group information from a domain controller to linux.
-
-# Source function library.
-if [ -f /etc/init.d/functions ] ; then
-  . /etc/init.d/functions
-elif [ -f /etc/rc.d/init.d/functions ] ; then
-  . /etc/rc.d/init.d/functions
-else
-  exit 0
-fi
-
-# Source networking configuration.
-. /etc/sysconfig/network
-
-# Check that networking is up.
-[ ${NETWORKING} = "no" ] && exit 0
-
-CONFIG=/etc/samba/smb.conf
-
-# Check that smb.conf exists.
-[ -f $CONFIG ] || exit 0
-
-start() {
-	echo -n "Starting Winbind services: "
-	daemon winbindd 
-	RETVAL=$?
-	echo
-	[ $RETVAL -eq 0 ] && touch /var/lock/subsys/winbind || \
-	   RETVAL=1
-	return $RETVAL
-}	
-stop() {
-	echo -n "Shutting down Winbind services: "
-	killproc winbindd
-	RETVAL=$?
-	echo
-	[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/winbind
-	return $RETVAL
-}	
-restart() {
-	stop
-	start
-}	
-reload() {
-	export TMPDIR="/var/tmp"
-        echo -n "Checking domain trusts: "
-	killproc winbindd -HUP
-	RETVAL=$?
-	echo
-	return $RETVAL
-}	
-mdkstatus() {
-	status winbindd
-}	
-
-case "$1" in
-  start)
-  	start
-	;;
-  stop)
-  	stop
-	;;
-  restart)
-  	restart
-	;;
-  reload)
-  	reload
-	;;
-  status)
-  	mdkstatus
-	;;
-  condrestart)
-  	[ -f /var/lock/subsys/winbindd ] && restart || :
-	;;
-  *)
-	echo "Usage: $0 {start|stop|restart|status|condrestart}"
-	exit 1
-esac
-
-exit $?