s3/docs: Fix several typos.

This fixes bug #6127.
Thanks to Justin T Pryzby <justinpryzby [at] users.sourceforge.net>
for the review!

Karolin

18 files changed, 23 insertions, 26 deletions

diff --git a/docs-xml/smbdotconf/browse/enhancedbrowsing.xml b/docs-xml/smbdotconf/browse/enhancedbrowsing.xml
index 13f2cd64464..7f85616c222 100644
--- a/docs-xml/smbdotconf/browse/enhancedbrowsing.xml
+++ b/docs-xml/smbdotconf/browse/enhancedbrowsing.xml
@@ -17,7 +17,7 @@
 
 	<para>You may wish to disable this option if you have a problem with empty
 	workgroups not disappearing from browse lists. Due to the restrictions
-	of the browse protocols these enhancements can cause a empty workgroup
+	of the browse protocols, these enhancements can cause a empty workgroup
 	to stay around forever which can be annoying.</para>
 
 	<para>In general you should leave this option enabled as it makes
diff --git a/docs-xml/smbdotconf/locking/strictlocking.xml b/docs-xml/smbdotconf/locking/strictlocking.xml
index e3a0ed7b4c5..15ad0ad0739 100644
--- a/docs-xml/smbdotconf/locking/strictlocking.xml
+++ b/docs-xml/smbdotconf/locking/strictlocking.xml
@@ -12,7 +12,7 @@
 	<para>
 	When strict locking is set to Auto (the default), the server performs file lock checks only on non-oplocked files.
 	As most Windows redirectors perform file locking checks locally on oplocked files this is a good trade off for
-	inproved performance.
+	improved performance.
 	</para>
 
 	<para>
diff --git a/docs-xml/smbdotconf/misc/remoteannounce.xml b/docs-xml/smbdotconf/misc/remoteannounce.xml
index f23968b5015..a6bf0c546f5 100644
--- a/docs-xml/smbdotconf/misc/remoteannounce.xml
+++ b/docs-xml/smbdotconf/misc/remoteannounce.xml
@@ -6,7 +6,7 @@
 <description>
 	<para>
 	This option allows you to setup <citerefentry><refentrytitle>nmbd</refentrytitle>
-	<manvolnum>8</manvolnum></citerefentry>to periodically announce itself 
+	<manvolnum>8</manvolnum></citerefentry> to periodically announce itself 
 	to arbitrary IP addresses with an arbitrary workgroup name.
 	</para>
 
@@ -23,7 +23,7 @@
 </programlisting>
 	the above line would cause <command moreinfo="none">nmbd</command> to announce itself 
 	to the two given IP addresses using the given workgroup names. If you leave out the 
-	workgroup name then the one given in the <smbconfoption name="workgroup"/> parameter 
+	workgroup name, then the one given in the <smbconfoption name="workgroup"/> parameter 
 	is used instead.
 	</para>
 
diff --git a/docs-xml/smbdotconf/misc/usershareallowguests.xml b/docs-xml/smbdotconf/misc/usershareallowguests.xml
index 738f3a11bad..a3ae5183b09 100644
--- a/docs-xml/smbdotconf/misc/usershareallowguests.xml
+++ b/docs-xml/smbdotconf/misc/usershareallowguests.xml
@@ -8,7 +8,7 @@
 	to be accessed by non-authenticated users or not. It is the equivalent
 	of allowing people who can create a share the option of setting
 	<parameter moreinfo="none">guest ok = yes</parameter> in a share
-	definition. Due to the security sensitive nature of this the default
+	definition. Due to its security sensitive nature, the default
 	is set to off.</para>
 
 </description>
diff --git a/docs-xml/smbdotconf/misc/usershareprefixallowlist.xml b/docs-xml/smbdotconf/misc/usershareprefixallowlist.xml
index bacc2e9530e..6c1822a1658 100644
--- a/docs-xml/smbdotconf/misc/usershareprefixallowlist.xml
+++ b/docs-xml/smbdotconf/misc/usershareprefixallowlist.xml
@@ -6,8 +6,8 @@
 <description>
 	<para>This parameter specifies a list of absolute pathnames
 	the root of which are allowed to be exported by user defined share definitions.
-	If the pathname exported doesn't start with one of the strings in this
-	list the user defined share will not be allowed. This allows the Samba
+	If the pathname to be exported doesn't start with one of the strings in this
+	list, the user defined share will not be allowed. This allows the Samba
 	administrator to restrict the directories on the system that can be
 	exported by user defined shares.
 	</para>
diff --git a/docs-xml/smbdotconf/misc/usersharetemplateshare.xml b/docs-xml/smbdotconf/misc/usersharetemplateshare.xml
index efe2e81d22c..9593a6c7e4a 100644
--- a/docs-xml/smbdotconf/misc/usersharetemplateshare.xml
+++ b/docs-xml/smbdotconf/misc/usersharetemplateshare.xml
@@ -5,7 +5,7 @@
 		 xmlns:samba="http://www.samba.org/samba/DTD/samba-doc">
 <description>
 	<para>User defined shares only have limited possible parameters
-	such as path, guest ok etc. This parameter allows usershares to
+	such as path, guest ok, etc. This parameter allows usershares to
 	"cloned" from an existing share. If "usershare template share"
 	is set to the name of an existing share, then all usershares
 	created have their defaults set from the parameters set on this
diff --git a/docs-xml/smbdotconf/printing/useclientdriver.xml b/docs-xml/smbdotconf/printing/useclientdriver.xml
index 99e85568110..4d9b7abfccc 100644
--- a/docs-xml/smbdotconf/printing/useclientdriver.xml
+++ b/docs-xml/smbdotconf/printing/useclientdriver.xml
@@ -29,7 +29,7 @@
     <para>If this parameter is enabled for a printer, then any attempt
     to open the printer with the PRINTER_ACCESS_ADMINISTER right is mapped
     to PRINTER_ACCESS_USE instead.  Thus allowing the OpenPrinterEx()
-    call to succeed.  <emphasis>This parameter MUST not be able enabled
+    call to succeed.  <emphasis>This parameter MUST not be enabled
     on a print share which has valid print driver installed on the Samba 
 	server.</emphasis></para>
 </description>
diff --git a/docs-xml/smbdotconf/protocol/aclcheckpermissions.xml b/docs-xml/smbdotconf/protocol/aclcheckpermissions.xml
index 69162617596..79b6da7afa5 100644
--- a/docs-xml/smbdotconf/protocol/aclcheckpermissions.xml
+++ b/docs-xml/smbdotconf/protocol/aclcheckpermissions.xml
@@ -21,7 +21,7 @@
     and allows the open. If the user doesn't have permission to delete the file this will only be
     discovered at close time, which is too late for the Windows user tools to display an error message
     to the user. The symptom of this is files that appear to have been deleted "magically" re-appearing
-    on a Windows explorer refersh. This is an extremely advanced protocol option which should not
+    on a Windows explorer refresh. This is an extremely advanced protocol option which should not
     need to be changed. This parameter was introduced in its final form in 3.0.21, an earlier version
     with slightly different semantics was introduced in 3.0.20. That older version is not documented here.
     </para>
diff --git a/docs-xml/smbdotconf/protocol/enableasusupport.xml b/docs-xml/smbdotconf/protocol/enableasusupport.xml
index cd4f30fb8d6..bb56b5ad0bd 100644
--- a/docs-xml/smbdotconf/protocol/enableasusupport.xml
+++ b/docs-xml/smbdotconf/protocol/enableasusupport.xml
@@ -5,7 +5,7 @@
                  xmlns:samba="http://www.samba.org/samba/DTD/samba-doc">
 <description>
     <para>Hosts running the "Advanced Server for Unix (ASU)" product 
-    require some special accomodations such as creating a builting [ADMIN$] 
+    require some special accomodations such as creating a builtin [ADMIN$] 
     share that only supports IPC connections.  The has been the default
     behavior in smbd for many years.  However, certain Microsoft applications
     such as the Print Migrator tool require that the remote server support
diff --git a/docs-xml/smbdotconf/security/clientlanmanauth.xml b/docs-xml/smbdotconf/security/clientlanmanauth.xml
index 5266fef6a24..967eacf85bb 100644
--- a/docs-xml/smbdotconf/security/clientlanmanauth.xml
+++ b/docs-xml/smbdotconf/security/clientlanmanauth.xml
@@ -11,7 +11,7 @@
     password hashes (e.g. Windows NT/2000, Samba, etc... but not 
     Windows 95/98) will be able to be connected from the Samba client.</para>
 
-    <para>The LANMAN encrypted response is easily broken, due to it's
+    <para>The LANMAN encrypted response is easily broken, due to its
     case-insensitive nature, and the choice of algorithm.  Clients
     without Windows 95/98 servers are advised to disable
     this option.  </para>
diff --git a/docs-xml/smbdotconf/security/clientsigning.xml b/docs-xml/smbdotconf/security/clientsigning.xml
index bf37cbb8746..c657e057118 100644
--- a/docs-xml/smbdotconf/security/clientsigning.xml
+++ b/docs-xml/smbdotconf/security/clientsigning.xml
@@ -4,8 +4,7 @@
                  basic="1"
 		 xmlns:samba="http://www.samba.org/samba/DTD/samba-doc">
 <description>
-    <para>This controls whether the client offers or requires
-    the server it talks to to use SMB signing. Possible values 
+    <para>This controls whether the client is allowed or required to use SMB signing. Possible values 
     are <emphasis>auto</emphasis>, <emphasis>mandatory</emphasis> 
     and <emphasis>disabled</emphasis>. 
     </para>
diff --git a/docs-xml/smbdotconf/security/lanmanauth.xml b/docs-xml/smbdotconf/security/lanmanauth.xml
index 341952205f6..4e68c5e03aa 100644
--- a/docs-xml/smbdotconf/security/lanmanauth.xml
+++ b/docs-xml/smbdotconf/security/lanmanauth.xml
@@ -12,7 +12,7 @@
     Windows 95/98 or the MS DOS network client) will be able to
     connect to the Samba host.</para>
 
-    <para>The LANMAN encrypted response is easily broken, due to it's
+    <para>The LANMAN encrypted response is easily broken, due to its
     case-insensitive nature, and the choice of algorithm.  Servers
     without Windows 95/98/ME or MS DOS clients are advised to disable
     this option.  </para>
diff --git a/docs-xml/smbdotconf/security/passwordserver.xml b/docs-xml/smbdotconf/security/passwordserver.xml
index 0da247d27d5..0e92af9ebae 100644
--- a/docs-xml/smbdotconf/security/passwordserver.xml
+++ b/docs-xml/smbdotconf/security/passwordserver.xml
@@ -7,7 +7,7 @@
     <para>By specifying the name of another SMB server 
     or Active Directory domain controller with this option, 
     and using <command moreinfo="none">security = [ads|domain|server]</command> 
-    it is possible to get Samba to 
+    it is possible to get Samba
     to do all its username/password validation using a specific remote server.</para>
 
     <para>This option sets the name or IP address of the password server to use. 
diff --git a/docs-xml/smbdotconf/security/security.xml b/docs-xml/smbdotconf/security/security.xml
index 3ad5175712e..514ea54e0ff 100644
--- a/docs-xml/smbdotconf/security/security.xml
+++ b/docs-xml/smbdotconf/security/security.xml
@@ -47,7 +47,7 @@
     want to mainly setup shares without a password (guest shares). This 
     is commonly used for a shared printer server. It is more difficult 
     to setup guest shares with <command moreinfo="none">security = user</command>, see 
-    the <smbconfoption name="map to guest"/>parameter for details.</para>
+    the <smbconfoption name="map to guest"/> parameter for details.</para>
 		
     <para>It is possible to use <command moreinfo="none">smbd</command> in a <emphasis>
     hybrid mode</emphasis> where it is offers both user and share 
@@ -58,7 +58,7 @@
 
     <para><anchor id="SECURITYEQUALSSHARE"/><emphasis>SECURITY = SHARE</emphasis></para> 
 		
-    <para>When clients connect to a share level security server they 
+    <para>When clients connect to a share level security server, they 
     need not log onto the server with a valid username and password before 
     attempting to connect to a shared resource (although modern clients 
     such as Windows 95/98 and Windows NT will send a logon request with 
@@ -211,7 +211,7 @@
 	</para></note>
 
 	<note><para>From the client's point of 
-    view <command moreinfo="none">security = server</command> is the
+    view, <command moreinfo="none">security = server</command> is the
     same as <command moreinfo="none">security = user</command>.  It
     only affects how the server deals  with the authentication, it does
 	not in any way affect what the  client sees.</para></note>
diff --git a/docs-xml/smbdotconf/security/serverschannel.xml b/docs-xml/smbdotconf/security/serverschannel.xml
index 6317448fb62..655463576f3 100644
--- a/docs-xml/smbdotconf/security/serverschannel.xml
+++ b/docs-xml/smbdotconf/security/serverschannel.xml
@@ -13,7 +13,7 @@
 	</para>
 
     <para>
-	Please note that with this set to <literal>no</literal> you will have to apply the WindowsXP
+	Please note that with this set to <literal>no</literal>, you will have to apply the WindowsXP
 	<filename>WinXP_SignOrSeal.reg</filename> registry patch found in the docs/registry subdirectory of the Samba distribution tarball.
 	</para>
 </description>
diff --git a/docs-xml/smbdotconf/security/serversigning.xml b/docs-xml/smbdotconf/security/serversigning.xml
index f2f56295861..ea21a2c6f64 100644
--- a/docs-xml/smbdotconf/security/serversigning.xml
+++ b/docs-xml/smbdotconf/security/serversigning.xml
@@ -5,8 +5,7 @@
 		 xmlns:samba="http://www.samba.org/samba/DTD/samba-doc">
 <description>
 
-    <para>This controls whether the server offers or requires
-    the client it talks to to use SMB signing. Possible values 
+    <para>This controls whether the client is allowed or required to use SMB signing. Possible values 
     are <emphasis>auto</emphasis>, <emphasis>mandatory</emphasis> 
     and <emphasis>disabled</emphasis>. 
     </para>
diff --git a/docs-xml/smbdotconf/security/smbencrypt.xml b/docs-xml/smbdotconf/security/smbencrypt.xml
index eb91ce51fa3..d5561669536 100644
--- a/docs-xml/smbdotconf/security/smbencrypt.xml
+++ b/docs-xml/smbdotconf/security/smbencrypt.xml
@@ -16,8 +16,7 @@
     and MacOS/X clients. Windows clients do not support this feature.
     </para>
 
-    <para>This controls whether the server offers or requires
-    the client it talks to to use SMB encryption. Possible values 
+    <para>This controls whether the remote client is allowed or required to use SMB encryption. Possible values 
     are <emphasis>auto</emphasis>, <emphasis>mandatory</emphasis> 
     and <emphasis>disabled</emphasis>. This may be set on a per-share
     basis, but clients may chose to encrypt the entire session, not
diff --git a/docs-xml/smbdotconf/security/updateencrypted.xml b/docs-xml/smbdotconf/security/updateencrypted.xml
index da493665cf2..eb54ed9bab6 100644
--- a/docs-xml/smbdotconf/security/updateencrypted.xml
+++ b/docs-xml/smbdotconf/security/updateencrypted.xml
@@ -9,7 +9,7 @@
 	This boolean parameter allows a user logging on with a plaintext password to have their encrypted (hashed)
 	password in the smbpasswd file to be updated automatically as they log on. This option allows a site to
 	migrate from plaintext password authentication (users authenticate with plaintext password over the
-	wire, and are checked against a UNIX account atabase) to encrypted password authentication (the SMB
+	wire, and are checked against a UNIX account database) to encrypted password authentication (the SMB
 	challenge/response authentication mechanism) without forcing all users to re-enter their passwords via
 	smbpasswd at the time the change is made. This is a convenience option to allow the change over to encrypted
 	passwords to be made over a longer period.  Once all users have encrypted representations of their passwords
@@ -24,7 +24,7 @@
 	</para>
 
     <para>
-	Note that even when this parameter is set a user authenticating to <command moreinfo="none">smbd</command>
+	Note that even when this parameter is set, a user authenticating to <command moreinfo="none">smbd</command>
 	must still enter a valid password in order to connect correctly, and to update their hashed (smbpasswd)
 	passwords.
 	</para>