r16752: remove the 'socket options' setting from the shipped default smb.conf

4 files changed, 180 insertions, 238 deletions

diff --git a/examples/smb.conf.default b/examples/smb.conf.default
index 58d38aa9f7d..971ca19c830 100644
--- a/examples/smb.conf.default
+++ b/examples/smb.conf.default
@@ -91,13 +91,6 @@
 #       this line.  The included file is read at that point.
 ;   include = /usr/local/samba/lib/smb.conf.%m
 
-# Most people will find that this option gives better performance.
-# See the chapter 'Samba performance issues' in the Samba HOWTO Collection
-# and the manual pages for details.
-# You may want to add the following on a Linux system:
-#         SO_RCVBUF=8192 SO_SNDBUF=8192
-   socket options = TCP_NODELAY 
-
 # Configure Samba to use multiple interfaces
 # If you have multiple network interfaces then you must list them
 # here. See the man page for details.
diff --git a/packaging/RHEL/setup/smb.conf b/packaging/RHEL/setup/smb.conf
index 133e442b1e7..971ca19c830 100644
--- a/packaging/RHEL/setup/smb.conf
+++ b/packaging/RHEL/setup/smb.conf
@@ -3,6 +3,14 @@
 # here. Samba has a huge number of configurable options (perhaps too
 # many!) most of which are not shown in this example
 #
+# For a step to step guide on installing, configuring and using samba, 
+# read the Samba-HOWTO-Collection. This may be obtained from:
+#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
+#
+# Many working examples of smb.conf files can be found in the 
+# Samba-Guide which is generated daily and can be downloaded from: 
+#  http://www.samba.org/samba/docs/Samba-Guide.pdf
+#
 # Any line which starts with a ; (semi-colon) or a # (hash) 
 # is a comment and is ignored. In this example we will use a #
 # for commentry and a ; for parts of the config file that you
@@ -14,12 +22,17 @@
 #======================= Global Settings =====================================
 [global]
 
-# workgroup = NT-Domain-Name or Workgroup-Name
+# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
    workgroup = MYGROUP
 
 # server string is the equivalent of the NT Description field
    server string = Samba Server
 
+# Security mode. Defines in which mode Samba will operate. Possible 
+# values are share, user, server, domain and ads. Most people will want 
+# user level security. See the Samba-HOWTO-Collection for details.
+   security = user
+
 # This option is important for security. It allows you to restrict
 # connections to machines which are on your local network. The
 # following example restricts access to two C class networks and
@@ -27,15 +40,22 @@
 # the smb.conf man page
 ;   hosts allow = 192.168.1. 192.168.2. 127.
 
-# if you want to automatically load your printer list rather
+# If you want to automatically load your printer list rather
 # than setting them up individually then you'll need this
-   printcap name = /etc/printcap
    load printers = yes
 
-# It should not be necessary to spell out the print system type unless
-# yours is non-standard. Currently supported print systems include:
-# bsd, sysv, plp, lprng, aix, hpux, qnx
-;   printing = bsd
+# you may wish to override the location of the printcap file
+;   printcap name = /etc/printcap
+
+# on SystemV system setting printcap name to lpstat should allow
+# you to automatically obtain a printer list from the SystemV spool
+# system
+;   printcap name = lpstat
+
+# It should not be necessary to specify the print system type unless
+# it is non-standard. Currently supported print systems include:
+# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
+;   printing = cups
 
 # Uncomment this if you want a guest account, you must add this to /etc/passwd
 # otherwise the user "nobody" is used
@@ -43,64 +63,39 @@
 
 # this tells Samba to use a separate log file for each machine
 # that connects
-   #log file = /var/log/samba/%m.log
-# all information in one file
-   log file = /var/log/samba/log.smbd
+   log file = /usr/local/samba/var/log.%m
 
 # Put a capping on the size of the log files (in Kb).
    max log size = 50
 
-# Security mode. Most people will want user level security. See
-# security_level.txt for details.
-   security = user
 # Use password server option only with security = server
+# The argument list may include:
+#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
+# or to auto-locate the domain controller/s
+#   password server = *
 ;   password server = <NT-Server-Name>
 
-# Password Level allows matching of _n_ characters of the password for
-# all combinations of upper and lower case.
-;  password level = 8
-;  username level = 8
-
-# You may wish to use password encryption. Please read
-# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
-# Do not enable this option unless you have read those documents
-;  encrypt passwords = yes
-;  smb passwd file = /etc/samba/smbpasswd
-
-# The following are needed to allow password changing from Windows to
-# update the Linux system password also.
-# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
-# NOTE2: You do NOT need these to allow workstations to change only
-#        the encrypted SMB passwords. They allow the Unix password
-#        to be kept in sync with the SMB password.
-;  unix password sync = Yes
-;  passwd program = /usr/bin/passwd %u
-;  passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*
-
-# Unix users can map to different SMB User names
-;  username map = /etc/samba/smbusers
+# Use the realm option only with security = ads
+# Specifies the Active Directory realm the host is part of
+;   realm = MY_REALM
+
+# Backend to store user information in. New installations should 
+# use either tdbsam or ldapsam. smbpasswd is available for backwards 
+# compatibility. tdbsam requires no further configuration.
+;   passdb backend = tdbsam
 
 # Using the following line enables you to customise your configuration
 # on a per machine basis. The %m gets replaced with the netbios name
-# of the machine that is connecting
-;   include = /etc/samba/smb.conf.%m
-
-# Most people will find that this option gives better performance.
-# See speed.txt and the manual pages for details
-   socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
+# of the machine that is connecting.
+# Note: Consider carefully the location in the configuration file of
+#       this line.  The included file is read at that point.
+;   include = /usr/local/samba/lib/smb.conf.%m
 
 # Configure Samba to use multiple interfaces
 # If you have multiple network interfaces then you must list them
 # here. See the man page for details.
 ;   interfaces = 192.168.12.2/24 192.168.13.2/24 
 
-# Configure remote browse list synchronisation here
-#  request announcement to, or browse list sync from:
-#	a specific host or from / to a whole subnet (see below)
-;   remote browse sync = 192.168.3.25 192.168.5.255
-# Cause this host to announce itself to local subnets here
-;   remote announce = 192.168.1.255 192.168.2.44
-
 # Browser Control Options:
 # set local master to no if you don't want Samba to become a master
 # browser on your network. Otherwise the normal election rules apply
@@ -135,19 +130,6 @@
 #        You must uncomment the [Profiles] share below
 ;   logon path = \\%L\Profiles\%U
 
-# All NetBIOS names must be resolved to IP Addresses
-# 'Name Resolve Order' allows the named resolution mechanism to be specified
-# the default order is "host lmhosts wins bcast". "host" means use the unix
-# system gethostbyname() function call that will use either /etc/hosts OR
-# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
-# and the /etc/resolv.conf file. "host" therefore is system configuration
-# dependant. This parameter is most often of use to prevent DNS lookups
-# in order to resolve NetBIOS names to IP Addresses. Use with care!
-# The example below excludes use of name resolution for machines that are NOT
-# on the local network segment
-# - OR - are not deliberately to be known via lmhosts or via WINS.
-; name resolve order = wins lmhosts bcast
-
 # Windows Internet Name Serving Support Section:
 # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
 ;   wins support = yes
@@ -162,18 +144,18 @@
 ;   wins proxy = yes
 
 # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
-# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
-# this has been changed in version 1.9.18 to no.
+# via DNS nslookups. The default is NO.
    dns proxy = no 
 
-# Case Preservation can be handy - system default is _no_
-# NOTE: These can be set on a per share basis
-;  preserve case = no
-;  short preserve case = no
-# Default case is normally upper case for all DOS files
-;  default case = lower
-# Be very careful with case sensitivity - it can break things!
-;  case sensitive = no
+# These scripts are used on a domain controller or stand-alone 
+# machine to add or delete corresponding unix accounts
+;  add user script = /usr/sbin/useradd %u
+;  add group script = /usr/sbin/groupadd %g
+;  add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
+;  delete user script = /usr/sbin/userdel %u
+;  delete user from group script = /usr/sbin/deluser %u %g
+;  delete group script = /usr/sbin/groupdel %g
+
 
 #============================ Share Definitions ==============================
 [homes]
@@ -184,7 +166,7 @@
 # Un-comment the following and create the netlogon directory for Domain Logons
 ; [netlogon]
 ;   comment = Network Logon Service
-;   path = /home/netlogon
+;   path = /usr/local/samba/lib/netlogon
 ;   guest ok = yes
 ;   writable = no
 ;   share modes = no
@@ -193,7 +175,7 @@
 # Un-comment the following to provide a specific roving profile share
 # the default is to use the user's home directory
 ;[Profiles]
-;    path = /home/profiles
+;    path = /usr/local/samba/profiles
 ;    browseable = no
 ;    guest ok = yes
 
@@ -202,7 +184,7 @@
 # specifically define each individual printer
 [printers]
    comment = All Printers
-   path = /var/spool/samba
+   path = /usr/spool/samba
    browseable = no
 # Set public = yes to allow user 'guest account' to print
    guest ok = no
@@ -222,7 +204,8 @@
 ;   comment = Public Stuff
 ;   path = /home/samba
 ;   public = yes
-;   read only = yes
+;   writable = yes
+;   printable = no
 ;   write list = @staff
 
 # Other examples. 
@@ -251,7 +234,7 @@
 
 # a service which has a different directory for each machine that connects
 # this allows you to tailor configurations to incoming machines. You could
-# also use the %u option to tailor it by user name.
+# also use the %U option to tailor it by user name.
 # The %m gets replaced with the machine name that is connecting.
 ;[pchome]
 ;  comment = PC Directories
diff --git a/packaging/RedHat-9/smb.conf b/packaging/RedHat-9/smb.conf
index ba64dad729c..971ca19c830 100644
--- a/packaging/RedHat-9/smb.conf
+++ b/packaging/RedHat-9/smb.conf
@@ -3,6 +3,14 @@
 # here. Samba has a huge number of configurable options (perhaps too
 # many!) most of which are not shown in this example
 #
+# For a step to step guide on installing, configuring and using samba, 
+# read the Samba-HOWTO-Collection. This may be obtained from:
+#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
+#
+# Many working examples of smb.conf files can be found in the 
+# Samba-Guide which is generated daily and can be downloaded from: 
+#  http://www.samba.org/samba/docs/Samba-Guide.pdf
+#
 # Any line which starts with a ; (semi-colon) or a # (hash) 
 # is a comment and is ignored. In this example we will use a #
 # for commentry and a ; for parts of the config file that you
@@ -14,12 +22,17 @@
 #======================= Global Settings =====================================
 [global]
 
-# workgroup = NT-Domain-Name or Workgroup-Name
+# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
    workgroup = MYGROUP
 
 # server string is the equivalent of the NT Description field
    server string = Samba Server
 
+# Security mode. Defines in which mode Samba will operate. Possible 
+# values are share, user, server, domain and ads. Most people will want 
+# user level security. See the Samba-HOWTO-Collection for details.
+   security = user
+
 # This option is important for security. It allows you to restrict
 # connections to machines which are on your local network. The
 # following example restricts access to two C class networks and
@@ -27,15 +40,22 @@
 # the smb.conf man page
 ;   hosts allow = 192.168.1. 192.168.2. 127.
 
-# if you want to automatically load your printer list rather
+# If you want to automatically load your printer list rather
 # than setting them up individually then you'll need this
-   printcap name = /etc/printcap
    load printers = yes
 
-# It should not be necessary to spell out the print system type unless
-# yours is non-standard. Currently supported print systems include:
-# bsd, sysv, plp, lprng, aix, hpux, qnx
-;   printing = bsd
+# you may wish to override the location of the printcap file
+;   printcap name = /etc/printcap
+
+# on SystemV system setting printcap name to lpstat should allow
+# you to automatically obtain a printer list from the SystemV spool
+# system
+;   printcap name = lpstat
+
+# It should not be necessary to specify the print system type unless
+# it is non-standard. Currently supported print systems include:
+# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
+;   printing = cups
 
 # Uncomment this if you want a guest account, you must add this to /etc/passwd
 # otherwise the user "nobody" is used
@@ -43,64 +63,39 @@
 
 # this tells Samba to use a separate log file for each machine
 # that connects
-   # log file = /var/log/samba/%m.log
-# all log information in one file
-   log file = /var/log/samba/log.smbd
+   log file = /usr/local/samba/var/log.%m
 
 # Put a capping on the size of the log files (in Kb).
    max log size = 50
 
-# Security mode. Most people will want user level security. See
-# security_level.txt for details.
-   security = user
 # Use password server option only with security = server
+# The argument list may include:
+#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
+# or to auto-locate the domain controller/s
+#   password server = *
 ;   password server = <NT-Server-Name>
 
-# Password Level allows matching of _n_ characters of the password for
-# all combinations of upper and lower case.
-;  password level = 8
-;  username level = 8
-
-# You may wish to use password encryption. Please read
-# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
-# Do not enable this option unless you have read those documents
-;  encrypt passwords = yes
-;  smb passwd file = /etc/samba/smbpasswd
-
-# The following are needed to allow password changing from Windows to
-# update the Linux system password also.
-# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
-# NOTE2: You do NOT need these to allow workstations to change only
-#        the encrypted SMB passwords. They allow the Unix password
-#        to be kept in sync with the SMB password.
-;  unix password sync = Yes
-;  passwd program = /usr/bin/passwd %u
-;  passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*
-
-# Unix users can map to different SMB User names
-;  username map = /etc/samba/smbusers
+# Use the realm option only with security = ads
+# Specifies the Active Directory realm the host is part of
+;   realm = MY_REALM
+
+# Backend to store user information in. New installations should 
+# use either tdbsam or ldapsam. smbpasswd is available for backwards 
+# compatibility. tdbsam requires no further configuration.
+;   passdb backend = tdbsam
 
 # Using the following line enables you to customise your configuration
 # on a per machine basis. The %m gets replaced with the netbios name
-# of the machine that is connecting
-;   include = /etc/samba/smb.conf.%m
-
-# Most people will find that this option gives better performance.
-# See speed.txt and the manual pages for details
-   socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
+# of the machine that is connecting.
+# Note: Consider carefully the location in the configuration file of
+#       this line.  The included file is read at that point.
+;   include = /usr/local/samba/lib/smb.conf.%m
 
 # Configure Samba to use multiple interfaces
 # If you have multiple network interfaces then you must list them
 # here. See the man page for details.
 ;   interfaces = 192.168.12.2/24 192.168.13.2/24 
 
-# Configure remote browse list synchronisation here
-#  request announcement to, or browse list sync from:
-#	a specific host or from / to a whole subnet (see below)
-;   remote browse sync = 192.168.3.25 192.168.5.255
-# Cause this host to announce itself to local subnets here
-;   remote announce = 192.168.1.255 192.168.2.44
-
 # Browser Control Options:
 # set local master to no if you don't want Samba to become a master
 # browser on your network. Otherwise the normal election rules apply
@@ -135,19 +130,6 @@
 #        You must uncomment the [Profiles] share below
 ;   logon path = \\%L\Profiles\%U
 
-# All NetBIOS names must be resolved to IP Addresses
-# 'Name Resolve Order' allows the named resolution mechanism to be specified
-# the default order is "host lmhosts wins bcast". "host" means use the unix
-# system gethostbyname() function call that will use either /etc/hosts OR
-# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
-# and the /etc/resolv.conf file. "host" therefore is system configuration
-# dependant. This parameter is most often of use to prevent DNS lookups
-# in order to resolve NetBIOS names to IP Addresses. Use with care!
-# The example below excludes use of name resolution for machines that are NOT
-# on the local network segment
-# - OR - are not deliberately to be known via lmhosts or via WINS.
-; name resolve order = wins lmhosts bcast
-
 # Windows Internet Name Serving Support Section:
 # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
 ;   wins support = yes
@@ -162,18 +144,18 @@
 ;   wins proxy = yes
 
 # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
-# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
-# this has been changed in version 1.9.18 to no.
+# via DNS nslookups. The default is NO.
    dns proxy = no 
 
-# Case Preservation can be handy - system default is _no_
-# NOTE: These can be set on a per share basis
-;  preserve case = no
-;  short preserve case = no
-# Default case is normally upper case for all DOS files
-;  default case = lower
-# Be very careful with case sensitivity - it can break things!
-;  case sensitive = no
+# These scripts are used on a domain controller or stand-alone 
+# machine to add or delete corresponding unix accounts
+;  add user script = /usr/sbin/useradd %u
+;  add group script = /usr/sbin/groupadd %g
+;  add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
+;  delete user script = /usr/sbin/userdel %u
+;  delete user from group script = /usr/sbin/deluser %u %g
+;  delete group script = /usr/sbin/groupdel %g
+
 
 #============================ Share Definitions ==============================
 [homes]
@@ -184,7 +166,7 @@
 # Un-comment the following and create the netlogon directory for Domain Logons
 ; [netlogon]
 ;   comment = Network Logon Service
-;   path = /home/netlogon
+;   path = /usr/local/samba/lib/netlogon
 ;   guest ok = yes
 ;   writable = no
 ;   share modes = no
@@ -193,7 +175,7 @@
 # Un-comment the following to provide a specific roving profile share
 # the default is to use the user's home directory
 ;[Profiles]
-;    path = /home/profiles
+;    path = /usr/local/samba/profiles
 ;    browseable = no
 ;    guest ok = yes
 
@@ -202,7 +184,7 @@
 # specifically define each individual printer
 [printers]
    comment = All Printers
-   path = /var/spool/samba
+   path = /usr/spool/samba
    browseable = no
 # Set public = yes to allow user 'guest account' to print
    guest ok = no
@@ -222,7 +204,8 @@
 ;   comment = Public Stuff
 ;   path = /home/samba
 ;   public = yes
-;   read only = yes
+;   writable = yes
+;   printable = no
 ;   write list = @staff
 
 # Other examples. 
@@ -251,7 +234,7 @@
 
 # a service which has a different directory for each machine that connects
 # this allows you to tailor configurations to incoming machines. You could
-# also use the %u option to tailor it by user name.
+# also use the %U option to tailor it by user name.
 # The %m gets replaced with the machine name that is connecting.
 ;[pchome]
 ;  comment = PC Directories
diff --git a/packaging/Solaris/smb.conf.default b/packaging/Solaris/smb.conf.default
index cdc958bc0e0..971ca19c830 100644
--- a/packaging/Solaris/smb.conf.default
+++ b/packaging/Solaris/smb.conf.default
@@ -3,6 +3,14 @@
 # here. Samba has a huge number of configurable options (perhaps too
 # many!) most of which are not shown in this example
 #
+# For a step to step guide on installing, configuring and using samba, 
+# read the Samba-HOWTO-Collection. This may be obtained from:
+#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
+#
+# Many working examples of smb.conf files can be found in the 
+# Samba-Guide which is generated daily and can be downloaded from: 
+#  http://www.samba.org/samba/docs/Samba-Guide.pdf
+#
 # Any line which starts with a ; (semi-colon) or a # (hash) 
 # is a comment and is ignored. In this example we will use a #
 # for commentry and a ; for parts of the config file that you
@@ -14,12 +22,17 @@
 #======================= Global Settings =====================================
 [global]
 
-# workgroup = NT-Domain-Name or Workgroup-Name
+# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
    workgroup = MYGROUP
 
 # server string is the equivalent of the NT Description field
    server string = Samba Server
 
+# Security mode. Defines in which mode Samba will operate. Possible 
+# values are share, user, server, domain and ads. Most people will want 
+# user level security. See the Samba-HOWTO-Collection for details.
+   security = user
+
 # This option is important for security. It allows you to restrict
 # connections to machines which are on your local network. The
 # following example restricts access to two C class networks and
@@ -27,15 +40,22 @@
 # the smb.conf man page
 ;   hosts allow = 192.168.1. 192.168.2. 127.
 
-# if you want to automatically load your printer list rather
+# If you want to automatically load your printer list rather
 # than setting them up individually then you'll need this
-   printcap name = /etc/printcap
    load printers = yes
 
-# It should not be necessary to spell out the print system type unless
-# yours is non-standard. Currently supported print systems include:
-# bsd, sysv, plp, lprng, aix, hpux, qnx
-;   printing = bsd
+# you may wish to override the location of the printcap file
+;   printcap name = /etc/printcap
+
+# on SystemV system setting printcap name to lpstat should allow
+# you to automatically obtain a printer list from the SystemV spool
+# system
+;   printcap name = lpstat
+
+# It should not be necessary to specify the print system type unless
+# it is non-standard. Currently supported print systems include:
+# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
+;   printing = cups
 
 # Uncomment this if you want a guest account, you must add this to /etc/passwd
 # otherwise the user "nobody" is used
@@ -43,64 +63,39 @@
 
 # this tells Samba to use a separate log file for each machine
 # that connects
-   # log file = /var/log/samba/log.%m
-# all log information in one file
-   log file = /var/log/samba/smbd.log
+   log file = /usr/local/samba/var/log.%m
 
 # Put a capping on the size of the log files (in Kb).
    max log size = 50
 
-# Security mode. Most people will want user level security. See
-# security_level.txt for details.
-   security = user
 # Use password server option only with security = server
+# The argument list may include:
+#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
+# or to auto-locate the domain controller/s
+#   password server = *
 ;   password server = <NT-Server-Name>
 
-# Password Level allows matching of _n_ characters of the password for
-# all combinations of upper and lower case.
-;  password level = 8
-;  username level = 8
-
-# You may wish to use password encryption. Please read
-# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
-# Do not enable this option unless you have read those documents
-;  encrypt passwords = yes
-;  smb passwd file = /etc/samba/smbpasswd
-
-# The following are needed to allow password changing from Windows to
-# update the Linux system password also.
-# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
-# NOTE2: You do NOT need these to allow workstations to change only
-#        the encrypted SMB passwords. They allow the Unix password
-#        to be kept in sync with the SMB password.
-;  unix password sync = Yes
-;  passwd program = /usr/bin/passwd %u
-;  passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*
-
-# Unix users can map to different SMB User names
-;  username map = /etc/samba/smbusers
+# Use the realm option only with security = ads
+# Specifies the Active Directory realm the host is part of
+;   realm = MY_REALM
+
+# Backend to store user information in. New installations should 
+# use either tdbsam or ldapsam. smbpasswd is available for backwards 
+# compatibility. tdbsam requires no further configuration.
+;   passdb backend = tdbsam
 
 # Using the following line enables you to customise your configuration
 # on a per machine basis. The %m gets replaced with the netbios name
-# of the machine that is connecting
-;   include = /etc/samba/smb.conf.%m
-
-# Most people will find that this option gives better performance.
-# See speed.txt and the manual pages for details
-   socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
+# of the machine that is connecting.
+# Note: Consider carefully the location in the configuration file of
+#       this line.  The included file is read at that point.
+;   include = /usr/local/samba/lib/smb.conf.%m
 
 # Configure Samba to use multiple interfaces
 # If you have multiple network interfaces then you must list them
 # here. See the man page for details.
 ;   interfaces = 192.168.12.2/24 192.168.13.2/24 
 
-# Configure remote browse list synchronisation here
-#  request announcement to, or browse list sync from:
-#	a specific host or from / to a whole subnet (see below)
-;   remote browse sync = 192.168.3.25 192.168.5.255
-# Cause this host to announce itself to local subnets here
-;   remote announce = 192.168.1.255 192.168.2.44
-
 # Browser Control Options:
 # set local master to no if you don't want Samba to become a master
 # browser on your network. Otherwise the normal election rules apply
@@ -135,19 +130,6 @@
 #        You must uncomment the [Profiles] share below
 ;   logon path = \\%L\Profiles\%U
 
-# All NetBIOS names must be resolved to IP Addresses
-# 'Name Resolve Order' allows the named resolution mechanism to be specified
-# the default order is "host lmhosts wins bcast". "host" means use the unix
-# system gethostbyname() function call that will use either /etc/hosts OR
-# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
-# and the /etc/resolv.conf file. "host" therefore is system configuration
-# dependant. This parameter is most often of use to prevent DNS lookups
-# in order to resolve NetBIOS names to IP Addresses. Use with care!
-# The example below excludes use of name resolution for machines that are NOT
-# on the local network segment
-# - OR - are not deliberately to be known via lmhosts or via WINS.
-; name resolve order = wins lmhosts bcast
-
 # Windows Internet Name Serving Support Section:
 # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
 ;   wins support = yes
@@ -162,18 +144,18 @@
 ;   wins proxy = yes
 
 # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
-# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
-# this has been changed in version 1.9.18 to no.
+# via DNS nslookups. The default is NO.
    dns proxy = no 
 
-# Case Preservation can be handy - system default is _no_
-# NOTE: These can be set on a per share basis
-;  preserve case = no
-;  short preserve case = no
-# Default case is normally upper case for all DOS files
-;  default case = lower
-# Be very careful with case sensitivity - it can break things!
-;  case sensitive = no
+# These scripts are used on a domain controller or stand-alone 
+# machine to add or delete corresponding unix accounts
+;  add user script = /usr/sbin/useradd %u
+;  add group script = /usr/sbin/groupadd %g
+;  add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
+;  delete user script = /usr/sbin/userdel %u
+;  delete user from group script = /usr/sbin/deluser %u %g
+;  delete group script = /usr/sbin/groupdel %g
+
 
 #============================ Share Definitions ==============================
 [homes]
@@ -184,7 +166,7 @@
 # Un-comment the following and create the netlogon directory for Domain Logons
 ; [netlogon]
 ;   comment = Network Logon Service
-;   path = /home/netlogon
+;   path = /usr/local/samba/lib/netlogon
 ;   guest ok = yes
 ;   writable = no
 ;   share modes = no
@@ -193,7 +175,7 @@
 # Un-comment the following to provide a specific roving profile share
 # the default is to use the user's home directory
 ;[Profiles]
-;    path = /home/profiles
+;    path = /usr/local/samba/profiles
 ;    browseable = no
 ;    guest ok = yes
 
@@ -202,7 +184,7 @@
 # specifically define each individual printer
 [printers]
    comment = All Printers
-   path = /var/spool/samba
+   path = /usr/spool/samba
    browseable = no
 # Set public = yes to allow user 'guest account' to print
    guest ok = no
@@ -222,7 +204,8 @@
 ;   comment = Public Stuff
 ;   path = /home/samba
 ;   public = yes
-;   read only = yes
+;   writable = yes
+;   printable = no
 ;   write list = @staff
 
 # Other examples. 
@@ -251,7 +234,7 @@
 
 # a service which has a different directory for each machine that connects
 # this allows you to tailor configurations to incoming machines. You could
-# also use the %u option to tailor it by user name.
+# also use the %U option to tailor it by user name.
 # The %m gets replaced with the machine name that is connecting.
 ;[pchome]
 ;  comment = PC Directories