path: root/ldap/admin/src/migrateTo4

#!perl
#
# BEGIN COPYRIGHT BLOCK
# This Program is free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free Software
# Foundation; version 2 of the License.
# 
# This Program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License along with
# this Program; if not, write to the Free Software Foundation, Inc., 59 Temple
# Place, Suite 330, Boston, MA 02111-1307 USA.
# 
# In addition, as a special exception, Red Hat, Inc. gives You the additional
# right to link the code of this Program with code not covered under the GNU
# General Public License ("Non-GPL Code") and to distribute linked combinations
# including the two, subject to the limitations in this paragraph. Non-GPL Code
# permitted under this exception must only link to the code of this Program
# through those well defined interfaces identified in the file named EXCEPTION
# found in the source code files (the "Approved Interfaces"). The files of
# Non-GPL Code may instantiate templates or use macros or inline functions from
# the Approved Interfaces without causing the resulting work to be covered by
# the GNU General Public License. Only Red Hat, Inc. may make changes or
# additions to the list of Approved Interfaces. You must obey the GNU General
# Public License in all respects for all of the Program code and other code used
# in conjunction with the Program except the Non-GPL Code covered by this
# exception. If you modify this file, you may extend this exception to your
# version of the file, but you are not obligated to do so. If you do not wish to
# do so, delete this exception statement from your version. 
# 
# 
# Copyright (C) 2001 Sun Microsystems, Inc. Used by permission.
# Copyright (C) 2005 Red Hat, Inc.
# All rights reserved.
# END COPYRIGHT BLOCK
#

BEGIN {
	require 'uname.lib';
	$isNT = -d '\\';
	@INC = ( '.', '../../../admin/admin/bin' );
	grep { s@/@\\@g } @INC if $isNT;
	$PATHSEP = $isNT ? '\\' : '/';
	# NT needs quotes around some things unix doesn't
	$quote = $isNT ? "\"" : "";

	# If this variable is set, all file/directory creation will make sure the mode
	# and ownership of the destination is the same as the source
	$PRESERVE = 1 if (!$isNT);
	$script_suffix = $isNT ? ".bat" : "";
	$exe_suffix = $isNT ? ".exe" : "";
    if ($isNT) {
		$os = "WINNT";
    } else {
    	$os = &uname("-s");
    }

	if ($isNT) {
		# we have to pass batch files directly to the NT command interpreter
		$com_spec = $ENV{ComSpec};
		if (!$com_spec) {
			$com_spec = $ENV{COMSPEC};
		}
		if (!$com_spec || ! -f $com_spec) {
			# find the first available command interpreter
			foreach $drive (c..z) {
				$com_spec = "$drive:\\winnt\\system32\\cmd.exe";
				last if (-f $com_spec);
				$com_spec = undef;
			}
			if (! $com_spec) {
				# punt and pray
				$com_spec = 'c:\winnt\system32\cmd.exe';
			}
		}
	}

	# dll suffix for shared libraries in old instance; note that the dll suffix
	# may have changed for the new instance e.g. AIX now uses .so
    if ( $os eq "AIX" ) {
		$dll_suffix = "_shr.a";
    }	
    elsif ( $os eq "HP-UX" ) {
	$arch = &uname("-p");
	if ( $arch eq "ia64" ) {
		$dll_suffix = ".so";
	} else {
		$dll_suffix = ".sl";
	}
    }	
    elsif ( $os eq "WINNT" ) {
		$dll_suffix = ".dll";
    }	
    else {
		$dll_suffix = ".so";
    }	
	$slapdExecName = $isNT ? 'slapd.exe' : 'ns-slapd';
	# if this flag is set, we will migrate the 3.0 and 3.1 databases
	# by doing a db2ldif -> ldif2db; if this is not set, we will just
	# copy the directories; right now, we cannot copy the directories,
	# because the database format has changed for 4.0, and the new
	# code does not recognize the old db format.  It is hoped that it
	# will by RTM . . .
	$convertToLDIF = 1;
	select STDERR;
	$| = 1;
	select STDOUT;
	$| = 1;

	# if the old value for dbcachesize is less than this, make it this
	$MIN_DBCACHESIZE = '500000';
}

sub getCwd {
	my $command = $isNT ? "cd" : "/bin/pwd";
	open(PWDCMD, "$command 2>&1 |") or
		die "Error: could not execute $command: $!";
	# without the following sleep, reading from the pipe will
	# return nothing; I guess it gives the pwd command time
	# to get some data to read . . .
	sleep(1);
	my $curdir;
	while (<PWDCMD>) {
		if (!$curdir) {
			chomp($curdir = $_);
		}
	}
	my $code = close(PWDCMD);
#	if ($code || $?) {
#		print "$command returned code=$code status=$? dir=$curdir\n";
#	}
#	print "getCwd curdir=\[$curdir\]\n";
	return $curdir;
}

sub fixBinaryAttr {
	my $foo = shift;
	$foo =~ s/;binary//ig;
	return $foo;
}

$type = "slapd";
$root = $ARGV[0];
$oldDir = $ARGV[1];
$newname = $ARGV[2];
$oldname = $ARGV[3];
$savedMDLdif = $ARGV[4];
$savedLdif = $ARGV[5];
$sieName = $ARGV[6];
$secPwd = $ARGV[7];

if (($root =~ m#/$#) || ($root =~ m#\\$#)) {
	chop $root;
}

if (($oldDir =~ m#/$#) || ($oldDir =~ m#\\$#)) {
	chop $oldDir;
}

sub basename {
	my @list = split(/[\\\/]/, $_[0]);
	return $list[@list - 1];
}

# this is used to strip html formatting from output to user
sub localprint {
	# arg 1 is string to print
	# arg 2 is beginning html directive
	# arg 3 is closing html directive
	my ($str, $begin, $end) = @_;
	print $str;
}

# this is used to run the system() call, capture exit and signal codes,
# and die() upon badness; the first argument is a directory to change
# dir to, if any, and the rest are passed to system()
sub mySystem {
	my $rc = &mySystemNoDie(@_);
	my ($dir, @args) = @_;
    if ($rc == 0) {
# success
    } elsif ($rc == 0xff00) {
		die "Error executing @args: error code $rc: $!";
    } elsif ($rc > 0x80) {
        $rc >>= 8;
		die "Error executing @args: error code $rc: $!";
    } else {
        if ($rc &   0x80) {
            $rc &= ~0x80;
        } 
		die "Error executing @args: received signal $rc: $!";
    }

	# usually won't get return value
	return $rc;
}

# This version does not die but just returns the error code
sub mySystemNoDie {
	my ($dir, @args) = @_;
	if ($dir && ($dir ne "")) {
		chdir($dir) or die "Could not change directory to $dir: $!";
	}
	my $cmd = $args[0];
	# the system {$cmd} avoids some NT shell quoting problems if the $cmd
	# needs to be quoted e.g. contains spaces; the map puts double quotes
	# around the arguments on NT which are stripped by the command
	# interpreter cmd.exe; but don't quote things which are already quoted
	my @fixargs = map { /^[\"].*[\"]$/ ? $_ : $quote . $_ . $quote } @args;
	my $rc = 0;
	if ($cmd =~ /[.](bat|cmd)$/) {
		# we have to pass batch files directly to the NT command interpreter
		$cmd = $com_spec;
#		print "system $cmd /c \"@fixargs\"\n";
		$rc = 0xffff & system {$cmd} '/c', "\"@fixargs\"";
	} else {
#		print "system $cmd @fixargs\n";
        $rc = 0xffff & system {$cmd} @fixargs;
    }
	return $rc;
}

$serverHome = "$root${PATHSEP}$type-$newname";

$oldHome = "$oldDir${PATHSEP}slapd-$oldname";

# these are the default values used by the 4.0 installer
$DEFAULT_CHANGELOG_DIR = $serverHome . $PATHSEP . 'logs' . $PATHSEP . 'changelogdb';
$DEFAULT_CHANGELOG_SUFFIX = "cn=changelog";

# get some information from the new slapd.conf file
open(INPUT, "$serverHome${PATHSEP}config${PATHSEP}slapd.conf") or
	die "Could not open file $serverHome${PATHSEP}config${PATHSEP}slapd.conf";
while (<INPUT>) {
	if (/^port\s+/i) { chomp($newport = $'); }
	elsif (/^localhost\s+/i) { chomp($newlocalhost = $'); }
	elsif (/^localuser\s+/i) { chomp($newuser = $'); }
}
close INPUT;

# get some information from the new slapd.ldbm.conf file
open(INPUT, "$serverHome${PATHSEP}config${PATHSEP}slapd.ldbm.conf") or
	die "Could not open file $serverHome${PATHSEP}config${PATHSEP}slapd.ldbm.conf";
while (<INPUT>) {
	if (/^directory\s+[\"]?(.*?)[\"]?\s*$/i) {
		# "
		$newDbDir = $1;
		# paths are stored in unix format in the config files . . .
		$newDbDir =~ s#/#\\#g if ($isNT);
	}
}
close INPUT;

# get some information from the old slapd.conf file
open(INPUT, "$oldHome${PATHSEP}config${PATHSEP}slapd.conf") or
	die "Could not open file $oldHome${PATHSEP}config${PATHSEP}slapd.conf";
while (<INPUT>) {
	if (/^changelogdir\s+[\"]?(.*?)[\"]?\s*$/i) {
		# "
		$oldChangeLogDir = $1;
		# paths are stored in unix format in the config files . . .
		$oldChangeLogDir =~ s#/#\\#g if ($isNT);
	}
	elsif (/^changelogsuffix\s+[\"]?(.*?)[\"]?\s*$/i) {
		# "
		$oldChangeLogSuffix = $1;
	}
	elsif (/^directory\s+[\"]?(.*?)[\"]?\s*$/i) {
		# "
		$oldDbDir = $1;
		# paths are stored in unix format in the config files . . .
		$oldDbDir =~ s#/#\\#g if ($isNT);
	}
	elsif (/^localuser\s+/i) { chomp($olduser = $'); }
	elsif (/^encryption-alias\s+/i) { chomp($encryption_alias = $'); }
	# the user may have given us a network mounted old home directory, but in the
	# old instance's config files, the root directory referred to is usually
	# a local directory.  For example, suppose there is an automounter map for
	# hosts which maps onto /h e.g. /h/oldhost would contain all directories
	# exported via NFS.  Similarly, for NT, you could do \\oldhost\c to look
	# at the C: drive on the old host.  Or the user may have network mounted
	# the old server root some other way.  Anyway, we need to determine what
	# the old server root was local to the original host because that is what
	# will be referred to it the old config files.  So, we look at the errorlog
	# directive in slapd.conf and use whatever comes before the slapd-oldname
	elsif (/^errorlog\s+[\"]?(.*)$type-$oldname/i) {
		# there may be leading "
		chop($realOldDir = $1);
	}
}
close INPUT;

if (! $realOldDir) {
	$realOldDir = $oldDir;
}

$realOldHome = $realOldDir . $PATHSEP . $type . '-' . $oldname;

# the oldDbDir is stored as a local dir, but we may need a network dir
($networkDbDir = $oldDbDir) =~ s/^$realOldDir/$oldDir/ig;

# list of standard plugins configured out of the box in version 3
# all of these paths are in unix format . . .
$oldLibDir = lc("$realOldDir/lib/");
$oldConfDir = lc("$realOldHome/config/");
$oldLogsDir = lc("$realOldHome/logs/");
$oldLibDir =~ s#\\#/#g if ($isNT);
$oldConfDir =~ s#\\#/#g if ($isNT);
$oldLogsDir =~ s#\\#/#g if ($isNT);

# note that all of these should be lower case, since NT does not distinguish case
# and we don't really care about case for plugin directives anyway . . .
%stdPlugins = (
	"plugin syntax \"${oldLibDir}syntax-plugin${dll_suffix}\" cis_init", "\n",
	"plugin syntax \"${oldLibDir}syntax-plugin${dll_suffix}\" ces_init", "\n",
	"plugin syntax \"${oldLibDir}syntax-plugin${dll_suffix}\" bin_init", "\n",
	"plugin syntax \"${oldLibDir}syntax-plugin${dll_suffix}\" tel_init", "\n",
	"plugin syntax \"${oldLibDir}syntax-plugin${dll_suffix}\" int_init", "\n",
	"plugin syntax \"${oldLibDir}syntax-plugin${dll_suffix}\" dn_init", "\n",
	"plugin matchingrule \"${oldLibDir}liblcoll${dll_suffix}\" orderingrule_init ${quote}${oldConfDir}slapd-collations.conf$quote", "\n",
	"plugin database \"${oldLibDir}libback-ldbm${dll_suffix}\" ldbm_back_init", "\n",
	"plugin postoperation ${quote}${oldLibDir}referint-plugin${dll_suffix}${quote} referint_postop_init 0 ${quote}${oldLogsDir}referint${quote} member uniquemember owner seealso", "\n",
	"plugin postoperation ${quote}${oldLibDir}referint-plugin${dll_suffix}${quote} referint_postop_init 0 ${quote}${oldLogsDir}referint${quote} 0 member uniquemember owner seealso", "\n",
	"plugin preoperation ${quote}${oldLibDir}libntsynch${dll_suffix}${quote} libntsynch_plugin_preop_init", "\n",
	"plugin postoperation ${quote}${oldLibDir}libntsynch${dll_suffix}${quote} libntsynch_plugin_postop_init", "\n"
);

# list of standard indexes configured out of the box in version 3
%stdIndex = (
	'index   aci pres', "\n",
	'index   cn pres,eq,sub', "\n",
	'index   sn pres,eq,sub', "\n",
	'index   givenName pres,eq,sub', "\n",
	'index   mail pres,eq,sub', "\n",
	'index   telephoneNumber pres,eq,sub', "\n",
	'index   ntUserDomainId pres,eq,sub', "\n",
	'index   uid eq', "\n",
	'index   changenumber eq', "\n",
	'index   uniquemember eq', "\n",
	'index   member eq', "\n",
	'index   owner  eq', "\n",
	'index   seeAlso eq', "\n"
);

# These are files included into slapd.conf, slapd.dynamic-ldbm.conf and
# slapd.ldbm.conf by default in earlier releases.  We use this hash to
# determine if there are user defined files which have been included
# into the slapd.conf e.g. for user defined attributes, object classes,
# indexes, etc.
%stdIncludes = (
	"${oldConfDir}slapd.at.conf", "\n",
	"${oldConfDir}slapd.oc.conf", "\n",
	"${oldConfDir}ns-schema.conf", "\n",
	"${oldConfDir}ns-globopt.conf", "\n",
);


# list of parameters that we don't care about; these are usually just parameters
# which hold paths relative to this instance and server root, which change anyway
%oldParametersToSkip = (
	'userat', "\n", # use the new one
	'useroc', "\n", # use the new one
	'instancedir', "\n", # must be the new one
	'dynamicconf', "\n", # use the new one
	'directory', "\n", # use the new one
	'access', "\n", # obsolete
	'defaultaccess', "\n", # obsolete
	'security-path', "\n", # obsolete
	'localuser', "\n", # use the newly configured suitespot user
	'port', "\n", # the new port must already be set either as determined from
				  # the old config or because we are migrating into the MC
				  # instance and cannot change the port number
	'rootdn', "\n", # the new rootdn must already be set either as determined from
				  # the old config or because we are migrating into the MC
				  # instance and cannot change it
	'rootpw', "\n", # the new rootpw must already be set either as determined from
				  # the old config or because we are migrating into the MC
				  # instance and cannot change it
);

# list of old ldbm specific parameters.  These parameters may be present in the
# old slapd.conf, but have been moved to the new slapd.ldbm.conf
%oldLdbmParameters = (
	'database', "\n",
	'lookthroughlimit', "\n",
	'mode', "\n",
	'cachesize', "\n",
	'dbcachesize', "\n",
	'allidsthreshold', "\n",
	'parentcheck', "\n",
);

# list of old slapd.conf parameters which have been moved to the new dse.ldif
%oldDSEParameters = (
	'encryption-alias', "\n",
	'sslclientauth', "\n"
);

($oldversion,$oldminor) = &getVersion($oldDir);
($newversion,$newminor) = &getVersion($root);

# if there was no old user specified
if (! $isNT && ! $olduser) {
	# get the olduid and oldgid from doing a stat of the db directory
	($olduid, $oldgid) = (stat($networkDbDir))[4..5];
}
# convert the user names to numeric uids
if ($PRESERVE) {
	if (! $olduid && $olduser) {
		($login,$pass,$olduid,$oldgid) = getpwnam($olduser);
	}
	($login,$pass,$newuid,$newgid) = getpwnam($newuser);
}

# copy the old config files
&copyDir("$oldHome${PATHSEP}config", "$serverHome${PATHSEP}migrate_config");

print "Migrating log files . . .\n";
# copy the log files
$srcdir = "$oldHome${PATHSEP}logs";
opendir(LOGDIR, $srcdir) or
	die "Error: could not open log file dir $srcdir : $!";
foreach (readdir(LOGDIR)) {
	if (! /[.][.]?/ && -f "$srcdir${PATHSEP}$_") {
		&copyBinFile("$srcdir${PATHSEP}$_",
					 "$serverHome${PATHSEP}logs${PATHSEP}${_}.migrate");
	}
}
closedir(LOGDIR);

# copy the ssl directory
&copyDir("$oldHome${PATHSEP}ssl", "$serverHome${PATHSEP}ssl");

# copy the cert db and key files
if ( -d "$oldDir${PATHSEP}alias" && $encryption_alias ) {
	$aliasDir = "$root${PATHSEP}alias";
	if (! -d $aliasDir) {
		mkdir($aliasDir, 0750);
	}
	$adminDir = $root . $PATHSEP . 'bin' . $PATHSEP . 'admin' . $PATHSEP .
		'admin' . $PATHSEP . 'bin';
	print "Migrating the key and certificate databases . . .\n";
	mySystem($adminDir, $adminDir . $PATHSEP . 'sec-migrate',
			 $oldDir, $encryption_alias, $root, $sieName, $secPwd);
	# copy the old password file
	if (-f "$oldDir${PATHSEP}alias${PATHSEP}$encryption_alias-password.txt") {
		&copyBinFile(
			 "$oldDir${PATHSEP}alias${PATHSEP}$encryption_alias-password.txt",
			 "$aliasDir${PATHSEP}$type-$newname-password.txt"
		);
		if ($newversion >= 4 && $newminor >= 1) {
			# need to convert the old format to new pin format
			print "Converting password file to new pin format . . .\n";
			$script = "$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}admin${PATHSEP}bin${PATHSEP}migratePwdFile";
			mySystem($aliasDir, $, $script, $root, "$type-$newname");
		}
	}

	# get the new key/cert db filenames
	opendir(CERTDIR, $aliasDir) or
		die "Error: could not open cert dir $aliasDir: $!";
	foreach (readdir(CERTDIR)) {
		if (/^$sieName/i) {
			if (/[-]cert/) {
				$newcertdb = $_;
			} elsif (/[-]key/) {
				$newkeydb = $_;
			}
		}
	}
	closedir(CERTDIR);
}

$needAclUpg = 0;
if ($oldversion == 1) {
	$needAclUpg = 1;
	$convertToLDIF = 1; # always need this for conversion from 1.X db
}

# Copy/Convert ldif files in ldif/
print "Migrating old LDIF files . . .\n";
&copyLdif;

if ($convertToLDIF) {
	# Converting database
	print "Migrating database to LDIF . . .\n";
	$oldLdif = "$oldHome${PATHSEP}ldif${PATHSEP}old.ldif";
	&db2ldif($networkDbDir, $oldLdif);
	if ($needAclUpg) {
		print "Converting ACLs in old data . . .\n";
		&mySystem("$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server",
				  "$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${PATHSEP}" .
				  "aclupg$exe_suffix", '-d', '-i',
				  $oldLdif, '-o',
				  "$oldHome${PATHSEP}ldif${PATHSEP}aclupg.ldif");
		unlink($oldLdif);
		rename("$oldHome${PATHSEP}ldif${PATHSEP}aclupg.ldif", $oldLdif);
	}
	chown $newuid, $newgid, $oldLdif if (!$isNT);
# copy the changelogdb directory
# how to handle a 1.0 change log?
# &copyDir($changelogdir, "$serverHome${PATHSEP}changelogdb") if ($changelogdir);
}

# Compare each configuration file against its default version.  If it has changed,
# notify the user that the file has changed and will need to be checked by the
# user.  This should be safe to do because there should be no path information
# stored in these conf files, which are just schema stuff.
print "Migrating configuration files . . .\n";
$origFilePath = "$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}install${PATHSEP}version${oldversion}";
$srcdir = "$serverHome${PATHSEP}migrate_config";
opendir(CONFDIR, $srcdir) or
	die "Error: could not open migrated config dir $srcdir: $!";
foreach $file (readdir(CONFDIR)) {
	$origFile = $origFilePath . $file;
	if (-f $origFile) {
		$diffs = &diff("$srcdir${PATHSEP}$file", $origFile);
		if ($diffs) {
			print "File $srcdir${PATHSEP}$file could not be migrated\n";
			print "because it is different than\n";
			print "the standard installed version.  You will need to check this\n";
			print "file and make sure its changes are compatible with the new\n";
			print "directory server.  Here are the differences:\n";
			print $diffs, "\n";
		} else {
#			print "No changes to old config file $srcdir${PATHSEP}$file\n";
		}
	}
}
closedir(CONFDIR);

# make a backup of the current user_at and user_oc files, and copy the old ones
# into the config directory

&copyBinFile("$serverHome${PATHSEP}config${PATHSEP}slapd.user_at.conf",
			 "$serverHome${PATHSEP}config${PATHSEP}slapd.user_at.conf.bak");
&copyBinFile("$serverHome${PATHSEP}config${PATHSEP}slapd.user_oc.conf",
			 "$serverHome${PATHSEP}config${PATHSEP}slapd.user_oc.conf.bak");

if (-f "$serverHome${PATHSEP}migrate_config${PATHSEP}slapd.user_at.conf") {
	&copyAndEditTextFile(
		"$serverHome${PATHSEP}migrate_config${PATHSEP}slapd.user_at.conf",
		"$serverHome${PATHSEP}config${PATHSEP}slapd.user_at.conf",
		\&fixBinaryAttr);
}

if (-f "$serverHome${PATHSEP}migrate_config${PATHSEP}slapd.user_oc.conf") {
	&copyAndEditTextFile(
		"$serverHome${PATHSEP}migrate_config${PATHSEP}slapd.user_oc.conf",
		"$serverHome${PATHSEP}config${PATHSEP}slapd.user_oc.conf",
		\&fixBinaryAttr);
}

# parse the parameters from the old configuration files and put them into
# the new configuration files
&fixConf("$serverHome${PATHSEP}migrate_config${PATHSEP}slapd.conf",
	"$serverHome${PATHSEP}migrate_config${PATHSEP}slapd.dynamic_ldbm.conf",
	"$serverHome${PATHSEP}migrate_config${PATHSEP}dse.ldif",
	"$serverHome${PATHSEP}config${PATHSEP}slapd.conf",
	"$serverHome${PATHSEP}config${PATHSEP}slapd.ldbm.conf",
	"$serverHome${PATHSEP}config${PATHSEP}dse.ldif");

# copy in old data and any data we wanted to save
if ($convertToLDIF) {
	print "Migrating old database to new database . . .\n";
	&manyLdif2db($savedMDLdif, $oldLdif, $savedLdif);
	unlink $savedMDLdif, $savedLdif;
}

if ($oldChangeLogDir && -e $oldChangeLogDir) {
	print "Migrating changelog database . . .\n";
	my $realDir = $oldChangeLogDir;
	$realDir =~ s/^$realOldDir/$oldDir/ig;
	if ($convertToLDIF) {
		$srcDir = $realDir;
		$destDir = $DEFAULT_CHANGELOG_DIR;
		$srcLDIF = "$oldHome${PATHSEP}ldif${PATHSEP}changelog.ldif";
		$destLDIF = "$serverHome${PATHSEP}ldif${PATHSEP}changelog.ldif";
		mkdir( $destDir , 0755 ) if !( -e $destDir);
		# Converting database
		if ( !$isNT && $newuser ) {
			chown($newuid, $newgid, $destDir);
		}
		&other_db2ldif($srcDir, $srcLDIF);
		if ($needAclUpg) {
			&mySystem("$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server",
					  "$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server" .
					  "${PATHSEP}aclupg$exe_suffix", '-d', '-i',
					  $srcLDIF, '-o', $destLDIF);
		} else {
			&copyBinFile($srcLDIF, $destLDIF);
		}
		&other_ldif2db($destLDIF, $destDir, 'slapd.ldbm.conf',
					   "suffix \"$oldChangeLogSuffix\"");
	} else {
		# the dir is stored as a local dir, but we may need a network dir here
		&copyDir($realDir, $DEFAULT_CHANGELOG_DIR, '\.share$');
	}
}

if ($convertToLDIF) {
	# Convert the db backup, bak/
	print "Migrating database backups . . .\n";
	&copyBak;
} else {
	# just copy the directories over
	&copyDir($networkDbDir, "$serverHome${PATHSEP}db", '\.share$');
	&copyDir("$oldHome${PATHSEP}bak", "$serverHome${PATHSEP}bak", '\.share$');
}

if (-f $oldLdif) {
	unlink($oldLdif);
}

exit(0);

############# END OF PROCESSING; SUBROUTINES FOLLOW

# This subroutine merges the old and new source files into the new destination file
sub fixConf {
    my	$oldsrc = shift;
    my	$oldldbmsrc = shift;
    my	$olddseldif = shift;
    my	$newsrc = shift;
    my	$newldbmsrc = shift;
    my	$newdseldif = shift;

	# read the old conf file into a hash table
    open( OLDSRC, $oldsrc ) ||
		die "Can't open $oldsrc: $!: ";
	LINE: while ( <OLDSRC> ) {
		if (/^\s*#/) { # skip comments
			next LINE;
		}
		if (/^\s*$/) { # skip blank lines
			next LINE;
		} elsif (/^plugin/i) {
			chomp($_);
			if (! &isAStandardPlugin($_)) {
				push @badPlugins, $_;
			}
		} elsif (/^index/i) {
			chomp($_);
			if (! &isAStandardIndex($_)) {
				push @newIndex, $_;
			}
		} elsif (/^include\s+[\"]?(.*?)[\"]?\s*$/i) {
			# strip leading and trailing "
			if (! &isAStandardInclude($1)) {
				push @newInclude, $1;
			}
		} elsif (/^dbcachesize\s+[\"]?(.*?)[\"]?\s*$/i) {
			# strip leading and trailing "
			$param = 'dbcachesize';
			$value = $1;
			if ($value < $MIN_DBCACHESIZE) {
				$value = $MIN_DBCACHESIZE;
			}

			if ($oldLdbmParameters{lc($param)}) {
				$oldldbmhash{lc($param)} = $value;
			} else {
				$oldhash{lc($param)} = $value;

			}
		} elsif (/^errorlog/i) {
			$oldhash{'errorlog-logging-enabled'} = "on";
		} elsif (/^accesslog/i) {
			$oldhash{'accesslog-logging-enabled'} = "on";
		} elsif (/^auditlog/i) {
			$oldhash{'auditlog-logging-enabled'} = "on";
		} elsif (/^replogfile/i) {
			# replogfile was only used in 1.X, and it had no suffix
			$oldhash{'changelogdir'} = $DEFAULT_CHANGELOG_DIR;
			$oldhash{'changelogsuffix'} = $DEFAULT_CHANGELOG_SUFFIX;
		} elsif (/^changelogdir/i) {
			# force use of default
			$oldhash{'changelogdir'} = $DEFAULT_CHANGELOG_DIR;
		} elsif (/^\s*(\S+)\s+[\"]?(.*?)[\"]?\s*$/i) {
			# strip leading and trailing "
			$param = $1;
			$value = $2;
			if ($oldParametersToSkip{lc($param)}) {
				next LINE;
			} elsif (lc($param) eq 'suffix') {
				if (lc($value) cmp 'cn=schema') {
					$oldsuffix{lc($value)} = $value;
				}
			} else {
				if ($oldLdbmParameters{lc($param)}) {
					$oldldbmhash{lc($param)} = $value;
				} elsif ($oldDSEParameters{lc($param)}) {
					if (lc($param) eq 'encryption-alias') {
						if ($newcertdb) {
							$olddsehash{'nscertfile'} = "alias/$newcertdb";
						} else {
							$olddsehash{'nscertfile'} = "alias/$type-$newname-cert.db";
						}
						if ($newkeydb) {
							$olddsehash{'nskeyfile'} = "alias/$newkeydb";
						} else {
							$olddsehash{'nskeyfile'} = "alias/$type-$newname-key.db";
						}
					} elsif (lc($param) eq 'sslclientauth') {
						$olddsehash{'nssslclientauth'} = $value;
					} else {
						$olddsehash{lc($param)} = $value;
					}
				} elsif (($param eq 'passwdhash') &&
						 ((! $value) || ($value eq ""))) {
					# 3.X used "" as an alias for "clear"
					$oldhash{lc($param)} = 'clear';
				} else {
					$oldhash{lc($param)} = $value;
				}
			}
		}
	}
	close(OLDSRC);

	$oldhash{'errorlog-logging-enabled'} = "off"
		if (! $oldhash{'errorlog-logging-enabled'});
	$oldhash{'accesslog-logging-enabled'} = "off"
		if (! $oldhash{'accesslog-logging-enabled'});
	$oldhash{'auditlog-logging-enabled'} = "off"
		if (! $oldhash{'auditlog-logging-enabled'});

 	# read the old ldbm conf file into a hash table; note that there may not be
	# one, so don't complain
	open( OLDSRC, $oldldbmsrc );
    LINE2: while ( <OLDSRC> ) {
		if (/^\s*#/) { # skip comments
			next LINE2;
		}
		if (/^\s*$/) { # skip blank lines
			next LINE2;
		}
		if (/^index/i) {
			chomp($_);
			if (! &isAStandardIndex($_)) {
				push @newIndex, $_;
			}
			next LINE2;
		}
		if (/^plugin/i) {
			chomp($_);
			if (! &isAStandardPlugin($_)) {
				push @badLdbmPlugins, $_;
			}
			next LINE2;
		}
		if (/^include\s+/i) {
			chomp($inc = $');
			$inc =~ s/\"//g;
			# strip " characters
			if (! &isAStandardInclude($inc)) {
				push @newLdbmInclude, $inc;
			}
			next LINE2;
		}
		if (/^dbcachesize\s+[\"]?(.*?)[\"]?\s*$/i) {
			# strip leading and trailing "
			$param = 'dbcachesize';
			$value = $1;
			if ($value < $MIN_DBCACHESIZE) {
				$value = $MIN_DBCACHESIZE;
			}

			$oldldbmhash{lc($param)} = $value;
			next LINE2;
		}

		if (/^\s*(\S+)\s+[\"]?(.*?)[\"]?\s*$/) {
			# strip leading and trailing "
			$param = $1;
			$value = $2;
			if ($oldParametersToSkip{lc($param)}) {
				next LINE2;
			} elsif (lc($param) eq 'suffix') {
				if (lc($value) cmp 'cn=schema') {
					$oldsuffix{lc($value)} = $value;
				}
			} else {
				$oldldbmhash{lc($param)} = $value;
			}
		}
	}
	close(OLDSRC);
	
 	# read the old dse.ldif file into a hash table; note that there may not be
	# one, so don't complain
	open(OLDSRC, $olddseldif);
	while ( <OLDSRC> ) {
		chomp($_);
		if ( /^passwordchange:\s*/i ) {
			if ($' eq "must") {
				$oldhash{'pw_change'} = "on";
				$oldhash{'pw_must_change'} = "on";
			} elsif ($' eq "may") {
				$oldhash{'pw_change'} = "on";
				$oldhash{'pw_must_change'} = "off";
			} else {
				$oldhash{'pw_change'} = "off";
				$oldhash{'pw_must_change'} = "off";
			}
		} elsif ( /^passwordchecksyntax:\s*/i ) {
			if ($' > 0) {
				$oldhash{'pw_syntax'} = "on";
			} else {
				$oldhash{'pw_syntax'} = "off";
			}
		} elsif ( /^passwordminlength:\s*/i ) {
			$oldhash{'pw_minlength'} = $';
		} elsif ( /^passwordexp:\s*/i ) {
			if ($' > 0) {
				$oldhash{'pw_exp'} = "on";
			} else {
				$oldhash{'pw_exp'} = "off";
			}
		} elsif ( /^passwordmaxage:\s*/i ) {
			$oldhash{'pw_maxage'} = $';
		} elsif ( /^passwordwarning:\s*/i ) {
			$oldhash{'pw_warning'} = $';
		} elsif ( /^passwordkeephistory:\s*/i ) {
			if ($' > 0) {
				$oldhash{'pw_history'} = "on";
			} else {
				$oldhash{'pw_history'} = "off";
			}
		} elsif ( /^passwordinhistory:\s*/i ) {
			$oldhash{'pw_inhistory'} = $';
		} elsif ( /^passwordlockoutduration:\s*/i ) {
			$oldhash{'pw_lockduration'} = $';
		} elsif ( /^passwordlockout:\s*/i ) {
			if ($' > 0) {
				$oldhash{'pw_lockout'} = "on";
			} else {
				$oldhash{'pw_lockout'} = "off";
			}
		} elsif ( /^passwordmaxfailure:\s*/i ) {
			$oldhash{'pw_maxfailure'} = $';
		} elsif ( /^passwordunlock:\s*/i ) {
			if ($' > 0) {
				$oldhash{'pw_unlock'} = "on";
			} else {
				$oldhash{'pw_unlock'} = "off";
			}
		} elsif ( /^passwordresetduration:\s*/i ) {
			$oldhash{'pw_resetfailurecount'} = $';
		}
	}
	close(OLDSRC);

    open(NEWSRC, $newsrc ) || die "Can't open $newsrc: $!: ";
    open(NEWDEST, ">$newsrc.tmp" ) || die "Can't create $newsrc.tmp: $!: ";
    while ( <NEWSRC> ) {
		# make sure the dynamicconf parameter is the last one in the file
		if (/^dynamicconf/i) {
			# print the parameters which exist in the old file but do not
			# exist in the new file; these are the parameters we have not
			# deleted from oldhash
			print NEWDEST "#These additional parameters have been migrated\n";
			foreach $param (sort keys %oldhash) {
				if (lc($param) eq 'passwdhash') {
					$pwhash = $oldhash{lc($param)};
					# if the old value was not set, don't set the new value either
					# just have the server use the default value
					if ($pwhash && $pwhash ne "" && $pwhash ne '""') {
						print NEWDEST 'pw_storagescheme', "\t", $pwhash, "\n";
					}
				} elsif (lc($param) eq 'ntsynchusessl') {
					print NEWDEST 'NTSynchUseSSL', "\t", $oldhash{lc($param)}, "\n";
				} else {
					print NEWDEST $param, "\t", "\"$oldhash{lc($param)}\"",
						"\n";
				}
			}
			print NEWDEST "#End of additional migrated parameters\n\n";
			# use the temp one for now until we have the real one in place, then
			# we will change this back
			print NEWDEST "dynamicconf\t\"$newldbmsrc.tmp\"\n";
		} elsif (/^\s*#/) {
			print NEWDEST $_;
		} elsif (/^include/ && @newInclude) {
			my $newConfDir = $serverHome . '/' . 'config' . '/';
			$newConfDir =~ s#\\#/#g if ($isNT);
			print NEWDEST "# These non standard includes were migrated:\n";
			print "These non standard includes were migrated:\n";
			while (@newInclude) {
				my $oldPath = shift @newInclude;
				# oldPath is a local path; we need a network path here because
				# we will be copying the file
				$oldPath =~ s/^$realOldDir/$oldDir/ig;
				my $base = &basename($oldPath);
				my $newone = $newConfDir . $base;
				# convert to new path
				print NEWDEST "include	", $quote, $newone, $quote, "\n";
				print $newone, "\n";
				# now, change path separators back to the correct ones for
				# the os
				$oldPath =~ s#/#\\#g if ($isNT);
				$newone =~ s#/#\\#g if ($isNT);
				&copyAndEditTextFile($oldPath, $newone, \&fixBinaryAttr);
			}
			print NEWDEST "# end of migrated includes\n";
			print "Be sure to check the new slapd.conf file to make sure the order\n";
			print "is correct and there are no conflicts with new config files,\n";
			print "object classes, attributes, etc.\n";
			print NEWDEST $_;
		} elsif (/^\s*(\S+)\s+[\"]?(.*?)[\"]?\s*$/) {
			$param = $1;
			$value = $2;
			# see if the parameter is set in the old config file
			if ($oldhash{lc($param)}) {
				# only set the parameter if the old value is different than
				# the new value
				if ($value cmp $oldhash{lc($param)}) {
					print NEWDEST "#This parameter was migrated: the original value was $value\n";
					print NEWDEST $param, "\t", "\"$oldhash{lc($param)}\"", "\n";
				} else {
					print NEWDEST $_;
				}
				delete $oldhash{lc($param)};
			} else {
				# just print the parameter
				print NEWDEST $_;
			}
		} else {
			print NEWDEST $_;
		}
	}
	close (NEWSRC);

	# print the bad plugins, commented out, at the end of the file
	if (@badPlugins) {
		print NEWDEST "#The following non standard plugins were detected:\n";
		print "The following non standard plugins were detected:\n";
		foreach (@badPlugins) {
			print NEWDEST "#", $_, "\n";
			print $_, "\n";
		}
		print NEWDEST "#These plugins will probably need to be recompiled for this release\n";
		print "These plugins will probably need to be recompiled for this release\n";
		print NEWDEST "#of directory server, or at the very least, reconfigured.\n";
		print "of directory server, or at the very least, reconfigured.\n";
	}

    close( NEWDEST );

    open(NEWSRC, $newldbmsrc ) || die "Can't open $newldbmsrc: $!: ";
    open(NEWDEST, ">$newldbmsrc.tmp" ) || die "Can't create $newldbmsrc.tmp: $!: ";
    while ( <NEWSRC> ) {
		if (/^\s*#/) {
			print NEWDEST $_;
		} elsif (/^include/ && @newLdbmInclude) {
			my $newConfDir = $serverHome . '/' . 'config' . '/';
			$newConfDir =~ s#\\#/#g if ($isNT);
			print NEWDEST "# These non standard ldbm includes were migrated:\n";
			print "These non standard includes were migrated:\n";
			while (@newLdbmInclude) {
				my $oldPath = shift @newInclude;
				# oldPath is a local path; we need a network path here because
				# we will be copying the file
				$oldPath =~ s/^$realOldDir/$oldDir/ig;
				my $base = &basename($oldPath);
				my $newone = $newConfDir . $base;
				# convert to new path
				print NEWDEST "include	", $quote, $newone, $quote, "\n";
				print $newone, "\n";
				# now, change path separators back to the correct ones for
				# the os
				$oldPath =~ s#/#\\#g if ($isNT);
				$newone =~ s#/#\\#g if ($isNT);
				&copyBinFile($oldPath, $newone);
			}
			print NEWDEST "# end of migrated includes\n";
			print "Be sure to check the new slapd.ldbm.conf file to make sure the order\n";
			print "is correct and there are no conflicts with new config files,\n";
			print "object classes, attributes, etc.\n";
			print NEWDEST $_;
		} elsif (/^\s*(\S+)\s+[\"]?(.*?)[\"]?\s*$/) {
			# strip " characters
			$param = $1;
			$value = $2;
			if (lc($param) eq 'suffix') {
				if ($oldsuffix{lc($value)}) {
					delete $oldsuffix{lc($value)};
				}
				print NEWDEST $_;
			} elsif ($oldhash{lc($param)}) {
				# only set the parameter if the old value is different than
				# the new value
				if ($value cmp $oldhash{lc($param)}) {
					print NEWDEST "#This parameter was migrated: the original value was $value\n";
					print NEWDEST $param, "\t", "\"$oldhash{lc($param)}\"", "\n";
				} else {
					print NEWDEST $_;
				}
				delete $oldhash{lc($param)};
			} elsif ($oldldbmhash{lc($param)}) {
				# only set the parameter if the old value is different than
				# the new value
				if ($value cmp $oldldbmhash{lc($param)}) {
					print NEWDEST "#This parameter was migrated: the original value was $value\n";
					print NEWDEST $param, "\t", "\"$oldldbmhash{lc($param)}\"", "\n";
				} else {
					print NEWDEST $_;
				}
				delete $oldldbmhash{lc($param)};
			} else {
				# just print the parameter
				print NEWDEST $_;
			}
		} else {
			print NEWDEST $_;
		}
	}
	close (NEWSRC);

	# add the suffixes we didn't already have
	if (%oldsuffix) {
		print NEWDEST "#These suffixes were migrated\n";
		foreach (values %oldsuffix) {
			print NEWDEST 'suffix', "\t", "\"$_\"", "\n";
		}
	}

	# add the user defined indexes
	if (@newIndex) {
		print NEWDEST "#These indexes were migrated\n";
		while (@newIndex) {
			print NEWDEST shift(@newIndex), "\n";
		}
	}

	# print the bad plugins, commented out, at the end of the file
	if (@badLdbmPlugins) {
		print NEWDEST "#The following non standard plugins were detected:\n";
		print "The following non standard ldbm plugins were detected:\n";
		foreach (@badLdbmPlugins) {
			print NEWDEST "#", $_, "\n";
			print $_, "\n";
		}
		print NEWDEST "#These plugins will probably need to be recompiled for this release\n";
		print "These plugins will probably need to be recompiled for this release\n";
		print NEWDEST "#of directory server, or at the very least, reconfigured.\n";
		print "of directory server, or at the very least, reconfigured.\n";
	}

	close( NEWDEST );

	open(NEWSRC, $newdseldif ) || die "Can't open $newdseldif: $!: ";
    open(NEWDEST, ">$newdseldif.tmp" ) || die "Can't create $newdseldif.tmp: $!: ";
	$inEncryptionConfig = 0;
    while ( <NEWSRC> ) {
		if (/^\s*#/) {
			print NEWDEST $_;
		} elsif (/^\s*$/) {
			if ($inEncryptionConfig) { # end of entry
				$inEncryptionConfig = 0;
				# if attributes were present in the old config but not
				# in the new one, add them to the end of the entry
				foreach $key (keys %olddsehash) {
					print NEWDEST $key, ': ', $olddsehash{$key}, "\n";
				}
			}
			print NEWDEST $_;
		} elsif (/cn=encryption\s*,\s*cn=config/) {
			$inEncryptionConfig = 1;
			print NEWDEST $_;
		} elsif (/^\s*(\S+):\s*(.*)$/) {
			$param = $1;
			$value = $2;
			if ($olddsehash{lc($param)}) {
				# only set the parameter if the old value is different than
				# the new value
				if ($value cmp $olddsehash{lc($param)}) {
					print NEWDEST $param, "\t", $olddsehash{lc($param)}, "\n";
				} else {
					print NEWDEST $_;
				}
				delete $olddsehash{lc($param)};
			} else {
				# just print the parameter
				print NEWDEST $_;
			}
		} else {
			print NEWDEST $_;
		}
	}
	close (NEWSRC);
    close( NEWDEST );

	# final step: use the slapd_config program to check the new config file
	my $rc = &mySystemNoDie("$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server",
							"$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server" .
							"${PATHSEP}slapd_config${exe_suffix}",
							'-c', '-f', "$newsrc.tmp");

	# if the check failed, run slapd_config again in verbose mode to provide
	# more information to the user; this will die and abort processing
	if ($rc) {
		print "The following problems were found with the new configuration:\n";
		&mySystem("$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server",
				  "$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server" .
				  "${PATHSEP}slapd_config${exe_suffix}",
				  '-f', "$newsrc.tmp");
	}

	# if we got here, the files were good
	# save a copy of the old config files
	&copyBinFile("$newsrc", "$newsrc.save");
	&copyBinFile("$newldbmsrc", "$newldbmsrc.save");

	# replace the temporary dynamicconf directive with the real one
	open(NEWSRC, "$newsrc.tmp") or die "Could not open file $newsrc.tmp: $!";
	open(NEWDEST, ">$newsrc") or die "Could not write file $newsrc: $!";
	while(<NEWSRC>) {
		if (/^dynamicconf/i) {
			print NEWDEST "dynamicconf\t\"$newldbmsrc\"\n";
		} else {
			print NEWDEST;
		}
	}
	close NEWSRC;
	close NEWDEST;
	
	&copyBinFile("$newldbmsrc.tmp", "$newldbmsrc");
	&copyBinFile("$newdseldif.tmp", "$newdseldif");
}

sub copyDir {
    my	$src = shift;
    my	$dest = shift;
	my  $exclude = shift;

    opendir( SRC, $src ) or die "Can't open directory $src: $!: ";
	my $mode;
	my $uid;
	my $gid;
    mkdir ( $dest , 0755 ) if !( -e $dest );
	if ($PRESERVE) {
		$mode = (stat($src))[2];
		($uid, $gid) = (stat(_))[4..5];
		# Make sure files owned by the old user are owned by the
		# new user
		if ($uid == $olduid) {
			$uid = $newuid;
			$gid = $newgid;
		}
		chown $uid, $gid, $dest;
		chmod $mode, $dest;
	}
    local ( @files ) = readdir ( SRC );
    closedir( SRC );
    for ( @files ) {
		if ( $_ eq "." || $_ eq ".." ) {
			next;
		} elsif ( $exclude && /$exclude/ ) {
			next;
		} elsif( -d "$src${PATHSEP}$_")  {
			&copyDir ( "$src${PATHSEP}$_", "$dest${PATHSEP}$_" ); 
		} else {
			&copyBinFile ( "$src${PATHSEP}$_", "$dest${PATHSEP}$_");
		}
    }
}

sub copyBinFile {
    my	$src = shift;
    my	$dest = shift;
    my  $buf = "";
	my  $bufsize = 8192;

    open( SRC, $src ) || die "Can't open $src: $!\n";
	# if we are given a directory destination instead of a file, extract the
	# filename portion of the source to use as the destination filename
	if (-d $dest) {
		$dest = $dest . $PATHSEP . &basename($src);
	}
    open( DEST, ">$dest" ) || die "Can't create $dest: $!\n";
    binmode SRC;
    binmode DEST;
	if ($PRESERVE) {
		$mode = (stat($src))[2];
		($uid, $gid) = (stat(_))[4..5];
		# Make sure files owned by the old user are owned by the
		# new user
		if ($uid == $olduid) {
			$uid = $newuid;
			$gid = $newgid;
		}
		chown $uid, $gid, $dest;
		chmod $mode, $dest;
	}
    while (read(SRC, $buf, $bufsize)) {
		print DEST $buf;
    }
    close( SRC );
    close( DEST );
}

sub isAStandardPlugin {
	my $line = shift;

	chomp($line);
	return $stdPlugins{lc($line)};
}

sub isAStandardIndex {
	my $line = shift;

	chomp($line);
	return $stdIndex{$line};
}

sub isAStandardInclude {
	my $line = shift;

	chomp($line);
	return $stdIncludes{lc($line)};
}

# Do a file copy, but convert path names as the file gets copied
# Don't convert paths that don't point anywere, except for log files
# push non-converted paths to the results list
# If you are xlating paths that contain one another, the long paths must come
# first
sub xlatePath {
    my	$src = shift;
    my  $dest = shift;

    open( SRC, $src ) || die "Can't open $src: $!: ";
    open( DEST, ">$dest" ) || die "Can't create $dest: $!: ";
	if ($PRESERVE) {
		$mode = (stat($src))[2];
		($uid, $gid) = (stat(_))[4..5];
		# Make sure files owned by the old user are owned by the
		# new user
		if ($uid == $olduid) {
			$uid = $newuid;
			$gid = $newgid;
		}
		chown $uid, $gid, $dest;
		chmod $mode, $dest;
	}
    while ( <SRC> ) {
		print DEST &xlatePaths( $_, @_ );
    }
    close( SRC );
    close( DEST );
}

# translate paths in the string
sub xlatePaths {
    my	$line = shift;
    my	@otherParams = @_;
    my	$numXs = shift;
    my	@srcPaths = splice( @_, 0, $numXs );
    my	@destPaths = splice( @_, 0, $numXs );
    my	@allowedEmpty = @_;
    my	@pathLengths = map { length( $_ ) } @srcPaths;
    my	$i;
    my	$pre;
    my	$post;
    my	$allowed;
    my	$path;
    my	$destPath;

	# replace the src paths with the dest paths
	# NOTE: this algorithm will only work if the longest paths
	# are replaced first e.g. strlen(srcPath[N]) > strlen(srcPath[N+1])
	# and none of the destpaths match any of the srcpaths
    for ( $i = 0 ; $i < $numXs ; ++$i ) {
		if ($srcPaths[$i] ne $destPaths[$i]) {
			$line =~ s/$srcPaths[$i]/$destPaths[$i]/g;
		}
	}

    return $line;
}

sub copyBak {
    opendir( OLDBAK, "$oldHome${PATHSEP}bak" ) || 
		die "Can't open directory $oldHome${PATHSEP}bak: $!: ";
    local ( @dirs ) = readdir( OLDBAK );
    closedir ( OLDBAK );
    for ( @dirs ) {
		if ( $_ eq "." || $_ eq ".." ) {
            next;
        } elsif ( -d "$oldHome${PATHSEP}bak${PATHSEP}$_" ) {
			$srcDir = "$oldHome${PATHSEP}bak${PATHSEP}$_";
			$destDir = "$serverHome${PATHSEP}bak${PATHSEP}$_";
			$srcLDIF = "$oldHome${PATHSEP}ldif${PATHSEP}bak.ldif";
			$destLDIF = "$serverHome${PATHSEP}ldif${PATHSEP}bak.ldif";
			mkdir( $destDir , 0755 ) if !( -e $destDir);
			# Converting database
			if ( !$isNT && $newuser ) {
				chown($newuid, $newgid, 
					  "$serverHome${PATHSEP}bak", $destDir);
			}
			&other_db2ldif($srcDir, $srcLDIF);
			if ($needAclUpg) {
				&mySystem("$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server",
						  "$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server" .
						  "${PATHSEP}aclupg$exe_suffix", '-d', '-i',
						  $srcLDIF, '-o', $destLDIF);
			} else {
				&copyBinFile($srcLDIF, $destLDIF);
			}
			&other_ldif2db($destLDIF, $destDir);
		}
	}
}

sub other_db2ldif {
	my  $srcDbDir = shift;
	my  $ldif = shift;

	if ($oldversion == 1) {
		&db2ldif($srcDbDir, $ldif);
	} else {
		# make a dummy version of the current slapd.conf and tell it that
		# the db directory is really the back up directory so that we can
		# trick ns-slapd db2ldif to do the right thing; Oh how I wish there
		# were a simple ldbmcat utility for 3.X and 4.0 . . .
		&xlatePath("$oldHome${PATHSEP}config${PATHSEP}slapd.conf",
				   "$oldHome${PATHSEP}config${PATHSEP}slapd.conf.bak",
				   3,
				   "$realOldHome",
				   "$oldDbDir",
				   "slapd.dynamic_ldbm.conf",
				   "$oldHome",
				   "$srcDbDir",
				   "slapd.dynamic_ldbm.conf.bak",
				   '/logs/');
		&xlatePath("$oldHome${PATHSEP}config${PATHSEP}slapd.dynamic_ldbm.conf",
				   "$oldHome${PATHSEP}config${PATHSEP}slapd.dynamic_ldbm.conf.bak",
				   2,
				   "$realOldHome",
				   "$oldDbDir",
				   "$oldHome",
				   "$srcDbDir",
				   '/logs/');
		# now do the ldif2db with our munged conf files . . .
		&db2ldif($srcDbDir, $ldif,
				 "$oldHome${PATHSEP}config${PATHSEP}slapd.conf.bak");
		unlink("$oldHome${PATHSEP}config${PATHSEP}slapd.conf.bak");
		unlink("$oldHome${PATHSEP}config${PATHSEP}slapd.dynamic_ldbm.conf.bak");
	}
}

sub other_ldif2db {
	my  $ldif = shift;
	my  $destDbDir = shift;
	my  $confFile = shift;
	my  $directiveToAdd = shift;

	# make a dummy version of the current slapd.conf and slapd.ldbm.conf
	# to point to the database directory we want to populate instead of
	# the standard
    &xlatePath("$serverHome${PATHSEP}config${PATHSEP}slapd.conf",
		"$serverHome${PATHSEP}config${PATHSEP}slapd.conf.bak",
		3,
		"$newDbDir",
		"slapd.ldbm.conf",
		"slapd.dynamic_ldbm.conf",
		"$destDbDir",
		"slapd.ldbm.conf.bak",
		"slapd.ldbm.conf.bak",
		'/logs/');
    &xlatePath("$serverHome${PATHSEP}config${PATHSEP}slapd.ldbm.conf",
		"$serverHome${PATHSEP}config${PATHSEP}slapd.ldbm.conf.bak",
		1,
		"$newDbDir",
		"$destDbDir",
		'/logs/');

	# we may need to add something to a config file e.g. when migrating the change
	# log, we need to add suffix $changeLogSuffix to slapd.ldbm.conf in order to
	# ldif2db it without error
	if ($confFile && $directiveToAdd) {
		open(CONFADD, ">>$serverHome${PATHSEP}config${PATHSEP}${confFile}.bak") or
			die "Could not append to $serverHome${PATHSEP}config${PATHSEP}${confFile}.bak: $!";
		print CONFADD $directiveToAdd, "\n";
		close(CONFADD);
	}

    &mySystem("$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server",
			  "$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server" .
			  "${PATHSEP}$slapdExecName",
			  "ldif2db", '-C', '-f',
			  "$serverHome${PATHSEP}config${PATHSEP}slapd.conf.bak", '-i',
			  "$ldif");
	unlink("$serverHome${PATHSEP}config${PATHSEP}slapd.conf.bak");
	unlink("$serverHome${PATHSEP}config${PATHSEP}slapd.ldbm.conf.bak");
	unlink($ldif);
}

sub manyLdif2db {
	my @args = ();
	while (@_) {
		push @args, '-i', shift(@_);
	}
    &mySystem("$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server",
			  "$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server" .
			  "${PATHSEP}$slapdExecName", "ldif2db", '-C', '-f',
			  "$serverHome${PATHSEP}config${PATHSEP}slapd.conf", @args);
}

sub copyLdif {
    opendir (LDIFDIR, "$oldHome${PATHSEP}ldif" );
    local ( @files ) = readdir ( LDIFDIR );
	closedir(LDIFDIR);
    for ( @files ) {
		if ( $_ eq "." || $_ eq ".." || $_ eq "demo.ldif" ) {
            next;
        }

		if ($needAclUpg) {
			&mySystem("$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server",
					  "$root${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${PATHSEP}" .
					  "aclupg$exe_suffix", '-d', '-i',
					  "$oldHome${PATHSEP}ldif${PATHSEP}$_", '-o',
					  "$serverHome${PATHSEP}ldif${PATHSEP}$_");
		} else {
			&copyBinFile("$oldHome${PATHSEP}ldif${PATHSEP}$_",
						 "$serverHome${PATHSEP}ldif${PATHSEP}$_");
		}
    }
}

sub genAcl {
    my $filename = "$root${PATHSEP}httpacl${PATHSEP}generated.$type-$newname.acl";

    open( S, ">$filename" ) || die "Can't create file $filename: $!: ";
    print S "version $newversion.0;\n";
    print S "acl agents;\n";
    print S "authenticate (user, group) {\n";
    print S "    prompt = \"Agent Service\";\n";
    print S "};\n";
    print S "deny absolute (all) (user != all);\n";
    print S "allow absolute (all) (user = all);\n";
    print S "\n";
    print S "acl \"default\";\n";
    print S "allow (read, list, execute,info) user = \"anyone\";\n";
    print S "allow (write, delete) user = \"all\";\n";
    close( S );
}

sub getVersion {
	my $rootDir = shift;
	my $version = 0;
	my $minor = 0;
	my $progDir = "${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server${PATHSEP}";
	my $progDir2 = "${PATHSEP}bin${PATHSEP}slapd${PATHSEP}";
	# get the current directory so we can go back to it
	my $curdir = &getCwd;

	# find the slapd executable
	$prog = $rootDir . $progDir . $slapdExecName;
	if (! -f $prog) {
		$prog = $rootDir . $progDir2 . $slapdExecName;
		if (-f $prog && $isNT) {
			# if slapd is in bin/slapd and we're on NT, just assume version 1;
			# apparently, slapd.exe doesn't like the -v argument . . .
			return ( '1', $minor );
		}
	}

	# read the old version from the old slapd program
	chdir($rootDir . $progDir) or
		die "Could not chdir to $rootDir${progDir}: $!: ";
	open(F, "${quote}${quote}$prog${quote} -v${quote} 2>&1 |") or
		die "Could not run slapd program $prog: $!";
	sleep(1); # allow some data to accumulate in the pipe
#	print "Output from $prog -v:\n";
	while (<F>) {
#		print;
		if (/^Netscape-Directory\/(\d+)\.(\d+)/) {
			$version = $1;
			$minor = $2;
			last;
		}
	}
	$code = close(F);
#	print "$prog returned code=$code status=$?\n";

	# done determining versions; go back to orig directory
	chdir($curdir) or die "Could not chdir to $curdir: $!: ";

	$version == 0 and
		die "Could not determine version of the directory server in $rootDir: ";

	return ( $version, $minor );
}

# this subroutine implements a very stupid version of diff
sub diff {
	my $f1 = shift;
	my $f2 = shift;
	my $retval = "";

	open(F1, "$f1") or die "Could not open file $f1";
	open(F2, "$f2") or close(F1), die "Could not open file $f2";

	while (defined($l1 = <F1>) && defined($l2 = <F2>)) {
		if (!($l1 eq $l2)) {
			# ignore comments
			if (($l1 =~ /^#/) && ($l2 =~ /^#/)) {
				 next;
			}
			# ignore whitespace
			$l1 =~ s/\s//g;
			$l2 =~ s/\s//g;
						  
			if (!($l1 eq $l2)) {
				$retval .= "< ${l1}> $l2";
			}
		}
	}

	close(F1);
	close(F2);

	if ($retval eq "") {
		return undef;
	}

	return $retval;
}

# unfortunately, we can't use the shell script/batch file because it may
# not have been updated if the user changed the database directory
sub db2ldif {
	my  ($srcDbDir, $ldif, $conf) = @_;

	if ($oldversion == 1) {
		my $dir = "$oldDir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server";
		chdir($dir) or die "Error: could not change directory to $dir: $!";
		my @cmd = ("${quote}$dir${PATHSEP}ldbmcat${exe_suffix}${quote}", '-n',
				   "${quote}$srcDbDir${PATHSEP}id2entry.dbb${quote}");
		open(LDBMCAT, "${quote}@cmd${quote}|") or
			die "Error: could not execute @cmd: $!";
		open(OUTLDIF, "> $ldif") or
			die "Error: could not write to $ldif: $!";
		sleep(1); # allow pipe to fill with data
		$ii = 0; # counter
		while (<LDBMCAT>) {
			print OUTLDIF;
			++$ii;
			if (($ii % 250) == 0) {
				print "  Processed ", $ii, " lines\n";
			}
		}
		close(LDBMCAT);
		close(OUTLDIF);
	} else {
		if (!$conf) {
			$conf = "$oldHome${PATHSEP}config${PATHSEP}slapd.conf";
		}
		my $baseldif = &basename($ldif);
		if ($baseldif eq $ldif) {
			$ldif = "$oldHome${PATHSEP}ldif${PATHSEP}$ldif";
		}
		my $dir = "$oldDir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server";
		chdir($dir) or
			die "Error: could not change directory to $dir: $!";

		my @cmd =
			( "${quote}$oldDir${PATHSEP}bin${PATHSEP}slapd${PATHSEP}server" .
		      "${PATHSEP}$slapdExecName${quote}", "db2ldif", '-n', '-f',
		      "${quote}$conf${quote}", '-a', "${quote}$ldif${quote}",
			  '-d', '1' );
		open(DB2LDIF, "${quote}@cmd${quote} 2>&1|") or
			die "Error: could not execute @cmd: $!";
		sleep(1); # allow pipe to fill with data
		$ii = 0; # counter
		while (<DB2LDIF>) {
			++$ii;
			if (($ii % 250) == 0) {
				print "  Processing...\n";
			}
		}
		close(DB2LDIF);
	}
	print "  Done.\n";
}

# this subroutine works like sed in that it will create another version
# of the input file with some editing done
# the file should be a text file
sub copyAndEditTextFile {
    my $srcFile = shift;
    my $destFile = shift;
    my $sub = shift;
 
    open(SRCFILE, "$srcFile") or die "Error: could not open file $srcFile: $!";
    open(DESTFILE, ">$destFile") or die "Error: could not write file $destFile:
$!";
 
    while (<SRCFILE>) {
        my $newline = &$sub($_);
		if ($newline cmp $_) {
			print "The line: $_";
			print "Was converted to: $newline";
			print "File: $srcFile\n";
		}
        print DESTFILE $newline;
    }
 
    close(SRCFILE);
    close(DESTFILE);
}