From 04e615e5a4d68e3c5165eeb4f9c0bfae25547925 Mon Sep 17 00:00:00 2001 From: Rich Megginson Date: Thu, 8 Feb 2007 18:40:12 +0000 Subject: Resolves: bug 227771 Bug Description: FHS: use sysconfdir (/etc) as config file location Reviewed by: nhosoi (Thanks!) Fix Description: After much deliberation, we have decided that it is ok that our dynamic config files are under /etc/fedora-ds/slapd-instance. So the config_dir will be /etc/fedora-ds/slapd-instance and the security and schema files will go there as well. Since the FHS is ambiguous about this issue, and it will be very confusing if the configuration files are not under /etc, and there are some agents (webmin, cfengine) that do "dynamically" modify config files under /etc, this outweighs any considerations about having the server using it's config file like an "ascii database". In addition, the presence of repl-monitor-cgi causes rpm to complain, and since we only support CGIs in the Admin Server, this file has been removed from the core fedora-ds package. Platforms tested: RHEL4, FC6 Flag Day: no Doc impact: no --- Makefile.am | 1 - Makefile.in | 1 - ldap/admin/src/create_instance.c | 14 +++- ltmain.sh | 162 +++++++++++++++++++++++++-------------- 4 files changed, 115 insertions(+), 63 deletions(-) diff --git a/Makefile.am b/Makefile.am index 0cc821b1..aa04d689 100644 --- a/Makefile.am +++ b/Makefile.am @@ -166,7 +166,6 @@ task_SCRIPTS = ldap/admin/src/scripts/template-bak2db \ ldap/admin/src/scripts/template-ns-activate.pl \ ldap/admin/src/scripts/template-ns-inactivate.pl \ ldap/admin/src/scripts/template-ns-newpwpolicy.pl \ - ldap/admin/src/scripts/template-repl-monitor-cgi.pl \ ldap/admin/src/scripts/template-repl-monitor.pl \ ldap/admin/src/scripts/template-verify-db.pl \ $(srcdir)/ldap/admin/src/scripts/template-migrate5to7 \ diff --git a/Makefile.in b/Makefile.in index 4648a2cf..d6619fd6 100644 --- a/Makefile.in +++ b/Makefile.in @@ -1052,7 +1052,6 @@ task_SCRIPTS = ldap/admin/src/scripts/template-bak2db \ ldap/admin/src/scripts/template-ns-activate.pl \ ldap/admin/src/scripts/template-ns-inactivate.pl \ ldap/admin/src/scripts/template-ns-newpwpolicy.pl \ - ldap/admin/src/scripts/template-repl-monitor-cgi.pl \ ldap/admin/src/scripts/template-repl-monitor.pl \ ldap/admin/src/scripts/template-verify-db.pl \ $(srcdir)/ldap/admin/src/scripts/template-migrate5to7 \ diff --git a/ldap/admin/src/create_instance.c b/ldap/admin/src/create_instance.c index bea8c2ac..dc2a599e 100644 --- a/ldap/admin/src/create_instance.c +++ b/ldap/admin/src/create_instance.c @@ -1737,8 +1737,10 @@ ds_cre_subdirs(server_config_s *cf, struct passwd* pw) gen_script_auto(mysroot, mycs_path, "verify-db.pl", cf) /* tentatively moved to mycs_path */ +#ifdef MOVE_TO_ADMIN_SERVER #define CREATE_REPL_MONITOR_CGI() \ gen_script_auto(mysroot, mycs_path, "repl-monitor-cgi.pl", cf) +#endif #define CREATE_ACCOUNT_INACT(_commandName) \ gen_script_auto(mysroot, cs_path, _commandName, cf) @@ -1897,8 +1899,10 @@ char *ds_gen_scripts(char *sroot, server_config_s *cf, char *cs_path) t = CREATE_VERIFYDB(); if(t) return t; +#ifdef MOVE_TO_ADMIN_SERVER t = CREATE_REPL_MONITOR_CGI(); if(t) return t; +#endif t = CREATE_ACCOUNT_INACT("ns-inactivate.pl"); if(t) return t; @@ -2410,8 +2414,10 @@ char *ds_gen_scripts(char *sroot, server_config_s *cf, char *cs_path) t = CREATE_VERIFYDB(); if(t) return t; +#ifdef MOVE_TO_ADMIN_SERVER t = CREATE_REPL_MONITOR_CGI(); if(t) return t; +#endif t = gen_script(cs_path, "suffix2instance.bat", "@if not \"%%echo%%\" == \"on\" echo off\n\n" @@ -4479,8 +4485,8 @@ int parse_form(server_config_s *cf) temp = ds_a_get_cgi_var("config_dir", NULL, NULL); if (NULL == temp) { - cf->config_dir = PR_smprintf("%s%clib%c%s%c%s-%s", - cf->localstatedir, FILE_PATHSEP, FILE_PATHSEP, + cf->config_dir = PR_smprintf("%s%c%s%c%s-%s", + cf->sysconfdir, FILE_PATHSEP, cf->brand_ds, FILE_PATHSEP, PRODUCT_NAME, cf->servid); } else { @@ -4492,8 +4498,8 @@ int parse_form(server_config_s *cf) cf->schema_dir = ds_a_get_cgi_var("schema_dir", NULL, NULL); temp = ds_a_get_cgi_var("schema_dir", NULL, NULL); if (NULL == temp) { - cf->schema_dir = PR_smprintf("%s%clib%c%s%c%s-%s%cschema", - cf->localstatedir, FILE_PATHSEP, FILE_PATHSEP, + cf->schema_dir = PR_smprintf("%s%c%s%c%s-%s%cschema", + cf->sysconfdir, FILE_PATHSEP, cf->brand_ds, FILE_PATHSEP, PRODUCT_NAME, cf->servid, FILE_PATHSEP); } else { diff --git a/ltmain.sh b/ltmain.sh index 06823e05..0223495a 100644 --- a/ltmain.sh +++ b/ltmain.sh @@ -46,10 +46,16 @@ PACKAGE=libtool VERSION=1.5.22 TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)" -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes. -if test -n "${ZSH_VERSION+set}" ; then +# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac fi # Check that we have a working $echo. @@ -105,12 +111,14 @@ esac # These must not be set unconditionally because not all systems understand # e.g. LANG=C (notably SCO). # We save the old values to restore during execute mode. -if test "${LC_ALL+set}" = set; then - save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL -fi -if test "${LANG+set}" = set; then - save_LANG="$LANG"; LANG=C; export LANG -fi +for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +do + eval "if test \"\${$lt_var+set}\" = set; then + save_$lt_var=\$$lt_var + $lt_var=C + export $lt_var + fi" +done # Make sure IFS has a sensible default lt_nl=' @@ -136,6 +144,8 @@ duplicate_deps=no preserve_args= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" +extracted_archives= +extracted_serial=0 ##################################### # Shell function definitions: @@ -327,7 +337,17 @@ func_extract_archives () *) my_xabs=`pwd`"/$my_xlib" ;; esac my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` - my_xdir="$my_gentop/$my_xlib" + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + extracted_serial=`expr $extracted_serial + 1` + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir="$my_gentop/$my_xlib_u" $show "${rm}r $my_xdir" $run ${rm}r "$my_xdir" @@ -758,6 +778,7 @@ if test -z "$show_help"; then *.f90) xform=f90 ;; *.for) xform=for ;; *.java) xform=java ;; + *.obj) xform=obj ;; esac libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` @@ -1138,8 +1159,9 @@ EOF for arg do case $arg in - -all-static | -static) - if test "X$arg" = "X-all-static"; then + -all-static | -static | -static-libtool-libs) + case $arg in + -all-static) if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 fi @@ -1147,12 +1169,20 @@ EOF dlopen_self=$dlopen_self_static fi prefer_static_libs=yes - else + ;; + -static) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=built - fi + ;; + -static-libtool-libs) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + esac build_libtool_libs=no build_old_libs=yes break @@ -1712,7 +1742,7 @@ EOF continue ;; - -static) + -static | -static-libtool-libs) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects @@ -2490,7 +2520,9 @@ EOF if test "$linkmode,$pass" = "prog,link"; then if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + { { test "$prefer_static_libs" = no || + test "$prefer_static_libs,$installed" = "built,yes"; } || + test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then # Make sure the rpath contains only unique directories. @@ -3186,7 +3218,7 @@ EOF # which has an extra 1 added just for fun # case $version_type in - darwin|linux|osf|windows) + darwin|linux|osf|windows|none) current=`expr $number_major + $number_minor` age="$number_minor" revision="$number_revision" @@ -3410,11 +3442,11 @@ EOF fi # Eliminate all temporary directories. - for path in $notinst_path; do - lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` - deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` - dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` - done +# for path in $notinst_path; do +# lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` +# deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` +# dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` +# done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. @@ -3515,13 +3547,12 @@ EOF int main() { return 0; } EOF $rm conftest - $LTCC $LTCFLAGS -o conftest conftest.c $deplibs - if test "$?" -eq 0 ; then + if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then ldd_output=`ldd conftest` for i in $deplibs; do name=`expr $i : '-l\(.*\)'` # If $name is empty we are operating on a -L argument. - if test "$name" != "" && test "$name" -ne "0"; then + if test "$name" != "" && test "$name" != "0"; then if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $i "*) @@ -3560,9 +3591,7 @@ EOF # If $name is empty we are operating on a -L argument. if test "$name" != "" && test "$name" != "0"; then $rm conftest - $LTCC $LTCFLAGS -o conftest conftest.c $i - # Did it work? - if test "$?" -eq 0 ; then + if $LTCC $LTCFLAGS -o conftest conftest.c $i; then ldd_output=`ldd conftest` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in @@ -3594,7 +3623,7 @@ EOF droppeddeps=yes $echo $echo "*** Warning! Library $i is needed by this library but I was not able to" - $echo "*** make it link in! You will probably need to install it or some" + $echo "*** make it link in! You will probably need to install it or some" $echo "*** library that it depends on before this library will be fully" $echo "*** functional. Installing it before continuing would be even better." fi @@ -4239,12 +4268,14 @@ EOF reload_conv_objs= gentop= # reload_cmds runs $LD directly, so let us get rid of - # -Wl from whole_archive_flag_spec + # -Wl from whole_archive_flag_spec and hope we can get by with + # turning comma into space.. wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then - eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" + eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" + reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` else gentop="$output_objdir/${obj}x" generated="$generated $gentop" @@ -4692,16 +4723,16 @@ static const void *lt_preloaded_setup() { case $host in *cygwin* | *mingw* ) if test -f "$output_objdir/${outputname}.def" ; then - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` else - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` fi ;; * ) - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` ;; esac ;; @@ -4716,13 +4747,13 @@ static const void *lt_preloaded_setup() { # really was required. # Nullify the symbol file. - compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` fi if test "$need_relink" = no || test "$build_libtool_libs" != yes; then # Replace the output file specification. - compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. @@ -4809,7 +4840,7 @@ static const void *lt_preloaded_setup() { if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then - relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` + relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP` else # fast_install is set to needless relink_command= @@ -4846,7 +4877,7 @@ static const void *lt_preloaded_setup() { fi done relink_command="(cd `pwd`; $relink_command)" - relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` fi # Quote $echo for shipping. @@ -5253,6 +5284,18 @@ EOF Xsed='${SED} -e 1s/^X//' sed_quote_subst='$sed_quote_subst' +# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi + # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH @@ -5395,7 +5438,7 @@ else ;; esac $echo >> $output "\ - \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" + \$echo \"\$0: cannot exec \$program \$*\" exit $EXIT_FAILURE fi else @@ -5581,7 +5624,7 @@ fi\ done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` if test "$hardcode_automatic" = yes ; then relink_command= fi @@ -5926,9 +5969,9 @@ relink_command=\"$relink_command\"" if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. - relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP` else - relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP` fi $echo "$modename: warning: relinking \`$file'" 1>&2 @@ -6137,7 +6180,7 @@ relink_command=\"$relink_command\"" file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` outputname="$tmpdir/$file" # Replace the output file specification. - relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` + relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP` $show "$relink_command" if $run eval "$relink_command"; then : @@ -6413,12 +6456,15 @@ relink_command=\"$relink_command\"" fi # Restore saved environment variables - if test "${save_LC_ALL+set}" = set; then - LC_ALL="$save_LC_ALL"; export LC_ALL - fi - if test "${save_LANG+set}" = set; then - LANG="$save_LANG"; export LANG - fi + for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var + else + $lt_unset $lt_var + fi" + done + # Now prepare to actually exec the command. exec_cmd="\$cmd$args" @@ -6775,9 +6821,9 @@ The following components of LINK-COMMAND are treated specially: -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE + try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX - try to export only the symbols matching REGEX + try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened @@ -6791,9 +6837,11 @@ The following components of LINK-COMMAND are treated specially: -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -static do not do any dynamic linking of libtool libraries + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] + specify library version info [each variable defaults to 0] All other options (arguments beginning with \`-') are ignored. -- cgit